Commit graph

2272 commits

Author SHA1 Message Date
Elad Grupi
bac04454ef nvmet-tcp: fix kmap leak when data digest in use
When data digest is enabled we should unmap pdu iovec before handling
the data digest pdu.

Signed-off-by: Elad Grupi <elad.grupi@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:18 +01:00
Sagi Grimberg
d218a8a300 nvmet: don't check iosqes,iocqes for discovery controllers
From the base spec, Figure 78:

  "Controller Configuration, these fields are defined as parameters to
   configure an "I/O Controller (IOC)" and not to configure a "Discovery
   Controller (DC).

   ...
   If the controller does not support I/O queues, then this field shall
   be read-only with a value of 0h

Just perform this check for I/O controllers.

Fixes: a07b4970f4 ("nvmet: add a generic NVMe target")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:02 +01:00
Sagi Grimberg
c4c6df5fc8 nvme-rdma: fix possible hang when failing to set io queues
We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues.  If we
happen to fail setting the queue count for any reason, we should not allow
this to be a successful reconnect as I/O has no chance in going through.
Instead just fail and schedule another reconnect.

Reported-by: Chao Leng <lengchao@huawei.com>
Fixes: 7110230719 ("nvme-rdma: add a NVMe over Fabrics RDMA host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:01 +01:00
Sagi Grimberg
72f572428b nvme-tcp: fix possible hang when failing to set io queues
We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues.  If we
happen to fail setting the queue count for any reason, we should not
allow this to be a successful reconnect as I/O has no chance in going
through. Instead just fail and schedule another reconnect.

Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:01 +01:00
Sagi Grimberg
bb83337058 nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
For our pure advisory use-case, we only rely on this call as a hint, so
fix the warning complaints of using the smp_processor_id variants with
preemption enabled.

Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Fixes: ada8317721 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:01 +01:00
Sagi Grimberg
fd0823f405 nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
When the controller sends us a 0-length r2t PDU we should not attempt to
try to set up a h2cdata PDU but rather conclude that this is a buggy
controller (forward progress is not possible) and simply fail it
immediately.

Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-18 05:39:01 +01:00
Christoph Hellwig
b94e8cd2e6 nvme: fix Write Zeroes limitations
We voluntarily limit the Write Zeroes sizes to the MDTS value provided by
the hardware, but currently get the units wrong, so fix that.

Fixes: 6e02318eae ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
2021-03-18 05:38:49 +01:00
Christoph Hellwig
985c5a329d nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT
To avoid an error recovery deadlock where the keep alive work is waiting
for a request and thus can't be flushed to make progress for tearing down
the controller.  Also print the error code returned from
blk_mq_alloc_request to help debugging any future issues in this code.

Based on an earlier patch from Hannes Reinecke <hare@suse.de>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18 05:38:48 +01:00
Christoph Hellwig
06c3c3365b nvme: merge nvme_keep_alive into nvme_keep_alive_work
Merge nvme_keep_alive into its only caller to prepare for additional
changes to this code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18 05:38:48 +01:00
Christoph Hellwig
ed01fee283 nvme-fabrics: only reserve a single tag
Fabrics drivers currently reserve two tags on the admin queue.  But
given that the connect command is only run on a freshly created queue
or after all commands have been force aborted we only need to reserve
a single tag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
2021-03-18 05:38:48 +01:00
Christoph Hellwig
f4f9fc29e5 nvme: fix the nsid value to print in nvme_validate_or_alloc_ns
ns can be NULL at this point, and my move of the check from
the original patch by Chaitanya broke this.

