Since struct devlink_fmsg retains error by now (see 1st patch of this
series), there is no longer need to keep returning it in each call.
This is a separate commit to allow per-driver conversion to stop using
those return values.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retain error value in struct devlink_fmsg, to relieve drivers from
checking it after each call.
Note that fmsg is an in-memory builder/buffer of formatted message,
so it's not the case that half baked message was sent somewhere.
We could find following scheme in multiple drivers:
err = devlink_fmsg_obj_nest_start(fmsg);
if (err)
return err;
err = devlink_fmsg_string_pair_put(fmsg, "src", src);
if (err)
return err;
err = devlink_fmsg_something(fmsg, foo, bar);
if (err)
return err;
// and so on...
err = devlink_fmsg_obj_nest_end(fmsg);
With retaining error API that translates to:
devlink_fmsg_obj_nest_start(fmsg);
devlink_fmsg_string_pair_put(fmsg, "src", src);
devlink_fmsg_something(fmsg, foo, bar);
// and so on...
devlink_fmsg_obj_nest_end(fmsg);
What means we check error just when is time to send.
Possible error scenarios are developer error (API misuse) and memory
exhaustion, both cases are good candidates to choose readability
over fastest possible exit.
Note that this patch keeps returning errors, to allow per-driver conversion
to the new API, but those are not needed at this point already.
This commit itself is an illustration of benefits for the dev-user,
more of it will be in separate commits of the series.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a documentation for devlink_rel_nested_in_notify() describing the
devlink instance locking consequences.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to allow to access device pointer without devlink
instance lock held, make sure the device pointer is usable until
devlink_release() is called.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
peernet2id_alloc() allows to be called lockless with peer net pointer
obtained in RCU critical section and makes sure to return ns ID if net
namespaces is not being removed concurrently. Benefit from
read_pnet_rcu() helper addition, use it to obtain net pointer under RCU
read lock and pass it to peernet2id_alloc() to get ns ID.
Fixes: c137743bce ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink health dump get callback should take devlink lock as any other
devlink callback. Otherwise, since devlink_mutex was removed, this
callback is not protected from a race of the reporter being destroyed
while handling the callback.
Add devlink lock to the callback and to any call for
devlink_health_do_dump(). This should be safe as non of the drivers dump
callback implementation takes devlink lock.
As devlink lock is added to any callback of dump, the reporter dump_lock
is now redundant and can be removed.
Fixes: d3efc2a6a6 ("net: devlink: remove devlink_mutex")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mlx5, there is a devlink instance created for PCI device. Also, one
separate devlink instance is created for auxiliary device that
represents the netdev of uplink port. This relation is currently
invisible to the devlink user.
Benefit from the rel infrastructure and allow for nested devlink
instance to set the relationship for the nested-in devlink instance.
Note that there may be many nested instances, therefore use xarray to
hold the list of rel_indexes for individual nested instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from the newly introduced rel infrastructure, treat the linecard
nested devlink instances in the same way as port function instances.
Convert the code to use the rel infrastructure.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.
Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.
This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.
Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a bit tricky to maintain relationship between devlink objects and
nested devlink instances due to following aspects:
1) Locking. It is necessary to lock the devlink instance that contains
the object first, only after that to lock the nested instance.
2) Lifetimes. Objects (e.g devlink port) may be removed before
the nested devlink instance.
3) Notifications. If nested instance changes (e.g. gets
registered/unregistered) the nested-in object needs to send
appropriate notifications.
Resolve this by introducing an xarray that holds 1:1 relationships
between devlink object and related nested devlink instance.
Use that xarray index to get the object/nested devlink instance on
the other side.
Provide necessary helpers:
devlink_rel_nested_in_add/clear() to add and clear the relationship.
devlink_rel_nested_in_notify() to call the nested-in object to send
notifications during nested instance register/unregister/netns
change.
devlink_rel_devlink_handle_put() to be used by nested-in object fill
function to fill the nested handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the next patch is going to call this helper with need to fill another
type of nested attribute, pass it over function arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the next patch is going to call this helper out of the linecard.c,
move to netlink.c.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If netns of devlink instance and nested devlink instance differs,
put netnsid attr to indicate that.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of exposing linecard struct, expose a simple helper to get the
linecard index, which is all is needed outside linecard.c. Move the
linecard struct to linecard.c and keep it private similar to the rest of
the devlink objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At last, move the last bits out of leftover.c,
the devlink_notify_register/unregister() functions to dev.c
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-16-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for the trap code move, use tracepoint_enabled() helper
instead of trace_devlink_trap_report_enabled() which would not be
defined in that scope.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since both dpipe and resource code is using this helper, in preparation
for code split to separate files, move
devlink_dpipe_send_and_alloc_skb() helper into netlink.c. Rename it on
the way.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparations of leftover.c split to individual files, avoid need to
have object structures exposed in devl_internal.h and allow to have them
maintained in object files.
The register/unregister notifications need to know the structures
to iterate lists. To avoid the need, introduce per-object
register/unregister notification helpers and use them.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230828061657.300667-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable IPsec packet offloads,
this is used to control the port IPsec capabilities.
When IPsec packet is disabled for a function of the port (default),
function cannot offload IPsec packet operations (encapsulation and XFRM
policy offload). When enabled, IPsec packet operations can be offloaded
by the function of the port, which includes crypto operation
(Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy
offload.
Example of a PCI VF port which supports IPsec packet offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited fixes commit introduced linecard notifications for register,
however it didn't add them for unregister. Fix that by adding them.
Fixes: c246f9b5fd ("devlink: add support to create line card and expose to user")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817125240.2144794-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow user to pass port index for health reporter dump request.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-14-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.
Re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definitions for the commands that do per-instance dump
and re-generate the related code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define port handling helpers what don't rely on internal_flags.
Have __devlink_nl_pre_doit() to accept the flags as a function arg and
make devlink_nl_pre_doit() a wrapper helper function calling it.
Introduce new helpers devlink_nl_pre_doit_port() and
devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up
patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to give the rate any special treatment in netlink attributes
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler
by moving the rate attributes parsing to rate_*_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No need to give the linecards any special treatment in netlink attribute
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler
by moving the linecard attribute parsing to linecard_[gs]et_doit() ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230811155714.1736405-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
