In order to understand where a broadcast packet is coming from and use
this information to detect not yet announced clients, this patch modifies the
interface_rx() function by passing a new argument: the orig node
corresponding to the node that originated the received packet (if known).
This new argument if not NULL for broadcast packets only (other packets does not
have source field).
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
With the current TT mechanism a new client joining the network is not
immediately able to communicate with other hosts because its MAC address has not
been announced yet. This situation holds until the first OGM containing its
joining event will be spread over the mesh network.
This behaviour can be acceptable in networks where the originator interval is a
small value (e.g. 1sec) but if that value is set to an higher time (e.g. 5secs)
the client could suffer from several malfunctions like DHCP client timeouts,
etc.
This patch adds an early detection mechanism that makes nodes in the network
able to recognise "not yet announced clients" by means of the broadcast packets
they emitted on connection (e.g. ARP or DHCP request). The added client will
then be confirmed upon receiving the OGM claiming it or purged if such OGM
is not received within a fixed amount of time.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
When enabling promiscuous mode, tt queries for other hosts might be
received. Before this patch, "foreign" tt queries were processed like
any other query and thus forwarded to its destination again and thereby
causing a loop.
This patch adds a check to drop foreign tt queries.
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
batadv_check_unicast_packet() is needed in batadv_recv_tt_query(), so
move the former to before the latter.
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
The structure batadv_priv grows everytime a new feature is introduced. It gets
hard to find the parts of the struct that belongs to a specific feature. This
becomes even harder by the fact that not every feature uses a prefix in the
member name.
The variables for bridge loop avoidence, gateway handling, translation table
and visualization server are moved into separate structs that are included in
the bat_priv main struct.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
If this call fails, some of the orig_nodes spaces may have been
resized for the increased number of interface, and some may not.
If we would just continue with the larger number of interfaces,
this would lead to access to not allocated memory later.
We better check the return code, and don't add the interface if
no memory is available. OTOH, keeping some of the orig_nodes
with too much memory allocated should hurt no one (except for
a few too many bytes allocated).
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
The batadv_tt_orig_list_entry structure didn't have any refcounting mechanism so
far. This patch introduces it and makes the structure being usable in much more
complex context.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
As much as I'm happy to see LWN links sprinkled through the kernel by the
dozen, this one in particular reflects a very old state of reality; the
associated comment is now incorrect. So just delete it.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
for consistency reasons within the code and with the documentation,
we should always call it "claim" and "unclaim".
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
This is especially useful if there are no claims yet, but we still want
to know which gateways are using bridge loop avoidance in the network.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Change since v1:
* Fixed inuse counters access spotted by Eric
In patch eea68e2f (packet: Report socket mclist info via diag module) I've
introduced a "scheduling in atomic" problem in packet diag module -- the
socket list is traversed under rcu_read_lock() while performed under it sk
mclist access requires rtnl lock (i.e. -- mutex) to be taken.
[152363.820563] BUG: scheduling while atomic: crtools/12517/0x10000002
[152363.820573] 4 locks held by crtools/12517:
[152363.820581] #0: (sock_diag_mutex){+.+.+.}, at: [<ffffffff81a2dcb5>] sock_diag_rcv+0x1f/0x3e
[152363.820613] #1: (sock_diag_table_mutex){+.+.+.}, at: [<ffffffff81a2de70>] sock_diag_rcv_msg+0xdb/0x11a
[152363.820644] #2: (nlk->cb_mutex){+.+.+.}, at: [<ffffffff81a67d01>] netlink_dump+0x23/0x1ab
[152363.820693] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff81b6a049>] packet_diag_dump+0x0/0x1af
Similar thing was then re-introduced by further packet diag patches (fanount
mutex and pgvec mutex for rings) :(
Apart from being terribly sorry for the above, I propose to change the packet
sk list protection from spinlock to mutex. This lock currently protects two
modifications:
* sklist
* prot inuse counters
The sklist modifications can be just reprotected with mutex since they already
occur in a sleeping context. The inuse counters modifications are trickier -- the
__this_cpu_-s are used inside, thus requiring the caller to handle the potential
issues with contexts himself. Since packet sockets' counters are modified in two
places only (packet_create and packet_release) we only need to protect the context
from being preempted. BH disabling is not required in this case.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The helper functions which translate IEEE MDIO Manageable Device (MMD)
Energy-Efficient Ethernet (EEE) registers 3.20, 7.60 and 7.61 to and from
the comparable ethtool supported/advertised settings will be needed by
drivers other than those in PHYLIB (e.g. e1000e in a follow-on patch).
