Commit graph

62 commits

Author SHA1 Message Date
Christoph Hellwig
7b7a8665ed direct-io: Implement generic deferred AIO completions
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue.  This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.

The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.

Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara.  I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.

JK: Fixed ext4 part, dynamic allocation of the workqueue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04 09:23:46 -04:00
Anatol Pomozov
e8974c3930 ext4: rate limit printk in buffer_io_error()
If there are a lot of outstanding buffered IOs when a device is
taken offline (due to hardware errors etc), ext4_end_bio prints
out a message for each failed logical block. While this is desirable,
we see thousands of such lines being printed out before the
serial console gets overwhelmed, causing ext4_end_bio() wait for
the printk to complete.

This in itself isn't a disaster, except for the detail that this
function is being called with the queue lock held.
This causes any other function in the block layer
to spin on its spin_lock_irqsave while the serial console is
draining. If NMI watchdog is enabled on this machine then it
eventually comes along and shoots the machine in the head.

The end result is that losing any one disk causes the machine to
go down. This patch rate limits the printk to bandaid around the
problem.

Tested: xfstests
Change-Id: I8ab5690dcf4f3a67e78be147d45e489fdf4a88d8
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-11 22:42:42 -04:00
Jan Kara
822dbba334 ext4: fix warning in ext4_evict_inode()
The following race can lead to ext4_evict_inode() seeing i_ioend_count
> 0 and thus triggering a sanity check warning:

        CPU1                                    CPU2
ext4_end_bio()                          ext4_evict_inode()
  ext4_finish_bio()
    end_page_writeback();
                                          truncate_inode_pages()
                                            evict page
                                        WARN_ON(i_ioend_count > 0);
  ext4_put_io_end_defer()
    ext4_release_io_end()
      dec i_ioend_count

This is possible use-after-free bug since we decrement i_ioend_count in
possibly released inode.

Since i_ioend_count is used only for sanity checks one possible solution
would be to just remove it but for now I'd like to keep those sanity
checks to help debugging the new ext4 writeback code.

This patch changes ext4_end_bio() to call ext4_put_io_end_defer() before
ext4_finish_bio() in the shortcut case when unwritten extent conversion
isn't needed.  In that case we don't need the io_end so we are safe to
drop it early.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-10 21:31:04 -04:00
Theodore Ts'o
a1d8d9a757 ext4: add check to io_submit_init_bio
The bio_alloc() function can return NULL if the memory allocation
fails.  So we need to check for this.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-06 10:18:22 -04:00
Jan Kara
5dc23bdd5f ext4: remove ext4_ioend_wait()
Now that we clear PageWriteback after extent conversion, there's no
need to wait for io_end processing in ext4_evict_inode().  Running
AIO/DIO keeps file reference until aio_complete() is called so
ext4_evict_inode() cannot be called.  For io_end structures resulting
from buffered IO waiting is happening because we wait for
PageWriteback in truncate_inode_pages().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:46:12 -04:00
Jan Kara
c724585b62 ext4: don't wait for extent conversion in ext4_punch_hole()
We don't have to wait for extent conversion in ext4_punch_hole() as
buffered IO for the punched range has been flushed and waited upon
(thus all extent conversions for that range have completed).  Also we
wait for all DIO to finish using inode_dio_wait() so there cannot be
any extent conversions pending due to direct IO.

Also remove ext4_flush_unwritten_io() since it's unused now.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:44:36 -04:00
Jan Kara
a115f749c1 ext4: remove wait for unwritten extent conversion from ext4_truncate()
Since PageWriteback bit is now cleared after extents are converted
from unwritten to written ones, we have full exclusion of writeback
path from truncate (truncate_inode_pages() waits for PageWriteback
bits to get cleared on all invalidated pages).  Exclusion from DIO
path is achieved by inode_dio_wait() call in ext4_setattr().  So
there's no need to wait for extent convertion in ext4_truncate()
anymore.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:30:00 -04:00
Jan Kara
b0857d309f ext4: defer clearing of PageWriteback after extent conversion
Currently PageWriteback bit gets cleared from put_io_page() called
from ext4_end_bio().  This is somewhat inconvenient as extent tree is
not fully updated at that time (unwritten extents are not marked as
written) so we cannot read the data back yet.  This design was
dictated by lock ordering as we cannot start a transaction while
PageWriteback bit is set (we could easily deadlock with
ext4_da_writepages()).  But now that we use transaction reservation
for extent conversion, locking issues are solved and we can move
PageWriteback bit clearing after extent conversion is done.  As a
result we can remove wait for unwritten extent conversion from
ext4_sync_file() because it already implicitely happens through
wait_on_page_writeback().

