This patch added three new members named data_csum, csum_len and
map_csum in struct mptcp_subflow_context, implemented a new function
named mptcp_validate_data_checksum().
If the current mapping is valid and csum is enabled traverse the later
pending skbs and compute csum incrementally till the whole mapping has
been covered. If not enough data is available in the rx queue, return
MAPPING_EMPTY - that is, no data.
Next subflow_data_ready invocation will trigger again csum computation.
When the full DSS is available, validate the csum and return to the
caller an appropriate error code, to trigger subflow reset of fallback
as required by the RFC.
Additionally:
- if the csum prevence in the DSS don't match the negotiated value e.g.
csum present, but not requested, return invalid mapping to trigger
subflow reset.
- keep some csum state, to avoid re-compute the csum on the same data
when multiple rx queue traversal are required.
- clean-up the uncompleted mapping from the receive queue on close, to
allow proper subflow disposal
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag csum_reqd in struct mptcp_options_received, if
the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE
suboption, set this flag.
In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set,
enable the msk->csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new parameter name sk in mptcp_get_options().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member csum_reqd in struct mptcp_out_options and
struct mptcp_subflow_request_sock. Initialized it with the helper
function mptcp_is_checksum_enabled().
In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE
suboption with the MPTCP_CAP_CHECKSUM_REQD flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.
Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we rely on the subflow->data_avail field, which is subject to
races:
ssk1
skb len = 500 DSS(seq=1, len=1000, off=0)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk2
skb len = 500 DSS(seq = 501, len=1000)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk1
skb len = 500 DSS(seq = 1, len=1000, off =500)
# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
# as the skb is covered by a pre-existing map,
# which was in-sequence at reception time.
Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().
Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().
And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.
Fixes: 535fb8152f ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.
If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.
The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a tracepoint in subflow_check_data_avail() to show the
mapping status.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the mapping status function
get_mapping_status() to dump every mpext field.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni suggested to avoid re-syncing new subflows because
they inherit options from listener. In case options were set on
listener but are not set on mptcp-socket there is no need to
do any synchronisation for new subflows.
This change sets sockopt_seq of new mptcp sockets to the seq of
the mptcp listener sock.
Subflow sequence is set to the embedded tcp listener sk.
Add a comment explaing why sk_state is involved in sockopt_seq
generation.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle following cases:
1. setsockopt is called with multiple subflows.
Change might have to be mirrored to all of them.
This is done directly in process context/setsockopt call.
2. Outgoing subflow is created after one or several setsockopt()
calls have been made. Old setsockopt changes should be
synced to the new socket.
3. Incoming subflow, after setsockopt call(s).
Cases 2 and 3 are handled right after the join list is spliced to the conn
list.
Not all sockopt values can be just be copied by value, some require
helper calls. Those can acquire socket lock (which can sleep).
If the join->conn list splicing is done from preemptible context,
synchronization can be done right away, otherwise its deferred to work
queue.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.
In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.
In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are not currently tracking the active MPTCP connection
attempts. Let's add the related counters.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP protocol is unable to create a new token,
the socket fallback to plain TCP, let's keep track
of such events via a specific MIB.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6af1799aaf.
Commit 6af1799aaf ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out
https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
lists potential issues.
Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.
Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.
Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.
Fixes: 6af1799aaf ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the port number is mismatched with the announced ones, use
'goto dispose_child' to free the resources instead of using 'goto out'.
This patch also moves the port number checking code in
subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx
will fail in dispose_child.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_add_pending_subflow() performs a sock_hold() on the subflow,
then adds the subflow to the join list.
Without a sock_put the subflow sk won't be freed in case connect() fails.
unreferenced object 0xffff88810c03b100 (size 3000):
[..]
sk_prot_alloc.isra.0+0x2f/0x110
sk_alloc+0x5d/0xc20
inet6_create+0x2b7/0xd30
__sock_create+0x17f/0x410
mptcp_subflow_create_socket+0xff/0x9c0
__mptcp_subflow_connect+0x1da/0xaf0
mptcp_pm_nl_work+0x6e0/0x1120
mptcp_worker+0x508/0x9a0
Fixes: 5b950ff433 ("mptcp: link MPC subflow into msk only after accept")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPJ subflows are not exposed as fds to user spaces. As such,
incoming MPJ subflows are removed from the accept queue by
tcp_check_req()/tcp_get_cookie_sock().
Later tcp_child_process() invokes subflow_data_ready() on the
parent socket regardless of the subflow kind, leading to poll
wakeups even if the later accept will block.
Address the issue by double-checking the queue state before
waking the user-space.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/164
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the first/initial subflow to the existing functions so they can
pass this on to the notification handler that is added later in the
series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When remote side closes a subflow we should schedule the worker to
dispose of the subflow in a timely manner.
Otherwise, SF_CLOSED event won't be generated until the mptcp
socket itself is closing or local side is closing another subflow.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp subflow route_req() callback performs the subflow
req initialization after the route_req() check. If the latter
fails, mptcp-specific bits of the current request sockets
are left uninitialized.
The above causes bad things at req socket disposal time, when
the mptcp resources are cleared.
This change addresses the issue by splitting subflow_init_req()
into the actual initialization and the mptcp-specific checks.
The initialization is moved before any possibly failing check.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 7ea851d19b ("tcp: merge 'init_req' and 'route_req' functions")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all errors received on msk subflows are ignored.
We need to catch at least the errors on connect() and
on fallback sockets.
Use a custom sk_error_report callback at subflow level,
and do the real action under the msk socket lock - via
the usual sock_owned_by_user()/release_callback() schema.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the mibs for ADD_ADDR with port:
MPTCP_MIB_PORTADD for received ADD_ADDR suboption with a port number.
MPTCP_MIB_PORTSYNRX, MPTCP_MIB_PORTSYNACKRX, MPTCP_MIB_PORTACKRX, for
received MP_JOIN's SYN or SYN/ACK or ACK with a port number which is
different from the msk's port number.
