Commit graph

103 commits

Author SHA1 Message Date
Breno Leitao
ccdddf500f cxgb3: Fixing EEH handlers
After commit 4b77b0a2ba ("PCI: Clear
saved_state after the state has been restored"), the EEH is not
working proplery on cxgb3.

This patch fixes it, always saving the PCI state after a recovery,
in order to allow further reoveries.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11 15:07:56 -08:00
Joe Perches
8e95a2026f drivers/net: Move && and || to end of previous line
Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.

Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)

Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 13:18:01 -08:00
Ben Hutchings
34336ec032 cxgb3: declare MODULE_FIRMWARE
Replace run-time string formatting with preprocessor string
manipulation.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10 20:28:50 -08:00
Karen Xie
f14d42f314 cxgb3: Added private MAC address and provisioning packet handler for iSCSI
This patch added support of private MAC address per port and provisioning
packet handler for iSCSI traffic only.

The above changes are isolated to the cxgb3 driver, independent of any scsi or iscsi driver changes.

Acked-by: Karen Xie <kxie@chelsio.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:44:06 -07:00
Linus Torvalds
d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Steve Wise
fa0d4c11c4 RDMA/cxgb3: Handle port events properly
Massage the err_handler upcall into an event handler upcall, pass
netdev port events to the cxgb3 ULPs and generate RDMA port events
based on LLD port events.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:22:38 -07:00
Divy Le Ray
9450526ac7 cxgb3: fix EDC filename string
Fix a cut'n paste error in the AEL2020 twinax EDC file name

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02 12:23:33 -07:00
David S. Miller
e5a8a896f5 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-07-09 20:18:24 -07:00
Roland Dreier
e594e96e8a cxgb3: Fix crash caused by stashing wrong netdev_queue
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how
cxgb3 looks up the netdev_queue it stashes away in a qset during
initialization.  For multiport devices, the TX queue index it uses is
offset by the first_qset index of each port.  This leads to a crash
once LLTX is removed, since hard_start_xmit is called with one TX
queue lock held, while the TX reclaim timer task grabs a different
(wrong) TX queue lock when it frees skbs.

Fix this by removing the first_qset offset used to look up the TX
queue passed into t3_sge_alloc_qset() from setup_sge_qsets().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09 17:16:06 -07:00
Divy Le Ray
34701fde8f cxgb3: Drain Mac Tx fifo when the port goes down.
Drain the MAC TX fifos when a port goes down.
Back pressure might otherwise occur, leading to both
ports of the same adapter to hang.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 10:54:27 -07:00
Divy Le Ray
dce7d1d031 cxgb3: Fix mss table initialization
Fix the HW SMT table initialization to avoid random
mss miscomputations for offload connections.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 10:54:25 -07:00
Divy Le Ray
2e8c07c35b cxgb3: use request_firmware() for the EDC registers setup
use request_firmware() to load the phy's EDC programmation

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 10:54:24 -07:00
Divy Le Ray
74b793e1ef cxgb3: remove __GFP_NOFAIL usage
Pre-allocate a skb at init time to be used for control messages to the HW
if skb allocation fails.

Tolerate failures to send messages initializing some memories at the cost of
parity error detection for these memories.
Retry sending connection id release messages if both alloc_skb(GFP_ATOMIC)
and alloc_skb(GFP_KERNEL) fail.
Do not bring the interface up if messages binding queue set to port fail to
be sent.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:13 -07:00
David S. Miller
b2f8f7525c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/forcedeth.c
2009-06-03 02:43:41 -07:00
Divy Le Ray
744514249f cxgb3: Add Aeluros 2020 phy support
Add support for the AEL2020 phy.
Add PCI IDs of the boards using this phy.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 15:55:04 -07:00
Divy Le Ray
c3a8c5b644 cxgb3: move away from LLTX
cxgb3 no longer advertizes LLTX.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 15:55:03 -07:00
Divy Le Ray
c22c814931 cxgb3: link fault fixes
Do not call t3_link_fault() under spinlock, as it calls msleep().
Besides, only the access to pi->link_fault needs to be serialized.

