commit 83aa012048 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/perf/util/annotate.c, e.g. on debian
unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that perf can still disassemble bpf programs by using bpftrace
under load, recording a perf trace, and then annotating the bpf "function"
with and without the changes. With old binutils there's no change in output
before/after this patch. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:
1.15 : 55:mov %rbp,%rdx
0.00 : 58:add $0xfffffffffffffff8,%rdx
0.00 : 5c:xor %ecx,%ecx
- 1.03 : 5e:callq 0xffffffffe12aca3c
+ 1.03 : 5e:call 0xffffffffe12aca3c
0.00 : 63:xor %eax,%eax
- 2.18 : 65:leaveq
- 2.82 : 66:retq
+ 2.18 : 65:leave
+ 2.82 : 66:ret
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-5-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25f69c69bc ]
When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.
In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.
Before this fix the event is not counted:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
<not counted> instructions
1.901661124 seconds time elapsed
0.001602000 seconds user
0.000000000 seconds sys
After fix it works:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
404,214 instructions
1.901743475 seconds time elapsed
0.001617000 seconds user
0.000000000 seconds sys
Fixes: c587e77e10 ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ce9f1c05d2 upstream.
When MMAP2 has the PERF_RECORD_MISC_MMAP_BUILD_ID flag, it means the
record already has the build-id info. So it marks the DSO as hit, to
skip if the same DSO is not processed if it happens to miss the build-id
later.
But it missed to copy the MMAP2 record itself so it'd fail to symbolize
samples for those regions.
For example, the following generates 249 MMAP2 events.
$ perf record --buildid-mmap -o- true | perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.8%)
Adding perf inject should not change the number of events like this
$ perf record --buildid-mmap -o- true | perf inject -b | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
But when --buildid-all is used, it eats most of the MMAP2 events.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 1 ( 2.5%)
With this patch, it shows the original number now.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
Committer testing:
Before:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 2 ( 1.9%)
$
After:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (29.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (34.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (38.4%)
$
Fixes: f7fc0d1c91 ("perf inject: Do not inject BUILD_ID record if MMAP2 has it")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230223070155.54251-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2750af50a3 upstream.
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ffd1240e8f ]
On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:
[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory
Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.
Fixes: 74cd5815d9 ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeb802f872 ]
When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first. That won't work with pipe since it needs
lseek() to read the scattered aux data.
$ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
# To display the perf.data header info, please use --header/--header-only options.
#
0x4118 [0xa0]: failed to process type: 70
Error:
failed to process sample
For the pipe mode, it can handle the aux data as it gets. But there's
no guarantee it can get the aux data in time. So the following warning
will be shown at the beginning:
WARNING: Intel PT with pipe mode is not recommended.
The output cannot relied upon. In particular,
time stamps and the order of events may be incorrect.
Fixes: dbd134322e ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7015e50a9 ]
ptwrite is an Intel x86 instruction that writes arbitrary values into an
Intel PT trace. It is not supported on all hardware, so provide an
alternative that makes use of TNT packets to convey the payload data.
TNT packets encode Taken/Not-taken conditional branch information, so
taking branches based on the payload value will encode the value into
the TNT packet. Refer to the changes to the documentation file
perf-intel-pt.txt in this patch for an example.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e5e641045 ]
Add an EXAMPLE section and link to the perf wiki's Intel PT page.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220426133213.248475-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e3599c5a ]
Add documentation for Event Trace and TNT disable to the perf Intel PT man
page.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-26-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aeb802f872 ("perf intel-pt: Do not try to queue auxtrace data on pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1746212dae ]
In copy_bytes(), it reads the data from the (input) fd and writes it to
the output file. But it does with the read(2) unconditionally which
caused a problem of mixing buffered vs unbuffered I/O together.
You can see the problem when using pipes.
$ perf record -e intel_pt// -o- true | perf inject -b > /dev/null
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
0x45c0 [0x30]: failed to process type: 71
It should use perf_data__read() to honor the 'use_stdio' setting.