We implement deferring of PageWriteback clearing by queueing completed
bios to appropriate io_end and processing all the pages when io_end is
going to be freed instead of at the moment ext4_io_end() is called.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:23:41 -04:00
Jan Kara
2e8fa54e3b ext4: split extent conversion lists to reserved & unreserved parts
Now that we have extent conversions with reserved transaction, we have
to prevent extent conversions without reserved transaction (from DIO
code) to block these (as that would effectively void any transaction
reservation we did).  So split lists, work items, and work queues to
reserved and unreserved parts.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:21:02 -04:00
Jan Kara
6b523df4fb ext4: use transaction reservation for extent conversion in ext4_end_io
Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed.  However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock).  So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:21:11 -04:00
Jan Kara
3613d22807 ext4: remove buffer_uninit handling
There isn't any need for setting BH_Uninit on buffers anymore.  It was
only used to signal we need to mark io_end as needing extent
conversion in add_bh_to_extent() but now we can mark the io_end
directly when mapping extent.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:19:34 -04:00
Jan Kara
4e7ea81db5 ext4: restructure writeback path
There are two issues with current writeback path in ext4.  For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration.  We always map some
blocks though so we will eventually finish mapping the page.  Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished.  This will be especially
difficult later when io_end will be associated with reserved
transaction handle.

We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 13:17:40 -04:00
Jan Kara
97a851ed71 ext4: use io_end for multiple bios
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.

Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.

CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 11:58:58 -04:00
Linus Torvalds
b973425cbb Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.  Also
 included is a bug fix relating to allocating blocks after resizing an
 ext3 file system when using the ext4 file system driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRkZBlAAoJENNvdpvBGATwLYQP/iWOBs2z93WG23cqkgqvL8o6
 ZyeJdgy9dkFCArVDX5SSnGkJXZ3iqIKi5HoTKTJKfytgMzgiDAZcLsIHVv6NczwR
 UGhjgS3HEdV5tJ46E6JnpB3NLSb+rAdc5kCdlsbzU46CP+JjFiYEhxVpK7ELuM/G
 yctChbIH9FY+1OwxHccacBOaJU2ELhnH6B/8Ry/6gM2H0vfKeTNOdocOHdxvbNqg
 ooGjytMfVopMQEfVG8aXtTfy341NFJH5fAYEahCcXxeO9ta6Unj9yOu5JV2wVrTt
 39+DBsquGX6AVQsc9IxJ6YAN6ldwWN7l3huE9/AI0o/alwGsfVi5M+M/d1MMjDqf
 Fgl2EzzBpZQeKKY9UXNi4LLgYdBiILMgKDOGoRKhRb8ynSSf/JX43+24FvidEi3o
 o//J4aR+oSZfaovGAeikqyF1cumayhoNN8MINRN8igIinBiC4GjBFEl/Kl/1eAY/
 lREGcsmYPXOkVPpM72waRYlP4GwNdOg4QSEY0SGljpwluO+dYtKQjHXcv/s/xL5v
 j3GemzYVyjx4zaq1g3PxGfuD6VKFHr0T6jvzd6cHu17lnPlw9fwznHbEm9BEcXDY
 gbGx9u+a2ZTqDwYVALbeoRpf9Zz6DUCse3ts4N3rbkXUQQiBYo7tybfVopIMAukb
 CexvidDE/ryJrJJFBwoK
 =6cRD
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 update from Ted Ts'o:
 "Fixed regressions (two stability regressions and a performance
  regression) introduced during the 3.10-rc1 merge window.

