This patch introduces a kmem cache for dlm_msg handles which are used
always if dlm sends a message out. Even if their are covered by midcomms
layer or not.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a kmem cache for writequeue entry. A writequeue
entry get quite a lot allocated if dlm transmit messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will introduce a kmem cache for allocating message handles
which are needed for midcomms layer to take track of lowcomms messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleanups the code for allocating a new buffer in the dlm
writequeue mechanism. There was a possible tuneup to allow scheduling
while a new writequeue entry needs to be allocated because either no
sending page is available or are full. To avoid multiple concurrent
users checking at the same time if an entry is available or full
alloc_wq was introduce that those are waiting if there is currently a
new writequeue entry in process to be queued so possible further users
will check on the new allocated writequeue entry if it's full.
To simplify the code we just remove this mutex and switch that the
already introduced spin lock will be held during writequeue check,
allocation and queueing. So other users can never check on available
writequeues while there is a new one in process but not queued yet.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use an event based waitqueue to wait for a possible clash
with the ls_remove_name field of dlm_ls instead of doing busy waiting.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently we don't care if the DLM application stack is filling buffers
(not committed yet) while we transmit some already committed buffers.
By checking on active writequeue users before dequeue a writequeue entry
we know there is coming more data and do nothing. We wait until the send
worker will be triggered again if the writequeue entry users hit zero.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use list_empty(&ls->ls_cb_delay) to check for last list
iteration. In case of a multiply count of MAX_CB_QUEUE and the list is
empty we do a extra goto more which we can avoid by checking on
list_empty().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will surround the AF_INET6 case in sk_error_report() of dlm
with a #if IS_ENABLED(CONFIG_IPV6). The field sk->sk_v6_daddr is not
defined when CONFIG_IPV6 is disabled. If CONFIG_IPV6 is disabled, the
socket creation with AF_INET6 should already fail because a runtime
check if AF_INET6 is registered. However if there is the possibility
that AF_INET6 is set as sk_family the sk_error_report() callback will
print then an invalid family type error.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 4c3d90570b ("fs: dlm: don't call kernel_getpeername() in error_report()")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will replace the use of socket sk_callback_lock lock and uses
socket lock instead. Some users like sunrpc, see commit ea9afca88b
("SUNRPC: Replace use of socket sk_callback_lock with sock_lock") moving
from sk_callback_lock to sock_lock which seems to be held when the socket
callbacks are called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In some cases kernel_getpeername() will held the socket lock which is
already held when the socket layer calls error_report() callback. Since
commit 9dfc685e02 ("inet: remove races in inet{6}_getname()") this
problem becomes more likely because the socket lock will be held always.
You will see something like:
bob9-u5 login: [ 562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0
[ 562.318562] lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7
[ 562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ #135
[ 562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
[ 562.321277] Call Trace:
[ 562.321529] <IRQ>
[ 562.321734] dump_stack_lvl+0x33/0x42
[ 562.322282] do_raw_spin_lock+0x8b/0xc0
[ 562.322674] lock_sock_nested+0x1e/0x50
[ 562.323057] inet_getname+0x39/0x110
[ 562.323425] ? sock_def_readable+0x80/0x80
[ 562.323838] lowcomms_error_report+0x63/0x260 [dlm]
[ 562.324338] ? wait_for_completion_interruptible_timeout+0xd2/0x120
[ 562.324949] ? lock_timer_base+0x67/0x80
[ 562.325330] ? do_raw_spin_unlock+0x49/0xc0
[ 562.325735] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 562.326218] ? del_timer+0x54/0x80
[ 562.326549] sk_error_report+0x12/0x70
[ 562.326919] tcp_validate_incoming+0x3c8/0x530
[ 562.327347] ? kvm_clock_read+0x14/0x30
[ 562.327718] ? ktime_get+0x3b/0xa0
[ 562.328055] tcp_rcv_established+0x121/0x660
[ 562.328466] tcp_v4_do_rcv+0x132/0x260
[ 562.328835] tcp_v4_rcv+0xcea/0xe20
[ 562.329173] ip_protocol_deliver_rcu+0x35/0x1f0
[ 562.329615] ip_local_deliver_finish+0x54/0x60
[ 562.330050] ip_local_deliver+0xf7/0x110
