many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzBQAKCRCRxhvAZXjc
ot+3AQCZw1PBD4azVxFMWH76qwlAGoVIFug4+ogKU/iUa4VLygEA2FJh1vLJw5iI
LpgBEIUTPVkwtzinAW94iJJo1Vr7NAI=
=p6PB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzXQAKCRCRxhvAZXjc
ogOtAQDpqUp1zY4dV/dZisCJ5xarZTsSZ1AvgmcxZBtS0NhbdgEAshWvYGA9ryS/
ChL5jjtjjZDLhRA//reoFHTQIrdp2w8=
=bF+R
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
The IPv6 network stack first checks the sockaddr length (-EINVAL error)
before checking the family (-EAFNOSUPPORT error).
This was discovered thanks to commit a549d055a2 ("selftests/landlock:
Add network tests").
Cc: Eric Paris <eparis@parisplace.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com
Fixes: 0f8db8cc73 ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When processing a packed profile in unpack_profile() described like
"profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}"
a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then
passed to aa_splitn_fqname().
aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace.
Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later
aa_alloc_profile() crashes as the new profile name is NULL now.
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
<TASK>
? strlen+0x1e/0xa0
aa_policy_init+0x1bb/0x230
aa_alloc_profile+0xb1/0x480
unpack_profile+0x3bc/0x4960
aa_unpack+0x309/0x15e0
aa_replace_profiles+0x213/0x33c0
policy_update+0x261/0x370
profile_replace+0x20e/0x2a0
vfs_write+0x2af/0xe00
ksys_write+0x126/0x250
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1e/0xa0
It seems such behaviour of aa_splitn_fqname() is expected and checked in
other places where it is called (e.g. aa_remove_profiles). Well, there
is an explicit comment "a ns name without a following profile is allowed"
inside.
AFAICS, nothing can prevent unpacked "name" to be in form like
":samba-dcerpcd" - it is passed from userspace.
Deny the whole profile set replacement in such case and inform user with
EPROTO and an explaining message.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 04dc715e24 ("apparmor: audit policy ns specified in policy load")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
If we fail to unpack the transition table then the table elements which
have been already allocated are not freed on error path.
unreferenced object 0xffff88802539e000 (size 128):
comm "apparmor_parser", pid 903, jiffies 4294914938 (age 35.085s)
hex dump (first 32 bytes):
20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74 72 69 some nasty stri
6e 67 20 73 6f 6d 65 20 6e 61 73 74 79 20 73 74 ng some nasty st
backtrace:
[<ffffffff81ddb312>] __kmem_cache_alloc_node+0x1e2/0x2d0
[<ffffffff81c47194>] __kmalloc_node_track_caller+0x54/0x170
[<ffffffff81c225b9>] kmemdup+0x29/0x60
[<ffffffff83e1ee65>] aa_unpack_strdup+0xe5/0x1b0
[<ffffffff83e20808>] unpack_pdb+0xeb8/0x2700
[<ffffffff83e23567>] unpack_profile+0x1507/0x4a30
[<ffffffff83e27bfa>] aa_unpack+0x36a/0x1560
[<ffffffff83e194c3>] aa_replace_profiles+0x213/0x33c0
[<ffffffff83de9461>] policy_update+0x261/0x370
[<ffffffff83de978e>] profile_replace+0x20e/0x2a0
[<ffffffff81eac8bf>] vfs_write+0x2af/0xe00
[<ffffffff81eaddd6>] ksys_write+0x126/0x250
[<ffffffff88f34fb6>] do_syscall_64+0x46/0xf0
[<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
Call aa_free_str_table() on error path as was done before the blamed
commit. It implements all necessary checks, frees str_table if it is
available and nullifies the pointers.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a0792e2ced ("apparmor: make transition table unpack generic so it can be reused")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.
Basic mount rules like
allow mount,
allow mount options=(move) -> /target/,
will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
allow mount detached -> /target/,
In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.
Note: this fixes mediation of move_mount when a detached mount is used,
it does not fix the broader regression of apparmor mediation of
mounts under the new mount api.
Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6 ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This call is now going through a function pointer,
and it is not as obvious any more that it will be inlined.
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-4-gnoack@google.com
Fixes: 7a11275c37 ("landlock: Refactor layer helpers")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 6.6]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 6.1]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
For module-internal static functions, compilers are already in a good
position to decide whether to inline them or not.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20231208155121.1943775-2-gnoack@google.com
[mic: Split patch for Linux 5.15]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
apparmor_task_kill was not putting the task_cred reference tc, or the
cred_label reference tc when dealing with a passed in cred, fix this
by using a single fn exit.
Fixes: 90c436a64a ("apparmor: pass cred through to audit info.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
A trivial correction to convert an 'unsigned' parameter into an
'unsigned int' parameter so the prototype matches the function
definition.
I really thought that someone submitted a patch for this a few years
ago but sadly I can't find it now.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
As part of on ongoing effort to perform more automated testing and
provide more tools for individual developers to validate their
patches before submitting, we are trying to make our code
"clang-format clean". My hope is that once we have fixed all of our
style "quirks", developers will be able to run clang-format on their
patches to help avoid silly formatting problems and ensure their
changes fit in well with the rest of the SELinux kernel code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f476 ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Then when specifying '-d' for kexec_file_load interface, loaded locations
of kernel/initrd/cmdline etc can be printed out to help debug.
Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file
loading related codes.
And also print out type/start/head of kimage and flags to help debug.
Link: https://lkml.kernel.org/r/20231213055747.61826-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Identify EVM unsupported filesystems by defining a new flag
SB_I_EVM_UNSUPPORTED.
Don't verify, write, remove or update 'security.evm' on unsupported
filesystems.
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The security.evm HMAC and the original file signatures contain
filesystem specific data. As a result, the HMAC and signature
are not the same on the stacked and backing filesystems.
Don't copy up 'security.evm'.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for pre-content permission events with file access range,
move fsnotify_file_perm() hook out of security_file_permission() and into
the callers.
Callers that have the access range information call the new hook
fsnotify_file_area_perm() with the access range.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-6-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
We would like to make changes to the fsnotify access permission hook -
add file range arguments and add the pre modify event.
In preparation for these changes, split the fsnotify_perm() hook into
fsnotify_open_perm() and fsnotify_file_perm().
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit d9250dea3f ("SELinux: add boundary support and thread
context assignment"), SELinux has been supporting assigning per-thread
security context under a constraint and the comment was updated
accordingly. However, seems like commit d84f4f992c ("CRED: Inaugurate
COW credentials") accidentally brought the old comment back that doesn't
match what the code does.
Considering the ease of understanding the code, this patch just removes the
wrong comment.
Fixes: d84f4f992c ("CRED: Inaugurate COW credentials")
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With the removal of the 'iov' argument to import_single_range(), the two
functions are now fully identical. Convert the import_single_range()
callers to import_ubuf(), and remove the former fully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20231204174827.1258875-3-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add check for strsep() in order to transfer the error.
Fixes: cd3bc044af ("KEYS: encrypted: Instantiate key with user-provided decrypted data")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Remove the EXPERIMENTAL from the
IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY Kconfig
now that digitalSignature usage enforcement is set.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
link: https://lore.kernel.org/all/20230508220708.2888510-4-eric.snowberg@oracle.com/
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When the machine keyring is enabled, it may be used as a trust source
for the .ima keyring. Add a reference to this in
IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Drop useless partial kernel doc style comments. Finish/update kerneldoc
comment where there is useful information
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently, SELinux doesn't allow distinguishing between kernel threads
and userspace processes that are started before the policy is first
loaded - both get the label corresponding to the kernel SID. The only
way a process that persists from early boot can get a meaningful label
is by doing a voluntary dyntransition or re-executing itself.
Reusing the kernel label for userspace processes is problematic for
several reasons:
1. The kernel is considered to be a privileged domain and generally
needs to have a wide range of permissions allowed to work correctly,
which prevents the policy writer from effectively hardening against
early boot processes that might remain running unintentionally after
the policy is loaded (they represent a potential extra attack surface
that should be mitigated).
2. Despite the kernel being treated as a privileged domain, the policy
writer may want to impose certain special limitations on kernel
threads that may conflict with the requirements of intentional early
boot processes. For example, it is a good hardening practice to limit
what executables the kernel can execute as usermode helpers and to
confine the resulting usermode helper processes. However, a
(legitimate) process surviving from early boot may need to execute a
different set of executables.
3. As currently implemented, overlayfs remembers the security context of
the process that created an overlayfs mount and uses it to bound
subsequent operations on files using this context. If an overlayfs
mount is created before the SELinux policy is loaded, these "mounter"
checks are made against the kernel context, which may clash with
restrictions on the kernel domain (see 2.).