  Also included is a bug fix relating to allocating blocks after
  resizing an ext3 file system when using the ext4 file system driver"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
  ext4: revert "ext4: use io_end for multiple bios"
  ext4: limit group search loop for non-extent files
  ext4: fix fio regression
2013-05-14 09:30:54 -07:00
Theodore Ts'o
a549984b8c ext4: revert "ext4: use io_end for multiple bios"
This reverts commit 4eec708d26.

Multiple users have reported crashes which is apparently caused by
this commit.  Thanks to Dmitry Monakhov for bisecting it.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
2013-05-11 19:07:42 -04:00
Kent Overstreet
a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Jan Kara
7b001d6a0c ext4: clear buffer_uninit flag when submitting IO
Currently noone cleared buffer_uninit flag. This results in writeback
needlessly marking io_end as needing extent conversion scanning extent
tree for extents to convert. So clear the buffer_uninit flag once the
buffer is submitted for IO and the flag is transformed into
EXT4_IO_END_UNWRITTEN flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-04-12 00:03:19 -04:00
Jan Kara
4eec708d26 ext4: use io_end for multiple bios
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-04-11 23:56:53 -04:00
Jan Kara
0058f9658c ext4: make ext4_bio_write_page() use BH_Async_Write flags
So far ext4_bio_write_page() attached all the pages to ext4_io_end
structure.  This makes that structure pretty heavy (1 KB for pointers
+ 16 bytes per page attached to the bio).  Also later we would like to
share ext4_io_end structure among several bios in case IO to a single
extent needs to be split among several bios and pointing to pages from
ext4_io_end makes this complex.

We remove page pointers from ext4_io_end and use pointers from bio
itself instead.  This isn't as easy when blocksize < pagesize because
then we can have several bios in flight for a single page and we have
to be careful when to call end_page_writeback().  However this is a
known problem already solved by block_write_full_page() /
end_buffer_async_write() so we mimic its behavior here.  We mark
buffers going to disk with BH_Async_Write flag and in
ext4_bio_end_io() we check whether there are any buffers with
BH_Async_Write flag left.  If there are not, we can call
end_page_writeback().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-04-11 23:48:32 -04:00
Theodore Ts'o
1ada47d946 ext4: fix ext4_evict_inode() racing against workqueue processing code
Commit 84c17543ab (ext4: move work from io_end to inode) triggered a
regression when running xfstest #270 when the file system is mounted
with dioread_nolock.

The problem is that after ext4_evict_inode() calls ext4_ioend_wait(),
this guarantees that last io_end structure has been freed, but it does
not guarantee that the workqueue structure, which was moved into the
inode by commit 84c17543ab, is actually finished.  Once
ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this
will allow ext4_ioend_wait() to return on CPU #2, at which point the
evict_inode() codepath can race against the workqueue code on CPU #1
accessing EXT4_I(inode)->i_unwritten_work to find the next item of
work to do.

Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which
will be renamed ext4_ioend_shutdown(), since it is only used by
ext4_evict_inode().  Also, move the call to ext4_ioend_shutdown()
until after truncate_inode_pages() and filemap_write_and_wait() are
called, to make sure all dirty pages have been written back and
flushed from the page cache first.

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e
*pdpt = 0000000030bc3001 *pde = 0000000000000000 
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs
EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0
EIP is at cwq_activate_delayed_work+0x3b/0x7e
EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000
ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000)
Stack:
 f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d
 f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0
 f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000
Call Trace:
 [<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb
 [<c01def1d>] process_one_work+0x5d8/0x637
 [<c040a10b>] ? ext4_end_bio+0x300/0x300
 [<c01e3105>] worker_thread+0x249/0x3ef
 [<c01ea317>] kthread+0xd8/0xeb
 [<c01e2ebc>] ? manage_workers+0x4bb/0x4bb
 [<c023a370>] ? trace_hardirqs_on+0x27/0x37
 [<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28
 [<c01ea23f>] ? __init_kthread_worker+0x71/0x71
Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1
 6c c1 00 31 c9 83
EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84
CR2: 0000000000000000
---[ end trace a1923229da53d8a4 ]---

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
2013-03-20 09:39:42 -04:00
Jan Kara
091e26dfc1 ext4: fix possible use-after-free with AIO
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