[ 562.330431] ? inet_rtm_getroute+0x211/0x840
[ 562.330848] ? ip_protocol_deliver_rcu+0x1f0/0x1f0
[ 562.331310] ip_rcv+0xe1/0xf0
[ 562.331603] ? ip_local_deliver+0x110/0x110
[ 562.332011] __netif_receive_skb_core+0x46a/0x1040
[ 562.332476] ? inet_gro_receive+0x263/0x2e0
[ 562.332885] __netif_receive_skb_list_core+0x13b/0x2c0
[ 562.333383] netif_receive_skb_list_internal+0x1c8/0x2f0
[ 562.333896] ? update_load_avg+0x7e/0x5e0
[ 562.334285] gro_normal_list.part.149+0x19/0x40
[ 562.334722] napi_complete_done+0x67/0x160
[ 562.335134] virtnet_poll+0x2ad/0x408 [virtio_net]
[ 562.335644] __napi_poll+0x28/0x140
[ 562.336012] net_rx_action+0x23d/0x300
[ 562.336414] __do_softirq+0xf2/0x2ea
[ 562.336803] irq_exit_rcu+0xc1/0xf0
[ 562.337173] common_interrupt+0xb9/0xd0
It is and was always forbidden to call kernel_getpeername() in context
of error_report(). To get rid of the problem we access the destination
address for the peer over the socket structure. While on it we fix to
print out the destination port of the inet socket.
Fixes: 1a31833d08 ("DLM: Replace nodeid_to_addr with kernel_getpeername")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes an potential overflow in sscanf and the maximum
declared string parsing length which seems to be excluding the null
termination symbol. This patch will just add one byte to be prepared on
a string with length of DLM_RESNAME_MAXLEN including the null
termination symbol.
Fixes: 5054e79de9 ("fs: dlm: add lkb debugfs functionality")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a list_first_entry() call which is already done by
the previous con_next_wq() call.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to put a lkb to the waiters state. It can
be useful to combine this feature with the "rawmsg" debugfs
functionality. It will bring the DLM lkb into a state that a message
will be parsed by the kernel.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add an lkb during runtime. This is a
highly debugging feature only, wrong input can crash the kernel. It is a
early state feature as well. The goal is to provide a user interface for
manipulate dlm state and combine it with the rawmsg feature. It is
debugfs functionality, we don't care about UAPI breakage. Even it's
possible to add lkb's/rsb's which could never be exists in such wat by
using normal DLM operation. The user of this interface always need to
think before using this feature, not every crash which happens can really
occur during normal dlm operation.
Future there should be more functionality to add a more realistic lkb
which reflects normal DLM state inside the kernel. For now this is
enough.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to add a lkb with a specific id range.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a dlm functionality to send a raw dlm message to a
specific cluster node. This raw message can be build by user space and
send out by writing the message to "rawmsg" dlm debugfs file.
There is a in progress scapy dlm module which provides a easy build of
DLM messages in user space. For example:
DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0xe4f48a18, ...)
The goal is to provide an easy reproducable state to crash DLM or to
fuzz the DLM kernel stack if there are possible ways to crash it.
Note: that if the sequence number is zero and dlm version is not set to
3.1 the kernel will automatic will set a right sequence number, otherwise
DLM stack testing is not possible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the dlm_lowcomms_new_msg() function pointer private data
from "struct mhandle *" to "void *" to provide different structures than
just "struct mhandle".
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ls_count busy wait to use atomic counter values
and wait_event() to wait until ls_count reach zero. It will slightly
reduce the number of holding lslist_lock. At remove lockspace we need to
retry the wait because it a lockspace get could interefere between
wait_event() and holding the lock which deletes the lockspace list entry.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the requestqueue busy waiting algorithm to use
atomic counter values and wait_event() to wait until the requestqueue is
empty. It will slightly reduce the number of holding ls_requestqueue_mutex
mutex.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds tracepoints for dlm socket receive and send
functionality. We can use it to track how much data was send or received
to or from a specific nodeid.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds initial support for dlm tracepoints. It will introduce
tracepoints to dlm main functionality dlm_lock()/dlm_unlock() and their
complete ast() callback or blocking bast() callback.
