Realtek switches can use a reset controller instead of reset-gpios.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'reset-gpios' should not be mandatory. although they might be
required for some devices if the switch reset was left asserted by a
previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds the dt-binding for KSZ8567, a robust 7-port
Ethernet switch. The KSZ8567 features two RGMII/MII/RMII interfaces,
each capable of gigabit speeds, complemented by five 10/100 Mbps
MAC/PHYs.
This binding is necessary to set specific capabilities for this switch
chip that are necessary due to the ksz dsa driver only accepting
specific chip ids.
The KSZ8567 is very similar to KSZ9567 however only containing 100 Mbps
phys on its downstream ports.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240130083419.135763-1-dev@pschenker.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add documentation for selecting reference rmii clock on KSZ88X3 devices
Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Marvell MV88E6060 is one of the oldest DSA switches from
Marvell, and it has DT bindings used in the wild. Let's define
them properly.
It is different enough from the rest of the MV88E6xxx switches
that it deserves its own binding.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-5-272934e04681@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is an attempt to rewrite the Marvell MV88E6xxx switch bindings
in YAML schema.
The current text binding says:
WARNING: This binding is currently unstable. Do not program it into a
FLASH never to be changed again. Once this binding is stable, this
warning will be removed.
Well that never happened before we switched to YAML markup,
we can't have it like this, what about fixing the mess?
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-4-272934e04681@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bindings using dsa.yaml#/$defs/ethernet-ports specify that
a DSA switch node need to have a ports or ethernet-ports
subnode, and that is actually required, so add requirements
using oneOf.
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-1-272934e04681@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts the following commits:
commit 53313ed25b ("dt-bindings: marvell: Add Marvell MV88E6060 DSA schema")
commit 0f35369b4e ("dt-bindings: marvell: Rewrite MV88E6xxx in schema")
commit 605a5f5d40 ("ARM64: dts: marvell: Fix some common switch mistakes")
commit bfedd84236 ("ARM: dts: nxp: Fix some common switch mistakes")
commit 2b83557a58 ("ARM: dts: marvell: Fix some common switch mistakes")
commit ddae07ce9b ("dt-bindings: net: mvusb: Fix up DSA example")
commit b5ef61718a ("dt-bindings: net: dsa: Require ports or ethernet-ports")
As repoted by Vladimir, it breaks boot on the Turris MOX board.
Link: https://lore.kernel.org/all/20231025093632.fb2qdtunzaznd73z@skbuf/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Marvell MV88E6060 is one of the oldest DSA switches from
Marvell, and it has DT bindings used in the wild. Let's define
them properly.
It is different enough from the rest of the MV88E6xxx switches
that it deserves its own binding.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an attempt to rewrite the Marvell MV88E6xxx switch bindings
in YAML schema.
The current text binding says:
WARNING: This binding is currently unstable. Do not program it into a
FLASH never to be changed again. Once this binding is stable, this
warning will be removed.
Well that never happened before we switched to YAML markup,
we can't have it like this, what about fixing the mess?
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bindings using dsa.yaml#/$defs/ethernet-ports specify that
a DSA switch node need to have a ports or ethernet-ports
subnode, and that is actually required, so add requirements
using oneOf.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add wakeup-source property to enable Wake on Lan functionality in the
switch.
Since PME wake pin is not always attached to the SoC, use wakeup-source
instead of wakeup-gpios
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Constraints on 'ethernet-ports' node properties are already defined by the
reference to ethernet-switch.yaml, so they can be dropped from the DSA
schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-8-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'ethernet-port' node unit-addresses should be in hexadecimal. Some
instances have it correct, but fix the ones that don't.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-3-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties or additionalProperties as appropriate.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231016-dt-net-cleanups-v1-1-a525a090b444@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend device tree bindings to support drive strength configuration for the
ksz* switches. Introduced properties:
- microchip,hi-drive-strength-microamp: Controls the drive strength for
high-speed interfaces like GMII/RGMII and more.
- microchip,lo-drive-strength-microamp: Governs the drive strength for
low-speed interfaces such as LEDs, PME_N, and others.
