Commit Graph

26 Commits

Author SHA1 Message Date
Peter Rosin c18af98bc8 iio: potentiometer: mcp4531: switch to using .probe_new
Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:12:51 +01:00
Peter Rosin 0f6f400e69 iio: potentiometer: mcp4018: switch to using .probe_new
Use the new probe style for i2c drivers.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 18:09:47 +01:00
Peter Rosin 5214ad6dcc iio: potentiometer: mcp4018: driver for Microchip digital potentiometers
Add support for Microchip digital potentiometers and rheostats
	MCP4017, MCP4018, MCP4019

They all have one wiper with 128 steps and come in 5, 10, 50 and 100 kOhm
variations.

Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22147a.pdf

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10 16:03:25 +00:00
Himanshu Jha a937729c93 iio: potentiometer: ds1803: Remove VLA usage
In preparation to enabling -Wvla, remove VLA usage and replace it
with fixed a fixed length array and therefore, prevent potential
stack overflow attacks.

Fixed as a part of the discussion to remove all VLAs from the kernel:
https://lkml.org/lkml/2018/3/7/621

Cc: keescook@chromium.org
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10 15:02:41 +00:00
Matt Ranostay d6ad805844 iio: add SPDX identifier for various drivers
Add GPLv2+ SPDX identifier and update email for author's drivers.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-18 11:55:19 +00:00
Phil Reid 79e8a32d2a iio: ad5272: Add support for Analog Devices digital potentiometers
Add implementation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-10 15:48:08 +00:00
Linus Torvalds 449fcf3ab0 Staging/IIO patches for 4.15-rc1
Here is the "big" staging and IIO driver update for 4.15-rc1.
 
 Lots and lots of little changes, almost all minor code cleanups as the
 Outreachy application process happened during this development cycle.
 Also happened was a lot of IIO driver activity, and the typec USB code
 moving out of staging to drivers/usb (same commits are in the USB tree
 on a persistent branch to not cause merge issues.)
 
 Overall, it's a wash, I think we added a few hundred more lines than
 removed, but really only a few thousand were modified at all.
 
 All of these have been in linux-next for a while.  There might be a
 merge issue with Al's vfs tree in the pi433 driver (take his changes,
 they are always better), and the media tree with some of the odd atomisp
 cleanups (take the media tree's version).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
 g3ioPBqmqC/2DSbldr2o
 =/ebw
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...
2017-11-13 20:53:28 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jonathan Cameron 7090992708 iio:potentiometer:max5487: Drop explicit setting of module owner
The SPI core has handled this for some time.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-03 18:10:27 +01:00
Jonathan Cameron 6ec7ffd6e9 iio:potentiometer:max5481 drop explicit setting of the owner module.
This has been handled by the spi core for some time.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-03 18:10:26 +01:00
Jonathan Cameron 6d9d020da5 iio:dpot: drop assign iio_info.driver_module
The equivalent of this is now done via macro magic when
the relevant register call is made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 21:34:10 +01:00
Matt Weber df1fd2de11 iio: max5481: Add support for Maxim digital potentiometers
Add implementation for Maxim Integrated 5481, 5482, 5483,
and 5484 digital potentiometer devices.

Datasheet:
http://datasheets.maximintegrated.com/en/ds/MAX5481-MAX5484.pdf

Signed-off-by: Maury Anderson <maury.anderson@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28 12:13:31 +00:00
Javier Martinez Canillas 9c6e4efded iio: potentiometer: mcp4531: Export OF device ID table as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-22 13:21:29 +00:00
Peter Rosin 2704e30014 iio: mcp4531: provide range of available raw values
Example:

$ cat '/sys/bus/iio/devices/iio:device0/out_resistance_raw_available'
[0 1 256]

Meaning: min 0, step 1 and max 256.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:26 +00:00
Florian Vaussard 3629153ce1 iio: potentiometer: Fix typo in Kconfig
Fix s/potentiomenter/potentiometer/.

Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-03 12:40:01 +01:00
Florian Vaussard 2dc2e1899e iio: potentiometer: mcp4531: Add device tree binding
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.

Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-03 12:40:00 +01:00
Florian Vaussard 294ea6f3a1 iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
This patch adds support for MCP454x, MCP456x, MCP464x and MCP466x parts.
The main difference with currently supported parts (MCP453x and alike) is
the addition of a non-volatile memory in order to recall the wiper setting
at power-on. This feature is currently not supported and only the
volatile memory is used to set the wiper.

Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-03 12:39:58 +01:00
Cristina Moraru 9a47894fbe iio: max5487: Add support for Maxim digital potentiometers
Add implementation for Maxim MAX5487, MAX5488, MAX5489
digital potentiometers.

Datasheet:
http://datasheets.maximintegrated.com/en/ds/MAX5487-MAX5489.pdf

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
CC: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-21 20:13:14 +01:00
Matt Ranostay 2763ac94f3 iio: potentiometer: tpl0102: remove unneeded i2c check functionality test
Actually I2C_FUNC_SMBUS_WORD_DATA isn't need for this device, and regmap
handles all single byte reads transparently.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-14 17:56:36 +01:00
Slawomir Stepien fbbc5e7044 iio: potentiometer: add driver for Maxim Integrated DS1803
The following functions are supported:
 - write, read potentiometer value
 - potentiometer scale

Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-10 12:34:09 +01:00
Slawomir Stepien 22d199a539 iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X
The following functionalities are supported:
 - write, read from volatile memory

Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdf

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Reviewed-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:13:42 +01:00
Slawomir Stepien 91307cbeca iio: potentiometer: mcp4531: use pointer to access model parameters
Use const pointer to element from model configuration array rather then array
index, as it will not change anyway.

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 10:27:27 +01:00
Matt Ranostay 844a656367 iio: potentiometer: tpl0102: change i2c functionality return code
Change i2c_check_functionality condition check return from ENOTSUPP to
EOPNOTSUPP which is now the standard return code.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 14:00:57 +00:00
Matt Ranostay f8d9d3b434 iio: convert to common i2c_check_functionality() return value
Previously most drivers that used a i2c_check_functionality() check
condition required various error codes on failure. This patchset
converts to a standard of -EOPNOTSUPP

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-27 17:17:43 +00:00
Matt Ranostay 2edbd2955d iio: potentiometer: add TI tpl0102 support
Add support for the TI family of digital potentiometers.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24 20:40:48 +00:00
Peter Rosin c05dc2cce7 iio: mcp4531: Driver for Microchip digital potentiometers
Add support for Microchip digital potentiometers and rheostats
	MCP4531, MCP4532, MCP4551, MCP4552
	MCP4631, MCP4632, MCP4651, MCP4652

DEVICE   Wipers  Steps  Resistor Opts (kOhm)  i2c address
MCP4531  1       129    5, 10, 50, 100        010111x
MCP4532  1       129    5, 10, 50, 100        01011xx
MCP4551  1       257    5, 10, 50, 100        010111x
MCP4552  1       257    5, 10, 50, 100        01011xx
MCP4631  2       129    5, 10, 50, 100        0101xxx
MCP4632  2       129    5, 10, 50, 100        01011xx
MCP4651  2       257    5, 10, 50, 100        0101xxx
MCP4652  2       257    5, 10, 50, 100        01011xx

Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30 18:20:53 +01:00