commit e3d4ead4d4 upstream.
Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 372fa0c79d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move psr_init_dpcd() from init-connector to connector-detect
function. The dpcd probe for checking panel replay capability
for external dp connector is causing delay during boot which can
be optimized by moving dpcd probe to connector specific detect().
v1: Initial version.
v2: Add details in commit description. [Jani]
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10284
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Fixes: cceeaa312d ("drm/i915/panelreplay: Enable panel replay dpcd initialization for DP")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229043716.4065760-1-animesh.manna@intel.com
(cherry picked from commit 1cca19bf29)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.
I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.
As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.
Cc: stable@vger.kernel.org
Fixes: 783d8b8087 ("drm/i915/psr: Re-enable PSR1 on hsw/bdw")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 94501c3ca6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
(cherry picked from commit 9b0b61c5bc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we are enabling selective fetch for all planes that are visible.
This is suboptimal as we might be fetching for memory for planes that are
not part of selective update.
Fix this by adding proper handling for disabling plane selective fetch:
If plane previously part of selective update is now not part of update:
Add it into updated planes and let the plane configuration to disable
selective fetch for it.
v3: Checkpatch warnings fixed
v2:
- Add setting sel_fetch_area->y1/y2 to -1
- Remove setting again local sel_fetch_area variable
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-3-jouni.hogander@intel.com
Currently selective fetch configuration for planes is implemented in psr
code. More suitable place for this code is where everything else is
configured for planes -> move it into skl_universal_plane.c and
intel_cursor.c. This also allows us to drop hooks for cursor handling.
v3: Checkpatch warnings fixed
v2: Removed setting sel_fetch_area->y1/y2 as -1
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-2-jouni.hogander@intel.com
entry_setup_frames variable is defined as u8. However, the
function call intel_psr_entry_setup_frames() can return
negative error code. There is a type mismatch here, so let's
switch to use int here as well.
Fixes: 2b981d57e4 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116090512.480373-1-mika.kahola@intel.com
Add debugfs support which will print source and sink status
per connector basis. Existing i915_psr_status and
i915_psr_sink_status will be used to get the source and
sink status of panel replay.
v1: Initial version. [rb-ed by Arun]
v2: Added check for DP 2.0 and connector type in connector_debugfs_add().
v3: Optimization and cosmetic changes. [Jouni]
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-7-animesh.manna@intel.com
At least one TGL had regression when using u8 types
for entry setup frames calculation. So, let's switch
to use ints instead.
intel_psr_entry_setup_frames() function expects
to return u8 but since in case of error the error
code -ETIME is returned. This doesn't fit into u8
and hence the return value is not as expected.
Fixes: 2b981d57e4 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113093737.358137-1-mika.kahola@intel.com
TRANS_DP2_CTL register is programmed to enable panel replay from source
and sink is enabled through panel replay dpcd configuration address.
Bspec: 1407940617
v1: Initial version.
v2:
- Use pr_* flags instead psr_* flags. [Jouni]
- Remove intel_dp_is_edp check as edp1.5 also has panel replay. [Jouni]
v3: Cover letter updated and selective fetch condition check is added
before updating its bit in PSR2_MAN_TRK_CTL register. [Jouni]
v4: Selective fetch related PSR2_MAN_TRK_CTL programmming dropped. [Jouni]
v5: Added PSR2_MAN_TRK_CTL programming as needed for Continuous Full
Frame (CFF) update.
v6: Rebased on latest.
Note: Initial plan is to enable panel replay in full-screen live active
frame update mode. In a incremental approach panel replay will be enabled
in selctive update mode if there is any gap in curent implementation.
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-6-animesh.manna@intel.com
Due to similarity panel replay dpcd initialization got added in psr
function which is specific for edp panel. This patch enables panel
replay initialization for dp connector.
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-5-animesh.manna@intel.com
Modify existing PSR implementation to enable panel replay feature of DP 2.0
which is similar to PSR feature of EDP panel. There is different DPCD
address to check panel capability compare to PSR and vsc sdp header
is different.
v1: Initial version.
v2:
- Set source_panel_replay_support flag under HAS_PANEL_REPLAY()
condition check. [Jouni]
- Code restructured around intel_panel_replay_init
and renamed to intel_panel_replay_init_dpcd. [Jouni]
- Remove the initial code modification around has_psr2 flag. [Jouni]
- Add CAN_PANEL_REPLAY() in intel_encoder_can_psr which is used to
enable in intel_psr_post_plane_update. [Jouni]
v3:
- Initialize both psr and panel-replay. [Jouni]
- Initialize both panel replay and psr if detected. [Jouni]
- Refactoring psr function by introducing _psr_compute_config(). [Jouni]
- Add check for !is_edp while deriving source_panel_replay_support. [Jouni]
- Enable panel replay dpcd initialization in a separate patch. [Jouni]
v4:
- HAS_PANEL_REPLAY() check not needed during sink capability check. [Jouni]
- Set either panel replay source support or psr. [Jouni]
v5:
- HAS_PANEL_REPLAY() removed and use HAS_DP20() instead. [Jouni]
- Move psr related code to intel_psr.c. [Jani]
- Reset sink_panel_replay_support flag during disconnection. [Jani]
v6: return statement restored which is removed by misatke. [Jouni]
v7: cosmetic changes. [Arun]
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-4-animesh.manna@intel.com
This patch is preparing adding panel replay specific dpcd init.