MPTCP_MIB_MISMATCHPORTSYNRX and MPTCP_MIB_MISMATCHPORTACKRX, for
received SYN or ACK MP_JOIN with a mismatched port-number.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helpers, subflow_use_different_sport and
subflow_use_different_dport, to check whether the subflow's source or
destination port number is different from the msk's port number. When
receiving the MP_JOIN's SYN/SYNACK/ACK, we do these port number checks
and print out the different port numbers.
And furthermore, when receiving the MP_JOIN's SYN/ACK, we also use a new
helper mptcp_pm_sport_in_anno_list to check whether this port number is
announced. If it isn't, we need to abort this connection.
This patch also populates the local address's port field in
local_address.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper named subflow_req_create_thmac, which is
extracted from subflow_token_join_request. It initializes subflow_req's
local_nonce and thmac fields, those are the more expensive to populate.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch drops the unused parameter skb in subflow_token_join_request.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch creates a listening socket when an address with a port-number
is added by PM netlink. Then binds the new port to the socket, and
listens for new connections.
When the address is removed or the addresses are flushed by PM netlink,
release the listening socket.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With an IPv4 mapped in v6 socket, we were trying to call inet6_bind()
with an IPv4 address resulting in a -EINVAL error because the given
addr_len -- size of the address structure -- was too short.
We now make sure to use address structures for the same family as the
MPTCP socket for both the bind() and the connect(). It means we convert
v4 addresses to v4 mapped in v6 or the opposite if needed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/122
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On MPTCP-level ack reception, the packet scheduler
may select a subflow other then the current one.
Prior to this commit we rely on the workqueue to trigger
action on such subflow.
This changeset introduces an infrastructure that allows
any MPTCP subflow to schedule actions (MPTCP xmit) on
others subflows without resorting to (multiple) process
reschedule.
A dummy NAPI instance is used instead. When MPTCP needs to
trigger action an a different subflow, it enqueues the target
subflow on the NAPI backlog and schedule such instance as needed.
The dummy NAPI poll method walks the sockets backlog and tries
to acquire the (BH) socket lock on each of them. If the socket
is owned by the user space, the action will be completed by
the sock release cb, otherwise push is started.
This change leverages the delegated action infrastructure
to avoid invoking the MPTCP worker to spool the pending data,
when the packet scheduler picks a subflow other then the one
currently processing the incoming MPTCP-level ack.
Additionally we further refine the subflow selection
invoking the packet scheduler for each chunk of data
even inside __mptcp_subflow_push_pending().
v1 -> v2:
- fix possible UaF at shutdown time, resetting sock ops
after removing the ulp context
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 6e628cd3a8 ("mptcp: use mptcp release_cb for
delayed tasks"), MPTCP never sets the flag bit SOCK_NOSPACE
on its subflow. As a side effect, autotune never takes place,
as it happens inside tcp_new_space(), which in turn is called
only when the mentioned bit is set.
Let's sendmsg() set the subflows NOSPACE bit when looking for
more memory and use the subflow write_space callback to propagate
the snd buf update and wake-up the user-space.
Additionally, this allows dropping a bunch of duplicate code and
makes the SNDBUF_LIMITED chrono relevant again for MPTCP subflows.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, incoming subflows link to the parent socket,
while outgoing ones link to a per subflow socket. The latter
is not really needed, except at the initial connect() time and
for the first subflow.
Always graft the outgoing subflow to the parent socket and
free the unneeded ones early.
This allows some code cleanup, reduces the amount of memory
used and will simplify the next patch
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
When processing options from tcp reset path its possible that
tcp_done(ssk) drops the last reference on the mptcp socket which
results in use-after-free.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It has been observed that the kernel sockets created for the subflows
(except the first one) are not in the same cgroup as their parents.
That's because the additional subflows are created by kernel workers.
This is a problem with eBPF programs attached to the parent's
cgroup won't be executed for the children. But also with any other features
of CGroup linked to a sk.
This patch fixes this behaviour.
As the subflow sockets are created by the kernel, we can't use
'mem_cgroup_sk_alloc' because of the current context being the one of the
kworker. This is why we have to do low level memcg manipulation, if
required.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
When a MPTCP listener socket is closed with unaccepted
children pending, the ULP release callback will be invoked,
but nobody will call into __mptcp_close_ssk() on the
corresponding subflow.
As a consequence, at ULP release time, the 'disposable' flag
will be cleared and the subflow context memory will be leaked.
This change addresses the issue always freeing the context if
the subflow is still in the accept queue at ULP release time.
Additionally, this fixes an incorrect code reference in the
related comment.
Note: this fix leverages the changes introduced by the previous
commit.
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph reported the following splat:
WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031
Modules linked in:
CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031
Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f
RSP: 0018:ffffc900037f7948 EFLAGS: 00010293
RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd
RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005
RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f
R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00
R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68
FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0
Call Trace:
__tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433
__mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761
__mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127
mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184
inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434
__sock_release+0xd2/0x280 net/socket.c:596
sock_close+0x15/0x20 net/socket.c:1277
__fput+0x276/0x960 fs/file_table.c:281
task_work_run+0x109/0x1d0 kernel/task_work.c:151
get_signal+0xe8f/0x1d40 kernel/signal.c:2561
arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811
exit_to_user_mode_loop kernel/entry/common.c:161 [inline]
exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191
syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f2ac1254469
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469
RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003
RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c
R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003
After commit 0397c6d85f ("mptcp: keep unaccepted MPC subflow into
join list"), the msk's workqueue and/or PM can touch the MPC
subflow - and acquire its socket lock - even if it's still unaccepted.
If the above event races with the relevant listener socket close, we
can end-up with the above splat.
This change addresses the issue delaying the MPC socket insertion
in conn_list at accept time - that is, partially reverting the
blamed commit.
We must additionally ensure that mptcp_pm_fully_established()
happens after accept() time, or the PM will not be able to
handle properly such event - conn_list could be empty otherwise.
