Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout
or attached stateful expressions like counters or quotas - reset them
all at once. Respect a per element timeout value if present to reset the
'expires' value to.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When all tried source tuples are in use, the connection request (skb)
and the new conntrack will be dropped in nf_confirm() due to the
non-recoverable clash.
Make it so that the last 32 attempts are allowed to evict a colliding
entry if this connection is already closing and the new sequence number
has advanced past the old one.
Such "all tuples taken" secenario can happen with tcp-rpc workloads where
same dst:dport gets queried repeatedly.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that set->nelems is always updated permit update of the sets max size.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Callers already hold rcu_read_lock.
Prior to RCU conversion this used to be a read_lock_bh(), but now the
bh-disable isn't needed anymore.
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As we allow the hash table to be configured to rows above 2^20,
we should limit it depending on the available memory to some
sane values. Switch to kvmalloc allocation to better select
the needed allocation type.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Current range [8, 20] is set purely due to historical reasons
because at the time, ~1M (2^20) was considered sufficient.
With this change, 27 is the upper limit for 64-bit, 20 otherwise.
Previous change regarding this limit is here.
Link: https://lore.kernel.org/all/86eabeb9dd62aebf1e2533926fdd13fed48bab1f.1631289960.git.aclaudi@redhat.com/T/#u
Signed-off-by: Abhijeet Rastogi <abhijeet.1989@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Devlink health is involved in error recovery. Machines in bad
state tend to be fairly unreliable, and occasionally get stuck
in error loops. Even with a reasonable grace period devlink health
may get a thousand reports in an hour.
In case of reporting on an unregistered devlink instance
the subsequent reports don't add much value. Switch to
WARN_ON_ONCE() to avoid flooding dmesg and fleet monitoring
dashboards.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230531015523.48961-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If PREEMPT_RT is set, then assume that the user focuses on minimum
latency. Therefore don't set sw irq coalescing defaults.
This affects the defaults only, users can override these settings
via sysfs.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f9439c7f-c92c-4c2c-703e-110f96d841b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offloading drivers may report some additional statistics counters, some
of them even suggested by 802.1Q, like TransmissionOverrun.
In my opinion we don't have to limit ourselves to reporting counters
only globally to the Qdisc/interface, especially if the device has more
detailed reporting (per traffic class), since the more detailed info is
valuable for debugging and can help identifying who is exceeding its
time slot.
But on the other hand, some devices may not be able to report both per
TC and global stats.
So we end up reporting both ways, and use the good old ethtool_put_stat()
strategy to determine which statistics are supported by this NIC.
Statistics which aren't set are simply not reported to netlink. For this
reason, we need something dynamic (a nlattr nest) to be reported through
TCA_STATS_APP, and not something daft like the fixed-size and
inextensible struct tc_codel_xstats. A good model for xstats which are a
nlattr nest rather than a fixed struct seems to be cake.
# Global stats
$ tc -s qdisc show dev eth0 root
# Per-tc stats
$ tc -s class show dev eth0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be
able to report statistics (which is future work), it seems that we need
to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO)
multiplexing, and pass the command as part of the common portion of the
muxed structure.
Since we already have an "enable" variable in tc_taprio_qopt_offload,
refactor all drivers to check for "cmd" instead of "enable", and reject
every other command except "replace" and "destroy" - to be future proof.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In taprio_dump_class_stats() we don't need a reference to the root Qdisc
once we get the reference to the child corresponding to this traffic
class, so it's okay to overwrite "sch". But in a future patch we will
need the root Qdisc too, so create a dedicated "child" pointer variable
to hold the child reference. This also makes the code adhere to a more
conventional coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_gro_complete() function only updates the skb fields related to GRO
and it always returns zero. All the 3 drivers which are using it
do not check for the return value either.