Fixes: 601366678c ("perf data: Allow to use stdio functions for pipe mode")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f19aab47c ]
The LLVM template is first echo-ed into command_out and then
command_out executed. The echo surrounds the template with double
quotes, however, the template itself may contain quotes. This is
generally innocuous but in tools/perf/tests/bpf-script-test-prologue.c
we see:
...
SEC("func=null_lseek file->f_mode offset orig")
...
where the first double quote ends the double quote of the echo, then
the > redirects output into a file called f_mode.
To avoid this inadvertent behavior substitute redirects and similar
characters to be ASCII control codes, then substitute the output in
the echo back again.
Fixes: 5eab5a7ee0 ("perf llvm: Display eBPF compiling command in debug output")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230105082609.344538-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d891f2b724 ]
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef32 ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cf129830ee upstream.
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bdea6f79 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 54b353a20c ]
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9dfc46c67 ]
DWARF version 5 standard Sec 2.14 says that
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: 3f4460a28f ("perf probe: Filter out redundant inline-instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f828929ab7 ]
Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute
acccessor functions, so that it can find the specified attribute from
abstact origin DIE etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731051988.2100653.13595339994343449770.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a9dfc46c67 ("perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c587e77e10 ]
The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too. This is not the intention, let's fix it.
Before:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
4,326,949,337 cycles
4.007494118 seconds time elapsed
real 0m7.474s
user 0m0.356s
sys 0m0.120s
It ran the workload for 4 seconds and gave the 3 second delay. So it
should skip the first 3 second and measure the last 1 second only. But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds. So the total time (real) was 7 seconds.
After:
$ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
Events disabled
Events enabled
Performance counter stats for 'system wide':
1,063,551,013 cycles
1.002769510 seconds time elapsed
real 0m4.484s
user 0m0.385s
sys 0m0.086s
The bug was introduced when it changed enablement of system-wide events
with a command line workload. But it should've considered the initial
delay case. The code was reworked since then (in bb8bc52e75) so I'm
afraid it won't be applied cleanly.
Fixes: d0a0a51149 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb8bc52e75 ]
This extracts common code from the branches of the forks if-then-else.
enable_counters(), which was at the beginning of both branches of the
conditional, is now unconditional; evlist__start_workload() is extracted
to a different if, which enables making the common clocking code
unconditional.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220729161244.10522-1-adrian.herrera@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: c587e77e10 ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f520ce179 ]
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aac ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e9a5d8eb ]
On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.
We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().
Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall. trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.
So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eadcab4c7a ]
This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb ("perf trace: Handle failure when trace point folder is missed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4223e1776 ]
When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero. Finally, without
returning an error value it introduces confusion for the caller.
This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.
Fixes: b8b1033fca ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d957ae51 ]
Commit 3af1dfdd51 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221103092704.173391-1-dolinux.peng@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad353b710c ]
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b92dd11725 ]
Testcase stat_all_metrics.sh fails in powerpc:
90: perf all metrics test : FAILED!
The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list. It runs perf metric events with
various commands and expects non-empty metric result.
Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.
Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.
Result in powerpc box after this patch changes:
90: perf all metrics test : Ok
Fixes: a3cbcadfdf ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cba04f3136 upstream.
For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.
Fix by matching the name string up to the separating tab character.
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e552b7be12 ]
If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.
Before this change with a kernel adding 'config3' I get:
$ perf record -e arm_spe// -- true
event syntax error: 'arm_spe//'
\___ Cannot find PMU `arm_spe'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list
available events
After this change, I get:
$ perf record -e arm_spe// -- true
WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.091 MB perf.data ]
To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5a3d47071f upstream.
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eabd452339 ]
Previously the broken modifier causes a usage message to printed but
nothing else.
After:
$ perf stat -e 'cycles:kk' -a sleep 2
event syntax error: 'cycles:kk'
\___ Bad modifier
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e '{instructions,cycles}:kk' -a sleep 2
event syntax error: '..ns,cycles}:kk'
\___ Bad modifier
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Denys Zagorui <dzagorui@cisco.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: ShihCheng Tu <mrtoastcheng@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20211015172132.1162559-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 71c86cda75 ("perf parse-events: Remove "not supported" hybrid cache events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 999e4eaa4b ]
It needs to enter the namespace before reading a file.
