Remove the last usage of pagevecs. There is a slight change here; we now
free the folio_batch as soon as it fills up instead of freeing the
folio_batch when we try to add a page to a full batch. This should have
no effect in practice.
Link: https://lkml.kernel.org/r/20230621164557.3510324-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Within each nfs_server sysfs tree, add an entry named "shutdown". Writing
1 to this file will set the cl_shutdown bit on the rpc_clnt structs
associated with that mount. If cl_shutdown is set, the task scheduler
immediately returns -EIO for new tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For the general and state management nfs_client under each mount, create
symlinks to their respective rpc_client sysfs entries.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use the new TLS handshake API to enable the SunRPC client code
to request a TLS handshake. This implements support for RFC 9289,
only on TCP sockets.
Upper layers such as NFS use RPC-with-TLS to protect in-transit
traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
kTLS sockets use CMSG to report decryption errors and the need
for session re-keying.
For RPC-with-TLS, an "application data" message contains a ULP
payload, and that is passed along to the RPC client. An "alert"
message triggers connection reset. Everything else is discarded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The RPC header parser doesn't recognize TLS handshake traffic, so it
will close the connection prematurely with an error. To avoid that,
shunt the transport's data_ready callback when there is a TLS
handshake in progress.
The XPRT_SOCK_IGNORE_RECV flag will be toggled by code added in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The new authentication flavor is used only to discover peer support
for RPC-over-TLS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pass the upper layer's rpc_create_args to the rpc_clnt_new()
tracepoint so additional parts of the upper layer's request can be
recorded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add an initial set of policies along with fields for upper layers to
pass the requested policy down to the transport layer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
NFS is primarily name-spaced using network namespaces. However it
contacts rpcbind (and gss_proxy) using AF_UNIX sockets which are
name-spaced using the mount namespaces. This requires a container using
NFSv3 (the form that requires rpcbind) to manage both network and mount
namespaces, which can seem an unnecessary burden.
As NFS is primarily a network service it makes sense to use network
namespaces as much as possible, and to prefer to communicate with an
rpcbind running in the same network namespace. This can be done, while
preserving the benefits of AF_UNIX sockets, by using an abstract socket
address.
An abstract address has a nul at the start of sun_path, and a length
that is exactly the complete size of the sockaddr_un up to the end of
the name, NOT including any trailing nul (which is not part of the
address).
Abstract addresses are local to a network namespace - regular AF_UNIX
path names a resolved in the mount namespace ignoring the network
namespace.
This patch causes rpcb to first try an abstract address before
continuing with regular AF_UNIX and then IP addresses. This ensures
backwards compatibility.
Choosing the name needs some care as the same address will be configured
for rpcbind, and needs to be built in to libtirpc for this enhancement
to be fully successful. There is no formal standard for choosing
abstract addresses. The defacto standard appears to be to use a path
name similar to what would be used for a filesystem AF_UNIX address -
but with a leading nul.
In that case
"\0/var/run/rpcbind.sock"
seems like the best choice. However at this time /var/run is deprecated
in favour of /run, so
"\0/run/rpcbind.sock"
might be better.
Though as we are deliberately moving away from using the filesystem it
might seem more sensible to explicitly break the connection and just
have
"\0rpcbind.socket"
using the same name as the systemd unit file..
This patch chooses the second option, which seems least likely to raise
objections.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
An "abtract" address for an AF_UNIX socket start with a nul and can
contain any bytes for the given length, but traditionally doesn't
contain other nuls. When reported, the leading nul is replaced by '@'.
sunrpc currently rejects connections to these addresses and reports them
as an empty string. To provide support for future use of these
addresses, allow them for outgoing connections and report them more
usefully.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit 7d81ee8722 ("svcrdma: Single-stage RDMA Read") changed the
behavior of svc_rdma_recvfrom() but neglected to update the
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Remove a couple of dprintk call sites that are of little value.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The preceding block comment before svc_register_xprt_class() is
not related to that function.
While we're here, add proper documenting comments for these two
publicly-visible functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This event brackets the svcrdma_post_* trace points. If this trace
event is enabled but does not appear as expected, that indicates a
chunk_ctxt leak.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Try to catch incorrect calling contexts mechanically rather than by
code review.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Micro-optimization: Call ktime_get() only when ->xpo_recvfrom() has
given us a full RPC message to process. rq_stime isn't used
otherwise, so this avoids pointless work.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that we have bulk page allocation and release APIs, it's more
efficient to use those than it is for nfsd threads to wait for send
completions. Previous patches have eliminated the calls to
wait_for_completion() and complete(), in order to avoid scheduler
overhead.
Now release pages-under-I/O in the send completion handler using
the efficient bulk release API.
I've measured a 7% reduction in cumulative CPU utilization in
svc_rdma_sendto(), svc_rdma_wc_send(), and svc_xprt_release(). In
particular, using release_pages() instead of complete() cuts the
time per svc_rdma_wc_send() call by two-thirds. This helps improve
scalability because svc_rdma_wc_send() is single-threaded per
connection.
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I noticed that svc_rqst_release_pages() was still unnecessarily
releasing a page when svc_rdma_recvfrom() returns zero.
Fixes: a53d5cb064 ("svcrdma: Avoid releasing a page in svc_xprt_release()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When transmitting data, call down into TCP using sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather than
performing sendpage calls to transmit header, data pages and trailer.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of the completion wait in svc_rdma_sendto(), and release
pages in the send completion handler again. A subsequent patch will
handle releasing those pages more efficiently.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a rw_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a send_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's favored NUMA node ID is available when
allocating a recv_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
This clean up eliminates the hack of destroying recv_ctxts that
were not created by the receive CQ thread -- recv_ctxts are now
always allocated on a "good" node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The physical device's NUMA node ID is available when allocating an
svc_xprt for an incoming connection. Use that value to ensure the
svc_xprt structure is allocated on the NUMA node closest to the
device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.
nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.
Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_init_buffer() is careful to allocate the initial set of server
thread buffer pages from memory on the local NUMA node.
svc_alloc_arg() should also be that careful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Capture a timestamp and pointer address during the creation and
destruction of struct svc_sock to record its lifetime. This helps
to diagnose transport reference counting issues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The -ENOMEM arm could fire repeatedly if the system runs low on
memory, so remove it.
Don't bother to trace -EAGAIN error events, since those fire after
a listener is created (with no work done) and once again after an
accept has been handled successfully (again, with no work done).
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When enabled, this dprintk() fires for every incoming RPC, which is
an enormous amount of log traffic. These days, after the first few
hundred log messages, the system journald is just going to mute it,
along with all other NFSD debug output.
Let's rely on trace points for this high-traffic information
instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The correct function name is svc_tcp_listen_data_ready().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().
Reproduce by two tasks:
1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
Read of size 8 at addr ffff888139d96228 by task nc/102553
CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
print_address_description.constprop.0+0x27/0x310
print_report+0x3e/0x70
kasan_report+0xae/0xe0
svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
tcp_data_queue+0x9f4/0x20e0
tcp_rcv_established+0x666/0x1f60
tcp_v4_do_rcv+0x51c/0x850
tcp_v4_rcv+0x23fc/0x2e80
ip_protocol_deliver_rcu+0x62/0x300
ip_local_deliver_finish+0x267/0x350
ip_local_deliver+0x18b/0x2d0
ip_rcv+0x2fb/0x370
__netif_receive_skb_one_core+0x166/0x1b0
process_backlog+0x24c/0x5e0
__napi_poll+0xa2/0x500
net_rx_action+0x854/0xc90
__do_softirq+0x1bb/0x5de
do_softirq+0xcb/0x100
</IRQ>
<TASK>
...
</TASK>
Allocated by task 102371:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7b/0x90
svc_setup_socket+0x52/0x4f0 [sunrpc]
svc_addsock+0x20d/0x400 [sunrpc]
__write_ports_addfd+0x209/0x390 [nfsd]
write_ports+0x239/0x2c0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 102551:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x190
__kmem_cache_free+0x133/0x270
svc_xprt_free+0x1e2/0x350 [sunrpc]
svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
nfsd_put+0x125/0x240 [nfsd]
nfsd_svc+0x2cb/0x3c0 [nfsd]
write_threads+0x1ac/0x2a0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.
Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc3 ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Two minor bug fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmR3f/AACgkQM2qzM29m
f5dgCQ/+KiS7B1u8O8VrsAy3D2G309UZUf2QMr982pDimaXBR65ggKI5GWTjjwrW
ob0P18prMetT6SGUAIJ3nlEsjDfs+CgKPq/zE2uqB0Sgv4ROmWoboygVsCk+JiTp
xlystF9XBMSjqu23LazFE6+yTAMWcX7ddB5NrJCZr+yMffVZhN6onM38YtQNKh1F
fdY+tY7NgEu24+60Heb8ZAmo2+mX8fSe+lVXuwV3h1HRKand1463NNSMGH0t805P
nBdytIBuwWbOHv8mgL3FB042PSGiHsaL5Yevq42Je+7nN92olHS0ML2IBgcwzHsw
Duc8E8MvElUIADXIfOg5SODjUJ8C5Avclyj7tbcnc9H5jdvolWshbJa8CkhTkvC2
mdVTxDlOpWlBK4fLEtEJQzHldppGZqmnS85ppl4Ipjdu6s6WGyFs6kKXAyKGnsvc
ydNFyhqv88BY6H3S681nLdTdwMFpxa8RAyJqXkcOBmbJd/8naDpDq7bi6GxNUvWs
36ymLklJzWxKP/B0tayvqA+dTiKbs/480Xz37vXrcJigBeWpwyNQG2NUeGeqP2kd
xvEiCZHYq0gmTjGKnxeyvzAeKAlzRKSo4BiI5tUYBOBhV0OHIozz7TMa+Br91sEl
fNrjnr/d8XAxAVmJcWuSlqfggOVFS1D8FxYIhcbY1NV6zPWogu0=
=2AMA
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable Fix:
* Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
* Convert kmap_atomic() to kmap_local_folio()
* Fix a potential double free with READ_PLUS
-----BEGIN PGP SIGNATURE-----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=6xFZ
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
- Convert kmap_atomic() to kmap_local_folio()
- Fix a potential double free with READ_PLUS"
* tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Fix a potential double free with READ_PLUS
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
NFS: Convert kmap_atomic() to kmap_local_folio()
Some calls to rpc_exit_task() may deliberately change the value of
task->tk_status, for instance because it gets checked by the RPC call's
rpc_release() callback. That makes it wrong to reset the value to
task->tk_rpc_status.
In particular this causes a bug where the rpc_call_done() callback tries
to fail over a set of pNFS/flexfiles writes to a different IP address,
but the reset of task->tk_status causes nfs_commit_release_pages() to
immediately mark the file as having a fatal error.
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- A collection of minor bug fixes
-----BEGIN PGP SIGNATURE-----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=PiNG
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
The trace event recorded incorrect values for the registered family,
protocol, and port because the arguments are in the wrong order.
Fixes: b4af59328c ("SUNRPC: Trace server-side rpcbind registration events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request. We may need
to free the ctxt as well.
As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq. The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.
We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request. This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced. The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.
Fixes: 773f91b2cf ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out
of the svc_rqst into the svc_deferred_req.
When the deferred request is revisited, the pointer is copied into
the new svc_rqst - and also remains in the svc_deferred_req.
In the (rare?) case that the request is deferred a second time, the old
svc_deferred_req is reused - it still has all the correct content.
However in that case the rq_xprt_ctxt pointer is NOT cleared so that
when xpo_release_xprt is called, the ctxt is freed (UDP) or possible
added to a free list (RDMA).
When the deferred request is revisited for a second time, it will
reference this ctxt which may be invalid, and the free the object a
second time which is likely to oops.
So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that
the value is now stored in the svc_deferred_req.
Fixes: 773f91b2cf ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Dan points out that sock_alloc_file() releases @sock on error, but
so do all of svc_setup_socket's callers, resulting in a double-
release if sock_alloc_file() returns an error.
Rather than allocating a struct file for all new sockets, allocate
one only for sockets created during a TCP accept. For the moment,
those are the only ones that will ever be used with RPC-with-TLS.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: ae0d77708a ("SUNRPC: Ensure server-side sockets have a sock->file")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Scott reports SUNRPC self-test failures regarding the output IV on arm64
when using the SIMD accelerated implementation of AES in CBC mode with
ciphertext stealing ("cts(cbc(aes))" in crypto API speak).
These failures are the result of the fact that, while RFC 3962 does
specify what the output IV should be and includes test vectors for it,
the general concept of an output IV is poorly defined, and generally,
not specified by the various algorithms implemented by the crypto API.
Only algorithms that support transparent chaining (e.g., CBC mode on a
block boundary) have requirements on the output IV, but ciphertext
stealing (CTS) is fundamentally about how to encapsulate CBC in a way
where the length of the entire message may not be an integral multiple
of the cipher block size, and the concept of an output IV does not exist
here because it has no defined purpose past the end of the message.
The generic CTS template takes advantage of this chaining capability of
the CBC implementations, and as a result, happens to return an output
IV, simply because it passes its IV buffer directly to the encapsulated
CBC implementation, which operates on full blocks only, and always
returns an IV. This output IV happens to match how RFC 3962 defines it,
even though the CTS template itself does not contain any output IV logic
whatsoever, and, for this reason, lacks any test vectors that exercise
this accidental output IV generation.
The arm64 SIMD implementation of cts(cbc(aes)) does not use the generic
CTS template at all, but instead, implements the CBC mode and ciphertext
stealing directly, and therefore does not encapsule a CBC implementation
that returns an output IV in the same way. The arm64 SIMD implementation
complies with the specification and passes all internal tests, but when
invoked by the SUNRPC code, fails to produce the expected output IV and
causes its selftests to fail.
Given that the output IV is defined as the penultimate block (where the
final block may smaller than the block size), we can quite easily derive
it in the caller by copying the appropriate slice of ciphertext after
encryption.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The big ticket item for this release is support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server. The goal is to
provide a simple-to-deploy, low-overhead in-transit confidentiality
and peer authentication mechanism. It can supplement NFS Kerberos
and it can protect the use of legacy non-cryptographic user
authentication flavors such as AUTH_SYS. The TLS Record protocol is
handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Work continues on improving NFSD's open file cache. Among the many
clean-ups in that area is a patch to convert the rhashtable to use
the list-hashing version of that data structure.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmRK/JMACgkQM2qzM29m
f5cF5A/+JZFRSPlfSYt0YHzUQQSDdYn5n/IG9TwJQd62xheu083WuKRaCOYYoOhg
06nZd6p7nuF1E0n2ZWOKSE6YkBSE6z4M6KrQlm6lCe/nmxYCR87IYfJCXuL+Yf0e
/LdL4OTvDHzY5ec1DreERldPIUJ8GFzwChH8/z4XwbNDR7qJkF/gf8YxpFr+8K+j
Cfyl8woZiEze/Nvxy1YtAqa7HMEpitt0aWJN55rHwTh9c3b0nmDzziYFcVqXgybJ
/qUHfHBak66ll8RqhcQ3BMuyfszwASERbPsaZ2a5F/RaxLL5ZWfFyhgQwm+PZWT+
J5DdSBwLEQYtKQGD41A1aorP6v/u2QelfWrl4S7/qjRpREp8Ba2IU4fYLjGb1499
Imk68BA7NwFp87tdMi/7en1VVgina4U/S3X71aUYWe+C0g48BfTrVwq4SVbQSAo4
1638vbZnrJbsJMr9OaaysKWfv4KZB020Ji1KVwuqmgy5F8kdfJCCQ2UR/fHuJ3DY
R0Zrd1Ryjwr83viP+Xj0ERiW405gPdCT0RJqoA7rznRPCqT5M42tf5z65uO7iZeE
C1udgDaoQOtioKlem6FcDXLkryf986slGA7V91lat/Jt8A5jLKQfjVe3Q+kaaqXP
ka1DQnYelzMzILQQs39cqW5pShrH8e3tfRZ7JhdBgrpxVXz9ZZM=
=lA2+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The big ticket item for this release is that support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server.
The goal is to provide a simple-to-deploy, low-overhead in-transit
confidentiality and peer authentication mechanism. It can supplement
NFS Kerberos and it can protect the use of legacy non-cryptographic
user authentication flavors such as AUTH_SYS. The TLS Record protocol
is handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Aside from that, work continues on improving NFSD's open file cache.
Among the many clean-ups in that area is a patch to convert the
rhashtable to use the list-hashing version of that data structure"
* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
NFSD: Handle new xprtsec= export option
SUNRPC: Support TLS handshake in the server-side TCP socket code
NFSD: Clean up xattr memory allocation flags
NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
SUNRPC: Clear rq_xid when receiving a new RPC Call
SUNRPC: Recognize control messages in server-side TCP socket code
SUNRPC: Be even lazier about releasing pages
SUNRPC: Convert svc_xprt_release() to the release_pages() API
SUNRPC: Relocate svc_free_res_pages()
nfsd: simplify the delayed disposal list code
SUNRPC: Ignore return value of ->xpo_sendto
SUNRPC: Ensure server-side sockets have a sock->file
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
SUNRPC: return proper error from get_expiry()
lockd: add some client-side tracepoints
nfs: move nfs_fhandle_hash to common include file
lockd: server should unlock lock if client rejects the grant
lockd: fix races in client GRANTED_MSG wait logic
lockd: move struct nlm_wait to lockd.h
...