Also initialize local variables before checking the link status,
link state fields might otherwise end up containing garbage.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:41 -07:00
Ben Hutchings
0f07c4ee8c cxgb3: Use generic MDIO definitions and mdio_mii_ioctl()
Compile-tested only.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29 17:32:32 -07:00
Divy Le Ray
e8d1937073 cxgb3: Fix EEH final recovery attempt
EEH attempts to recover up 6 times.
The last attempt leaves all the ports and adapter down.hen
The driver is then unloaded, bringing the adapter down again
unconditionally. The unload will hang.
Check if the adapter is already down before trying to bring it down again.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:27 -07:00
Divy Le Ray
2c2f409f32 cxgb3: Fix potential msi-x vector leak
Release vectors when a MSI-X allocation fails.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:25 -07:00
Divy Le Ray
c80b0c28ca cxgb3: fix workqueue flush issues
The fatal error task can be scheduled while processing an offload packet
in NAPI context when the connection handle is bogus. this can race
with the ports being brought down and the cxgb3 workqueue being flushed.
Stop napi processing before flushing the work queue.

The ULP drivers (iSCSI, iWARP) might also schedule a task on keventd_wk
while releasing a connection handle (cxgb3_offload.c::cxgb3_queue_tid_release()).
The driver however does not flush any work on keventd_wq while being unloaded.
This patch also fixes this.

Also call cancel_delayed_work_sync in place of the the deprecated
cancel_rearming_delayed_workqueue.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:24 -07:00
Divy Le Ray
3851c66cf0 cxgb3: fix link fault handling
Use the existing periodic task to handle link faults.
The link fault interrupt handler is also called in work queue context,
which is wrong and might cause potential deadlocks.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:23 -07:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Divy Le Ray
952cdf333f cxgb3: differentiate portx and Tx channels
Separate ports from H/W Tx channels.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:58 -07:00
Divy Le Ray
68f40c1029 cxgb3: use resource_size_t for mmio declarations
Use resource_size_t to declare mmio start and len variables.
Print PEX error register after EEH resumed.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:58 -07:00
Divy Le Ray
3156378993 cxgb3: start qset timers when setup succeeded
Start queue set reclaim timers after the queue sets have been
allocated successfully.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:56 -07:00
Divy Le Ray
bf792094ef cxgb3: detect mac link faults.
The driver currently ignores the local or remote link faults
raised at the mac layer. This patch fixes it.
Our mac however only advertizes link events, so wait for the
phy to stabilize the link, then enable mac link events interrupts.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:47 -07:00
Divy Le Ray
fc88219601 cxgb3: disable high freq non-data interrupts
Under RX pressure, The HW might generate a high load of interrupts
to signal mac fifo or free lists overflow.
Disable the interrupts, and poll the relevant status bits
to maintain stats.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:45 -07:00
David S. Miller
e70049b9e7 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-24 03:50:29 -08:00
Divy Le Ray
ce03aaddd4 cxgb3: Add support for PCI ID 0x35.
Add support for adapters with a PCI id equal to 0x35.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-18 17:47:57 -08:00
Hannes Eder
97915b5bf6 drivers/net/cxgb3: fix sparse warning: symbol shadows an earlier one
Impact: Move variable declaration as close to usage as possible.

Fix this sparse warning:
  drivers/net/cxgb3/cxgb3_main.c:1586:21: warning: symbol 'cap' shadows an earlier one

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-17 17:26:09 -08:00
Divy Le Ray
cb0bc20595 cxgb3: Notify fatal errors
Set up a notification mechanism to inform upper layer modules
(iWARP, iSCSI) of a chip reset due to an EEH event or a fatal error.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 22:21:59 -08:00
Herbert Xu
7be2df451f cxgb3: Replace LRO with GRO
This patch makes cxgb3 invoke the GRO hooks instead of LRO.  As
GRO has a compatible external interface to LRO this is a very
straightforward replacement.