CC: stable@vger.kernel.org
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-29 22:48:17 -05:00
Lukas Czerner
cfa7275482 ext4: remove unused variable flags
Remove unused variable flags from dump_completed_IO(). The code is
only exercised when EXT4FS_DEBUG is defined.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-01-28 21:14:11 -05:00
Jan Kara
8a850c3fb8 ext4: Make ext4_bio_writepage() handle unprepared buffers
So far ext4_bio_writepage() unconditionally cleared dirty bit on all
buffers underlying the page. That implicitely assumes we can write all
buffers. So far that is true because callers call into
ext4_bio_writepage() make sure all buffers in the page are mapped but:

a) it's a data corruption bug waiting to happen
b) in data=ordered mode when blocksize < pagesize we do need to write
   pages that may have only some of dirty buffers mapped.

So change ext4_bio_writepage() to skip buffers that cannot be written without
clearing their dirty bit.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-28 20:53:28 -05:00
Jan Kara
002bd7fa3a ext4: simplify list handling in ext4_do_flush_completed_IO()
The function splices i_completed_io_list to its private list
first.  From that moment on we don't need any lock for working with
io_end structures because all io_end structure on the list are only
our own. So we can remove the other two lists in the function and free
io_end immediately after we are done with it.

CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-28 09:49:15 -05:00
Jan Kara
84c17543ab ext4: move work from io_end to inode
It does not make much sense to have struct work in ext4_io_end_t
because we always use it for only one ext4_io_end_t per inode (the
first one in the i_completed_io list). So just move the structure to
inode itself.  This also allows for a small simplification in
processing io_end structures.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-28 09:43:46 -05:00
Jan Kara
1ae48a6354 ext4: use redirty_page_for_writepage() in ext4_bio_write_page()
When we cannot write a page we should use redirty_page_for_writepage()
instead of plain set_page_dirty(). That tells writeback code we have
problems, redirties only the page (redirtying buffers is not needed),
and updates mm accounting of failed page writes.

Also move clearing of buffer dirty flag after io_submit_add_bh(). At that
moment we are sure buffer will be going to disk.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-28 09:32:54 -05:00
Jan Kara
36ade451a5 ext4: Always use ext4_bio_write_page() for writeout
Currently we sometimes used block_write_full_page() and sometimes
ext4_bio_write_page() for writeback (depending on mount options and call
path). Let's always use ext4_bio_write_page() to simplify things a bit.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-28 09:30:52 -05:00
Theodore Ts'o
4a092d7379 ext4: rationalize ext4_extents.h inclusion
Previously, ext4_extents.h was being included at the end of ext4.h,
which was bad for a number of reasons: (a) it was not being included
in the expected place, and (b) it caused the header to be included
multiple times.  There were #ifdef's to prevent this from causing any
problems, but it still was unnecessary.

By moving the function declarations that were in ext4_extents.h to
ext4.h, which is standard practice for where the function declarations
for the rest of ext4.h can be found, we can remove ext4_extents.h from
being included in ext4.h at all, and then we can only include
ext4_extents.h where it is needed in ext4's source files.

It should be possible to move a few more things into ext4.h, and
further reduce the number of source files that need to #include
ext4_extents.h, but that's a cleanup for another day.

Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Reported-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-28 13:03:30 -05:00
Anatol Pomozov
8d8c182570 ext4: use 'inode' variable that is already dereferenced
Tested: xfs tests

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08 14:53:35 -05:00
Dmitry Monakhov
c278531d39 ext4: fix ext4_flush_completed_IO wait semantics
BUG #1) All places where we call ext4_flush_completed_IO are broken
    because buffered io and DIO/AIO goes through three stages
    1) submitted io,
    2) completed io (in i_completed_io_list) conversion pended
    3) finished  io (conversion done)
    And by calling ext4_flush_completed_IO we will flush only
    requests which were in (2) stage, which is wrong because:
     1) punch_hole and truncate _must_ wait for all outstanding unwritten io
      regardless to it's state.
     2) fsync and nolock_dio_read should also wait because there is
        a time window between end_page_writeback() and ext4_add_complete_io()
        As result integrity fsync is broken in case of buffered write
        to fallocated region:
        fsync                                      blkdev_completion
	 ->filemap_write_and_wait_range
                                                   ->ext4_end_bio
                                                     ->end_page_writeback
          <-- filemap_write_and_wait_range return
	 ->ext4_flush_completed_IO
   	 sees empty i_completed_io_list but pended
   	 conversion still exist
                                                     ->ext4_add_complete_io