In the same fashion as similar translation functions in linux/mii.h, move
these functions from the PHYLIB core to the linux/mdio.h header file so the
code will not have to be duplicated in each driver needing MMD-to-ethtool
(and vice-versa) translations. The function and some variable names have
been renamed to be more descriptive.
Not tested on the only hardware that currently calls the related functions,
stmmac, because I don't have access to any. Has been compile tested and
the translations have been tested on a locally modified version of e1000e.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using a hard-coded value for the status variable, it would make
the code more readable to use its destined define from linux/if_packet.h.
Signed-off-by: daniel.borkmann@tik.ee.ethz.ch
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we have already in BH context when *_write_space(),
*_data_ready() as well as *_state_change() are called, it's
unnecessary to disable BH.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the "bonding" driver does not support load balancing outgoing
traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4)
are currently supported; this patch adds transmit hashing for IPv6 (and
TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the
bonding driver. In addition, bounds checking has been added to all
transmit hashing functions.
The algorithm chosen (xor'ing the bottom three quads of the source and
destination addresses together, then xor'ing each byte of that result into
the bottom byte, finally xor'ing with the last bytes of the MAC addresses)
was selected after testing almost 400,000 unique IPv6 addresses harvested
from server logs. This algorithm had the most even distribution for both
big- and little-endian architectures while still using few instructions. Its
behavior also attempts to closely match that of the IPv4 algorithm.
The IPv6 flow label was intentionally not included in the hash as it appears
to be unset in the vast majority of IPv6 traffic sampled, and the current
algorithm not using the flow label already offers a very even distribution.
Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets,
ie, they are not balanced based on layer 4 information. Additionally,
IPv6 packets with intermediate headers are not balanced based on layer
4 information. In practice these intermediate headers are not common and
this should not cause any problems, and the alternative (a packet-parsing
loop and look-up table) seemed slow and complicated for little gain.
Tested-by: John Eaglesham <linux@8192.net>
Signed-off-by: John Eaglesham <linux@8192.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6gre_err() miscomputes grehlen (sizeof(ipv6h) is 4 or 8,
not 40 as expected), and should take into account 'offset' parameter.
Also uses pskb_may_pull() to cope with some fragged skbs
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reverts commit 56892261ed (xfrm: Use rcu_dereference_bh to
deference pointer protected by rcu_read_lock_bh), and fixes bugs
introduced in commit 418a99ac6a ( Replace rwlock on xfrm_policy_afinfo
with rcu )
1) We properly use RCU variant in this file, not a mix of RCU/RCU_BH
2) We must defer some writes after the synchronize_rcu() call or a reader
can crash dereferencing NULL pointer.
3) Now we use the xfrm_policy_afinfo_lock spinlock only from process
context, we no longer need to block BH in xfrm_policy_register_afinfo()
and xfrm_policy_unregister_afinfo()
4) Can use RCU_INIT_POINTER() instead of rcu_assign_pointer() in
xfrm_policy_unregister_afinfo()
5) Remove a forward inline declaration (xfrm_policy_put_afinfo()),
and also move xfrm_policy_get_afinfo() declaration.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Fan Du <fan.du@windriver.com>
Cc: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed extra one second delay in device dismantle, tracked down to
a call to dst_dev_event() while some call_rcu() are still in RCU queues.
These call_rcu() were posted by rt_free(struct rtable *rt) calls.
We then wait a little (but one second) in netdev_wait_allrefs() before
kicking again NETDEV_UNREGISTER.
As the call_rcu() are now completed, dst_dev_event() can do the needed
device swap on busy dst.
To solve this problem, add a new NETDEV_UNREGISTER_FINAL, called
after a rcu_barrier(), but outside of RTNL lock.
Use NETDEV_UNREGISTER_FINAL with care !
Change dst_dev_event() handler to react to NETDEV_UNREGISTER_FINAL
Also remove NETDEV_UNREGISTER_BATCH, as its not used anymore after
IP cache removal.
With help from Gao feng
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the name of the macro used to mask the
mmc interrupt: erroneously it was used: MMC_DEFAUL_MASK.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Erroneously the DWMAC_CORE_3_40 was set to 34 instead of 0x34.