Change it to return void instead which simplifies its callers as
error handing becomes unnecessary.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit a4dfa72d0a ("tipc: set default MTU for UDP media"), it's
been no longer using dev->mtu for b->mtu, and the issue described in
commit 3de81b7588 ("tipc: check minimum bearer MTU") doesn't exist
in UDP bearer any more.
Besides, dev->mtu can still be changed to a too small mtu after the UDP
bearer is created even with tipc_mtu_bad() check in tipc_udp_enable().
Note that NETDEV_CHANGEMTU event processing in tipc_l2_device_event()
doesn't really work for UDP bearer.
So this patch deletes the unnecessary tipc_mtu_bad from tipc_udp_enable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/282f1f5cc40e6cad385aa1c60569e6c5b70e2fb3.1685371933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the 'TCA_FLOWER_L2_MISS' netlink attribute that allows user space to
match on packets that encountered a layer 2 miss. The miss indication is
set as metadata in the tc skb extension by the bridge driver upon FDB or
MDB lookup miss and dissected by the flow dissector to the
'FLOW_DISSECTOR_KEY_META' key.
The use of this skb extension is guarded by the 'tc_skb_ext_tc' static
key. As such, enable / disable this key when filters that match on layer
2 miss are added / deleted.
Tested:
# cat tc_skb_ext_tc.py
#!/usr/bin/env -S drgn -s vmlinux
refcount = prog["tc_skb_ext_tc"].key.enabled.counter.value_()
print(f"tc_skb_ext_tc reference count is {refcount}")
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
# tc filter add dev swp1 egress proto all handle 101 pref 1 flower src_mac 00:11:22:33:44:55 action drop
# tc filter add dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:11:22:33:44:55 l2_miss true action drop
# tc filter add dev swp1 egress proto all handle 103 pref 3 flower src_mac 00:11:22:33:44:55 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter replace dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:01:02:03:04:05 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter del dev swp1 egress proto all handle 103 pref 3 flower
# tc filter del dev swp1 egress proto all handle 102 pref 2 flower
# tc filter del dev swp1 egress proto all handle 101 pref 1 flower
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the 'FLOW_DISSECTOR_KEY_META' key with a new 'l2_miss' field and
populate it from a field with the same name in the tc skb extension.
This field is set by the bridge driver for packets that incur an FDB or
MDB miss.
The next patch will extend the flower classifier to be able to match on
layer 2 misses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For EVPN non-DF (Designated Forwarder) filtering we need to be able to
prevent decapsulated traffic from being flooded to a multi-homed host.
Filtering of multicast and broadcast traffic can be achieved using the
following flower filter:
# tc filter add dev bond0 egress pref 1 proto all flower indev vxlan0 dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 action drop
Unlike broadcast and multicast traffic, it is not currently possible to
filter unknown unicast traffic. The classification into unknown unicast
is performed by the bridge driver, but is not visible to other layers
such as tc.
Solve this by adding a new 'l2_miss' bit to the tc skb extension. Clear
the bit whenever a packet enters the bridge (received from a bridge port
or transmitted via the bridge) and set it if the packet did not match an
FDB or MDB entry. If there is no skb extension and the bit needs to be
cleared, then do not allocate one as no extension is equivalent to the
bit being cleared. The bit is not set for broadcast packets as they
never perform a lookup and therefore never incur a miss.
A bit that is set for every flooded packet would also work for the
current use case, but it does not allow us to differentiate between
registered and unregistered multicast traffic, which might be useful in
the future.
To keep the performance impact to a minimum, the marking of packets is
guarded by the 'tc_skb_ext_tc' static key. When 'false', the skb is not
touched and an skb extension is not allocated. Instead, only a
5 bytes nop is executed, as demonstrated below for the call site in
br_handle_frame().