BUG #2) Race window becomes wider due to the 'ext4: completed_io
locking cleanup V4' patch series

This patch make following changes:
1) ext4_flush_completed_io() now first try to flush completed io and when
   wait for any outstanding unwritten io via ext4_unwritten_wait()
2) Rename function to more appropriate name.
3) Assert that all callers of ext4_flush_unwritten_io should hold i_mutex to
   prevent endless wait

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2012-10-05 11:31:55 -04:00
Dmitry Monakhov
28a535f9a0 ext4: completed_io locking cleanup
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
  My diagnosis:
  We already protect extent tree with i_data_sem, truncate and punch_hole
  should wait for DIO, so the only data we have to protect is end_io->flags
  modification, but only flush_completed_IO and end_io_work modified this
  flags and we can serialize them via i_completed_io_lock.

  Currently all these games with mutex_trylock result in the following deadlock
   truncate:                          kworker:
    ext4_setattr                       ext4_end_io_work
    mutex_lock(i_mutex)
    inode_dio_wait(inode)  ->BLOCK
                             DEADLOCK<- mutex_trylock()
                                        inode_dio_done()
  #TEST_CASE1_BEGIN
  MNT=/mnt_scrach
  unlink $MNT/file
  fallocate -l $((1024*1024*1024)) $MNT/file
  aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
  sleep 2
  truncate -s 0 $MNT/file
  #TEST_CASE1_END

Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286

This patch makes state machine simple and clean:

(1) xxx_end_io schedule final extent conversion simply by calling
    ext4_add_complete_io(), which append it to ei->i_completed_io_list
    NOTE1: because of (2A) work should be queued only if
    ->i_completed_io_list was empty, otherwise the work is scheduled already.

(2) ext4_flush_completed_IO is responsible for handling all pending
    end_io from ei->i_completed_io_list
    Flushing sequence consists of following stages:
    A) LOCKED: Atomically drain completed_io_list to local_list
    B) Perform extents conversion
    C) LOCKED: move converted io's to to_free list for final deletion
       	     This logic depends on context which we was called from.
    D) Final end_io context destruction
    NOTE1: i_mutex is no longer required because end_io->flags modification
    is protected by ei->ext4_complete_io_lock

Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
  logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
  protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
  not good idea to punch blocks from corrupted inode.

Changes since V3 (in request to Jan's comments):
  Fall back to active flush_completed_IO() approach in order to prevent
  performance issues with nolocked DIO reads.
Changes since V2:
  Fix use-after-free caused by race truncate vs end_io_work

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:14:55 -04:00
Dmitry Monakhov
82e5422911 ext4: fix unwritten counter leakage
ext4_set_io_unwritten_flag() will increment i_unwritten counter, so
once we mark end_io with EXT4_END_IO_UNWRITTEN we have to revert it back
on error path.

 - add missed error checks to prevent counter leakage
 - ext4_end_io_nolock() will clear EXT4_END_IO_UNWRITTEN flag to signal
   that conversion finished.
 - add BUG_ON to ext4_free_end_io() to prevent similar leakage in future.

Visible effect of this bug is that unaligned aio_stress may deadlock

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28 23:36:25 -04:00
Dmitry Monakhov
e27f41e1b7 ext4: give i_aiodio_unwritten a more appropriate name
AIO/DIO prefix is wrong because it account unwritten extents which
also may be scheduled from buffered write endio

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28 23:24:52 -04:00
Linus Torvalds
6268b325c3 Revert "ext4: don't release page refs in ext4_end_bio()"
This reverts commit b43d17f319.

Dave Jones reports that it causes lockups on his laptop, and his debug
output showed a lot of processes hung waiting for page_writeback (or
more commonly - processes hung waiting for a lock that was held during
that writeback wait).

The page_writeback hint made Ted suggest that Dave look at this commit,
and Dave verified that reverting it makes his problems go away.

