This patch switches the driver from legacy gpio API to the newer
gpiod API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Nearly all other firmware environments have some way of passing a RNG
seed to initialize the RNG: DTB's rng-seed, EFI's RNG protocol, m68k's
bootinfo block, x86's setup_data, and so forth. This adds something
similar for MIPS, which will allow various firmware environments,
bootloaders, and hypervisors to pass an RNG seed to initialize the
kernel's RNG.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use macro definitions ___constant_swab64 and ___constant_swab32
to simplify __bswapdi2() and __bswapsi2().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Silence the following two warnings when make W=1:
CC arch/mips/lib/bswapsi.o
arch/mips/lib/bswapsi.c:5:22: warning: no previous prototype for '__bswapsi2' [-Wmissing-prototypes]
unsigned int notrace __bswapsi2(unsigned int u)
^~~~~~~~~~
CC arch/mips/lib/bswapdi.o
arch/mips/lib/bswapdi.c:5:28: warning: no previous prototype for '__bswapdi2' [-Wmissing-prototypes]
unsigned long long notrace __bswapdi2(unsigned long long u)
^~~~~~~~~~
AR arch/mips/lib/built-in.a
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file
For some detailed information, see Link.
Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of allocate_irqno() have been removed by
commit 69a07a41d9 ("MIPS: SGI-IP27: rework HUB interrupts"),
so remove the orphan declaration.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of sb1250_time_init() have been removed by
commit d527eef5b7 ("[MIPS] Sibyte: Finish conversion to modern
time APIs."), so remove the orphan declaration.
The comments about sb1250_time_init() is useless in arch_init_irq(),
so remove these comments.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This switches vmmc to use gpiod API instead of OF-specific legacy gpio
API that we want to stop exporting from gpiolib.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch is needed to handle interrupts by the second VPE on the Lantiq
ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
the second VPE results in a hang. Currently, the vsmp_init_secondary()
function is responsible for enabling these interrupts. It only enables
Malta-specific interrupts (SW0, SW1, HW4 and HW5).
The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
interrupts are wired to an ICU instance. Each VPE has an independent
instance of the ICU. The mapping of the ICU interrupts is shown below:
SW0(IP0) - IPI call,
SW1(IP1) - IPI resched,
HW0(IP2) - ICU 0-31,
HW1(IP3) - ICU 32-63,
HW2(IP4) - ICU 64-95,
HW3(IP5) - ICU 96-127,
HW4(IP6) - ICU 128-159,
HW5(IP7) - timer.
This patch enables all interrupt lines on the second VPE.
This problem affects multithreaded SoCs with a custom interrupt controller.
SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
future, this may be replaced with some generic solution.
Tested on Lantiq xRX200.
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clang is especially sensitive about argument type matching when using
__overloaded functions (like memcmp(), etc). Help it see that function
pointers are just "void *". Avoids this error:
arch/mips/bcm47xx/prom.c:89:8: error: no matching function for call to 'memcmp'
if (!memcmp(prom_init, prom_init + mem, 32))
^~~~~~
include/linux/string.h:156:12: note: candidate function not viable: no known conversion from 'void (void)' to 'const void *' for 1st argument extern int memcmp(const void *,const void *,__kernel_size_t);
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: llvm@lists.linux.dev
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202209080652.sz2d68e5-lkp@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of ar7_cpu_clock, ar7_bus_clock and ar7_dsp_clock were
removed by commit 780019ddf0 ("MIPS: AR7: Implement clock API"),
so remove the orphan declarations, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of sni_cpu_time_init() were removed by
commit 4b550488f8 ("[MIPS] Deforest the function pointer jungle
in the time code."), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of free_irqno() and alloc_legacy_irqno() were removed
by commit 69a07a41d9 ("MIPS: SGI-IP27: rework HUB interrupts"),
so remove the orphan declarations, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of octeon_hal_setup_reserved32() were removed by
commit 1ef2887030 ("MIPS: Octeon: Remove vestiges of
CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB"), so remove the
orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of cvmx_fpa_setup_pool() were removed by
commit a03822ea5d ("MIPS: OCTEON: Remove some unused files."),
so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of octeon_swiotlb were removed by
commit f39f8d0eb0 ("MIPS/octeon: use swiotlb_init instead
of open coding it"), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All uses of sbx00_acpi_init() in the "pci.c" file were removed by
commit 5831fdb099 ("MIPS: Loongson2ef: clean up loongson64
related code"), so remove the orphan declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
TWD is an MFD block that contains timers, watchdog & some clocks / reset
controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.
Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.
Fixes: 5dc76a96e9 ("MIPS: PCI: use information from 1-wire PROM for IOC3 detection")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In error case in bridge_platform_create after calling
platform_device_add()/platform_device_add_data()/
platform_device_add_resources(), release the failed
'pdev' or it will be leak, call platform_device_put()
to fix this problem.
Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd',
use platform_device_unregister() to release sgi_w1
resources when xtalk-bridge registration fails.
Fixes: fd27234f24 ("MIPS: add support for SGI Octane (IP30)")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
commit 0060c87833 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.
Fixes: 0060c87833 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The lantiq WDT driver uses clk_get_io(), which is not exported,
so export it to fix a build error:
ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!
Fixes: 287e3f3f4e ("MIPS: lantiq: implement support for clkdev api")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rename lantiq dts files with soc name being the prefix, so that the
board dts file can be located easily by soc name, and we also gain
the consistency of naming.
This patch is a preparation for the addition of dts for newer SoCs
(Lantiq ARX100, VRX200 and xRX330).
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove the repeated word "as" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Don't use "/**" kernel-doc notation for comments that are not in
kernel-doc format.
Eliminates one warning:
arch/mips/pci/pci-ar2315.c:6: warning: This comment starts with
'/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
* Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The double `it' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
-----BEGIN PGP SIGNATURE-----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=djqb
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
Commit c461731836 ("MIPS: Add NUMA support for Loongson-3") has increased
.bss size of the Octeon kernel from 16k to 16M. Providing the conditions
for SPARSEMEM_EXTREME avoids the waste of memory.
Thomas has tested the loogsoon64 kernel, where .bss is being reduced by
this patch from 16.5M to 515k.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:
WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698
Use irq_alloc_desc_at() to avoid the above problem.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some of them were pointless because CONFIG_CAVIUM_RESERVE32 is now always
defined, some were not enough (Yu Zhao reported
"Failed to allocate CAVIUM_RESERVE32 memory area" error).
Removing the directives allows for compiler coverage of RESERVE32 code and
replacing one of [always-true] "ifdef" with a compiler conditional fixes
the [cosmetic] error message.
Fixes: 3e3114ac46 ("MIPS: Introduce CAVIUM_RESERVE32 Kconfig option")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The RTCCTRL reg of LS1C is obselete.
Writing this reg will cause system hang.
Fixes: 60219c563c ("MIPS: Add RTC support for Loongson1C board")
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_PRIVATE_MEM_SLOTS defaults to zero, so it is not necessary to
define it in MIPS's asm/kvm_host.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make the
tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also
included in here is the obligatory n_gsm updates from Daniel Starke and
lots of tiny driver updates and minor fixes and tweaks for other smaller
serial drivers.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYvD8qA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfEQCdGiYLQkWUUarhnlocHo+kSm5vkvsAnicZg7Sl
IQBeAidA3dZEQO0lLlM5
=t7Yh
-----END PGP SIGNATURE-----
Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
removed support for VR41xx SoC and platforms based on it
cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=TuYr
-----END PGP SIGNATURE-----
Merge tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Netgear WNR3500L v2
- removed support for VR41xx SoC and platforms based on it
- cleanups and fixes
* tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits)
MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32"
MIPS: Introduce CAVIUM_RESERVE32 Kconfig option
MIPS: msi-octeon: eliminate kernel-doc warnings
MIPS: Fix comment typo
MIPS: BMIPS: Utilize cfe_die() for invalid DTB
MIPS: CFE: Add cfe_die()
MIPS: Fixed __debug_virt_addr_valid()
MIPS: BCM47XX: Add support for Netgear WNR3500L v2
MIPS: Remove VR41xx support
MIPS: dts: align gpio-key node names with dtschema
MIPS: dts: correct gpio-keys names and properties
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
MIPS: Make phys_to_virt utilize __va()
MIPS: vdso: Utilize __pa() for gic_pfn
MIPS: mm: Use the bitmap API to allocate bitmaps
MIPS: math-emu: Use the bitmap API to allocate bitmaps
MIPS: Loongson64: Fix section mismatch warning
mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
MIPS: mscc: ocelot: enable FDMA usage
...