Before the patch:
```
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37b09: 49 c7 44 24 28 00 00 movq $0x0,0x28(%r12)
c37b10: 00 00
p = br_port_get_rcu(skb->dev);
c37b12: 49 8b 44 24 10 mov 0x10(%r12),%rax
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37b17: 49 c7 44 24 30 00 00 movq $0x0,0x30(%r12)
c37b1e: 00 00
c37b20: 49 c7 44 24 38 00 00 movq $0x0,0x38(%r12)
c37b27: 00 00
```
After the patch (when static key is disabled):
```
memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
c37c29: 49 c7 44 24 28 00 00 movq $0x0,0x28(%r12)
c37c30: 00 00
c37c32: 49 8d 44 24 28 lea 0x28(%r12),%rax
c37c37: 48 c7 40 08 00 00 00 movq $0x0,0x8(%rax)
c37c3e: 00
c37c3f: 48 c7 40 10 00 00 00 movq $0x0,0x10(%rax)
c37c46: 00
#ifdef CONFIG_HAVE_JUMP_LABEL_HACK
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
{
asm_volatile_goto("1:"
c37c47: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
br_tc_skb_miss_set(skb, false);
p = br_port_get_rcu(skb->dev);
c37c4c: 49 8b 44 24 10 mov 0x10(%r12),%rax
```
Subsequent patches will extend the flower classifier to be able to match
on the new 'l2_miss' bit and enable / disable the static key when
filters that match on it are added / deleted.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now when the original ops variable is removed, introduce it again
but this time for devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move port_fn_hw_addr_get/set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In devlink, some of the objects have separate ops registered alongside
with the object itself. Port however have ops in devlink_ops structure.
For drivers what register multiple kinds of ports with different ops
this is not convenient. Introduce devlink_port_ops and a set
of functions that allow drivers to pass ops pointer during
port registration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "len" variable needs to be signed for the error handling to work
correctly.
Fixes: 2e910b9532 ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/366861a7-87c8-4bbf-9101-69dd41021d07@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZHEm+wAKCRDbK58LschI
gyIKAQCqO7B4sIu8hYVxBTwfHV2tIuXSMSCV4P9e78NUOPcO2QEAvLP/WVSjB0Bm
vpyTKKM22SpZvPe/jSp52j6t20N+qAc=
=HFxD
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.
Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d13e ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").
However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.
The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls. This is can be prevented by properly prioritising the
tasks within the system.
Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.
Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hz3D
-----END PGP SIGNATURE-----
Merge tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.
This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit c67b85558f ("ipv6: tcp: send consistent autoflowlabel in
TIME_WAIT state") made the socket txhash also available in TIME_WAIT
sockets but for IPv6 only. Make it available for IPv4 too as we'll use
it in later commits.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If user space never calls DONE, sock->file's reference count remains
elevated. Enable sock->file to be freed eventually in this case.
Reported-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
trace_handshake_cmd_done_err() simply records the pointer in @req,
so initializing it to NULL is sufficient and safe.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If get_unused_fd_flags() fails, we ended up calling fput(sock->file)
twice.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
handshake_req_submit() now verifies that the socket has a file.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZG4AiAAKCRDbK58LschI
g+xlAQCmefGbDuwPckZLnomvt6gl4bkIjs7kc1ySbG9QBnaInwD/WyrJaQIPijuD
qziHPAyx+MEgPseFU1b7Le35SZ66IwM=
=s4R1
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: c61a404325 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.
Now that the scope is determined by ip_sendmsg_scope(), we need to
check its result to set the 'connected' variable.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.
The MSG_DONTROUTE and SOCK_LOCALROUTE cases were already handled by
raw_sendmsg() (SOCK_LOCALROUTE was handled by the RT_CONN_FLAGS*()
macros called by get_rtconn_flags()). However, opt.is_strictroute
wasn't taken into account. Therefore, a side effect of this patch is to
now honour opt.is_strictroute, and thus align raw_sendmsg() with
ping_v4_sendmsg() and udp_sendmsg().
Since raw_sendmsg() was the only user of get_rtconn_flags(), we can now
remove this function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
