Currently, the driver unregisters the IRQs when the rtc character device is
closed. This means that the device needs to stay open to get alarms while
the usual use case will open the device, set the alarm and close the
device.
Move the IRQ requests to sa1100_rtc_probe() and use the devm managed
versions so we don't need to free them.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In the error path of sa1100_rtc_open(), info->clk is disabled which will
happen again in sa1100_rtc_remove() when the module is removed whereas it
is only enabled once in sa1100_rtc_init().
Fixes: 0cc0c38e91 ("drivers/rtc/rtc-sa1100.c: move clock enable/disable to probe/remove")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
pxa_rtc_open() registers the interrupt handler which will access the RTC
registers. However, pxa_rtc_open() is called before the register range is
ioremapped. Instead, call it after devm_ioremap().
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The last remaining sysfs attribute is undocumented and useless as it can
only be used to debug the driver. Remove it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Don't require an IRQ if the wakeup-source device-tree property is present.
Signed-off-by: Eric Cooper <ecc@cmu.edu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Currently, the driver unregisters the IRQs when the rtc character device is
closed. This means that the device needs to stay open to get alarms while
the usual use case will open the device, set the alarm and close the
device.
Move the IRQ requests to puv3_rtc_probe() and use the devm managed versions
so we don't need to free them.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b53 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The check on ret < 0 is redundant as the goto destination is the
next statment. Remove this redudant check and goto.
Detected by CoverityScan, CID#1268785 ("Identical code for different
branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
There are two error return paths that do not kfree clk_data and
we end up with a memory leak. Fix these with a kfree error exit
path.
Detected by CoverityScan, CID#1402959 ("Resource Leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit 8b44f5be20 ("ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property")
removed the last usage of "isil,irq2-can-wakeup-machine" almost
two years ago. So I think we can get rid of supporting this
legacy binding.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
If RTC time have been altered by low voltage, we notify users
that RTC time is invalid by returning -EINVAL.
The RTC time needs to be set correctly to clear the invalid flag.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subsystem:
- expose non volatile RAM using nvmem instead of open coding in many
drivers. Unfortunately, this option has to be enabled by default to not
break existing users.
- rtctest can now test for cutoff dates, showing when an RTC will start
failing to properly save time and date.
- new RTC registration functions to remove race conditions in drivers
Newly supported RTCs:
- Broadcom STB wake-timer
- Epson RX8130CE
- Maxim IC DS1308
- STMicroelectronics STM32H7
Drivers:
- ds1307: use regmap, use nvmem, more cleanups
- ds3232: temperature reading support
- gemini: renamed to ftrtc010
- m41t80: use CCF to expose the clock
- rv8803: use nvmem
- s3c: many cleanups
- st-lpc: fix y2106 bug
-----BEGIN PGP SIGNATURE-----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=QDxE
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Here is the pull-request for the RTC subsystem for 4.13.
Subsystem:
- expose non volatile RAM using nvmem instead of open coding in many
drivers. Unfortunately, this option has to be enabled by default to
not break existing users.
- rtctest can now test for cutoff dates, showing when an RTC will
start failing to properly save time and date.
- new RTC registration functions to remove race conditions in drivers
Newly supported RTCs:
- Broadcom STB wake-timer
- Epson RX8130CE
- Maxim IC DS1308
- STMicroelectronics STM32H7
Drivers:
- ds1307: use regmap, use nvmem, more cleanups
- ds3232: temperature reading support
- gemini: renamed to ftrtc010
- m41t80: use CCF to expose the clock
- rv8803: use nvmem
- s3c: many cleanups
- st-lpc: fix y2106 bug"
* tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
rtc: Remove wrong deprecation comment
nvmem: include linux/err.h from header
rtc: st-lpc: make it robust against y2038/2106 bug
rtc: rtctest: add check for problematic dates
tools: timer: add rtctest_setdate
rtc: ds1307: remove ds1307_remove
rtc: ds1307: use generic nvmem
rtc: ds1307: switch to rtc_register_device
rtc: rv8803: remove rv8803_remove
rtc: rv8803: use generic nvmem support
rtc: rv8803: switch to rtc_register_device
rtc: add generic nvmem support
rtc: at91rm9200: remove race condition
rtc: introduce new registration method
rtc: class separate id allocation from registration
rtc: class separate device allocation from registration
rtc: stm32: add STM32H7 RTC support
dt-bindings: rtc: stm32: add support for STM32H7
rtc: ds1307: add ds1308 variant
rtc: ds3232: add temperature support
...
Make driver use u64 variables and functions to be sure that
it will support dates after year 2038.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This removes a possible race condition and crash and allows for further
improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This removes a possible race condition and allows for further improvement
of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Many RTCs have an on board non volatile storage. It can be battery backed
RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace
and in-kernel consumers.
This stays compatible with the previous (non documented) ABI that was using
/sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about
the deprecation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
While highly unlikely, it is possible to get an interrupt as soon as it is
requested. In that case, at91_rtc_interrupt() will be called with rtc ==
NULL.
