Commit graph

4349 commits

Author SHA1 Message Date
Kiselev, Oleg
026d0d27c4 ext4: reduce computation of overhead during resize
This patch avoids doing an O(n**2)-complexity walk through every flex group.
Instead, it uses the already computed overhead information for the newly
allocated space, and simply adds it to the previously calculated
overhead stored in the superblock.  This drastically reduces the time
taken to resize very large bigalloc filesystems (from 3+ hours for a
64TB fs down to milliseconds).

Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/CE4F359F-4779-45E6-B6A9-8D67FDFF5AE2@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:25 -04:00
Lukas Czerner
1e1c2b86ef ext4: block range must be validated before use in ext4_mb_clear_bb()
Block range to free is validated in ext4_free_blocks() using
ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb().
However in some situations on bigalloc file system the range might be
adjusted after the validation in ext4_free_blocks() which can lead to
troubles on corrupted file systems such as one found by syzkaller that
resulted in the following BUG

kernel BUG at fs/ext4/ext4.h:3319!
PREEMPT SMP NOPTI
CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:ext4_free_blocks+0x95e/0xa90
Call Trace:
 <TASK>
 ? lock_timer_base+0x61/0x80
 ? __es_remove_extent+0x5a/0x760
 ? __mod_timer+0x256/0x380
 ? ext4_ind_truncate_ensure_credits+0x90/0x220
 ext4_clear_blocks+0x107/0x1b0
 ext4_free_data+0x15b/0x170
 ext4_ind_truncate+0x214/0x2c0
 ? _raw_spin_unlock+0x15/0x30
 ? ext4_discard_preallocations+0x15a/0x410
 ? ext4_journal_check_start+0xe/0x90
 ? __ext4_journal_start_sb+0x2f/0x110
 ext4_truncate+0x1b5/0x460
 ? __ext4_journal_start_sb+0x2f/0x110
 ext4_evict_inode+0x2b4/0x6f0
 evict+0xd0/0x1d0
 ext4_enable_quotas+0x11f/0x1f0
 ext4_orphan_cleanup+0x3de/0x430
 ? proc_create_seq_private+0x43/0x50
 ext4_fill_super+0x295f/0x3ae0
 ? snprintf+0x39/0x40
 ? sget_fc+0x19c/0x330
 ? ext4_reconfigure+0x850/0x850
 get_tree_bdev+0x16d/0x260
 vfs_get_tree+0x25/0xb0
 path_mount+0x431/0xa70
 __x64_sys_mount+0xe2/0x120
 do_syscall_64+0x5b/0x80
 ? do_user_addr_fault+0x1e2/0x670
 ? exc_page_fault+0x70/0x170
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf4e512ace

Fix it by making sure that the block range is properly validated before
used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().

Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:25 -04:00
Jan Kara
65f8b80053 ext4: fix race when reusing xattr blocks
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:

CPU1                                    CPU2
ext4_xattr_block_set()                  ext4_xattr_release_block()
  new_bh = ext4_xattr_block_cache_find()

                                          lock_buffer(bh);
                                          ref = le32_to_cpu(BHDR(bh)->h_refcount);
                                          if (ref == 1) {
                                            ...
                                            mb_cache_entry_delete();
                                            unlock_buffer(bh);
                                            ext4_free_blocks();
                                              ...
                                              ext4_forget(..., bh, ...);
                                                jbd2_journal_revoke(..., bh);

  ext4_journal_get_write_access(..., new_bh, ...)
    do_get_write_access()
      jbd2_journal_cancel_revoke(..., new_bh);

Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.

Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.

Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:25 -04:00
Jan Kara
fd48e9acdf ext4: unindent codeblock in ext4_xattr_block_set()
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.

CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:25 -04:00
Jan Kara
6bc0d63dad ext4: remove EA inode entry from mbcache on inode eviction
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.

CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:25 -04:00
Lukas Czerner
b8a04fe77e ext4: make sure ext4_append() always allocates new block
ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.

Add a sanity check to see if the logical block is already allocated and
error out if it is.

Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:17 -04:00
Lukas Czerner
65f8ea4cd5 ext4: check if directory block is within i_size
Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.

However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.

Fix it by catching the corruption early in __ext4_read_dirblock().

Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:17 -04:00
Ojaswin Mujoo
3fa5d23e68 ext4: reflect mb_optimize_scan value in options file
Add support to display the mb_optimize_scan value in
/proc/fs/ext4/<dev>/options file. The option is only
displayed when the value is non default.

Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20220704054603.21462-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:17 -04:00
Ye Bin
b24e77ef1c ext4: avoid remove directory when directory is corrupted
Now if check directoy entry is corrupted, ext4_empty_dir may return true
then directory will be removed when file system mounted with "errors=continue".
In order not to make things worse just return false when directory is corrupted.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:17 -04:00
Jiang Jian
c64a92992e ext4: aligned '*' in comments
The '*' in the comment is not aligned.

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621061531.19669-1-jiangjian@cdjrlc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:17 -04:00
Li Lingfeng
07ea7a617d ext4: recover csum seed of tmp_inode after migrating to extents
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.

