This patch set reorganises and fixes device and codec level probe/remove
handling within the driver, to allow clean probe and remove at the codec level.
This set relates to an issue raised by Yong Zhi where a codec level re-probe
would fail due to clks still being registered from the previous instantiation.
In addition some improvements around regulator handling and soft reset have
also been included.
Adam Thomson (3):
ASoC: da7219: Move required devm_* allocations to device level code
ASoC: da7219: Move soft reset handling to codec level probe
ASoC: da7219: Fix clock handling around codec level probe
sound/soc/codecs/da7219-aad.c | 85 +++++---
sound/soc/codecs/da7219-aad.h | 3 +
sound/soc/codecs/da7219.c | 493 +++++++++++++++++++++++-------------------
sound/soc/codecs/da7219.h | 1 +
4 files changed, 328 insertions(+), 254 deletions(-)
--
1.9.1
This patch series enables some features on the tlv3204 codec and also fixes some issues faced while testing
v2: Fixed the build error from snd_soc_component_read32
v1: initial ASoC: codec: tlv3204: Codec workaround series
Michael Sit Wei Hong (3):
ASoC: codec: tlv3204: Enable 24 bit audio support
ASoC: codec: tlv3204: Increased maximum supported channels
ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset
sound/soc/codecs/tlv320aic32x4.c | 60 +++++++++++++++++++++++---------
1 file changed, 44 insertions(+), 16 deletions(-)
--
2.17.1
This series performs some minor cleanup on the driver for the analog
codec in the Allwinner A64, and hooks up the existing mute switches to
DAPM widgets, in order to provide improved power management.
Changes since v1:
- Collected Acked-by/Reviewed-by tags
- Used SOC_MIXER_NAMED_CTL_ARRAY to avoid naming a widget "Earpiece"
Samuel Holland (8):
ASoC: sun50i-codec-analog: Fix duplicate use of ADC enable bits
ASoC: sun50i-codec-analog: Gate the amplifier clock during suspend
ASoC: sun50i-codec-analog: Group and sort mixer routes
ASoC: sun50i-codec-analog: Make headphone routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for headphone switch
ASoC: sun50i-codec-analog: Make line out routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for line out switch
ASoC: sun50i-codec-analog: Enable DAPM for earpiece switch
sound/soc/sunxi/sun50i-codec-analog.c | 176 ++++++++++++++++----------
1 file changed, 111 insertions(+), 65 deletions(-)
--
2.26.2
This series fixes a couple of issues with the digital audio codec in the
Allwinner A64 SoC:
1) Left/right channels were swapped when playing/recording audio
2) DAPM topology was wrong, breaking some kcontrols
This is the minimum set of changes necessary to fix these issues in a
backward-compatible way. For that reason, some DAPM widgets still have
incorrect or confusing names; those and other issues will be fixed in
later patch sets.
Samuel Holland (7):
ASoC: dt-bindings: Add a new compatible for the A64 codec
ASoC: sun8i-codec: Fix DAPM to match the hardware topology
ASoC: sun8i-codec: Add missing mixer routes
ASoC: sun8i-codec: Add a quirk for LRCK inversion
ARM: dts: sun8i: a33: Update codec widget names
arm64: dts: allwinner: a64: Update codec widget names
arm64: dts: allwinner: a64: Update the audio codec compatible
.../sound/allwinner,sun8i-a33-codec.yaml | 6 +-
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 8 +-
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinebook.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 8 +-
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 8 +-
.../allwinner/sun50i-a64-sopine-baseboard.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 8 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +-
sound/soc/sunxi/sun8i-codec.c | 137 ++++++++++++++----
13 files changed, 155 insertions(+), 71 deletions(-)
--
2.26.2
This patch series drops a printk message down to dev_dbg() because it
was noisy and then migrates this driver to use clk_hw based APIs instead
of clk based APIs because this device is a clk provider, not a clk
consumer. I've only lightly tested the last two patches but I don't have
all combinations of clks for this device.
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Stephen Boyd (3):
ASoC: rt5682: Use dev_dbg() in rt5682_clk_check()
ASoC: rt5682: Drop usage of __clk_get_name()
ASoC: rt5682: Use clk_hw based APIs for registration
sound/soc/codecs/rt5682.c | 73 ++++++++++++---------------------------
sound/soc/codecs/rt5682.h | 2 --
2 files changed, 23 insertions(+), 52 deletions(-)
Based on the last patch to this driver in linux-next.
base-commit: 6301adf942
--
Sent by a computer, using git, on the internet
On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
with the mclk of codec, then the clock rate is also different.