- microchip,io-drive-strength-microamp: Controls the drive strength for
for undocumented Pads on KSZ88xx variants.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
Fix wrong switch name in compatibility list. 88E6163 switch does not exist
and is in fact 88E6361
Fixes: 9229a9483d ("dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
A JSON pointer reference to the entire document must not have a trailing
"/" and should be just a "#". The existing jsonschema package allows
these, but changes in 4.18 make allowed "$ref" URIs stricter and throw
errors on these references.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718203202.1761304-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ksz switch driver allows specifying an interrupt line to prevent
having to periodically poll the switch for link ups/downs and other
asynchronous events.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marvell MV88E6361 is an 8-port switch derived from the
88E6393X/88E9193X/88E6191X switches family. Since its functional behavior
is very close to switches from this family, it can benefit from existing
drivers for this family, so add it to the list of compatible switches
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some boards use SJA1105 Ethernet Switch with SPI CPHA, while ones with
SJA1110 use SPI CPOL, so document this to fix dtbs_check warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as
no immediate child nodes have an address. What was probably intended was
to put them in the 'ports' node, but that's not necessary as that is
covered by ethernet-switch.yaml via dsa.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation for the built-in switch which can be found in the
MediaTek MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
BCM53134 are B53 switches connected by MDIO.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for bindings/net/can
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # for bindings/net/toshiba,visconti-dwmac.yaml
Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Link: https://lore.kernel.org/r/20230320233758.2918972-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM6318, BCM6362 and BCM63268 are SoCs with a B53 MMAP switch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The line endings must be preserved on gpio-controller, io-supply, and
reset-gpios properties to look proper when the YAML file is parsed.
Currently it's interpreted as a single line when parsed. Change the style
of the description of these properties to literal style to preserve the
line endings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix inaccurate information about PHY muxing, and merge standalone and
multi-chip module MT7530 configuration methods.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa.yaml bindings had references that can apply to non-dsa switches. To
prevent duplication of this information, keep the dsa-specific information
inside dsa.yaml and move the remaining generic information to the newly
created ethernet-switch.yaml.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa.yaml contains a reference to dsa-port.yaml, so a duplicate reference to
the binding isn't necessary. Remove this unnecessary reference.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa.yaml binding contains duplicated bindings for address and size
cells, as well as the reference to dsa-port.yaml. Instead of duplicating
this information, remove the reference to dsa-port.yaml and include the
full reference to dsa.yaml.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly allow additional properties for both the ethernet-port and
ethernet-ports properties. This specifically will allow the qca8k.yaml
binding to use shared properties.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA switches can fall into one of two categories: switches where all ports
follow standard '(ethernet-)?port' properties, and switches that have
additional properties for the ports.
The scenario where DSA ports are all standardized can be handled by
switches with a reference to the new 'dsa.yaml#/$defs/ethernet-ports'.
The scenario where DSA ports require additional properties can reference
'$dsa.yaml#' directly. This will allow switches to reference these standard
definitions of the DSA switch, but add additional properties under the port
nodes.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> # realtek
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The children of the switch node don't have a unit address, and therefore
should not need the #address-cells or #size-cells entries. Fix the example
schemas accordingly.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The property use-bcm-hdr was documented as an entry under the ports node
for the bcm_sf2 DSA switch. This property is actually evaluated for each
port. Correct the documentation to match the actual behavior and properly
reference dsa-port.yaml for additional properties of the node.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAINTAINERS file has Andrew Lunn, Florian Fainelli, and Vladimir Oltean
listed as the maintainers for generic dsa bindings. Update dsa.yaml and
dsa-port.yaml accordingly.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "Node|Tree|Generic bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [gG]eneric [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? description\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\? document\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Vinod Koul <vkoul@kernel.org> # phy
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221216163815.522628-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.
Drop trailing "Devicetree bindings" in various forms (also with
trailing full stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \;
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The current DSA maintainers are Florian Fainelli, Andrew Lunn and Vladimir
Oltean. Update the hellcreek binding accordingly.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221212081546.6916-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'reg' without any constraints allows multiple items which is not the
intention in DSA port schema (as physical port is expected to have only
one address).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