However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.

mkfs.ext4 -F /dev/sdc
mount /dev/sdc /mnt/sdc
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile
chattr -e /mnt/sdc/testfile
chattr +e /mnt/sdc/testfile
umount /dev/sdc
fsck -fn /dev/sdc

========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode.  Fix? no
...
========

The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.

Fixes: e81c9302a6 ("ext4: set csum seed in tmp inode while migrating to extents")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:56:02 -04:00
Ye Bin
51ae846cff ext4: fix warning in ext4_iomap_begin as race between bmap and write
We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS:  00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 iomap_apply+0x119/0x570
 iomap_bmap+0x124/0x150
 ext4_bmap+0x14f/0x250
 bmap+0x55/0x80
 do_vfs_ioctl+0x952/0xbd0
 __x64_sys_ioctl+0xc6/0x170
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Above issue may happen as follows:
          bmap                    write
bmap
  ext4_bmap
    iomap_bmap
      ext4_iomap_begin
                            ext4_file_write_iter
			      ext4_buffered_write_iter
			        generic_perform_write
				  ext4_da_write_begin
				    ext4_da_write_inline_data_begin
				      ext4_prepare_inline_data
				        ext4_create_inline_data
					  ext4_set_inode_flag(inode,
						EXT4_INODE_INLINE_DATA);
      if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on

To solved above issue hold inode lock in ext4_bamp.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220617013935.397596-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2022-08-02 23:56:02 -04:00
Baokun Li
fd7e672ea9 ext4: correct the misjudgment in ext4_iget_extra_inode
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:55:55 -04:00
Baokun Li
c9fd167d57 ext4: correct max_inline_xattr_value_size computing
If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:44 -04:00
Baokun Li
67d7d8ad99 ext4: fix use-after-free in ext4_xattr_set_entry
Hulk Robot reported a issue:
==================================================================
BUG: KASAN: use-after-free in ext4_xattr_set_entry+0x18ab/0x3500
Write of size 4105 at addr ffff8881675ef5f4 by task syz-executor.0/7092

CPU: 1 PID: 7092 Comm: syz-executor.0 Not tainted 4.19.90-dirty #17
Call Trace:
[...]
 memcpy+0x34/0x50 mm/kasan/kasan.c:303
 ext4_xattr_set_entry+0x18ab/0x3500 fs/ext4/xattr.c:1747
 ext4_xattr_ibody_inline_set+0x86/0x2a0 fs/ext4/xattr.c:2205
 ext4_xattr_set_handle+0x940/0x1300 fs/ext4/xattr.c:2386
 ext4_xattr_set+0x1da/0x300 fs/ext4/xattr.c:2498
 __vfs_setxattr+0x112/0x170 fs/xattr.c:149
 __vfs_setxattr_noperm+0x11b/0x2a0 fs/xattr.c:180
 __vfs_setxattr_locked+0x17b/0x250 fs/xattr.c:238
 vfs_setxattr+0xed/0x270 fs/xattr.c:255
 setxattr+0x235/0x330 fs/xattr.c:520
 path_setxattr+0x176/0x190 fs/xattr.c:539
 __do_sys_lsetxattr fs/xattr.c:561 [inline]
 __se_sys_lsetxattr fs/xattr.c:557 [inline]
 __x64_sys_lsetxattr+0xc2/0x160 fs/xattr.c:557
 do_syscall_64+0xdf/0x530 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x459fe9
RSP: 002b:00007fa5e54b4c08 EFLAGS: 00000246 ORIG_RAX: 00000000000000bd
RAX: ffffffffffffffda RBX: 000000000051bf60 RCX: 0000000000459fe9
RDX: 00000000200003c0 RSI: 0000000020000180 RDI: 0000000020000140
RBP: 000000000051bf60 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000001009 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc73c93fc0 R14: 000000000051bf60 R15: 00007fa5e54b4d80
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_xattr_set
  ext4_xattr_set_handle
    ext4_xattr_ibody_find
      >> s->end < s->base
      >> no EXT4_STATE_XATTR
      >> xattr_check_inode is not executed
    ext4_xattr_ibody_set
      ext4_xattr_set_entry
       >> size_t min_offs = s->end - s->base
       >> UAF in memcpy

we can easily reproduce this problem with the following commands:
    mkfs.ext4 -F /dev/sda
    mount -o debug_want_extra_isize=128 /dev/sda /mnt
    touch /mnt/file
    setfattr -n user.cat -v `seq -s z 4096|tr -d '[:digit:]'` /mnt/file

In ext4_xattr_ibody_find, we have the following assignment logic:
  header = IHDR(inode, raw_inode)
         = raw_inode + EXT4_GOOD_OLD_INODE_SIZE + i_extra_isize
  is->s.base = IFIRST(header)
             = header + sizeof(struct ext4_xattr_ibody_header)
  is->s.end = raw_inode + s_inode_size

In ext4_xattr_set_entry
  min_offs = s->end - s->base
           = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
	     sizeof(struct ext4_xattr_ibody_header)
  last = s->first
  free = min_offs - ((void *)last - s->base) - sizeof(__u32)
       = s_inode_size - EXT4_GOOD_OLD_INODE_SIZE - i_extra_isize -
         sizeof(struct ext4_xattr_ibody_header) - sizeof(__u32)

In the calculation formula, all values except s_inode_size and
i_extra_size are fixed values. When i_extra_size is the maximum value
s_inode_size - EXT4_GOOD_OLD_INODE_SIZE, min_offs is -4 and free is -8.
The value overflows. As a result, the preceding issue is triggered when
memcpy is executed.

