Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
In 801c6058d1 ("bpf: Fix leakage of uninitialized bpf stack under
speculation") we replaced masking logic with direct loads of immediates
if the register is a known constant. Given in this case we do not apply
any masking, there is also no reason for the operation to be truncated
under the speculative domain.
Therefore, there is also zero reason for the verifier to branch-off and
simulate this case, it only needs to do it for unknown but bounded scalars.
As a side-effect, this also enables few test cases that were previously
rejected due to simulation under zero truncation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Masking direction as indicated via mask_to_left is considered to be
calculated once and then used to derive pointer limits. Thus, this
needs to be placed into bpf_sanitize_info instead so we can pass it
to sanitize_ptr_alu() call after the pointer move. Piotr noticed a
corner case where the off reg causes masking direction change which
then results in an incorrect final aux->alu_limit.
Fixes: 7fedb63a83 ("bpf: Tighten speculative pointer arithmetic mask")
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add a container structure struct bpf_sanitize_info which holds
the current aux info, and update call-sites to sanitize_ptr_alu()
to pass it in. This is needed for passing in additional state
later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Similarly as 6bdacdb48e ("bpf: Fix BPF_JIT kconfig symbol dependency") we
need to detangle the hard BPF_LSM dependency on NET. This was previously
implicit by its dependency on BPF_JIT which itself was dependent on NET (but
without any actual/real hard dependency code-wise). Given the latter was
lifted, so should be the former as BPF_LSMs could well exist on net-less
systems. This therefore also fixes a randconfig build error recently reported
by Randy:
ld: kernel/bpf/bpf_lsm.o: in function `bpf_lsm_func_proto':
bpf_lsm.c:(.text+0x1a0): undefined reference to `bpf_sk_storage_get_proto'
ld: bpf_lsm.c:(.text+0x1b8): undefined reference to `bpf_sk_storage_delete_proto'
[...]
Fixes: b24abcff91 ("bpf, kconfig: Add consolidated menu entry for bpf with core options")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
-----BEGIN PGP SIGNATURE-----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=poNo
-----END PGP SIGNATURE-----
Merge tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs fixes from David Howells:
"A couple of fixes to the new netfs lib:
- Pass the AOP flags through from netfs_write_begin() into
grab_cache_page_write_begin().
- Automatically enable in Kconfig netfs lib rather than presenting an
option for manual enablement"
* tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual
netfs: Pass flags through to grab_cache_page_write_begin()
Add a test case for using bpf_skb_change_head() in combination with
bpf_redirect_peer() to redirect a packet from a L3 device to veth and back.
The test uses a BPF program that adds L2 headers to the packet coming
from a L3 device and then calls bpf_redirect_peer() to redirect the packet
to a veth device. The test fails as skb->mac_len is not set properly and
thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(),
causing tcp_v4_rcv() to point the TCP header into middle of the IP header.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com
The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.
Fixes: db94cc0b48 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
- Fix 'perf script' decoding of Intel PT traces for abort handling and
sample instruction bytes.
- Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
'perf script' decoder.
- Fixes for the python based Intel PT trace viewer GUI.
- Sync UAPI copies (unwire quotactl_path, some comment fixes).
- Fix handling of missing kernel software events, such as the recently
added 'cgroup-switches', and add the trivial glue for it in the
tooling side, since it was added in this merge window.
- Add missing initialization of zstd_data in 'perf buildid-list',
detected with valgrind's memcheck.
- Remove needless event enable/disable when all events uses BPF.
- Fix libpfm4 support (63) test error for nested event groups.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYKwENwAKCRCyPKLppCJ+
JxBWAP0UQ2Mm/STKDz4GpqJl1WsHF5oUUr8mFv+17ucyk4vdYgD/Xd5BaFNm6Y7E
/PgbNW9qze1ltWvHWGDpP/rFJfoNqg8=
=YzL3
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix 'perf script' decoding of Intel PT traces for abort handling and
sample instruction bytes.
- Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
'perf script' decoder.
- Fixes for the python based Intel PT trace viewer GUI.
- Sync UAPI copies (unwire quotactl_path, some comment fixes).
- Fix handling of missing kernel software events, such as the recently
added 'cgroup-switches', and add the trivial glue for it in the
tooling side, since it was added in this merge window.
- Add missing initialization of zstd_data in 'perf buildid-list',
detected with valgrind's memcheck.
- Remove needless event enable/disable when all events uses BPF.
- Fix libpfm4 support (63) test error for nested event groups.
* tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Skip evlist__[enable|disable] when all events uses BPF
perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit
perf scripts python: exported-sql-viewer.py: Fix warning display
perf scripts python: exported-sql-viewer.py: Fix Array TypeError
perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
tools headers UAPI: Sync files changed by the quotactl_path unwiring
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
perf parse-events: Check if the software events array slots are populated
perf tools: Add 'cgroup-switches' software event
perf intel-pt: Remove redundant setting of ptq->insn_len
perf intel-pt: Fix sample instruction bytes
perf intel-pt: Fix transaction abort handling
perf test: Fix libpfm4 support (63) test error for nested event groups
tools arch kvm: Sync kvm headers with the kernel sources
perf buildid-list: Initialize zstd_data
Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
Fixes: d0cad87170 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2e9f60932a ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
if (skb->mac_len < sizeof(struct hsr_ethhdr))
return -EINVAL;
mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.
Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.
Fixes: 2e9f60932a ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA driver
This series contains some minor fixes in the sja1105 driver:
- improved error handling in the probe path
- rejecting an invalid phy-mode specified in the device tree
- register access fix for SJA1105P/Q/R/S for the virtual links through
the dynamic reconfiguration interface
- handling 2 bridge VLANs where the second is supposed to overwrite the
first
- making sure that the lack of a pvid results in the actual dropping of
untagged traffic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When running this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1
We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:
port vlan ids
swp4 1 PVID
br0 1 PVID Egress Untagged
This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.
Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.
The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.
Fixes: ec5ae61076 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Fixes: 5899ee367a ("net: dsa: tag_8021q: add a context structure")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.
So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.
The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.
However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.
So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.
So what to do?
Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.
After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.
Fixes: ec5ae61076 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.
Fixes: 8aa9ebccae ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.
Fixes: 0a7bdbc23d ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.
Fixes: 4d7525085a ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Fixes: a68578c20a ("net: dsa: Make deferred_xmit private to sja1105")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the beginning of the sja1105_dynamic_config.c file there is a diagram
of the dynamic config interface layout:
packed_buf
|
V
+-----------------------------------------+------------------+
| ENTRY BUFFER | COMMAND BUFFER |
+-----------------------------------------+------------------+
<----------------------- packed_size ------------------------>
So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.
This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.
Fixes: 94f94d4acf ("net: dsa: sja1105: add static tables for virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify some fields of the USB descriptor to make sure the driver
could be used by the device.
Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.
BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com
Fixes: c2198943e3 ("r8152: search the configuration of vendor mode")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup fixes from Tejun Heo:
- "cgroup_disable=" boot param was being applied too late confusing
some subsystems. Fix it by moving application to __setup() time.
- Comment spelling fixes. Included here to lower the chance of trivial
future merge conflicts.
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix spelling mistakes
cgroup: disable controllers at parse time
Pull workqueue fix from Tejun Heo:
"One commit to fix spurious workqueue stall warnings across VM
suspensions"
* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
wq: handle VM suspension in stall detection
There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and fixes
for ordering issues on unregistration which have been exposed through
the wider usage of devm_.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCrawIACgkQJNaLcl1U
h9B9Tgf/Sro65sL9JFR5EOWK71ljtUjJWyee9a4IBX82w0Ue6XqamrDzOuu3Kv5N
WBSO29o48RRFnLaWPNp0o9dkp4dtTNViThoRe5nJCmcOHKRTgh7e09EpewZWRRdY
uHV9Ii7v+xa1VUahHErCt88gahDwxb0n15nik1cn0mABgUYF1uEMHlD+B67y7m3m
95c63egMs9NW+htft2iUp/LrTDUBbqkQjimgvvQoLPd0wIpeQ/HYPgcaAvJ0nCao
UFsCMLL/qsSxdSQnO6pyoYT8BflhJxYySSOysfpWJAS+AyXVP6WZ+pBjNHT2AmPb
PO/skY6gRxIVn+KD/u2U5k7Q3WkeSw==
=MIpe
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The dormant flag need to be updated from the preparation phase,
otherwise, two consecutive requests to dorm a table in the same batch
might try to remove the same hooks twice, resulting in the following
warning:
hook not found, pf 3 num 0
WARNING: CPU: 0 PID: 334 at net/netfilter/core.c:480 __nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480
Modules linked in:
CPU: 0 PID: 334 Comm: kworker/u4:5 Not tainted 5.12.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:__nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480
This patch is a partial revert of 0ce7cf4127 ("netfilter: nftables:
update table flags from the commit phase") to restore the previous
behaviour.
