Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018
CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4
Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The buggy address belongs to the object at ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 6b9f34239b ("l2tp: fix races in tunnel creation")
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.
This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.
Fixes: 2303f994b3 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes: 20e61da7ff ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the
server on the guest, there will be a panic on a ThunderX2 (armv8a server):
[ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 463.718848] Mem abort info:
[ 463.718849] ESR = 0x96000044
[ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits
[ 463.718853] SET = 0, FnV = 0
[ 463.718854] EA = 0, S1PTW = 0
[ 463.718855] Data abort info:
[ 463.718856] ISV = 0, ISS = 0x00000044
[ 463.718857] CM = 0, WnR = 1
[ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000
[ 463.718861] [0000000000000000] pgd=0000000000000000
[ 463.718866] Internal error: Oops: 96000044 [#1] SMP
[...]
[ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139
[ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018
[ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO)
[ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719000] sp : ffff80002dbe3c40
[...]
[ 463.719025] Call trace:
[ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock]
[ 463.719041] vhost_worker+0x100/0x1a0 [vhost]
[ 463.719048] kthread+0x128/0x130
[ 463.719052] ret_from_fork+0x10/0x18
The race condition is as follows:
Task1 Task2
===== =====
__sock_release virtio_transport_recv_pkt
__vsock_release vsock_find_bound_socket (found sk)
lock_sock_nested
vsock_remove_sock
sock_orphan
sk_set_socket(sk, NULL)
sk->sk_shutdown = SHUTDOWN_MASK
...
release_sock
lock_sock
virtio_transport_recv_connecting
sk->sk_socket->state (panic!)
The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.
This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.
Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A fix for the recent change to how we restore non-volatile GPRs, which broke our
emulation of reading from the DSCR (Data Stream Control Register).
And a fix for the recent rewrite of interrupt/syscall exit in C, we need to
exclude KCOV from that code, otherwise it can lead to unrecoverable faults.
Thanks to:
Daniel Axtens.
-----BEGIN PGP SIGNATURE-----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=TXe7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
- Fix proving of mvebu chips without PWM
- Fix errorpath on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes
when flags are changed on lines.
- Fix a sleeping while holding spinlock in the mellanox
driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to
have IRQs on open drain lines flagged for output.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7SPXIACgkQQRCzN7AZ
XXNnZA//SEFQgIuzRXOVImqgPEa9Rb3v592UtHTWeDXkdm3pUbmW3FEDmL8f5oaB
naBCoCpcUSq8TTi3Ja60jeHt6clbBHUGYc//CgQWDaf5AjShUWLdcUOi6N3rmcZv
5h7csbHvuVBWVgPWhop6yOmhfYoTMbOnyOWGJDHn8f1oOmZnlfGJsCansHraZWBZ
ExQtmTiHlz89r8HIMvnRU1TloqTENqOca123WvBvJ1rdPaN7yKQkQaHl0p/hQWZb
sm3KgTI3PjBU8Ys5nitAUG0Dn85TPzHTnnOURmWRL4yQAg2pCwLUcDvMKeGHlUz8
ygLes55qdOKyiR1wsb2OlbL+LrDOOuU2v13Q6j7aNszDWYq3mxRDRaMqPIfSRFG9
JeYMqVdvkpk6cZsOQtvltjZlO8kD66OfffHrZfR1Amt7qqna+MoB09IXZ50X15d5
Cg6Ek8A/WKMPYILVgWzgkmm0o+lbtNpmB0TIEEFLwMwatllQNN2wW6/4OzT1wFau
kWY/TdlM29dgH/+Iqv6m1tJj8ONsMyTiY4Iogi6Irm8L8IVcYFaSAPVNJRZZOhso
wt2Lvh3MYEtzWPQdSTA7HuFmYohaCR6DbDjAodhLbnZdhrOeiJPljTvx1FnkiU46
G+bXSmzxkhzFgZnsRydnnutjugdlVYoU3ar/Sdh0WqyiAjc5D1g=
=NXVY
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
Add details on using pstore/blk, the new backend of pstore to record
dumps to block devices, in Documentation/admin-guide/pstore-blk.rst
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Support backend for console. To enable console backend, just make
console_size be greater than 0 and a multiple of 4096.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-5-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Implement a common set of APIs needed to support pstore storage zones,
based on how ramoops is designed. This will be used by pstore/blk with
the intention of migrating pstore/ram in the future.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-2-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently, it is only possible to get kmsg dumps for panic and oops,
or just panic, via "no-dump-oops". With "max-reason" it is possible to
dump messages for other kmsg_dump events, for example emerg and shutdown.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that pstore_register() can correctly pass max_reason to the kmesg
dump facility, introduce a new "max_reason" module parameter and
"max-reason" Device Tree field.