Fixes: 0ec84df495 ("nvme-core: check ctrl css before setting up zns")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-12 13:17:45 -07:00
Jens Axboe
d4b64fd702 nvme fixes for 5.12:
- one more quirk (Dmitry Monakhov)
  - fix max_zone_append_sectors initialization (Chaitanya Kulkarni)
  - nvme-fc reset/create race fix (James Smart)
  - fix status code on aborts/resets (Hannes Reinecke)
  - fix the CSS check for ZNS namespaces (Chaitanya Kulkarni)
  - fix a use after free in a debug printk in nvme-rdma (Lv Yunlong)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmBLMlwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNVLA//aay9+Jq/BTwXG69249PshsvGpw5EVpaNp5YIwxyM
 ehC7AW5vm+1wg3b8X1O+sRhJ+PSKs3hbzUxoVWsGwj4RxJB0OPRnthjtcaGz2Ly3
 5q/IGlA6Qxk0cHLRqTg+l3n4d1ctPpt+wS2IcTJpgh8Vmqj+/H3+jD26UjhvLySr
 I9zgtl27STC8nwQwWYOXvbLql3eRzilZNd4qydnZIlcj/+CW3MGehiFlaVKsUQP1
 FJwx8LVHNU3V6n21eT99Xa9Lu/vWRjPQEyEBLV9iZ/dD2JVS1Q4TI/hwtTjFLZvi
 CVw1uu8HfSlYE/lA4wclPfljdZLUt2chjVG5S/lqJJmmoy7J6xf4b0hNI2yLGjft
 yKZB+vi+nKKoj3OLiy+LpopXSb23BMDlis1EqL/rXtU1JXsonDcsTAdscACvTHTL
 2aVbyHQ2hvNOs6L7GkHGEwu7nNE31tG7+DOXnjHwfq3j2mTnHu2AniAF9llG1NuC
 nbIQZQxRDdakknJsZU8YWG3rkOFUDLs9z2V3O5bs8KlTgYTkCut0Vtgdx2vZ2iVF
 jTmbEuFyK6pcWgFEFk6IP4LawJPNpozo8NQZGMUOp3ym8CXm/NHuxj1R3w8LcAH6
 OvmQWo6AcUNyaXNhVNPADqmnY2ZDjYC6/KWoMrg/YESCYXqfpMvXfArVbyYoU9yD
 61U=
 =LkdO
 -----END PGP SIGNATURE-----

Merge tag 'nvme-5.12-2021-03-12' of git://git.infradead.org/nvme into block-5.12

Pull NVMe fixes from Christoph:

"nvme fixes for 5.12:

 - one more quirk (Dmitry Monakhov)
 - fix max_zone_append_sectors initialization (Chaitanya Kulkarni)
 - nvme-fc reset/create race fix (James Smart)
 - fix status code on aborts/resets (Hannes Reinecke)
 - fix the CSS check for ZNS namespaces (Chaitanya Kulkarni)
 - fix a use after free in a debug printk in nvme-rdma (Lv Yunlong)"

* tag 'nvme-5.12-2021-03-12' of git://git.infradead.org/nvme:
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
  nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
  nvme-core: check ctrl css before setting up zns
  nvme-fc: fix racing controller reset and create association
  nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
  nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
  nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
  nvme: simplify error logic in nvme_validate_ns()
  nvme: set max_zone_append_sectors nvme_revalidate_zones
2021-03-12 07:21:15 -07:00
Christoph Hellwig
a8affc03a9 block: rename BIO_MAX_PAGES to BIO_MAX_VECS
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed.  Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-11 07:47:48 -07:00
Dmitry Monakhov
abbb5f5929 nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
This adds a quirk for Samsung PM1725a drive which fixes timeouts and
I/O errors due to the fact that the controller does not properly
handle the Write Zeroes command, dmesg log:

nvme nvme0: I/O 528 QID 10 timeout, aborting
nvme nvme0: I/O 529 QID 10 timeout, aborting
nvme nvme0: I/O 530 QID 10 timeout, aborting
nvme nvme0: I/O 531 QID 10 timeout, aborting
nvme nvme0: I/O 532 QID 10 timeout, aborting
nvme nvme0: I/O 533 QID 10 timeout, aborting
nvme nvme0: I/O 534 QID 10 timeout, aborting
nvme nvme0: I/O 535 QID 10 timeout, aborting
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: Abort status: 0x0
nvme nvme0: I/O 528 QID 10 timeout, reset controller
nvme nvme0: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10
nvme nvme0: Device not ready; aborting reset, CSTS=0x3
nvme nvme0: Device not ready; aborting reset, CSTS=0x3
nvme nvme0: Removing after probe failure status: -19
nvme0n1: detected capacity change from 6251233968 to 0
blk_update_request: I/O error, dev nvme0n1, sector 32776 op 0x1:(WRITE) flags 0x3000 phys_seg 6 prio class 0
blk_update_request: I/O error, dev nvme0n1, sector 113319936 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 1, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113319680 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 2, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113319424 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 3, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113319168 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 4, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113318912 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 5, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113318656 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
Buffer I/O error on dev nvme0n1p2, logical block 6, lost async page write
blk_update_request: I/O error, dev nvme0n1, sector 113318400 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
blk_update_request: I/O error, dev nvme0n1, sector 113318144 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
blk_update_request: I/O error, dev nvme0n1, sector 113317888 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0

Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:54 +01:00
Lv Yunlong
abec6561fc nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
In nvmet_rdma_write_data_done, rsp is recoverd by wc->wr_cqe and freed by
nvmet_rdma_release_rsp(). But after that, pr_info() used the freed
chunk's member object and could leak the freed chunk address with
wc->wr_cqe by computing the offset.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:35 +01:00
Chaitanya Kulkarni
0ec84df495 nvme-core: check ctrl css before setting up zns
Ensure multiple Command Sets are supported before starting to setup a
ZNS namespace.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: move the check around a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:35 +01:00
James Smart
f20ef34d71 nvme-fc: fix racing controller reset and create association
Recent patch to prevent calling __nvme_fc_abort_outstanding_ios in
interrupt context results in a possible race condition. A controller
reset results in errored io completions, which schedules error
work. The change of error work to a work element allows it to fire
after the ctrl state transition to NVME_CTRL_CONNECTING, causing
any outstanding io (used to initialize the controller) to fail and
cause problems for connect_work.

Add a state check to only schedule error work if not in the RESETTING
state.

Fixes: 19fce0470f ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context")
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:35 +01:00
Hannes Reinecke
ae3afe6308 nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
When a command has been aborted we should return NVME_SC_HOST_ABORTED_CMD
to be consistent with the other transports.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:34 +01:00
Hannes Reinecke
3c7aafbc8d nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
nvme_fc_terminate_exchange() is being called when exchanges are
being deleted, and as such we should be setting the NVME_REQ_CANCELLED
flag to have identical behaviour on all transports.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:34 +01:00
Hannes Reinecke
d358938198 nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
NVME_REQ_CANCELLED is translated into -EINTR in nvme_submit_sync_cmd(),
so we should be setting this flags during nvme_cancel_request() to
ensure that the callers to nvme_submit_sync_cmd() will get the correct
error code when the controller is reset.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:34 +01:00
Hannes Reinecke
d95c1f4179 nvme: simplify error logic in nvme_validate_ns()
We only should remove namespaces when we get fatal error back from
the device or when the namespace IDs have changed.
So instead of painfully masking out error numbers which might indicate
that the error should be ignored we could use an NVME status code
to indicated when the namespace should be removed.
That simplifies the final logic and makes it less error-prone.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:34 +01:00
Chaitanya Kulkarni
e6ad55988b nvme: set max_zone_append_sectors nvme_revalidate_zones
The chunk_sectors value affects max_zone_append_sectors.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-11 11:48:34 +01:00
Max Gurtovoy
d9f273b758 nvmet: model_number must be immutable once set
In case we have already established connection to nvmf target, it
shouldn't be allowed to change the model_number. E.g. if someone will
identify ctrl and get model_number of "my_model" later on will change
the model_numbel via configfs to "my_new_model" this will break the NVMe
specification for "Get Log Page – Persistent Event Log" that refers to
Model Number as: "This field contains the same value as reported in the
Model Number field of the Identify Controller data structure, bytes
63:24."

Although it doesn't mentioned explicitly that this field can't be
changed, we can assume it.

So allow setting this field only once: using configfs or in the first
identify ctrl operation.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-05 13:41:03 +01:00
Martin George
32feb6de47 nvme-fabrics: fix kato initialization
Currently kato is initialized to NVME_DEFAULT_KATO for both
discovery & i/o controllers. This is a problem specifically
for non-persistent discovery controllers since it always ends
up with a non-zero kato value. Fix this by initializing kato
to zero instead, and ensuring various controllers are assigned
appropriate kato values as follows:

non-persistent controllers  - kato set to zero
persistent controllers      - kato set to NVMF_DEV_DISC_TMO
                              (or any positive int via nvme-cli)
i/o controllers             - kato set to NVME_DEFAULT_KATO
                              (or any positive int via nvme-cli)

Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-05 13:41:03 +01:00
Daniel Wagner
78570f8873 nvme-hwmon: Return error code when registration fails
The hwmon pointer wont be NULL if the registration fails. Though the
exit code path will assign it to ctrl->hwmon_device. Later
nvme_hwmon_exit() will try to free the invalid pointer. Avoid this by
returning the error code from hwmon_device_register_with_info().

Fixes: ed7770f662 ("nvme/hwmon: rework to avoid devm allocation")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-05 13:41:03 +01:00
Pascal Terjan
6e6a6828c5 nvme-pci: add quirks for Lexar 256GB SSD
Add the NVME_QUIRK_NO_NS_DESC_LIST and NVME_QUIRK_IGNORE_DEV_SUBNQN
quirks for this buggy device.