Solve that by using devm_rtc_allocate_device/rtc_register_device.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Introduce rtc_register_device() to register an already allocated and
initialized struct rtc_device. It automatically sets up the owner and the
two steps allocation/registration will allow to remove race conditions in
the IRQ handling of some driver. It also allows to properly extend the core
without adding more arguments to rtc_device_register().
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Create rtc_allocate_device to allocate memory for a struct rtc_device and
initialize it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds support for STM32H7 RTC. On STM32H7, the RTC bus interface
clock (APB clock) needs to be enabled.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The ds1308 variant is very similar to the already supported ds1338
variant, it have more debug registers and a square wave clock output.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
DS3232/DS3234 has the temperature registers with a resolution of 0.25
degree celsius. This enables to get the value through hwmon.
# cat /sys/class/hwmon/hwmon0/temp1_input
37250
Signed-off-by: Kirill Esipov <yesipov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
We should change this post-op to a pre-op because we want the loop to
exit with "timeout" set to zero.
Fixes: 0a89b55364 ("nuc900/rtc: change the waiting for device ready implement")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The Gemini RTC is actually a generic IP block from Faraday
Technology names FTRTC010. Rename the driver file and all
symbols to match this IP name.
The relationship can be clearly seen in the U-Boot driver
posted by Po-Yu Chuang for the Faraday A320 board:
https://lists.denx.de/pipermail/u-boot/2009-September/061326.html
Remove the dependency on ARCH_GEMINI but select the driver
for ARCH_GEMINI so we get a smooth transition. The IP block
is synthsized on different silicon and architectures.
Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This makes the Gemini optionally take two clock references to
the PCLK and EXTCLK. As we are adding a clock framework to the
Gemini platform we need to make sure that we get the right
references.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver has lots of places with chip-specific code what doesn't
necessarily facilitate maintenance.
Let's describe chip-specific differences in century bit handling
in struct chip_desc to improve this.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
After the switch to regmap we can now make use of regmap_update_bits
to simplify read/modify/write ops.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This adds support for the Broadcom STB wake-timer which is a timer in
the chip's 27Mhz clock domain that offers the ability to wake the system
(wake-up source) from suspend states (S2, S3, S5). It is supported using
the rtc framework allowing us to configure alarms for system wake-up.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add support for yet another RTC chip, Epson RX8130CE. This time around,
the chip has slightly permutated registers and also the register starts
at 0x10 instead of 0x0 .
So far, we only support the RTC and NVRAM parts of the chip, Alarm and
Timer is not supported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
clk_enable() can fail so handle such case.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
clk_prepare_enable() can fail so handle such case.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
All instances of struct s3c_rtc_data are in fact static const thus
put in rodata so we should not drop the const while getting the pointer
to them.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
There is no need for casting to void pointer for of_device_id data.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Minor cleanups to make the code easier to read. No functional changes.
1. Remove one space before labels as this is nowadays mostly preferred.
2. Fix indentation of arguments in function calls.
3. Split structure member declaration.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In other error paths in probe, centralized exit point was used so make
this consistent.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This variable was never used. With GCC 6.2, we get the following warning:
drivers/rtc/rtc-mxc.c:44:18: warning: ‘PIE_BIT_DEF’ defined but not used [-Wunused-const-variable=]
static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Provide an implementation of the callback
rtc_class_ops.alarm_irq_enable for rtc-opal driver. This callback is
called when the wake alarm is disabled via the command:
'echo 0 > /sys/class/rtc/rtc0/wakealarm'
Without this the Timed-Power-On(TPO) config remains set even when its
disabled by the above command and FSP will still force machine
boot at previously configured alarm time.
The callback is implemented as function opal_tpo_alarm_irq_enable()
which calls opal_set_tpo_time() with alarm.enabled == 0. A branch is
added to opal_set_tpo_time() to handle this case by passing y_m_d ==
h_m_s_ms == 0 to opal as arguments for opal_tpo_write() call.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rtc->name is only used in messages were it is superfluous. Remove it
completely from the structure.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc->name is superfluous here because the rtc is already registered at that
point and its name has already been printed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The name sysfs attribute is not useful in its current form because of all
the drivers:
- 3 are using the feature correctly
- 2 are clearly misusing it
- 60 are using driver.name, either directly or indirectly
- 46 are using pdev->name
- 8 are using client->name
- 31 are using a variation of driver.name (addition or removal of rtc-,
-rtc, _rtc, rtc_)
Make it uniform and use the driver name and the device name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In function __rtc_read_alarm() its possible for an alarm time-stamp to
be invalid even after replacing missing components with current
time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this
case and will cause the call to 'rtc_tm_to_time64(&alarm->time)'
return a negative value for variable t_alm.