So it is better to get clock rate of "extal" rate by clk_get_rate,
don't reuse the clock rate of mclk.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1597047103-6863-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently list of Qualcomm drivers is growing, so put them in to a
proper menu so that it does not mix up with other ASOC configs in menuconfig.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811105818.7890-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows solutions like ALSA UCM to utilize hardware mono downmix
for cases where mono output to a single speaker is desired only in
specific situations (like on a mobile phone).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/3662154.EqNIRYjrc8@pliszka
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a couple of occurrences of "the the" in the Kconfig
text. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20200817224706.6139-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the repeated words {that, the} in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200808012156.10827-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow recommendation in Documentation/scheduler/completion.rst and
use macro to declare local 'struct completion'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200813175442.59067-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new common snd_soc_of_parse_aux_devs() helper function
to parse auxiliary devices from the device tree. The new helper
is just a copy of meson_card_add_aux_devices() so there is no
functional change.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200801100257.22658-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new common snd_soc_of_parse_aux_devs() helper function
to parse auxiliary devices from the device tree. The code is slightly
different but the binding that is parsed is exactly the same.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200801100257.22658-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card.c and meson-card-utils.c use pretty much the same
helper function to parse auxiliary devices from the device tree.
Make it easier for other drivers to parse these from the device tree
as well by adding a shared helper function to soc-core.c.
snd_soc_of_parse_aux_devs() is pretty much a copy of
meson_card_add_aux_devices() from meson-card-utils.c
with two minor changes:
- Make property name configurable as parameter
- Change dev_err() message slightly for consistency with other
error messages in soc-core.c
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200801100257.22658-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
"AVDD" is for analog power supply, "DVDD" is for digital power
supply, they can improve the power management.
As the regulator is enabled in pm runtime resume, which is
behind the component driver probe, so accessing registers in
component driver probe will fail. Fix this issue by enabling
regcache_cache_only after pm_runtime_enable.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1597397561-2426-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an binary mixer 'ELD' to each HDMI PCM device so user space
could read the ELD data of external HDMI display.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20200818004413.12852-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-topology.c:2879:29: style: Variable
'block_size' is assigned a value that is never used. [unreadVariable]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains about possible NULL pointer dereferences but the
assignments are actually not needed before walking through lists.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-sst-utils.c:240:10: style: Variable 'ret'
is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-sst-cldma.c:248:10: style: Variable 'ret'
is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/skylake/skl-nhlt.c:203:21: style: Variable 'rate' is
assigned a value that is never used. [unreadVariable]
unsigned long rate = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/haswell/sst-haswell-ipc.c:430:8: style: Variable 'i'
is assigned a value that is never used. [unreadVariable]
sound/soc/intel/haswell/sst-haswell-ipc.c:1792:8: style: Variable 'id'
is assigned a value that is never used. [unreadVariable]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst/sst_loader.c:401:43: style: Redundant
condition: If 'EXPR == 4', the comparison 'EXPR != 3' is always
true. [redundantCondition]
if (sst_drv_ctx->sst_state != SST_RESET ||
^
In this case, if sst_state == SST_SHUTDOWN then the first test is
already true. 2014 bug, yay.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst/sst.c:52:20: style: Variable 'size' is
assigned a value that is never used. [unreadVariable]
unsigned int size = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning
return ret_val;
^
sound/soc/intel/atom/sst-mfld-platform-pcm.c:384:6: note: If condition 'ret_val' is true, the function will return/exit
if (ret_val)
^
sound/soc/intel/atom/sst-mfld-platform-pcm.c:387:9: note: Returning identical expression 'ret_val'
return ret_val;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/atom/sst/sst.c:427:13: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int i, ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/atom/sst/sst.c:373:2: warning: Assignment of function
parameter has no effect outside the function. Did you forget
dereferencing it? [uselessAssignmentPtrArg]
ctx = NULL;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/intel/atom/sst-mfld-platform-compress.c:46:14: style:
Variable 'ret_val' is assigned a value that is never
used. [unreadVariable]
int ret_val = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains of a possible NULL pointer dereference but setting
a pointer before using list_for_each_entry() is not useful.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813200147.61990-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously the driver would use devm_* related functions at
the codec level probe() to allocate clock resources for MCLK
and the DAI clocks exposed by the device. This caused issues
when registering clocks on a re-probe (no device level
remove/prove involved) as the devm_* resources were never
freed up so the clocks were still registered from the previous
codec level probe().
This commit updates the clock handling for MCLK usage and DAI
clock provision to fix this discrepancy and allow the codec level
probe/remove functionality to operate as intended.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/b92c461baeed27a6cd92e59e36a55c2547218683.1597164865.git.Adam.Thomson.Opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the reorganisation of the device level and codec
level probe functionlity, the soft reset handling should really
reside at the codec level and after the instantiation of supplies.