The lock/unlock functionality has a start and end tracepoint, this is
because there exists a race in case if would have a tracepoint at the
end position only the complete/blocking callbacks could occur before. To
work with eBPF tracing and using their lookup hash functionality there
could be problems that an entry was not inserted yet. However use the
start functionality for hash insert and check again in end functionality
if there was an dlm internal error so there is no ast callback. In further
it might also that locks with local masters will occur those callbacks
immediately so we must have such functionality.
I did not make everything accessible yet, although it seems eBPF can be
used to access a lot of internal datastructures if it's aware of the
struct definitions of the running kernel instance. We still can change
it, if you do eBPF experiments e.g. time measurements between lock and
callback functionality you can simple use the local lkb_id field as hash
value in combination with the lockspace id if you have multiple
lockspaces. Otherwise you can simple use trace-cmd for some functionality,
e.g. `trace-cmd record -e dlm` and `trace-cmd report` afterwards.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes dlm_callback_resume info printout less noisy by
accumulate all callback queues into one printout not in 25 times steps.
It seems this printout became lately quite noisy in relationship with
gfs2.
Before:
[241767.849302] dlm: bin: dlm_callback_resume 25
[241767.854846] dlm: bin: dlm_callback_resume 25
[241767.860373] dlm: bin: dlm_callback_resume 25
...
[241767.865920] dlm: bin: dlm_callback_resume 25
[241767.871352] dlm: bin: dlm_callback_resume 25
[241767.876733] dlm: bin: dlm_callback_resume 25
After the patch:
[ 385.485728] dlm: gfs2: dlm_callback_resume 175
if zero it will not be printed out.
Reported-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to evaluate the dlm_recovery_stopped() in the
condition of the if branch instead fetch it before evaluating the
condition. As this is an atomic test-set operation it should be
evaluated in the condition itself.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change to use dlm_recovery_stopped() which is the dlm way
to check if the LSFL_RECOVER_STOP flag in ls_flags by using the helper.
It is an atomic operation but the check is still as before to fetch the
value if ls_recover_lock is held. There might be more further
investigations if the value can be changed afterwards and if it has any
side effects.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves version conversion to little endian from a runtime
variable to compile time constant.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit 764ff4011424 ("fs: dlm: auto load sctp module") we try
load the sctp module before we try to create a sctp kernel socket. That
a socket creation fails now has more likely other reasons. This patch
removes the part of error to load the sctp module and instead printout
the error code.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch improves the debug output for midcomms layer by also printing
out the nodeid where users counter belongs to.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a typo from lockspace to lockspace.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an obsolete define for some length for an temporary
buffer which is not being used anymore. The use of this define is not
necessary anymore since commit 4798cbbfbd ("fs: dlm: rework receive
handling").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When dlm_release_lockspace does active shutdown on connections to
other nodes, the active shutdown will wait for any exisitng passive
shutdowns to be resolved. But, the sequence of operations during
dlm_release_lockspace can prevent the normal resolution of passive
shutdowns (processed normally by way of lockspace recovery.)
This disruption of passive shutdown handling can cause the active
shutdown to wait for a full timeout period, delaying the completion
of dlm_release_lockspace.
To fix this, make dlm_release_lockspace resolve existing passive
shutdowns (by calling dlm_clear_members earlier), before it does
active shutdowns. The active shutdowns will not find any passive
shutdowns to wait for, and will not be delayed.
Reported-by: Chris Mackowski <cmackows@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will return -EINTR instead of 1 if recovery is stopped. In
case of ping_members() the return value will be checked if the error is
-EINTR for signaling another recovery was triggered and the whole
recovery process will come to a clean end to process the next one.
Returning 1 will abort the recovery process and can leave the recovery
in a broken state.
It was reported with the following kernel log message attached and a gfs2
mount stopped working:
"dlm: bobvirt1: dlm_recover_members error 1"
whereas 1 was returned because of a conversion of "dlm_recovery_stopped()"
to an errno was missing which this patch will introduce. While on it all
other possible missing errno conversions at other places were added as
they are done as in other places.
It might be worth to check the error case at this recovery level,
because some of the functionality also returns -ENOBUFS and check why
recovery ends in a broken state. However this will fix the issue if
another recovery was triggered at some points of recovery handling.