Therefore, when finding xattr or setting xattr, check whether
there is space for storing xattr in the inode to resolve this issue.

Cc: stable@kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:34 -04:00
Baokun Li
179b14152d ext4: add EXT4_INODE_HAS_XATTR_SPACE macro in xattr.h
When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:34 -04:00
Eric Whitney
7f0d8e1d60 ext4: fix extent status tree race in writeback error recovery path
A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback.  Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages().  That function
removes any corresponding delayed allocated blocks from the extent
status tree.  If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.

Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem.  Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.

Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:19 -04:00
Jan Kara
4978c659e7 ext4: use ext4_debug() instead of jbd_debug()
We use jbd_debug() in some places in ext4. It seems a bit strange to use
jbd2 debugging output function for ext4 code. Also these days
ext4_debug() uses dynamic printk so each debug message can be enabled /
disabled on its own so the time when it made some sense to have these
combined (to allow easier common selecting of messages to report) has
passed. Just convert all jbd_debug() uses in ext4 to ext4_debug().

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:19 -04:00
hanjinke
218a69441b ext4: reuse order and buddy in mb_mark_used when buddy split
After each buddy split, mb_mark_used will search the proper order
for the block which may consume some loop in mb_find_order_for_block.
In fact, we can reuse the order and buddy generated by the buddy split.

Reviewed by: lei.rao@intel.com
Signed-off-by: hanjinke <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220606155305.74146-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:19 -04:00
Theodore Ts'o
827891a38a ext4: update the s_overhead_clusters in the backup sb's when resizing
When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks.  We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:19 -04:00
Theodore Ts'o
de394a8665 ext4: update s_overhead_clusters in the superblock during an on-line resize
When doing an online resize, the on-disk superblock on-disk wasn't
updated.  This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.

This was partially fixed by Commits 10b01ee92d ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf4
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212e ("ext4: update the cached overhead value in
the superblock").

However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems.  This commit should address the
problem when resizing file systems with the bigalloc feature enabled.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:52:19 -04:00
Zhang Yi
5a57bca905 ext4: fix reading leftover inlined symlinks
Since commit 6493792d32 ("ext4: convert symlink external data block
mapping to bdev"), create new symlink with inline_data is not supported,
but it missing to handle the leftover inlined symlinks, which could
cause below error message and fail to read symlink.

 ls: cannot read symbolic link 'foo': Structure needs cleaning

 EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block
 2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080
 (length 1)

Fix this regression by adding ext4_read_inline_link(), which read the
inline data directly and convert it through a kmalloced buffer.

Fixes: 6493792d32 ("ext4: convert symlink external data block mapping to bdev")
Cc: stable@kernel.org
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Torge Matthies <openglfreak@googlemail.com>
Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-08-02 23:37:50 -04:00
Xiang wangx
1f3ddff375 ext4: fix a doubled word "need" in a comment
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220605091503.12513-1-wangxiang@cdjrlc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:36:20 -04:00
Zhang Yi
b55c3cd102 ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.

 mkfs.ext4 /dev/sda 3G
 tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
 mount /dev/sda /mnt
 resize2fs /dev/sda 8G

 ========
 BUG: kernel NULL pointer dereference, address: 0000000000000028
 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
 ...
 RIP: 0010:ext4_flex_group_add+0xe08/0x2570
 ...
 Call Trace:
  <TASK>
  ext4_resize_fs+0xbec/0x1660
  __ext4_ioctl+0x1749/0x24e0
  ext4_ioctl+0x12/0x20
  __x64_sys_ioctl+0xa6/0x110
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2dd739617b
 ========

The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:36:08 -04:00
Ding Xiang
bc75a6eb85 ext4: make variable "count" signed
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().

Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:57 -04:00
Baokun Li
cf4ff938b4 ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:57 -04:00
Baokun Li
a08f789d2a ext4: fix bug_on ext4_mb_use_inode_pa
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
 ext4_mb_new_blocks+0x9df/0x5d30
 ext4_ext_map_blocks+0x1803/0x4d80
 ext4_map_blocks+0x3a4/0x1a10
 ext4_writepages+0x126d/0x2c30
 do_writepages+0x7f/0x1b0
 __filemap_fdatawrite_range+0x285/0x3b0
 file_write_and_wait_range+0xb1/0x140
 ext4_sync_file+0x1aa/0xca0
 vfs_fsync_range+0xfb/0x260
 do_fsync+0x48/0xa0
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
do_fsync
 vfs_fsync_range
  ext4_sync_file
   file_write_and_wait_range
    __filemap_fdatawrite_range
     do_writepages
      ext4_writepages
       mpage_map_and_submit_extent
        mpage_map_one_extent
         ext4_map_blocks
          ext4_mb_new_blocks
           ext4_mb_normalize_request
            >>> start + size <= ac->ac_o_ex.fe_logical
           ext4_mb_regular_allocator
            ext4_mb_simple_scan_group
             ext4_mb_use_best_found
              ext4_mb_new_preallocation
               ext4_mb_new_inode_pa
                ext4_mb_use_inode_pa
                 >>> set ac->ac_b_ex.fe_len <= 0
           ext4_mb_mark_diskspace_used
            >>> BUG_ON(ac->ac_b_ex.fe_len <= 0);

we can easily reproduce this problem with the following commands:
	`fallocate -l100M disk`
	`mkfs.ext4 -b 1024 -g 256 disk`
	`mount disk /mnt`
	`fsstress -d /mnt -l 0 -n 1000 -p 1`

The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.

Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Eric Biggers
85456054e1 ext4: fix up test_dummy_encryption handling for new mount API
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function.  That doesn't work well
with the new mount API, which split these into separate steps.

This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.

Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.

Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Shuqi Zhang
4efd9f0d12 ext4: use kmemdup() to replace kmalloc + memcpy
Replace kmalloc + memcpy with kmemdup()

Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525030120.803330-1-zhangshuqi3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:43 -04:00
Ye Bin
9b6641dd95 ext4: fix super block checksum incorrect after mount
We got issue as follows:
[home]# mount  /dev/sda  test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock!  Retrying...

Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.

To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-18 19:35:24 -04:00
Jan Kara
8d5459c11f ext4: improve write performance with disabled delalloc
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-16 12:17:56 -04:00
Zhang Yi
15baa7dcad ext4: fix warning when submitting superblock in ext4_commit_super()
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-16 11:50:48 -04:00
Wang Jianjian
48e02e6113 ext4: fix incorrect comment in ext4_bio_write_page()
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Link: https://lore.kernel.org/r/20220520022255.2120576-1-wangjianjian3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-06-16 11:03:16 -04:00
Linus Torvalds
fdaf9a5840 Page cache changes for 5.19
- Appoint myself page cache maintainer
 
  - Fix how scsicam uses the page cache
 
  - Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
 
  - Remove the AOP flags entirely
 
  - Remove pagecache_write_begin() and pagecache_write_end()
 
  - Documentation updates
 
  - Convert several address_space operations to use folios:
    - is_dirty_writeback
    - readpage becomes read_folio
    - releasepage becomes release_folio
    - freepage becomes free_folio
 
  - Change filler_t to require a struct file pointer be the first argument
    like ->read_folio
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
 gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
 7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
 xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
 nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
 bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
 WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
 =djLv
 -----END PGP SIGNATURE-----

Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache

Pull page cache updates from Matthew Wilcox:

 - Appoint myself page cache maintainer

 - Fix how scsicam uses the page cache

 - Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS

 - Remove the AOP flags entirely

 - Remove pagecache_write_begin() and pagecache_write_end()

 - Documentation updates

 - Convert several address_space operations to use folios:
     - is_dirty_writeback
     - readpage becomes read_folio
     - releasepage becomes release_folio
     - freepage becomes free_folio

 - Change filler_t to require a struct file pointer be the first
   argument like ->read_folio

* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
  nilfs2: Fix some kernel-doc comments
  Appoint myself page cache maintainer
  fs: Remove aops->freepage
  secretmem: Convert to free_folio
  nfs: Convert to free_folio
  orangefs: Convert to free_folio
  fs: Add free_folio address space operation
  fs: Convert drop_buffers() to use a folio
  fs: Change try_to_free_buffers() to take a folio
  jbd2: Convert release_buffer_page() to use a folio
  jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
  reiserfs: Convert release_buffer_page() to use a folio
  fs: Remove last vestiges of releasepage
  ubifs: Convert to release_folio
  reiserfs: Convert to release_folio
  orangefs: Convert to release_folio
  ocfs2: Convert to release_folio
  nilfs2: Remove comment about releasepage
  nfs: Convert to release_folio
  jfs: Convert to release_folio
  ...
2022-05-24 19:55:07 -07:00
Linus Torvalds
fea3043314 Various bug fixes and cleanups for ext4. In particular, move the
crypto related fucntions from fs/ext4/super.c into a new
 fs/ext4/crypto.c, and fix a number of bugs found by fuzzers and error
 injection tools.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKNOh0ACgkQ8vlZVpUN
 gaP4kwf+KfqZ/iBDOOCMKV5C7/Z4ieiMLeNqzCWmvju7jceYBoSLOIz3w5MFjEV9
 5ZB/6MovMZ/vZRtm76k0K01ayHKUd1BKjwwvIaABjdNVDTar5Wg/Tq7MF0OMQ5Kw
 ec5rvOQ05VzbXwf/JOjp7IHP/9yEbtgKjAYzgVyMVGrE8jxLQ+UOSUBzzZEHv/js
 Xh7GmRGEs5V7bj+V4SuCaEKSf3wYjT/zlJNIPtsg9RJeQojOP2qlOFhcGeduF1X/
 E4OwabfHqdmlbdI0vL3ANb8nByi/bA0p8i9PGqGIDx0nRUK9UzJCjePmkPux6koT
 pPZLo8DKR8g5i0Hn/ennA9tAIXIaXg==
 =OliY
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Various bug fixes and cleanups for ext4.