In the receive path, we check the subflow list node to ensure
it is out of the listener queue. Be sure client subflows do
not match transiently such condition moving them into the join
list earlier at creation time.
Since we now have multiple mptcp_pm_fully_established() call sites
from different code-paths, said helper can now race with itself.
Use an additional PM status bit to avoid multiple notifications.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103
Fixes: 0397c6d85f ("mptcp: keep unaccepted MPC subflow into join list"),
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 says:
If the token is unknown or the host wants to refuse subflow establishment
(for example, due to a limit on the number of subflows it will permit),
the receiver will send back a reset (RST) signal, analogous to an unknown
port in TCP, containing an MP_TCPRST option (Section 3.6) with an
"MPTCP specific error" reason code.
mptcp-next doesn't support MP_TCPRST yet, this can be added in another
change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send
a TCP reset if the token in a MP_JOIN request is unknown.
At this time we don't do this, the 3whs completes and the 'new subflow'
is reset afterwards. There are two ways to allow MPTCP to send the
reset.
1. override 'send_synack' callback and emit the rst from there.
The drawback is that the request socket gets inserted into the
listeners queue just to get removed again right away.
2. Send the reset from the 'route_req' function instead.
This avoids the 'add&remove request socket', but route_req lacks the
skb that is required to send the TCP reset.
Instead of just adding the skb to that function for MPTCP sake alone,
Paolo suggested to merge init_req and route_req functions.
This saves one indirection from syn processing path and provides the skb
to the merged function at the same time.
'send reset on unknown mptcp join token' is added in next patch.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have some tasks triggered by the subflow receive path
which require to access the msk socket status, specifically:
mptcp_clean_una() and mptcp_push_pending()
We have almost everything in place to defer to the msk
release_cb such tasks when the msk sock is owned.
Since the worker is no more used to clean the acked data,
for fallback sockets we need to explicitly flush them.
As an added bonus we can move the wake-up code in __mptcp_clean_una(),
simplify a lot mptcp_poll() and move the timer update under
the data lock.
The worker is now used only to process and send DATA_FIN
packets and do the mptcp-level retransmissions.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit 4cf8b7e48a ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Fixes: 4cf8b7e48a ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send timely MPTCP-level ack is somewhat difficult when
the insertion into the msk receive level is performed
by the worker.
It needs TCP-level dup-ack to notify the MPTCP-level
ack_seq increase, as both the TCP-level ack seq and the
rcv window are unchanged.
We can actually avoid processing incoming data with the
worker, and let the subflow or recevmsg() send ack as needed.
When recvmsg() moves the skbs inside the msk receive queue,
the msk space is still unchanged, so tcp_cleanup_rbuf() could
end-up skipping TCP-level ack generation. Anyway, when
__mptcp_move_skbs() is invoked, a known amount of bytes is
going to be consumed soon: we update rcv wnd computation taking
them in account.
Additionally we need to explicitly trigger tcp_cleanup_rbuf()
when recvmsg() consumes a significant amount of the receive buffer.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will simplify all operation dealing with subflows
before accept time (e.g. data fin processing, add_addr).
The join list is already flushed by mptcp_stream_accept()
before returning the newly created msk to the user space.
This also fixes an potential bug present into the old code:
conn_list was manipulated without helding the msk lock
in mptcp_stream_accept().
Tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MPTCP maintains a status bit, MPTCP_SEND_SPACE, that is set when at
least one subflow and the mptcp socket itself are writeable.
mptcp_poll returns EPOLLOUT if the bit is set.
mptcp_sendmsg makes sure MPTCP_SEND_SPACE gets cleared when last write
has used up all subflows or the mptcp socket wmem.
This reworks nospace handling as follows:
MPTCP_SEND_SPACE is replaced with MPTCP_NOSPACE, i.e. inverted meaning.
This bit is set when the mptcp socket is not writeable.
The mptcp-level ack path schedule will then schedule the mptcp worker
to allow it to free already-acked data (and reduce wmem usage).
This will then wake userspace processes that wait for a POLLOUT event.
sendmsg will set MPTCP_NOSPACE only when it has to wait for more
wmem (blocking I/O case).
poll path will set MPTCP_NOSPACE in case the mptcp socket is
not writeable.
Normal tcp-level notification (SOCK_NOSPACE) is only enabled
in case the subflow socket has no available wmem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We must not close the subflows before all the MPTCP level
data, comprising the DATA_FIN has been acked at the MPTCP
level, otherwise we could be unable to retransmit as needed.
__mptcp_wr_shutdown() shutdown is responsible to check for the
correct status and close all subflows. Is called by the output
path after spooling any data and at shutdown/close time.
In a similar way, __mptcp_destroy_sock() is responsible to clean-up
the MPTCP level status, and is called when the msk transition
to TCP_CLOSE.
The protocol level close() does not force anymore the TCP_CLOSE
status, but orphan the msk socket and all the subflows.
Orphaned msk sockets are forciby closed after a timeout or
when all MPTCP-level data is acked.
There is a caveat about keeping the orphaned subflows around:
the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via
tcp_close(). To prevent accessing freed memory on later MPTCP
level operations, the msk acquires a reference to each subflow
socket and prevent subflow_ulp_release() from releasing the
subflow context before __mptcp_destroy_sock().
The additional subflow references are released by __mptcp_done()
and the async ULP release is detected checking ULP ops. If such
field has been already cleared by the ULP release path, the
dangling context is freed directly by __mptcp_done().
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.
In both cases code was added on both sides in the same place
so just keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The msk can close MP_JOIN subflows if the initial handshake
fails. Currently such subflows are kept alive in the
conn_list until the msk itself is closed.
Beyond the wasted memory, we could end-up sending the
DATA_FIN and the DATA_FIN ack on such socket, even after a
reset.
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Additional/MP_JOIN subflows that do not pass some initial handshake
tests currently causes fallback to TCP. That is an RFC violation:
we should instead reset the subflow and leave the the msk untouched.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/91
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
using packetdrill it's possible to observe the same MPTCP DSN being acked
by different subflows with DACK4 and DACK8. This is in contrast with what
specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide
DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack'
variable to make it a property of MPTCP sockets, not TCP subflows.