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-3-animesh.manna@intel.com
Display driver shall read DPCD 00071h[3:1] during configuration
to get PSR setup time. This register provides the setup time
requirement on the VSC SDP entry packet. If setup time cannot be
met with the current timings
(e.g., PSR setup time + other blanking requirements > blanking time),
driver should enable sending VSC SDP one frame earlier before sending
the capture frame.
BSpec: 69895 (PSR Entry Setup Frames 17:16)
v2: Write frames before su entry to correct register (Ville, Jouni)
Move frames before su entry calculation to it's
own function (Ville, Jouni)
Rename PSR Entry Setup Frames register to indicate
Lunarlake specificity (Jouni)
v3: Modify setup entry frames calculation function to
return the actual frames (Ville)
Match comment with actual implementation (Jouni)
v4: Drop "set" from function naming (Jouni, Ville)
Use i915 instead of dev_priv (Jouni)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106114228.146574-1-mika.kahola@intel.com
Move psr related module parameters under display. Also fix error in
enable_psr2_sel_fetch module parameter descrtiption. It was saying disabled
by default while it's vice versa. Also psr_safest_params was missing
default value in description. This is now added.
v2:
- Fix enable_psr2_sel_fetch description.
- Add default value into psr_safest_params description.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-5-jouni.hogander@intel.com
Watchdog timers for Lunarlake HW were removed for PSR/PSR2
The patch removes the use of these timers from the driver code.
BSpec: 69895
v2: Reword commit message (Ville)
Drop HPD mask from LNL (Ville)
Revise masking logic (Jouni)
v3: Revise commit message (Ville)
Revert HPD mask removal as irrelevant for this patch (Ville)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010095233.590613-1-mika.kahola@intel.com
intel_psr_pre_plane_update() operates on a per-crtc level, whereas
intel_psr_post_plane_update() operates on the whole atomic commit,
for no real reason that I can see. Adjust intel_psr_post_plane_update()
to match the intel_psr_pre_plane_update() approach.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Normally PSR errors detected by the panel are triggering HPD interrupt and
seen as error in dmesg. Some panels are not triggering the interrupt even
it is requested and they are detecting error. Due to this it would be good
to have possibility to check panel detected errors. Add PSR error status
into PSR sink status debugfs interface.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828083107.1520501-1-jouni.hogander@intel.com
We are planning to move flush performed from work queue. This
means it is possible to have invalidate -> flip -> flush sequence.
Handle this by clearing possible busy bits on flip.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901093500.3463046-3-jouni.hogander@intel.com
Split out frontbuffer related declarations and static inlines from
gem/i915_gem_object.h into new gem/i915_gem_object_frontbuffer.h.
The main goal is to reduce header interdependencies. With
gem/i915_gem_object.h including display/intel_frontbuffer.h,
modification of the latter causes a whopping 300+ objects to be rebuilt,
while many of the source files actually needing it aren't explicitly
including it at all.
After the change, only 21 objects depend on display/intel_frontbuffer.h,
directly or indirectly.
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230830085127.2416842-1-jani.nikula@intel.com
Stepping-specific display behavior shouldn't be tied to MTL as a
platform, but rather specifically to the Xe_LPD+ IP. Future non-MTL
platforms may re-use this IP and will need to follow the exact same
logic and apply the same workarounds. IS_MTL_DISPLAY_STEP() is dropped
in favor of a new macro IS_DISPLAY_IP_STEP() that only checks the
display IP version.
v2:
- Rename macro to IS_DISPLAY_IP_STEP for consistency with the
corresponding GT macro and handle steppings the same way.
v3:
- Drop the automatic "STEP_" pasting.
v4:
- Implement IS_DISPLAY_IP_STEP on top of IS_DISPLAY_IP_RANGE /
IS_DISPLAY_STEP building blocks and make the parameters from/until
instead of begin/fixed. (Jani)
- Fix usage details in comment.
v5:
- Tweak macro comment. (Gustavo)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-17-matthew.d.roper@intel.com
Driver refers to the platform Alderlake P as ADLP in places
and ALDERLAKE_P in some. Making the consistent change
to avoid confusion of the right naming convention for
the platform.
v2:
- Unrolled wrapper IS_ADLP_GRAPHICS_STEP and Replace
- Added IS_ALDERLAKE_P() && IS_GRAPHICS_STEP() (Jani/Tvrtko).
v3:
- Removed unused macros of display steps.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-11-dnyaneshwar.bhadane@intel.com
Encoder compute config is changing hw.adjusted mode. Uapi.adjusted mode
doesn't get updated before psr compute config gets called. This causes io
and fast wake line calculation using adjusted mode containing values before
encoder adjustments. Fix this by using hw.adjusted mode instead of
uapi.adjusted mode.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Fixes: cb42e8ede5 ("drm/i915/psr: Use calculated io and fast wake lines")
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620111745.2870706-1-jouni.hogander@intel.com
hsw/bdw lack the pipe register vs. display register distinction
in their PSR masking capabilities. So to keep our CURSURFLIVE
tricks working we need to just unmask all display register writes
on these platforms. The downside being that any display regitster
(eg. even SWF regs) will cause a PSR exit.