However, there is still another problem: A batch containing a series of
dorm-wakeup-dorm table and vice-versa also trigger the warning above
since hook unregistration happens from the preparation phase, while hook
registration occurs from the commit phase.
To fix this problem, this patch adds two internal flags to annotate the
original dormant flag status which are __NFT_TABLE_F_WAS_DORMANT and
__NFT_TABLE_F_WAS_AWAKEN, to restore it from the abort path.
The __NFT_TABLE_F_UPDATE bitmask allows to handle the dormant flag update
with one single transaction.
Reported-by: syzbot+7ad5cd1615f2d89c6e7e@syzkaller.appspotmail.com
Fixes: 0ce7cf4127 ("netfilter: nftables: update table flags from the commit phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/nfc/nfcmrvl follows this syntax, but the content
inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c
causes warning:
warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti says:
====================
two fixes for the fq_pie scheduler
- patch 1/2 restores the possibility to use 65536 flows with fq_pie,
preserving the fix for an endless loop in the control plane
- patch 2/2 fixes an OOB access that can be observed in the traffic
path of fq_pie scheduler, when the classification selects a flow
beyond the allocated space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
the following script:
# tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress matchall action skbedit priority 0x10002
# ping 192.0.2.2 -I eth0 -c2 -w1 -q
produces the following splat:
BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
Read of size 4 at addr ffff888171306924 by task ping/942
CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x92/0xc1
print_address_description.constprop.7+0x1a/0x150
kasan_report.cold.13+0x7f/0x111
fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
__dev_queue_xmit+0x1034/0x2b10
ip_finish_output2+0xc62/0x2120
__ip_finish_output+0x553/0xea0
ip_output+0x1ca/0x4d0
ip_send_skb+0x37/0xa0
raw_sendmsg+0x1c4b/0x2d00
sock_sendmsg+0xdb/0x110
__sys_sendto+0x1d7/0x2b0
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe69735c3eb
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89
RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb
RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003
RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260
R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0
Allocated by task 917:
kasan_save_stack+0x19/0x40
__kasan_kmalloc+0x7f/0xa0
__kmalloc_node+0x139/0x280
fq_pie_init+0x555/0x8e8 [sch_fq_pie]
qdisc_create+0x407/0x11b0
tc_modify_qdisc+0x3c2/0x17e0
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888171306800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 36 bytes to the right of
256-byte region [ffff888171306800, ffff888171306900)
The buggy address belongs to the page:
page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306
head:00000000bcfb624e order:1 compound_mapcount:0
flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a
valid flow: it's an address beyond the allocated memory.
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
CC: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
This reverts commit bb2f930d6d.
[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/
CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6d ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff7 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.
Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: 296c912075 ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Vinicius Costa Gomes as maintainer for these qdiscs.
These qdiscs are all TSN (Time Sensitive Networking) related.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as this
can cause malfunction when TOS is not supported.
- Allocate the LBR XSAVE buffers along with the DS buffers upfront because
allocating them when adding an event can deadlock.
-----BEGIN PGP SIGNATURE-----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=7WGT
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again.
- Don't leave the mutex WAITER bit stale when the last waiter is dropping
out early due to a signal as that forces all subsequent lock operations
needlessly into the slowpath until it's cleaned up again.
-----BEGIN PGP SIGNATURE-----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=7vqW
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails.
- Make the APPLE AIC chip driver depend on APPLE.
- Remove redundant error output on devm_ioremap_resource() failure.
-----BEGIN PGP SIGNATURE-----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=XjHi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
of killing the machine and by using the accessors with the exact functionality
needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in userspace
-----BEGIN PGP SIGNATURE-----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=51BK
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Fix breakage of strace (and other ptracers etc.) when using the new scv ABI (Power9 or
later with glibc >= 2.33).
Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to: Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, Christophe Leroy.
-----BEGIN PGP SIGNATURE-----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=qeQq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
userfaultfd: hugetlbfs: fix new flag usage in error path
lib: kunit: suppress a compilation warning of frame size
proc: remove Alexey from MAINTAINERS
linux/bits.h: fix compilation error with GENMASK
watchdog: reliable handling of timestamps
kasan: slab: always reset the tag in get_freepointer_safe()
tools/testing/selftests/exec: fix link error
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Revert "mm/gup: check page posion status for coredump."
mm/shuffle: fix section mismatch warning
In commit d6995da311 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve. Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.
Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation. Specifically, this would be the
result of an unlikely copy_huge_page_from_user error. There is not an
increased chance of hitting the VM_BUG_ON.
Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da311 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.
Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