Fixes: a0c1d0eafd ("mptcp: Use 32-bit DATA_ACK when possible")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently data fin on data packet are not handled properly:
the 'rcv_data_fin_seq' field is interpreted as the last
sequence number carrying a valid data, but for data fin
packet with valid maps we currently store map_seq + map_len,
that is, the next value.
The 'write_seq' fields carries instead the value subseguent
to the last valid byte, so in mptcp_write_data_fin() we
never detect correctly the last DSS map.
Fixes: 7279da6145 ("mptcp: Use MPTCP-level flag for sending DATA_FIN")
Fixes: 1a49b2c2a5 ("mptcp: Handle incoming 32-bit DATA_FIN values")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit
sequence number. When a 32-bit sequence number is received for the
DATA_FIN, it must be expanded to 64 bits before comparing it to the
last acked sequence number. This expansion was missing.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper named mptcp_destroy_common containing the
shared code between mptcp_destroy() and mptcp_sock_destruct().
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the remove announced addr and subflow logic in PM
netlink.
When the PM netlink removes an address, we traverse all the existing msk
sockets to find the relevant sockets.
We add a new list named anno_list in mptcp_pm_data, to record all the
announced addrs. In the traversing, we check if it has been recorded.
If it has been, we trigger the RM_ADDR signal.
We also check if this address is in conn_list. If it is, we remove the
subflow which using this local address.
Since we call mptcp_pm_free_anno_list in mptcp_destroy, we need to move
__mptcp_init_sock before the mptcp_is_enabled check in mptcp_init_sock.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving a DATA_FIN MPTCP option on a TCP FIN packet, the DATA_FIN
information would be stored but the MPTCP worker did not get
scheduled. In turn, the MPTCP socket state would remain in
TCP_ESTABLISHED and no blocked operations would be awakened.
TCP FIN packets are seen by the MPTCP socket when moving skbs out of the
subflow receive queues, so schedule the MPTCP worker when a skb with
DATA_FIN but no data payload is moved from a subflow queue. Other cases
(DATA_FIN on a bare TCP ACK or on a packet with data payload) are
already handled.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/84
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph reported an infinite loop in the subflow receive path
under stress condition.
If there are multiple subflows, each of them using a large send
buffer, the delta between the sequence number used by
MPTCP-level retransmission can and the current msk->ack_seq
can be greater than MAX_INT.
In the above scenario, when calling mptcp_subflow_discard_data(),
such delta will be truncated to int, and could result in a negative
number: no bytes will be dropped, and subflow_check_data_avail()
will try again to process the same packet, looping forever.
This change addresses the issue by expanding the 'limit' size to 64
bits, so that overflows are not possible anymore.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/87
Fixes: 6719331c2f ("mptcp: trigger msk processing even for OoO data")
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
That is needed to let the subflows announce promptly when new
space is available in the receive buffer.
tcp_cleanup_rbuf() is currently a static function, drop the
scope modifier and add a declaration in the TCP header.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the 'backup' attribute of local endpoint
is ignored. Let's use it for the MP_JOIN handshake
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that can be accessed easily from the subflow creation
helper. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a bunch of MPTCP mibs related to MPTCP OoO data
processing.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to use the tcp_read_sock(), we can
simply drop the skb. Additionally try to look at the
next buffer for in order data.
This both simplifies the code and avoid unneeded indirect
calls.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an RB-tree to cope with OoO (at MPTCP level) data.
__mptcp_move_skb() insert into the RB tree "future"
data, eventually coalescing skb as allowed by the
MPTCP DSN.
To simplify sequence accounting, move the DSN inside
the cb.
After successfully enqueuing in sequence data, check
if we can use any data from the RB tree.
Additionally move the data_fin check after spooling
data from the OoO tree, otherwise we could miss shutdown
events.
The RB tree code is copied as verbatim as possible
from tcp_data_queue_ofo(), with a few simplifications
due to the fact that MPTCP doesn't need to cope with
sacks. All bugs here are added by me.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prerequisite to allow receiving data from multiple
subflows without re-injection.
Instead of dropping the OoO - "future" data in
subflow_check_data_avail(), call into __mptcp_move_skbs()
and let the msk drop that.
To avoid code duplication factor out the mptcp_subflow_discard_data()
helper.
Note that __mptcp_move_skbs() can now find multiple subflows
with data avail (comprising to-be-discarded data), so must
update the byte counter incrementally.
v1 -> v2:
- fix checkpatch issues (unsigned -> unsigned int)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This simplify mptcp_subflow_data_available() and will
made follow-up patches simpler.
Additionally remove the unneeded checks on subflow copied_seq:
we always whole skbs out of subflows.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when checking for the 'msk is writable' condition, we
look at the individual subflows write space.
That works well while we send data via a single subflow, but will
not as soon as we will enable concurrent xmit on multiple subflows.
With this change msk becomes writable when the following conditions
hold:
- the socket has some free write space
- there is at least a subflow with write free space
Additionally we need to set the NOSPACE bit on all subflows
before blocking.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit b93df08ccd ("mptcp: explicitly track the fully
established status"), the status of unaccepted mptcp closed in
mptcp_sock_destruct() changes from TCP_SYN_RECV to TCP_ESTABLISHED.
As a result mptcp_sock_destruct() does not perform the proper
cleanup and inet_sock_destruct() will later emit a warn.
Address the issue updating the condition tested in mptcp_sock_destruct().
Also update the related comment.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/66
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Fixes: b93df08ccd ("mptcp: explicitly track the fully established status")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
JOIN requests do not work in syncookie mode -- for HMAC validation, the
peers nonce and the mptcp token (to obtain the desired connection socket
the join is for) are required, but this information is only present in the
initial syn.
So either we need to drop all JOIN requests once a listening socket enters
syncookie mode, or we need to store enough state to reconstruct the request
socket later.