The "dump_oops" module parameter and "dump-oops" Device
Tree field are now considered deprecated, but are now automatically
converted to their corresponding max_reason values when present, though
the new max_reason setting has precedence.
For struct ramoops_platform_data, the "dump_oops" member is entirely
replaced by a new "max_reason" member, with the only existing user
updated in place.
Additionally remove the "reason" filter logic from ramoops_pstore_write(),
as that is not specifically needed anymore, though technically
this is a change in behavior for any ramoops users also setting the
printk.always_kmsg_dump boot param, which will cause ramoops to behave as
if max_reason was set to KMSG_DUMP_MAX.
Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new member to struct pstore_info for passing information about
kmesg dump maximum reason. This allows a finer control of what kmesg
dumps are sent to pstore storage backends.
Those backends that do not explicitly set this field (keeping it equal to
0), get the default behavior: store only Oopses and Panics, or everything
if the printk.always_kmsg_dump boot param is set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-5-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This changes the ftrace record merging code to be agnostic of
pstore/ram, as the first step to making it available as a generic
routine for other backends to use, such as pstore/zone.
Link: https://lore.kernel.org/lkml/20200510202436.63222-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to more cleanly pass around backend names, make the "name" member
const. This means the module param needs to be dynamic (technically, it
was before, so this actually cleans up a minor memory leak if a backend
was specified and then gets unloaded.)
Link: https://lore.kernel.org/lkml/20200510202436.63222-3-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The CON_ENABLED flag gets cleared during unregister_console(), so make
sure we already reset the console flags before calling register_console(),
otherwise unloading and reloading a pstore backend will not restart
console logging.
Signed-off-by: Kees Cook <keescook@chromium.org>
If a backend was unloaded without having first removed all its
associated records in pstorefs, subsequent removals would crash while
attempting to call into the now missing backend. Add automatic removal
from the tree in pstore_unregister(), so that no references to the
backend remain.
Reported-by: Luis Henriques <lhenriques@suse.com>
Link: https://lore.kernel.org/lkml/87o8yrmv69.fsf@suse.com
Link: https://lore.kernel.org/lkml/20200506152114.50375-11-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore.update_ms value was being disabled during pstore_unregister(),
which would cause any prior value to go unnoticed on the next
pstore_register(). Instead, just let del_timer() stop the timer, which
was always sufficient. This additionally refactors the timer reset code
and allows the timer to be enabled if the module parameter is changed
away from the default.
Link: https://lore.kernel.org/lkml/20200506152114.50375-10-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Nothing was protecting changes to the pstorefs superblock. Add locking
and refactor away is_pstore_mounted(), instead using a helper to add a
way to safely lock the pstorefs root inode during filesystem changes.
Link: https://lore.kernel.org/lkml/20200506152114.50375-9-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.
Fixes: 1892bf844e ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 19e16d220f ("neigh: support smaller retrans_time settting")
we add more accurate control for ARP and NS. But for ARP I forgot to
update the latest guard in neigh_timer_handler(), then the next
retransmit would be reset to jiffies + HZ/2 if we set the retrans_time
less than 500ms. Fix it by setting the time_before() check to HZ/100.
IPv6 does not have this issue.