Reported and tested in https://bugs.mageia.org/show_bug.cgi?id=28417

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-05 13:41:03 +01:00
Zoltán Böszörményi
dc22c1c058 nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
My 2TB SKC2000 showed the exact same symptoms that were provided
in 538e4a8c57 ("nvme-pci: avoid the deepest sleep state on
Kingston A2000 SSDs"), i.e. a complete NVME lockup that needed
cold boot to get it back.

According to some sources, the A2000 is simply a rebadged
SKC2000 with a slightly optimized firmware.

Adding the SKC2000 PCI ID to the quirk list with the same workaround
as the A2000 made my laptop survive a 5 hours long Yocto bootstrap
buildfest which reliably triggered the SSD lockup previously.

Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-03-05 13:41:03 +01:00
Julian Einwag
5e112d3fb8 nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
The kernel fails to fully detect these SSDs, only the character devices
are present:

[   10.785605] nvme nvme0: pci function 0000:04:00.0
[   10.876787] nvme nvme1: pci function 0000:81:00.0
[   13.198614] nvme nvme0: missing or invalid SUBNQN field.
[   13.198658] nvme nvme1: missing or invalid SUBNQN field.
[   13.206896] nvme nvme0: Shutdown timeout set to 20 seconds
[   13.215035] nvme nvme1: Shutdown timeout set to 20 seconds
[   13.225407] nvme nvme0: 16/0/0 default/read/poll queues
[   13.233602] nvme nvme1: 16/0/0 default/read/poll queues
[   13.239627] nvme nvme0: Identify Descriptors failed (8194)
[   13.246315] nvme nvme1: Identify Descriptors failed (8194)

Adding the NVME_QUIRK_NO_NS_DESC_LIST fixes this problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205679
Signed-off-by: Julian Einwag <jeinwag-nvme@marcapo.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-03-05 13:40:55 +01:00
Linus Torvalds
3ab6608e66 block-5.12-2021-02-27
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmA6njIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprolD/9zWti9LsZvA7yE+PhVwrwF3CsNzLfQlClw
 99HaA7HxtAc/VLJrnD/SubhCAPdBC5B2xPv6faajdwF2iUR3Rr1Uc93CQ3uP2KKq
 kvm6ALTpzPTMI6YSABhY74sg9BkkoDbMo54JQYVQPleiE+5eDLbuFZck6ObfUHyY
 a4aaImlndWp/t14GzrClL4hucF+5KJy846P+QCVclkh0yl8xSsqZ5LIFU7tu3iQb
 HpZ5HKLT/2ma/EOr3wknnsIe97AUZQU0q5aMparhYlm+qR511eop3QXx850FL/oC
 tEGceKLij6qazmkiocKVzML8Fs+Y9/a4vCMjLCScWJmzDlmKdlH2uudeahN6b9Hm
 15qRQHOjl1Hc2bdr5ZVn87nq9RWhSm18C+SRMwOKHCOnEhwxqM3RjRfAgj4BJ6QB
 PFbFqdY+8Y1YLPFmn9hph72ePaEcN4L2IXW6TI/WX8mot8ODAnkq9Hr38dKwzO+i
 0mon6DVyJKKho6XwvVu5IYurkR2beQprjeVUxwZjjT6DxUgsc+J6itK5LDHFSkeZ
 qZlXn5Di8MkiXg0DFJYDQiFXnO0Z5GlRWOGPVfBaOr3x+1dqzDdHGw4oz1oGqvnr
 GNNYCsYIpDGm7eauX5lqL5MUFpjqRCceXy5JSHPhnWWw617nYkr4H9jdsV9HiTX1
 tQFx05QW3w==
 =ccMs
 -----END PGP SIGNATURE-----

Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:
 "A few stragglers (and one due to me missing it originally), and fixes
  for changes in this merge window mostly. In particular:

   - blktrace cleanups (Chaitanya, Greg)

   - Kill dead blk_pm_* functions (Bart)

   - Fixes for the bio alloc changes (Christoph)

   - Fix for the partition changes (Christoph, Ming)

   - Fix for turning off iopoll with polled IO inflight (Jeffle)

   - nbd disconnect fix (Josef)

   - loop fsync error fix (Mauricio)

   - kyber update depth fix (Yang)

   - max_sectors alignment fix (Mikulas)

   - Add bio_max_segs helper (Matthew)"

* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
  block: Add bio_max_segs
  blktrace: fix documentation for blk_fill_rw()
  block: memory allocations in bounce_clone_bio must not fail
  block: remove the gfp_mask argument to bounce_clone_bio
  block: fix bounce_clone_bio for passthrough bios
  block-crypto-fallback: use a bio_set for splitting bios
  block: fix logging on capacity change
  blk-settings: align max_sectors on "logical_block_size" boundary
  block: reopen the device in blkdev_reread_part
  block: don't skip empty device in in disk_uevent
  blktrace: remove debugfs file dentries from struct blk_trace
  nbd: handle device refs for DESTROY_ON_DISCONNECT properly
  kyber: introduce kyber_depth_updated()
  loop: fix I/O error on fsync() in detached loop devices
  block: fix potential IO hang when turning off io_poll
  block: get rid of the trace rq insert wrapper
  blktrace: fix blk_rq_merge documentation
  blktrace: fix blk_rq_issue documentation
  blktrace: add blk_fill_rwbs documentation comment
  block: remove superfluous param in blk_fill_rwbs()
  ...
2021-02-28 11:23:38 -08:00
Matthew Wilcox (Oracle)
5f7136db82 block: Add bio_max_segs
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same.  Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-26 15:49:51 -07:00
Linus Torvalds
ef9856a734 Merge branch 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Two memory encryption related patches (SWIOTLB is enabled by default
  for AMD-SEV):

   - Add support for alignment so that NVME can properly work

   - Keep track of requested DMA buffers length, as underlaying hardware
     devices can trip SWIOTLB to bounce too much and crash the kernel

  And a tiny fix to use proper APIs in drivers"

* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Validate bounce size in the sync/unmap path
  nvme-pci: set min_align_mask
  swiotlb: respect min_align_mask
  swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
  swiotlb: refactor swiotlb_tbl_map_single
  swiotlb: clean up swiotlb_tbl_unmap_single
  swiotlb: factor out a nr_slots helper
  swiotlb: factor out an io_tlb_offset helper
  swiotlb: add a IO_TLB_SIZE define
  driver core: add a min_align_mask field to struct device_dma_parameters
  sdhci: stop poking into swiotlb internals
2021-02-26 13:59:32 -08:00
Jianxiong Gao
3d2d861eb0 nvme-pci: set min_align_mask
The PRP addressing scheme requires all PRP entries except for the
first one to have a zero offset into the NVMe controller pages (which
can be different from the Linux PAGE_SIZE).  Use the min_align_mask
device parameter to ensure that swiotlb does not change the address
of the buffer modulo the device page size to ensure that the PRPs
won't be malformed.

Signed-off-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jianxiong Gao <jxgao@google.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-26 10:52:50 -05:00
Linus Torvalds
9820b4dca0 for-5.12/drivers-2021-02-17
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAtnZ8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpoOhD/9TZJN6mgvlmO2zuNlZwko0jD+HUYNRHdfa
 UiZhKs55ShlT/Wd8MMLcmMU2/+iztq4c/ZLK9eS7NHgKTu3GbgsICEZK+XLSTVJh
 gCwwEnY2dnBAIwBWxLeDG04DQvcwnOhVN1OSmhFbXG3dpElXSyfEjx00niGtl0tE
 5YtvmStpqkC0tHlxq8CMyyfaL1ODGmBK2uhDeQCO12SXIgKondJUaI3/H1l1dC5t
 +yg4PsSLqezo0oWmqdTEE7lcEJs4GK1ZOhIBLtWe6tl/zaVD6DuzJL83pChm8vF+
 qV4LCpJL0wUL7IG601AemFcUmEg34oC0FD6GYYhXxVOrlk43V6AfkycZ2rljNRop
 /+Ff+CmXfWPAwSfJi/vDlveCvgyAJNMpv4/GwynUM1563v3TYy0YjT6Jlz6M3TUn
 pS0MW7iUHj3t36U3JvcYnITqTPSfTMtYMOsWDx+V4+E9iGsQF1d7KZlCPMvjWAI2
 c3QuWjitXd10BZ2qUvSzAg6piv1taBKJxg1PsGlu707mHZp5J6VPAkYQn4rFgjua
 uCBbmRQCDF/wJ02IBmBUiMPP64UGbkhr+O3MILPqki967BdDDrLzjTs4e5zbMeu/
 qB9XRr1Yd95GCyS8I42OCC906NXrJ2R2E8dtV1XoASWGusL/wFZrLd1th8Uq8ibb
 Os+G4t1Qug==
 =vx6U
 -----END PGP SIGNATURE-----

Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:

 - Remove the skd driver. It's been EOL for a long time (Damien)