This commit makes the relevant changes to support this change of
scope including the remove of devm_* functions being called for
regulator instantiation at the codec level.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/f7603a4855647429b754ce76f887ec441622015c.1597164865.git.Adam.Thomson.Opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During gapless playback, its possible for previous track to
end at unaligned boundary, starting next track on the same
boundary can lead to unaligned address exception in dsp.
So implement copy callback for finer control on the buffer offsets.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-11-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to gapless playback by implementing metadata,
next_track, drain and partial drain support.
Gapless on Q6ASM is implemented by opening 2 streams in a single
q6asm stream and toggling them on next track.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
rearrange code so that it will be easy to change the codec
profile at runtime. This means moving exiting set_params
to an internal wrapper which can be called when codec
profile changes.
This is also preparing the code for easy to use in gapless cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to metadata required to do a gapless playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to gapless flag to q6asm_open_write().
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to ASM_DATA_CMD_REMOVE_INITIAL_SILENCE
and ASM_DATA_CMD_REMOVE_TRAILING_SILENCE q6asm command to support
compressed metadata for gapless playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add length to write command packet token so that we can track exactly
how many bytes are consumed by DSP in the command reply.
This is useful in some use-cases where the end of the file/stream
is not aligned with period size.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
use flags set by q6asm-dais directly!
This will be useful gapless case where write needs a special flag to indicate
that last buffer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each ASM session can have multiple streams attached to it,
current design was to allow only one static stream id 1 per each session.
However for use-case like gapless, we would need 2 streams to open per session.
This patch converts all the q6asm apis to take stream id as argument
to allow multiple streams to open on a single session, This is useful
for gapless playback cases.
Now the dai driver can specify which stream id for each command.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each q6asm session can have multiple streams, mixing usage of these
names in variable are bit misleading to reader, so rename them accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200727093806.17089-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable I2S TDM audio capture for Intel Keem Bay platform.
The I2S TDM will support 4 channel and 8 channel audio capture only.
4 channel and 8 channel audio capture operates only in slave mode.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200811041836.999-2-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving GPIO reset to a later stage and before clock registration to
ensure that the host system and codec clocks are in sync. If the host
register clock values prior to gpio reset, the last configured codec clock
is registered to the host. The codec then gets gpio resetted setting the
codec clocks to their default value, causing a mismatch. Host system will
skip clock setting thinking the codec clocks are already at the requested
rate.
ADC reset is added to ensure the next audio capture does not have
undesired artifacts. It is probably related to the original code
where the probe function resets the ADC prior to 1st record.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-4-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increased maximum supported channel to 8 channels for audio capture
running in TDM mode.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-3-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable 24 bit in 32 bit container audio support.
Using the params_physical_width to differentiate
24 bit in 32 bit container and 24 bit in 24 bit container modes.
Use the sample rate, bit depth and channel parameters to
calculate the bit clock needed.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200812094631.4698-2-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the earpiece mute switch in the DAPM graph, both the
earpiece amplifier and the Mixer/DAC inputs can be powered off when
the earpiece is muted.
While the widget is really just a simple switch, it is represented
as a "mixer with named controls" to avoid including the widget name
in the kcontrol name. Otherwise, it is not possible to give the widget
an accurate, descriptive name without changing the kcontrol name
seen by userspace (which should be stable).
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726025334.59931-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the line out mute switch in the DAPM graph, the
Mixer/DAC inputs can be powered off when the line output is muted.
The line outputs have an unusual routing scheme. The left side mute
switch is between the source selection and the amplifier, as usual.
The right side source selection comes *after* its amplifier (and
after the left side amplifier), and its mute switch controls
whichever source is currently selected. This matches the diagram in
the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) line out mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the headphone mute switch to the DAPM graph, both the
headphone amplifier and the Mixer/DAC inputs can be powered off when
the headphones are muted.
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) headphone mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the controls in the same order as the bits in the register. Then
group the routes by sink, and sort them in the same order as the
controls. This makes it much easier to verify that all mixer inputs are
accounted for.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock must be running for the zero-crossing mute functionality.
However, it must be gated for VDD-SYS to be turned off during system
suspend. Disable it in the suspend callback, after everything has
already been muted, to avoid pops when muting/unmuting outputs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The same enable bits are currently used for both the "Left/Right ADC"
and the "Left/Right ADC Mixer" widgets. This happens to work in practice
because the widgets are always enabled/disabled at the same time, but
each register bit should only be associated with a single widget.
To keep symmetry with the DAC widgets, keep the bits on the ADC widgets,
and remove them from the ADC Mixer widgets.
