Commit graph

97 commits

Author SHA1 Message Date
Jeff Brown
9fb0f14e31 Input: evdev - indicate buffer overrun with SYN_DROPPED
Add a new EV_SYN code, SYN_DROPPED, to inform the client when input
events have been dropped from the evdev input buffer due to a
buffer overrun.  The client should use this event as a hint to
reset its state or ignore all following events until the next
packet begins.

Signed-off-by: Jeff Brown <jeffbrown@android.com>
[dtor@mail.ru: Implement Henrik's suggestion and drop old events in
 case of overflow.]
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:35:24 -07:00
Peter Korsgaard
439581ec07 Input: evdev - fix evdev_write return value on partial writes
As was recently brought up on the busybox list
(http://lists.busybox.net/pipermail/busybox/2011-January/074565.html),
evdev_write doesn't properly check the count argument, which will
lead to a return value > count on partial writes if the remaining bytes
are accessible - causing userspace confusion.

Fix it by only handling each full input_event structure and return -EINVAL
if less than 1 struct was written, similar to how it is done in evdev_read.

Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-27 01:52:53 -08:00
Dmitry Torokhov
554738da71 Merge branch 'next' into for-linus
Conflicts:
	include/linux/input.h
2011-01-06 22:34:59 -08:00
Dmitry Torokhov
5c461b913a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt into next 2010-12-27 17:33:20 -08:00
Henrik Rydberg
85b7720039 Input: introduce device properties
Today, userspace sets up an input device based on the data it emits.
This is not always enough; a tablet and a touchscreen may emit exactly
the same data, for instance, but the former should be set up with a
pointer whereas the latter does not need to. Recently, a new type of
touchpad has emerged where the buttons are under the pad, which
changes logic without changing the emitted data. This patch introduces
a new ioctl, EVIOCGPROP, which enables user access to a set of device
properties useful during setup. The properties are given as a bitmap
in the same fashion as the event types, and are also made available
via sysfs, uevent and /proc/bus/input/devices.

Acked-by: Ping Cheng <pingc@wacom.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-20 09:37:33 +01:00
Dmitry Torokhov
ab4e019219 Input: define separate EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2
The desire to keep old names for the EVIOCGKEYCODE/EVIOCSKEYCODE while
extending them to support large scancodes was a mistake. While we tried
to keep ABI intact (and we succeeded in doing that, programs compiled
on older kernels will work on newer ones) there is still a problem with
recompiling existing software with newer kernel headers.

New kernel headers will supply updated ioctl numbers and kernel will
expect that userspace will use struct input_keymap_entry to set and
retrieve keymap data. But since the names of ioctls are still the same
userspace will happily compile even if not adjusted to make use of the
new structure and will start miraculously fail in the field.

To avoid this issue let's revert EVIOCGKEYCODE/EVIOCSKEYCODE definitions
and add EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 so that userspace can explicitly
select the style of ioctls it wants to employ.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-14 23:55:21 -08:00
Joe Perches
da0c490115 Input: use pr_fmt and pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30 23:10:26 -08:00
Linus Torvalds
3a99c63190 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...
2010-10-25 07:59:01 -07:00
Dmitry Torokhov
49327ad2bb Merge branch 'next' into for-linus 2010-10-24 22:11:17 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds
888a6f77e0 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits)
  sched: fix RCU lockdep splat from task_group()
  rcu: using ACCESS_ONCE() to observe the jiffies_stall/rnp->qsmask value
  sched: suppress RCU lockdep splat in task_fork_fair
  net: suppress RCU lockdep false positive in sock_update_classid
  rcu: move check from rcu_dereference_bh to rcu_read_lock_bh_held
  rcu: Add advice to PROVE_RCU_REPEATEDLY kernel config parameter
  rcu: Add tracing data to support queueing models
  rcu: fix sparse errors in rcutorture.c
  rcu: only one evaluation of arg in rcu_dereference_check() unless sparse
  kernel: Remove undead ifdef CONFIG_DEBUG_LOCK_ALLOC
  rcu: fix _oddness handling of verbose stall warnings
  rcu: performance fixes to TINY_PREEMPT_RCU callback checking
  rcu: upgrade stallwarn.txt documentation for CPU-bound RT processes
  vhost: add __rcu annotations
  rcu: add comment stating that list_empty() applies to RCU-protected lists
  rcu: apply TINY_PREEMPT_RCU read-side speedup to TREE_PREEMPT_RCU
  rcu: combine duplicate code, courtesy of CONFIG_PREEMPT_RCU
  rcu: Upgrade srcu_read_lock() docbook about SRCU grace periods
  rcu: document ways of stalling updates in low-memory situations
  rcu: repair code-duplication FIXMEs
  ...
2010-10-21 12:54:12 -07:00
Daniel Mack
f9ce6eb5b6 Input: evdev - fix EVIOCSABS regression
448cd16 ("Input: evdev - rearrange ioctl handling") broke EVIOCSABS by
checking for the wrong direction bit.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Tested-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18 08:45:08 -07:00
Daniel Mack
0a74a1df3c Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABS
This fixes a regression introduced by the dynamic allocation of absinfo
for input devices. We need to bail out early for input devices which
don't have absolute axis.