This adds a state table (1024 entries) to store the data present in the
MP_JOIN syn request and the random nonce used for the cookie syn/ack.
When a MP_JOIN ACK passed cookie validation, the table is consulted
to rebuild the request socket from it.
An alternate approach would be to "cancel" syn-cookie mode and force
MP_JOIN to always use a syn queue entry.
However, doing so brings the backlog over the configured queue limit.
v2: use req->syncookie, not (removed) want_cookie arg
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be used to initialize the mptcp request socket when a MP_CAPABLE
request was handled in syncookie mode, i.e. when a TCP ACK containing a
MP_CAPABLE option is a valid syncookie value.
Normally (non-cookie case), MPTCP will generate a unique 32 bit connection
ID and stores it in the MPTCP token storage to be able to retrieve the
mptcp socket for subflow joining.
In syncookie case, we do not want to store any state, so just generate the
unique ID and use it in the reply.
This means there is a small window where another connection could generate
the same token.
When Cookie ACK comes back, we check that the token has not been registered
in the mean time. If it was, the connection needs to fall back to TCP.
Changes in v2:
- use req->syncookie instead of passing 'want_cookie' arg to ->init_req()
(Eric Dumazet)
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syncookie code path needs to create an mptcp request sock.
Prepare for this and add mptcp prefix plus needed export of ops struct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie support is added, we will need to add a variant of
subflow_init_req() helper. It will do almost same thing except
that it will not compute/add a token to the mptcp token tree.
To avoid excess copy&paste, this commit splits away part of the
code into a new helper, __subflow_init_req, that can then be re-used
from the 'no insert' function added in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once syncookie support is added, no state will be stored anymore when the
syn/ack is generated in syncookie mode.
When the ACK comes back, the generated key will be taken from the TCP ACK,
the token is re-generated and inserted into the token tree.
This means we can't retry with a new key when the token is already taken
in the syncookie case.
Therefore, move the retry logic to the caller to prepare for syncookie
support in mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP state machine handles disconnections on non-fallback connections,
but the mptcp_sock still needs to get notified when fallback subflows
disconnect.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.
DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.
The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can easily perform some basic PM-related
adimission checks before creating the child socket.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_send_active_reset() is more prone to transient errors
(memory allocation or xmit queue full): in stress conditions
the kernel may drop the egress packet, and the client will be
stuck.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookie are in use, the TCP stack may feed into
subflow_syn_recv_sock() plain TCP request sockets. We can't
access mptcp_subflow_request_sock-specific fields on such
sockets. Explicitly check the rsk ops to do safe accesses.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned function has several unneeded branches,
handle each case - MP_CAPABLE, MP_JOIN, fallback -
under a single conditional and drop quite a bit of
duplicate code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.
As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.
This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.
Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we do not init the subflow write sequence for
MP_JOIN subflows. This will cause bad mapping being
generated as soon as we will use non backup subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
since commit d47a721520 ("mptcp: fix race in subflow_data_ready()"), it
is possible to observe a regression in MP_JOIN kselftests. For sockets in
TCP_CLOSE state, it's not sufficient to just wake up the main socket: we
also need to ensure that received data are made available to the reader.
Silence the WARN_ON_ONCE() in these cases: it preserves the syzkaller fix
and restores kselftests when they are ran as follows:
# while true; do
> make KBUILD_OUTPUT=/tmp/kselftest TARGETS=net/mptcp kselftest
> done
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: d47a721520 ("mptcp: fix race in subflow_data_ready()")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/47
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When mptcp is used, userspace doesn't read from the tcp (subflow)
socket but from the parent (mptcp) socket receive queue.
skbs are moved from the subflow socket to the mptcp rx queue either from
'data_ready' callback (if mptcp socket can be locked), a work queue, or
the socket receive function.
This means tcp_rcv_space_adjust() is never called and thus no receive
buffer size auto-tuning is done.
An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the
function that moves skbs from subflow to mptcp socket.
While this enabled autotuning, it also meant tuning was done even if
userspace was reading the mptcp socket very slowly.
This adds mptcp_rcv_space_adjust() and calls it after userspace has
read data from the mptcp socket rx queue.
Its very similar to tcp_rcv_space_adjust, with two differences:
1. The rtt estimate is the largest one observed on a subflow
2. The rcvbuf size and window clamp of all subflows is adjusted
to the mptcp-level rcvbuf.
Otherwise, we get spurious drops at tcp (subflow) socket level if
the skbs are not moved to the mptcp socket fast enough.
Before:
time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap
[..]
ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ]
ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ]
ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ]
ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ]
Time: 1396 seconds
After:
ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ]
ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ]
ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ]
ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ]
Time: 296 seconds
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This clean-up the code a bit, reduces the number of
used hooks and indirect call requested, and allow
better error reporting from __mptcp_subflow_connect()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep using MPTCP sockets and a use "dummy mapping" in case of fallback
to regular TCP. When fallback is triggered, skip addition of the MPTCP
option on send.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/11
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/22
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the radix tree with a hash table allocated
at boot time. The radix tree has some shortcoming:
a single lock is contented by all the mptcp operation,
the lookup currently use such lock, and traversing
all the items would require a lock, too.
With hash table instead we trade a little memory to
address all the above - a per bucket lock is used.
To hash the MPTCP sockets, we re-use the msk' sk_node
entry: the MPTCP sockets are never hashed by the stack.
Replace the existing hash proto callbacks with a dummy
implementation, annotating the above constraint.
Additionally refactor the token creation to code to:
- limit the number of consecutive attempts to a fixed
maximum. Hitting a hash bucket with a long chain is
considered a failed attempt
- accept() no longer can fail to token management.
- if token creation fails at connect() time, we do
fallback to TCP (before the connection was closed)
v1 -> v2:
- fix "no newline at end of file" - Jakub
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the missing annotation in some setup-only
functions.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently any MPTCP socket using syn cookies will fallback to
TCP at 3rd ack time. In case of MP_JOIN requests, the RFC mandate
closing the child and sockets, but the existing error paths
do not handle the syncookie scenario correctly.