New Features:
* Convert the readdir path to use folios
* Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
* Always send a RECLAIM_COMPLETE after establishing a lease
* Simplify sysctl registrations and other cleanups
* Handle out-of-order write replies on NFS v3
* Have sunrpc call_bind_status use standard hard/soft task semantics
* Other minor cleanups
-----BEGIN PGP SIGNATURE-----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=gpBC
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the readdir path to use folios
- Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
- Always send a RECLAIM_COMPLETE after establishing a lease
- Simplify sysctl registrations and other cleanups
- Handle out-of-order write replies on NFS v3
- Have sunrpc call_bind_status use standard hard/soft task semantics
- Other minor cleanups"
* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Rework scratch handling for READ_PLUS
NFS: Cleanup unused rpc_clnt variable
NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
SUNRPC: remove the maximum number of retries in call_bind_status
NFS: Convert readdir page array functions to use a folio
NFS: Convert the readdir array-of-pages into an array-of-folios
NFSv3: handle out-of-order write replies.
NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
NFS: Convert buffered read paths to use netfs when fscache is enabled
NFS: Configure support for netfs when NFS fscache is configured
NFS: Rename readpage_async_filler to nfs_read_add_folio
sunrpc: simplify one-level sysctl registration for debug_table
sunrpc: move sunrpc_table and proc routines above
sunrpc: simplify one-level sysctl registration for xs_tunables_table
sunrpc: simplify one-level sysctl registration for xr_tunables_table
nfs: simplify two-level sysctl registration for nfs_cb_sysctls
nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
lockd: simplify two-level sysctl registration for nlm_sysctls
NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease
This patch adds opportunitistic RPC-with-TLS to the Linux in-kernel
NFS server. If the client requests RPC-with-TLS and the user space
handshake agent is running, the server will set up a TLS session.
There are no policy settings yet. For example, the server cannot
yet require the use of RPC-with-TLS to access its data.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This is an eye-catcher for tracepoints that record the XID: it means
svc_rqst() has not received a full RPC Call with an XID yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
To support kTLS, the server-side TCP socket receive path needs to
watch for CMSGs.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A single RPC transaction that touches only a couple of pages means
rq_pvec will not be even close to full in svc_xpt_release(). This is
a common case.
Instead, just leave the pages in rq_pvec until it is completely
full. This improves the efficiency of the batch release mechanism
on workloads that involve small RPC messages.
The rq_pvec is also fully emptied just before thread exit.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Instead of invoking put_page() one-at-a-time, pass the "response"
portion of rq_pages directly to release_pages() to reduce the number
of times each nfsd thread invokes a page allocator API.
Since svc_xprt_release() is not invoked while a client is waiting
for an RPC Reply, this is not expected to directly impact mean
request latencies on a lightly or moderately loaded server. However
as workload intensity increases, I expect somewhat better
scalability: the same number of server threads should be able to
handle more work.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean-up: There doesn't seem to be a reason why this function is
stuck in a header. One thing it prevents is the convenient addition
of tracing. Moving it to a source file also makes the rq_respages
clean-up logic easier to find.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: All callers of svc_process() ignore its return value, so
svc_process() can safely be converted to return void. Ditto for
svc_send().
The return value of ->xpo_sendto() is now used only as part of a
trace event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The TLS handshake upcall mechanism requires a non-NULL sock->file on
the socket it hands to user space. svc_sock_free() already releases
sock->file properly if one exists.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been several bugs over the years where the NFSD splice
actor has attempted to write outside the rq_pages array.
This is a "should never happen" condition, but if for some reason
the pipe splice actor should attempt to walk past the end of
rq_pages, it needs to terminate the READ operation to prevent
corruption of the pointer addresses in the fields just beyond the
array.
A server crash is thus prevented. Since the code is not behaving,
the READ operation returns -EIO to the client. None of the READ
payload data can be trusted if the splice actor isn't operating as
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The get_expiry() function currently returns a timestamp, and uses the
special return value of 0 to indicate an error.
Unfortunately this causes a problem when 0 is the correct return value.
On a system with no RTC it is possible that the boot time will be seen
to be "3". When exportfs probes to see if a particular filesystem
supports NFS export it tries to cache information with an expiry time of
"3". The intention is for this to be "long in the past". Even with no
RTC it will not be far in the future (at most a second or two) so this
is harmless.
But if the boot time happens to have been calculated to be "3", then
get_expiry will fail incorrectly as it converts the number to "seconds
since bootime" - 0.
To avoid this problem we change get_expiry() to report the error quite
separately from the expiry time. The error is now the return value.
The expiry time is reported through a by-reference parameter.
Reported-by: Jerry Zhang <jerry@skydio.com>
Tested-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.
This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.
Fixes: 0b760113a3 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Address two issues with the new GSS krb5 Kunit tests
-----BEGIN PGP SIGNATURE-----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=a/Wj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address two issues with the new GSS krb5 Kunit tests
* tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix failures of checksum Kunit tests
sunrpc: Fix RFC6803 encryption test
Scott reports that when the new GSS krb5 Kunit tests are built as
a separate module and loaded, the RFC 6803 and RFC 8009 checksum
tests all fail, even though they pass when run under kunit.py.
It appears that passing a buffer backed by static const memory to
gss_krb5_checksum() is a problem. A printk in checksum_case() shows
the correct plaintext, but by the time the buffer has been converted
to a scatterlist and arrives at checksummer(), it contains all
zeroes.
Replacing this buffer with one that is dynamically allocated fixes
the issue.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 02142b2ca8 ("SUNRPC: Add checksum KUnit tests for the RFC 6803 encryption types")
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The usage_data[] array in rfc6803_encrypt_case() is uninitialised, so clear
it as it may cause the tests to fail otherwise.
Fixes: b958cff6b2 ("SUNRPC: Add encryption KUnit tests for the RFC 6803 encryption types")
Link: https://lore.kernel.org/r/380323.1681314997@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need to do a forward declaration for sunrpc_table, just move
the sysctls up as everyone else does it. This will make the next
change easier to read. This change produces no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
-----BEGIN PGP SIGNATURE-----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=bk6S
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
* tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: callback request does not use correct credential for AUTH_SYS
NFS: Remove "select RPCSEC_GSS_KRB5
sunrpc: only free unix grouplist after RCU settles
nfsd: call op_release, even when op_func returns an error
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
While the unix_gid object is rcu-freed, the group_info list that it
contains is not. Ensure that we only put the group list reference once
we are really freeing the unix_gid object.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2183056
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: fd5d2f7826 ("SUNRPC: Make server side AUTH_UNIX use lockless lookups")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Bugfixes:
* Fix shutdown of NFS TCP client sockets
* Fix hangs when recovering open state after a server reboot
-----BEGIN PGP SIGNATURE-----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=S4il
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix shutdown of NFS TCP client sockets
- Fix hangs when recovering open state after a server reboot
* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix shutdown of NFS TCP client socket
NFSv4: Fix hangs when recovering open state after a server reboot
- Fix a crash when using NFS with krb5p
-----BEGIN PGP SIGNATURE-----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=FHAt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
NFS server Duplicate Request Cache (DRC) algorithms rely on NFS clients
reconnecting using the same local TCP port. Unique NFS operations are
identified by the per-TCP connection set of XIDs. This prevents file
corruption when non-idempotent NFS operations are retried.
Currently, NFS client TCP connections are using different local TCP ports
when reconnecting to NFS servers.
After an NFS server initiates shutdown of the TCP connection, the NFS
client's TCP socket is set to NULL after the socket state has reached
TCP_LAST_ACK(9). When reconnecting, the new socket attempts to reuse
the same local port but fails with EADDRNOTAVAIL (99). This forces the
socket to use a different local TCP port to reconnect to the remote NFS
server.
State Transition and Events:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
connect(fail EADDRNOTAVAIL(99))
TCP_CLOSE(7)
bind on new port
connect success
dmesg excerpts showing reconnect switching from TCP local port of 926 to
763 after commit 7c81e6a9d75b:
[13354.947854] NFS call mkdir testW
...
[13405.654781] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654813] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[13405.654826] RPC: xs_data_ready...