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes that we don't ack each message. Lowcomms will take
care about to send an ack back after a bulk of messages was processed.
Currently it's only when the whole receive buffer was processed, there
might better positions to send an ack back but only the lowcomms
implementation know when there are more data to receive. This patch has
also disadvantages that we might retransmit more on errors, however this
is a very rare case.
Tested with make_panic on gfs2 with three nodes by running:
trace-cmd record -p function -l 'dlm_send_ack' sleep 100
and
trace-cmd report | wc -l
Before patch:
- 20548
- 21376
- 21398
After patch:
- 18338
- 20679
- 19949
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the kernel_recvmsg() loop call into the
receive_from_sock() function instead of doing the loop outside the
function and abort the loop over it's return value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will add a mutex that a connection can allocate a writequeue
entry buffer only at a sleepable context at one time. If multiple caller
waits at the writequeue spinlock and the spinlock gets release it could
be that multiple new writequeue page buffers were allocated instead of
allocate one writequeue page buffer and other waiters will use remaining
buffer of it. It will only be the case for sleepable context which is
the common case. In non-sleepable contexts like retransmission we just
don't care about such behaviour.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a generic connect function for TCP and SCTP. If the
connect functionality differs from each other additional callbacks in
dlm_proto_ops were added. The sockopts callback handling will guarantee
that sockets created by connect() will use the same options as sockets
created by accept().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a "for now" better handling of missing SCTP support in
the kernel and try to load the sctp module if SCTP is set.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch combines each transport layer listen functionality into one
listen function. Per transport layer differences are provided by
additional callbacks in dlm_proto_ops.
This patch drops silently sock_set_keepalive() for listen tcp sockets
only. This socket option is not set at connecting sockets, I also don't
see the sense of set keepalive for sockets which are created by accept()
only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the per transport socket callbacks to a static const
array. We can support only one transport socket for the init namespace
which will be determinted by reading the dlm config at lowcomms_start().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce a function to determine if something is ready to
being send in the writequeue. It's not just that the writequeue is not
empty additional the first entry need to have a valid length field.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The _send_rcom() can be removed and we call directly dlm_rcom_out().
As we doing that we removing the struct dlm_ls parameter which isn't
used.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If send_to_sock() sets CF_APP_LIMITED limited bit and it has not been
cleared by a waiting lowcomms_write_space() yet and a close_connection()
apprears we should clear the CF_APP_LIMITED bit again because the
connection starts from a new state again at reconnect.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a small typo in a unused struct field. It should named
be t_pad instead of o_pad. Came over this as I updated wireshark
dissector.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use READ_ONCE to signal the compiler to read this
variable only one time. If we don't do that it could be that the
compiler read this value more than one time, because some optimizations,
from the configure data which might can be changed during this time.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of dereference "con->sock" we can get the socket structure over
"sk->sk_socket" as well. This patch will switch to this behaviour.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will evaluate the message length if a dlm opts header can fit
in before accessing it if a node lookup fails. The invalid sequence
error means that the version detection failed and an unexpected message
arrived. For debugging such situation the type of arrived message is
important to know.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a race between mhandle deletion in case of receiving an
acknowledge and flush of all pending mhandle in cases of an timeout or
resetting node states.
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DEFAULT_BUFFER_SIZE to DLM_MAX_SOCKET_BUFSIZE and
LOWCOMMS_MAX_TX_BUFFER_LEN to DLM_MAX_APP_BUFSIZE as they are proper
names to define what's behind those values. The DLM_MAX_SOCKET_BUFSIZE
defines the maximum size of buffer which can be handled on socket layer,
the DLM_MAX_APP_BUFSIZE defines the maximum size of buffer which can be
handled by the DLM application layer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the dlm protocol values are that TCP is 0 and everything else
is SCTP. This makes it difficult to introduce possible other transport
layers. The only one user space tool dlm_controld, which I am aware of,
handles the protocol value 1 for SCTP. We change it now to handle SCTP
as 1, this will break user space API but it will fix it so we can add
possible other transport layers.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch checks if possible allowing new connections is allowed before
queueing the listen socket to accept new connections.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The proper way to allocate ordered workqueues is to use
alloc_ordered_workqueue() function. The current way implies an ordered
workqueue which is also required by dlm.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the error path handling in lowcomms_start(). We need to
cleanup some static allocated data structure and cleanup possible
workqueue if these have started.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are spelling mistake in log messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is an error return path that is not kfree'ing mh after
it has been successfully allocates. Fix this by moving the
call to create_rcom to after the check on rc_in->rc_id check
to avoid this.