Address the issue always forcing the child shutdown in case of
MP_JOIN fallback.
Fixes: ae2dd71649 ("mptcp: handle tcp fallback when using syn cookies")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk ownership is transferred to the child socket at
3rd ack time, so that we avoid more lookups later. If the
request does not reach the 3rd ack, the MSK reference is
dropped at request sock release time.
As a side effect, fallback is now tracked by a NULL msk
reference instead of zeroed 'mp_join' field. This will
simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a listening MPTCP socket has unaccepted sockets at close
time, the related msks are freed via mptcp_sock_destruct(),
which in turn does not invoke the proto->destroy() method
nor the mptcp_token_destroy() function.
Due to the above, the child msk socket is not removed from
the token container, leading to later UaF.
Address the issue explicitly removing the token even in the
above error path.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When token lookup on MP_JOIN 3rd ack fails, the server
socket closes with a reset the incoming child. Such socket
has the 'is_mptcp' flag set, but no msk socket associated
- due to the failed lookup.
While crafting the reset packet mptcp_established_options_mp()
will try to dereference the child's master socket, causing
a NULL ptr dereference.
This change addresses the issue with explicit fallback to
TCP in such error path.
Fixes: 729cd6436f ("mptcp: cope better with MP_JOIN failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
There is some ambiguity in the RFC as to whether the ADD_ADDR HMAC is
the rightmost 64 bits of the entire hash or of the leftmost 160 bits
of the hash. The intention, as clarified with the author of the RFC,
is the entire hash.
This change returns the entire hash from
mptcp_crypto_hmac_sha (instead of only the first 160 bits), and moves
any truncation/selection operation on the hash to the caller.
Fixes: 12555a2d97 ("mptcp: use rightmost 64 bits in ADD_ADDR HMAC")
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Todd Malsbary <todd.malsbary@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not
sending 64-bit data-sequence numbers. The 64-bit DSN is only there for
extreme scenarios when a very high throughput subflow is combined with a
long-RTT subflow such that the high-throughput subflow wraps around the
32-bit sequence number space within an RTT of the high-RTT subflow.
It is thus a rare scenario and we should try to use the 32-bit DATA_ACK
instead as long as possible. It allows to reduce the TCP-option overhead
by 4 bytes, thus makes space for an additional SACK-block. It also makes
tcpdumps much easier to read when the DSN and DATA_ACK are both either
32 or 64-bit.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, on MP_JOIN failure we reset the child
socket, but leave the request socket untouched.
tcp_check_req will deal with it according to the
'tcp_abort_on_overflow' sysctl value - by default the
req socket will stay alive.
The above leads to inconsistent behavior on MP JOIN
failure, and bad listener overflow accounting.
This patch addresses the issue leveraging the infrastructure
just introduced to ask the TCP stack to drop the req on
failure.
The child socket is not freed anymore by subflow_syn_recv_sock(),
instead it's moved to a dead state and will be disposed by the
next sock_put done by the TCP stack, so that listener overflow
accounting is not affected by MP JOIN failure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.
Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.
A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().
Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.
This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.
v1 -> v2:
- be more conservative on drop_req initialization (Mat)
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a subflow is created via mptcp_subflow_create_socket(),
a new 'struct socket' is allocated, with a new i_ino value.
When inspecting TCP sockets via the procfs and or the diag
interface, the above ones are not related to the process owning
the MPTCP master socket, even if they are a logical part of it
('ss -p' shows an empty process field)
Additionally, subflows created by the path manager get
the uid/gid from the running workqueue.
Subflows are part of the owning MPTCP master socket, let's
adjust the vfs info to reflect this.
After this patch, 'ss' correctly displays subflows as belonging
to the msk socket creator.
Fixes: 2303f994b3 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning
a not NULL 'child', let's check 'own_req' only if child is
available to avoid an - unharmful - UBSAN splat.
v1 -> v2:
- reference the correct hash
Fixes: 4c8941de78 ("mptcp: avoid flipping mp_capable field in syn_recv_sock()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the MPTCP code uses 2 hooks to process syn-ack
packets, mptcp_rcv_synsent() and the sk_rx_dst_set()
callback.
We can drop the first, moving the relevant code into the
latter, reducing the hooking into the TCP code. This is
also needed by the next patch.
v1 -> v2:
- use local tcp sock ptr instead of casting the sk variable
several times - DaveM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently subflow_finish_connect() changes unconditionally
any msk socket status other than TCP_ESTABLISHED.
If an unblocking connect() races with close(), we can end-up
triggering:
IPv4: Attempt to release TCP socket in state 1 00000000e32b8b7e
when the msk socket is disposed.
Be sure to enter the established status only from SYN_SENT.
Fixes: c3c123d16c ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In MPTCP, the receive window is shared across all subflows, because it
refers to the mptcp-level sequence space.
MPTCP receivers already place incoming packets on the mptcp socket
receive queue and will charge it to the mptcp socket rcvbuf until
userspace consumes the data.
Update __tcp_select_window to use the occupancy of the parent/mptcp
socket instead of the subflow socket in case the tcp socket is part
of a logical mptcp connection.
This commit doesn't change choice of initial window for passive or active
connections.
While it would be possible to change those as well, this adds complexity
(especially when handling MP_JOIN requests). Furthermore, the MPTCP RFC
specifically says that a MPTCP sender 'MUST NOT use the RCV.WND field
of a TCP segment at the connection level if it does not also carry a DSS
option with a Data ACK field.'
SYN/SYNACK packets do not carry a DSS option with a Data ACK field.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need them, as we can use the current ingress opt
data instead. Setting them in syn_recv_sock() may causes
inconsistent mptcp socket status, as per previous commit.
Fixes: cc7972ea19 ("mptcp: parse and emit MP_CAPABLE option according to v1 spec")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If multiple CPUs races on the same req_sock in syn_recv_sock(),
flipping such field can cause inconsistent child socket status.
