Commit graph

83 commits

Author SHA1 Message Date
Atsushi Nemoto
1723b4a34a [MIPS] Make timer interrupt frequency configurable from kconfig.
Make HZ configurable.  DECSTATION can select 128/256/1024 HZ, JAZZ can
only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if
not explicitly specified).  Also remove all mach-xxx/param.h files and
update all defconfigs according to current HZ value.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:27 +01:00
Ralf Baechle
35189fad3c [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:26 +01:00
dmitry pervushin
355c471f2f [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
Signed-off-by: dmitry pervushin  <dpervushin@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:26 +01:00
Thomas Bogendoerfer
4a0312fca6 [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)
    
Signed-off-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:24 +01:00
Ralf Baechle
470b160364 [MIPS] Remove support for NEC DDB5476.
As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:24 +01:00
Ralf Baechle
eaff388874 [MIPS] Remove support for NEC DDB5074.
As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:24 +01:00
Rodolfo Giometti
952fa954a6 [MIPS] APM emu support
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:22 +01:00
Ralf Baechle
d8cb4e119f [MIPS] Cleanup ARCH_DISCONTIGMEM_ENABLE and NUMA configuration.
IP27 configuration isn't the only NUMA system - it just happens to be
the currently only supported MIPS NUMA system.  So move the necessary
options back into the main MIPS Kconfig file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:21 +01:00
Mark.Zhan
a240a46964 [MIPS] Wind River 4KC PPMC Eval Board Support
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board.

Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:18 +01:00
Ralf Baechle
4b29f6043d [MIPS] Mark PNX8550 support broken.
Broken in too many way for me to fix it for 2.6.17.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:16 +01:00
Ralf Baechle
aac076f880 [MIPS] IP22: Fix ISA driver builds if CONFIG_EISA is selected.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:15 +01:00
Ralf Baechle
714bfad60f [MIPS] Remove EXPERIMENTAL from PAGE_SIZE_16KB
This is known to be working fine for a while.  While at it also update
and fix the help texts.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-01 00:28:34 +01:00
Martin Michlmayr
3fa986faad [MIPS] Create consistency in "system type" selection.
The "system type" Kconfig options on MIPS are not consistent.  For
some platforms, only the name is listed while other entries are
prepended with "Support for".  Remove this as it doesn't make sense
when describing the "system type".
    
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-01 00:28:33 +01:00
Ralf Baechle
f7062ddb23 [MIPS] Get rid of CONFIG_ADVANCED.
It's been a horrible source of confusion and let users to shoot themselves
into both feet with uzis to no end.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-27 15:13:50 +01:00
Ralf Baechle
f088fc84f9 [MIPS] FPU affinity for MT ASE.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:28 +02:00
Ralf Baechle
41c594ab65 [MIPS] MT: Improved multithreading support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:28 +02:00
Ralf Baechle
2600990e64 [MIPS] kpsd and other AP/SP improvements.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:27 +02:00
Atsushi Nemoto
1cc89038f3 [MIPS] Enable SCHED_NO_NO_OMIT_FRAME_POINTER for MIPS.
MIPS get_wchan() no longer requires -fno-omit-frame-pointer.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:21 +02:00
Yasunori Goto
c80d79d746 [PATCH] Configurable NODES_SHIFT
Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for
each arch.  Its definition is sometimes configurable.  Indeed, ia64 defines 5
NODES_SHIFT values in the current git tree.  But it looks a bit messy.

SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has
been changeable by config.  Suitable node's number may be changed in the
future even if it is other architecture.  So, I wrote configurable node's
number.

This patch set defines just default value for each arch which needs multi
nodes except ia64.  But, it is easy to change to configurable if necessary.

On ia64 the number of nodes can be already configured in generic ia64 and SN2
config.  But, NODES_SHIFT is defined for DIG64 and HP'S machine too.  So, I
changed it so that all platforms can be configured via CONFIG_NODES_SHIFT.  It
would be simpler.

See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:39 -07:00
Dmitry Torokhov
95d465fd75 Manual merge with Linus.
Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c
2006-04-02 00:08:05 -05:00
Akinobu Mita
3c9ee7ef87 [PATCH] bitops: mips: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit()

- unless defined(CONFIG_CPU_MIPS32) or defined(CONFIG_CPU_MIPS64)

  - remove __ffs()
  - remove ffs()
  - remove ffz()
  - remove fls()

- remove fls64()
- remove find_{next,first}{,_zero}_bit()
- remove sched_find_first_bit()
- remove generic_hweight64()
- remove generic_hweight{32,16,8}()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove ext2_{set,clear}_bit_atomic()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:13 -08:00
Atsushi Nemoto
de862b488e [MIPS] TX49XX has prefetch.
The TX49XX has the prefetch instruction.  It supports only Pref_Load
(hint 0).  Actually changes in this patch except for Kconfig are not
have any effects, I added these changes to prevent misuse of unsupported
hints.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:47 +00:00
Martin Michlmayr
a206f6a7aa [MIPS] Mention Broadcom part number for BigSur board
Mention the Broadcom part number for the BigSur board (BCM91480B)
in Kconfig, just like it's done for other Broadcom boards.
    