To resolve this, introduce a new initial SID (reusing the slot of the
former "init" initial SID) that will be assigned to any userspace
process started before the policy is first loaded. This is easy to do,
as we can simply label any process that goes through the
bprm_creds_for_exec LSM hook with the new init-SID instead of
propagating the kernel SID from the parent.
To provide backwards compatibility for existing policies that are
unaware of this new semantic of the "init" initial SID, introduce a new
policy capability "userspace_initial_context" and set the "init" SID to
the same context as the "kernel" SID unless this capability is set by
the policy.
Another small backwards compatibility measure is needed in
security_sid_to_context_core() for before the initial SELinux policy
load - see the code comment for explanation.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: edited comments based on feedback/discussion]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In four separate functions within avtab, the same comparison logic is
used. The only difference is how the result is handled or whether there
is a unique specifier value to be checked for or used.
Extracting this functionality into the avtab_node_cmp() function unifies
the comparison logic between searching and insertion and gets rid of
duplicative code so that the implementation is easier to maintain.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When the cred was explicit passed through to aa_may_ptrace() the
kernel-doc comment was not properly updated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040508.AUhi04RY-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
With the conversion to a refcounted pdb the nulldfa is now only used
in security/apparmor/lsm.c so declar it as static.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311092038.lqfYnvmf-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
sha1 is insecure and has colisions, thus it is not useful for even
lightweight policy hash checks. Switch to sha256, which on modern
hardware is fast enough.
Separately as per NIST Policy on Hash Functions, sha1 usage must be
withdrawn by 2030. This config option currently is one of many that
holds up sha1 usage.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Using full_name_hash() instead of partial_name_hash() should result
in cleaner and better performing code.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On policy reload selinuxfs replaces two subdirectories (/booleans
and /class) with new variants. Unfortunately, that's done with
serious abuses of directory locking.
1) lock_rename() should be done to parents, not to objects being
exchanged
2) there's a bunch of reasons why it should not be done for directories
that do not have a common ancestor; most of those do not apply to
selinuxfs, but even in the best case the proof is subtle and brittle.
3) failure halfway through the creation of /class will leak
names and values arrays.
4) use of d_genocide() is also rather brittle; it's probably not much of
a bug per se, but e.g. an overmount of /sys/fs/selinuxfs/classes/shm/index
with any regular file will end up with leaked mount on policy reload.
Sure, don't do it, but...
Let's stop messing with disconnected directories; just create
a temporary (/.swapover) with no permissions for anyone (on the
level of ->permission() returing -EPERM, no matter who's calling
it) and build the new /booleans and /class in there; then
lock_rename on root and that temporary directory and d_exchange()
old and new both for class and booleans. Then unlock and use
simple_recursive_removal() to take the temporary out; it's much
more robust.
And instead of bothering with separate pathways for freeing
new (on failure halfway through) and old (on success) names/values,
do all freeing in one place. With temporaries swapped with the
old ones when we are past all possible failures.
The only user-visible difference is that /.swapover shows up
(but isn't possible to open, look up into, etc.) for the
duration of policy reload.
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[PM: applied some fixes from Al post merge]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As the kernel test robot helpfully reminded us, all of the lsm_id
instances defined inside the various LSMs should be marked as static.
The one exception is Landlock which uses its lsm_id variable across
multiple source files with an extern declaration in a header file.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As suggested by the kernel test robot, memdup_user() is a better
option than the combo of kmalloc()/copy_from_user().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310270805.2ArE52i5-lkp@intel.com/
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Using the size of a void pointer is much cleaner than
BITS_PER_LONG / 8.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
While we have a lsm_fill_user_ctx() helper function designed to make
life easier for LSMs which return lsm_ctx structs to userspace, we
didn't include all of the buffer length safety checks and buffer
padding adjustments in the helper. This led to code duplication
across the different LSMs and the possibility for mistakes across the
different LSM subsystems. In order to reduce code duplication and
decrease the chances of silly mistakes, we're consolidating all of
this code into the lsm_fill_user_ctx() helper.
The buffer padding is also modified from a fixed 8-byte alignment to
an alignment that matches the word length of the machine
(BITS_PER_LONG / 8).
Signed-off-by: Paul Moore <paul@paul-moore.com>
We should return -EINVAL if the user specifies LSM_FLAG_SINGLE without
supplying a valid lsm_ctx struct buffer.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Zero out all of the size counters in the -E2BIG case (buffer too
small) to help make the current code a bit more robust in the face of
future code changes.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since IMA is not yet an LSM, don't account for it in the LSM_CONFIG_COUNT
calculation, used to limit how many LSMs can invoke security_add_hooks().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add hooks for setselfattr and getselfattr. These hooks are not very
different from their setprocattr and getprocattr equivalents, and
much of the code is shared.
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add hooks for setselfattr and getselfattr. These hooks are not very
different from their setprocattr and getprocattr equivalents, and
much of the code is shared.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: forward ported beyond v6.6 due merge window changes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Implement Smack support for security_[gs]etselfattr.
Refactor the setprocattr hook to avoid code duplication.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add lsm_name_to_attr(), which translates a text string to a
LSM_ATTR value if one is available.
Add lsm_fill_user_ctx(), which fills a struct lsm_ctx, including
the trailing attribute value.
Both are used in module specific components of LSM system calls.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a system call to report the list of Linux Security Modules
that are active on the system. The list is provided as an array
of LSM ID numbers.
The calling application can use this list determine what LSM
specific actions it might take. That might include choosing an
output format, determining required privilege or bypassing
security module specific behavior.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a system call lsm_get_self_attr() to provide the security
module maintained attributes of the current process.
Create a system call lsm_set_self_attr() to set a security
module maintained attribute of the current process.
Historically these attributes have been exposed to user space via
entries in procfs under /proc/self/attr.
The attribute value is provided in a lsm_ctx structure. The structure
identifies the size of the attribute, and the attribute value. The format
of the attribute value is defined by the security module. A flags field
is included for LSM specific information. It is currently unused and must
be 0. The total size of the data, including the lsm_ctx structure and any
padding, is maintained as well.
struct lsm_ctx {
__u64 id;
__u64 flags;
__u64 len;
__u64 ctx_len;
__u8 ctx[];
};
Two new LSM hooks are used to interface with the LSMs.
security_getselfattr() collects the lsm_ctx values from the
LSMs that support the hook, accounting for space requirements.
security_setselfattr() identifies which LSM the attribute is
intended for and passes it along.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use the LSM ID number instead of the LSM name to identify which
security module's attibute data should be shown in /proc/self/attr.
The security_[gs]etprocattr() functions have been changed to expect
the LSM ID. The change from a string comparison to an integer comparison
in these functions will provide a minor performance improvement.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As LSMs are registered add their lsm_id pointers to a table.
This will be used later for attribute reporting.
Determine the number of possible security modules based on
their respective CONFIG options. This allows the number to be
known at build time. This allows data structures and tables
to use the constant.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a struct lsm_id to contain identifying information about Linux
Security Modules (LSMs). At inception this contains the name of the
module and an identifier associated with the security module. Change
the security_add_hooks() interface to use this structure. Change the
individual modules to maintain their own struct lsm_id and pass it to
security_add_hooks().
The values are for LSM identifiers are defined in a new UAPI
header file linux/lsm.h. Each existing LSM has been updated to
include it's LSMID in the lsm_id.
The LSM ID values are sequential, with the oldest module
LSM_ID_CAPABILITY being the lowest value and the existing modules
numbered in the order they were included in the main line kernel.
This is an arbitrary convention for assigning the values, but
none better presents itself. The value 0 is defined as being invalid.
The values 1-99 are reserved for any special case uses which may
arise in the future. This may include attributes of the LSM
infrastructure itself, possibly related to namespacing or network
attribute management. A special range is identified for such attributes
to help reduce confusion for developers unfamiliar with LSMs.
LSM attribute values are defined for the attributes presented by
modules that are available today. As with the LSM IDs, The value 0
is defined as being invalid. The values 1-99 are reserved for any
special case uses which may arise in the future.
Cc: linux-security-module <linux-security-module@vger.kernel.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
[PM: forward ported beyond v6.6 due merge window changes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
- optimize retrieving current task secid
- add base io_uring mediation
- add base userns mediation
- improve buffer allocation
- allow restricting unprivilege change_profile
+ Cleanups
- Fix kernel doc comments
- remove unused declarations
- remove unused functions
- remove unneeded #ifdef
- remove unused macros
- mark fns static
- cleanup fn with unused return values
- cleanup audit data
- pass cred through to audit data
- refcount the pdb instead of using duplicates
- make SK_CTX macro an inline fn
- some comment cleanups
+ Bug fixes
- fix regression in mount mediation
- fix invalid refenece
- use passed in gfp flags
- advertise avaiability of extended perms and disconnected.path
-----BEGIN PGP SIGNATURE-----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=2BYg
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This adds initial support for mediating io_uring and userns creation.