Ted says:
 "That commit fixes a race which is seen when you write into fallocated
  (and hence uninitialized) disk blocks under *very* heavy memory
  pressure.  Furthermore, although theoretically it could trigger under
  normal direct I/O writes, it only seems to trigger if you are issuing
  a huge number of AIO writes, such that a just-written page can get
  evicted from memory, and then read back into memory, before the
  workqueue has a chance to update the extent tree.

  This race has been around for a little over a year, and no one noticed
  until two months ago; it only happens under fairly exotic conditions,
  and in fact even after trying very hard to create a simple repro under
  lab conditions, we could only reproduce the problem and confirm the
  fix on production servers running MySQL on very fast PCIe-attached
  flash devices.

  Given that Dave was able to hit this problem pretty quickly, if we
  confirm that this commit is at fault, the only reasonable thing to do
  is to revert it IMO."

Reported-and-tested-by: Dave Jones <davej@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-29 17:00:56 -07:00
Curt Wohlgemuth
b43d17f319 ext4: don't release page refs in ext4_end_bio()
We can clear PageWriteback on each page when the IO
completes, but we can't release the references on the page
until we convert any uninitialized extents.

Without this patch, the use of the dioread_nolock mount
option can break buffered writes, because extents may
not be converted by the time a subsequent buffered read
comes in; if the page is not in the page cache, a read
will return zeros if the extent is still uninitialized.

I tested this with a (temporary) patch that adds a call
to msleep(1000) at the start of ext4_end_io_work(), to delay
processing of each DIO-unwritten work queue item.  With this
msleep(), a simple workload of

  fallocate
  write
  fadvise
  read

will fail without this patch, succeeds with it.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-05 10:40:15 -05:00
Jeff Moyer
491caa4363 ext4: fix race between sync and completed io work
The following command line will leave the aio-stress process unkillable
on an ext4 file system (in my case, mounted on /mnt/test):

aio-stress -t 20 -s 10 -O -S -o 2 -I 1000 /mnt/test/aiostress.3561.4 /mnt/test/aiostress.3561.4.20 /mnt/test/aiostress.3561.4.19 /mnt/test/aiostress.3561.4.18 /mnt/test/aiostress.3561.4.17 /mnt/test/aiostress.3561.4.16 /mnt/test/aiostress.3561.4.15 /mnt/test/aiostress.3561.4.14 /mnt/test/aiostress.3561.4.13 /mnt/test/aiostress.3561.4.12 /mnt/test/aiostress.3561.4.11 /mnt/test/aiostress.3561.4.10 /mnt/test/aiostress.3561.4.9 /mnt/test/aiostress.3561.4.8 /mnt/test/aiostress.3561.4.7 /mnt/test/aiostress.3561.4.6 /mnt/test/aiostress.3561.4.5 /mnt/test/aiostress.3561.4.4 /mnt/test/aiostress.3561.4.3 /mnt/test/aiostress.3561.4.2

This is using the aio-stress program from the xfstests test suite.
That particular command line tells aio-stress to do random writes to
20 files from 20 threads (one thread per file).  The files are NOT
preallocated, so you will get writes to random offsets within the
file, thus creating holes and extending i_size.  It also opens the
file with O_DIRECT and O_SYNC.

On to the problem.  When an I/O requires unwritten extent conversion,
it is queued onto the completed_io_list for the ext4 inode.  Two code
paths will pull work items from this list.  The first is the
ext4_end_io_work routine, and the second is ext4_flush_completed_IO,
which is called via the fsync path (and O_SYNC handling, as well).
There are two issues I've found in these code paths.  First, if the
fsync path beats the work routine to a particular I/O, the work
routine will free the io_end structure!  It does not take into account
the fact that the io_end may still be in use by the fsync path.  I've
fixed this issue by adding yet another IO_END flag, indicating that
the io_end is being processed by the fsync path.

The second problem is that the work routine will make an assignment to
io->flag outside of the lock.  I have witnessed this result in a hang
at umount.  Moving the flag setting inside the lock resolved that
problem.

The problem was introduced by commit b82e384c7b ("ext4: optimize
locking for end_io extent conversion"), which first appeared in 3.2.
As such, the fix should be backported to that release (probably along
with the unwritten extent conversion race fix).

