wr_ctrl waiters are none interruptible, so should be waken up
with call to wake_up and not to wake_up_interruptible.
This fixes commit:
7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The control messages are usually small, around 8 bytes, and can be
allocated on the stack.
Using on stack allocation allows us to drop 'wr_msg' a rather large
buffer reserved in the mei_dev structure and relax contention
of this device global buffer.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that mei_cl_read_start is called under the device lock
also in the bus layer. The function updates global ctrl_wr_list
which should be locked.
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A control message reply may not be received if either a link reset has
occurred or disconnection is initiated by the FW.
In the both cases the client state will be set straight to DISCONNECTED
and the driver will wait till timeout.
Adding DISCONNECTED state in the waiting condition will release the
client from the stall.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Timeout on notify request is not a fatal condition, and actually
cleaning control queues will disrupt other control flows of the
same client.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a message is received and amthif client is not in reading state
the message is ignored and left dangling in the queue. This may happen
after one of the amthif host connections is closed w/o completing the
reading. Another client will pick up a wrong message on next read
attempt which will lead to link reset.
To prevent this the driver has to properly discard the message when
amthif client is not in reading state.
Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case when disconnection is initiated from the FW
the driver is flushing items from the write control list while
iterating over it:
mei_irq_write_handler()
list_for_each_entry_safe(ctrl_wr_list) <-- outer loop
mei_cl_irq_disconnect_rsp()
mei_cl_set_disconnected()
mei_io_list_flush(ctrl_wr_list) <-- destorying list
We move the list flushing to the completion routine.
Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Global me_client_index is used only during the enumeration process and
can be effectively replaced by me_addr data from the last enumeration
response as we always enumerate clients in the increasing order.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If cldrv->probe() failed in mei_cl_device_probe(),
the mei module is left pinned.
The patch moves __module_get(THIS_MODULE) after cldrv->probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no reason to duplicate the logic provided by scnprintf().
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
buf_idx type was changed to size_t, and few places
missed out to change the print format from %ld to %zu.
Use also uz for buf.size which is also of size_t
Fixes:
commit 56988f22e097 ("mei: fix possible integer overflow issue")'
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix double freeing of the cb that can happen if link reset kicks in the
middle of blocked write from a device on the cl bus.
Free cb inside mei_cl_write function on failure and drop cb free
operation from callers, during a link reset the mei_cl_write function
returns with an error, but the caller doesn't know if the cb was
already queued or not so it doesn't know if the cb will be freed upon
queue reclaim or it has to free it itself.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file wd.c was remove from the driver by commit
commit fdd9b86559 ("mei: wd: drop the watchdog code from the core mei
driver")
Unfortunately it came back by mistake in rebasing in the commit
commit 06ee536bcb ("mei: fill file pointer in read cb for fixed
address client")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The amthif FW client can appear after the end of client enumeration.
Amthif host client initialization is done now at FW client discovery
time.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signal the FW that it can send an HBM enumeration answer immediately,
without waiting for FW initialization completion, meaning before
all the FW clients are ready and registered.
Organize enumeration response options to enum as a byproduct.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since clients can be now added and removed during runtime
we need to run bus rescan whenever me_clients list is modified.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reserved host clients can be obsoleted now, a portion of the
platforms is shipped without iAMT enabled, where the reservation is not
relevant and for platforms with iAMT dynamic allocation is sufficient.
Dropping reserved ids makes enumeration more flexible and generic
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FW can initiate client disconnection only because an error
condition, hence it make sense to bump the debug message to the warning
level to have an entery in the log.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable by default connection to fixed address clients
from user-space for skylake and newer platform.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The read callback created from a flow control request for
a fixed address client have NULL in the file pointer.
Fill the file pointer using a data from a write callback.
This allows us to drop workaround introduced in:
commit eeabfcf5a9 ("mei: connection to fixed address clients from user-space")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A fixed address client in the FW doesn't have a notion of connection and
can send message after the file associated with it was already closed.
Silently discard such messages.
Add inline helpers to detect whether a message is hbm or intended for
a fixed address client
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean write and write_waiting queues in disconnect.