Adds a new restriction that tightens the use of change_profile, and a
couple of optimizations to reduce performance bottle necks that have
been found when retrieving the current task's secid and allocating
work buffers.
The majority of the patch set continues cleaning up and simplifying
the code (fixing comments, removing now dead functions, and macros
etc). Finally there are 4 bug fixes, with the regression fix having
had a couple months of testing.
Features:
- optimize retrieving current task secid
- add base io_uring mediation
- add base userns mediation
- improve buffer allocation
- allow restricting unprivilege change_profile
Cleanups:
- Fix kernel doc comments
- remove unused declarations
- remove unused functions
- remove unneeded #ifdef
- remove unused macros
- mark fns static
- cleanup fn with unused return values
- cleanup audit data
- pass cred through to audit data
- refcount the pdb instead of using duplicates
- make SK_CTX macro an inline fn
- some comment cleanups
Bug fixes:
- fix regression in mount mediation
- fix invalid refenece
- use passed in gfp flags
- advertise avaiability of extended perms and disconnected.path"
* tag 'apparmor-pr-2023-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (39 commits)
apparmor: Fix some kernel-doc comments
apparmor: Fix one kernel-doc comment
apparmor: Fix some kernel-doc comments
apparmor: mark new functions static
apparmor: Fix regression in mount mediation
apparmor: cache buffers on percpu list if there is lock contention
apparmor: add io_uring mediation
apparmor: add user namespace creation mediation
apparmor: allow restricting unprivileged change_profile
apparmor: advertise disconnected.path is available
apparmor: refcount the pdb
apparmor: provide separate audit messages for file and policy checks
apparmor: pass cred through to audit info.
apparmor: rename audit_data->label to audit_data->subj_label
apparmor: combine common_audit_data and apparmor_audit_data
apparmor: rename SK_CTX() to aa_sock and make it an inline fn
apparmor: Optimize retrieving current task secid
apparmor: remove unused functions in policy_ns.c/.h
apparmor: remove unneeded #ifdef in decompress_zstd()
apparmor: fix invalid reference on profile->disconnected
...
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZUOZKRAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSoaIBAMHG8wxzRcTMplddgQHXmbWPByFIjhA0hqqp
+hEgLFfyAQCqLPi4fW49CokrkynATKXTLMIBfZ37EYZ3llJgveHTDw==
=rPTd
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"A Landlock ruleset can now handle two new access rights:
LANDLOCK_ACCESS_NET_BIND_TCP and LANDLOCK_ACCESS_NET_CONNECT_TCP. When
handled, the related actions are denied unless explicitly allowed by a
Landlock network rule for a specific port.
The related patch series has been reviewed for almost two years, it
has evolved a lot and we now have reached a decent design, code and
testing. The refactored kernel code and the new test helpers also
bring the foundation to support more network protocols.
Test coverage for security/landlock is 92.4% of 710 lines according to
gcc/gcov-13, and it was 93.1% of 597 lines before this series. The
decrease in coverage is due to code refactoring to make the ruleset
management more generic (i.e. dealing with inodes and ports) that also
added new WARN_ON_ONCE() checks not possible to test from user space.
syzkaller has been updated accordingly [4], and such patched instance
(tailored to Landlock) has been running for a month, covering all the
new network-related code [5]"
Link: https://lore.kernel.org/r/20231026014751.414649-1-konstantin.meskhidze@huawei.com [1]
Link: https://lore.kernel.org/r/CAHC9VhS1wwgH6NNd+cJz4MYogPiRV8NyPDd1yj5SpaxeUB4UVg@mail.gmail.com [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=c8dc5ee69d3a [3]
Link: https://github.com/google/syzkaller/pull/4266 [4]
Link: https://storage.googleapis.com/syzbot-assets/82e8608dec36/ci-upstream-linux-next-kasan-gce-root-ab577164.html#security%2flandlock%2fnet.c [5]
* tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add tests for FS topology changes with network rules
landlock: Document network support
samples/landlock: Support TCP restrictions
selftests/landlock: Add network tests
selftests/landlock: Share enforce_ruleset() helper
landlock: Support network rules with TCP bind and connect
landlock: Refactor landlock_add_rule() syscall
landlock: Refactor layer helpers
landlock: Move and rename layer helpers
landlock: Refactor merge/inherit_ruleset helpers
landlock: Refactor landlock_find_rule/insert_rule helpers
landlock: Allow FS topology changes for domains without such rule type
landlock: Make ruleset's access masks more generic
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZUDyWhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QtIAPwLSdHw2qix1A6lMhbRiXqFOWINHcTF
DMtZkiPmpeuTKAEA0KaXfddKq5OC5S/ixPEEZCVqOq2ixxfMDhudyoh/qQs=
=lh3g
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Four integrity changes: two IMA-overlay updates, an integrity Kconfig
cleanup, and a secondary keyring update"
* tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: detect changes to the backing overlay file
certs: Only allow certs signed by keys on the builtin keyring
integrity: fix indentation of config attributes
ima: annotate iint mutex to avoid lockdep false positive warnings
-----BEGIN PGP SIGNATURE-----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=sace
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
Commit 18b44bc5a6 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Fix indentation of config attributes. Attributes are generally
indented with a leading tab(\t) character.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.
Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=a9QY
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Add new credential functions, get_cred_many() and put_cred_many() to
save some atomic_t operations for a few operations.
While not strictly LSM related, this patchset had been rotting on the
mailing lists for some time and since the LSMs do care a lot about
credentials I thought it reasonable to give this patch a home.
- Five patches to constify different LSM hook parameters.
- Fix a spelling mistake.
* tag 'lsm-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix a spelling mistake
cred: add get_cred_many and put_cred_many
lsm: constify 'sb' parameter in security_sb_kern_mount()
lsm: constify 'bprm' parameter in security_bprm_committed_creds()
lsm: constify 'bprm' parameter in security_bprm_committing_creds()
lsm: constify 'file' parameter in security_bprm_creds_from_file()
lsm: constify 'sb' parameter in security_quotactl()
-----BEGIN PGP SIGNATURE-----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=uDFj
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- improve the SELinux debugging configuration controls in Kconfig
- print additional information about the hash table chain lengths when
when printing SELinux debugging information
- simplify the SELinux access vector hash table calcaulations
- use a better hashing function for the SELinux role tansition hash
table
- improve SELinux load policy time through the use of optimized
functions for calculating the number of bits set in a field
- addition of a __counted_by annotation
- simplify the avtab_inert_node() function through a simplified
prototype
* tag 'selinux-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: simplify avtab_insert_node() prototype
selinux: hweight optimization in avtab_read_item
selinux: improve role transition hashing
selinux: simplify avtab slot calculation
selinux: improve debug configuration
selinux: print sum of chain lengths^2 for hash tables
selinux: Annotate struct sidtab_str_cache with __counted_by
This is a small sized pull request. One commit I would like to pinpoint
is my fix for init_trusted() rollback, as for actual patch I did not
receive any feedback. I think it is a no-brainer but can also send a
new pull request if required.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZTcOIBIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JAxgD/QhQdmIkjLPfQu72ZXMOfJliEm1ANBE40
y9HhsqxTBuwBAIws8GaYYDzTV/e/4+sKSPVkIPd9c0VIa/9H7dolZqAM
=BDk0
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This is a small sized pull request. One commit I would like to
pinpoint is my fix for init_trusted() rollback, as for actual patch I
did not receive any feedback"
* tag 'tpmdd-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Remove unused extern declarations
integrity: powerpc: Do not select CA_MACHINE_KEYRING
KEYS: trusted: tee: Refactor register SHM usage
KEYS: trusted: Rollback init_trusted() consistently
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmU/3cUWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJsEoEACBGPSiOmfSWdH3TOnIG270PD24
jGjg8KFv7RC/JTOdYmpLl0okdlGT9LvjN/ToSSDEw3PIayxoXUdhkbYy0MYtiV3m
yz2ozDTzJuplQX/W2fPE+nXSzIwHao2zjPPFjHnT7lt8IIjhgjiOtLfZ2gGUkW99
Mdu2aWh3u0r4tC8OS23++yN5ibRc5l72efsjDWjZ0aPXnxE1bjmLMiIPiizpndIf
beasPuDBs98sJVYouemCwnsPXuXOPz3Q1Cpo/fTd+TMTJCLSemCQZCTuOBU0acI/
ZjLCgCaJU1yIYKBMtrIN4G9kITZniXX3/Nm4o6NQMVlcCqMeNaHuflomqWoqWfhE
UPbRo2eghZOaMNiCKLLvZDIqPrh1IcsiEl6Ef3W4hICc42GTK96IuGisIvDXwQ4N
/SzTOupJuN42noh3z1M3XuZy5RoXJ99IYDNY5CTKf9IdqvA0bbGkU3nb1gZH/xw9
BjTqKzR/7K1kTXuSgagDZ1Wceej9pZxhX7E3IHYsP8ZOvKug3EeL4yybVwQ3HRfq
Qnzcp/qPB9cOkLSQXveRTFTsj2mX28Gixct/iDuc1jIYwGQlY1gI6dcUcqby6ptM
BrQti7eR2NH2+T3aE2UVCIWsZVhx7NaSF+z8JxfAuu56jicc4xJVsi8zrNveWX5M
m2VXyBl3121BVtKi4w==
=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc
okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC
YkBLU3lXqQ87nfu28ExFAzh10hG2jwM=
=m4pB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
Add network rules support in the ruleset management helpers and the
landlock_create_ruleset() syscall. Extend user space API to support
network actions:
* Add new network access rights: LANDLOCK_ACCESS_NET_BIND_TCP and
LANDLOCK_ACCESS_NET_CONNECT_TCP.