[  929.664303] Pid: 2989, comm: input Not tainted 2.6.36-rc8+ #14 MS-7260/MS-7260
[  929.664318] EIP: 0060:[<c12bdc01>] EFLAGS: 00010246 CPU: 0
[  929.664331] EIP is at evdev_ioctl+0x4f8/0x59f
[  929.664341] EAX: 00000040 EBX: 00000000 ECX: 00000006 EDX: f45a1efc
[  929.664355] ESI: 00000000 EDI: f45a1efc EBP: f45a1f24 ESP: f45a1eb8
[  929.664369]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  929.664402]  f470da74 f6a30e78 f462c240 00000018 bfe4a260 00000000 f45b06fc 00000000
[  929.664429] <0> 000000c4 b769d000 c3544620 f470da74 f45b06fc f45b06fc f45a1f38 c107dd1f
[  929.664458] <0> f4710b74 000000c4 00000000 00000000 00000000 0000029d 00000a74 f4710b74
[  929.664500]  [<c107dd1f>] ? handle_mm_fault+0x2be/0x59a
[  929.664513]  [<c12bd709>] ? evdev_ioctl+0x0/0x59f
[  929.664524]  [<c1099d30>] ? do_vfs_ioctl+0x494/0x4d9
[  929.664538]  [<c10432a1>] ? up_read+0x16/0x29
[  929.664550]  [<c101c818>] ? do_page_fault+0x2ff/0x32d
[  929.664564]  [<c108d048>] ? do_sys_open+0xc5/0xcf
[  929.664575]  [<c1099db6>] ? sys_ioctl+0x41/0x61
[  929.664587]  [<c1002710>] ? sysenter_do_call+0x12/0x36
[  929.684570] ---[ end trace 11b83e923bd8f2bb ]---

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18 08:45:02 -07:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Mauro Carvalho Chehab
8613e4c287 Input: add support for large scancodes
Several devices use a high number of bits for scancodes. One important
group is the Remote Controllers. Some new protocols like RC-6 define a
scancode space of 64 bits.

The current EVIO[CS]GKEYCODE ioctls allow replace the scancode/keycode
translation tables, but it is limited to up to 32 bits for scancode.

Also, if userspace wants to clean the existing table, replacing it by
a new one, it needs to run a loop calling the ioctls over the entire
sparse scancode space.

To solve those problems, this patch extends the ioctls to allow drivers
handle scancodes up to 32 bytes long (the length could be extended in
the future should such need arise) and allow userspace to query and set
scancode to keycode mappings not only by scancode but also by index.

Compatibility code were also added to handle the old format of
EVIO[CS]GKEYCODE ioctls.

Folded fixes by:
- Dan Carpenter: locking fixes for the original implementation
- Jarod Wilson: fix crash when setting keycode and wiring up get/set
                handlers in original implementation.
- Dmitry Torokhov: rework to consolidate old and new scancode handling,
                   provide options to act either by index or scancode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-09 22:00:50 -07:00
Arnd Bergmann
2be8527928 input: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Dmitry Torokhov
448cd1664a Input: evdev - rearrange ioctl handling
Split ioctl handling into 3 separate sections: fixed-length ioctls,
variable-length ioctls and multi-number variable length handlers.
This reduces identation and makes the code a bit clearer.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02 20:30:44 -07:00
Daniel Mack
d31b2865a4 Input: dynamically allocate ABS information
As all callers are now changed to only use the input_abs_*() access
helpers, switching over to dynamically allocated ABS information is
easy. This reduces size of struct input_dev from 3152 to 1640 on
64 bit architectures.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02 20:30:04 -07:00
Daniel Mack
987a6c0298 Input: switch to input_abs_*() access functions
Change all call sites in drivers/input to not access the ABS axis
information directly anymore. Make them use the access helpers instead.