Thanks to Alexander Ahring Oder Aring for suggesting the
correct way to fix this.
Addresses-Coverity: ("Resource leak")
Fixes: a070a91cf1 ("fs: dlm: add more midcomms hooks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will clean a dirty page buffer if a reconnect occurs. If a page
buffer was half transmitted we cannot start inside the middle of a dlm
message if a node connects again. I observed invalid length receptions
errors and was guessing that this behaviour occurs, after this patch I
never saw an invalid message length again. This patch might drops more
messages for dlm version 3.1 but 3.1 can't deal with half messages as
well, for 3.2 it might trigger more re-transmissions but will not leave dlm
in a broken state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to debug midcomms per connection state
inside a comms directory which is similar like dlm configfs. Currently
there exists the possibility to read out two attributes which is the
send queue counter and the version of each midcomms node state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce to make a tcp lowcomms connection reliable even if
reconnects occurs. This is done by an application layer re-transmission
handling and sequence numbers in dlm protocols. There are three new dlm
commands:
DLM_OPTS:
This will encapsulate an existing dlm message (and rcom message if they
don't have an own application side re-transmission handling). As optional
handling additional tlv's (type length fields) can be appended. This can
be for example a sequence number field. However because in DLM_OPTS the
lockspace field is unused and a sequence number is a mandatory field it
isn't made as a tlv and we put the sequence number inside the lockspace
id. The possibility to add optional options are still there for future
purposes.
DLM_ACK:
Just a dlm header to acknowledge the receive of a DLM_OPTS message to
it's sender.
DLM_FIN:
This provides a 4 way handshake for connection termination inclusive
support for half-closed connections. It's provided on application layer
because SCTP doesn't support half-closed sockets, the shutdown() call
can interrupted by e.g. TCP resets itself and a hard logic to implement
it because the othercon paradigm in lowcomms. The 4-way termination
handshake also solve problems to synchronize peer EOF arrival and that
the cluster manager removes the peer in the node membership handling of
DLM. In some cases messages can be still transmitted in this time and we
need to wait for the node membership event.
To provide a reliable connection the node will retransmit all
unacknowledges message to it's peer on reconnect. The receiver will then
filtering out the next received message and drop all messages which are
duplicates.
As RCOM_STATUS and RCOM_NAMES messages are the first messages which are
exchanged and they have they own re-transmission handling, there exists
logic that these messages must be first. If these messages arrives we
store the dlm version field. This handling is on DLM 3.1 and after this
patch 3.2 the same. A backwards compatibility handling has been added
which seems to work on tests without tcpkill, however it's not recommended
to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long
term bugs in the DLM protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds union inside the lockspace id to handle it also for
another use case for a different dlm command.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves out some lowcomms hash functionality into lowcomms
header to provide them to other layers like midcomms as well.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a retransmit functionality for a lowcomms message
handle. It's just allocates a new buffer and transmit it again, no
special handling about prioritize it because keeping bytestream in order.
To avoid another connection look some refactor was done to make a new
buffer allocation with a preexisting connection pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes the void pointer handle for lowcomms functionality per
message and not per page allocation entry. A refcount handling for the
handle was added to keep the message alive until the user doesn't need
it anymore.
There exists now a per message callback which will be called when
allocating a new buffer. This callback will be guaranteed to be called
according the order of the sending buffer, which can be used that the
caller increments a sequence number for the dlm message handle.
For transition process we cast the dlm_mhandle to dlm_msg and vice versa
until the midcomms layer will implement a specific dlm_mhandle structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch prepares hooks to redirect to the midcomms layer which will
be used by the midcomms re-transmit handling.
There exists the new concept of stateless buffers allocation and
commits. This can be used to bypass the midcomms re-transmit handling. It
is used by RCOM_STATUS and RCOM_NAMES messages, because they have their
own ping-like re-transmit handling. As well these two messages will be
used to determine the DLM version per node, because these two messages
are per observation the first messages which are exchanged.
Cluster manager events for node membership are added to add support for
half-closed connections in cases that the peer connection get to
an end of file but DLM still holds membership of the node. In
this time DLM can still trigger new message which we should allow. After
the cluster manager node removal event occurs it safe to close the
connection.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch allows to use header_out() and header_in() outside of dlm
util functionality.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the EOF handling for TCP that if and EOF is received we
will close the socket next time the writequeue runs empty. This is a
half-closed socket functionality which doesn't exists in SCTP. The
midcomms layer will do a half closed socket functionality on DLM side to
solve this problem for the SCTP case. However there is still the last ack
flying around but other reset functionality will take care of it if it got
lost.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
These rx tx flags arguments are for signaling close_connection() from
which worker they are called. Obviously the receive worker cannot cancel
itself and vice versa for swork. For the othercon the receive worker
should only be used, however to avoid deadlocks we should pass the same
flags as the original close_connection() was called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will change the reconnect handling that if an error occurs
if a socket error callback is occurred. This will also handle reconnects
in a non blocking connecting case which is currently missing. If error
ECONNREFUSED is reported we delay the reconnect by one second.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is a is othercon flag which is never used, this patch will set it
and printout a warning if the othercon ever sends a dlm message which
should never be the case.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch holds the srcu connection read lock in cases where we lookup
the connections and accessing it. We don't hold the srcu lock in workers
function where the scheduled worker is part of the connection itself.
The connection should not be freed if any worker is scheduled or
pending.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch add ratelimit macro to dlm subsystem and will set the
connecting log message to ratelimit. In non blocking connecting cases it
will print out this message a lot.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ping_members() result that we always run
complete() for possible waiters. We handle the -EINTR error code as
successful. This error code is returned if the recovery is stopped which
is likely that a new recovery is triggered with a new members
configuration and ping_members() runs again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add the missing unlock before return from accept_from_sock()
in the error handling case.
Fixes: 6cde210a97 ("fs: dlm: add helper for init connection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the flushing of send work before shutdown. The function
cancel_work_sync() is not the right workqueue functionality to use here
as it would cancel the work if the work queues itself. In cases of
EAGAIN in send() for dlm message we need to be sure that everything is
send out before. The function flush_work() will ensure that every send
work is be done inclusive in EAGAIN cases.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unaligned memory access handling for receiving
midcomms messages. This handling will not fix the unaligned memory
access in general. All messages should be length aligned to 8 bytes,
there exists cases where this isn't the case. It's part of the sending
handling to not send such messages. As the sending handling itself, with
the internal allocator of page buffers, can occur in unaligned memory
access of dlm message fields we just ignore that problem for now as it
seems this code is used by architecture which can handle it.
This patch adds a comment to take care about that problem in a major
bump of dlm protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds an additional check for minimum dlm header size which is
an invalid dlm message and signals a broken stream. A msglen field cannot
be less than the dlm header size because the field is inclusive header
lengths.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleans up the current dlm sending allocator handling by using
some named macros, list functionality and removes some goto statements.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch uses GFP_ZERO for allocate a page for the internal dlm
sending buffer allocator instead of calling memset zero after every
allocation. An already allocated space will never be reused again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
While running tcpkill I experienced invalid header length values while
receiving to check that a node doesn't try to send a invalid dlm message
we also check on applications minimum allocation limit. Also use
DEFAULT_BUFFER_SIZE as maximum allocation limit. The define
LOWCOMMS_MAX_TX_BUFFER_LEN is to calculate maximum buffer limits on
application layer, future midcomms layer will subtract their needs from
this define.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds checks for dlm config attributes regarding to protocol
parameters as it makes only sense to change them when dlm is not running.
It also adds a check for valid protocol specifiers and return invalid
argument if they are not supported.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This allows to return individual errno values for the config attribute
check callback instead of returning invalid argument only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the lockdep subclass for the othercon socket mutex. In
various places the connection socket mutex is held while locking the
othercon socket mutex. This patch will remove lockdep warnings when such
case occurs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the CF_CONNECTED bit when dlm accepts a connection from
another node. If we don't set this bit, next time if the connection
socket gets writable it will assume an event that the connection is
successfully connected. However that is only the case when the
connection did a connect.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes an deadlock issue when dlm_lowcomms_close() is called.
When dlm_lowcomms_close() is called the clusters_root.subsys.su_mutex is
held to remove configfs items. At this time we flushing (e.g.
cancel_work_sync()) the workers of send and recv workqueue. Due the fact
that we accessing configfs items (mark values), these workers will lock
clusters_root.subsys.su_mutex as well which are already hold by
dlm_lowcomms_close() and ends in a deadlock situation.
[67170.703046] ======================================================
[67170.703965] WARNING: possible circular locking dependency detected
[67170.704758] 5.11.0-rc4+ #22 Tainted: G W
[67170.705433] ------------------------------------------------------
[67170.706228] dlm_controld/280 is trying to acquire lock:
[67170.706915] ffff9f2f475a6948 ((wq_completion)dlm_recv){+.+.}-{0:0}, at: __flush_work+0x203/0x4c0
[67170.708026]
but task is already holding lock:
[67170.708758] ffffffffa132f878 (&clusters_root.subsys.su_mutex){+.+.}-{3:3}, at: configfs_rmdir+0x29b/0x310
[67170.710016]
which lock already depends on the new lock.
The new behaviour adds the mark value to the node address configuration
which doesn't require to held the clusters_root.subsys.su_mutex by
accessing mark values in a separate datastructure. However the mark
values can be set now only after a node address was set which is the
case when the user is using dlm_controld.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following message which randomly pops up during
glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch checks if we add twice the same address to a per node address
array. This should never be the case and we report -EEXIST to the user
space.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch just constify some function parameter which should be have a
read access only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use the runtime array size dlm_local_count variable
to check the actual size of the dlm_local_addr array. There exists
currently a cleanup bug, because the tcp_listen_for_all() functionality
might check on a dangled pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces a own connection structure for the listen socket
handling instead of handling the listen socket as normal connection
structure in the connection hash. We can remove some nodeid equals zero
validation checks, because this nodeid should not exists anymore inside
the node hash. This patch also removes the sock mutex in
accept_from_sock() function because this function can't occur in another
parallel context if it's scheduled on only one workqueue.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch refactors sctp_bind_addrs() to work with a socket parameter
instead of a connection parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch move the assignment for the shutdown action callback to the
node creation functionality.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the assignment for the connect callback to the node
creation instead of assign some dummy functionality. The assignment
which connect functionality will be used will be detected according to
the configfs setting.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the connection structure initialization into an
own function. This avoids cases to update the othercon initialization.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The manpage of connect shows that in non blocked mode a writeability
indicates successful connection event. This patch is handling this event
inside the writeability callback. In case of SCTP we use blocking
connect functionality which indicates a successful connect when the
function returns with a successful return value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch ensures we also flush the othercon writequeue when a lowcomms
close occurs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds an error handling to the get buffer functionality if the
user is requesting a buffer length which is more than possible of
the internal buffer allocator. This should never happen because specific
handling decided by compile time, but will warn if somebody forget about
to handle this limitation right.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will set the maximum transmit buffer size for rcom messages
with "names" to 4096 bytes. It's a leftover change of
commit 4798cbbfbd ("fs: dlm: rework receive handling"). Fact is that we
cannot allocate a contiguous transmit buffer length above of 4096 bytes.
It seems at some places the upper layer protocol will calculate according
to dlm_config.ci_buffer_size the possible payload of a dlm recovery
message. As compiler setting we will use now the maximum possible
message which dlm can send out. Commit 4e192ee68e ("fs: dlm: disallow
buffer size below default") disallow a buffer setting smaller than the
4096 bytes and above 4096 bytes is definitely wrong because we will then
write out of buffer space as we cannot allocate a contiguous buffer above
4096 bytes. The ci_buffer_size is still there to define the possible
maximum receive buffer size of a recvmsg() which should be at least the
maximum possible dlm message size.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use call_srcu() instead of call_rcu() because the
related datastructure resource are handled under srcu context. I assume
the current code is fine anyway since free_conn() must be called when
the related resource are not in use otherwise. However it will correct
the overall handling in a srcu context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