* Add a new network rule type: LANDLOCK_RULE_NET_PORT tied to struct
landlock_net_port_attr. The allowed_access field contains the network
access rights, and the port field contains the port value according to
the controlled protocol. This field can take up to a 64-bit value
but the maximum value depends on the related protocol (e.g. 16-bit
value for TCP). Network port is in host endianness [1].
* Add a new handled_access_net field to struct landlock_ruleset_attr
that contains network access rights.
* Increment the Landlock ABI version to 4.
Implement socket_bind() and socket_connect() LSM hooks, which enable
to control TCP socket binding and connection to specific ports.
Expand access_masks_t from u16 to u32 to be able to store network access
rights alongside filesystem access rights for rulesets' handled access
rights.
Access rights are not tied to socket file descriptors but checked at
bind() or connect() call time against the caller's Landlock domain. For
the filesystem, a file descriptor is a direct access to a file/data.
However, for network sockets, we cannot identify for which data or peer
a newly created socket will give access to. Indeed, we need to wait for
a connect or bind request to identify the use case for this socket.
Likewise a directory file descriptor may enable to open another file
(i.e. a new data item), but this opening is also restricted by the
caller's domain, not the file descriptor's access rights [2].
[1] https://lore.kernel.org/r/278ab07f-7583-a4e0-3d37-1bacd091531d@digikod.net
[2] https://lore.kernel.org/r/263c1eb3-602f-57fe-8450-3f138581bee7@digikod.net
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-9-konstantin.meskhidze@huawei.com
[mic: Extend commit message, fix typo in comments, and specify
endianness in the documentation]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Change the landlock_add_rule() syscall to support new rule types with
next commits. Add the add_rule_path_beneath() helper to support current
filesystem rules.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-8-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new key_type argument to the landlock_init_layer_masks() helper.
Add a masks_array_size argument to the landlock_unmask_layers() helper.
These modifications support implementing new rule types in the next
Landlock versions.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-7-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Move and rename landlock_unmask_layers() and landlock_init_layer_masks()
helpers to ruleset.c to share them with Landlock network implementation
in following commits.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-6-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Refactor merge_ruleset() and inherit_ruleset() functions to support new
rule types. Add merge_tree() and inherit_tree() helpers. They use a
specific ruleset's red-black tree according to a key type argument.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-5-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new landlock_key union and landlock_id structure to support a
socket port rule type. A struct landlock_id identifies a unique entry
in a ruleset: either a kernel object (e.g. inode) or typed data (e.g.
TCP port). There is one red-black tree per key type.
Add is_object_pointer() and get_root() helpers. is_object_pointer()
returns true if key type is LANDLOCK_KEY_INODE. get_root() helper
returns a red-black tree root pointer according to a key type.
Refactor landlock_insert_rule() and landlock_find_rule() to support
coming network modifications. Adding or searching a rule in ruleset can
now be done thanks to a Landlock ID argument passed to these helpers.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-4-konstantin.meskhidze@huawei.com
[mic: Fix commit message typo]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Allow mount point and root directory changes when there is no filesystem
rule tied to the current Landlock domain. This doesn't change anything
for now because a domain must have at least a (filesystem) rule, but
this will change when other rule types will come. For instance, a domain
only restricting the network should have no impact on filesystem
restrictions.
Add a new get_current_fs_domain() helper to quickly check filesystem
rule existence for all filesystem LSM hooks.
Remove unnecessary inlining.
Link: https://lore.kernel.org/r/20231026014751.414649-3-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Rename ruleset's access masks and modify it's type to access_masks_t
to support network type rules in following commits. Add filesystem
helper functions to add and get filesystem mask.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231026014751.414649-2-konstantin.meskhidze@huawei.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Since commit b2a4df200d ("KEYS: Expand the capacity of a keyring")
iterate_over_keyring() is never used, so can be removed.
And commit b5f545c880 ("[PATCH] keys: Permit running process to instantiate keys")
left behind keyring_search_instkey().
Fixes: b2a4df200d ("KEYS: Expand the capacity of a keyring")
Fixes: b5f545c880 ("[PATCH] keys: Permit running process to instantiate keys")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
No other platform needs CA_MACHINE_KEYRING, either.
This is policy that should be decided by the administrator, not Kconfig
dependencies.
Cc: stable@vger.kernel.org # v6.6+
Fixes: d7d91c4743 ("integrity: PowerVM machine keyring enablement")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The OP-TEE driver using the old SMC based ABI permits overlapping shared
buffers, but with the new FF-A based ABI each physical page may only
be registered once.
As the key and blob buffer are allocated adjancently, there is no need
for redundant register shared memory invocation. Also, it is incompatibile
with FF-A based ABI limitation. So refactor register shared memory
implementation to use only single invocation to register both key and blob
buffers.
[jarkko: Added cc to stable.]
Cc: stable@vger.kernel.org # v5.16+
Fixes: 4615e5a34b ("optee: add FF-A support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Do bind neither static calls nor trusted_key_exit() before a successful
init, in order to maintain a consistent state. In addition, depart the
init_trusted() in the case of a real error (i.e. getting back something
else than -ENODEV).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-integrity/CAHk-=whOPoLaWM8S8GgoOPT7a2+nMH5h3TLKtn=R_3w4R1_Uvg@mail.gmail.com/
Cc: stable@vger.kernel.org # v5.13+
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Fix some kernel-doc comments to silence the warnings:
security/apparmor/policy.c:117: warning: Function parameter or member 'kref' not described in 'aa_pdb_free_kref'
security/apparmor/policy.c:117: warning: Excess function parameter 'kr' description in 'aa_pdb_free_kref'
security/apparmor/policy.c:882: warning: Function parameter or member 'subj_cred' not described in 'aa_may_manage_policy'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7037
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix one kernel-doc comment to silence the warnings:
security/apparmor/domain.c:46: warning: Function parameter or member 'to_cred' not described in 'may_change_ptraced_domain'
security/apparmor/domain.c:46: warning: Excess function parameter 'cred' description in 'may_change_ptraced_domain'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7036
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix some kernel-doc comments to silence the warnings:
security/apparmor/capability.c:66: warning: Function parameter or member 'ad' not described in 'audit_caps'
security/apparmor/capability.c:66: warning: Excess function parameter 'as' description in 'audit_caps'
security/apparmor/capability.c:154: warning: Function parameter or member 'subj_cred' not described in 'aa_capable'
security/apparmor/capability.c:154: warning: Excess function parameter 'subj_cread' description in 'aa_capable'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7035
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Two new functions were introduced as global functions when they are
only called from inside the file that defines them and should have
been static:
security/apparmor/lsm.c:658:5: error: no previous prototype for 'apparmor_uring_override_creds' [-Werror=missing-prototypes]
security/apparmor/lsm.c:682:5: error: no previous prototype for 'apparmor_uring_sqpoll' [-Werror=missing-prototypes]
Fixes: c4371d9063 ("apparmor: add io_uring mediation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Also, relocate `hdr->raw_pkcs7_len = sig_len;` so that the __counted_by
annotation has effect, and flex-array member `raw_pkcs7` can be properly
bounds-checked at run-time.
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSRaDcJNARUUWUwS@work
Signed-off-by: Kees Cook <keescook@chromium.org>
commit 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
introduced a new move_mount(2) system call and a corresponding new LSM
security_move_mount hook but did not implement this hook for any
existing LSM. This creates a regression for AppArmor mediation of
mount. This patch provides a base mapping of the move_mount syscall to
the existing mount mediation. In the future we may introduce
additional mediations around the new mount calls.
Fixes: 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
CC: stable@vger.kernel.org
Reported-by: Andreas Steinmetz <anstein99@googlemail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
commit df323337e5 ("apparmor: Use a memory pool instead per-CPU caches")
changed buffer allocation to use a memory pool, however on a heavily
loaded machine there can be lock contention on the global buffers
lock. Add a percpu list to cache buffers on when lock contention is
encountered.