Also use input_set_abs_params() when possible.
Did some code refactoring as I was on it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02 20:29:56 -07:00
Dmitry Torokhov
c18fb1396e Input: evdev - signal that device is writable in evdev_poll()
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15 23:53:00 -07:00
Dmitry Torokhov
20da92de8e Input: change input handlers to use bool when possible
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15 23:52:33 -07:00
Henrik Rydberg
40d007e7df Input: introduce MT event slots
With the rapidly increasing number of intelligent multi-contact and
multi-user devices, the need to send digested, filtered information
from a set of different sources within the same device is imminent.
This patch adds the concept of slots to the MT protocol. The slots
enumerate a set of identified sources, such that all MT events
can be passed independently and selectively per identified source.

The protocol works like this: Instead of sending a SYN_MT_REPORT
event immediately after the contact data, one sends an ABS_MT_SLOT
event immediately before the contact data. The input core will only
emit events for slots with modified MT events. It is assumed that
the same slot is used for the duration of an initiated contact.

Acked-by: Ping Cheng <pingc@wacom.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15 23:52:03 -07:00
Henrik Rydberg
e725a4945d Input: evdev - never leave the client buffer empty after write
When the client buffer is very small and wraps around a lot, it may
well be that a write increases the head such that head == tail. If
this happens between the point where a poll is triggered and the
actual data is being read, there will be no data to read. This is
confusing to applications, which might end up closing the file.

This patch solves the problem by making sure the client buffer is
never empty after writing to it.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23 13:05:27 -07:00
Henrik Rydberg
63a6404d8a Input: evdev - use driver hint to compute size of event buffer
Some devices, in particular MT devices, produce a lot of data.  This
may lead to overflowing of the event queues in evdev driver, which
by default are fairly small. Let the drivers hint the average number
of events per packet generated by the device, and use that information
when computing the buffer size evdev should use for the device.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23 13:05:25 -07:00
Henrik Rydberg
b58f7086d5 Input: evdev - convert to dynamic event buffer
Allocate the event buffer dynamically, and prepare to compute the
buffer size in a separate function. This patch defines the size
computation to be identical to the current code, and does not contain
any logical changes.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23 13:04:42 -07:00
Dmitry Torokhov
58b939959d Input: scancode in get/set_keycodes should be unsigned
The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.

Acked-by: Márton Németh <nm127@freemail.hu>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-08 23:19:15 -08:00
Dmitry Torokhov
3d7bbd4575 Input: mark input interfaces as non-seekable
Seeking does not make sense for input interfaces such as evdev and joydev
so let's use nonseekable_open to mark them non-seekable.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04 00:31:44 -08:00
Adam Jackson
30a589fde0 Input: evdev - be less aggressive about sending SIGIO notifies
When using realtime signals, we'll enqueue one signal for every event.
This is unfortunate, because (for example) keyboard presses are three
events: key, msc scancode, and syn.  They'll be enqueued fast enough in
kernel space that all three events will be ready to read by the time
userspace runs, so the first invocation of the signal handler will read
all three events, but then the second two invocations still have to run
to do no work.

Instead, only send the SIGIO notification on syn events.  This is a
slight abuse of SIGIO semantics, in principle it ought to fire as soon
as any events are readable.  But it matches evdev semantics, which is
more important since SIGIO is rather vaguely defined to begin with.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06 00:17:04 -08:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Daniel Mack
f936601471 Input: fix EVIOCGNAME/JSIOCGNAME regression
Commit 3d5cb60e ("Input: simplify name handling for certain input
handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME
ioctl.

Before this, patch, the platform device's name was given back to
userspace which was good to identify devices. After this patch, the
device is ("event%d", minor) which is not descriptive at all.

This fixes the behaviour by taking dev->name.

Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-13 22:24:29 -07:00
Tero Saarni
ec20a022aa Input: synaptics - add support for reporting x/y resolution
Synaptics uses anisotropic coordinate system.  On some wide touchpads
vertical resolution can be twice as high as horizontal which causes
unequal sensitivity on x/y directions.  Add support for reading the
resolution with EVIOCGABS ioctl.