While handling alarm rollover this negative t_alm (assumed to seconds
offset from '1970-01-01 00:00:00') is converted back to rtc_time via
rtc_time64_to_tm() which results in this error log with seemingly
garbage values:
"rtc rtc0: invalid alarm value: -2-1--1041528741
2005511117:71582844:32"
This error was generated when the rtc driver (rtc-opal in this case)
returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that
the alarm is disabled. Though I have submitted a separate fix for the
rtc-opal driver, this issue may potentially impact other
existing/future rtc drivers.
To fix this issue the patch validates the alarm time-stamp just after
filling up the missing datetime components and if rtc_valid_tm() still
reports it to be invalid then bails out of the function without
handling the rollover.
Reported-by: Steve Best <sbest@redhat.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
On PowerNV platform when Timed-Power-On(TPO) is disabled, read of
stored TPO yields value with all date components set to '0' inside
opal_get_tpo_time(). The function opal_to_tm() then converts it to an
offset from year 1900 yielding alarm-time == "1900-00-01
00:00:00". This causes problems with __rtc_read_alarm() that
expecting an offset from "1970-00-01 00:00:00" and returned alarm-time
results in a -ve value for time64_t. Which ultimately results in this
error reported in kernel logs with a seemingly garbage value:
"rtc rtc0: invalid alarm value: -2-1--1041528741
2005511117:71582844:32"
We fix this by explicitly handling the case of all alarm date-time
components being '0' inside opal_get_tpo_time() and returning -ENOENT
in such a case. This signals generic rtc that no alarm is set and it
bails out from the alarm initialization flow without reporting the
above error.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reported-by: Steve Best <sbest@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Some devices supported by the m41t80 driver have a programmable
square-wave output signal (see M41T80_FEATURE_SQ).
This enables to use this feature as a clock provider of common
clock framework.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In order to use the proper clock framework to control this feature.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch is only relevant for RTC with the SQ_ALT feature which
means the clock output frequency divider is stored in the weekday
register.
Current implementation discards the previous dividers value and clear
them as soon as the time is set.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Currently setting an alarm clears the SQWE bit which means that the
clock output is disabled no matter its previous state.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch extends the fixes for ds1337, ds1339, ds3231 in commit
8bc2a40730 ("rtc: ds1307: add support for the DT property
'wakeup-source'") to mcp794xx devices, so that those parts can similarly be
used as a wakeup source without an IRQ to the processor.
Tested on Raspberry Pi ZeroW with MCP79400.
Signed-off-by: David Lowe <dave-lowe@ntlworld.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch converts the ds1307 driver to using regmap. It's a rather
big patch and I can test with DS3231 only. With this chip it's
working fine.
I'd appreciate if people with other supported hardware could test as
well.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle) modified the core suspend-to-idle code to filter
out spurious SCI interrupts received while suspended, which requires
ACPI event source handlers to report wakeup events in a way that
will trigger a wakeup from suspend to idle (or abort system suspends
in progress, which is equivalent).
That needs to be done in the rtc-cmos driver too, which was overlooked
by the above commit, so do that now.
Fixes: eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reported-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Subsystem:
- Add OF device ID table for i2c drivers
New driver:
- Motorola CPCAP PMIC RTC
Drivers:
- cmos: fix IRQ selection
- ds1307: Add ST m41t0 support
- ds1374: fix watchdog configuration
- sh: Add rza series support
-----BEGIN PGP SIGNATURE-----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=40TA
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC subsystem update:
- Add OF device ID table for i2c drivers
New RTC driver:
- Motorola CPCAP PMIC RTC
RTC driver updates:
- cmos: fix IRQ selection
- ds1307: Add ST m41t0 support
- ds1374: fix watchdog configuration
- sh: Add rza series support"
* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: gemini: add return value validation
rtc: snvs: fix an incorrect check of return value
rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
rtc: sh: mark PM functions as unused
rtc: hid-sensor-time: remove some dead code
rtc: m41t80: Add proper compatible for rv4162
rtc: ds1307: Add m41t0 to OF device ID table
rtc: ds1307: support m41t0 variant
rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
x86: i8259: export legacy_pic symbol
dt-bindings: rtc: document the rtc-sh bindings
rtc: sh: add support for rza series
rtc: cpcap: kfreeing devm allocated memory
rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
rtc: cpcap: new rtc driver
dt-bindings: Add vendor prefix for Motorola
rtc: omap: mark PM methods as __maybe_unused
rtc: omap: remove incorrect __exit markups
...
Function devm_ioremap() will return a NULL pointer if it fails to remap
IO address, and its return value should be validated before it is used.
However, in function gemini_rtc_probe(), its return value is not
checked. This may result in bad memory access bugs on future access,
e.g. calling the function gemini_rtc_read_time().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Function devm_regmap_init_mmio() returns an ERR_PTR on error. However,
in function snvs_rtc_probe() its return value is checked against NULL.
This patch fixes it by checking the return value with IS_ERR().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls
through to the -EINVAL case. This is wrong since thew watchdog does
actually get stopped or started correctly.