Fixes: 4183a8d70a ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220920222822.2171056-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b427df27b ]
/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing
even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Fixes: fc1b691d76 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit babd04386b ]
The missing header makes it hard for programs like elfutils to open
these files.
Fixes: 2d86612aac ("perf symbol: Correct address for bss symbols")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Lieven Hey <lieven.hey@kdab.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d77326c33 ]
It seems the recent libbpf got more strict about the section name.
I'm seeing a failure like this:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup ^. sleep 1
libbpf: prog 'on_cgrp_switch': missing BPF prog type, check ELF section name 'perf_events'
libbpf: prog 'on_cgrp_switch': failed to load: -22
libbpf: failed to load object 'bperf_cgroup_bpf'
libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -22
Failed to load cgroup skeleton
The section name should be 'perf_event' (without the trailing 's').
Although it's related to the libbpf change, it'd be better fix the
section name in the first place.
Fixes: 944138f048 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220916184132.1161506-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9d5f0c3643 upstream.
Its more intention revealing, and if we're interested in the odd cases
where this may end up truncating we can do debug checks at one
centralized place.
Motivation, of all the container builds, fedora rawhide started
complaining of:
util/machine.c: In function ‘machine__create_modules’:
util/machine.c:1419:50: error: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
1419 | snprintf(path, sizeof(path), "%s/%s", dir_name, dent->d_name);
| ^~
In file included from /usr/include/stdio.h:894,
from util/branch.h:9,
from util/callchain.h:8,
from util/machine.c:7:
In function ‘snprintf’,
inlined from ‘maps__set_modules_path_dir’ at util/machine.c:1419:3,
inlined from ‘machine__set_modules_path’ at util/machine.c:1473:9,
inlined from ‘machine__create_modules’ at util/machine.c:1519:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 2 and 4352 bytes into a destination of size 4096
There are other places where we should use path__join(), but lets get rid of
this one first.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: Link: https://lore.kernel.org/r/YebZKjwgfdOz0lAs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 82b2425fad ]
Commit b91e5492f9 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.
The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.
Before:
#./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
0x120 [0x90]: failed to process type: 64
#
After:
# ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100
ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71
ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0
ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1
ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58
#
[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/
Fixes: b91e5492f9 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bf515f024e upstream.
If a weak group is broken then the reset_group flag remains set for
the next run. Having reset_group set means the counter isn't created
and ultimately a segfault.
A simple reproduction of this is:
# perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W
which will be added as a test in the next patch.
Fixes: 4804e01116 ("perf stat: Use affinity for opening events")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220822213352.75721-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc9e7fe313 upstream.
The previous change to Python autodetection had a small mistake where
the auto value was used to determine the Python binary, rather than the
user supplied value. The Python binary is only used for one part of the
build process, rather than the final linking, so it was producing
correct builds in most scenarios, especially when the auto detected
value matched what the user wanted, or the system only had a valid set
of Pythons.
Change it so that the Python binary path is derived from either the
PYTHON_CONFIG value or PYTHON value, depending on what is specified by
the user. This was the original intention.
This error was spotted in a build failure an odd cross compilation
environment after commit 4c41cb46a7 ("perf python: Prefer
python3") was merged.
Fixes: 630af16eee ("perf tools: Use Python devtools for version autodetection rather than runtime")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1da1d60774 upstream.
If cpu_core PMU event fails to parse, try also cpu_atom PMU event when
parsing cycles event.
Fixes: 43eb05d066 ("perf tests: Support 'Track with sched_switch' test for hybrid")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220809080702.6921-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e828582b8 upstream.
parse_events() is often called with parse_events_error set to NULL.
Make parse_events_error__handle() not segfault in that case.
A subsequent patch changes to avoid passing NULL in the first place.
Fixes: 43eb05d066 ("perf tests: Support 'Track with sched_switch' test for hybrid")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220809080702.6921-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bf6dcaa93 upstream.