When allocating buffers attempt to use cached buffers first,
before taking the global buffers lock. When freeing buffers
try to put them back to the global list but if contention is
encountered, put the buffer on the percpu list.
The length of time a buffer is held on the percpu list is dynamically
adjusted based on lock contention. The amount of hold time is
increased and decreased linearly.
v5:
- simplify base patch by removing: improvements can be added later
- MAX_LOCAL and must lock
- contention scaling.
v4:
- fix percpu ->count buffer count which had been spliced across a
debug patch.
- introduce define for MAX_LOCAL_COUNT
- rework count check and locking around it.
- update commit message to reference commit that introduced the
memory.
v3:
- limit number of buffers that can be pushed onto the percpu
list. This avoids a problem on some kernels where one percpu
list can inherit buffers from another cpu after a reschedule,
causing more kernel memory to used than is necessary. Under
normal conditions this should eventually return to normal
but under pathelogical conditions the extra memory consumption
may have been unbouanded
v2:
- dynamically adjust buffer hold time on percpu list based on
lock contention.
v1:
- cache buffers on percpu list on lock contention
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
For now, the io_uring mediation is limited to sqpoll and
override_creds.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Unprivileged user namespace creation is often used as a first step
in privilege escalation attacks. Instead of disabling it at the
sysrq level, which blocks its legitimate use as for setting up a sandbox,
allow control on a per domain basis.
This allows an admin to quickly lock down a system while also still
allowing legitimate use.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
unprivileged unconfined can use change_profile to alter the confinement
set by the mac admin.
Allow restricting unprivileged unconfined by still allowing change_profile
but stacking the change against unconfined. This allows unconfined to
still apply system policy but allows the task to enter the new confinement.
If unprivileged unconfined is required a sysctl is provided to switch
to the previous behavior.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
While disconnected.path has been available for a while it was never
properly advertised as a feature. Fix this so that userspace doesn't
need special casing to handle it.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
With the move to permission tables the dfa is no longer a stand
alone entity when used, needing a minimum of a permission table.
However it still could be shared among different pdbs each using
a different permission table.
Instead of duping the permission table when sharing a pdb, add a
refcount to the pdb so it can be easily shared.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Improve policy load failure messages by identifying which dfa the
verification check failed in.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The cred is needed to properly audit some messages, and will be needed
in the future for uid conditional mediation. So pass it through to
where the apparmor_audit_data struct gets defined.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
rename audit_data's label field to subj_label to better reflect its
use. Also at the same time drop unneeded assignments to ->subj_label
as the later call to aa_check_perms will do the assignment if needed.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Everywhere where common_audit_data is used apparmor audit_data is also
used. We can simplify the code and drop the use of the aad macro
everywhere by combining the two structures.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
In preparation for LSM stacking rework the macro to an inline fn
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to using the new inode timestamp accessor functions.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-84-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert to using the new inode timestamp accessor functions.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-83-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When running will-it-scale[1] open2_process testcase, in a system with a
large number of cores, a bottleneck in retrieving the current task
secid was detected:
27.73% ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
27.72% 0.01% [kernel.vmlinux] [k] security_current_getsecid_subj - -
27.71% security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
27.71% 27.68% [kernel.vmlinux] [k] apparmor_current_getsecid_subj - -
19.94% __refcount_add (inlined);__refcount_inc (inlined);refcount_inc (inlined);kref_get (inlined);aa_get_label (inlined);aa_get_label (inlined);aa_get_current_label (inlined);apparmor_current_getsecid_subj;security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
7.72% __refcount_sub_and_test (inlined);__refcount_dec_and_test (inlined);refcount_dec_and_test (inlined);kref_put (inlined);aa_put_label (inlined);aa_put_label (inlined);apparmor_current_getsecid_subj;security_current_getsecid_subj;ima_file_check;do_open (inlined);path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_x64 (inlined);do_syscall_64;entry_SYSCALL_64_after_hwframe (inlined);__libc_open64 (inlined)
A large amount of time was spent in the refcount.
The most common case is that the current task label is available, and
no need to take references for that one. That is exactly what the
critical section helpers do, make use of them.
New perf output:
39.12% vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
39.07% 0.13% [kernel.vmlinux] [k] do_dentry_open - -
39.05% do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
38.71% 0.01% [kernel.vmlinux] [k] security_file_open - -
38.70% security_file_open;do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
38.65% 38.60% [kernel.vmlinux] [k] apparmor_file_open - -
38.65% apparmor_file_open;security_file_open;do_dentry_open;vfs_open;path_openat;do_filp_open;do_sys_openat2;__x64_sys_openat;do_syscall_64;entry_SYSCALL_64_after_hwframe;__libc_open64 (inlined)
The result is a throughput improvement of around 20% across the board
on the open2 testcase. On more realistic workloads the impact should
be much less.
[1] https://github.com/antonblanchard/will-it-scale
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
These functions are not used now, remove them.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The whole function is guarded by CONFIG_SECURITY_APPARMOR_EXPORT_BINARY,
so the #ifdef here is redundant, remove it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
For in-kernel consumers one cannot readily assign a user (eg when
running from a workqueue), so the normal key search permissions
cannot be applied.
This patch exports the 'key_lookup()' function for a simple lookup
of keys without checking for permissions.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Static calls invocations aren't well supported from module __init and
__exit functions. Especially the static call from cleanup_trusted() led
to a crash on x86 kernel with CONFIG_DEBUG_VIRTUAL=y.
However, the usage of static call invocations for trusted_key_init()
and trusted_key_exit() don't add any value from either a performance or
security perspective. Hence switch to use indirect function calls instead.
Note here that although it will fix the current crash report, ultimately
the static call infrastructure should be fixed to either support its
future usage from module __init and __exit functions or not.
Reported-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/lkml/ZRhKq6e5nF%2F4ZIV1@fedora/#t
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__hashtab_insert() in hashtab.h has a cleaner interface that allows the
caller to specify the chain node location that the new node is being
inserted into so that it can update the node that currently occupies it.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Changing the direct dependencies of IMA_BLACKLIST_KEYRING and
IMA_LOAD_X509 caused them to no longer depend on IMA, but a
a configuration without IMA results in link failures:
arm-linux-gnueabi-ld: security/integrity/iint.o: in function `integrity_load_keys':
iint.c:(.init.text+0xd8): undefined reference to `ima_load_x509'
aarch64-linux-ld: security/integrity/digsig_asymmetric.o: in function `asymmetric_verify':
digsig_asymmetric.c:(.text+0x104): undefined reference to `ima_blacklist_keyring'
Adding explicit dependencies on IMA would fix this, but a more reliable
way to do this is to enclose the entire Kconfig file in an 'if IMA' block.
This also allows removing the existing direct dependencies.
Fixes: be210c6d35 ("ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The removal of IMA_TRUSTED_KEYRING made IMA_LOAD_X509
and IMA_BLACKLIST_KEYRING unavailable because the latter
two depend on the former. Since IMA_TRUSTED_KEYRING was
deprecated in favor of INTEGRITY_TRUSTED_KEYRING use it
as a dependency for the two Kconfigs affected by the
deprecation.
Fixes: 5087fd9e80 ("ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.
Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The 'bprm_committing_creds' hook has implementations registered in
SELinux and Apparmor. Looking at the function implementations we observe
that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committing_creds()
as 'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The 'bprm_creds_from_file' hook has implementation registered in
commoncap. Looking at the function implementation we observe that the
'file' parameter is not changing.
Mark the 'file' parameter of LSM hook security_bprm_creds_from_file() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux registers the implementation for the "quotactl" hook. Looking at
the function implementation we observe that the parameter "sb" is not
changing.
Mark the "sb" parameter of LSM hook security_quotactl() as "const" since
it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
avtab_read_item() is a hot function called when reading each rule in a
binary policydb. With the current Fedora policy and refpolicy, this
function is called nearly 100,000 times per policy load.
A single avtab node is only permitted to have a single specifier to
describe the data it holds. As such, a check is performed to make sure
only one specifier is set. Previously this was done via a for-loop.
However, there is already an optimal function for finding the number of
bits set (hamming weight) and on some architectures, dedicated
instructions (popcount) which can be executed much more efficiently.
Even when using -mcpu=generic on a x86-64 Fedora 38 VM, this commit
results in a modest 2-4% speedup for policy loading due to a substantial
reduction in the number of instructions executed.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The number of buckets is calculated by performing a binary AND against
the mask of the hash table, which is one less than its size (which is a
power of two). This leads to all top bits being discarded, e.g. with
the Reference Policy on Debian there exists 376 entries, leading to a
size of 512, discarding the top 23 bits.