Fixes: 920f91e50c ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The issue is that the internal counter that triggers the watchdog reset
is actually running at 4096 Hz instead of 1Hz, therefore the value
given by userland (in sec) needs to be multiplied by 4096 to get the
correct behavior.
Fixes: 920f91e50c ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The sh_rtc_set_irq_wake() function is only called from the suspend/resume handlers
that may be hidden, causing a harmless warning:
drivers/rtc/rtc-sh.c:724:13: error: 'sh_rtc_set_irq_wake' defined but not used [-Werror=unused-function]
static void sh_rtc_set_irq_wake(struct device *dev, int enabled)
The most reliable way to avoid the warning is to remove the existing #ifdef
and mark the two functions as __maybe_unused so the compiler can silently
drop all three when there is no reference.
Fixes: dab5aec64b ("rtc: sh: add support for rza series")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
devm_rtc_device_register() doesn't ever return NULL so there is no need
to check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The correct compatible for the rv4162 (microcrystal,rv4162) was not used
upstream and so was not added by eb235c561d.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The m41t0 variant is very similar to the already supported m41t00
variant, with the notable exception of the oscillator fail bit.
The data sheet notes:
If the oscillator fail (OF) bit is internally set to a '1,' this
indicates that the oscillator has either stopped, or was stopped
for some period of time and can be used to judge the validity of
the clock and date data.
The bit will get cleared with a regular write of the system time,
so no changes are needed to clear it.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
There's a funny typo where IRQ_NONE is used instead of IRQF_TRIGGER_NONE
for request_threaded_irq(). Let's fix it before it gets copied elsewhere.
Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
On some systems (e.g. Intel Bay Trail systems) the legacy PIC is not
used, in this case virq 8 will be a random irq, rather then hw_irq 8
from the PIC.
Requesting virq 8 in this case will not help us to get alarm irqs and
may cause problems for other drivers which actually do need virq 8,
for example on an Asus Transformer T100TA this leads to:
[ 28.745155] genirq: Flags mismatch irq 8. 00000088 (mmc0) vs. 00000080 (rtc0)
<snip oops>
[ 28.753700] mmc0: Failed to request IRQ 8: -16
[ 28.975934] sdhci-acpi: probe of 80860F14:01 failed with error -16
This commit fixes this by making the rtc-cmos driver continue
without using an irq rather then claiming irq 8 when no irq is
specified in the pnp-info and there are no legacy-irqs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This same RTC is used in RZ/A series MPUs, therefore with some slight
changes, this driver can be reused. Additionally, since ARM architectures
require Device Tree configurations, device tree support has been added.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Mostly straightforward, but we had to remove the rtc_dev_add/del_device
functions as they split up the cdev_add and the device_add.
Doing this also revealed that there was likely another subtle bug:
seeing cdev_add was done after device_register, the cdev probably
was not ready before device_add when the uevent occurs. This would
race with userspace, if it tried to use the device directly after
the uevent. This is fixed just by using the new helper function.
Another weird thing is this driver would, in some error cases, call
cdev_add() without calling cdev_init. This patchset corrects this
by avoiding calling cdev_add if the devt is not set.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We shouldn't kfree(rtc) because is devm_ managed memory. It leads to a
double free.
Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The to_wm8350_from_rtc_dev macro is not used by anything in the
rtc-wm8350 driver.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Instead of using #ifdef guards around PM methods, let's annotate
them as __maybe_unused, as it provides better compile coverage.
Also drop empty stub for omap_rtc_runtime_resume().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Even if bus is not hot-pluggable, devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe(), which specifically disables sysfs bind/unbind
attributes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver has a OF device ID table but the struct i2c_driver
.of_match_table field is not set.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The wakealarm attribute is currently not exposed in the sysfs interface
as the device has not been set as doing wakealarm when device_register
is called. Changing the order of the calls fixes that problem. Interrupts
are cleared in check_rtc_status prior to requesting the interrupt.
This is only set if an irq is defined. If irq registration fails then
set wakeup_capable to false. With this change the sysfs wakealarm
attribute will be left visible but it is non functional. rtcwake
still returns that the device is not enabled for wakeup.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Read control registers one by one and bulk read time registers.
This fixes when the clock is read, the watchdog counter register is zeroed.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Core changes:
- Switch the generic pin config argument from 16 to 24 bits,
only use 8 bits for the configuration type. We might need to
encode more information about a certain setting than we need
to encode different generic settings.
- Add a cross-talk API to the pin control GPIO back-end,
utilizing pinctrl_gpio_set_config() from GPIO drivers that
want to set up a certain pin configuration in the back-end.
This also includes the .set_config() refactoring of the
GPIO chips, so that they pass a generic configuration for
things like debouncing and single ended (typically open
drain). This change has also been merged in an immutable
branch to the GPIO tree.
- Take hogs with a delayed work, so that we finalize probing
a pin controller before trying to get any hogs.
- For pin controllers putting all group and function definitions
into the device tree, we now have generic code to deal with
this and it is used in two drivers so far.