This can generate problems when run on old chips because
the driver assumes that there are the extra 16 regs available
for perfect filtering.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Gianni Antoniazzi <gianni.antoniazzi-ext@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sylvain Munault reported following info :
- TCP connection get "stuck" with data in send queue when doing
"large" transfers ( like typing 'ps ax' on a ssh connection )
- Only happens on path where the PMTU is lower than the MTU of
the interface
- Is not present right after boot, it only appears 10-20min after
boot or so. (and that's inside the _same_ TCP connection, it works
fine at first and then in the same ssh session, it'll get stuck)
- Definitely seems related to fragments somehow since I see a router
sending ICMP message saying fragmentation is needed.
- Exact same setup works fine with kernel 3.5.1
Problem happens when the 10 minutes (ip_rt_mtu_expires) expiration
period is over.
ip_rt_update_pmtu() calls dst_set_expires() to rearm a new expiration,
but dst_set_expires() does nothing because dst.expires is already set.
It seems we want to set the expires field to a new value, regardless
of prior one.
With help from Julian Anastasov.
Reported-by: Sylvain Munaut <s.munaut@whatever-company.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Julian Anastasov <ja@ssi.bg>
Tested-by: Sylvain Munaut <s.munaut@whatever-company.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
This is the first batch of Netfilter and IPVS updates for your
net-next tree. Mostly cleanups for the Netfilter side. They are:
* Remove unnecessary RTNL locking now that we have support
for namespace in nf_conntrack, from Patrick McHardy.
* Cleanup to eliminate unnecessary goto in the initialization
path of several Netfilter tables, from Jean Sacren.
* Another cleanup from Wu Fengguang, this time to PTR_RET instead
of if IS_ERR then return PTR_ERR.
* Use list_for_each_entry_continue_rcu in nf_iterate, from
Michael Wang.
* Add pmtu_disc sysctl option to disable PMTU in their tunneling
transmitter, from Julian Anastasov.
* Generalize application protocol registration in IPVS and modify
IPVS FTP helper to use it, from Julian Anastasov.
* update Kconfig. The IPVS FTP helper depends on the Netfilter FTP
helper for NAT support, from Julian Anastasov.
* Add logic to update PMTU for IPIP packets in IPVS, again
from Julian Anastasov.
* A couple of sparse warning fixes for IPVS and Netfilter from
Claudiu Ghioc and Patrick McHardy respectively.
Patrick's IPv6 NAT changes will follow after this batch, I need
to flush this batch first before refreshing my tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
This series contains updates to ethtool.h, e1000, e1000e, and igb to
implement MDI/MDIx control.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change marks interface as down on reset, otherwise the driver can't
reinitialize itself properly.
Without the change a transient problem turns out to be critical and leads
to inavailability to reset the driver without brcmsmac module unload/load
cycle:
ieee80211 phy0: wl0: PSM microcode watchdog fired at 5993 (seconds). Resetting.
brcms_c_dpc : PSM Watchdog, chipid 0xa8d9, chiprev 0x1
ieee80211 phy0: wl0: fatal error, reinitializing
ieee80211 phy0: Hardware restart was requested
ieee80211 phy0: brcms_ops_start: brcms_up() returned -19
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pull drm fixes from Dave Airlie:
"Intel: edid fixes, power consumption fix, s/r fix, haswell fix
Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better
MSAA validation, lockup timeout fixes, modesetting fixes
One udl dpms fix, one vmwgfx fix, a couple of trivial core changes.
There is an export added to ACPI as part of the radeon bios fixes.
I've also included the fbcon flashing cursor vs deinit race fix, that
seems the simplest place to start"
Trivial conflict in drivers/video/console/fbcon.c due to me having
already applied the fbcon flashing cursor vs deinit race fix, and Dave
had added a comment in there too.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
fbcon: fix race condition between console lock and cursor timer (v1.1)
drm: Add missing static storage class specifiers in drm_proc.c file
drm/udl: dpms off the crtc when disabled.
drm: Remove two unused fields from struct drm_display_mode
drm: stop vmgfx driver explosion
drm/radeon/ss: use num_crtc rather than hardcoded 6
Revert "drm/radeon: fix bo creation retry path"
drm/i915: use hsw rps tuning values everywhere on gen6+
drm/radeon: split ATRM support out from the ATPX handler (v3)
drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
ACPI: export symbol acpi_get_table_with_size
drm/radeon: implement ACPI VFCT vbios fetch (v3)
drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping
drm/radeon: fix checking of MSAA renderbuffers on r600-r700
drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
drm/radeon: init lockup timeout on ring init
drm/radeon: avoid turning off spread spectrum for used pll
drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
drm/i915: extract connector update from intel_ddc_get_modes() for reuse
drm/i915: fix hsw uncached pte
...