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
CC: stable@kernel.org
2012-03-05 10:29:52 -05:00
Jeff Moyer
266991b138 ext4: fix race between unwritten extent conversion and truncate
The following comment in ext4_end_io_dio caught my attention:

	/* XXX: probably should move into the real I/O completion handler */
        inode_dio_done(inode);

The truncate code takes i_mutex, then calls inode_dio_wait.  Because the
ext4 code path above will end up dropping the mutex before it is
reacquired by the worker thread that does the extent conversion, it
seems to me that the truncate can happen out of order.  Jan Kara
mentioned that this might result in error messages in the system logs,
but that should be the extent of the "damage."

The fix is pretty straight-forward: don't call inode_dio_done until the
extent conversion is complete.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-02-20 17:59:24 -05:00
Linus Torvalds
ac69e09280 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2/3/4: delete unneeded includes of module.h
  ext{3,4}: Fix potential race when setversion ioctl updates inode
  udf: Mark LVID buffer as uptodate before marking it dirty
  ext3: Don't warn from writepage when readonly inode is spotted after error
  jbd: Remove j_barrier mutex
  reiserfs: Force inode evictions before umount to avoid crash
  reiserfs: Fix quota mount option parsing
  udf: Treat symlink component of type 2 as /
  udf: Fix deadlock when converting file from in-ICB one to normal one
  udf: Cleanup calling convention of inode_getblk()
  ext2: Fix error handling on inode bitmap corruption
  ext3: Fix error handling on inode bitmap corruption
  ext3: replace ll_rw_block with other functions
  ext3: NULL dereference in ext3_evict_inode()
  jbd: clear revoked flag on buffers before a new transaction started
  ext3: call ext3_mark_recovery_complete() when recovery is really needed
2012-01-09 12:51:21 -08:00
Paul Gortmaker
302bf2f325 ext2/3/4: delete unneeded includes of module.h
Delete any instances of include module.h that were not strictly
required.  In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09 13:52:10 +01:00
Yongqiang Yang
5a0dc7365c ext4: handle EOF correctly in ext4_bio_write_page()
We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-12-13 22:29:12 -05:00
Tao Ma
0edeb71dc9 ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.

We have found some bugs that the flag is set while leaving
i_aiodio_unwritten unchanged(commit 32c80b32c0). So this patch just tries
to create a helper function to wrap them to avoid any future bug.
The idea is inspired by Eric.

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 17:30:44 -04:00
Theodore Ts'o
b82e384c7b ext4: optimize locking for end_io extent conversion
Now that we are doing the locking correctly, we need to grab the
i_completed_io_lock() twice per end_io.  We can clean this up by
removing the structure from the i_complted_io_list, and use this as
the locking mechanism to prevent ext4_flush_completed_IO() racing
against ext4_end_io_work(), instead of clearing the
EXT4_IO_END_UNWRITTEN in io->flag.

In addition, if the ext4_convert_unwritten_extents() returns an error,
we no longer keep the end_io structure on the linked list.  This
doesn't help, because it tends to lock up the file system and wedges
the system.  That's one way to call attention to the problem, but it
doesn't help the overall robustness of the system.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 10:56:32 -04:00
Theodore Ts'o
4e29802121 ext4: remove unnecessary call to waitqueue_active()
The usage of waitqueue_active() is not necessary, and introduces (I
believe) a hard-to-hit race.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-30 18:41:19 -04:00
Tao Ma
d73d5046a7 ext4: Use correct locking for ext4_end_io_nolock()
We must hold i_completed_io_lock when manipulating anything on the
i_completed_io_list linked list.  This includes io->lock, which we
were checking in ext4_end_io_nolock().

So move this check to ext4_end_io_work().  This also has the bonus of
avoiding extra work if it is already done without needing to take the
mutex.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-30 18:26:08 -04:00
Jiaying Zhang
8c0bec2151 ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complaining
The i_mutex lock and flush_completed_IO() added by commit 2581fdc810
in ext4_evict_inode() causes lockdep complaining about potential
deadlock in several places.  In most/all of these LOCKDEP complaints
it looks like it's a false positive, since many of the potential
circular locking cases can't take place by the time the
ext4_evict_inode() is called; but since at the very least it may mask
real problems, we need to address this.