[13405.654892] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654895] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654899] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.654900] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.654950] RPC: xs_connect scheduled xprt 00000000037d0f03
[13405.654975] RPC: xs_bind 0.0.0.0:926: ok (0)
[13405.654980] RPC: worker connecting xprt 00000000037d0f03 via tcp
to 10.101.6.228 (port 2049)
[13405.654991] RPC: 00000000037d0f03 connect status 99 connected 0
sock state 7
[13405.655001] RPC: xs_tcp_state_change client 00000000037d0f03...
[13405.655002] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[13405.655024] RPC: xs_connect scheduled xprt 00000000037d0f03
[13405.655038] RPC: xs_bind 0.0.0.0:763: ok (0)
[13405.655041] RPC: worker connecting xprt 00000000037d0f03 via tcp
to 10.101.6.228 (port 2049)
[13405.655065] RPC: 00000000037d0f03 connect status 115 connected 0
sock state 2
State Transition and Events with patch applied:
TCP_CLOSE_WAIT(8)
TCP_LAST_ACK(9)
TCP_CLOSE(7)
connect(reuse of port succeeds)
dmesg excerpts showing reconnect on same TCP local port of 936 with patch
applied:
[ 257.139935] NFS: mkdir(0:59/560857152), testQ
[ 257.139937] NFS call mkdir testQ
...
[ 307.822702] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1
[ 307.822714] RPC: xs_data_ready...
[ 307.822817] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.822821] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.822825] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.822826] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823606] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.823609] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823629] RPC: xs_tcp_state_change client 00000000ce702f14...
[ 307.823632] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 307.823676] RPC: xs_connect scheduled xprt 00000000ce702f14
[ 307.823704] RPC: xs_bind 0.0.0.0:936: ok (0)
[ 307.823709] RPC: worker connecting xprt 00000000ce702f14 via tcp
to 10.101.1.30 (port 2049)
[ 307.823748] RPC: 00000000ce702f14 connect status 115 connected 0
sock state 2
...
[ 314.916193] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3
[ 314.916251] RPC: xs_connect scheduled xprt 00000000ce702f14
[ 314.916282] RPC: xs_bind 0.0.0.0:936: ok (0)
[ 314.916292] RPC: worker connecting xprt 00000000ce702f14 via tcp
to 10.101.1.30 (port 2049)
[ 314.916342] RPC: 00000000ce702f14 connect status 115 connected 0
sock state 2
Fixes: 7c81e6a9d7 ("SUNRPC: Tweak TCP socket shutdown in the RPC client")
Signed-off-by: Siddharth Rajendra Kawar <sikawar@microsoft.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Anna says:
> KASAN reports [...] a slab-out-of-bounds in gss_krb5_checksum(),
> and it can cause my client to panic when running cthon basic
> tests with krb5p.
> Running faddr2line gives me:
>
> gss_krb5_checksum+0x4b6/0x630:
> ahash_request_free at
> /home/anna/Programs/linux-nfs.git/./include/crypto/hash.h:619
> (inlined by) gss_krb5_checksum at
> /home/anna/Programs/linux-nfs.git/net/sunrpc/auth_gss/gss_krb5_crypto.c:358
My diagnosis is that the memcpy() at the end of gss_krb5_checksum()
reads past the end of the buffer containing the checksum data
because the callers have ignored gss_krb5_checksum()'s API contract:
* Caller provides the truncation length of the output token (h) in
* cksumout.len.
Instead they provide the fixed length of the hmac buffer. This
length happens to be larger than the value returned by
crypto_ahash_digestsize().
Change these errant callers to work like krb5_etm_{en,de}crypt().
As a defensive measure, bound the length of the byte copy at the
end of gss_krb5_checksum().
Kunit sez:
Testing complete. Ran 68 tests: passed: 68
Elapsed time: 81.680s total, 5.875s configuring, 75.610s building, 0.103s running
Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Fixes: 8270dbfceb ("SUNRPC: Obscure Kerberos integrity keys")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
-----BEGIN PGP SIGNATURE-----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=z6NN
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Fix a race where kthread_stop() may prevent the threadfn from ever getting
called. If that happens the svc_rqst will not be cleaned up.
Fixes: ed6473ddc7 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Make new GSS Kerberos Kunit tests work on non-x86 platforms
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmP/oFgACgkQM2qzM29m
f5dljg//VzhpMgU/2HTzWyWfEm30zXZq4CHm+XJQ7/6psKfIzTzu6D0IjiZUgqho
GlPSWitS0GQFZ8ciOJpaq0Ux7X397jast6H3Z40L8aS3J9dgOQ8ERify8BRc2HY5
llrqN+j4VgwBB3/ny5jxbajzcQdNnsxX+cUvvyKEkqnTpFgkePR2ozjo6IDAuPgQ
8tSmL28xLGc8gbUU/QL8xa5cBiqAzg/H3jyW7/vB6740mbkGQyYz3KqD8Z3jQjja
qymsdc0XvRn5ZpYfBbHms4U5wKudt+/lMsZpmUjSlW28oG2EnSL+o3McAvfobNzC
Xd2zmxZltrtujmGaaM0jNT7Z0+guvns9+gv7nm/nsKJgBdCrZBlwkV1ab8B3TSyz
Etk9psL7fUJxzlmf48iuHQAevjCYJxaEafGRapPxVrsN9Qu3lv0xq3X05w838rgI
A0BKAM/0zU5msTefG4lyv2SJxIpBD6jv8+YRGzXKrcX7nNgdUEGLWtn8btIqgpHp
ZzZtdAtDH4cWIB8cGaZhMMR2fef1ptVWCukbS+o+0YHv0piBHcZ2c1XaXgVh4mn0
0fT+Si2NtISy187/Gdr2hcGheqgmUM5cyU0jduDlqW+OMz3ji5r5SHd8mj8KV426
bAP/G1VtCcCCBPbwK+pyX/XS0/btQLdscSHNANroSBti5HytL7g=
=SoeB
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Make new GSS Kerberos Kunit tests work on non-x86 platforms
* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Properly terminate test case arrays
SUNRPC: Let Kunit tests run with some enctypes compiled out
Unable to handle kernel paging request at virtual address 73657420 when execute
[73657420] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
CPU: 0 PID: 1 Comm: swapper Tainted: G N 6.2.0-rc7-00133-g373f26a81164-dirty #9
Hardware name: Generic DT based system
PC is at 0x73657420
LR is at kunit_run_tests+0x3e0/0x5f4
On x86 with GCC 12, the missing array terminators did not seem to
matter. Other platforms appear to be more picky.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow the new GSS Kerberos encryption type test suites to run
outside of the kunit infrastructure. Replace the assertion that
fires when lookup_enctype() so that the case is skipped instead of
failing outright.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
New Features:
* Convert the read and write paths to use folios
Bugfixes and Cleanups:
* Fix tracepoint state manager flag printing
* Fix disabling swap files
* Fix NFSv4 client identifier sysfs path in the documentation
* Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED
* Treat GETDEVICEINFO errors as a layout failure
* Replace kmap_atomic() calls with kmap_local_page()
* Constify sunrpc sysfs kobj_type structures
-----BEGIN PGP SIGNATURE-----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=39ue
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the read and write paths to use folios
Bugfixes and Cleanups:
- Fix tracepoint state manager flag printing
- Fix disabling swap files
- Fix NFSv4 client identifier sysfs path in the documentation
- Don't clear NFS_CAP_COPY if server returns NFS4ERR_OFFLOAD_DENIED
- Treat GETDEVICEINFO errors as a layout failure
- Replace kmap_atomic() calls with kmap_local_page()
- Constify sunrpc sysfs kobj_type structures"
* tag 'nfs-for-6.3-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (25 commits)
fs/nfs: Replace kmap_atomic() with kmap_local_page() in dir.c
pNFS/filelayout: treat GETDEVICEINFO errors as layout failure
Documentation: Fix sysfs path for the NFSv4 client identifier
nfs42: do not fail with EIO if ssc returns NFS4ERR_OFFLOAD_DENIED
NFS: fix disabling of swap
SUNRPC: make kobj_type structures constant
nfs4trace: fix state manager flag printing
NFS: Remove unnecessary check in nfs_read_folio()
NFS: Improve tracing of nfs_wb_folio()
NFS: Enable tracing of nfs_invalidate_folio() and nfs_launder_folio()
NFS: fix up nfs_release_folio() to try to release the page
NFS: Clean up O_DIRECT request allocation
NFS: Fix up nfs_vm_page_mkwrite() for folios
NFS: Convert nfs_write_begin/end to use folios
NFS: Remove unused function nfs_wb_page()
NFS: Convert buffered writes to use folios
NFS: Convert the function nfs_wb_page() to use folios
NFS: Convert buffered reads to use folios
NFS: Add a helper nfs_wb_folio()
NFS: Convert the remaining pagelist helper functions to support folios
...
