The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----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=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
Since commit 7c41cdcd3b ("OPP: Simplify the over-designed pstate <->
level dance"), there is no longer any need for genpd providers to assign
the ->opp_to_performance_state(), hence let's drop it.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
./drivers/soc/tegra/cbb/tegra-cbb.c:130:3-10: line 130 is redundant because platform_get_irq() already prints an error.
./drivers/soc/tegra/cbb/tegra-cbb.c:140:2-9: line 140 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4879
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To simplify with maintenance let's move the powergate-bpmp driver to the
new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Note that, we leave the pmc driver in the soc directory for now, as it
looks like it may need some re-structuring before it's ready to be moved.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
No core changes this time.
New drivers:
- Tegra234 support.
- Qualcomm IPQ5018 support.
- Intel Meteor Lake-S support.
- Qualcomm SDX75 subdriver.
- Qualcomm SPMI-based PM8953 support.
Improvements:
- Fix up support for GPIO3 on the AXP209.
- Push-pull drive configuration support for the AT91 PIO4.
- Fix misc non-urgent bugs in the AMD driver.
- Misc non-urgent improved error handling.
- Misc janitorial and minor improvements.
-----BEGIN PGP SIGNATURE-----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=MMUo
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
Move to the device-managed version of clk_notifier_register() to remove
the need for manual cleanup. This fixes a potential issue where the
clock notifier would stick around after the driver fails to probe at a
later point.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
debugfs calls should generally not be error-checked to simplify the case
where debugfs is disabled. Since this driver is built-in and has the
sysfs bind/unbind attributes disabled, it cannot be unloaded, so there
is no need to hold onto a reference to the debugfs files that are
created.
We can further simplify this by moving the debugfs file creation to a
later stage to avoid any cleanup we might have to do during error unwind
operations. This is also a little cleaner because the debugfs file
relies on data structures that are created at a later point than when
the file was previously created.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This change adds support for the two pin controllers found on Tegra234.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Tegra234 fuse size is incorrectly defined as 0x98c. The actual size
of the Tegra234 fuses is 0xf8c and so update the size of the Tegra234
fuses to fix this.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Wake-up signal 83 on Tegra234 is triggered by software writing to
WAKE_AOWAKE_SW_WAKE_TIER0_TRIGGER_0 register. This wake-up is mapped
to CPU interrupt 179 and is used by the Sensor Processing Engine (SPE)
in the Always-on (AON) power domain for waking up the system.
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for Tegra264 to the fuse handling code.
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After commit 16988c7429 ("of/address: introduce of_address_count() helper"),
We can use of_address_count() to instead of open-coding it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Sensor Processing Engine(SPE) can trigger a software wake-up of
the device. To support this wake-up for the SPE, set SR_CAPTURE_EN
bit in WAKE_AOWAKE_CNTRL register associated with the wake-up for
the SPE. This SR capturing logic is expected to be enabled for wakes
with short pulse signalling requirements.
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the GPIO wake interrupt for MGBE ethernet controller on Tegra234 SoC.
Signed-off-by: Sushil Singh <sushilkumars@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the PMIC wake event for Tegra234 that is used to bring the device
out of system suspend for events such as an RTC alarm.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Within the error path, genpd->domains has not been set, so we need
to pass the domains variable to kfree instead.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
make versioncheck reports the following:
./drivers/soc/tegra/cbb/tegra-cbb.c: 19 linux/version.h not needed.
./drivers/soc/tegra/cbb/tegra194-cbb.c: 26 linux/version.h not needed.
./drivers/soc/tegra/cbb/tegra234-cbb.c: 27 linux/version.h not needed.
So remove linux/version.h from these files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These are a couple of build fixes from randconfig testing,
plus a set of Mediatek SoC specific fixes, all trivial.
-----BEGIN PGP SIGNATURE-----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=qUCm
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of build fixes from randconfig testing, plus a set
of Mediatek SoC specific fixes, all trivial"
* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: tegra: fix CPU_BIG_ENDIAN dependencies
ARM: disallow pre-ARMv5 builds with ld.lld
ARM: pxa: fix building with clang
MAINTAINERS: add related dts to IXP4xx
ARM: dts: spear: drop 0x from unit address
arm64: dts: mt8183: Fix Mali GPU clock
arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
soc: mediatek: pm-domains: Fix the power glitch issue
My previous patch to prevent BPMP from being enabled on big
endian kernels caused a build regression:
WARNING: unmet direct dependencies detected for TEGRA_BPMP
Depends on [n]: ARCH_TEGRA [=y] && TEGRA_HSP_MBOX [=y] && TEGRA_IVC [=y] && !CPU_BIG_ENDIAN [=y]
Selected by [y]:
- ARCH_TEGRA_186_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_194_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
- ARCH_TEGRA_234_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
Add even more such dependencies for the SoC types that use
the BPMP driver.
Fixes: 4ddb1bf1a8 ("tegra: mark BPMP driver as little-endian only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221215165336.1781080-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To enable error reporting for a fabric to CCPLEX, we need to write its
register for enabling error interrupt to CCPLEX during boot and later
clear the error status register after error occurs. If a fabric's
registers are protected and not accessible from CCPLEX, then accessing
the registers will cause CBB firewall error.
Add support to check whether write access from CCPLEX to the registers
of a fabric is not blocked by it's firewall before enabling error
reporting to CCPLEX for that fabric.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Added checks to avoid potential out of bounds errors which can happen if
the 'slave map' and 'CBB errors' arrays are not correct or latest where
some entries are missing.