Signed-off-by: Tero Saarni <tero.saarni@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19 22:55:17 -07:00
Thadeu Lima de Souza Cascardo
3d5cb60ef3 Input: simplify name handling for certain input handles
For evdev, joydev and mousedev, instead of having a separate character array
holding name of the handle, use struct devce's name which is the same.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 00:11:43 -07:00
Jonathan Corbet
60aa49243d Rationalize fasync return values
Most fasync implementations do something like:

     return fasync_helper(...);

But fasync_helper() will return a positive value at times - a feature used
in at least one place.  Thus, a number of other drivers do:

     err = fasync_helper(...);
     if (err < 0)
             return err;
     return 0;

In the interests of consistency and more concise code, it makes sense to
map positive return values onto zero where ->fasync() is called.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-03-16 08:34:35 -06:00
Dmitry Torokhov
93b8eef1c0 Merge commit 'v2.6.28-rc9' into next 2008-12-20 04:54:54 -05:00
Al Viro
233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Kay Sievers
a6c2490f01 Input: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-10-30 09:29:05 -04:00
Philip Langdale
2d56f3a32c Input: refactor evdev 32bit compat to be shareable with uinput
Currently, evdev has working 32bit compatibility and uinput does not. uinput
needs the input_event code that evdev uses, so let's refactor it so it can
be shared.

[dtor@mail.ru: add fix for force feedback compat issues]
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-10-27 22:03:42 -04:00
Geert Uytterhoeven
c85e2031eb Input: evdev - fix printf() format for sizeof
commit f2afa7711f ("Input: paper over a bug in
Synaptics X driver") introduced a compiler warning on 64-bit platforms, as
sizeof() returns a size_t, not an (unsigned) int:

| drivers/input/evdev.c: In function 'handle_eviocgbit':
| drivers/input/evdev.c:684: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Use the proper `z' modifier for size_t, and make the printf() formats for the
sizes unsigned while we're at it.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-19 11:35:27 -04:00
Dmitry Torokhov
f2afa7711f Input: paper over a bug in Synaptics X driver
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08 14:54:59 -04:00
Linus Torvalds
5402a7349d Input: evdev - split EVIOCGBIT handlig into a separate function
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08 11:54:58 -04:00
Adam Dawidowski
f2278f31d6 Input: fix force feedback upload issue in compat mode
Force feedback upload of effects through the event device (ioctl
EVIOCSFF) is not working in 32 bit applications running on 64-bit
kernel due to the fact that struct ff_effect contains a pointer,
resulting in the structure having different sizes in 64 and 32 bit
programs and causing difference in ioctl numbers.

[dtor@mail.ru: refactor to keep all ugliness in evdev]

Signed-off-by: Adam Dawidowski <drake_ster@wp.pl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30 09:37:06 -04:00
Dmitry Torokhov
a7097ff89c Input: make sure input interfaces pin parent input devices
Recent driver core change causes references to parent devices being
dropped early, at device_del() time, as opposed to when all children
are freed. This causes oops in evdev with grabbed devices. Take the
reference to the parent input device ourselves to ensure that it
stays around long enough.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-01 00:22:53 -04:00
Björn Steinbrink
eb08b6b973 evdev: Release eventual input device grabs when getting disconnected
When getting disconnected we need to release eventual grabs on the
underlying input device as we also release the input device itself.
Otherwise, we would try to release the grab when the client that
requested it closes its handle, accessing the input device which
might already be freed.

Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30 14:47:49 -07:00
Dmitry Torokhov
f4f37c8ec7 Input: Add proper locking when changing device's keymap
Take dev->event_lock to make sure that we don't race with input_event() and
also force key up event when removing a key from keymap table.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21 01:11:06 -05:00
Jiri Slaby
7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
Dmitry Torokhov
82ba56c273 Input: use full RCU API
RT guys alerted me to the fact that in their tree spinlocks
are preemptible and it is better to use full RCU API
(rcu_read_lock()/rcu_read_unlock()) to be safe.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-13 15:46:55 -04:00
Dmitry Torokhov
b981d8b3f5 Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/macintosh/adbhid.c
2007-10-12 21:27:47 -04:00
Oliver Neukum
064450140f Input: fix open count handling in input interfaces
If input_open_device() fails we should not leave interfaces marked
as  opened.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12 14:18:40 -04:00
Dmitry Torokhov
6addb1d6de Input: evdev - implement proper locking
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-08-30 00:22:18 -04:00
Ralf Baechle
293c5bd13f [MIPS] Fixup secure computing stuff.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:21 +01:00