Two significant security enhancements are part of this release:
* NFSD's RPC header encoding and decoding, including RPCSEC GSS
and gssproxy header parsing, has been overhauled to make it
more memory-safe.
* Support for Kerberos AES-SHA2-based encryption types has been
added for both the NFS client and server. This provides a clean
path for deprecating and removing insecure encryption types
based on DES and SHA-1. AES-SHA2 is also FIPS-140 compliant, so
that NFS with Kerberos may now be used on systems with fips
enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of
fixes have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic,
and significantly reduces noise when KCSAN is enabled.
-----BEGIN PGP SIGNATURE-----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=ZG/7
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Two significant security enhancements are part of this release:
- NFSD's RPC header encoding and decoding, including RPCSEC GSS and
gssproxy header parsing, has been overhauled to make it more
memory-safe.
- Support for Kerberos AES-SHA2-based encryption types has been added
for both the NFS client and server. This provides a clean path for
deprecating and removing insecure encryption types based on DES and
SHA-1. AES-SHA2 is also FIPS-140 compliant, so that NFS with
Kerberos may now be used on systems with fips enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of fixes
have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic, and
significantly reduces noise when KCSAN is enabled"
* tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (121 commits)
NFSD: Clean up nfsd_symlink()
NFSD: copy the whole verifier in nfsd_copy_write_verifier
nfsd: don't fsync nfsd_files on last close
SUNRPC: Fix occasional warning when destroying gss_krb5_enctypes
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix race to check ls_layouts
nfsd: don't hand out delegation on setuid files being opened for write
SUNRPC: Remove ->xpo_secure_port()
SUNRPC: Clean up the svc_xprt_flags() macro
nfsd: remove fs/nfsd/fault_inject.c
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
nfsd: zero out pointers after putting nfsd_files on COPY setup error
SUNRPC: Fix whitespace damage in svcauth_unix.c
nfsd: eliminate __nfs4_get_fd
nfsd: add some kerneldoc comments for stateid preprocessing functions
nfsd: eliminate find_deleg_file_locked
nfsd: don't take nfsd4_copy ref for OP_OFFLOAD_STATUS
SUNRPC: Add encryption self-tests
...
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
I'm guessing that the warning fired because there's some code path
that is called on module unload where the gss_krb5_enctypes file
was never set up.
name 'gss_krb5_enctypes'
WARNING: CPU: 0 PID: 6187 at fs/proc/generic.c:712 remove_proc_entry+0x38d/0x460 fs/proc/generic.c:712
destroy_krb5_enctypes_proc_entry net/sunrpc/auth_gss/svcauth_gss.c:1543 [inline]
gss_svc_shutdown_net+0x7d/0x2b0 net/sunrpc/auth_gss/svcauth_gss.c:2120
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
setup_net+0x9bd/0xe60 net/core/net_namespace.c:356
copy_net_ns+0x320/0x6b0 net/core/net_namespace.c:483
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x410/0x500 kernel/nsproxy.c:179
copy_process+0x311d/0x76b0 kernel/fork.c:2272
kernel_clone+0xeb/0x9a0 kernel/fork.c:2684
__do_sys_clone+0xba/0x100 kernel/fork.c:2825
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: syzbot+04a8437497bcfb4afa95@syzkaller.appspotmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no need for the cost of this extra virtual function call
during every RPC transaction: the RQ_SECURE bit can be set properly
in ->xpo_recvfrom() instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the KUnit infrastructure recently added, we are free to define
other unit tests particular to our implementation. As an example,
I've added a self-test that encrypts then decrypts a string, and
checks the result.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample encryption results. Add KUnit tests to
ensure our implementation derives the expected results for the
provided sample input.
I hate how large this test is, but using non-standard key usage
values means rfc8009_encrypt_case() can't simply reuse ->import_ctx
to allocate and key its ciphers; and the test provides its own
confounders, which means krb5_etm_encrypt() can't be used directly.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample checksum results. Add KUnit tests to ensure
our implementation derives the expected results for the provided
sample input.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 provides sample key derivation results, so Kunit tests are
added to ensure our implementation derives the expected keys for the
provided sample input.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Camellia enctypes use a new KDF, so add some tests to ensure it
is working properly.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add Kunit tests for ENCTYPE_AES128_CTS_HMAC_SHA1_96. The test
vectors come from RFC 3962 Appendix B.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 3961 Appendix A provides tests for the KDF specified in that
document as well as other parts of Kerberos. The other three usage
scenarios in Section 10 are not implemented by the Linux kernel's
RPCSEC GSS Kerberos 5 mechanism, so tests are not added for those.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I plan to add KUnit tests that will need enctype profile
information. Export the enctype profile lookup function.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Kerberos RFCs provide test vectors to verify the operation of
an implementation. Introduce a KUnit test framework to exercise the
Linux kernel's implementation of Kerberos.
Start with test cases for the RFC 3961-defined n-fold function. The
sample vectors for that are found in RFC 3961 Section 10.
Run the GSS Kerberos 5 mechanism's unit tests with this command:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./net/sunrpc/.kunitconfig
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The goal is to leave only protocol-defined items in gss_krb5.h so
that it can be easily replaced by a generic header. Implementation
specific items are moved to the new internal header.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add the RFC 6803 encryption types to the string of integers that is
reported to gssd during upcalls. This enables gssd to utilize keys
with these encryption types when support for them is built into the
kernel.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Camellia enctypes use the KDF_FEEDBACK_CMAC Key Derivation
Function defined in RFC 6803 Section 3.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 6803 defines two encryption types that use Camellia ciphers (RFC
3713) and CMAC digests. Implement support for those in SunRPC's GSS
Kerberos 5 mechanism.
There has not been an explicit request to support these enctypes.
However, this new set of enctypes provides a good alternative to the
AES-SHA1 enctypes that are to be deprecated at some point.
As this implementation is still a "beta", the default is to not
build it automatically.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add the RFC 8009 encryption types to the string of integers that is
reported to gssd during upcalls. This enables gssd to utilize keys
with these encryption types when support for them is built into the
kernel.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=400
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8009 enctypes use different crypt formulae than previous
Kerberos 5 encryption types. Section 1 of RFC 8009 explains the
reason for this change:
> The new types conform to the framework specified in [RFC3961],
> but do not use the simplified profile, as the simplified profile
> is not compliant with modern cryptographic best practices such as
> calculating Message Authentication Codes (MACs) over ciphertext
> rather than plaintext.
Add new .encrypt and .decrypt functions to handle this variation.
The new approach described above is referred to as Encrypt-then-MAC
(or EtM). Hence the names of the new functions added here are
prefixed with "krb5_etm_".
A critical second difference with previous crypt formulae is that
the cipher state is included in the computed HMAC. Note however that
for RPCSEC, the initial cipher state is easy to compute on both
initiator and acceptor because it is always all zeroes.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The RFC 8009 encryption types use a different key derivation
function than the RFC 3962 encryption types. The new key derivation
function is defined in Section 3 of RFC 8009.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fill in entries in the supported_gss_krb5_enctypes array for the
encryption types defined in RFC 8009. These new enctypes use the
SHA-256 and SHA-384 message digest algorithms (as defined in
FIPS-180) instead of the deprecated SHA-1 algorithm, and are thus
more secure.
Note that NIST has scheduled SHA-1 for deprecation:
https://www.nist.gov/news-events/news/2022/12/nist-retires-sha-1-cryptographic-algorithm
Thus these new encryption types are placed under a separate CONFIG
option to enable distributors to separately introduce support for
the AES-SHA2 enctypes and deprecate support for the current set of
AES-SHA1 encryption types as their user space allows.
As this implementation is still a "beta", the default is to not
build it automatically.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cryptosystem profile enctypes all use cipher block chaining
with ciphertext steal (CBC-with-CTS). However enctypes that are
currently supported in the Linux kernel SunRPC implementation
use only the encrypt-&-MAC approach. The RFC 8009 enctypes use
encrypt-then-MAC, which performs encryption and checksumming in
a different order.
Refactor to make it possible to share the CBC with CTS encryption
and decryption mechanisms between e&M and etM enctypes.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The aes256-cts-hmac-sha384-192 enctype specifies the length of its
checksum and integrity subkeys as 192 bits, but the length of its
encryption subkey (Ke) as 256 bits. Add new fields to struct
gss_krb5_enctype that specify the key lengths individually, and
where needed, use the correct new field instead of ->keylength.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Although the Kerberos specs have always listed separate subkey
lengths, the Linux kernel's SunRPC GSS Kerberos enctype profiles
assume the base key and the derived keys have identical lengths.
The aes256-cts-hmac-sha384-192 enctype specifies the length of its
checksum and integrity subkeys as 192 bits, but the length of its
encryption subkey (Ke) as 256 bits.