Requests in those queues are stale and processing will lead to
fat warnings.
In multi thread operations on disconnect and in FW disconnect case -
write/read/event waiters should end wait and return error.
Wake all waiters for disconnecting client to achieve that.
Drop wake all and write queue clean on reset,
as now we waking all waiters and cleaning write queues on disconnect.
No need to do it twice.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of link reset all blocked writes should be interrupted.
Note, that currently blocking write is used only through bus layer.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bus data transfer interface was missing the check if the device is
in enabled state, this may lead to stack corruption during link reset.
Cc: <stable@vger.kernel.org> #4.0
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call wake_up cl->ev_wait only in case there is no bus client registered
to the event notification.
Second, since we don't have exclusive waiter wake_up_interruptible_all
is not used correctly here.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this particular case this more correct and safer to check if the RX
event is set in the event mask rather than query waitqueue_active
Since the check is already performed in the mei_cl_bus_rx_event
function, it is just required to check for its return value.
Second, since we don't have exclusive waiter wake_up_interruptible_all
is not used correctly here.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of link reset all waiting readers should be interrupted.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch using cl->rx_wait wait queue also for amthif, there is nothing
special about amthif in that matter in Rx flow.
The cl->wait is reserved for hbm flows and asynchronous events
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove duplicated parameter validation from mei_amthif_write functions,
The parameter check is already performed by the caller function
mei_write
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now when we have per client rd_completed list we can remove
the amthif specific amthif_rd_complete_list.
In addition in the function mei_amthif_read do not loop over the
rd_completed list like the original code as the code path is unlocked.
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A next amthif write can be executed only after the previous one has
completed.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses three names file, fp, and file_object for
struct file type. To improve code clarity and adjust to my taste
rename file_object to more common and shorter fp.
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct file file pointer is used as an opaque handle to for a
connected client, for this part the pointer should be immutable and
should be set to count.
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver now uses a list for storing read packets instead of
single variable a pending read is no longer blocking other connections.
A pending read will be discarded up the file closure.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If empty message come from FW (buf_idx == 0) then the current code will
still try to copy data from not filled buffer to the user-space,
instead the code should behave the same as when end of a message
has been reached, clean resources and return 0
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If registering of character device failed stop the device properly.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possible integer overflow following by a buffer overflow
when accumulating messages coming from the FW to compose a full payload.
Occurrence of wrap around has to be prevented for next message size
calculation.
For unsigned integer the addition overflow has occurred when the
result is smaller than one of the arguments.
To simplify the fix, the types of buf.size and buf_idx are set to the
same width, namely size_t also to be aligned with the type of length
parameter in file read/write ops.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HBM features list is ready while sending enumerate request and
enumerating clients, output it to debugfs in these states too.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of many active host clients clients (41 and more) 1K buffer
is not enough for full information print.
Calculate buffer size according to real clients number.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use tracing events also for reading and writing pci configuration space
<debugfs>/tracing/events/mei/mei_pci_reg_{read,write}
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch address a possible security issue:
The request field in client notify request ioctl comes from user space
as u32 and is downcasted to u8 with out validation.
Check request field to have approved values
MEI_HBM_NOTIFICATION_STAR/STOP
Cc: <stable@vger.kernel.org> #4.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The iAMT WD client has to be whitelisted sice it has two connections
and is filtered out by number_of_connections fixup.
Also the API has changed for BDW and SKL but firmware haven't updated
the protocol version.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of integrating the iAMT watchdog in the mei core driver
we will create a watchdog device on the mei client bus and
create a driver for it.
This patch removes the watchdog code from the mei core driver.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We left few function prototypes in the header file after
moving nfc logic to bus.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy completed callback content to the user space
if we have such callback ready in the beginning of the read.
Simplify offset processing logic as byproduct.
This is a refinement for:
commit 139aacf757 ("mei: fix read after read scenario")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MEI FW can receive only one flow control for read.
Currently the driver only checks if a flow control credit was already
sent and read is pending in the rd_pending queue, but it also has to
check if flow control credit already queued in the write control queue
to prevent sending more than one flow control credits.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