- Simplifications of the pin request conflict check.
- Make dt_free_map() optional.
Updates to drivers:
- pinctrl-single now use the generic helpers to generate dynamic
group and function tables from the device tree.
- Texas Instruments IOdelay configuration driver add-on to
pinctrl-single.
- i.MX: use radix trees to store groups and functions, use the new
generic group and function helpers to manage them.
- Intel: add support for hardware debouncing and 1K pull-down.
New subdriver for the Gemini Lake SoC.
- Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.
- Aspeed: use syscon cross-dependencies to set up related bits in
the LPC host controller and display controller.
- Aspeed: finalize G4 and G5 support. Fix mux configuration on
GPIOs. Add banks Y, Z, AA, AB and AC.
- AMD: support additional GPIO.
- STM32: set this controller to strict muxing mode.
STM32H743 MCU support.
- Allwinner sunxi: deep simplifications on how to support
subvariants of SoCs without adding to much SoC-specific data
for each subvariant, especially for sun5i variants. New driver
for V3s SoCs. New driver for the H5 SoC. Support A31/A31s
variants with the new variant framework.
- Mvebu: simplifications to use a MMIO and regmap abstraction.
New subdrivers for the 98DX3236, 98DX5241 SoCs.
- Samsung Exynos: delete Exynos4415 support. Add crosstalk to the
SoC driver to access regmaps. Add infrastructure for pin-bank
retention control. Clean out the pin retention control from
arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly
in the Samsung pin control driver(s).
- Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.
- Qualcomm: use raw spinlock variants: this makes the qualcomm
driver realtime-safe.
-----BEGIN PGP SIGNATURE-----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=IMY0
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pin control bulk changes for the v4.11 kernel cycle.
Core changes:
- Switch the generic pin config argument from 16 to 24 bits, only use
8 bits for the configuration type. We might need to encode more
information about a certain setting than we need to encode
different generic settings.
- Add a cross-talk API to the pin control GPIO back-end, utilizing
pinctrl_gpio_set_config() from GPIO drivers that want to set up a
certain pin configuration in the back-end.
This also includes the .set_config() refactoring of the GPIO chips,
so that they pass a generic configuration for things like
debouncing and single ended (typically open drain). This change has
also been merged in an immutable branch to the GPIO tree.
- Take hogs with a delayed work, so that we finalize probing a pin
controller before trying to get any hogs.
- For pin controllers putting all group and function definitions into
the device tree, we now have generic code to deal with this and it
is used in two drivers so far.
- Simplifications of the pin request conflict check.
- Make dt_free_map() optional.
Updates to drivers:
- pinctrl-single now use the generic helpers to generate dynamic
group and function tables from the device tree.
- Texas Instruments IOdelay configuration driver add-on to
pinctrl-single.
- i.MX: use radix trees to store groups and functions, use the new
generic group and function helpers to manage them.
- Intel: add support for hardware debouncing and 1K pull-down. New
subdriver for the Gemini Lake SoC.
- Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.
- Aspeed: use syscon cross-dependencies to set up related bits in the
LPC host controller and display controller.
- Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
Add banks Y, Z, AA, AB and AC.
- AMD: support additional GPIO.
- STM32: set this controller to strict muxing mode. STM32H743 MCU
support.
- Allwinner sunxi: deep simplifications on how to support subvariants
of SoCs without adding to much SoC-specific data for each
subvariant, especially for sun5i variants. New driver for V3s SoCs.
New driver for the H5 SoC. Support A31/A31s variants with the new
variant framework.
- Mvebu: simplifications to use a MMIO and regmap abstraction. New
subdrivers for the 98DX3236, 98DX5241 SoCs.
- Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
driver to access regmaps. Add infrastructure for pin-bank retention
control. Clean out the pin retention control from
arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
the Samsung pin control driver(s).
- Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.
- Qualcomm: use raw spinlock variants: this makes the qualcomm driver
realtime-safe"
* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
pinctrl: intel: unlock on error in intel_config_set_pull()
pinctrl: berlin: make bool drivers explicitly non-modular
pinctrl: spear: make bool drivers explicitly non-modular
pinctrl: mvebu: make bool drivers explicitly non-modular
pinctrl: sunxi: make sun5i explicitly non-modular
pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
pinctrl: samsung: mark PM functions as __maybe_unused
pinctrl: sunxi: Remove redundant A31s pinctrl driver
pinctrl: sunxi: Support A31/A31s with pinctrl variants
pinctrl: Amend bindings for STM32 pinctrl
pinctrl: Add STM32 pinctrl driver DT bindings
pinctrl: stm32: Add STM32H743 MCU support
include: dt-bindings: Add STM32H7 pinctrl DT defines
gpio: aspeed: Remove dependence on GPIOF_* macros
pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
drivers: pinctrl: add driver for Allwinner H5 SoC
pinctrl: intel: Add Intel Gemini Lake pin controller support
pinctrl: intel: Add support for 1k additional pull-down
pinctrl: intel: Add support for hardware debouncer
...