 - NVMe pull requests
      - fix multipath handling of ->queue_rq errors (Chao Leng)
      - nvmet cleanups (Chaitanya Kulkarni)
      - add a quirk for buggy Amazon controller (Filippo Sironi)
      - avoid devm allocations in nvme-hwmon that don't interact well
        with fabrics (Hannes Reinecke)
      - sysfs cleanups (Jiapeng Chong)
      - fix nr_zones for multipath (Keith Busch)
      - nvme-tcp crash fix for no-data commands (Sagi Grimberg)
      - nvmet-tcp fixes (Sagi Grimberg)
      - add a missing __rcu annotation (Christoph)
      - failed reconnect fixes (Chao Leng)
      - various tracing improvements (Michal Krakowiak, Johannes
        Thumshirn)
      - switch the nvmet-fc assoc_list to use RCU protection (Leonid
        Ravich)
      - resync the status codes with the latest spec (Max Gurtovoy)
      - minor nvme-tcp improvements (Sagi Grimberg)
      - various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
        Kulkarni, Israel Rukshin)

 - Floppy O_NDELAY fix (Denis)

 - MD pull request
      - raid5 chunk_sectors fix (Guoqing)

 - Use lore links (Kees)

 - Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)

 - loop lock scaling (Pavel)

 - mtip32xx PCI fixes (Bjorn)

 - bcache fixes (Kai, Dongdong)

 - Misc fixes (Tian, Yang, Guoqing, Joe, Andy)

* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
  lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
  lightnvm: fix unnecessary NULL check warnings
  nvme-tcp: fix crash triggered with a dataless request submission
  block: Replace lkml.org links with lore
  nbd: Convert to DEFINE_SHOW_ATTRIBUTE
  nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
  nvme-hwmon: rework to avoid devm allocation
  nvmet: remove else at the end of the function
  nvmet: add nvmet_req_subsys() helper
  nvmet: use min of device_path and disk len
  nvmet: use invalid cmd opcode helper
  nvmet: use invalid cmd opcode helper
  nvmet: add helper to report invalid opcode
  nvmet: remove extra variable in id-ns handler
  nvmet: make nvmet_find_namespace() req based
  nvmet: return uniform error for invalid ns
  nvmet: set status to 0 in case for invalid nsid
  nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
  nvme-multipath: set nr_zones for zoned namespaces
  nvmet-tcp: fix potential race of tcp socket closing accept_work
  ...
2021-02-21 11:06:54 -08:00
Linus Torvalds
582cd91f69 for-5.12/block-2021-02-17
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAtmIwQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplzLEAC5O+3rBM8QuiJdo39Yppmuw4hDJ6hOKynP
 EJQLKQQi0VfXgU+MprGvcbpFYmNbgICvUICQkEzJuk++kPCu/BJtJz0yErQeLgS+
 RdXiPV6enbF7iRML5TVRTr1q/z7sJMXcIIJ8Pz/rU/JNfGYExVd0WfnEY9mp1jOt
 Bl9V+qyTazdP+Ma4+uEPatSayqcdi1rxB5I+7v/sLiOvKZZWkaRZjUZ/mxAjUfvK
 dBOOPjMygEo3tCLkIyyA6lpLvr1r+SUZhLuebRLEKa3To3TW6RtoG0qwpKmI2iKw
 ylLeVLB60nM9RUxjflVOfBsHxz1bDg5Ve86y5nCjQd4Jo8x1c4DnecyGE5/Tu8Rg
 rgbsfD6nFWzhDCvcZT0XrfQ4ZAjIL2IfT+ypQiQ6UlRd3hvIKRmzWMkjuH2svr0u
 ey9Kq+lYerI4cM0F3W73gzUKdIQOuCzBCYxQuSQQomscBa7FCInyU192dAI9Aj6l
 Yd06mgKu6qCx6zLv6JfpBqaBHZMwyGE4dmZgPQFuuwO+b4N+Ck3Jm5fzEzw/xIxQ
 wdo/DlsAl60BXentB6FByGBJaCjVdSymRqN/xNCAbFKCjmr6TLBuXPfg1gYYO7xC
 VOcVjWe8iN3wWHZab3t2mxMKH9B9B/KKzIhu6TNHSmgtQ5paZPRCBx995pDyRw26
 WC22RGC2MA==
 =os1E
 -----END PGP SIGNATURE-----

Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Another nice round of removing more code than what is added, mostly
  due to Christoph's relentless pursuit of tech debt removal/cleanups.
  This pull request contains:

   - Two series of BFQ improvements (Paolo, Jan, Jia)

   - Block iov_iter improvements (Pavel)

   - bsg error path fix (Pan)

   - blk-mq scheduler improvements (Jan)

   - -EBUSY discard fix (Jan)

   - bvec allocation improvements (Ming, Christoph)

   - bio allocation and init improvements (Christoph)