Use jhash to improve the hash table utilization:
# current
roletr: 376 entries and 124/512 buckets used,
longest chain length 8, sum of chain length^2 1496
# patch
roletr: 376 entries and 266/512 buckets used,
longest chain length 4, sum of chain length^2 646
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line wrap in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Instead of dividing by 8 and then performing log2 by hand, use a more
readable calculation.
The behavior of rounddown_pow_of_two() for an input of 0 is undefined,
so handle that case and small values manually to achieve the same
results.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If the SELinux debug configuration is enabled define the macro DEBUG
such that pr_debug() calls are always enabled, regardless of
CONFIG_DYNAMIC_DEBUG, since those message are the main reason for this
configuration in the first place.
Mention example usage in case CONFIG_DYNAMIC_DEBUG is enabled in the
help section of the configuration.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Print the sum of chain lengths squared as a metric for hash tables to
provide more insights, similar to avtabs.
While on it add a comma in the avtab message to improve readability of
the output.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
selinux_set_mnt_opts() relies on the fact that the mount options pointer
is always NULL when all options are unset (specifically in its
!selinux_initialized() branch. However, the new
selinux_fs_context_submount() hook breaks this rule by allocating a new
structure even if no options are set. That causes any submount created
before a SELinux policy is loaded to be rejected in
selinux_set_mnt_opts().
Fix this by making selinux_fs_context_submount() leave fc->security
set to NULL when there are no options to be copied from the reference
superblock.
Cc: <stable@vger.kernel.org>
Reported-by: Adam Williamson <awilliam@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2236345
Fixes: d80a8f1b58 ("vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct sidtab_str_cache.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: selinux@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZPi3lxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSW+4A/3VcBRAB8/1HTTUulwUMYhF2msyAN6p5TtKl
WGVASdC1AP9NbR2Dh9HwHZmVrlwRbVlqSh9Avi+d0VNQjJKPwvtHBw==
=nU3g
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
-----BEGIN PGP SIGNATURE-----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=ynKT
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-6.6' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Two minor fixes: is a simple spelling fix. The other is a bounds check
for a very likely underflow"
* tag 'Smack-for-6.6' of https://github.com/cschaufler/smack-next:
smackfs: Prevent underflow in smk_set_cipso()
security: smack: smackfs: fix typo (lables->labels)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZO0WoxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5alsAP0UZQIKI2zEjFdtucgClcSouflIOC5i
Hvtgv3qVFXPZQwEA2H/SGjigtH5NruVXECDZdrIfaGGvBhyeY72lbswXfQ0=
=Gu8i
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- With commit 099f26f22f ("integrity: machine keyring CA
configuration") certificates may be loaded onto the IMA keyring,
directly or indirectly signed by keys on either the "builtin" or the
"machine" keyrings.
With the ability for the system/machine owner to sign the IMA policy
itself without needing to recompile the kernel, update the IMA
architecture specific policy rules to require the IMA policy itself
be signed.
[ As commit 099f26f22f was upstreamed in linux-6.4, updating the
IMA architecture specific policy now to require signed IMA policies
may break userspace expectations. ]
- IMA only checked the file data hash was not on the system blacklist
keyring for files with an appended signature (e.g. kernel modules,
Power kernel image).
Check all file data hashes regardless of how it was signed
- Code cleanup, and a kernel-doc update
* tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec_lock: Replace kexec_mutex() by kexec_lock() in two comments
ima: require signed IMA policy when UEFI secure boot is enabled
integrity: Always reference the blacklist keyring with appraisal
ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig
-----BEGIN PGP SIGNATURE-----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=dnm4
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Add proper multi-LSM support for xattrs in the
security_inode_init_security() hook
Historically the LSM layer has only allowed a single LSM to add an
xattr to an inode, with IMA/EVM measuring that and adding its own as
well. As we work towards promoting IMA/EVM to a "proper LSM" instead
of the special case that it is now, we need to better support the
case of multiple LSMs each adding xattrs to an inode and after
several attempts we now appear to have something that is working
well. It is worth noting that in the process of making this change we
uncovered a problem with Smack's SMACK64TRANSMUTE xattr which is also
fixed in this pull request.
- Additional LSM hook constification
Two patches to constify parameters to security_capget() and
security_binder_transfer_file(). While I generally don't make a
special note of who submitted these patches, these were the work of
an Outreachy intern, Khadija Kamran, and that makes me happy;
hopefully it does the same for all of you reading this.
- LSM hook comment header fixes
One patch to add a missing hook comment header, one to fix a minor
typo.
- Remove an old, unused credential function declaration
It wasn't clear to me who should pick this up, but it was trivial,
obviously correct, and arguably the LSM layer has a vested interest
in credentials so I merged it. Sadly I'm now noticing that despite my
subject line cleanup I didn't cleanup the "unsued" misspelling, sigh
* tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: constify the 'file' parameter in security_binder_transfer_file()
lsm: constify the 'target' parameter in security_capget()
lsm: add comment block for security_sk_classify_flow LSM hook
security: Fix ret values doc for security_inode_init_security()
cred: remove unsued extern declaration change_create_files_as()
evm: Support multiple LSMs providing an xattr
evm: Align evm_inode_init_security() definition with LSM infrastructure
smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()
security: Allow all LSMs to provide xattrs for inode_init_security hook
lsm: fix typo in security_file_lock() comment header
-----BEGIN PGP SIGNATURE-----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=XB/b
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Thirty three SELinux patches, which is a pretty big number for us, but
there isn't really anything scary in here; in fact we actually manage
to remove 10 lines of code with this :)
- Promote the SELinux DEBUG_HASHES macro to CONFIG_SECURITY_SELINUX_DEBUG
The DEBUG_HASHES macro was a buried SELinux specific preprocessor
debug macro that was a problem waiting to happen. Promoting the
debug macro to a proper Kconfig setting should help both improve
the visibility of the feature as well enable improved test
coverage. We've moved some additional debug functions under the
CONFIG_SECURITY_SELINUX_DEBUG flag and we may see more work in the
future.
- Emit a pr_notice() message if virtual memory is executable by default
As this impacts the SELinux access control policy enforcement, if
the system's configuration is such that virtual memory is
executable by default we print a single line notice to the console.
- Drop avtab_search() in favor of avtab_search_node()
Both functions are nearly identical so we removed avtab_search()
and converted the callers to avtab_search_node().
- Add some SELinux network auditing helpers
The helpers not only reduce a small amount of code duplication, but
they provide an opportunity to improve UDP flood performance
slightly by delaying initialization of the audit data in some
cases.
- Convert GFP_ATOMIC allocators to GFP_KERNEL when reading SELinux policy
There were two SELinux policy load helper functions that were
allocating memory using GFP_ATOMIC, they have been converted to
GFP_KERNEL.
- Quiet a KMSAN warning in selinux_inet_conn_request()
A one-line error path (re)set patch that resolves a KMSAN warning.
It is important to note that this doesn't represent a real bug in
the current code, but it quiets KMSAN and arguably hardens the code
against future changes.
- Cleanup the policy capability accessor functions
This is a follow-up to the patch which reverted SELinux to using a
global selinux_state pointer. This patch cleans up some artifacts
of that change and turns each accessor into a one-line READ_ONCE()
call into the policy capabilities array.
- A number of patches from Christian Göttsche
Christian submitted almost two-thirds of the patches in this pull
request as he worked to harden the SELinux code against type
differences, variable overflows, etc.
- Support for separating early userspace from the kernel in policy,
with a later revert
We did have a patch that added a new userspace initial SID which
would allow SELinux to distinguish between early user processes
created before the initial policy load and the kernel itself.
Unfortunately additional post-merge testing revealed a problematic
interaction with an old SELinux userspace on an old version of
Ubuntu so we've reverted the patch until we can resolve the
compatibility issue.
- Remove some outdated comments dealing with LSM hook registration
When we removed the runtime disable functionality we forgot to
remove some old comments discussing the importance of LSM hook
registration ordering.
- Minor administrative changes
Stephen Smalley updated his email address and "debranded" SELinux
from "NSA SELinux" to simply "SELinux". We've come a long way from
the original NSA submission and I would consider SELinux a true
community project at this point so removing the NSA branding just
makes sense"
* tag 'selinux-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (33 commits)
selinux: prevent KMSAN warning in selinux_inet_conn_request()
selinux: use unsigned iterator in nlmsgtab code
selinux: avoid implicit conversions in policydb code
selinux: avoid implicit conversions in selinuxfs code
selinux: make left shifts well defined
selinux: update type for number of class permissions in services code
selinux: avoid implicit conversions in avtab code
selinux: revert SECINITSID_INIT support
selinux: use GFP_KERNEL while reading binary policy
selinux: update comment on selinux_hooks[]
selinux: avoid implicit conversions in services code
selinux: avoid implicit conversions in mls code
selinux: use identical iterator type in hashtab_duplicate()
selinux: move debug functions into debug configuration
selinux: log about VM being executable by default
selinux: fix a 0/NULL mistmatch in ad_net_init_from_iif()
selinux: introduce SECURITY_SELINUX_DEBUG configuration
selinux: introduce and use lsm_ad_net_init*() helpers
selinux: update my email address
selinux: add missing newlines in pr_err() statements
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
Contents:
- Restrict linking of keys to .ima and .evm keyrings based on
digitalSignature attribute in the certificate.