This change removes the flush_completed_IO() and i_mutex lock in
ext4_evict_inode().  Instead, we take a different approach to resolve
the software lockup that commit 2581fdc810 intends to fix.  Rather
than having ext4-dio-unwritten thread wait for grabing the i_mutex
lock of an inode, we use mutex_trylock() instead, and simply requeue
the work item if we fail to grab the inode's i_mutex lock.

This should speed up work queue processing in general and also
prevents the following deadlock scenario: During page fault,
shrink_icache_memory is called that in turn evicts another inode B.
Inode B has some pending io_end work so it calls ext4_ioend_wait()
that waits for inode B's i_ioend_count to become zero.  However, inode
B's ioend work was queued behind some of inode A's ioend work on the
same cpu's ext4-dio-unwritten workqueue.  As the ext4-dio-unwritten
thread on that cpu is processing inode A's ioend work, it tries to
grab inode A's i_mutex lock.  Since the i_mutex lock of inode A is
still hold before the page fault happened, we enter a deadlock.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-08-31 11:50:51 -04:00
Tao Ma
32c80b32c0 ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.

We don't increase i_aiodio_unwritten when setting
EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process
to wait forever.

Part of the patch came from Eric in his e-mail, but it doesn't fix the
problem met by Michael actually.

http://marc.info/?l=linux-ext4&m=131316851417460&w=2

Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-08-13 12:30:59 -04:00
Theodore Ts'o
275d3ba6b4 ext4: remove loop around bio_alloc()
These days, bio_alloc() is guaranteed to never fail (as long as nvecs
is less than BIO_MAX_PAGES), so we don't need the loop around the
struct bio allocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-29 21:44:45 -04:00
Curt Wohlgemuth
39db00f1c4 ext4: don't set PageUptodate in ext4_end_bio()
In the bio completion routine, we should not be setting
PageUptodate at all -- it's set at sys_write() time, and is
unaffected by success/failure of the write to disk.

This can cause a page corruption bug when the file system's
block size is less than the architecture's VM page size.

if we have only written a single block -- we might end up
setting the page's PageUptodate flag, indicating that page
is completely read into memory, which may not be true.
This could cause subsequent reads to get bad data.

This commit also takes the opportunity to clean up error
handling in ext4_end_bio(), and remove some extraneous code:

   - fixes ext4_end_bio() to set AS_EIO in the
     page->mapping->flags on error, which was left out by
     mistake.  This is needed so that fsync() will
     return an error if there was an I/O error.
   - remove the clear_buffer_dirty() call on unmapped
     buffers for each page.
   - consolidate page/buffer error handling in a single
     section.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jim Meyering <jim@meyering.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Mingming Cao <cmm@us.ibm.com>
2011-04-30 13:26:26 -04:00
Linus Torvalds
ae005cbed1 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
  ext4: fix a BUG in mb_mark_used during trim.
  ext4: unused variables cleanup in fs/ext4/extents.c
  ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
  ext4: add more tracepoints and use dev_t in the trace buffer
  ext4: don't kfree uninitialized s_group_info members
  ext4: add missing space in printk's in __ext4_grp_locked_error()
  ext4: add FITRIM to compat_ioctl.
  ext4: handle errors in ext4_clear_blocks()
  ext4: unify the ext4_handle_release_buffer() api
  ext4: handle errors in ext4_rename
  jbd2: add COW fields to struct jbd2_journal_handle
  jbd2: add the b_cow_tid field to journal_head struct
  ext4: Initialize fsync transaction ids in ext4_new_inode()
  ext4: Use single thread to perform DIO unwritten convertion
  ext4: optimize ext4_bio_write_page() when no extent conversion is needed
  ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
  ext4: use the nblocks arg to ext4_truncate_restart_trans()
  ext4: fix missing iput of root inode for some mount error paths
  ext4: make FIEMAP and delayed allocation play well together
  ext4: suppress verbose debugging information if malloc-debug is off
  ...

Fi up conflicts in fs/ext4/super.c due to workqueue changes
2011-03-25 09:57:41 -07:00
Jens Axboe
721a9602e6 block: kill off REQ_UNPLUG
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00