  In particular, move the crypto related fucntions from fs/ext4/super.c
  into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
  and error injection tools"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: only allow test_dummy_encryption when supported
  ext4: fix bug_on in __es_tree_search
  ext4: avoid cycles in directory h-tree
  ext4: verify dir block before splitting it
  ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
  ext4: fix bug_on in ext4_writepages
  ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
  ext4: cleanup function defs from ext4.h into crypto.c
  ext4: move ext4 crypto code to its own file crypto.c
  ext4: fix memory leak in parse_apply_sb_mount_options()
  ext4: reject the 'commit' option on ext2 filesystems
  ext4: remove duplicated #include of dax.h in inode.c
  ext4: fix race condition between ext4_write and ext4_convert_inline_data
  ext4: convert symlink external data block mapping to bdev
  ext4: add nowait mode for ext4_getblk()
  ext4: fix journal_ioprio mount option handling
  ext4: mark group as trimmed only if it was fully scanned
  ext4: fix use-after-free in ext4_rename_dir_prepare
  ext4: add unmount filesystem message
  ext4: remove unnecessary conditionals
  ...
2022-05-24 19:04:46 -07:00
Linus Torvalds
bd1b7c1384 for-5.19-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmKLxJAACgkQxWXV+ddt
 WDvC4BAAnSNwZ15FJKe5Y423f6PS6EXjyMuc5t/fW6UumTTbI+tsS+Glkis+JNBf
 BiDZSlVQmiK9WoQSJe04epZgHaK8MaCARyZaRaxjDC4Nvfq4DlD9mbAU9D6e7tZY
 Mo8M99D8wDW+SB+P8RBpNjwB/oGCMmE3nKC83g+1ObmA0FVRCyQ1Kazf8RzNT1rZ
 DiaJoKTvU1/wDN3/1rw5yG+EfW2m9A14gRCihslhFYaDV7jhpuabl8wLT7MftZtE
 MtJ6EOOQbgIDjnp5BEIrPmowW/N0tKDT/gorF7cWgLG2R1cbSlKgqSH1Sq7CjFUE
 AKj/DwfqZArPLpqMThWklCwy2B9qDEezrQSy7renP/vkeFLbOp8hQuIY5KRzohdG
 oDI8ThlQGtCVjbny6NX/BbCnWRAfTz0TquCgag3Xl8NbkRFgFJtkf/cSxzb+3LW1
 tFeiUyTVLXVDS1cZLwgcb29Rrtp4bjd5/v3uECQlVD+or5pcAqSMkQgOBlyQJGbE
 Xb0nmPRihzQ8D4vINa63WwRyq0+QczVjvBxKj1daas0VEKGd32PIBS/0Qha+EpGl
 uFMiHBMSfqyl8QcShFk0cCbcgPMcNc7I6IAbXCE/WhhFG0ytqm9vpmlLqsTrXmHH
 z7/Eye/waqgACNEXoA8C4pyYzduQ4i1CeLDOdcsvBU6XQSuicSM=
 =lv6P
 -----END PGP SIGNATURE-----

Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "Features:

   - subpage:
      - support for PAGE_SIZE > 4K (previously only 64K)
      - make it work with raid56

   - repair super block num_devices automatically if it does not match
     the number of device items

   - defrag can convert inline extents to regular extents, up to now
     inline files were skipped but the setting of mount option
     max_inline could affect the decision logic

   - zoned:
      - minimal accepted zone size is explicitly set to 4MiB
      - make zone reclaim less aggressive and don't reclaim if there are
        enough free zones
      - add per-profile sysfs tunable of the reclaim threshold

   - allow automatic block group reclaim for non-zoned filesystems, with
     sysfs tunables

   - tree-checker: new check, compare extent buffer owner against owner
     rootid

  Performance:

   - avoid blocking on space reservation when doing nowait direct io
     writes (+7% throughput for reads and writes)

   - NOCOW write throughput improvement due to refined locking (+3%)

   - send: reduce pressure to page cache by dropping extent pages right
     after they're processed

  Core:

   - convert all radix trees to xarray

   - add iterators for b-tree node items

   - support printk message index

   - user bulk page allocation for extent buffers

   - switch to bio_alloc API, use on-stack bios where convenient, other
     bio cleanups

   - use rw lock for block groups to favor concurrent reads

   - simplify workques, don't allocate high priority threads for all
     normal queues as we need only one

   - refactor scrub, process chunks based on their constraints and
     similarity

   - allocate direct io structures on stack and pass around only
     pointers, avoids allocation and reduces potential error handling