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
-----BEGIN PGP SIGNATURE-----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=9TAR
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
When CONFIG_XPA is enabled, Clang warns:
arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
2 errors generated.
_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.
According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays
with flexible-array members in UAPI. This patch has been baking in
linux-next for 5 weeks now.
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmLoNdcACgkQRwW0y0cG
2zEVeg//QYJ3j2pbKt9zB6muO3SkrNoMPc5wpY/SITUeiDscukLvGzJG88eIZskl
NaEjbmacHmdlQrBkUdr10i1+hkb2zRd6/j42GIDXEhhKTMoT2UxJCBp47KSvd7VY
dKNLGsgQs3kwmmxLEGu6w6vywWpI5wxXTKWL1Q/RpUXoOnLmsMEbzKTjf12a1Edl
9gPNY+tMHIHyB0pGIRXDY/ZF5c+FcRFn6kKeMVzJL0bnX7FI4UmYe83k9ajEiLWA
MD3JAw/mNv2X0nizHHuQHIjtky8Pr+E8hKs5ni88vMYmFqeABsTw4R1LJykv/mYa
NakU1j9tHYTKcs2Ju+gIvSKvmatKGNmOpti/8RAjEX1YY4cHlHWNsigVbVRLqfo7
SKImlSUxOPGFS3HAJQCC9P/oZgICkUdD6sdLO1PVBnE1G3Fvxg5z6fGcdEuEZkVR
PQwlYDm1nlTuScbkgVSBzyU/AkntVMJTuPWgbpNo+VgSXWZ8T/U8II0eGrFVf9rH
+y5dAS52/bi6OP0la7fNZlq7tcPfNG9HJlPwPb1kQtuPT4m6CBhth/rRrDJwx8za
0cpJT75Q3CI0wLZ7GN4yEjtNQrlAeeiYiS4LMQ/SFFtg1KzvmYYVmWDhOf0+mMDA
f7bq4cxEg2LHwrhRgQQWowFVBu7yeiwKbcj9sybfA27bMqCtfto=
=8yMq
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull uapi flexible array update from Gustavo Silva:
"A treewide patch that replaces zero-length arrays with flexible-array
members in UAPI. This has been baking in linux-next for 5 weeks now.
'-fstrict-flex-arrays=3' is coming and we need to land these changes
to prevent issues like these in the short future:
fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly
zero. If this breaks anything, we can use a union with a new member
name"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
* tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: uapi: Replace zero-length arrays with flexible-array members
This pull request contains the following branches:
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
be offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS
and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
boot parameter prevents offloaded callbacks from interfering
with real-time workloads and with energy-efficiency mechanisms.
poll.2022.07.21a: Polled grace-period updates, perhaps most notably
making these APIs account for both normal and expedited grace
periods.
rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
the CPU overhead of RCU tasks trace grace periods by more than
a factor of two on a system with 15,000 tasks. The reduction
is expected to increase with the number of tasks, so it seems
reasonable to hypothesize that a system with 150,000 tasks might
see a 20-fold reduction in CPU overhead.
torture.2022.06.21a: Torture-test updates.
ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
context tracking, thus reducing the overhead of transitioning to
kernel mode from either idle or nohz_full userspace execution
for kernels that track context independently of RCU. This is
expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y.
-----BEGIN PGP SIGNATURE-----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=vUNm
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----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=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
- lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives
that can lose the lock_type & cause false reports. No such mishap was
observed in the wild.
- jump_label improvements: simplify the cross-arch support of
initial NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4B89
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