- PowerVM: load machine owner keys into the .machine [1] keyring.
- PowerVM: load module signing keys into the secondary trusted keyring
(keys blessed by the vendor).
- tpm_tis_spi: half-duplex transfer mode
- tpm_tis: retry corrupted transfers
- Apply revocation list (.mokx) to an all system keyrings (e.g. .machine
keyring).
[1] https://blogs.oracle.com/linux/post/the-machine-keyring
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZN5/qBIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9J4GQEAstTtQfGGrx5KInOTMWOvaq/Cum5iW4AD
NefVfbUtCCQBANvFtxoPYQS5u6+rIdxzIwFiNUlOyt2uR2bkk4UUiPML
=Vvs8
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Restrict linking of keys to .ima and .evm keyrings based on
digitalSignature attribute in the certificate
- PowerVM: load machine owner keys into the .machine [1] keyring
- PowerVM: load module signing keys into the secondary trusted keyring
(keys blessed by the vendor)
- tpm_tis_spi: half-duplex transfer mode
- tpm_tis: retry corrupted transfers
- Apply revocation list (.mokx) to an all system keyrings (e.g.
.machine keyring)
Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1]
* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: Reference revocation list for all keyrings
tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
tpm: remove redundant variable len
tpm_tis: Resend command to recover from data transfer errors
tpm_tis: Use responseRetry to recover from data transfer errors
tpm_tis: Move CRC check to generic send routine
tpm_tis_spi: Add hardware wait polling
KEYS: Replace all non-returning strlcpy with strscpy
integrity: PowerVM support for loading third party code signing keys
integrity: PowerVM machine keyring enablement
integrity: check whether imputed trust is enabled
integrity: remove global variable from machine_keyring.c
integrity: ignore keys failing CA restrictions on non-UEFI platform
integrity: PowerVM support for loading CA keys on machine keyring
integrity: Enforce digitalSignature usage in the ima and evm keyrings
KEYS: DigitalSignature link restriction
tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"
- Add vfio-ap support to pass-through crypto devices to secure execution
guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is not
possible to figure where a system has been booted from. Existing user
space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmTrqNYACgkQIg7DeRsp
bsKkUBAApWXr3WCJA2tige34AnFwmskx4sBxl/fgwcwJrC55fED1jKWaiXOM6isv
P+hqavZnks3gXZdYcD3kxXkNMh+fPNWw7BAL35J5Gu1VShA/jlbTC6ZrvUO3t+Fy
NsdLvBDbNDdyUzQF7w0Xb0jyIxqhJTRyhLfR5oXES63FHomv2F/vofu4jWR/q+cc
F9mcnoDeN4zLdssdvl6WtPX4nEY9RpG0QOh67drnxuq+8v7sL8gKN4ti94Rp6vhs
g4NhNs9xgRIPoOcX2KlSIdFqO9P12jSXZq0G4HcOp8UGQvgU/mS+UG3pQwV3ZJLS
3/kUJZ4/CwQa1xUFtPGP1/4AngGNOnhT9FCD4KrqjDkRZmLsd5RvURe6L1zQ3vbZ
KnX7q0Otx4xRVYPlbHb9aP+tC7f3Q10ytBAps616qZoA/2SMss2BLZiiPBpCCvDp
L+9dRhBGYCP2PSe6H/qGQFfMW+uY7QF+NDcDAT5mX1lS8OVrGJxqM7Q+sY2pMLGo
5nR16LvM9g6W/ZnsVn0+BWg4CgaPMi+PMfMPxs/o9RG+/0d1AJx1aLSiHdP1pXog
8/Wg4GaaJ27S4Ers0JUmH7VDO+QkkLvAArstjk8l59r1XslWiBP5USebkxtgu6EQ
ehAh0+oa432ALq8Rn1FK/X+pWFumbTVf8OPwR8YEjDbeTPIBCqg=
=ewd9
-----END PGP SIGNATURE-----
Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add vfio-ap support to pass-through crypto devices to secure
execution guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTxQAKCRCRxhvAZXjc
okaVAP94WAlItvDRt/z2Wtzf0+RqPZeTXEdGTxua8+RxqCyYIQD+OO5nRfKQPHlV
AqqGJMKItQMSMIYgB5ftqVhNWZfnHgM=
=pSEW
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct dm_verity_loadpin_trusted_root_digest.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@redhat.com
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Link: https://lore.kernel.org/r/20230817235955.never.762-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
profile->disconnected was storing an invalid reference to the
disconnected path. Fix it by duplicating the string using
aa_unpack_strdup and freeing accordingly.
Fixes: 72c8a76864 ("apparmor: allow profiles to provide info to disconnected paths")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----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=Ghpc
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20230821' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small fix for a potential problem when cleaning up after a failed
SELinux policy load (list next pointer not being properly initialized
to NULL early enough)"
* tag 'selinux-pr-20230821' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: set next pointer before attaching to list
Use the helpers to simplify code.
Link: https://lkml.kernel.org/r/20230728050043.59880-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Set the next pointer in filename_trans_read_helper() before attaching
the new node under construction to the list, otherwise garbage would be
dereferenced on subsequent failure during cleanup in the out goto label.
Cc: <stable@vger.kernel.org>
Fixes: 4300590243 ("selinux: implement new format of filename transitions")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ima_rule_opt_list.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230817210327.never.598-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The value of ipl_cert_list_addr boot variable contains
a physical address, which is used directly. That works
because virtual and physical address spaces are currently
the same, but otherwise it is wrong.
While at it, fix also a comment for the platform keyring.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230816132942.2540411-1-agordeev@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct landlock_rule.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817210257.never.920-kees@kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
On secure boot enabled PowerVM LPAR, third party code signing keys are
needed during early boot to verify signed third party modules. These
third party keys are stored in moduledb object in the Platform
KeyStore (PKS).
Load third party code signing keys onto .secondary_trusted_keys keyring.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Update Kconfig to enable machine keyring and limit to CA certificates
on PowerVM. Only key signing CA keys are allowed.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
trust_moklist() is specific to UEFI enabled systems. Other platforms
rely only on the Kconfig.
Define a generic wrapper named imputed_trust_enabled().
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
trust_mok variable is accessed within a single function locally.
Change trust_mok from global to local static variable.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
On non-UEFI platforms, handle restrict_link_by_ca failures differently.
Certificates which do not satisfy CA restrictions on non-UEFI platforms
are ignored.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Keys that derive their trust from an entity such as a security officer,
administrator, system owner, or machine owner are said to have "imputed
trust". CA keys with imputed trust can be loaded onto the machine keyring.
The mechanism for loading these keys onto the machine keyring is platform
dependent.
Load keys stored in the variable trustedcadb onto the .machine keyring
on PowerVM platform.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After being vouched for by a system keyring, only allow keys into the .ima
and .evm keyrings that have the digitalSignature usage field set.