When racing, the CPU losing the req ownership may still change
the mptcp request socket mp_capable flag while the CPU owning
the request is cloning the socket, leaving the child socket with
'is_mptcp' set but no 'mp_capable' flag.
Such socket will stay with 'conn' field cleared, heading to oops
in later mptcp callback.
Address the issue tracking the fallback status in a local variable.
Fixes: 58b0991962 ("mptcp: create msk early")
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set sk_state to CLOSED, else we will get following:
IPv4: Attempt to release TCP socket in state 3 00000000b95f109e
IPv4: Attempt to release TCP socket in state 10 00000000b95f109e
First one is from inet_sock_destruct(), second one from
mptcp_sk_clone failure handling. Setting sk_state to CLOSED isn't
enough, we also need to orphan sk so it has DEAD flag set.
Otherwise, a very similar warning is printed from inet_sock_destruct().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following snippet (replicated from syzkaller reproducer) generates
warning: "IPv4: Attempt to release TCP socket in state 1".
int main(void) {
struct sockaddr_in sin1 = { .sin_family = 2, .sin_port = 0x4e20,
.sin_addr.s_addr = 0x010000e0, };
struct sockaddr_in sin2 = { .sin_family = 2,
.sin_addr.s_addr = 0x0100007f, };
struct sockaddr_in sin3 = { .sin_family = 2, .sin_port = 0x4e20,
.sin_addr.s_addr = 0x0100007f, };
int r0 = socket(0x2, 0x1, 0x106);
int r1 = socket(0x2, 0x1, 0x106);
bind(r1, (void *)&sin1, sizeof(sin1));
connect(r1, (void *)&sin2, sizeof(sin2));
listen(r1, 3);
return connect(r0, (void *)&sin3, 0x4d);
}
Reason is that the newly generated mptcp socket is closed via the ulp
release of the tcp listener socket when its accept backlog gets purged.
To fix this, delay setting the ESTABLISHED state until after userspace
calls accept and via mptcp specific destructor.
Fixes: 58b0991962 ("mptcp: create msk early")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/9
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed at least until proper MPTCP-Level fin/reset
signalling gets added:
We wake parent when a subflow changes, but we should do this only
when all subflows have closed, not just one.
Schedule the mptcp worker and tell it to check eof state on all
subflows.
Only flag mptcp socket as closed and wake userspace processes blocking
in poll if all subflows have closed.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Exported via same /proc file as the Linux TCP MIB counters, so "netstat -s"
or "nstat" will show them automatically.
The MPTCP MIB counters are allocated in a distinct pcpu area in order to
avoid bloating/wasting TCP pcpu memory.
Counters are allocated once the first MPTCP socket is created in a
network namespace and free'd on exit.
If no sockets have been allocated, all-zero mptcp counters are shown.
The MIB counter list is taken from the multipath-tcp.org kernel, but
only a few counters have been picked up so far. The counter list can
be increased at any time later on.
v2 -> v3:
- remove 'inline' in foo.c files (David S. Miller)
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add ulp-specific diagnostic functions, so that subflow information can be
dumped to userspace programs like 'ss'.
v2 -> v3:
- uapi: use bit macros appropriate for userspace
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subflow creation may be initiated by the path manager when
the primary connection is fully established and a remote
address has been received via ADD_ADDR.
Create an in-kernel sock and use kernel_connect() to
initiate connection.
Passive sockets can't acquire the mptcp socket lock at
subflow creation time, so an additional list protected by
a new spinlock is used to track the MPJ subflows.
Such list is spliced into conn_list tail every time the msk
socket lock is acquired, so that it will not interfere
with data flow on the original connection.
Data flow and connection failover not addressed by this commit.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Process the MP_JOIN option in a SYN packet with the same flow
as MP_CAPABLE but when the third ACK is received add the
subflow to the MPTCP socket subflow list instead of adding it to
the TCP socket accept queue.
The subflow is added at the end of the subflow list so it will not
interfere with the existing subflows operation and no data is
expected to be transmitted on it.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add enough of a path manager interface to allow sending of ADD_ADDR
when an incoming MPTCP connection is created. Capable of sending only
a single IPv4 ADD_ADDR option. The 'pm_data' element of the connection
sock will need to be expanded to handle multiple interfaces and IPv6.
Partial processing of the incoming ADD_ADDR is included so the path
manager notification of that event happens at the proper time, which
involves validating the incoming address information.
This is a skeleton interface definition for events generated by
MPTCP.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
it's still possible for packetdrill to hang in mptcp_sendmsg(), when the
MPTCP socket falls back to regular TCP (e.g. after receiving unsupported
flags/version during the three-way handshake). Adjust MPTCP socket state
earlier, to ensure correct functionality of mptcp_sendmsg() even in case
of TCP fallback.
Fixes: 767d3ded5f ("net: mptcp: don't hang before sending 'MP capable with data'")
Fixes: 1954b86016 ("mptcp: Check connection state before attempting send")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The name is misleading, it actually tracks the 'fully established'
status.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 58b0991962 ("mptcp: create msk early"), the
msk socket is already available at subflow_syn_recv_sock()
time. Let's move there the state update, to mirror more
closely the first subflow state.
The above will also help multiple subflow supports.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch subflow->conn is always != NULL and
is never changed. We can drop a bunch of now unneeded checks.
v1 -> v2:
- rebased on top of commit 2398e3991b ("mptcp: always
include dack if possible.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change moves the mptcp socket allocation from mptcp_accept() to
subflow_syn_recv_sock(), so that subflow->conn is now always set
for the non fallback scenario.
It allows cleaning up a bit mptcp_accept() reducing the additional
locking and will allow fourther cleanup in the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't lock_sock() the mptcp socket from the subflow data_ready callback,
it would result in ABBA deadlock with the subflow socket lock.
We can however grab the spinlock: if that succeeds and the mptcp socket
is not owned at the moment, we can process the new skbs right away
without deferring this to the work queue.
This avoids the schedule_work and hence the small delay until the
work item is processed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only used to discard stale data from the subflow, so move
it where needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
allows us to schedule the work queue to drain the ssk receive queue in
a followup patch.
This is needed to avoid sending all-to-pessimistic mptcp-level
acknowledgements. At this time, the ack_seq is what was last read by
userspace instead of the highest in-sequence number queued for reading.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_MPTCP=y, CONFIG_MPTCP_IPV6=n, and CONFIG_IPV6=m:
ERROR: "mptcp_handle_ipv6_mapped" [net/ipv6/ipv6.ko] undefined!
This does not happen if CONFIG_MPTCP_IPV6=y, as CONFIG_MPTCP_IPV6
selects CONFIG_IPV6, and thus forces CONFIG_IPV6 builtin.
As exporting a symbol for an empty function would be a bit wasteful, fix
this by providing a dummy version of mptcp_handle_ipv6_mapped() for the
CONFIG_MPTCP_IPV6=n case.
Rename mptcp_handle_ipv6_mapped() to mptcpv6_handle_mapped(), to make it
clear this is a pure-IPV6 function, just like mptcpv6_init().
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't deal with syncookie mode yet, the syncookie rx path will create
tcp reqsk, i.e. we get OOB access because we treat tcp reqsk as mptcp reqsk one:
TCP: SYN flooding on port 20002. Sending cookies.
BUG: KASAN: slab-out-of-bounds in subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
Read of size 1 at addr ffff8881167bc148 by task syz-executor099/2120
subflow_syn_recv_sock+0x451/0x4d0 net/mptcp/subflow.c:191
tcp_get_cookie_sock+0xcf/0x520 net/ipv4/syncookies.c:209
cookie_v6_check+0x15a5/0x1e90 net/ipv6/syncookies.c:252
tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1123 [inline]
[..]
Bug can be reproduced via "sysctl net.ipv4.tcp_syncookies=2".
Note that MPTCP should work with syncookies (4th ack would carry needed
state), but it appears better to sort that out in -next so do tcp
fallback for now.
I removed the MPTCP ifdef for tcp_rsk "is_mptcp" member because
if (IS_ENABLED()) is easier to read than "#ifdef IS_ENABLED()/#endif" pair.
Cc: Eric Dumazet <edumazet@google.com>
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mptcp/subflow.c: In function ‘mptcp_subflow_create_socket’:
net/mptcp/subflow.c:624:25: error: ‘struct netns_core’ has no member named ‘sock_inuse’
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch.pl had a few complaints in the last set of MPTCP patches:
ERROR: code indent should use tabs where possible
+^I subflow, sk->sk_family, icsk->icsk_af_ops, target, mapped);$
CHECK: Comparison to NULL could be written "!new_ctx"
+ if (new_ctx == NULL) {
ERROR: "foo * bar" should be "foo *bar"
+static const struct proto_ops * tcp_proto_ops(struct sock *sk)
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the handling of MP_CAPABLE + data option, as per
RFC 6824 bis / RFC 8684: MPTCP v1.
On the server side we can receive the remote key after that the connection
is established. We need to explicitly track the 'missing remote key'
status and avoid emitting a mptcp ack until we get such info.
When a late/retransmitted/OoO pkt carrying MP_CAPABLE[+data] option
is received, we have to propagate the mptcp seq number info to
the msk socket. To avoid ABBA locking issue, explicitly check for
that in recvmsg(), where we own msk and subflow sock locks.
The above also means that an established mp_capable subflow - still
waiting for the remote key - can be 'downgraded' to plain TCP.
Such change could potentially block a reader waiting for new data
forever - as they hook to msk, while later wake-up after the downgrade
will be on subflow only.
The above issue is not handled here, we likely have to get rid of
msk->fallback to handle that cleanly.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements MP_CAPABLE options parsing and writing according
to RFC 6824 bis / RFC 8684: MPTCP v1.
Local key is sent on syn/ack, and both keys are sent on 3rd ack.
MP_CAPABLE messages len are updated accordingly. We need the skbuff to
correctly emit the above, so we push the skbuff struct as an argument
all the way from tcp code to the relevant mptcp callbacks.
When processing incoming MP_CAPABLE + data, build a full blown DSS-like
map info, to simplify later processing. On child socket creation, we
need to record the remote key, if available.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new SEND_SPACE flag to indicate that a subflow has enough space to
accept more data for transmission.
It gets cleared at the end of mptcp_sendmsg() in case ssk has run
below the free watermark.
It is (re-set) from the wspace callback.
This allows us to use msk->flags to determine the poll mask.
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parses incoming DSS options and populates outgoing MPTCP ACK
fields. MPTCP fields are parsed from the TCP option header and placed in
an skb extension, allowing the upper MPTCP layer to access MPTCP
options after the skb has gone through the TCP stack.
The subflow implements its own data_ready() ops, which ensures that the
pending data is in sequence - according to MPTCP seq number - dropping
out-of-seq skbs. The DATA_READY bit flag is set if this is the case.
This allows the MPTCP socket layer to determine if more data is
available without having to consult the individual subflows.
It additionally validates the current mapping and propagates EoF events
to the connection socket.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate the local keys, IDSN, and token when creating a new socket.
Introduce the token tree to track all tokens in use using a radix tree
with the MPTCP token itself as the index.
Override the rebuild_header callback in inet_connection_sock_af_ops for
creating the local key on a new outgoing connection.
Override the init_req callback of tcp_request_sock_ops for creating the
local key on a new incoming connection.
Will be used to obtain the MPTCP parent socket to handle incoming joins.
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request,
to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to
the final ACK of the three-way handshake.
Use the .sk_rx_dst_set() handler in the subflow proto to capture when the
responding SYN-ACK is received and notify the MPTCP connection layer.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ULP to associate a subflow_context structure with each TCP subflow
socket. Creating these sockets requires new bind and connect functions
to make sure ULP is set up immediately when the subflow sockets are
created.
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