   - Store bdev pointer in bio instead of gendisk + partno (Christoph)

   - Block trace point cleanups (Christoph)

   - hard read-only vs read-only split (Christoph)

   - Block based swap cleanups (Christoph)

   - Zoned write granularity support (Damien)

   - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"

* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
  mm: simplify swapdev_block
  sd_zbc: clear zone resources for non-zoned case
  block: introduce blk_queue_clear_zone_settings()
  zonefs: use zone write granularity as block size
  block: introduce zone_write_granularity limit
  block: use blk_queue_set_zoned in add_partition()
  nullb: use blk_queue_set_zoned() to setup zoned devices
  nvme: cleanup zone information initialization
  block: document zone_append_max_bytes attribute
  block: use bi_max_vecs to find the bvec pool
  md/raid10: remove dead code in reshape_request
  block: mark the bio as cloned in bio_iov_bvec_set
  block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
  block: remove a layer of indentation in bio_iov_iter_get_pages
  block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
  block: remove the 1 and 4 vec bvec_slabs entries
  block: streamline bvec_alloc
  block: factor out a bvec_alloc_gfp helper
  block: move struct biovec_slab to bio.c
  block: reuse BIO_INLINE_VECS for integrity bvecs
  ...
2021-02-21 11:02:48 -08:00
Sagi Grimberg
e11e511617 nvme-tcp: fix crash triggered with a dataless request submission
write-zeros has a bio, but does not have any data buffers associated
with it. Hence should not initialize the request iter for it (which
attempts to reference the bi_io_vec (and crash).
--
 run blktests nvme/012 at 2021-02-05 21:53:34
 BUG: kernel NULL pointer dereference, address: 0000000000000008
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 15 PID: 12069 Comm: kworker/15:2H Tainted: G S        I       5.11.0-rc6+ #1
 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020
 Workqueue: kblockd blk_mq_run_work_fn
 RIP: 0010:nvme_tcp_init_iter+0x7d/0xd0 [nvme_tcp]
 RSP: 0018:ffffbd084447bd18 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffffa0bba9f3ce80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000002000000
 RBP: ffffa0ba8ac6fec0 R08: 0000000002000000 R09: 0000000000000000
 R10: 0000000002800809 R11: 0000000000000000 R12: 0000000000000000
 R13: ffffa0bba9f3cf90 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffa0c9ff9c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 00000001c9c6c005 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  nvme_tcp_queue_rq+0xef/0x330 [nvme_tcp]
  blk_mq_dispatch_rq_list+0x11c/0x7c0
  ? blk_mq_flush_busy_ctxs+0xf6/0x110
  __blk_mq_sched_dispatch_requests+0x12b/0x170
  blk_mq_sched_dispatch_requests+0x30/0x60
  __blk_mq_run_hw_queue+0x2b/0x60
  process_one_work+0x1cb/0x360
  ? process_one_work+0x360/0x360
  worker_thread+0x30/0x370
  ? process_one_work+0x360/0x360
  kthread+0x116/0x130
  ? kthread_park+0x80/0x80
  ret_from_fork+0x1f/0x30
--

Fixes: cb9b870fba ("nvme-tcp: fix wrong setting of request iov_iter")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-11 08:04:51 +01:00
Filippo Sironi
4bdf260362 nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
Some Amazon NVMe controllers do not follow the NVMe specification
and are limited to 48-bit DMA addresses.  Add a quirk to force
bounce buffering if needed and limit the IOVA allocation for these
devices.

This affects all current Amazon NVMe controllers that expose EBS
volumes (0x0061, 0x0065, 0x8061) and local instance storage
(0xcd00, 0xcd01, 0xcd02).

Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:06 +01:00
Hannes Reinecke
ed7770f662 nvme-hwmon: rework to avoid devm allocation
The original design to use device-managed resource allocation
doesn't really work as the NVMe controller has a vastly different
lifetime than the hwmon sysfs attributes, causing warning about
duplicate sysfs entries upon reconnection.
This patch reworks the hwmon allocation to avoid device-managed
resource allocation, and uses the NVMe controller as parent for
the sysfs attributes.