If a memory allocation fail, we should branch to the error handling path
in order to free some resources allocated a few lines above.
Fixes: 15354d5469 ("perf probe: Generate event name with line number")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-janitors@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/b71bcb01fa0c7b9778647235c3ab490f699ba278.1659797452.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91cea6be90 ]
When genelf was introduced it tested for HAVE_LIBCRYPTO not
HAVE_LIBCRYPTO_SUPPORT, which is the define the feature test for openssl
defines, fix it.
This also adds disables the deprecation warning, someone has to fix this
to build with openssl 3.0 before the warning becomes a hard error.
Fixes: 9b07e27f88 ("perf inject: Add jitdump mmap injection support")
Reported-by: 谭梓煊 <tanzixuan.me@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/YulpPqXSOG0Q4J1o@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d518ac7be ]
The perf jvmti agent doesn't create program headers, in this case
fallback on section headers as happened previously.
Committer notes:
To test this, from a public post by Ian:
1) download a Java workload dacapo-9.12-MR1-bach.jar from
https://sourceforge.net/projects/dacapobench/
2) build perf such as "make -C tools/perf O=/tmp/perf NO_LIBBFD=1" it
should detect Java and create /tmp/perf/libperf-jvmti.so
3) run perf with the jvmti agent:
perf record -k 1 java -agentpath:/tmp/perf/libperf-jvmti.so -jar dacapo-9.12-MR1-bach.jar -n 10 fop
4) run perf inject:
perf inject -i perf.data -o perf-injected.data -j
5) run perf report
perf report -i perf-injected.data | grep org.apache.fop
With this patch reverted I see lots of symbols like:
0.00% java jitted-388040-4656.so [.] org.apache.fop.fo.FObj.bind(org.apache.fop.fo.PropertyList)
With the patch (2d86612aac ("perf symbol: Correct address for bss
symbols")) I see lots of:
dso__load_sym_internal: failed to find program header for symbol:
Lorg/apache/fop/fo/FObj;bind(Lorg/apache/fop/fo/PropertyList;)V
st_value: 0x40
Fixes: 2d86612aac ("perf symbol: Correct address for bss symbols")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20220731164923.691193-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68566a7cf5 ]
Synthesized MMAP events have zero ino_generation, so do not compare
them to DSOs with a real ino_generation otherwise we end up with a DSO
without a build id.
Fixes: 0e3149f86b ("perf dso: Move dso_id from 'struct map' to 'struct dso'")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220711093218.10967-2-adrian.hunter@intel.com
[ Added clarification to the comment from Ian + more detailed explanation from Adrian ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d86612aac ]
When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols. This is a common
issue on both x86 and Arm64 platforms.
Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:
...
Disassembly of section .bss:
0000000000004040 <completed.0>:
...
0000000000004080 <buf1>:
...
00000000000040c0 <buf2>:
...
0000000000004100 <thread>:
...
First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.
# ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf2 0x30a8-0x30e8
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf1 0x3068-0x30a8
...
The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section. The perf tool uses below formula to convert
a symbol's memory address to a file address:
file_address = st_value - sh_addr + sh_offset
^
` Memory address
We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.
The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.
Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info. A better choice for converting
memory address to file address is using the formula:
file_address = st_value - p_vaddr + p_offset
This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.
After applying the change:
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf2 0x30c0-0x3100
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf1 0x3080-0x30c0
...
Fixes: f17e04afaf ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb44a6249 ]
The test does not always correctly determine the number of events for
hybrids, nor allow for more than 1 evsel when parsing.
Fix by iterating the events actually created and getting the correct
evsel for the events processed.
Fixes: d9da6f70eb ("perf tests: Support 'Convert perf time to TSC' test for hybrid")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab66fdace8 upstream.
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
Example:
$ echo "int main() {return 0;}" > prog.c
$ gcc -o prog prog.c
$ perf record --buildid-all ./prog
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
$ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
$ file-buildid prog
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ echo "int main() {return 1;}" > prog.c
$ gcc -o prog prog.c
$ file-buildid prog
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
Before:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
$
After:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
$
Fixes: 454c407ec1 ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