To support that enctype, parametrize context_v2_alloc_cipher() so
that each of its call sites can pass in its desired key length. For
now it will be the same length as before (gk5e->keylength), but a
subsequent patch will change this.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
De-duplicate some common code.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Each Kerberos enctype can have a different KDF. Refactor the key
derivation path to support different KDFs for the enctypes
introduced in subsequent patches.
In particular, expose the key derivation function in struct
gss_krb5_enctype instead of the enctype's preferred random-to-key
function. The latter is usually the identity function and is only
ever called during key derivation, so have each KDF call it
directly.
A couple of extra clean-ups:
- Deduplicate the set_cdata() helper
- Have ->derive_key return negative errnos, in accordance with usual
kernel coding conventions
This patch is a little bigger than I'd like, but these are all
mechanical changes and they are all to the same areas of code. No
behavior change is intended.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: there is now only one encrypt and only one decrypt method,
thus there is no longer a need for the v2-suffixed method names.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: ->encrypt is set to only one value. Replace the two
remaining call sites with direct calls to krb5_encrypt().
There have never been any call sites for the ->decrypt() method.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Because the DES block cipher has been deprecated by Internet
standard, highly secure configurations might require that DES
support be blacklisted or not installed. NFS Kerberos should still
be able to work correctly with only the AES-based enctypes in that
situation.
Also note that MIT Kerberos has begun a deprecation process for DES
encryption types. Their README for 1.19.3 states:
> Beginning with the krb5-1.19 release, a warning will be issued
> if initial credentials are acquired using the des3-cbc-sha1
> encryption type. In future releases, this encryption type will
> be disabled by default and eventually removed.
>
> Beginning with the krb5-1.18 release, single-DES encryption
> types have been removed.
Aside from the CONFIG option name change, there are two important
policy changes:
1. The 'insecure enctype' group is now disabled by default.
Distributors have to take action to enable support for deprecated
enctypes. Implementation of these enctypes will be removed in a
future kernel release.
2. des3-cbc-sha1 is now considered part of the 'insecure enctype'
group, having been deprecated by RFC 8429, and is thus disabled
by default
After this patch is applied, SunRPC support can be built with
Kerberos 5 support but without CRYPTO_DES enabled in the kernel.
And, when these enctypes are disabled, the Linux kernel's SunRPC
RPCSEC GSS implementation fully complies with BCP 179 / RFC 6649
and BCP 218 / RFC 8429.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all consumers of the KRB5_SUPPORTED_ENCTYPES macro are
within the SunRPC layer, the macro can be replaced with something
private and more flexible.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I would like to replace the KRB5_SUPPORTED_ENCTYPES macro so that
there is finer granularity about what enctype support is built in
to the kernel and then advertised by it.
The /proc/fs/nfsd/supported_krb5_enctypes file is a legacy API
that advertises supported enctypes to rpc.svcgssd (I think?). It
simply prints the value of the KRB5_SUPPORTED_ENCTYPES macro, so it
will need to be replaced with something that can instead display
exactly which enctypes are configured and built into the SunRPC
layer.
Completely decommissioning such APIs is hard. Instead, add a file
that is managed by SunRPC's GSS Kerberos mechanism, which is
authoritative about enctype support status. A subsequent patch will
replace /proc/fs/nfsd/supported_krb5_enctypes with a symlink to this
new file.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace another switch on encryption type so that it does not have
to be modified when adding or removing support for an enctype.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace a number of switches on encryption type so that all of them don't
have to be modified when adding or removing support for an enctype.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no need to keep the integrity keys around if we instead
allocate and key a pair of ahashes and keep those. This not only
enables the subkeys to be destroyed immediately after deriving
them, but it makes the Kerberos integrity code path more efficient.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no need to keep the signing keys around if we instead allocate
and key an ahash and keep that. This not only enables the subkeys to
be destroyed immediately after deriving them, but it makes the
Kerberos signing code path more efficient.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The encryption subkeys are not used after the cipher transforms have
been allocated and keyed. There is no need to retain them in struct
krb5_ctx.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Hoist the name of the aux_cipher into struct gss_krb5_enctype to
prepare for obscuring the encryption keys just after they are
derived.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
ctx->Ksess is never used after import has completed. Obscure it
immediately so it cannot be re-used or copied.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Other common Kerberos implementations use a fully random confounder
for encryption. The reason for this is explained in the new comment
added by this patch. The current get_random_bytes() implementation
does not exhaust system entropy.
Since confounder generation is part of Kerberos itself rather than
the GSS-API Kerberos mechanism, the function is renamed and moved.
Note that light top-down analysis shows that the SHA-1 transform
is by far the most CPU-intensive part of encryption. Thus we do not
expect this change to result in a significant performance impact.
However, eventually it might be necessary to generate an independent
stream of confounders for each Kerberos context to help improve I/O
parallelism.
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that arcfour-hmac is gone, the confounder length is again the
same as the cipher blocksize for every implemented enctype. The
gss_krb5_enctype::conflen field is no longer necessary.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It is not clear from documenting comments, specifications, or code
usage what value the gss_krb5_enctype.blocksize field is supposed
to store. The "encryption blocksize" depends only on the cipher
being used, so that value can be derived where it's needed instead
of stored as a constant.
RFC 3961 Section 5.2 says:
> cipher block size, c
> This is the block size of the block cipher underlying the
> encryption and decryption functions indicated above, used for key
> derivation and for the size of the message confounder and initial
> vector. (If a block cipher is not in use, some comparable
> parameter should be determined.) It must be at least 5 octets.
>
> This is not actually an independent parameter; rather, it is a
> property of the functions E and D. It is listed here to clarify
> the distinction between it and the message block size, m.
In the Linux kernel's implemenation of the SunRPC RPCSEC GSS
Kerberos 5 mechanism, the cipher block size, which is dependent on
the encryption and decryption transforms, is used only in
krb5_derive_key(), so it is straightforward to replace it.
Tested-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Eliminate the use of bus-locked operations in svc_xprt_enqueue(),
which is a hot path. Replace them with per-cpu variables to reduce
cross-CPU memory bus traffic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that svcauth_gss_prepare_to_wrap() no longer computes the
location of RPC header fields in the response buffer,
svcauth_gss_accept() can save the location of the databody
rather than the location of the verifier.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
To navigate around the space that svcauth_gss_accept() reserves
for the RPC payload body length and sequence number fields,
svcauth_gss_release() does a little dance with the reply's
accept_stat, moving the accept_stat value in the response buffer
down by two words.
Instead, let's have the ->accept() methods each set the proper
final location of the accept_stat to avoid having to move
things.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, svcauth_gss_accept() pre-reserves response buffer space
for the RPC payload length and GSS sequence number before returning
to the dispatcher, which then adds the header's accept_stat field.
The problem is the accept_stat field is supposed to go before the
length and seq_num fields. So svcauth_gss_release() has to relocate
the accept_stat value (see svcauth_gss_prepare_to_wrap()).
To enable these fields to be added to the response buffer in the
correct (final) order, the pointer to the accept_stat has to be made
available to svcauth_gss_accept() so that it can set it before
reserving space for the length and seq_num fields.
As a first step, move the pointer to the location of the accept_stat
field into struct svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The main part of RPC header encoding and the formation of error
responses are now done using the xdr_stream helpers. Bounds checking
before each XDR data item is encoded makes the server's encoding
path safer against accidental buffer overflows.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that each ->accept method has been converted, the
svcxdr_init_encode() calls can be hoisted back up into the generic
RPC server code.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header encoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This code constructs replies to the decorated NULL procedure calls
that establish GSS contexts. Convert this code path to use struct
xdr_stream to encode such responses.
Done as part of hardening the server-side RPC header encoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We're now moving svcxdr_init_encode() to /before/ the flavor's
->accept method has set rq_auth_slack. Add a helper that can
set rq_auth_slack /after/ svcxdr_init_encode() has been called.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header encoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header encoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header encoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_encode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 5531 defines an MSG_ACCEPTED Reply message like this:
struct accepted_reply {
opaque_auth verf;
union switch (accept_stat stat) {
case SUCCESS:
...
In the current server code, struct opaque_auth encoding is open-
coded. Introduce a helper that encodes an opaque_auth data item
within the context of a xdr_stream.
Done as part of hardening the server-side RPC header decoding and
encoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no RPC header field called rpc_stat; more precisely, the
variable appears to be recording an accept_stat value. But it looks
like we don't need to preserve this value at all, actually, so
simply remove the variable.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 5b304bc5bf ("[PATCH] knfsd: svcrpc: gss: fix failure on
SVC_DENIED in integrity case") added a check to prevent wrapping an
RPC response if reply_stat == MSG_DENIED, assuming that the only way
to get to svcauth_gss_release() with that reply_stat value was if
the reject_stat was AUTH_ERROR (reject_stat == MISMATCH is handled
earlier in svc_process_common()).