I've kept the ioctl controls for per-queue LRO switches.  However,
we should not encourage anyone to use these.

Because of that, I've also kept the skb construction code in
cxgb3.  Hopefully we can phase out those per-queue switches
and then kill this too.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:39:13 -08:00
Divy Le Ray
5cda9364f1 cxgb3: ease msi-x settings conditions
The driver currently drops to line interrupt mode
if it did not get all the msi-x vectors it requested.

Allow msi-x settings when a minimal amount of vectors
is provided.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:03 -08:00
Roland Dreier
47fd23fe8e cxgb3: Keep LRO off if disabled when interface is down
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge.  Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding.  (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)

This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.

Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up.  I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:19:36 -08:00
Divy Le Ray
8207befa19 cxgb3: untie strict FW matching
The NIC driver can work with mutliple versions of the FW.
Let the driver load when the embedded FW does not match,
and the FW update mechanism failed.
The iWARP module will make its own loading decision.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 01:51:47 -08:00
Divy Le Ray
82ad332974 cxgb3: Add multiple Tx queue support.
Implement NIC Tx multiqueue.
Bump up driver version.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 01:09:39 -08:00
Divy Le Ray
851fd7bd88 cxgb3: Update FW loading path.
Update FW loading path to accomodate in-kernel images location

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:38:36 -08:00
Divy Le Ray
43a944f373 cxgb3: set hard_xmit in the netdev_ops
Fix t3_eth_xmit() missing into the netdev_ops structure.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:35:26 -08:00
Stephen Hemminger
008298231a netdev: add more functions to netdevice ops
This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
Stephen Hemminger
dd7526960e cxgb3: convert to net_device_ops
Convert this driver to network device ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:42:49 -08:00
David S. Miller
198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
Steve Wise
cf3760dad5 RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface.
When the iw_cxgb3 module's cxgb3_client "add" func gets called by the
cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo
function in cxgb3 to get the fw version and other info.  Currently the
iwarp driver grabs the rtnl lock around this down call to serialize.
As of 2.6.27 or so, things changed such that the rtnl lock is held around
the call to the netdev driver open function.  Also the cxgb3_client "add"
function doesn't get called if the device is down.

So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device,
the iw_cxgb3 add func gets called with the rtnl_lock held.   If you
load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func
gets called without the rtnl_lock held.  The former causes the deadlock,
the latter does not.

In addition, there are iw_cxgb3 sysfs handlers that also can call
down into cxgb3 to gather the fw and hw versions.  These can be called
concurrently on different processors and at any time.  Thus we need to
push this serialization down in the cxgb3 driver get_drvinfo func.

The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-11 03:52:10 -05:00
Divy Le Ray
f9ee388296 cxgb3 - Limit multiqueue setting to msi-x
Allow multiqueue setting in MSI-X mode only

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-11 03:50:43 -05:00
Divy Le Ray
04ecb07241 cxgb3 - enable lro control through ethtool
Implement ethtool's get_flags and set_flags methods.
It enables ethtool to control the LRO settings.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:52:51 -04:00
Divy Le Ray
a02d44a02b cxgb3: extend copyrights to 2008
Update copyright banner to 2008.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13 18:47:30 -07:00
Divy Le Ray
1e8820256f cxgb3: Support for Aeluros 2005 PHY
Add support for SR PHY.
Auto-detect phy module type, and report type changes.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:40:07 -07:00
Divy Le Ray
9b1e36566c cxgb3: commnonize LASI phy code
Add generic code to manage interrupt driven PHYs.
Do not reset the phy after link parameters update,
the new values might get lost.
Return early from link change notification
when the link parameters remain unchanged.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:39:31 -07:00
Divy Le Ray
044979827e cxgb3: simplify port type struct and usage
Second step in overall phy layer reorganization.
Clean up the port_type_info structure.
Support coextistence of clause 22 and clause 45 MDIO devices.
Select the type of MDIO transaction on a per transaction basis.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:38:29 -07:00