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:47 +00:00
Ralf Baechle
c1449c8fa4 [MIPS] Symmetric Uniprocessor support for Qemu.
SMP bits needed to builds and run an SMP kernel.  While only a single
processor is supported ATM it's still useful for some SMP debugging using
Qemu.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:45 +00:00
Peter Horton
e87dddeb92 [MIPS] Add early console for Cobalt.
Signed-off-by: Peter Horton <pdh@colonel-panic.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:44 +00:00
Michael Neuling
e5c6c8e457 Input: pcspkr - separate device and driver registration
The current pcspkr code combines the device and driver registration.
This patch splits these, putting the device registration in the arch
specific code.

PowerPC and MIPS only have the pcspkr present sometimes.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:11:50 -05:00
Ralf Baechle
ec28f30657 [MIPS] Enable highmem for all MIPS32 and MIPS64 processors.
In case a particular system doesn't support highmem the runtime checks
will ensure nothing bad is going to happen.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-09 18:05:08 +00:00
Ralf Baechle
dd2f18fe5a [MIPS] Nevada support for SGI O2.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:22 +00:00
Ralf Baechle
948928add5 MIPS: R2: Set 64BIT_PHYS_ADDR for R2 processor also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10 13:39:08 +00:00
Ralf Baechle
830e9c002a MIPS: Remove unused CONFIG_CPU_HAS_LLDSCD.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10 13:39:07 +00:00
Ralf Baechle
b6c3539bdd [MIPS] Kconfig: Include init/Kconfig after we've set 32BIT / 64BIT.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-12-01 11:05:14 +00:00
Ralf Baechle
b8c2a77ce3 PNX8550 uses a MIPS32-like processor core, not R4xx0.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-07 18:05:36 +00:00
Ralf Baechle
7cf8053b8e More foolproofing of the CPU configuration.
Limit the number of cpu type options in the cpu menu to just those
types that are actually available for the select platform.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:49 +01:00
Andrew Isaacson
8a1417de9e BCM1480 HT support
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:49 +01:00
Andrew Isaacson
9a6dcea103 Support for BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Andrew Isaacson
f137e463b5 Add support for BCM1480 family of chips.
- Kconfig and Makefile changes
 - arch/mips/sibyte/bcm1480/
 - changes to sibyte common code to support 1480
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Ralf Baechle
5e83d43054 Sliceup Kconfig; it's grown too large.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:41 +01:00
Ralf Baechle
f92c1759a4 Document the meaning of the CPU_MIPS32, CPU_MIPS64, CPU_MIPSR1 and
CPU_MIPSR2.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:37 +01:00
Ralf Baechle
c78cbf49c4 Support for MIPSsim, the cycle accurate MIPS simulator.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:30 +01:00
Ralf Baechle
61ed242d7e Use ARCH_MAY_HAVE_PC_FDC where needed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:22 +01:00
Pete Popov
26a940e217 Cleaned up AMD Au1200 IDE driver:
- converted to platform bus
- removed pci dependencies
- removed virt_to_phys/phys_to_virt calls
    
System now can root off of a disk.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
new file mode 100644
2005-10-29 19:32:20 +01:00
Ralf Baechle
340ee4b98c Virtual SMP support for the 34K.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:10 +01:00
Ralf Baechle
797798c1be A little more Kconfig untangeling.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:01 +01:00
Ralf Baechle
0ae1279758 Send CONFIG_VTAG_ICACHE back into it's cold grave.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:59 +01:00
Ralf Baechle
c8094b53c1 Get rid of the nonsense in the CONFIG_CPU_HAS_PREFETCH block.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:59 +01:00
Ralf Baechle
23fbee9dd5 Support for Toshiba's RBHMA4500 eval board for the TX4938.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:57 +01:00
Ralf Baechle
7ab1261f5f Drop IP27 support for Qlogic ISP. This driver is buggy and has been
obsoleted by the qla1280 after the recent fixes.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:56 +01:00
Pete Popov
bdf21b18b4 Philips PNX8550 support: MIPS32-like core with 2 Trimedias on it.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:54 +01:00
Ralf Baechle
e01402b115 More AP / SP bits for the 34K, the Malta bits and things. Still wants
a little polishing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:53 +01:00
Ralf Baechle
1e5f1caa5d MIPS 32/64 R2 config option.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:44 +01:00