Commit Graph

44 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab 33ad41263d i7300_edac: Fix memory detection in single mode
When the machine is on single mode, only branch 0 channel 0
is valid. However, the code is not honouring it:

[ 1952.639341] EDAC DEBUG: i7300_get_mc_regs: Memory controller operating on single mode
...
[ 1952.639351] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH0 = 0x1:
[ 1952.639353] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH1 = 0x0:
[ 1952.639355] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH2 = 0x0:
[ 1952.639358] EDAC DEBUG: i7300_init_csrows: 		AMB-present CH3 = 0x0:
...
[ 1952.639360] EDAC DEBUG: decode_mtr: 	MTR0 CH0: DIMMs are Present (mtr)
[ 1952.639362] EDAC DEBUG: decode_mtr: 		WIDTH: x8
[ 1952.639363] EDAC DEBUG: decode_mtr: 		ELECTRICAL THROTTLING is enabled
[ 1952.639364] EDAC DEBUG: decode_mtr: 		NUMBANK: 4 bank(s)
[ 1952.639366] EDAC DEBUG: decode_mtr: 		NUMRANK: single
[ 1952.639367] EDAC DEBUG: decode_mtr: 		NUMROW: 16,384 - 14 rows
[ 1952.639368] EDAC DEBUG: decode_mtr: 		NUMCOL: 1,024 - 10 columns
[ 1952.639370] EDAC DEBUG: decode_mtr: 		SIZE: 512 MB
[ 1952.639371] EDAC DEBUG: decode_mtr: 		ECC code is 8-byte-over-32-byte SECDED+ code
[ 1952.639373] EDAC DEBUG: decode_mtr: 		Scrub algorithm for x8 is on enhanced mode
[ 1952.639374] EDAC DEBUG: decode_mtr: 	MTR0 CH1: DIMMs are Present (mtr)
[ 1952.639376] EDAC DEBUG: decode_mtr: 		WIDTH: x8
[ 1952.639377] EDAC DEBUG: decode_mtr: 		ELECTRICAL THROTTLING is enabled
[ 1952.639379] EDAC DEBUG: decode_mtr: 		NUMBANK: 4 bank(s)
[ 1952.639380] EDAC DEBUG: decode_mtr: 		NUMRANK: single
[ 1952.639381] EDAC DEBUG: decode_mtr: 		NUMROW: 16,384 - 14 rows
[ 1952.639383] EDAC DEBUG: decode_mtr: 		NUMCOL: 1,024 - 10 columns
[ 1952.639384] EDAC DEBUG: decode_mtr: 		SIZE: 512 MB
[ 1952.639385] EDAC DEBUG: decode_mtr: 		ECC code is 8-byte-over-32-byte SECDED+ code
[ 1952.639387] EDAC DEBUG: decode_mtr: 		Scrub algorithm for x8 is on enhanced mode
...
[ 1952.639449] EDAC DEBUG: print_dimm_size:               channel 0 | channel 1 | channel 2 | channel 3 |
[ 1952.639451] EDAC DEBUG: print_dimm_size: -------------------------------------------------------------
[ 1952.639453] EDAC DEBUG: print_dimm_size: csrow/SLOT 0   512 MB   |  512 MB   |    0 MB   |    0 MB   |
[ 1952.639456] EDAC DEBUG: print_dimm_size: csrow/SLOT 1     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639458] EDAC DEBUG: print_dimm_size: csrow/SLOT 2     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639460] EDAC DEBUG: print_dimm_size: csrow/SLOT 3     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639462] EDAC DEBUG: print_dimm_size: csrow/SLOT 4     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639464] EDAC DEBUG: print_dimm_size: csrow/SLOT 5     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639466] EDAC DEBUG: print_dimm_size: csrow/SLOT 6     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639468] EDAC DEBUG: print_dimm_size: csrow/SLOT 7     0 MB   |    0 MB   |    0 MB   |    0 MB   |
[ 1952.639470] EDAC DEBUG: print_dimm_size: -------------------------------------------------------------

Instead of detecting a single memory at channel 0, it is showing
twice the memory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29 10:32:39 -03:00
Greg Kroah-Hartman 9b3c6e85c2 Drivers: edac: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:03 -08:00
Jean Delvare 7e06b7a333 i7300_edac: Fix error flag testing
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so
  that the callers get the result they expect.
* Fix definition of FERR_FAT_FBD_ERR_MASK.
* Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on
  register FERR_NF_FBD. We were lucky they have the same definition.