  Fixes:

   - fix count of reserved transaction items for various inode
     operations

   - fix deadlock between concurrent dio writes when low on free data
     space

   - fix a few cases when zones need to be finished

  VFS, iomap:

   - add helper to check if sb write has started (usable for assertions)

   - new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"

* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
  btrfs: zoned: introduce a minimal zone size 4M and reject mount
  btrfs: allow defrag to convert inline extents to regular extents
  btrfs: add "0x" prefix for unsupported optional features
  btrfs: do not account twice for inode ref when reserving metadata units
  btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
  btrfs: send: avoid trashing the page cache
  btrfs: send: keep the current inode open while processing it
  btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
  btrfs: move struct btrfs_dio_private to inode.c
  btrfs: remove the disk_bytenr in struct btrfs_dio_private
  btrfs: allocate dio_data on stack
  iomap: add per-iomap_iter private data
  iomap: allow the file system to provide a bio_set for direct I/O
  btrfs: add a btrfs_dio_rw wrapper
  btrfs: zoned: zone finish unused block group
  btrfs: zoned: properly finish block group on metadata write
  btrfs: zoned: finish block group when there are no more allocatable bytes left
  btrfs: zoned: consolidate zone finish functions
  btrfs: zoned: introduce btrfs_zoned_bg_is_full
  btrfs: improve error reporting in lookup_inline_extent_backref
  ...
2022-05-24 18:52:35 -07:00
Eric Biggers
5f41fdaea6 ext4: only allow test_dummy_encryption when supported
Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it.  Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option.  (ext4/053 also needs an update.)

Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.

The motivation for requiring the encrypt feature flag is that:

- Having the filesystem auto-enable feature flags is problematic, as it
  bypasses the usual sanity checks.  The specific issue which came up
  recently is that in kernel versions where ext4 supports casefold but
  not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
  the encrypt flag to a filesystem that has the casefold flag, making it
  unmountable -- but only for subsequent mounts, not the initial one.
  This confused the casefold support detection in xfstests, causing
  generic/556 to fail rather than be skipped.

- The xfstests-bld test runners (kvm-xfstests et al.) already use the
  required mkfs flag, so they will not be affected by this change.  Only
  users of test_dummy_encryption alone will be affected.  But, this
  option has always been for testing only, so it should be fine to
  require that the few users of this option update their test scripts.

- f2fs already requires it (for its equivalent feature flag).

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-24 15:34:27 -04:00
Baokun Li
d36f6ed761 ext4: fix bug_on in __es_tree_search
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
 ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
 ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
 ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
 ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
 ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
 ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
 ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
 ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
 v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
 v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
 vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
 dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
 ext4_quota_enable fs/ext4/super.c:6137 [inline]
 ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
 ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
 mount_bdev+0x2e9/0x3b0 fs/super.c:1158
 mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_fill_super
 ext4_enable_quotas
  ext4_quota_enable
   ext4_iget
    __ext4_iget
     ext4_ext_check_inode
      ext4_ext_check
       __ext4_ext_check
        ext4_valid_extent_entries
         Check for overlapping extents does't take effect
   dquot_enable
    vfs_load_quota_inode
     v2_check_quota_file
      v2_read_header
       ext4_quota_read
        ext4_bread
         ext4_getblk
          ext4_map_blocks
           ext4_ext_map_blocks
            ext4_find_extent
             ext4_cache_extents
              ext4_es_cache_extent
               ext4_es_cache_extent
                __es_tree_search
                 ext4_es_end
                  BUG_ON(es->es_lblk + es->es_len < es->es_lblk)

The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000    extent_header
00000000 0100 0000 12000000     extent1
00000000 0100 0000 18000000     extent2
02000000 0400 0000 14000000     extent3

In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.

To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent  is not less than
   the next block of the previous extent.
The same applies to extent_idx.

Cc: stable@kernel.org
Fixes: 5946d08937 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-24 15:34:17 -04:00
Jan Kara
3ba733f879 ext4: avoid cycles in directory h-tree
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.

Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-24 15:34:13 -04:00
Jan Kara
46c116b920 ext4: verify dir block before splitting it
Before splitting a directory block verify its directory entries are sane
so that the splitting code does not access memory it should not.

Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-24 15:34:08 -04:00
Theodore Ts'o
c878bea3c9 ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that
we are in the middle of replay the fast commit journal.  This was
actually a mistake, since the sbi->s_mount_info is initialized from
es->s_state.  Arguably s_mount_state is misleadingly named, but the
name is historical --- s_mount_state and s_state dates back to ext2.

What should have been used is the ext4_{set,clear,test}_mount_flag()
inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags.

The problem with using EXT4_FC_REPLAY is that a maliciously corrupted
superblock could result in EXT4_FC_REPLAY getting set in
s_mount_state.  This bypasses some sanity checks, and this can trigger
a BUG() in ext4_es_cache_extent().  As a easy-to-backport-fix, filter
out the EXT4_FC_REPLAY bit for now.  We should eventually transition
away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.

Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20220420192312.1655305-1-phind.uet@gmail.com
Link: https://lore.kernel.org/r/20220517174028.942119-1-tytso@mit.edu
Reported-by: syzbot+c7358a3cd05ee786eb31@syzkaller.appspotmail.com
2022-05-24 15:33:58 -04:00
Linus Torvalds
115cd47132 for-5.19/block-2022-05-22
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmKKrUsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpgDjD/44hY9h0JsOLoRH1IvFtuaH6n718JXuqG17
 hHCfmnAUVqj2jT00IUbVlUTd905bCGpfrodBL3PAmPev1zZHOUd/MnJKrSynJ+/s
 NJEMZQaHxLmocNDpJ1sZo7UbAFErsZXB0gVYUO8cH2bFYNu84H1mhRCOReYyqmvQ
 aIAASX5qRB/ciBQCivzAJl2jTdn4WOn5hWi9RLidQB7kSbaXGPmgKAuN88WI4H7A
 zQgAkEl2EEquyMI5tV1uquS7engJaC/4PsenF0S9iTyrhJLjneczJBJZKMLeMR8d
 sOm6sKJdpkrfYDyaA4PIkgmLoEGTtwGpqGHl4iXTyinUAxJoca5tmPvBb3wp66GE
 2Mr7pumxc1yJID2VHbsERXlOAX3aZNCowx2gum2MTRIO8g11Eu3aaVn2kv37MBJ2
 4R2a/cJFl5zj9M8536cG+Yqpy0DDVCCQKUIqEupgEu1dyfpznyWH5BTAHXi1E8td
 nxUin7uXdD0AJkaR0m04McjS/Bcmc1dc6I8xvkdUFYBqYCZWpKOTiEpIBlHg0XJA
 sxdngyz5lSYTGVA4o4QCrdR0Tx1n36A1IYFuQj0wzxBJYZ02jEZuII/A3dd+8hiv
 EY+VeUQeVIXFFuOcY+e0ScPpn7Nr17hAd1en/j2Hcoe4ZE8plqG2QTcnwgflcbis
 iomvJ4yk0Q==
 =0Rw1
 -----END PGP SIGNATURE-----

Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "Here are the core block changes for 5.19. This contains:

   - blk-throttle accounting fix (Laibin)

   - Series removing redundant assignments (Michal)

   - Expose bio cache via the bio_set, so that DM can use it (Mike)

   - Finish off the bio allocation interface cleanups by dealing with
     the weirdest member of the family. bio_kmalloc combines a kmalloc
     for the bio and bio_vecs with a hidden bio_init call and magic
     cleanup semantics (Christoph)

   - Clean up the block layer API so that APIs consumed by file systems
     are (almost) only struct block_device based, so that file systems
     don't have to poke into block layer internals like the
     request_queue (Christoph)

   - Clean up the blk_execute_rq* API (Christoph)

   - Clean up various lose end in the blk-cgroup code to make it easier
     to follow in preparation of reworking the blkcg assignment for bios
     (Christoph)

   - Fix use-after-free issues in BFQ when processes with merged queues
     get moved to different cgroups (Jan)

   - BFQ fixes (Jan)

   - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
     Wolfgang, me)"

* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
  blk-mq: fix typo in comment
  bfq: Remove bfq_requeue_request_body()
  bfq: Remove superfluous conversion from RQ_BIC()
  bfq: Allow current waker to defend against a tentative one
  bfq: Relax waker detection for shared queues
  blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
  blk-throttle: Set BIO_THROTTLED when bio has been throttled
  blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
  blk-cgroup: always terminate io.stat lines
  block, bfq: make bfq_has_work() more accurate
  block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
  block: cleanup the VM accounting in submit_bio
  block: Fix the bio.bi_opf comment
  block: reorder the REQ_ flags
  blk-iocost: combine local_stat and desc_stat to stat
  block: improve the error message from bio_check_eod
  block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
  block: remove superfluous calls to blkcg_bio_issue_init
  kthread: unexport kthread_blkcg
  blk-cgroup: cleanup blkcg_maybe_throttle_current
  ...
2022-05-23 13:56:39 -07:00
Ye Bin
ef09ed5d37 ext4: fix bug_on in ext4_writepages
we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS:  00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 do_writepages+0x130/0x3a0
 filemap_fdatawrite_wbc+0x83/0xa0
 filemap_flush+0xab/0xe0
 ext4_alloc_da_blocks+0x51/0x120
 __ext4_ioctl+0x1534/0x3210
 __x64_sys_ioctl+0x12c/0x170
 do_syscall_64+0x3b/0x90

It may happen as follows:
1. write inline_data inode
vfs_write
  new_sync_write
    ext4_file_write_iter
      ext4_buffered_write_iter
        generic_perform_write
          ext4_da_write_begin
            ext4_da_write_inline_data_begin -> If inline data size too
            small will allocate block to write, then mapping will has
            dirty page
                ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
  ioctl_preallocate
    vfs_fallocate
      ext4_fallocate
        ext4_convert_inline_data
          ext4_convert_inline_data_nolock
            ext4_map_blocks -> fail will goto restore data
            ext4_restore_inline_data
              ext4_create_inline_data
              ext4_write_inline_data
              ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
  ext4_alloc_da_blocks
    filemap_flush
      filemap_fdatawrite_wbc
        do_writepages
          ext4_writepages
            if (ext4_has_inline_data(inode))
              BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))

The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode.  But there maybe already
convert from inline to extent.  To solve this issue, we call
filemap_flush first..