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Enzo Matsumiya <ematsumiya@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:06 +01:00
Chaitanya Kulkarni
295a39f5a5 nvmet: remove else at the end of the function
The function nvmet_parse_io_cmd() returns value from
nvmet_file_parse_io_cmd() or nvmet_bdev_parse_io_cmd() based on which
backend is set for the request. Remove the else and just return the
value from nvmet_bdev_parse_io_cmd().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:06 +01:00
Chaitanya Kulkarni
20c2c3bb83 nvmet: add nvmet_req_subsys() helper
Just like what we have to get the passthru ctrl from the req, add an
helper to get the subsystem associated with the nvmet_req() instead
of open coding the chain of structures.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:05 +01:00
Chaitanya Kulkarni
d86481e924 nvmet: use min of device_path and disk len
In function __assign_req_name() instead of using the DEVICE_NAME_LEN in
strncpy() use min of DISK_NAME_LEN and strlen(req->ns->device_path).

This is needed to turn off the following warnings:-

In file included from drivers/nvme/target/core.c:14:
In function ‘__assign_req_name’,
    inlined from ‘trace_event_raw_event_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘perf_trace_nvmet_req_complete’ at drivers/nvme/target/./trace.h💯1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘perf_trace_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘trace_event_raw_event_nvmet_req_complete’ at drivers/nvme/target/./trace.h💯1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:05 +01:00
Chaitanya Kulkarni
07116ea50f nvmet: use invalid cmd opcode helper
In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Use the previously introduced helper in the passthru backend to make the
error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:05 +01:00
Chaitanya Kulkarni
1c2c761368 nvmet: use invalid cmd opcode helper
In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Use the previously introduced helper in file backend to reduce the
duplicate code and make the error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:05 +01:00
Chaitanya Kulkarni
d81d57cf1b nvmet: add helper to report invalid opcode
In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Add an helper and use it in block device backend to keep the code
and error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:05 +01:00
Chaitanya Kulkarni
3999434b6c nvmet: remove extra variable in id-ns handler
In nvmet_execute_identify_ns() local variable ctrl is accessed only in
one place, remove that and directly use it from nvmet_req->sq->ctrl.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:04 +01:00
Chaitanya Kulkarni
3a1f7c79ae nvmet: make nvmet_find_namespace() req based
The six callers of nvmet_find_namespace() duplicate the error log page
update and status setting code for each call on failure.

All callers are nvmet requests based functions, so we can pass req
to the nvmet_find_namesapce() & derive ctrl from req, that'll allow us
to update the error log page in nvmet_find_namespace(). Now that we
pass the request we can also get rid of the local variable in
nvmet_find_namespace() and use the req->ns and return the error code.

Replace the ctrl parameter with nvmet_req for nvmet_find_namespace(),
centralize the error log page update for non allocated namesapces, and
return uniform error for non-allocated namespace.

The nvmet_find_namespace() takes nsid parameter which is from NVMe
commands structures such as get_log_page, identify, rw and common. All
these commands have same offset for the nsid field.

Derive nsid from req->cmd->common.nsid) & remove the extra parameter
from the nvmet_find_namespace().

Lastly now we associate the ns to the req parameter that we pass to the
nvmet_find_namespace(), rename nvmet_find_namespace() to
nvmet_req_find_ns().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:04 +01:00
Chaitanya Kulkarni
aa0aff604a nvmet: return uniform error for invalid ns
For nvmet_find_namespace() error case we have inconsistent error code
mapping in the function nvmet_get_smart_log_nsid() and
nvmet_set_feat_write_protect().

There is no point in retrying for the invalid namesapce from the host
side. Set the error code to the NVME_SC_INVALID_NS | NVME_SC_DNR which
matches what we have in nvmet_execute_identify_desclist().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:04 +01:00
Chaitanya Kulkarni
40244ad36b nvmet: set status to 0 in case for invalid nsid
For unallocated namespace in nvmet_execute_identify_ns() don't set the
status to NVME_SC_INVALID_NS, set it to zero.

Fixes: bffcd50778 ("nvmet: set right status on error in id-ns handler")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:04 +01:00
Christoph Hellwig
b5df8e79a2 nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
Make sparse happy after the recent conversion to RCU lookups.

Fixes: 4e2f02bf77 ("nvmet-fc: use RCU proctection for assoc_list")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
2021-02-10 16:38:04 +01:00
Keith Busch
73a1a2298f nvme-multipath: set nr_zones for zoned namespaces
The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.

Fixes: 240e6ee272 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:04 +01:00
Sagi Grimberg
0fbcfb089a nvmet-tcp: fix potential race of tcp socket closing accept_work
When we accept a TCP connection and allocate an nvmet-tcp queue we should
make sure not to fully establish it or reference it as the connection may
be already closing, which triggers queue release work, which does not
fence against queue establishment.

In order to address such a race, we make sure to check the sk_state and
contain the queue reference to be done underneath the sk_callback_lock
such that the queue release work correctly fences against it.

Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-10 16:38:03 +01:00