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Updating the slave map for fabrics and using the same maps for DCE, RCE
and SCE as they all are a replica in Tegra234.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In Tegra194 SoC, master_id bit range is different between cluster NOC
and CBB NOC. Currently same bit range is used which results in wrong
master_id value. Due to this, illegal accesses from the CCPLEX master
do not result in a crash as expected. Fix this by using the correct
range for the CBB NOC.
Finally, it is only necessary to extract the master_id when the
erd_mask_inband_err flag is set because when this is not set, a crash
is always triggered.
Fixes: b713442214 ("soc/tegra: cbb: Add CBB 1.0 driver for Tegra194")
Fixes: fc2f151d23 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra pre-silicon platforms do not have chip revisions. This makes the
revision SoC attribute meaningless on these platforms.
Instead, populate the revision SoC attribute with a combination of the
platform name and the chip revision for silicon platforms, and simply
with the platform name on pre-silicon platforms.
Signed-off-by: Kartik <kkartik@nvidia.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During system resume, translate tier2 SC7 wake sources back into IRQs
and do generic_handle_irq() to invoke the interrupt handlers for edge
triggered wake events such as SW-wake.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When a wake event is defined to be triggered on both positive and
negative edge of the input wake signal, it is crucial to know the
current state of the signal when going into suspend. The intended way to
obtain the current state of the wake signals is to read the
WAKE_AOWAKE_SW_STATUS register, which should contains the raw state of
the wake signals.
However, this register is edge triggered, an edge will not be generated
for signals that are already asserted prior to the assertion of
WAKE_LATCH_SW.
To workaround this, change the polarity of the wake level from '0' to
'1' while latching the signals, as this will generate an edge for
signals that are set to '1'.
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add I/O pad table for Tegra234 to allow configuring DPD mode and
switching the pins to 1.8V or 3.3V as needed.
On Tegra234, DPD registers are reorganized such that there is a DPD_REQ
register and a DPD_STATUS register per pad group. Update the PMC driver
accordingly.
While at it, use the generated tables from tegra-pinmux-scripts to make
the formatting of these tables more consistent.
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
[treding@nvidia.com: generate tables from tegra-pinmux-scripts]
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, various FUSE offsets are restricted and cannot be
accessed from CCPLEX. Currently nvmem binary interface allows reading
such offsets from userspace, which results in RAS errors.
Add nvmem keepout lists to avoid any reads to restricted offsets.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra FUSE block size, availability and offsets can vary from one SoC
generation to another.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This introduces the CBB driver that is used to provide (a lot of)
information about SErrors when things go wrong, instead of the kernel
just crashing or hanging.
-----BEGIN PGP SIGNATURE-----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=2g7+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LUSQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-cbb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: cbb: Changes for v6.1-rc1
This introduces the CBB driver that is used to provide (a lot of)
information about SErrors when things go wrong, instead of the kernel
just crashing or hanging.
* tag 'tegra-for-6.1-cbb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: cbb: Add support for Tegra241 (Grace)
soc/tegra: cbb: Add driver for Tegra234 CBB 2.0
soc/tegra: cbb: Add CBB 1.0 driver for Tegra194
soc/tegra: Set ERD bit to mask inband errors
Link: https://lore.kernel.org/r/20220916101957.1635854-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In early_initcall, check if PMC device is available for use
and avoid accessing PMC resources if the device node status
property is set to disabled.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use devm_clk_get_optional() instead of hand writing it.
While at it, use dev_err_probe() to further simplify the code. This is also
less verbose if clk_get() returns -EPROBE_DEFER.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DMA subsystem could be entirely disabled in Kconfig and then the
TEGRA20_APB_DMA option isn't available too. Hence kernel configuration
fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable
dependency.
The FUSE driver isn't a critical driver and currently it only provides
NVMEM interface to userspace which isn't known to be widely used, and
thus, it's fine if FUSE driver fails to load.
Let's remove the erroneous Kconfig dependency and let the FUSE driver to
fail the probing if DMA is unavailable.
Fixes: 19d41e5e9c ("soc/tegra: fuse: Add APB DMA dependency for Tegra20")
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209301
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Adding support for Tegra241 (Grace) which uses fabrics based on the CBB
2.0 architecture. Since Tegra241 requires ACPI, implement ACPI-based
probe support.
Fabrics reporting errors in Tegra241 are "CBB" and "BPMP". The CBB
fabric connects various other CBB 2.0 based fabrics and also services
the Initiators and Targets which are connected to itself. The BPMP
fabric is present in the BPMP cluster.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adding driver to handle errors from CBB version 2.0 which is used in
Tegra234 SoC. The driver prints debug information about failed
transaction on receiving interrupt from the error notifier. The error
notifier collates the interrupts from various error monitor blocks and
presents a single interrupt to the SoC interrupt controller.
For timeout errors, the driver also does the lookup to find timed out
clients and prints their client ID. Drivers for hardware that needs to
be reset on timeout will have to call BPMP from the client IP's driver.
BPMP firmware will also clear the timeout bit after resetting the IP
so that next transactions are send to them after reset.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adding driver to handle errors from Control Backbone (CBB) which are
generated due to illegal accesses. CBB 1.0 is used in Tegra194 SoCs.
When an error is reported from a NOC within CBB, the driver prints debug
information about failed transaction like Error Code, Error Description,
Master, Address, AXI ID, Cache, Protection, Security Group etc. It then
causes system crash using BUG_ON() or call WARN() based on whether the
error type is fatal or not.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 supports waking up from suspend when activity is detected on
any of the USB ports. Add these wake events so that the system can be
woken on such activity.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Linus Torvalds