The code there is somewhat confusing. For one thing, rpc_success is
an accept_stat value, not a reply_stat value. The correct reply_stat
value to look for is RPC_MSG_DENIED. It happens to be the same value
as rpc_success, so it all works out, but it's not terribly readable.
Since commit 438623a06b ("SUNRPC: Add svc_rqst::rq_auth_stat"),
the actual auth_stat value is stored in the svc_rqst, so that value
is now available to svcauth_gss_prepare_to_wrap() to make its
decision to wrap, based on direct information about the
authentication status of the RPC caller.
No behavior change is intended, this simply replaces some old code
with something that should be more self-documenting.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Actually xdr_stream does not add value here because of how
gss_wrap() works. This is just a clean-up patch.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Simplify the references to the head and tail iovecs for readability.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Match the error reporting in the other unwrap and wrap functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up variable names to match the other unwrap and wrap
functions.
Additionally, the explicit type cast on @gsd in unnecessary; and
@resbuf is renamed to match the variable naming in the unwrap
functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace finicky logic: Instead of trying to find scratch space in
the response buffer, use the scratch buffer from struct
gss_svc_data.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
An error computing the checksum here is an exceptional event.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Additionally, the explicit type cast on @gsd is unnecessary; and
@resbuf is renamed to match the variable naming in the unwrap
functions.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that upper layers use an xdr_stream to track the construction
of each RPC Reply message, resbuf->len is kept up-to-date
automatically. There's no need to recompute it in svc_gss_release().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now the entire RPC Call header parsing path is handled via struct
xdr_stream-based decoders.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: With xdr_stream decoding, the @argv parameter is no longer
used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: Saving the RPC program number in two places is
unnecessary.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that each ->accept method has been converted to use xdr_stream,
the svcxdr_init_decode() calls can be hoisted back up into the
generic RPC server code.
The dprintk in svc_authenticate() is removed, since
trace_svc_authenticate() reports the same information.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Micro-optimizations:
1. The value of rqstp->rq_auth_stat is replaced no matter which
arm of the switch is taken, so the initial assignment can be
safely removed.
2. Avoid checking the value of gc->gc_proc twice in the I/O
(RPC_GSS_PROC_DATA) path.
The cost is a little extra code redundancy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
For readability, I'm also going to rename the unwrap and wrap
functions in a consistent manner, starting with unwrap_integ_data().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up / code de-duplication - this functionality is already
available in the generic XDR layer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The entire RPC_GSS_PROC_INIT path is converted over to xdr_stream
for decoding the Call credential and verifier.
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
gss_read_verf() is already short. Fold it into its only caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
gss_read_common_verf() is now just a wrapper for dup_netobj(), thus
it can be replaced with direct calls to dup_netobj().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since upcalls are infrequent, ensure the compiler places the upcall
mechanism out-of-line from the I/O path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Since the server-side of the Linux kernel SunRPC implementation
ignores the contents of the Call's machinename field, there's no
need for its RPC_AUTH_UNIX authenticator to reject names that are
larger than UNX_MAXNODENAME.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 5531 defines the body of an RPC Call message like this:
struct call_body {
unsigned int rpcvers;
unsigned int prog;
unsigned int vers;
unsigned int proc;
opaque_auth cred;
opaque_auth verf;
/* procedure-specific parameters start here */
};
In the current server code, decoding a struct opaque_auth type is
open-coded in several places, and is thus difficult to harden
everywhere.
Introduce a helper for decoding an opaque_auth within the context
of a xdr_stream. This helper can be shared with all authentication
flavor implemenations, even on the client-side.
Done as part of hardening the server-side RPC header decoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_decode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When swap is activated to a file on an NFSv4 mount we arrange that the
state manager thread is always present as starting a new thread requires
memory allocations that might block waiting for swap.
Unfortunately the code for allowing the state manager thread to exit when
swap is disabled was not tested properly and does not work.
This can be seen by examining /proc/fs/nfsfs/servers after disabling swap
and unmounting the filesystem. The servers file will still list one
entry. Also a "ps" listing will show the state manager thread is still
present.
There are two problems.
1/ rpc_clnt_swap_deactivate() doesn't walk up the ->cl_parent list to
find the primary client on which the state manager runs.
2/ The thread is not woken up properly and it immediately goes back to
sleep without checking whether it is really needed. Using
nfs4_schedule_state_manager() ensures a proper wake-up.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 4dc73c6791 ("NFSv4: keep state manager thread active if swap is enabled")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
-----BEGIN PGP SIGNATURE-----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=/7AX
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a race when creating NFSv4 files
- Revert the use of relaxed bitops
* tag 'nfsd-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Use set_bit(RQ_DROPME)
Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"
nfsd: fix handling of cached open files in nfsd4_open codepath
Highlights include:
Bugfixes
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
-----BEGIN PGP SIGNATURE-----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=N6cT
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Found via KCSAN.
Fixes: 28df098881 ("SUNRPC: Use RMW bitops in single-threaded hot paths")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
Commit 9130b8dbc6 ("SUNRPC: allow for upcalls for the same uid
but different gss service") introduced `auth` argument to
__gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL
since it (and auth->service) was not (yet) determined.
When multiple upcalls with the same uid and different service are
ongoing, it could happen that __gss_find_upcall(), which returns the
first match found in the pipe->in_downcall list, could not find the
correct gss_msg corresponding to the downcall we are looking for.
Moreover, it might return a msg which is not sent to rpc.gssd yet.
We could see mount.nfs process hung in D state with multiple mount.nfs
are executed in parallel. The call trace below is of CentOS 7.9
kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/
elrepo kernel-ml-6.0.7-1.el7.
PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs"
#0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f
#1 [ffff9203ca323580] schedule at ffffffffa3b88eb9
#2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss]
#3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc
[sunrpc]
#4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss]
#5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc]
#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc]
#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc]
#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc]
#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc]
The scenario is like this. Let's say there are two upcalls for
services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe.
When rpc.gssd reads pipe to get the upcall msg corresponding to
service B from pipe->pipe and then writes the response, in
gss_pipe_downcall the msg corresponding to service A will be picked
because only uid is used to find the msg and it is before the one for
B in pipe->in_downcall. And the process waiting for the msg
corresponding to service A will be woken up.
Actual scheduing of that process might be after rpc.gssd processes the
next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A).
The process is scheduled to see gss_msg->ctx == NULL and
gss_msg->msg.errno == 0, therefore it cannot break the loop in
gss_create_upcall and is never woken up after that.
This patch adds a simple check to ensure that a msg which is not
sent to rpc.gssd yet is not chosen as the matching upcall upon
receiving a downcall.
Signed-off-by: minoura makoto <minoura@valinux.co.jp>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com>
Cc: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9130b8dbc6 ("SUNRPC: allow for upcalls for same uid but different gss service")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Highlights include:
Bugfixes
- Fix a NULL pointer dereference in the mount parser
- Fix a memory stomp in decode_attr_security_label
- Fix a credential leak in _nfs4_discover_trunking()
- Fix a buffer leak in rpcrdma_req_create()
- Fix a leaked socket in rpc_sockname()
- Fix a deadlock between nfs4_open_recover_helper() and delegreturn
- Fix an Oops in nfs_d_automount()
- Fix a potential race in nfs_call_unlink()
- Multiple fixes for the open context mode
- NFSv4.2 READ_PLUS fixes
- Fix a regression in which small rsize/wsize values are being forbidden
- Fail client initialisation if the NFSv4.x state manager thread can't run
- avoid spurious warning of lost lock that is being unlocked.