This fixes kernel bug #44131:
https://bugzilla.kernel.org/show_bug.cgi?id=44131

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25 07:43:00 -02:00
Mauro Carvalho Chehab 9eb07a7fb8 edac: edac_mc_handle_error(): add an error_count parameter
In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.

The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.

The changes at the drivers were made by this small script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
	print $file;

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12 12:15:47 -03:00
Mauro Carvalho Chehab 03f7eae80f edac: remove arch-specific parameter for the error handler
Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.

The changes at the EDAC drivers were done by this small perl script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
	print $file;

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:52 -03:00
Joe Perches 956b9ba156 edac: Convert debugfX to edac_dbg(X,
Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:49 -03:00
Joe Perches 7e881856ee edac: Use more normal debugging macro style
Convert macros to a simpler style and enforce appropriate
format checking when not CONFIG_EDAC_DEBUG.

Use fmt and __VA_ARGS__, neaten macros.

Move some string arrays to the debugfx uses and remove the
now unnecessary CONFIG_EDAC_DEBUG variable block definitions.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:48 -03:00
Mauro Carvalho Chehab dd23cd6eb1 edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
The debug macro already adds that. Most of the work here was
made by this small script:

$f .=$_ while (<>);

$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;

$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;

$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;

print $f;

After running the script, manual cleanups were done to fix it the remaining
places.

While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:47 -03:00
Mauro Carvalho Chehab fd687502dc edac: Rename the parent dev to pdev
As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev".  Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.

No functional changes.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 11:56:06 -03:00
Mauro Carvalho Chehab ca0907b9e4 edac: Remove the legacy EDAC ABI
Now that all drivers got converted to use the new ABI, we can
drop the old one.

Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:13:50 -03:00
Mauro Carvalho Chehab 70e2a8379b i7300_edac: convert driver to use the new edac ABI
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:13:41 -03:00
Mauro Carvalho Chehab a895bf8b1e edac: move nr_pages to dimm struct
The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Mauro Carvalho Chehab 5e2af0c09e edac: Don't initialize csrow's first_page & friends when not needed
Almost all edac	drivers	initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().

However, very few drivers actually use it:
        e752x_edac.c
        e7xxx_edac.c
        i3000_edac.c
        i82443bxgx_edac.c
        i82860_edac.c
        i82875p_edac.c
        i82975x_edac.c
        r82600_edac.c

There also a few other drivers that have their own calculus
formula internally using those vars.

All the others are just wasting time by initializing those
data.

While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Mauro Carvalho Chehab 084a4fccef edac: move dimm properties to struct dimm_info
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.

However, such assumption is not true for all types of memory
controllers.

Controllers for FB-DIMM's don't have such requirements.

Also, modern Intel controllers seem to be capable of handling such
differences.

So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.

The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.

Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:58 -03:00
Lionel Debroux 36c46f31df EDAC: Make pci_device_id tables __devinitconst.
These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:

"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."

So use DEFINE_PCI_DEVICE_TABLE(x).

Based on PaX and earlier work by Andi Kleen.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-03-19 12:04:54 +01:00
Mauro Carvalho Chehab 5f032119d6 i7300_edac: Fix error cleanup logic
The error cleanup logic was broken. Due to that, one error is generated for
every error polling.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-01 10:01:53 -02:00
Linus Torvalds b7c2f03628 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  gfs2: Drop __TIME__ usage
  isdn/diva: Drop __TIME__ usage
  atm: Drop __TIME__ usage
  dlm: Drop __TIME__ usage
  wan/pc300: Drop __TIME__ usage
  parport: Drop __TIME__ usage
  hdlcdrv: Drop __TIME__ usage
  baycom: Drop __TIME__ usage
  pmcraid: Drop __DATE__ usage
  edac: Drop __DATE__ usage
  rio: Drop __DATE__ usage
  scsi/wd33c93: Drop __TIME__ usage
  scsi/in2000: Drop __TIME__ usage
  aacraid: Drop __TIME__ usage
  media/cx231xx: Drop __TIME__ usage
  media/radio-maxiradio: Drop __TIME__ usage
  nozomi: Drop __TIME__ usage
  cyclades: Drop __TIME__ usage
2011-05-26 13:19:00 -07:00
Michal Marek 152ba39422 edac: Drop __DATE__ usage
The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Cc: Doug Thompson <dougthompson@xmission.com>
Cc: bluesmoke-devel@lists.sourceforge.net
Cc: linux-edac@vger.kernel.org
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-04-19 00:23:22 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jesper Juhl 42b16b3fbb Kill off warning: ‘inline’ is not at beginning of declaration
Fix a bunch of
	warning: ‘inline’ is not at beginning of declaration
messages when building a 'make allyesconfig' kernel with -Wextra.

