LPASS now has integrated codec control whose clocks are controlled by Q6DSP.
This patch adds support to those clocks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously there was no case where we need to set clock or send commands
that are not associated with q6afe ports, now we have cases like clock
voting and clock consumers like codecs that needed these clocks.
update q6afe_set_param() to support such cases, including token passing.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases like clocks q6afe would have to process commands
without an associated q6afe port, in such cases waitqueue is
required at global level to wait for the command to finish.
This patch also adds the command result to go with this waitqueue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update afe_apr_send_pkt() to take response opcode that it should wait for.
This is helpful in cases where we expect response other than the
actual command opcode.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
New LPASS supports various codec macros, DSP firmware already
has support to those ports. Add corresponding configuration
support to those ports in adsp drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200910101732.23484-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The new SPDIF TX controller is a serial port compliant with the IEC-
60958 standard. It also supports programmable User Data and Channel
Status fields.
This IP is embedded in Microchip's sama7g5 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200909145348.367033-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC TXx9 ACLC driver, a tasklet
is still used for offloading the hardware reset function. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in TXx9 ACLC driver with a
simple work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC SH SIU driver, a tasklet is
still used for offloading the hardware reset function. It can be
achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in SH SIU driver with a simple
work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The tasklet is an old API that should be deprecated, usually can be
converted to another decent API. In ASoC FSL ESAI CPU DAI driver, a
tasklet is still used for offloading the hardware reset function.
It can be achieved gracefully with a work queued, too.
This patch replaces the tasklet usage in fsl esai driver with a simple
work. The conversion is fairly straightforward.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200903104749.21435-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.
The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev.
This patch set allows specifying them in the device tree through
a new "aux-devs" property.
v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold.net/
Changes in v2:
- Fix value type in device tree bindings:
aux-devs should be array of phandles without any arguments, so change
<phandles with arguments> -> <array of phandles>
Stephan Gerhold (2):
ASoC: dt-bindings: qcom: Document "aux-devs" property
ASoC: qcom: common: Parse auxiliary devices from device tree
.../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 7 +++++++
Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 8 ++++++++
Documentation/devicetree/bindings/sound/qcom,sdm845.txt | 8 ++++++++
sound/soc/qcom/common.c | 4 ++++
4 files changed, 27 insertions(+)
--
2.28.0
if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: 7e7292dba2 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200825130224.1488694-1-yukuai3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases we need to probe additional audio components that do
not appear as part of the DAI links specified in the device tree.
Examples for this are auxiliary devices such as analog amplifiers
or codecs.
The ASoC core provides a way to probe these components by adding
them to snd_soc_card->aux_dev. We can use the snd_soc_of_parse_aux_devs()
function to parse them from the device tree.
As an example for this, some MSM8916 smartphones have an analog
speaker amplifier connected to the HPHR output. With the new property
this can be modelled as follows:
speaker-amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amp";
};
&sound {
aux-devs = <&speaker_amp>;
audio-routing = "Speaker Amp IN", "HPHR";
};
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200826095141.94017-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt6359 platform device is instantiated by mfd_add_devices(). In the
case, dev->of_node is NULL so that mt6359_parse_dt() always fails to
parse the desired DT properties.
Gets the DT properties via dev->parent->of_node.
Fixes: 8061734ab6 ("ASoC: mediatek: mt6359: add codec driver")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200908070044.1142644-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the snd_sof_bytes_ext_volatile_get() to read the
actual parameters from DSP by sending the SOF_IPC_COMP_GET_DATA IPC
for the kcontrol of type SOF_TPLG_KCTL_BYTES_VOLATILE_RO.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for write-only and read-only TLV byte kcontrols
by checking for appropriate get/put IO handlers.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200908092825.1813847-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial machine driver supports only j721e-cpb and the ivi addon, but
other EVMs for different K3 SoC can have similar audio setup which can
be supported by the driver with small or no modification.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200908113204.12012-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the fixes series is merged, here is a series of small cleanups
to the sun8i-codec driver. These help shorten the patch stack for the
next series, which will add support for the other two DAIs in this
codec: AIF2 and AIF3.
Samuel Holland (9):
ASoC: sun8i-codec: Remove extraneous widgets
ASoC: sun8i-codec: Fix AIF1 MODCLK widget name
ASoC: sun8i-codec: Fix AIF1_ADCDAT_CTRL field names
ASoC: sun8i-codec: Fix AIF1_MXR_SRC field names
ASoC: sun8i-codec: Fix ADC_DIG_CTRL field name
ASoC: sun8i-codec: Fix field bit number indentation
ASoC: sun8i-codec: Sort masks in a consistent order
ASoC: sun8i-codec: Attach the bus clock to the regmap
ASoC: sun8i-codec: Manage module clock via DAPM
sound/soc/sunxi/sun8i-codec.c | 104 ++++++++++++----------------------
1 file changed, 37 insertions(+), 67 deletions(-)
--
2.26.2
This series adds support for UUID based component identification
in SOF. UUIDs provide a more scalable alternative to the old
component type based approach to identify which DSP components
should be loaded.