Link: https://lore.kernel.org/all/41dffdaeb7eb7840f7e38bc691fbda836635c9f9.camel@linux.ibm.com
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
KMSAN reports the following issue:
[ 81.822503] =====================================================
[ 81.823222] BUG: KMSAN: uninit-value in selinux_inet_conn_request+0x2c8/0x4b0
[ 81.823891] selinux_inet_conn_request+0x2c8/0x4b0
[ 81.824385] security_inet_conn_request+0xc0/0x160
[ 81.824886] tcp_v4_route_req+0x30e/0x490
[ 81.825343] tcp_conn_request+0xdc8/0x3400
[ 81.825813] tcp_v4_conn_request+0x134/0x190
[ 81.826292] tcp_rcv_state_process+0x1f4/0x3b40
[ 81.826797] tcp_v4_do_rcv+0x9ca/0xc30
[ 81.827236] tcp_v4_rcv+0x3bf5/0x4180
[ 81.827670] ip_protocol_deliver_rcu+0x822/0x1230
[ 81.828174] ip_local_deliver_finish+0x259/0x370
[ 81.828667] ip_local_deliver+0x1c0/0x450
[ 81.829105] ip_sublist_rcv+0xdc1/0xf50
[ 81.829534] ip_list_rcv+0x72e/0x790
[ 81.829941] __netif_receive_skb_list_core+0x10d5/0x1180
[ 81.830499] netif_receive_skb_list_internal+0xc41/0x1190
[ 81.831064] napi_complete_done+0x2c4/0x8b0
[ 81.831532] e1000_clean+0x12bf/0x4d90
[ 81.831983] __napi_poll+0xa6/0x760
[ 81.832391] net_rx_action+0x84c/0x1550
[ 81.832831] __do_softirq+0x272/0xa6c
[ 81.833239] __irq_exit_rcu+0xb7/0x1a0
[ 81.833654] irq_exit_rcu+0x17/0x40
[ 81.834044] common_interrupt+0x8d/0xa0
[ 81.834494] asm_common_interrupt+0x2b/0x40
[ 81.834949] default_idle+0x17/0x20
[ 81.835356] arch_cpu_idle+0xd/0x20
[ 81.835766] default_idle_call+0x43/0x70
[ 81.836210] do_idle+0x258/0x800
[ 81.836581] cpu_startup_entry+0x26/0x30
[ 81.837002] __pfx_ap_starting+0x0/0x10
[ 81.837444] secondary_startup_64_no_verify+0x17a/0x17b
[ 81.837979]
[ 81.838166] Local variable nlbl_type.i created at:
[ 81.838596] selinux_inet_conn_request+0xe3/0x4b0
[ 81.839078] security_inet_conn_request+0xc0/0x160
KMSAN warning is reproducible with:
* netlabel_mgmt_protocount is 0 (e.g. netlbl_enabled() returns 0)
* CONFIG_SECURITY_NETWORK_XFRM may be set or not
* CONFIG_KMSAN=y
* `ssh USER@HOSTNAME /bin/date`
selinux_skb_peerlbl_sid() will call selinux_xfrm_skb_sid(), then fall
to selinux_netlbl_skbuff_getsid() which will not initialize nlbl_type,
but it will be passed to:
err = security_net_peersid_resolve(nlbl_sid,
nlbl_type, xfrm_sid, sid);
and checked by KMSAN, although it will not be used inside
security_net_peersid_resolve() (at least now), since this function
will check either (xfrm_sid == SECSID_NULL) or (nlbl_sid ==
SECSID_NULL) first and return before using uninitialized nlbl_type.
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
[PM: subject line tweak, removed 'fixes' tag as code is not broken]
Signed-off-by: Paul Moore <paul@paul-moore.com>
BUG_ON_DATA_CORRUPTION is turning detected corruptions of list data
structures from WARNings into BUGs. This can be useful to stop further
corruptions or even exploitation attempts.
However, the option has less to do with debugging than with hardening.
With the introduction of LIST_HARDENED, it makes more sense to move it
to the hardening options, where it selects LIST_HARDENED instead.
Without this change, combining BUG_ON_DATA_CORRUPTION with LIST_HARDENED
alone wouldn't be possible, because DEBUG_LIST would always be selected
by BUG_ON_DATA_CORRUPTION.
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-4-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Numerous production kernel configs (see [1, 2]) are choosing to enable
CONFIG_DEBUG_LIST, which is also being recommended by KSPP for hardened
configs [3]. The motivation behind this is that the option can be used
as a security hardening feature (e.g. CVE-2019-2215 and CVE-2019-2025
are mitigated by the option [4]).
The feature has never been designed with performance in mind, yet common
list manipulation is happening across hot paths all over the kernel.
Introduce CONFIG_LIST_HARDENED, which performs list pointer checking
inline, and only upon list corruption calls the reporting slow path.
To generate optimal machine code with CONFIG_LIST_HARDENED:
1. Elide checking for pointer values which upon dereference would
result in an immediate access fault (i.e. minimal hardening
checks). The trade-off is lower-quality error reports.
2. Use the __preserve_most function attribute (available with Clang,
but not yet with GCC) to minimize the code footprint for calling
the reporting slow path. As a result, function size of callers is
reduced by avoiding saving registers before calling the rarely
called reporting slow path.
Note that all TUs in lib/Makefile already disable function tracing,
including list_debug.c, and __preserve_most's implied notrace has
no effect in this case.
3. Because the inline checks are a subset of the full set of checks in
__list_*_valid_or_report(), always return false if the inline
checks failed. This avoids redundant compare and conditional
branch right after return from the slow path.
As a side-effect of the checks being inline, if the compiler can prove
some condition to always be true, it can completely elide some checks.
Since DEBUG_LIST is functionally a superset of LIST_HARDENED, the
Kconfig variables are changed to reflect that: DEBUG_LIST selects
LIST_HARDENED, whereas LIST_HARDENED itself has no dependency on
DEBUG_LIST.
Running netperf with CONFIG_LIST_HARDENED (using a Clang compiler with
"preserve_most") shows throughput improvements, in my case of ~7% on
average (up to 20-30% on some test cases).
Link: https://r.android.com/1266735 [1]
Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/blob/main/config [2]
Link: https://kernsec.org/wiki/index.php/Kernel_Self_Protection_Project/Recommended_Settings [3]
Link: https://googleprojectzero.blogspot.com/2019/11/bad-binder-android-in-wild-exploit.html [4]
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20230811151847.1594958-3-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
SELinux registers the implementation for the "binder_transfer_file"
hook. Looking at the function implementation we observe that the
parameter "file" is not changing.
Mark the "file" parameter of LSM hook security_binder_transfer_file() as
"const" since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: subject line whitespace fix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The last usage of tomoyo_check_flags() has been removed by commit
57c2590fb7 ("TOMOYO: Update profile structure."). Clean up its
residual declaration.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Use the identical type for local variables, e.g. loop counters.
Declare members of struct policydb_compat_info unsigned to consistently
use unsigned iterators. They hold read-only non-negative numbers in the
global variable policydb_compat.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use umode_t as parameter type for sel_make_inode(), which assigns the
value to the member i_mode of struct inode.
Use identical and unsigned types for loop iterators.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The loops upper bound represent the number of permissions used (for the
current class or in general). The limit for this is 32, thus we might
left shift of one less, 31. Shifting a base of 1 results in undefined
behavior; use (u32)1 as base.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Security classes have only up to 32 permissions, hence using an u16 is
sufficient (while improving padding in struct selinux_mapping).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Return u32 from avtab_hash() instead of int, since the hashing is done
on u32 and the result is used as an index on the hash array.
Use the type of the limit in for loops.
Avoid signed to unsigned conversion of multiplication result in
avtab_hash_eval() and perform multiplication in destination type.
Use unsigned loop iterator for index operations, to avoid sign
extension.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This commit reverts 5b0eea835d ("selinux: introduce an initial SID
for early boot processes") as it was found to cause problems on
distros with old SELinux userspace tools/libraries, specifically
Ubuntu 16.04.
Hopefully we will be able to re-add this functionality at a later
date, but let's revert this for now to help ensure a stable and
backwards compatible SELinux tree.
Link: https://lore.kernel.org/selinux/87edkseqf8.fsf@mail.lhotse
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.
Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.
cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The last usage of PROF_{ADD,REPLACE} were removed by commit 18e99f191a
("apparmor: provide finer control over policy management"). So remove
these two unused macros.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
After changes in commit 33bf60cabc ("LSM: Infrastructure management of
the file security"), aa_alloc_file_ctx() and aa_free_file_ctx() are no
longer used, so remove them, and also remove aa_get_file_label() because
it seems that it's never been used before.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The implementions of these declarations do not exist, remove them all.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
[PATCH -next 05/11] apparmor: Fix kernel-doc warnings in apparmor/label.c
missed updating the Returns comment for the new parameter names
[PATCH -next 05/11] apparmor: Fix kernel-doc warnings in apparmor/label.c
Added the @size parameter comment without mentioning it is a return
value.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Use GFP_KERNEL instead of GFP_ATOMIC while reading a binary policy in
sens_read() and cat_read(), similar to surrounding code.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
After commit f22f9aaf6c ("selinux: remove the runtime disable
functionality"), the comment on selinux_hooks[] is out-of-date,
remove the last paragraph about runtime disable functionality.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There is a upper bound to "catlen" but no lower bound to prevent
negatives. I don't see that this necessarily causes a problem but we
may as well be safe.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
smatch reports
security/keys/sysctl.c:12:18: warning: symbol
'key_sysctls' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
kexec_mutex is replaced by an atomic variable
in 05c6257433 (panic, kexec: make __crash_kexec() NMI safe).
But there are still two comments that referenced kexec_mutex,
replace them by kexec_lock.
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
It should be noted that the destination buffer is zero-initialized and
had a max length of `sizeof(dest) - 1`. There is likely _not_ a bug
present in the current implementation. However, by switching to
`strscpy` we get the benefit of no longer needing the `- 1`'s from the
string copy invocations on top of `strscpy` being a safer interface all
together.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Use u32 as the output parameter type in security_get_classes() and
security_get_permissions(), based on the type of the symtab nprim
member.
Declare the read-only class string parameter of
security_get_permissions() const.
Avoid several implicit conversions by using the identical type for the
destination.
Use the type identical to the source for local variables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: cleanup extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds