Fix fout being fopen'ed but then not subsequently fclose'd. In the affected
branch, fout is otherwise going out of scope.
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now.
This patch also removes the useless header sys/resource.h from many files
in samples/bpf.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-2-laoar.shao@gmail.com
bpf_object__find_program_by_title is going to be deprecated.
Replace use cases of bpf_object__find_program_by_title in samples/bpf/
with bpf_object__for_each_program.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211214035931.1148209-3-kuifeng@fb.com
This commit refactors the existing cgroup programs with libbpf
bpf loader. Since bpf_program__attach doesn't support cgroup program
attachment, this explicitly attaches cgroup bpf program with
bpf_program__attach_cgroup(bpf_prog, cg1).
Also, to change attach_type of bpf program, this uses libbpf's
bpf_program__set_expected_attach_type helper to switch EGRESS to
INGRESS. To keep bpf program attached to the cgroup hierarchy even
after the exit, this commit uses the BPF_LINK_PINNING to pin the link
attachment even after it is closed.
Besides, this program was broken due to the typo of BPF MAP definition.
But this commit solves the problem by fixing this from 'queue_stats' map
struct hvm_queue_stats -> hbm_queue_stats.
Fixes: 36b5d47113 ("selftests/bpf: samples/bpf: Split off legacy stuff from bpf_helpers.h")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201124090310.24374-2-danieltimlee@gmail.com
Compiling samples/bpf hits an error related to fallthrough marking.
...
CC samples/bpf/hbm.o
samples/bpf/hbm.c: In function ‘main’:
samples/bpf/hbm.c:486:4: error: ‘fallthrough’ undeclared (first use in this function)
fallthrough;
^~~~~~~~~~~
The "fallthrough" is not defined under tools/include directory.
Rather, it is "__fallthrough" is defined in linux/compiler.h.
Including "linux/compiler.h" and using "__fallthrough" fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201006043427.1891805-1-yhs@fb.com
Fix all files in samples/bpf to include libbpf header files with the bpf/
prefix, to be consistent with external users of the library. Also ensure
that all includes of exported libbpf header files (those that are exported
on 'make install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560911.1683545.8795966751309534150.stgit@toke.dk
Currently, under samples, several methods are being used to load bpf
program.
Since using libbpf is preferred solution, lots of previously used
'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr'
from libbpf.
But some of the error messages still show up as 'load_bpf_file' instead
of 'bpf_prog_load_xattr'.
This commit fixes outdated errror messages under samples and fixes some
code style issues.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth
Manager). Includes a new BPF program supporting EDT, and also updates
corresponding programs.
It will drop packets with an EDT of more than 500us in the future
unless the packet belongs to a flow with less than 2 packets in flight.
This is done so each flow has at least 2 packets in flight, so they
will not starve, and also to help prevent delayed ACK timeouts.
It will also work with ECN enabled traffic, where the packets will be
CE marked if their EDT is more than 50us in the future.
The table below shows some performance numbers. The flows are back to
back RPCS. One server sending to another, either 2 or 4 flows.
One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more
than one flow of a given RPC size, the numbers represent averages.
The rate limit applies to all flows (they are in the same cgroup).
Tests ending with "-edt" ran with the new BPF program supporting EDT.
Tests ending with "-hbt" ran on top HBT qdisc with the specified rate
(i.e. no HBM). The other tests ran with the HBM BPF program included
in the HBM patch-set.
EDT has limited value when using DCTCP, but it helps in many cases when
using Cubic. It usually achieves larger link utilization and lower
99% latencies for the 1MB RPCs.
HBM ends up queueing a lot of packets with its default parameter values,
reducing the goodput of the 10KB RPCs and increasing their latency. Also,
the RTTs seen by the flows are quite large.
Aggr 10K 10K 10K 1MB 1MB 1MB
Limit rate drops RTT rate P90 P99 rate P90 P99
Test rate Flows Mbps % us Mbps us us Mbps ms ms
-------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ----
cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5
cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2
dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9
dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0
cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9
cubic 200M 2 155 0.30 220 81 532 655 74 283 450
cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85
dctcp 200M 2 188 0.03 111 77 912 939 111 76 325
dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79
cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50
cubic 1G 4 952 0.03 110 165 516 546 262 38 154
cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79
dctcp 1G 4 951 0.00 103 180 617 905 257 37 38
dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55
cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34
cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17
cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16
dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9
dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26
v1 -> v2: Incorporated Andrii's suggestions
v2 -> v3: Incorporated Yonghong's suggestions
v3 -> v4: Removed credit update that is not needed
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, header inclusion in each file is inconsistent.
For example, "libbpf.h" header is included as multiple ways.
#include "bpf/libbpf.h"
#include "libbpf.h"
Due to commit b552d33c80 ("samples/bpf: fix include path
in Makefile"), $(srctree)/tools/lib/bpf/ path had been included
during build, path "bpf/" in header isn't necessary anymore.
This commit removes path "bpf/" in header inclusion.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is a spelling mistake in the help information, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adds more stats to HBM, including average cwnd and rtt of all TCP
flows, percents of packets that are ecn ce marked and distribution
of return values.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update hbm_out_kern.c to support returning cn notifications.
Also updates relevant files to allow disabling cn notifications.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are a couple of typos, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.
USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
[-w] [-h] [prog]
Where:
-d Print BPF trace debug buffer
-l Also limit flows doing loopback
-n <#> To create cgroup "/hbm#" and attach prog. Default is /nrm1
This is convenient when testing HBM in more than 1 cgroup
-r <rate> Rate limit in Mbps
-s Get HBM stats (marked, dropped, etc.)
-t <time> Exit after specified seconds (deault is 0)
-w Work conserving flag. cgroup can increase its bandwidth
beyond the rate limit specified while there is available
bandwidth. Current implementation assumes there is only
NIC (eth0), but can be extended to support multiple NICs.
Currrently only supported for egress. Note, this is just
a proof of concept.
-h Print this info
prog BPF program file name. Name defaults to hbm_out_kern.o
More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko