Refactor all the open-coded validation of file block ranges into a
single helper, and teach the bmap scrubber to check the ranges.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The inode extent truncate path unmaps extents from the inode block
mapping, finishes deferred ops to free the associated extents and
then explicitly rolls the transaction before processing the next
extent. The latter extent roll is spurious as xfs_defer_finish()
always returns a clean transaction and automatically relogs inodes
attached to the transaction (with lock_flags == 0). This can
unnecessarily increase the number of log ticket regrants that occur
during a long running truncate operation. Remove the explicit
transaction roll.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While running generic/042 with -drtinherit=1 set in MKFS_OPTIONS, I
observed that the kernel will gladly set the realtime flag on any file
created on the loopback filesystem even though that filesystem doesn't
actually have a realtime device attached. This leads to verifier
failures and doesn't make any sense, so be smarter about this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the code that propagates di_flags and di_flags2 from a parent to a
new child into separate functions. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit
counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the
32-bit unix time epoch). This enables us to handle dates up to 2486,
which solves the y2038 problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Move the buffer retry state machine logic to xfs_buf.c and call it once
from xfs_ioend instead of duplicating it three times for the three kinds
of buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
With the recent rework of the inode cluster flushing, we no longer
ever wait on the the inode flush "lock". It was never a lock in the
first place, just a completion to allow callers to wait for inode IO
to complete. We now never wait for flush completion as all inode
flushing is non-blocking. Hence we can get rid of all the iflock
infrastructure and instead just set and check a state flag.
Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the
xfs_iflock_nowait() test-and-set operations on that flag, and
replace all the xfs_ifunlock() calls to clear operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Delete repeated words in fs/xfs/.
{we, that, the, a, to, fork}
Change "it it" to "it is" in one location.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
To: linux-fsdevel@vger.kernel.org
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In the course of some operations, we look up the perag from
the mount multiple times to get or change perag information.
These are often very short pieces of code, so while the
lookup cost is generally low, the cost of the lookup is far
higher than the cost of the operation we are doing on the
perag.
Since we changed buffers to hold references to the perag
they are cached in, many modification contexts already hold
active references to the perag that are held across these
operations. This is especially true for any operation that
is serialised by an allocation group header buffer.
In these cases, we can just use the buffer's reference to
the perag to avoid needing to do lookups to access the
perag. This means that many operations don't need to do
perag lookups at all to access the perag because they've
already looked up objects that own persistent references
and hence can use that reference instead.
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This debug code is called on every xfs_iflush() call, which then
checks every inode in the buffer for non-zero unlinked list field.
Hence it checks every inode in the cluster buffer every time a
single inode on that cluster it flushed. This is resulting in:
- 38.91% 5.33% [kernel] [k] xfs_iflush
- 17.70% xfs_iflush
- 9.93% xfs_inobp_check
4.36% xfs_buf_offset
10% of the CPU time spent flushing inodes is repeatedly checking
unlinked fields in the buffer. We don't need to do this.
The other place we call xfs_inobp_check() is
xfs_iunlink_update_dinode(), and this is after we've done this
assert for the agino we are about to write into that inode:
ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));
which means we've already checked that the agino we are about to
write is not 0 on debug kernels. The inode buffer verifiers do
everything else we need, so let's just remove this debug code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.
We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.
We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....
We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
with xfs_iflush() gone, we can rename xfs_iflush_int() back to
xfs_iflush(). Also move it up above xfs_iflush_cluster() so we don't
need the forward definition any more.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.
This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.
This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.
Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Rather than attach inodes to the cluster buffer just when we are
doing IO, attach the inodes to the cluster buffer when they are
dirtied. The means the buffer always carries a list of dirty inodes
that reference it, and we can use that list to make more fundamental
changes to inode writeback that aren't otherwise possible.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Once we have inodes pinning the cluster buffer and attached whenever
they are dirty, we no longer have a guarantee that the items are
flush locked when we lock the cluster buffer. Hence we cannot just
walk the buffer log item list and modify the attached inodes.
If the inode is not flush locked, we have to ILOCK it first and then
flush lock it to do all the prerequisite checks needed to avoid
races with other code. This is already handled by
xfs_ifree_get_one_inode(), so rework the inode iteration loop and
function to update all inodes in cache whether they are attached to
the buffer or not.
Note: we also remove the copying of the log item lsn to the
ili_flush_lsn as xfs_iflush_done() now uses the XFS_ISTALE flag to
trigger aborts and so flush lsn matching is not needed in IO
completion for processing freed inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
They are not used anymore, so remove them from the log item and the
buffer iodone attachment interfaces.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Having different io completion callbacks for different inode states
makes things complex. We can detect if the inode is stale via the
XFS_ISTALE flag in IO completion, so we don't need a special
callback just for this.
This means inodes only have a single iodone callback, and inode IO
completion is entirely buffer centric at this point. Hence we no
longer need to use a log item callback at all as we can just call
xfs_iflush_done() directly from the buffer completions and walk the
buffer log item list to complete the all inodes under IO.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.
While this is largely a refactor of existing functionality, we
broaden the scope of the flag to beyond where inodes are explicitly
attached because future changes need to know what type of log items
are attached to the buffer. Adding this buffer flag may invoke the
inode iodone callback in cases where it wouldn't have been
previously, but this is not a functional change because the callback
is identical to the normal buffer write iodone callback when inodes
are not attached.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode log item is kind of special in that it can be aggregating
new changes in memory at the same time time existing changes are
being written back to disk. This means there are fields in the log
item that are accessed concurrently from contexts that don't share
any locking at all.
e.g. updating ili_last_fields occurs at flush time under the
ILOCK_EXCL and flush lock at flush time, under the flush lock at IO
completion time, and is read under the ILOCK_EXCL when the inode is
logged. Hence there is no actual serialisation between reading the
field during logging of the inode in transactions vs clearing the
field in IO completion.
We currently get away with this by the fact that we are only
clearing fields in IO completion, and nothing bad happens if we
accidentally log more of the inode than we actually modify. Worst
case is we consume a tiny bit more memory and log bandwidth.
However, if we want to do more complex state manipulations on the
log item that requires updates at all three of these potential
locations, we need to have some mechanism of serialising those
operations. To do this, introduce a spinlock into the log item to
serialise internal state.
This could be done via the xfs_inode i_flags_lock, but this then
leads to potential lock inversion issues where inode flag updates
need to occur inside locks that best nest inside the inode log item
locks (e.g. marking inodes stale during inode cluster freeing).
Using a separate spinlock avoids these sorts of problems and
simplifies future code.
This does not touch the use of ili_fields in the item formatting
code - that is entirely protected by the ILOCK_EXCL at this point in
time, so it remains untouched.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This was used to track if the item had logged fields being flushed
to disk. We log everything in the inode these days, so this logic is
no longer needed. Remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In tracking down a problem in this patchset, I discovered we are
reclaiming dirty stale inodes. This wasn't discovered until inodes
were always attached to the cluster buffer and then the rcu callback
that freed inodes was assert failing because the inode still had an
active pointer to the cluster buffer after it had been reclaimed.
Debugging the issue indicated that this was a pre-existing issue
resulting from the way the inodes are handled in xfs_inactive_ifree.
When we free a cluster buffer from xfs_ifree_cluster, all the inodes
in cache are marked XFS_ISTALE. Those that are clean have nothing
else done to them and so eventually get cleaned up by background
reclaim. i.e. it is assumed we'll never dirty/relog an inode marked
XFS_ISTALE.
On journal commit dirty stale inodes as are handled by both
buffer and inode log items to run though xfs_istale_done() and
removed from the AIL (buffer log item commit) or the log item will
simply unpin it because the buffer log item will clean it. What happens
to any specific inode is entirely dependent on which log item wins
the commit race, but the result is the same - stale inodes are
clean, not attached to the cluster buffer, and not in the AIL. Hence
inode reclaim can just free these inodes without further care.
However, if the stale inode is relogged, it gets dirtied again and
relogged into the CIL. Most of the time this isn't an issue, because
relogging simply changes the inode's location in the current
checkpoint. Problems arise, however, when the CIL checkpoints
between two transactions in the xfs_inactive_ifree() deferops
processing. This results in the XFS_ISTALE inode being redirtied
and inserted into the CIL without any of the other stale cluster
buffer infrastructure being in place.
Hence on journal commit, it simply gets unpinned, so it remains
dirty in memory. Everything in inode writeback avoids XFS_ISTALE
inodes so it can't be written back, and it is not tracked in the AIL
so there's not even a trigger to attempt to clean the inode. Hence
the inode just sits dirty in memory until inode reclaim comes along,
sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming
of a dirty inode caused use after free, list corruptions and other
nasty issues later in this patchset.
Hence this patch addresses a violation of the "never log XFS_ISTALE
inodes" caused by the deferops processing rolling a transaction
and relogging a stale inode in xfs_inactive_free. It also adds a
bunch of asserts to catch this problem in debug kernels so that
we don't reintroduce this problem in future.
Reproducer for this issue was generic/558 on a v4 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the double-inode locking helpers to xfs_inode.c since they're not
specific to reflink.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
- Fix a resource leak on an error bailout.
-----BEGIN PGP SIGNATURE-----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=C0rZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
xfs_ifree_cluster() calls xfs_perag_get() at the beginning, but forgets to
call xfs_perag_put() in one failed path.
Add the missed function call to fix it.
Fixes: ce92464c18 ("xfs: make xfs_trans_get_buf return an error code")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifree only need to free inline data in the data fork, as we've
already taken care of the attr fork before (and in fact freed the
fork structure). Just open code the freeing of the inline data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The split between xfs_inode_verify_forks and the two helpers
implementing the actual functionality is a little strange. Reshuffle
it so that xfs_inode_verify_forks verifies if the data and attr forks
are actually in local format and only call the low-level helpers if
that is the case. Handle the actual error reporting in the low-level
handlers to streamline the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifork_ops add up to two indirect calls per inode read and flush,
despite just having a single instance in the kernel. In xfsprogs
phase6 in xfs_repair overrides the verify_dir method to deal with inodes
that do not have a valid parent, but that can be fixed pretty easily
by ensuring they always have a valid looking parent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and
fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The stale parameter was used to control the now unused shutdown
parameter of xfs_trans_ail_remove().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown check in xfs_iflush() duplicates checks down in the
buffer code. If the fs is shut down, xfs_trans_read_buf_map() always
returns an error and falls into the same error path. Remove the
unnecessary check along with the warning in xfs_imap_to_bp()
that generates excessive noise in the log if the fs is shut down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode flush code has several layers of error handling between
the inode and cluster flushing code. If the inode flush fails before
acquiring the backing buffer, the inode flush is aborted. If the
cluster flush fails, the current inode flush is aborted and the
cluster buffer is failed to handle the initial inode and any others
that might have been attached before the error.
Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the
error handling between the two can be condensed in the top-level
function. If we update xfs_iflush_int() to always fall through to
the log item update and attach the item completion handler to the
buffer, any errors that occur after the first call to
xfs_iflush_int() can be handled with a buffer I/O failure.
Lift the error handling from xfs_iflush_cluster() into xfs_iflush()
and consolidate with the existing error handling. This also replaces
the need to release the buffer because failing the buffer with
XBF_ASYNC drops the current reference.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We use the same buffer I/O failure code in a few different places.
It's not much code, but it's not necessarily self-explanatory.
Factor it into a helper and document it in one place.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Qian Cai reports seemingly random buffer read verifier errors during
filesystem writeback. This was isolated to a recent patch that
factored out some inode cluster freeing code and happened to cast an
unsigned inode number type to a signed value. If the inode number
value overflows, we can skip marking in-core inodes associated with
the underlying buffer stale at the time the physical inodes are
freed. If such an inode happens to be dirty, xfsaild will eventually
attempt to write it back over non-inode blocks. The invalidation of
the underlying inode buffer causes writeback to read the buffer from
disk. This fails the read verifier (preventing eventual corruption)
if the buffer no longer looks like an inode cluster. Analysis by
Dave Chinner.
Fix up the helper to use the proper type for inode number values.
Fixes: 5806165a66 ("xfs: factor inode lookup from xfs_ifree_cluster")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We know the version is 3 if on a v5 file system. For earlier file
systems formats we always upgrade the remaining v1 inodes to v2 and
thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode
helper to check if we deal with small or large dinodes, and thus
remove the need for the di_version field in struct icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
di_flags2 is initialized to zero for v4 and earlier file systems. This
means di_flags2 can only be non-zero for a v5 file systems, in which
case both the parent and child inodes can store the field. Remove the
extra di_version check, and also remove the rather pointless local
di_flags2 variable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run. This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking. Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the Linux inode i_uid/i_gid members everywhere and just convert
from/to the scalar value when reading or writing the on-disk inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of only synchronizing the uid/gid values in xfs_setup_inode,
ensure that they always match to prepare for removing the icdinode
fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert xfs_trans_get_buf() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
fs/xfs/xfs_inode.c: In function 'xfs_itruncate_extents_flags':
fs/xfs/xfs_inode.c:1523:8: warning: unused variable 'done' [-Wunused-variable]
commit 4bbb04abb4 ("xfs: truncate should remove
all blocks, not just to the end of the page cache")
left behind this, so remove it.
Fixes: 4bbb04abb4 ("xfs: truncate should remove all blocks, not just to the end of the page cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_itruncate_extents_flags() is supposed to unmap every block in a file
from EOF onwards. Oddly, it uses s_maxbytes as the upper limit to the
bunmapi range, even though s_maxbytes reflects the highest offset the
pagecache can support, not the highest offset that XFS supports.
The result of this confusion is that if you create a 20T file on a
64-bit machine, mount the filesystem on a 32-bit machine, and remove the
file, we leak everything above 16T. Fix this by capping the bunmapi
request at the maximum possible block offset, not s_maxbytes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When target_ip exists in xfs_rename(), the xfs_dir_replace() call may
need to hold the AGF lock to allocate more blocks, and then invoking
the xfs_droplink() call to hold AGI lock to drop target_ip onto the
unlinked list, so we get the lock order AGF->AGI. This would break the
ordering constraint on AGI and AGF locking - inode allocation locks
the AGI, then can allocate a new extent for new inodes, locking the
AGF after the AGI.
In this patch we check whether the replace operation need more
blocks firstly. If so, acquire the agi lock firstly to preserve
locking order(AGI/AGF). Actually, the locking order problem only
occurs when we are locking the AGI/AGF of the same AG. For multiple
AGs the AGI lock will be released after the transaction committed.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reword the comment]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_icdinode is purely an in-memory data structure, so don't use
a log on-disk structure for it. This simplifies the code a bit, and
also reduces our include hell slightly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a minor indenting problem in xfs_trans_ichgtime]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we log something to dmesg whenever we return -EFSCORRUPTED up
the call stack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The xfs_bumplink() call has set the inode log fieldmask XFS_ILOG_CORE,
so the next xfs_trans_log_inode() call is not necessary.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in applying extent size hints for always COW inodes,
as we would just have to COW any extra allocation beyond the data
actually written.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When performing rename operation with RENAME_WHITEOUT flag, we will
hold AGF lock to allocate or free extents in manipulating the dirents
firstly, and then doing the xfs_iunlink_remove() call last to hold
AGI lock to modify the tmpfile info, so we the lock order AGI->AGF.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI. Hence
the ordering that is imposed by other parts of the code is AGI before
AGF. So we get an ABBA deadlock between the AGI and AGF here.
Process A:
Call trace:
? __schedule+0x2bd/0x620
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
__down_common+0xef/0x125
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agf+0xa6/0x180 [xfs]
? schedule_timeout+0x17d/0x290
xfs_alloc_read_agf+0x52/0x1f0 [xfs]
xfs_alloc_fix_freelist+0x432/0x590 [xfs]
? down+0x3b/0x50
? xfs_buf_lock+0x34/0xf0 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
xfs_alloc_vextent+0x301/0x6c0 [xfs]
xfs_ialloc_ag_alloc+0x182/0x700 [xfs]
? _xfs_trans_bjoin+0x72/0xf0 [xfs]
xfs_dialloc+0x116/0x290 [xfs]
xfs_ialloc+0x6d/0x5e0 [xfs]
? xfs_log_reserve+0x165/0x280 [xfs]
xfs_dir_ialloc+0x8c/0x240 [xfs]
xfs_create+0x35a/0x610 [xfs]
xfs_generic_create+0x1f1/0x2f0 [xfs]
...
Process B:
Call trace:
? __schedule+0x2bd/0x620
? xfs_bmapi_allocate+0x245/0x380 [xfs]
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
? xfs_buf_find+0x1fd/0x6c0 [xfs]
__down_common+0xef/0x125
? xfs_buf_get_map+0x37/0x230 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agi+0xa8/0x160 [xfs]
xfs_iunlink_remove+0x6f/0x2a0 [xfs]
? current_time+0x46/0x80
? xfs_trans_ichgtime+0x39/0xb0 [xfs]
xfs_rename+0x57a/0xae0 [xfs]
xfs_vn_rename+0xe4/0x150 [xfs]
...
In this patch we move the xfs_iunlink_remove() call to
before acquiring the AGF lock to preserve correct AGI/AGF locking
order.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cast is not type safe, and we can just dereference the first
member instead to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Finish converting all the old inode_cluster_size >> inopblog users to
inodes_per_cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Separate the inode geometry information into a distinct structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are several functions which have no opportunity to return
an error, and don't contain any ASSERTs which could be argued
to be better constructed as error cases. So, make them voids
to simplify the callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If xfs_iflush_cluster() fails due to corruption, the error path
issues a shutdown and simulates an I/O completion to release the
buffer. This code has a couple small problems. First, the shutdown
sequence can issue a synchronous log force, which is unsafe to do
with buffer locks held. Second, the simulated I/O completion does not
guarantee the buffer is async and thus is unlocked and released.
For example, if the last operation on the buffer was a read off disk
prior to the corruption event, XBF_ASYNC is not set and the buffer
is left locked and held upon return. This results in a memory leak
as shown by the following message on module unload:
BUG xfs_buf (...): Objects remaining in xfs_buf on __kmem_cache_shutdown()
Fix both of these problems by setting XBF_ASYNC on the buffer prior
to the simulated I/O error and performing the shutdown immediately
after ioend processing when the buffer has been released.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When XFS creates an O_TMPFILE file, the inode is created with nlink = 1,
put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile.
If we crash before anything logs the inode (it's dirty incore but the
vfs doesn't tell us it's dirty so we never log that change), the iunlink
processing part of recovery will then explode with a pile of:
XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file:
fs/xfs/xfs_log_recover.c, line: 5072
Worse yet, since nlink is nonzero, the inodes also don't get cleaned up
and they just leak until the next xfs_repair run.
Therefore, change xfs_iunlink to require that inodes being put on the
unlinked list have nlink == 0, change the tmpfile callers to instantiate
nodes that way, and set the nlink to 1 just prior to calling d_tmpfile.
Fix the comment for xfs_iunlink while we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename this flag variable to imply more strongly that it's related to
the free inode btree (finobt) operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use a rhashtable to cache the unlinked list incore. This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.
The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records. This makes finding the
inode X that points to a inode Y very quick. If our cache fails to find
anything we can always fall back on the old method.
FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list. I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists. With the
ptach, I see:
+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s
real 0m12.192s
user 0m0.064s
sys 0m11.619s
+ cd /
+ umount /mnt
real 0m0.050s
user 0m0.004s
sys 0m0.030s
And without the patch:
+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s
real 12m38.853s
user 0m0.084s
sys 12m34.470s
+ cd /
+ umount /mnt
real 0m0.086s
user 0m0.000s
sys 0m0.060s
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add tracepoints so we can associate high level operations with low level
updates. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_iunlink_remove we have two identical calls to
xfs_iunlink_update_inode, so move it out of the if statement to simplify
the code some more.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's a loop that searches an unlinked bucket list to find the inode
that points to a given inode. Hoist this into a separate function;
later we'll use our iunlink backref cache to bypass the slow list
operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Hoist the functions that update an inode's unlinked pointer updates into
a helper. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Strengthen our checking of the AGI unlinked pointers when we start to
use them for updating the metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Split the AGI unlinked bucket updates into a separate function. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix some indentation issues with the iunlink functions and reorganize
the tops of the functions to be identical. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add new helpers to convert units of fs blocks into inodes, and AG blocks
into AG inodes, respectively. Convert all the open-coded conversions
and XFS_OFFBNO_TO_AGINO(, , 0) calls to use them, as appropriate. The
OFFBNO_TO_AGINO macro is retained for xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There is a statement that has an unwanted space in the indentation.
Remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that deferred operations are completely managed via
transactions, it's no longer necessary to cancel the dfops in error
paths that already cancel the associated transaction. There are a
few such calls lingering throughout the codebase.
Remove all remaining unnecessary calls to xfs_defer_cancel(). This
leaves xfs_defer_cancel() calls in two places. The first is the call
in the transaction cancel path itself, which facilitates this patch.
The second is made via the xfs_defer_finish() error path to provide
consistent error semantics with transaction commit. For example,
xfs_trans_commit() expects an xfs_defer_finish() failure to clean up
the dfops structure before it returns.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The current semantics of xfs_defer_finish() require the caller to
call xfs_defer_cancel() on error. This is slightly inconsistent with
transaction commit error handling where a failed commit cleans up
the transaction before returning.
More significantly, the only requirement for exposure of
->dop_pending outside of xfs_defer_finish() is so that
xfs_defer_cancel() can drain it on error. Since the only recourse of
xfs_defer_finish() errors is cancellation, mirror the transaction
logic and cancel remaining dfops before returning from
xfs_defer_finish() with an error.
Beside simplifying xfs_defer_finish() semantics, this ensures that
xfs_defer_finish() always returns with an empty ->dop_pending and
thus facilitates removal of the list from xfs_defer_ops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have a few places that already check if an inode has actual data in
the COW fork to avoid work on reflink inodes that do not actually have
outstanding COW blocks. There are a few more places that can avoid
working if doing the same check, so add a documented helper for this
condition and use it in all places where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The field is only used for asserts, and to track if we really need to do
realloc when growing the inode fork data. But the krealloc function
already performs this check internally, so there is no need to keep track
of the real allocation size.
This will free space in the inode fork for keeping a sequence counter of
changes to the extent list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Every caller of xfs_defer_finish() now passes the transaction and
its associated ->t_dfops. The xfs_defer_ops parameter is therefore
no longer necessary and can be removed.
Since most xfs_defer_finish() callers also have to consider
xfs_defer_cancel() on error, update the latter to also receive the
transaction for consistency. The log recovery code contains an
outlier case that cancels a dfops directly without an available
transaction. Retain an internal wrapper to support this outlier case
for the time being.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_itruncate_extents[_flags]() uses a local dfops with a
transaction provided by the caller. It uses hacky ->t_dfops
replacement logic to avoid stomping over an already populated
->t_dfops.
The latter never occurs for current callers and the logic itself is
not really appropriate. Clean this up by updating all callers to
initialize a dfops and to use that down in xfs_itruncate_extents().
This more closely resembles the upcoming logic where dfops will be
embedded within the transaction. We can also replace the
xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an
assert. Both dfops and firstblock should be in a valid state
after xfs_defer_finish() and the inode joined to the dfops is fixed
throughout the loop.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but one caller of xfs_defer_init() passes in the ->t_firstblock
of the associated transaction. The one outlier is
xlog_recover_process_intents(), which simply passes a dummy value
because a valid pointer is required. This firstblock variable can
simply be removed.
At this point we could remove the xfs_defer_init() firstblock
parameter and initialize ->t_firstblock directly. Even that is not
necessary, however, because ->t_firstblock is automatically
reinitialized in the new transaction on a transaction roll. Since
xfs_defer_init() should never occur more than once on a particular
transaction (since the corresponding finish will roll it), replace
the reinit from xfs_defer_init() with an assert that verifies the
transaction has a NULLFSBLOCK firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bunmapi() callers to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the xfs_dir_*() functions pass ->t_firstblock as the
firstblock parameter. Drop the parameter and access ->t_firstblock
directly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Callers of the xfs_dir_*() functions currently pass an on-stack
firstblock variable. While the dirops infrastructure carries a
pointer to this variable, it never rolls the transaction and so it
is safe to use ->t_firstblock instead.
Fix up the various xfs_dir_*() callers to use ->t_firstblock. Also
remove the unnecessary parameter for xfs_cross_rename().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most callers of xfs_defer_init() immediately attach the dfops
structure to a transaction. Add a transaction parameter to eliminate
much of this boilerplate code. This also helps self-document the
fact that many codepaths now expect a dfops pointer implicitly via
xfs_trans->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all xfs_bunmapi() callers use ->t_dfops, remove the
unnecessary parameter and access ->t_dfops directly. This patch does
not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares
the latter to no longer require a dfops parameter.
Note that xfs_itruncate_extents_flags() associates a local dfops
with a transaction provided from the caller. Since there are
multiple callers, set and reset ->t_dfops before the function
returns to avoid exposure of stack memory to the caller.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers of the directory create, rename and remove interfaces
already associate the dfops with the transaction. Drop the dfops
parameters in these calls in preparation for further cleanups in the
layers below. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode free callchain starting in xfs_inactive_ifree() already
associates its dfops with the transaction. It still passes the dfops
on the stack down through xfs_difree_inobt(), however.
Clean up the call stack and reference dfops directly from the
transaction. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ->t_agfl_dfops field is currently used to defer agfl block frees
from associated transaction contexts. While all known problematic
contexts have already been updated to use ->t_agfl_dfops, the
broader goal is defer agfl frees from all callers that already use a
deferred operations structure. Further, the transaction field
facilitates a good amount of code clean up where the transaction and
dfops have historically been passed down through the stack
separately.
Rename the field to something more generic to prepare to use it as
such throughout XFS. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When a corrupt inode is detected during xfs_iflush_cluster, we can
get a shutdown ASSERT failure like this:
XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116
XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9
XFS (pmem1): Please umount the filesystem and rectify the problem(s)
XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258
.....
Call Trace:
xfs_iflush_abort+0x10a/0x110
xfs_iflush+0xf3/0x390
xfs_inode_item_push+0x126/0x1e0
xfsaild+0x2c5/0x890
kthread+0x11c/0x140
ret_from_fork+0x24/0x30
Essentially, xfs_iflush_abort() has been called twice on the
original inode that that was flushed. This happens because the
inode has been flushed to teh buffer successfully via
xfs_iflush_int(), and so when another inode is detected as corrupt
in xfs_iflush_cluster, the buffer is marked stale and EIO, and
iodone callbacks are run on it.
Running the iodone callbacks walks across the original inode and
calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns
to xfs_iflush(), it runs the error path for that function, and that
calls xfs_iflush_abort() on the inode a second time, leading to the
above assert failure as the inode is not flush locked anymore.
This bug has been there a long time.
The simple fix would be to just avoid calling xfs_iflush_abort() in
xfs_iflush() if we've got a failure from xfs_iflush_cluster().
However, xfs_iflush_cluster() has magic delwri buffer handling that
means it may or may not have run IO completion on the buffer, and
hence sometimes we have to call xfs_iflush_abort() from
xfs_iflush(), and sometimes we shouldn't.
After reading through all the error paths and the delwri buffer
code, it's clear that the error handling in xfs_iflush_cluster() is
unnecessary. If the buffer is delwri, it leaves it on the delwri
list so that when the delwri list is submitted it sees a shutdown
fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO
and runs IO completion. i.e. exactly what xfs+iflush_cluster() does
when it's not a delwri buffer. Further, marking a buffer stale
clears the _XBF_DELWRI_Q flag on the buffer, which means when
submission of the buffer occurs, it just skips over it and releases
it.
IOWs, the error handling in xfs_iflush_cluster doesn't need to care
if the buffer is already on a the delwri queue or not - it just
needs to mark the buffer stale, EIO and run completions. That means
we can just use the easy fix for xfs_iflush() to avoid the double
abort.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
do_mod() is a hold-over from when we have different sizes for file
offsets and and other internal values for 40 bit XFS filesystems.
Hence depending on build flags variables passed to do_mod() could
change size. We no longer support those small format filesystems and
hence everything is of fixed size theses days, even on 32 bit
platforms.
As such, we can convert all the do_mod() callers to platform
optimised modulus operations as defined by linux/math64.h.
Individual conversions depend on the types of variables being used.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the per-ag inode number verifiers to detect corrupt lists and error
out, instead of using ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The changes to skip discards of speculative preallocation and
unwritten extents introduced several new wrapper functions through
the bunmapi -> extent free codepath to reduce churn in all of the
associated callers. In several cases, these wrappers simply toggle a
single flag to skip or not skip discards for the resulting blocks.
The explicit _nodiscard() wrappers for such an isolated set of
callers is a bit overkill. Kill off these wrappers and replace with
the calls to the underlying functions in the contexts that need to
control discard behavior. Retain the wrappers that preserve the
original calling conventions to serve the original purpose of
reducing code churn.
This is a refactoring patch and does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags argument is always zero, get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We've had reports of online discard operations being sent from XFS
on write-only workloads. These discards occur as a result of
eofblocks trims that can occur after a large file copy completes.
These discards are slightly confusing for users who might be paying
close attention to online discards (i.e., vdo) due to performance
sensitivity. They also happen to be spurious because freed post-eof
blocks by definition have not been written to during the current
allocation cycle.
Update xfs_free_eofblocks() to skip discards that are purely
attributed to eofblocks trims. This cuts down the number of spurious
discards that may occur on write-only workloads due to normal
preallocation activity.
Note that discards of post-eof extents can still occur from other
codepaths that do not isolate handling of post-eof blocks from those
within eof. For example, file unlinks and truncates may still cause
discards for any file blocks affected by the operation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The log item flags contain a field that is protected by the AIL
lock - the XFS_LI_IN_AIL flag. We use non-atomic RMW operations to
set and clear these flags, but most of the updates and checks are
not done with the AIL lock held and so are susceptible to update
races.
Fix this by changing the log item flags to use atomic bitops rather
than be reliant on the AIL lock for update serialisation.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Directory operations can perform block allocations as entries are
added/removed from directories. Defer AGFL block frees from the
remaining directory operation transactions. This covers the hard
link, remove and rename operations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inode allocation can require block allocation for physical inode
chunk allocation, inode btree record insertion, and/or directory
block allocation for entry insertion. Any of these block allocation
requests can require AGFL fixups prior to the actual allocation.
Update the common file creation transacions to defer AGFL frees from
these contexts to avoid too much log reservation consumption
per-transaction.
Since these transactions are already passed down through the btree
cursors and da_args structure, this simply requires to attach dfops
to the transaction. Note that this covers tr_create, tr_mkdir and
tr_symlink. Other transactions such as tr_create_tmpfile do not
already make use of deferred operations and so are left alone for
the time being.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS inode chunks are already freed via deferred operations (which
now also defer AGFL block frees), but inode btree blocks are freed
directly in the associated context. This has been known to lead to
log reservation overruns in particular workloads where an inobt
block free may require several AGFL block frees (and thus several
allocation btree modifications) before the inobt block itself is
actually freed.
To avoid this problem, defer the frees of any AGFL blocks before the
inobt block free takes place. This requires passing the dfops from
xfs_inactive_ifree() down through the inobt ->[alloc|free]_block()
callouts, which essentially only requires to attach the dfops to the
transaction since it is already carried all the way through to the
inobt update and allocation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we have corrupted free inode btrees, we can attempt to
allocate inodes that we know are already allocated. Catch allocation
of these inodes and report corruption as early as possible to
prevent corruption propagation or deadlocks.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_itruncate_extents, only cancel cow blocks and clear the reflink
flag if we were asked to truncate the data fork. Attr fork blocks
cannot be shared, so this makes no sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_dir_ialloc() rolls the current transaction when allocation of a new
inode required the space manager to perform an allocation and replinish
the Inode btree.
None of the callers of xfs_dir_ialloc() need to know if the
transaction was committed. Hence this commit removes the "committed"
argument of xfs_dir_ialloc.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Today if we run xfs_fsr and crash[1], log replay can fail because
the recovery code tries to instantiate the donor inode from
disk to replay the swapext, but it's been deleted and we get
verifier failures when we try to read the inode off disk with
i_mode == 0.
This fixes both sides: We don't log the swapext change if the
inode has been deleted, and we don't try to recover it either.
[1] or if systemd doesn't cleanly unmount root, as it is wont
to do ...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to a single interface for flushing the log to a specific LSN, which
gives consistent trace point coverage and a less confusing interface.
The was only a single user of the previous xfs_log_force_lsn function,
which now also passes a NULL log_flushed argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There's no point in allocating a transaction and locking the inode in
preparation to clear cow blocks if there actually are any cow fork
extents. Therefore, move the xfs_reflink_cancel_cow_range hunk to
xfs_inactive and check the cow ifp first. This makes inode reclamation
run faster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
- Log faulting code locations when verifiers fail, for improved diagnosis
of corrupt filesystems.
- Implement metadata verifiers for local format inode fork data.
- Online scrub now cross-references metadata records with other metadata.
- Refactor the fs geometry ioctl generation functions.
- Harden various metadata verifiers.
- Fix various accounting problems.
- Fix uncancelled transactions leaking when xattr functions fail.
- Prevent the copy-on-write speculative preallocation garbage collector
from racing with writeback.
- Emit log reservation type information as trace data so that we can
compare against xfsprogs.
- Fix some erroneous asserts in the online scrub code.
- Clean up the transaction reservation calculations.
- Fix various minor bugs in online scrub.
- Log complaints about mixed dio/buffered writes once per day and less
noisily than before.
- Refactor buffer log item lists to use list_head.
- Break PNFS leases before reflinking blocks.
- Reduce lock contention on reflink source files.
- Fix some quota accounting problems with reflink.
- Fix a serious corruption problem in the direct cow write code where we
fed bad iomaps to the vfs iomap consumers.
- Various other refactorings.
- Remove EXPERIMENTAL tag from reflink!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HL5B
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"This merge cycle, we're again some substantive changes to XFS.
Metadata verifiers have been restructured to provide more detail about
which part of a metadata structure failed checks, and we've enhanced
the new online fsck feature to cross-reference extent allocation
information with the other metadata structures. With this pull, the
metadata verification part of online fsck is more or less finished,
though the feature is still experimental and still disabled by
default.
We're also preparing to remove the EXPERIMENTAL tag from a couple of
features this cycle. This week we're committing a bunch of space
accounting fixes for reflink and removing the EXPERIMENTAL tag from
reflink; I anticipate that we'll be ready to do the same for the
reverse mapping feature next week. (I don't have any pending fixes for
rmap; however I wish to remove the tags one at a time.)
This giant pile of patches has been run through a full xfstests run
over the weekend and through a quick xfstests run against this
morning's master, with no major failures reported. Let me know if
there's any merge problems -- git merge reported that one of our
patches touched the same function as the i_version series, but it
resolved things cleanly.
Summary:
- Log faulting code locations when verifiers fail, for improved
diagnosis of corrupt filesystems.
- Implement metadata verifiers for local format inode fork data.
- Online scrub now cross-references metadata records with other
metadata.
- Refactor the fs geometry ioctl generation functions.
- Harden various metadata verifiers.
- Fix various accounting problems.
- Fix uncancelled transactions leaking when xattr functions fail.
- Prevent the copy-on-write speculative preallocation garbage
collector from racing with writeback.
- Emit log reservation type information as trace data so that we can
compare against xfsprogs.
- Fix some erroneous asserts in the online scrub code.
- Clean up the transaction reservation calculations.
- Fix various minor bugs in online scrub.
- Log complaints about mixed dio/buffered writes once per day and
less noisily than before.
- Refactor buffer log item lists to use list_head.
- Break PNFS leases before reflinking blocks.
- Reduce lock contention on reflink source files.
- Fix some quota accounting problems with reflink.
- Fix a serious corruption problem in the direct cow write code where
we fed bad iomaps to the vfs iomap consumers.
- Various other refactorings.
- Remove EXPERIMENTAL tag from reflink!"
* tag 'xfs-4.16-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (94 commits)
xfs: remove experimental tag for reflinks
xfs: don't screw up direct writes when freesp is fragmented
xfs: check reflink allocation mappings
iomap: warn on zero-length mappings
xfs: treat CoW fork operations as delalloc for quota accounting
xfs: only grab shared inode locks for source file during reflink
xfs: allow xfs_lock_two_inodes to take different EXCL/SHARED modes
xfs: reflink should break pnfs leases before sharing blocks
xfs: don't clobber inobt/finobt cursors when xref with rmap
xfs: skip CoW writes past EOF when writeback races with truncate
xfs: preserve i_rdev when recycling a reclaimable inode
xfs: refactor accounting updates out of xfs_bmap_btalloc
xfs: refactor inode verifier corruption error printing
xfs: make tracepoint inode number format consistent
xfs: always zero di_flags2 when we free the inode
xfs: call xfs_qm_dqattach before performing reflink operations
xfs: bmap code cleanup
Use list_head infra-structure for buffer's log items list
Split buffer's b_fspriv field
Get rid of xfs_buf_log_item_t typedef
...
-----BEGIN PGP SIGNATURE-----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=iihN
-----END PGP SIGNATURE-----
Merge tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull inode->i_version rework from Jeff Layton:
"This pile of patches is a rework of the inode->i_version field. We
have traditionally incremented that field on every inode data or
metadata change. Typically this increment needs to be logged on disk
even when nothing else has changed, which is rather expensive.
It turns out though that none of the consumers of that field actually
require this behavior. The only real requirement for all of them is
that it be different iff the inode has changed since the last time the
field was checked.
Given that, we can optimize away most of the i_version increments and
avoid dirtying inode metadata when the only change is to the i_version
and no one is querying it. Queries of the i_version field are rather
rare, so we can help write performance under many common workloads.
This patch series converts existing accesses of the i_version field to
a new API, and then converts all of the in-kernel filesystems to use
it. The last patch in the series then converts the backend
implementation to a scheme that optimizes away a large portion of the
metadata updates when no one is looking at it.
In my own testing this series significantly helps performance with
small I/O sizes. I also got this email for Christmas this year from
the kernel test robot (a 244% r/w bandwidth improvement with XFS over
DAX, with 4k writes):
https://lkml.org/lkml/2017/12/25/8
A few of the earlier patches in this pile are also flowing to you via
other trees (mm, integrity, and nfsd trees in particular)".
* tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: (22 commits)
fs: handle inode->i_version more efficiently
btrfs: only dirty the inode in btrfs_update_time if something was changed
xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementing
fs: only set S_VERSION when updating times if necessary
IMA: switch IMA over to new i_version API
xfs: convert to new i_version API
ufs: use new i_version API
ocfs2: convert to new i_version API
nfsd: convert to new i_version API
nfs: convert to new i_version API
ext4: convert to new i_version API
ext2: convert to new i_version API
exofs: switch to new i_version API
btrfs: convert to new i_version API
afs: convert to new i_version API
affs: convert to new i_version API
fat: convert to new i_version API
fs: don't take the i_lock in inode_inc_iversion
fs: new API for handling inode->i_version
ntfs: remove i_version handling
...
Refactor xfs_lock_two_inodes to take separate locking modes for each
inode. Specifically, this enables us to take a SHARED lock on one inode
and an EXCL lock on the other. The lock class (MMAPLOCK/ILOCK) must be
the same for each inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor inode verifier error reporting into a non-libxfs function so
that we aren't encoding the message format in libxfs. This also
changes the kernel dmesg output to resemble buffer verifier errors
more closely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Always zero the di_flags2 field when we free the inode so that we never
end up with an on-disk record for an unallocated inode that also has the
reflink iflag set. This is in keeping with the general principle that
only files can have the reflink iflag set, even though we'll zero out
di_flags2 if we ever reallocate the inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that buffer's b_fspriv has been split, just replace the current
singly linked list of xfs_log_items, by the list_head infrastructure.
Also, remove the xfs_log_item argument from xfs_buf_resubmit_failed_buffers(),
there is no need for this argument, once the log items can be walked
through the list_head in the buffer.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor style cleanups]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
By splitting the b_fspriv field into two different fields (b_log_item
and b_li_list). It's possible to get rid of an old ABI workaround, by
using the new b_log_item field to store xfs_buf_log_item separated from
the log items attached to the buffer, which will be linked in the new
b_li_list field.
This way, there is no more need to reorder the log items list to place
the buf_log_item at the beginning of the list, simplifying a bit the
logic to handle buffer IO.
This also opens the possibility to change buffer's log items list into a
proper list_head.
b_log_item field is still defined as a void *, because it is still used
by the log buffers to store xlog_in_core structures, and there is no
need to add an extra field on xfs_buf just for xlog_in_core.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor style changes]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Starting with commit 57e734423a ("vsprintf: refactor %pK code out of
pointer"), the behavior of the raw '%p' printk format specifier was
changed to print a 32-bit hash of the pointer value to avoid leaking
kernel pointers into dmesg. For most situations that's good.
This is /undesirable/ behavior when we're trying to debug XFS, however,
so define a PTR_FMT that prints the actual pointer when we're in debug
mode.
Note that %p for tracepoints still prints the raw pointer, so in the
long run we could consider rewriting some of these messages as
tracepoints.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use the %pS instead of the %pF printk format specifier for printing
symbols from direct addresses. This is needed for the ia64, ppc64 and
parisc64 architectures.
While we're at it, be consistent with the capitalization of the 'S'.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since %p prepends "0x" to the outputted string, we can drop the prefix.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Replace the current haphazard dir2 shortform verifier callsites with a
centralized verifier function that can be called either with the default
verifier functions or with a custom set. This helps us strengthen
integrity checking while providing us with flexibility for repair tools.
xfs_repair wants this to be able to supply its own verifier functions
when trying to fix possibly corrupt metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently, xfs_itruncate_extents clears the cowblocks tag if i_cnextents
is zero. This is wrong, since i_cnextents only tracks real extents in
the CoW fork, which means that we could have some delayed CoW
reservations still in there that will now never get cleaned.
Fix a further bug where we /don't/ clear the reflink iflag if there are
any attribute blocks -- really, it's only safe to clear the reflink flag
if there are no data fork extents and no cow fork extents.
Found by adding clonerange to fsstress in xfs/017.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file. Prior to commit
43518812d2 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.
However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy. This test
was found by turning on kmemleak for generic/001 or generic/388.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the current linear list and the indirection array for the in-core
extent list with a b+tree to avoid the need for larger memory allocations
for the indirection array when lots of extents are present. The current
extent list implementations leads to heavy pressure on the memory
allocator when modifying files with a high extent count, and can lead
to high latencies because of that.
The replacement is a b+tree with a few quirks. The leaf nodes directly
store the extent record in two u64 values. The encoding is a little bit
different from the existing in-core extent records so that the start
offset and length which are required for lookups can be retreived with
simple mask operations. The inner nodes store a 64-bit key containing
the start offset in the first half of the node, and the pointers to the
next lower level in the second half. In either case we walk the node
from the beginninig to the end and do a linear search, as that is more
efficient for the low number of cache lines touched during a search
(2 for the inner nodes, 4 for the leaf nodes) than a binary search.
We store termination markers (zero length for the leaf nodes, an
otherwise impossible high bit for the inner nodes) to terminate the key
list / records instead of storing a count to use the available cache
lines as efficiently as possible.
One quirk of the algorithm is that while we normally split a node half and
half like usual btree implementations we just spill over entries added at
the very end of the list to a new node on its own. This means we get a
100% fill grade for the common cases of bulk insertion when reading an
inode into memory, and when only sequentially appending to a file. The
downside is a slightly higher chance of splits on the first random
insertions.
Both insert and removal manually recurse into the lower levels, but
the bulk deletion of the whole tree is still implemented as a recursive
function call, although one limited by the overall depth and with very
little stack usage in every iteration.
For the first few extents we dynamically grow the list from a single
extent to the next powers of two until we have a first full leaf block
and that building the actual tree.
The code started out based on the generic lib/btree.c code from Joern
Engel based on earlier work from Peter Zijlstra, but has since been
rewritten beyond recognition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the error injection tag names into a libxfs header so that we can
share it between kernel and userspace.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We can simply use the i_rdev field in the Linux inode and just convert
to and from the XFS dev_t when reading or logging/writing the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have speculative cow preallocations hanging around in the cow
fork, don't let a truncate operation clear the reflink flag because if
we do then there's a chance we'll forget to free those extents when we
destroy the incore inode.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
And instead require callers to explicitly join the inode using
xfs_defer_ijoin. Also consolidate the defer error handling in
a few places using a goto label.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split xfs_trans_roll into a low-level helper that just rolls the
actual transaction and a new higher level xfs_trans_roll_inode
that takes care of logging and rejoining the inode. This gets
rid of the NULL inode case, and allows to simplify the special
cases in the deferred operation code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
After xfs_ifree_cluster() finds an inode in the radix tree and verifies
that the inode number is what it expected, xfs_reclaim_inode() can swoop
in and free it. xfs_ifree_cluster() will then happily continue working
on the freed inode. Most importantly, it will mark the inode stale,
which will probably be overwritten when the inode slab object is
reallocated, but if it has already been reallocated then we can end up
with an inode spuriously marked stale.
In 8a17d7dded ("xfs: mark reclaimed inodes invalid earlier") we added
a second check to xfs_iflush_cluster() to detect this race, but the
similar RCU lookup in xfs_ifree_cluster() needs the same treatment.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
According to the commit that implemented per-inode DAX flag:
commit 58f88ca2df ("xfs: introduce per-inode DAX enablement")
the flag is supposed to act as "inherit flag".
Currently this only works in the situations where parent directory
already has a flag in di_flags set, otherwise inheritance does not
work. This is because setting the XFS_DIFLAG2_DAX flag is done in a
wrong branch designated for di_flags, not di_flags2.
Fix this by moving the code to branch designated for setting di_flags2,
which does test for flags in di_flags2.
Fixes: 58f88ca2df ("xfs: introduce per-inode DAX enablement")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/GZI
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"Here are some changes for you for 4.13. For the most part it's fixes
for bugs and deadlock problems, and preparation for online fsck in
some future merge window.
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths"
* tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: don't crash on unexpected holes in dir/attr btrees
xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN
xfs: fix contiguous dquot chunk iteration livelock
xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA
vfs: Add iomap_seek_hole and iomap_seek_data helpers
vfs: Add page_cache_seek_hole_data helper
xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk
xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent
xfs: Check for m_errortag initialization in xfs_errortag_test
xfs: grab dquots without taking the ilock
xfs: fix semicolon.cocci warnings
xfs: Don't clear SGID when inheriting ACLs
xfs: free cowblocks and retry on buffered write ENOSPC
xfs: replace log_badcrc_factor knob with error injection tag
xfs: convert drop_writes to use the errortag mechanism
xfs: remove unneeded parameter from XFS_TEST_ERROR
xfs: expose errortag knobs via sysfs
xfs: make errortag a per-mountpoint structure
xfs: free uncommitted transactions during log recovery
xfs: don't allow bmap on rt files
...
Since we moved the injected error frequency controls to the mountpoint,
we can get rid of the last argument to XFS_TEST_ERROR.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Rename 'struct wait_bit_queue::wait' to ::wq_entry, to more clearly
name it as a wait-queue entry.
Propagate it to a couple of usage sites where the wait-bit-queue internals
are exposed.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a purely mechanical patch that removes the private
__{u,}int{8,16,32,64}_t typedefs in favor of using the system
{u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform
the transformation and fix the resulting whitespace and indentation
errors:
s/typedef\t__uint8_t/typedef __uint8_t\t/g
s/typedef\t__uint/typedef __uint/g
s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g
s/__uint8_t\t/__uint8_t\t\t/g
s/__uint/uint/g
s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g
s/__int/int/g
/^typedef.*int[0-9]*_t;$/d
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Lockdep complains about use of the iolock in inode reclaim context
because it doesn't understand that reclaim has the last reference to
the inode, and thus an iolock->reclaim->iolock deadlock is not
possible.
The iolock is technically not necessary in xfs_inactive() and was
only added to appease an assert in xfs_free_eofblocks(), which can
be called from other non-reclaim contexts. Therefore, just kill the
assert and drop the use of the iolock from reclaim context to quiet
lockdep.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