The Armada 7K/8K use the same RTC IP than the Armada 38x. However the SOC
integration differs in 2 points:
- MBUS bridge timing initialization
- IRQ configuration at SoC level
Moreover the Armada 7K/8K have an issue preventing to get the interrupt
from alarm 1. This commit allows to use alarm 2 for these A7K/8K but to
still use alarm 1 for the Armada 38x.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In order to prepare the introduction of the A7K/A8K version of the RTC,
this commit introduces a new data structure. This structure allows to
handle the differences between the integration of the RTC IP in the
SoCs. It will be:
- MBUS bridge timing initialization
- IRQ configuration at SoC level
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the max_register to the regmap_config definition. This allows
dumping of the device's registers via the regmap debugfs interface.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Whitespace was a combination of spaces and tabs.
Use spaces and align register / bit definitions.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
All users of this driver have been updated to allow the driver to
manage it's own resources and do the read/write operations internally.
The m48t86_ops are no longer used.
Remove the platform_data header and the support code in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The RTC is an optional feature at purchase time on some Technologic
Systems boards. Verify that it actually exists by checking if the
last two bytes of the NVRAM can be changed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This RTC has 114 bytes of NVRAM. Provide access to it via a binary
sysfs 'nvram' attribute file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Allow this driver to, optionally, manage it's own resources and do the
read/write operations if the platform does not provide them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
For aesthetics. Shorten all the register names by removing '_REG' from all
of them.
This helps fix all the checkpatch.pl issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In case of error, the function of_io_request_and_map() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
COMPILE_TEST was wrongly placed, move it to the "depends on" line.
Also depend on COMMON_CLK as the driver now needs it to be properly
compiled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator") adds
a new clock for the rtc block with a 2 step probe mechanism. To share
the register region between both the clock and rtc instance, a static
pointer is used to keep the related data structure.
To preserve compatibility with the old binding, the data structure
should be saved as soon as the registers are mapped in, regardless
of the presence of the clock bindings, so that the rtc device can
retrieve it when it is probed.
This fixes the rtc device not probing when we use the updated driver
with an old device tree blob.
Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The clear of the LPTA_EN flag should be synced before writing to the
alarm register. Omitting this synchronization creates a race when
trying to change existing alarm.
Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The bq32000 includes a trickle charge circuit to maintain the charge of the
backup supply when a super capacitor is used.
You can enable the charging circuit by setting 'trickle-resistor-ohms',
additionally you can set TCFE to 1 to bypass the internal diode and boost
the charge voltage of the backup supply. You might want to enable/disable
the TCFE switch from userspace (e.g when device is only connected to a
battery)
This patch introduces a new sysfs entry to enable and disable this FET
form userspace.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Now that we have a devm variant of rtc_device_register, switch to it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The RTC controls the input source of the main 32kHz oscillator in the
system, feeding it to the clock unit too.
By default, this is using an internal, very inaccurate (+/- 30%)
oscillator with a divider to make it roughly around 32kHz. This is however
quite impractical for the RTC, since our time will not be tracked properly.
Since this oscillator is an input of the main clock unit, and since that
clock unit will be probed using CLK_OF_DECLARE, we have to use it as well,
leading to a two stage probe: one to enable the clock, the other one to
enable the RTC.
There is also a slight change in the binding that is required (and should
have been from the beginning), since we'll need a phandle to the external
oscillator used on that board. We support the old binding by not allowing
to switch to the external oscillator and only using the internal one (which
was the previous behaviour) in the case where we're missing that phandle.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The RTC is clocked from either an internal, imprecise, oscillator or an
external one, which is usually much more accurate.
The difference perceived between the time elapsed and the time reported by
the RTC is in a 10% scale, which prevents the RTC from being useful at all.
Fortunately, the external oscillator is reported to be mandatory in the
Allwinner datasheet, so we can just switch to it.
Cc: stable@vger.kernel.org
Fixes: 9765d2d943 ("rtc: sun6i: Add sun6i RTC driver")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Some registers have a read-modify-write access pattern that are not atomic.
Add some locking to prevent from concurrent accesses.
Cc: stable@vger.kernel.org
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
By using kernel_halt() instead of machine_halt(), we can make the driver
build as a module.
However, jz4740 platforms not loading this module will not be able to power
off.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Revert "rtc: jz4740: make the driver builtin only"
This reverts commit b9168c539c.
The current pinconf packed format allows only 16-bit argument limiting
the maximum value 65535. For most types this is enough. However,
debounce time can be in range of hundreths of milliseconds in case of
mechanical switches so we cannot represent the worst case using the
current format.
In order to support larger values change the packed format so that the
lower 8 bits are used as type which leaves 24 bits for the argument.
This allows representing values up to 16777215 and debounce times up to
16 seconds.