- Ensure the initialisation of struct nfs4_label
Features and cleanups
- Trigger the "ls -l" readdir heuristic sooner
- Clear the file access cache upon login to ensure supplementary group
info is in sync between the client and server
- pnfs: Fix up the logging of layout stateids
- NFSv4.2: Change the default KConfig value for READ_PLUS
- Use sysfs_emit() instead of scnprintf() where appropriate
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESQctxSBg8JpV8KqEZwvnipYKAPIFAmOYmTQACgkQZwvnipYK
APLxWw//dAFjHXc3YOLi1J94nINZbOyAvdS2WAPVLRfMh8mEln9JAxVsUREz279N
02EFbW/ZAN3nd2SGdYgbdzTIIJ154LlDS9DmIdwgqK2I/tEZauFeDTpTBDIDNwMg
eruU4twttbgrE7lgVlE0ZDGlvMNFao462BriPeEN+WaaqQWB2NqMp/qoh1i4mbcn
rQPPiovn0LiW5K5ulMT5OFz9y4I4oNaJV77sPSUew0M0iLbGtI1OdrF844+8gzb0
BeMW/ArvM5TpuwMOGmzdt4pql8MTPf4qvcnafiMX69Eg2asGijZlr/AxOpSOYXSl
LDmAXczQ0VSsXYkKI2bJz1d5xWeFL4ZJVsaR8W/M4aewgqHWtAIs/b+Gk2x/S+Zo
s1lGFrHrvzhXd/c8LxuH+LBUxLqy6nep0sVWKOK/eQ79BUo8lLwev8YbNk8Sk4Rh
N2SrcJQeHu9uYKUbWuRWt5r2L9ffYVcSQQfEk5IzCvRuz6B7sFXtwNJK8rPjz78/
LLHNokQIPHUTYUa2P+zKwozwSwOc6y6eqEhxH8CvDJlo5OfDvT+9deyNb8ZOUxiq
UXHXG2qQivU0wTaqoowLp8D8FT3MQB9KkUZkikGf9d884qXgbWipx0kGOp+Y6JJp
JesK1KxcxtKZRiywBSz6fhWW78VknYWf4RR6cESjgpUSbuvblfE=
=Mz1l
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust
"Bugfixes:
- Fix NULL pointer dereference in the mount parser
- Fix memory stomp in decode_attr_security_label
- Fix credential leak in _nfs4_discover_trunking()
- Fix buffer leak in rpcrdma_req_create()
- Fix leaked socket in rpc_sockname()
- Fix deadlock between nfs4_open_recover_helper() and delegreturn
- Fix an Oops in nfs_d_automount()
- Fix potential race in nfs_call_unlink()
- Multiple fixes for the open context mode
- NFSv4.2 READ_PLUS fixes
- Fix a regression in which small rsize/wsize values are being
forbidden
- Fail client initialisation if the NFSv4.x state manager thread
can't run
- Avoid spurious warning of lost lock that is being unlocked.
- Ensure the initialisation of struct nfs4_label
Features and cleanups:
- Trigger the "ls -l" readdir heuristic sooner
- Clear the file access cache upon login to ensure supplementary
group info is in sync between the client and server
- pnfs: Fix up the logging of layout stateids
- NFSv4.2: Change the default KConfig value for READ_PLUS
- Use sysfs_emit() instead of scnprintf() where appropriate"
* tag 'nfs-for-6.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4.2: Change the default KConfig value for READ_PLUS
NFSv4.x: Fail client initialisation if state manager thread can't run
fs: nfs: sysfs: use sysfs_emit() to instead of scnprintf()
NFS: use sysfs_emit() to instead of scnprintf()
NFS: Allow very small rsize & wsize again
NFSv4.2: Fix up READ_PLUS alignment
NFSv4.2: Set the correct size scratch buffer for decoding READ_PLUS
SUNRPC: Fix missing release socket in rpc_sockname()
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
NFS: avoid spurious warning of lost lock that is being unlocked.
nfs: fix possible null-ptr-deref when parsing param
NFSv4: check FMODE_EXEC from open context mode in nfs4_opendata_access()
NFS: make sure open context mode have FMODE_EXEC when file open for exec
NFS4.x/pnfs: Fix up logging of layout stateids
NFS: Fix a race in nfs_call_unlink()
NFS: Fix an Oops in nfs_d_automount()
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
NFS: Trigger the "ls -l" readdir heuristic sooner
NFSv4.2: Fix initialisation of struct nfs4_label
...
This release introduces support for the CB_RECALL_ANY operation.
NFSD can send this operation to request that clients return any
delegations they choose. The server uses this operation to handle
low memory scenarios or indicate to a client when that client has
reached the maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily
whilst support for sparse files in local filesystems and the VFS is
improved.
Two major data structure fixes appear in this release:
* The nfs4_file hash table is replaced with a resizable hash table
to reduce the latency of NFSv4 OPEN operations.
* Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2
to be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree.
-----BEGIN PGP SIGNATURE-----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=jNlu
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release introduces support for the CB_RECALL_ANY operation. NFSD
can send this operation to request that clients return any delegations
they choose. The server uses this operation to handle low memory
scenarios or indicate to a client when that client has reached the
maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
support for sparse files in local filesystems and the VFS is improved.
Two major data structure fixes appear in this release:
- The nfs4_file hash table is replaced with a resizable hash table to
reduce the latency of NFSv4 OPEN operations.
- Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2 to
be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree"
* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
NFSD: Avoid clashing function prototypes
SUNRPC: Fix crasher in unwrap_integ_data()
SUNRPC: Make the svc_authenticate tracepoint conditional
NFSD: Use only RQ_DROPME to signal the need to drop a reply
SUNRPC: Clean up xdr_write_pages()
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
NFSD: add CB_RECALL_ANY tracepoints
NFSD: add delegation reaper to react to low memory condition
NFSD: add support for sending CB_RECALL_ANY
NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
trace: Relocate event helper files
NFSD: pass range end to vfs_fsync_range() instead of count
lockd: fix file selection in nlmsvc_cancel_blocked
lockd: ensure we use the correct file descriptor when unlocking
lockd: set missing fl_flags field when retrieving args
NFSD: Use struct_size() helper in alloc_session()
nfsd: return error if nfs4_setacl fails
lockd: set other missing fields when unlocking files
NFSD: Add an nfsd_file_fsync tracepoint
sunrpc: svc: Remove an unused static function svc_ungetu32()
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
- Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and the
work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown
timer. Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync() should
be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding rearm
attempts silently. A warning for the case that a rearm attempt of a
shutdown timer is detected would not be really helpful because it's
entirely unclear how it should be acted upon. The only way to address
such a case is to add 'if (in_shutdown)' conditionals all over the
place. This is error prone and in most cases of teardown not required
all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
- Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=JlDe
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and drivers:
Core:
- The timer_shutdown[_sync]() infrastructure:
Tearing down timers can be tedious when there are circular
dependencies to other things which need to be torn down. A prime
example is timer and workqueue where the timer schedules work and
the work arms the timer.
What needs to prevented is that pending work which is drained via
destroy_workqueue() does not rearm the previously shutdown timer.
Nothing in that shutdown sequence relies on the timer being
functional.
The conclusion was that the semantics of timer_shutdown_sync()
should be:
- timer is not enqueued
- timer callback is not running
- timer cannot be rearmed
Preventing the rearming of shutdown timers is done by discarding
rearm attempts silently.
A warning for the case that a rearm attempt of a shutdown timer is
detected would not be really helpful because it's entirely unclear
how it should be acted upon. The only way to address such a case is
to add 'if (in_shutdown)' conditionals all over the place. This is
error prone and in most cases of teardown not required all.
- The real fix for the bluetooth HCI teardown based on
timer_shutdown_sync().
A larger scale conversion to timer_shutdown_sync() is work in
progress.
- Consolidation of VDSO time namespace helper functions
- Small fixes for timer and timerqueue
Drivers:
- Prevent integer overflow on the XGene-1 TVAL register which causes
an never ending interrupt storm.
- The usual set of new device tree bindings
- Small fixes and improvements all over the place"
* tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support
dt-bindings: timer: renesas,tmu: Add r8a779g0 support
clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()
clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
clocksource/drivers/timer-ti-dm: Clear settings on probe and free
clocksource/drivers/timer-ti-dm: Make timer_get_irq static
clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use
dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
clockevents: Repair kernel-doc for clockevent_delta2ns()
clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct
clocksource/drivers/sh_cmt: Access registers according to spec
vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy
Bluetooth: hci_qca: Fix the teardown problem for real
timers: Update the documentation to reflect on the new timer_shutdown() API
timers: Provide timer_shutdown[_sync]()
timers: Add shutdown mechanism to the internal functions
timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode
...
If a zero length is passed to kmalloc() it returns 0x10, which is
not a valid address. gss_verify_mic() subsequently crashes when it
attempts to dereference that pointer.
Instead of allocating this memory on every call based on an
untrusted size value, use a piece of dynamically-allocated scratch
memory that is always available.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Clean up: Simplify the tracepoint's only call site.
Also, I noticed that when svc_authenticate() returns SVC_COMPLETE,
it leaves rq_auth_stat set to an error value. That doesn't need to
be recorded in the trace log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Make it more evident how xdr_write_pages() updates the tail buffer
by using the convention of naming the iov pointer variable "tail".
I spent more than a couple of hours chasing through code to
understand this, so someone is likely to find this useful later.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Matthew Wilcox (Oracle)