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-21 22:24:24 -04:00
Ritesh Harjani
72f63f4a77 ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.

Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-21 22:24:24 -04:00
Ritesh Harjani
3030b59c85 ext4: cleanup function defs from ext4.h into crypto.c
Some of these functions when CONFIG_FS_ENCRYPTION is enabled are not
really inline (let compiler be the best judge of it).
Remove inline and move them into crypto.c where they should be present.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/b7b9de2c7226298663fb5a0c28909135e2ab220f.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-21 22:24:24 -04:00
Ritesh Harjani
b1241c8eb9 ext4: move ext4 crypto code to its own file crypto.c
This is to cleanup super.c file which has grown quite large.
So, start moving ext4 crypto related code to where it should
be in the first place i.e. fs/ext4/crypto.c

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/7d637e093cbc34d727397e8d41a53a1b9ca7d7a4.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-21 22:24:24 -04:00
Eric Biggers
c069db76ed ext4: fix memory leak in parse_apply_sb_mount_options()
If processing the on-disk mount options fails after any memory was
allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is
leaked.  Fix this by calling ext4_fc_free() instead of kfree() directly.

Reproducer:

    mkfs.ext4 -F /dev/vdc
    tune2fs /dev/vdc -E mount_opts=usrjquota=file
    echo clear > /sys/kernel/debug/kmemleak
    mount /dev/vdc /vdc
    echo scan > /sys/kernel/debug/kmemleak
    sleep 5
    echo scan > /sys/kernel/debug/kmemleak
    cat /sys/kernel/debug/kmemleak

Fixes: 7edfd85b1f ("ext4: Completely separate options parsing and sb setup")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220513231605.175121-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-18 11:24:22 -04:00
Eric Biggers
cb8435dc8b ext4: reject the 'commit' option on ext2 filesystems
The 'commit' option is only applicable for ext3 and ext4 filesystems,
and has never been accepted by the ext2 filesystem driver, so the ext4
driver shouldn't allow it on ext2 filesystems.

This fixes a failure in xfstest ext4/053.

Fixes: 8dc0aa8cf0 ("ext4: check incompatible mount options while mounting ext2/3")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220510183232.172615-1-ebiggers@kernel.org
2022-05-18 11:24:22 -04:00
Yang Li
b10b6278ae ext4: remove duplicated #include of dax.h in inode.c
Fix following includecheck warning:
./fs/ext4/inode.c: linux/dax.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220504225025.44753-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-18 11:24:22 -04:00
Baokun Li
f87c7a4b08 ext4: fix race condition between ext4_write and ext4_convert_inline_data
Hulk Robot reported a BUG_ON:
 ==================================================================
 EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
 block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
 kernel BUG at fs/ext4/ext4_jbd2.c:53!
 invalid opcode: 0000 [#1] SMP KASAN PTI
 CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
 RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
 RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
 [...]
 Call Trace:
  ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
  generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
  ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
  ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
  do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
  do_iter_write+0x107/0x430 fs/read_write.c:861
  vfs_writev fs/read_write.c:934 [inline]
  do_pwritev+0x1e5/0x380 fs/read_write.c:1031
 [...]
 ==================================================================

Above issue may happen as follows:
           cpu1                     cpu2
__________________________|__________________________
do_pwritev
 vfs_writev
  do_iter_write
   ext4_file_write_iter
    ext4_buffered_write_iter
     generic_perform_write
      ext4_da_write_begin
                           vfs_fallocate
                            ext4_fallocate
                             ext4_convert_inline_data
                              ext4_convert_inline_data_nolock
                               ext4_destroy_inline_data_nolock
                                clear EXT4_STATE_MAY_INLINE_DATA
                               ext4_map_blocks
                                ext4_ext_map_blocks
                                 ext4_mb_new_blocks
                                  ext4_mb_regular_allocator
                                   ext4_mb_good_group_nolock
                                    ext4_mb_init_group
                                     ext4_mb_init_cache
                                      ext4_mb_generate_buddy  --> error
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
                                ext4_restore_inline_data
                                 set EXT4_STATE_MAY_INLINE_DATA
       ext4_block_write_begin
      ext4_da_write_end
       ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
       ext4_write_inline_data_end
        handle=NULL
        ext4_journal_stop(handle)
         __ext4_journal_stop
          ext4_put_nojournal(handle)
           ref_cnt = (unsigned long)handle
           BUG_ON(ref_cnt == 0)  ---> BUG_ON

The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.

To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().

Fixes: 0c8d414f16 ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-05-17 14:17:40 -04:00