Pull SCSI target fixes from Nicholas Bellinger:
"The executive summary includes:
- Post-merge review comments for tcm_vhost (MST + nab)
- Avoid debugging overhead when not debugging for tcm-fc(FCoE) (MDR)
- Fix NULL pointer dereference bug on alloc_page failulre (Yi Zou)
- Fix REPORT_LUNs regression bug with pSCSI export (AlexE + nab)
- Fix regression bug with handling of zero-length data CDBs (nab)
- Fix vhost_scsi_target structure alignment (MST)
Thanks again to everyone who contributed a bugfix patch, gave review
feedback on tcm_vhost code, and/or reported a bug during their own
testing over the last weeks.
There is one other outstanding bug reported by Roland recently related
to SCSI transfer length overflow handling, for which the current
proposed bugfix has been left in queue pending further testing with
other non iscsi-target based fabric drivers.
As the patch is verified with loopback (local SGL memory from SCSI
LLD) + tcm_qla2xxx (TCM allocated SGL memory mapped to PCI HW) fabric
ports, it will be included into the next 3.6-rc-fixes PULL request."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Remove unused se_cmd.cmd_spdtl
tcm_fc: rcu_deref outside rcu lock/unlock section
tcm_vhost: Fix vhost_scsi_target structure alignment
target: Fix regression bug with handling of zero-length data CDBs
target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough
tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char *
target: fix NULL pointer dereference bug alloc_page() fails to get memory
tcm_fc: Avoid debug overhead when not debugging
tcm_vhost: Post-merge review changes requested by MST
tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl
Pull i2c-embedded fixes from Wolfram Sang:
"Some bugfixes for the "embedded" part of the I2C subsystem. The fixes
affect mostly drivers which have been largely reworked lately and
where regressions appeared."
* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP
i2c: diolan-u2c: Fix master_xfer return code
I2C: OMAP: xfer: fix runtime PM get/put balance on error
i2c: nomadik: Add default configuration into the Nomadik I2C driver
These patches fix the Samsung PWM driver and perform some minor cleanups
like fixing checkpatch and sparse warnings. Two redundant error messages
are removed and the Kconfig help text for the PWM subsystem is made more
descriptive.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=oTl5
-----END PGP SIGNATURE-----
Merge tag 'for-3.6-rc3' of git://gitorious.org/linux-pwm/linux-pwm
Pull pwm fixes from Thierry Reding:
"These patches fix the Samsung PWM driver and perform some minor
cleanups like fixing checkpatch and sparse warnings.
Two redundant error messages are removed and the Kconfig help text for
the PWM subsystem is made more descriptive."
* tag 'for-3.6-rc3' of git://gitorious.org/linux-pwm/linux-pwm:
pwm: Improve Kconfig help text
pwm: core: Fix coding style issues
pwm: vt8500: Fix coding style issue
pwm: Remove a redundant error message when devm_request_and_ioremap fails
pwm: samsung: add missing device pointer to struct pwm_chip
pwm: Add missing static storage class specifiers in core.c file
Usually it's a good practice to use goto statement for error recovery
when initializing the module. This approach could be an overkill if:
1) there is only one fail case;
2) success and failure use the same return statement.
For a cleaner approach, remove the unnecessary goto statement and
directly implement error recovery.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch replaces list_for_each_continue_rcu() with
list_for_each_entry_continue_rcu() to allow removing
list_for_each_continue_rcu().
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull ceph fixes from Sage Weil:
"Jim's fix closes a narrow race introduced with the msgr changes. One
fix resolves problems with debugfs initialization that Yan found when
multiple client instances are created (e.g., two clusters mounted, or
rbd + cephfs), another one fixes problems with mounting a nonexistent
server subdirectory, and the last one fixes a divide by zero error
from unsanitized ioctl input that Dan Carpenter found."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid divide by zero in __validate_layout()
libceph: avoid truncation due to racing banners
ceph: tolerate (and warn on) extraneous dentry from mds
libceph: delay debugfs initialization until we learn global_id
- NFSv3 mounts need to fail if the FSINFO rpc call fails
- Ensure that the NFS commit cache gets torn down when we unload the
NFS module.