Note that WaMaskMMIOWriteForPSR asks us to mask this on bdw, but
that won't work since we need those CURSURFLIVE tricks. Observations
on actual hardware show that this causes one extra PSR exit ~every
10 seconds, which is pretty much irrelevant. I suspect this is
due to the pcode poking at IPS_CTL. Disabling IPS does not stop it
however, so either I'm wrong or pcode pokes at the register
regardless of whether it's actually trying to enable/disable IPS.
Also when the machine is busy (eg. just running 'find /') these
extra PSR exits cease, which again points at pcode or some other
PM entity as being the culprit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-11-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reintroduce the special PSR AUX CH setup for hsw/bdw. Not all
of it was even removed (BDW AUX data registers were left behind).
Update the code to use REG_BIT() & co. while at it.
v2: Define the SRD_AUX_CTL bits in terms of DP_AUX_CTL bits (Jouni)
Add a comment explaining the hand rolled DPCD write (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
In preparation for re-introducing HSW's different PSR1 register
offeets let's just wrap all the registers into functions.
Avoids having to make the register macros more complex.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
In order to avoid flush_scheduled_work() usage, add a dedicated
workqueue in the drm_i915_private structure. In this way, we don't
need to use the system queue anymore.
This change is mostly mechanical and based on Tetsuo's original
patch[1].
v6 by Jani:
- Also create unordered_wq for mock device
Link: https://patchwork.freedesktop.org/series/114608/ [1]
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com
Reduce the 'intel_dp' stuff a bit by introducing local
cpu_transcoder variables.
Ideally I'd like the whole PSR code to stop using intel_dp
except during a full modeset, but dunno yet if that's
possible. But the less 'intel_dp' we have sprad around
the easier that should be to figure out eventually.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
The fact that DC states reset the PSR perofrmance counter
is no reason not to include it in the debug output.
But let's keep the comment there to remind people about
that caveat.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-8-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Define more of the PSR mask bits, and describe in detail
what some of them do. Even if we don't set them all from
the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun, and re-reverse engineering the behaviour every
time is time consuming (even if a bit more fun than spec
trawling).
v2: Moar bits
Put the description into a comment to be easily available
v2: Fix the BDW_UNMASK_VBL_TO_REGS_IN_SRD/HSW_UNMASK_VBL_TO_REGS_IN_SRD
description
Rebase due to intel_psr_regs.h
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411191429.29895-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
If we have to force the hardware to go through a full modeset
due to eg. cdclk reprogramming, we need to preserve
crtc_state->inherited for all crtcs that have not otherwise
gone through the whole compute_config() stuff after connectors
have been detected.
Otherwise eg. cdclk induced modeset glk_force_audio_cdclk()
will clear the inherited flag, and thus the first real commit
coming from userspace later on will not be forced through
the full .compute_config() path and so eg. audio state may
not get properly recomputed.
But instead of adding all kinds of ad-hoc crtc_state->inherited
preservation hacks all over, let's change things so that we
only clear it for the crtcs directly included in userspace/client
initiated commits.
Should be far less fragile since now we just need to remember
to flag the internal commits, and not worry about where new
crtcs might get pulled in.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5260
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328122357.1697-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Ensure vblank >= psr2 vblank
where
Psr2 vblank = PSR2_CTL Block Count Number maximum line count.
Bspec: 71580, 49274
v2: Use calculated block count number maximum line count
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-6-jouni.hogander@intel.com
PSR WM optimization should be disabled based on any wm level being
disabled. Also same WA should be applied for ICL as well.
Bspec: 71580
v5:
- Set in pre plane hook and clear in post plane hook
v4:
- Handle mode change in psr enable/disable
- Handle wm_level_disable changes separately in pre plane hook
v3:
- Split patch
v2:
- set/clear chicken bit in post_plane_update
- apply for ICL as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-4-jouni.hogander@intel.com
Wa_16013835468 is a separate from Wa_14015648006 and needs to be
applied for display version 12. Fix this by removing all the
references to Wa_14015648006 and apply Wa_16013835468 according to
Bspec.
Also move workaround into separate function as a preparation for
Wa_14015648006 implementation.
Bspec: 55378
v3:
- apply for display version 12 only
v2:
- keep applying the wa in intel_psr_enable_source
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-3-jouni.hogander@intel.com
Ville Syrjälä