Reported-by: Jianwen Ji <jiji@redhat.com>
Fixes: 19e16d220f ("neigh: support smaller retrans_time settting")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl7Ra5oACgkQSD+KveBX
+j6TVQgAr/LLADIfJJxxMWEU9hjEdBx1H0ojxkh/OZRqwkkKsffmeeQm2Ovei1aY
VRhyj6kr2UGYu970dtDzEVTZePdk+Hgapl3v6cIXM4IMPKGsUkYrhcaopyub1vRV
g/3uClIbVmgtxX7NBSJL1e6KGvrGQJ9OFEaNw8gHrN5+ba4qW9PIhMnoybQ0S2r4
eE39I4ZDWU6SAWqbVNTmiwpycPb6mtTRu3zfeX04+4hprQTPpyJ5rKtvKABLVRoY
upkOSPCxUVIzspci/FlfXNzXb08MelVl2o7LUzklQVIiQpnsnY+hBg+y8qTMQ4TA
ErFI/P2vl+UwOwqKV7RwB78q3l9A4w==
=hk6W
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-05-28
This series introduces some fixes to mlx5 driver.
v1->v2:
- Fix bad sha1, Jakub.
- Added one more patch by Pablo.
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
Nothing major, the only patch worth mentioning is the suspend/resume crash
fix by adding the missing pci device handlers, the fix is very straight
forward and as Dexuan already expressed, the patch is important for Azure
users to avoid crash on VM hibernation, patch is marked for -stable v4.6
below.
Conflict note:
('net/mlx5e: Fix MLX5_TC_CT dependencies') has a trivial one line conflict
with current net-next, which can be resolved by simply using the line from
net-next.
Please pull and let me know if there is any problem.
For -stable v4.6
('net/mlx5: Fix crash upon suspend/resume')
For -stable v5.6
('net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This time there is one fix for the error path in the mediatek cmdq driver
(used by their video driver) and a couple of devicetree fixes, mostly
for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers,
one of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for
v5.8 with a cc:stable tag, so I ended up picking them up
here as well
- The Mediatek Video Codec needs to run at a higher frequency
than configured originally
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=E8Pg
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-29
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).
The main changes are:
1) minor verifier fix for fmod_ret progs, from Alexei.
2) af_xdp overflow check, from Bjorn.
3) minor verifier fix for 32bit assignment, from John.
4) powerpc has non-overlapping addr space, from Petr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ColdFire is a big-endian cpu with a big-endian dspi hw module,
so, it uses native access, but memcpy breaks the endianness.
So, if i understand properly, by native copy we would mean
be(cpu)->be(dspi) or le(cpu)->le(dspi) accesses, so my fix
shouldn't break anything, but i couldn't test it on LS family,
so every test is really appreciated.
Fixes: 53fadb4d90 ("spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics")
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200529195756.184677-1-angelo.dureghello@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl7RKm4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6BJB/4pz7N1K3sqs3OXHsHHnMnpTmxV5lU3
4pXDivwESypxJKBDZ96qgSNMGgL9XpxChfA/LCYVy92LvIbjr9vrUh9386Q2arqw
nRe4kTiN7Y8HkLb47GmqzCQdxgGVC35OZJZQzdM5y9rVEH9nbEUHWhsvCHYUR8Cb
Ndm7hT6QzLRTQzlUhu0lPfLc84R0Hl5aFJNkA7enbXL7s9yfTYRf9+zcl+8VOI09
X01OOxsOVNoQUzhTn2Y+SDFLr5N7CNtW7UN17S6sCiiA0XgodxeWmnxl2aaVMG+z
VbsXQPr9ma4gYaD7BjzqaPEQqpgoTrmNqPkrzSzZbFHRc+GC3S5PiLwU
=TOVq
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Cache tiering and cap handling fixups, both marked for stable"
* tag 'ceph-for-5.7-rc8' of git://github.com/ceph/ceph-client:
ceph: flush release queue when handling caps for unknown inode
libceph: ignore pool overlay and cache logic on redirects
waiting for completion on cpu_running.
-----BEGIN PGP SIGNATURE-----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=468t
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Ensure __cpu_up() returns an error if cpu_online() is false after
waiting for completion on cpu_running"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/kernel: Fix return value when cpu_online() fails in __cpu_up()
Pull parisc fix from Helge Deller:
"Fix a kernel panic at boot time for some HP-PARISC machines"
* 'parisc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix kernel panic in mem_init()