We also convert the existing users to use 32-bit integer when extracting
argument from the packed configuration value.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since we have to provide the clock very early on, the RTC driver cannot be
built as a module. Make sure that won't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patches fixes comparison between signed and unsigned values as it
could produce an incorrect result when the signed value is converted to
unsigned:
drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_valid_alrm':
drivers/rtc/rtc-stm32.c:404:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if ((((tm->tm_year > cur_year) &&
...
It also fixes comparison always true or false due to the fact that unsigned
value is compared against zero with >= or <:
drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_init':
drivers/rtc/rtc-stm32.c:514:35: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
for (pred_a = pred_a_max; pred_a >= 0; pred_a-- ) {
drivers/rtc/rtc-stm32.c:530:44: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(rate - ((pred_a + 1) * (pred_s + 1)) < 0) ?
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Using the ~ operator on a BIT() constant results in a large 'unsigned long'
constant that won't fit into an 'unsigned int' function argument on 64-bit
architectures, resulting in a harmless build warning in x86 allmodconfig:
drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_probe':
drivers/rtc/rtc-stm32.c:651:51: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
As PWR_CR_DBP mask prevents other bits to be cleared, replace all
~PWR_CR_DBP by 0.
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Accessing the registers of the RTC block on Tegra requires the module
clock to be enabled. This only works because the RTC module clock will
be enabled by default during early boot. However, because the clock is
unused, the CCF will disable it at late_init time. This causes the RTC
to become unusable afterwards. This can easily be reproduced by trying
to use the RTC:
$ hwclock --rtc /dev/rtc1
This will hang the system. I ran into this by following up on a report
by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It
turns out that the rtc-tegra driver's ->shutdown() implementation will
hang the CPU, because of the disabled clock, before the system can be
rebooted.
What confused me for a while is that the same driver is used on prior
Tegra generations where the hang can not be observed. However, as Peter
De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC
clock is enabled by the tegra20_timer.c clocksource driver, which uses
the RTC to provide a persistent clock. This code is never enabled on
64-bit Tegra because the persistent clock infrastructure does not exist
on 64-bit ARM.
The proper fix for this is to add proper clock handling to the RTC
driver in order to ensure that the clock is enabled when the driver
requires it. All device trees contain the clock already, therefore
no additional changes are required.
Reported-by: Martin Michlmayr <tbm@cyrius.com>
Acked-By Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The ordering of includes is currently completely arbitrary, making it
impossible to decide where to put new includes. Remove the dilemma by
sort the include list alphabetically.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The new driver has a stray #ifdef in it that causes a build error:
drivers/rtc/rtc-stm32.c:718:21: error: 'stm32_rtc_of_match' undeclared here (not in a function); did you mean 'stm32_rtc_pm_ops'?
As the #ifdef serves no purpose here, let's just remove it.
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The remove function can be called at runtime for a manual 'unbind'
operation and must not be left out from a built-in driver, as kbuild
complains:
`stm32_rtc_remove' referenced in section `.data.stm32_rtc_driver' of drivers/rtc/rtc-stm32.o: defined in discarded section `.exit.text' of drivers/rtc/rtc-stm32.o
This removes the extraneous annotation.
Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds support for the STM32 RTC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Armada38x wants to modify its rtc_class_ops to remove the interrupt
handling when there is no usable interrupt, but this means we leave
function pointers in writable memory.
Since rtc_class_ops is small, arrange to have two instances, one for
when we have interrupts, and one for when we have none, both marked
const. This allows the compiler to place them in read-only memory,
which is better than placing them in __ro_after_init.
Thanks to Bhumika Goyal <bhumirks@gmail.com> for pointing out that
the structure was writable and submitting a patch to add
__ro_after_init.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Declare rtc_class_ops structures as const as they are only passed
as an argument to the function devm_rtc_device_register. This argument
is of type const struct rtc_class_ops *, so rtc_class_ops structures
having this property can be declared const.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct rtc_class_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
@@
devm_rtc_device_register(...,&i@p,...)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct rtc_class_ops i;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The DryIce chipset has a dedicated security violation interrupt that is
triggered for security violations (if configured to do so). According
to the publicly available imx258 reference manual, irq 56 is used for
this interrupt.
If an irq number is provided for the security violation interrupt,
install the same handler that we're already using for the "normal"
interrupt.
imxdi->irq is used only in the probe function, make it a local variable.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds alarm support. This allows to configure the chip
to generate an interrupt when the alarm matches current time value.
Alarm can be programmed up to one year in the future
and is accurate to the second.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds support for saving/loading weekday value from the chip.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
According to RES-3124064:
The device supports CPU write and read access to the RTC time register.
However, due to this restriction, read and write from/to internal RTC
register may fail.
Workaround:
General setup:
1. Configure the RTC Mbus Bridge Timing Control register (offset 0x184A0)
to value 0xFD4D4FFF
Write RTC WRCLK Period to its maximum value (0x3FF)
Write RTC WRCLK setup to 0x29
Write RTC WRCLK High Time to 0x53 (default value)
Write RTC Read Output Delay to its maximum value (0x1F)
Mbus - Read All Byte Enable to 0x1 (default value)
2. Configure the RTC Test Configuration Register (offset 0xA381C) bit3
to '1' (Reserved, Marvell internal)
For any RTC register read operation:
1. Read the requested register 100 times.
2. Find the result that appears most frequently and use this result
as the correct value.