- Fix memory scribble issues when interrupting a LAYOUTGET rpc call
- Fix NFSv4 legacy idmapper regressions
- Fix issues with the NFSv4 getacl command
- Fix a regression when using the legacy "mount -t nfs4"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJQNPyKAAoJEGcL54qWCgDyQlAP/AmnLaJmKMPj5P4GCiA/uxMV
sr0XSSVAv+OgUtRxLNO5PDyunVIIEjwA5nGa2RZEG14+eYwNEeQehaGoaGqoKLhh
ATOCMvHHEs5qSKLckWsZWflf6U/MLimYS3D/hHVUtP0QWbBMtol3ImABs2ht/VUc
HW0wQoEG+5mhbhC87d4ku5E+OHQzYeNNmdX2VkKOmT0CwRd/bfsHxlGwMmcHldP2
TSge+MRhoKNycpy0j7nugHj2pZ12UiX+O8371OlAketnPk0OA+6RNGMyNo49IQAn
VEN9MFWc4ypH1+hJ0OvhzmUA6Zn2/lyQXUtwM1DcXeBmLI4aClb3bT3G3xKNh09O
yLEvkh2aUUlmoTSgP7vDK/Ui3QwVnsaJULvg+gywQJG6qTSFgUQfErNKgJmabHQb
d0EuumlSGnJ7qdC5nmrUp+M/CpbfGh15ax/JnTRGVK7C3jeCm18vc2np+z4EUDp/
USzrvuBu1B8eI0nQNoht0BeNf7sEJGgFIn8BJzxDakP8buXPMqEvFwA8c1JmMeBX
E6pbG2jHqPdrTJtxQTpMRqhA0MxbFlVNi5cCs6U7ifiBqbRWEXyNVgAHTwoIxIrn
ASbL0s8gZH+EMEXNOmPmFiO2NUjBCeSzAjrsTmSpWa13YmGfiroZN8N/iPzLnFf+
FR3SFUnoJHq7x4uLZoAX
=lqfh
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.6-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- NFSv3 mounts need to fail if the FSINFO rpc call fails
- Ensure that the NFS commit cache gets torn down when we unload the
NFS module.
- Fix memory scribble issues when interrupting a LAYOUTGET rpc call
- Fix NFSv4 legacy idmapper regressions
- Fix issues with the NFSv4 getacl command
- Fix a regression when using the legacy "mount -t nfs4"
* tag 'nfs-for-3.6-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv3: Ensure that do_proc_get_root() reports errors correctly
NFSv4: Ensure that nfs4_alloc_client cleans up on error.
NFS: return -ENOKEY when the upcall fails to map the name
NFS: Clear key construction data if the idmap upcall fails
NFSv4: Don't use private xdr_stream fields in decode_getacl
NFSv4: Fix the acl cache size calculation
NFSv4: Fix pointer arithmetic in decode_getacl
NFS: Alias the nfs module to nfs4
NFS: Fix a regression when loading the NFS v4 module
NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done
pnfs-obj: Better IO pattern in case of unaligned offset
NFS41: add pg_layout_private to nfs_pageio_descriptor
pnfs: nfs4_proc_layoutget returns void
pnfs: defer release of pages in layoutget
nfs: tear down caches in nfs_init_writepagecache when allocation fails
Pull assorted fixes - mostly vfs - from Al Viro:
"Assorted fixes, with an unexpected detour into vfio refcounting logics
(fell out when digging in an analog of eventpoll race in there)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
task_work: add a scheduling point in task_work_run()
fs: fix fs/namei.c kernel-doc warnings
eventpoll: use-after-possible-free in epoll_create1()
vfio: grab vfio_device reference *before* exposing the sucker via fd_install()
vfio: get rid of vfio_device_put()/vfio_group_get_device* races
vfio: get rid of open-coding kref_put_mutex
introduce kref_put_mutex()
vfio: don't dereference after kfree...
mqueue: lift mnt_want_write() outside ->i_mutex, clean up a bit
It seems commit 4a9d4b02 (switch fput to task_work_add) reintroduced
the problem addressed in commit 944be0b2 (close_files(): add scheduling
point)
If a server process with a lot of files (say 2 million tcp sockets)
is killed, we can spend a lot of time in task_work_run() and trigger
a soft lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix kernel-doc warnings in fs/namei.c:
Warning(fs/namei.c:360): No description found for parameter 'inode'
Warning(fs/namei.c:672): No description found for parameter 'nd'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As soon as we'd installed the file into descriptor table, it can
get closed by another thread. Freeing ep in process...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's not critical (anymore) since another thread closing the file will block
on ->device_lock before it gets to dropping the final reference, but it's
definitely cleaner that way...
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
we really need to make sure that dropping the last reference happens
under the group->device_lock; otherwise a loop (under device_lock)
might find vfio_device instance that is being freed right now, has
already dropped the last reference and waits on device_lock to exclude
the sucker from the list.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>