These warnings are trivial to kill, yet rather annoying when building with
-Wextra.
The more we can cut down on pointless crap like this the better (IMHO).

A previous patch to do this for a 'allnoconfig' build has already been
merged. This just takes the cleanup a little further.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-19 15:43:08 +01:00
Mauro Carvalho Chehab e6649cc629 i7300_edac: Properly initialize per-csrow memory size
Due to the current edac-core limits, we cannot represent a per-channel
memory size, for FB-DIMM drivers. So, we need to sum-up all values
for each slot, in order to properly represent the total amount of
memory found by the i7300 driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-24 14:16:12 -03:00
Mauro Carvalho Chehab 1aa4a7b6b0 V4L/DVB: i7300_edac: better initialize page counts
It is still somewhat fake, as the pages may not be on this exact order,
and may even be used in mirror mode, but this is a best guess than the
other random fake values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-24 14:16:12 -03:00
Mauro Carvalho Chehab 9c6f6b65d2 i7300-edac: CodingStyle cleanup
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:06 -03:00
Mauro Carvalho Chehab d091a6eb17 i7300_edac: Improve comments
This is basically a cleanup patch, improving the comments for each
function.

While here, do a few cleanups.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:05 -03:00
Mauro Carvalho Chehab b4552aceb3 i7300_edac: Cleanup: reorganize the file contents
This change should do no functional change. It just rearranges the
contents of the c file, in order to make easier to understand and
maintain it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:04 -03:00
Mauro Carvalho Chehab 37b69cf91c i7300_edac: Properly detect channel on CE errors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:03 -03:00
Mauro Carvalho Chehab 32f9472613 i7300_edac: enrich FBD error info for corrected errors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:02 -03:00
Mauro Carvalho Chehab 8199d8cc65 i7300_edac: enrich FBD error info for fatal errors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:57:01 -03:00
Mauro Carvalho Chehab 85580ea4f7 i7300_edac: pre-allocate a buffer used to prepare err messages
Instead of dynamically allocating a buffer for it where needed,
just allocate it once. As we'll use the same buffer also during
fatal and non-fatal errors, is is very risky to dynamically allocate
it during an error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:59 -03:00
Mauro Carvalho Chehab 28c2ce7c8b i7300_edac: Fix MTR x4/x8 detection logic
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:58 -03:00
Mauro Carvalho Chehab 3b330f6758 i7300_edac: Make the debug messages coherent with the others
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:57 -03:00
Mauro Carvalho Chehab f427742248 i7300_edac: Cleanup: remove get_error_info logic
As the error logic in this driver came from i5400 driver, it
were using one function to get errors, and another to display.
Let's make it simpler and avoid doing it into two steps.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:56 -03:00
Mauro Carvalho Chehab e432760509 i7300_edac: Add a code to cleanup error registers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:55 -03:00
Mauro Carvalho Chehab 57021918aa i7300_edac: Add support for reporting FBD errors
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:54 -03:00
Mauro Carvalho Chehab 15154c57c6 i7300_edac: Properly detect the type of error correction
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:52 -03:00
Mauro Carvalho Chehab bb81a21637 i7300_edac: Detect if the device is on single mode
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:51 -03:00
Mauro Carvalho Chehab d7de2bdb0e i7300_edac: Adds detection for enhanced scrub mode on x8
While here, do some cleanup by adding some macros to check
for device features.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:50 -03:00
Mauro Carvalho Chehab 86002324cf i7300_edac: Clear the error bit after reading
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:49 -03:00
Mauro Carvalho Chehab 5de6e07ed7 i7300_edac: Add error detection code for global errors
There's no mention at the datasheet about how to enable global error
reporting. So, I'm assuming that those errors are always enabled.
Maybe I'm plain wrong about that ;)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:48 -03:00
Mauro Carvalho Chehab 3e57eef64c i7300_edac: Better name PCI devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:47 -03:00
Mauro Carvalho Chehab 116389ed21 i7300_edac: Add a FIXME note about the error correction type
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:45 -03:00
Mauro Carvalho Chehab c3af2eaf7a i7300_edac: add global error registers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:44 -03:00
Mauro Carvalho Chehab af3d8831e7 i7300_edac: display info if ECC is enabled or not
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:43 -03:00
Mauro Carvalho Chehab fcaf780b2a i7300_edac: start a driver for i7300 chipset (Clarksboro)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-30 14:56:42 -03:00