For any RTC register write operation:
1. Issue two dummy writes of 0x0 to the RTC Status register (offset
0xA3800).
2. Write the time to the RTC Time register (offset 0xA380C).
This patch is based on the work of Shaker Daibes
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes checkpatch.pl warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Texas Instrument's TPS65910 has support for compensating RTC crystal
inaccuracies. When enabled every hour RTC counter value will be compensated
with two's complement value.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Subsystem:
- non-modular drivers are now explicitly non-modular
New driver:
- Epson Toyocom rtc-7301sf/dg
Drivers:
- cmos: reject unsupported alarm values wrt the RTC capabilities
- ds1307: ACPI support
- jz4740: DT support, jz4780 handling, can now be used as a system power
controller
- mcp795: many fixes, in particular proper month handling
- twl: driver is now DT only
-----BEGIN PGP SIGNATURE-----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=z4SX
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- non-modular drivers are now explicitly non-modular
New driver:
- Epson Toyocom rtc-7301sf/dg
Drivers:
- cmos: reject unsupported alarm values wrt the RTC capabilities
- ds1307: ACPI support
- jz4740: DT support, jz4780 handling, can now be used as a system
power controller
- mcp795: many fixes, in particular proper month handling
- twl: driver is now DT only"
* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: mcp795: Fix whitespace and indentation.
rtc: mcp795: Prefer using the BIT() macro.
rtc: mcp795: fix month write resetting date to 1.
rtc: mcp795: fix time range difference between linux and RTC chip.
rtc: mcp795: fix bitmask value for leap year (LP).
rtc: mcp795: use bcd2bin/bin2bcd.
rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
rtc: ds1307: Add ACPI support
rtc: imxdi: (trivial) fix a typo
rtc: ds1374: Merge conditional + WARN_ON()
rtc: twl: make driver DT only
rtc: twl: kill static variables
rtc: fix typos in Kconfig
rtc: jz4740: make the driver builtin only
rtc: jz4740: remove unused EXPORT_SYMBOL
Documentation: bindings: fix twl-rtc documentation
rtc: Enable compile testing for Maxim and Samsung drivers
MIPS: jz4740: Remove obsolete code
MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
...
Fix whitespace and indentation errors and the following
checkpatch warnings:
- line 15: Block comments use a trailing */ on a separate line
- line 256: Line over 80 characters
No code change.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch doesn't change the code but replaces all bitmask values
with the BIT(x) macro.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
According to Microchip errata some combinations of date and month
values may result in the date being reset to 1, even if the date
is also written with the month (for example 31-07 or 31-08).
As a workaround avoid writing date and month values within the same
Write command. Instead, terminate the Write command after loading
the date and begin a new command to write the month. In addition,
disable the oscillator before loading the new values. This is done
by ensuring both the ST and EXTOSC bits are cleared and waiting for
the OSCON bit to clear.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG,
month range is 1~12. This patch adjusts difference of them.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
According the datasheet the leap year is a fifth bit in month register.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions.
This change fixes the wrong conversion of month value
from binary to BCD (missing right shift operation for 10 month).
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.
This driver supports basic clock, calendar and alarm functionality.
Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch enables ACPI support for rtc-ds1307 driver.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Pull timer updates from Thomas Gleixner:
"The time/timekeeping/timer folks deliver with this update:
- Fix a reintroduced signed/unsigned issue and cleanup the whole
signed/unsigned mess in the timekeeping core so this wont happen
accidentaly again.
- Add a new trace clock based on boot time
- Prevent injection of random sleep times when PM tracing abuses the
RTC for storage
- Make posix timers configurable for real tiny systems
- Add tracepoints for the alarm timer subsystem so timer based
suspend wakeups can be instrumented
- The usual pile of fixes and updates to core and drivers"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
timekeeping: Use mul_u64_u32_shr() instead of open coding it
timekeeping: Get rid of pointless typecasts
timekeeping: Make the conversion call chain consistently unsigned
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
alarmtimer: Add tracepoints for alarm timers
trace: Update documentation for mono, mono_raw and boot clock
trace: Add an option for boot clock as trace clock
timekeeping: Add a fast and NMI safe boot clock
timekeeping/clocksource_cyc2ns: Document intended range limitation
timekeeping: Ignore the bogus sleep time if pm_trace is enabled
selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
arm64: dts: rockchip: Arch counter doesn't tick in system suspend
clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
posix-timers: Make them configurable
posix_cpu_timers: Move the add_device_randomness() call to a proper place
timer: Move sys_alarm from timer.c to itimer.c
ptp_clock: Allow for it to be optional
Kconfig: Regenerate *.c_shipped files after previous changes
...