More detailed description of UUID usage in SOF is available in:
https://thesofproject.github.io/latest/developer_guides/uuid/
UUID support is an incremental update to the SOF IPC interface. Driver
remains compatible with pre-UUID (ABI <3.17) firmware versions.
Keyon Jie (16):
ASoC: SOF: tokens: add token for component UUID
ASoC: SOF: add comp_ext to struct snd_sof_widget
ASoC: SOF: topology: create component extended tokens
ASoC: SOF: topology: parse comp_ext_tokens for all widgets
ASoC: SOF: use the sof_ipc_comp reserved bytes for extended data
ASoC: SOF: topology: add helper for setting up IPC component
ASoC: SOF: append extended data to sof_ipc_comp_dai
ASoC: SOF: append extended data to sof_ipc_comp_mixer
ASoC: SOF: append extended data to sof_ipc_comp_volume
ASoC: SOF: append extended data to sof_ipc_comp_host
ASoC: SOF: append extended data to sof_ipc_comp_src
ASoC: SOF: append extended data to sof_ipc_comp_asrc
ASoC: SOF: append extended data to sof_ipc_comp_tone
ASoC: SOF: append extended data to sof_ipc_comp_process
ASoC: SOF: append extended data to sof_ipc_comp_mux
ASoC: SOF: topology: make process type optional
include/sound/sof/topology.h | 12 +-
include/uapi/sound/sof/tokens.h | 1 +
sound/soc/sof/sof-audio.c | 23 +++-
sound/soc/sof/sof-audio.h | 3 +
sound/soc/sof/topology.c | 208 ++++++++++++++++++++------------
5 files changed, 161 insertions(+), 86 deletions(-)
--
2.27.0
To set platform in slave mode setting the MASTER_MODE bit is not needed.
Removing !MASTER_MODE conditional to avoid potential errors and warning.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200904020904.19577-1-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As components can be now identified with a UUID based mechanism, the
process type is no longer required. For new DSP components, process and
its component type can be set to SOF_PROCESS_NONE and SOF_COMP_NONE.
Allow this combination in topology load, modify the load time check for
process type to reflect this.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-17-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mux,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-16-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_process,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-15-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_tone,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-14-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_asrc,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-13-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_src,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-12-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_host,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-11-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_volume,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_mixer,
construct the ipc for COMP_NEW during the topology load stage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Append the extended data to the end of the struct sof_ipc_comp_dai, and
update the ext_data_offset, to construct the IPC for the topology load
and runtime restore.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to allocate buffer for IPC component, configure the basic
settings, and set up the extended data for the subsequent IPC sending.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse comp_ext_tokens in the common sof_widget_ready(), and the
swidget->comp_ext will be used to construct the COMP_NEW ipc in the
subsequent commits.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comp_ext_tokens which will be used to parse all extended tokens,
these tokens will be stored it to struct snd_sof_widget.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add member comp_ext to struct snd_sof_widget, which will be used for
topology extended tokens parsing.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200904132744.1699575-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By representing the module clock as a DAPM widget, we ensure that the
clock is only enabled when the module is actually in use, without
additional code in runtime PM hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-10-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When attached to the regmap, the bus clock is automatically enabled as
needed to access device registers. This avoids needing code to manage it
separately in the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All other definitions are sorted from largest to smallest bit number.
This makes the AIF1CLK_CTRL mask constants consistent with them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Several fields have inconsistent indentation, presumably because the
patch "looked correct" due to the additional "+" character at the
beginning of the line.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though they are for the left channel mixer, they are documented as
"MXR_SRC". This matches the naming scheme used for the main DAC. The "R"
is part of the abbreviation for "mixer", not a reference to the channel.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is for the digital part of the codec only. The analog part,
including the microphone inputs, is managed by a separate driver. These
widgets look like they were copied from sun4i-codec. Since they do not
perform any function in this driver, remove them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add .prepare and .hw_free callback to dailink.
The companion patch for this patch is the removal of stream operations
in the .prepare and .hw_free callbacks at the DAI level in
drivers/soundwire/intel.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200904182854.3944-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add trigger functionality to dailink, so far only .startup() and
.shutdown() were implemented at the machine driver level.
The companion patch for this patch is the removal of the trigger
callback at the DAI level in drivers/soundwire/intel.c
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200904182854.3944-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core power up involves 2 steps: The first step tries to
power up the core by setting the ADSPCS.SPA bit for the host-managed
cores. The second step involves sending the IPC to power up other
cores that are not host managed. The enabled_cores_mask should
be updated only when both these steps are successful. If the
IPC to the DSP fails, the host-managed core that was powered in
step 1 should be powered off before returning the error.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SOF supports running pipelines on secondary DSP cores in a
limited way. This patch represents the next step in SOF multi-core DSP
support, it adds checks for core ID to individual topology components.
It takes care to power up all the requested cores. More advanced DSP
core power management should be added in the future.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902140756.1427005-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