Fixes: 42371f327d ("ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warnings:
sound/soc/intel/boards/bdw-rt5650.c:91:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
sound/soc/intel/boards/bdw-rt5677.c:144:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
sound/soc/intel/boards/broadwell.c:91:23: style: Local variable
'channels' shadows outer variable [shadowVariable]
This was fixed earlier in other machine drivers but keeps coming back
with copy/paste.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813175839.59422-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck reports the following warning:
sound/soc/sof/intel/hda-codec.c:191:1: style: Label 'error' is not
used. [unusedLabel]
This label is indeed only used conditionally, move it where it's
actually used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813175839.59422-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the A64, as tested using the PinePhone, the current code causes the
left/right channels to be swapped during I2S playback from the CPU on
AIF1, and breaks DSP_A communication with the modem on AIF2. Both of
these are fixed when LRCK is no longer inverted.
Trusting that the comment in the code is correct, the existing behavior
is kept for the A33.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i-codec driver provides ALSA controls for enabling/disabling
each of the inputs to the AIF1 Slot 0 and DAC mixers. For two of these
inputs (ADC->DAC and AIF1 DA0->AIF1 AD0), the audio source is
implemented, so the mixer inputs can be used.
However, because the DAPM routes are missing, these mixer inputs only
work when both the source and the mixer happen to be part of other
active audio paths. Adding the appropriate routes makes these ALSA
controls function all of the time.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The A33/A64 digital codec has 4 physical inputs and 4 physical outputs:
3 AIFs/DAIs and one ADC/DAC pair. Internal routing is accomplished by
a 4-channel mixer connected to each output.
The analog and digital sides of the ADC/DAC are in separate ASoC
components, so card-level DAPM routes (provided in the device tree) are
necessary to connect them together. Currently, these routes are wrong.
For AIF1 Playback, the correct topology is:
||<<============ sun8i-codec ===========>>||
|| ||
CPU DAI -> AIF1 DA0 -> DAC Mixer -> DAC (digital) -> DAC (analog)
|| ||
but the driver and device trees currently describe:
|| ||
CPU DAI -> AIF1 DA0 -------------------------------> DAC (analog)
|| \--> DAC Mixer -> ??? [dead end] ||
For AIF1 Capture, there is an additional problem, because the Mixer
route is backward. The topology should be:
|| ||
ADC (analog) -> ADC (digital) -> AIF1 AD0 Mixer -> AIF1 AD0 -> CPU DAI
|| ||
but the driver and device trees currently describe:
|| ||
ADC (analog) -> AIF1 AD0 ------------------------------------> CPU DAI
|| \--> ADC Mixer -> ??? [dead end] ||
The ADC/DAC are only powered because AIF1 AD0 (capture) has supply
routes from the ADC, and AIF1 DA0 (playback) has supply routes from the
DAC. However, neither set of supply routes matches the hardware
topology. Audio can be routed among AIF1/2/3 without using the ADC or
DAC at all; and audio can be routed from the ADC to the DAC without
using any AIFs (via the "ADC Digital DAC Playback Switch"). Because the
DAPM routes are wrong, both of these use cases are currently broken.
This commit adds the necessary widgets and routes to represent the real
hardware topology, with functionality equivalent to the current driver.
For the existing "allwinner,sun8i-a33-codec" compatible, widgets with
the old names are kept as wrappers around the new widgets, so existing
device trees will continue to work. For "allwinner,sun50i-a64-codec",
the old widgets can be omitted, because no device trees yet use that
compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As new function fsl_sai_dir_is_synced is included for checking if
stream is synced by the opposite stream, then replace the existing
synchronous checking with this new function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200805063413.4610-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tx synchronous with Rx: The RMR is the word mask register, it is used
to mask any word in the frame, it is not relating to clock generation,
So it is no need to be changed when Tx is going to be enabled.
Rx synchronous with Tx: The TMR is the word mask register, it is used
to mask any word in the frame, it is not relating to clock generation,
So it is no need to be changed when Rx is going to be enabled.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200805063413.4610-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current code enables TCSR.TE and RCSR.RE together, and disable
TCSR.TE and RCSR.RE together in trigger(), which only supports
one operation mode：
1. Rx synchronous with Tx: TE is last enabled and first disabled
Other operation mode need to be considered also:
2. Tx synchronous with Rx: RE is last enabled and first disabled.
3. Asynchronous mode: Tx and Rx are independent.
So the enable TCSR.TE and RCSR.RE sequence and the disable
sequence need to be refined accordingly for #2 and #3.
There is slightly against what RM recommennds with this change.
For example in Rx synchronous with Tx mode, case "aplay 1.wav;
arecord 2.wav" enable TE before RE. But it should be safe to
do so, judging by years of testing results.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200805063413.4610-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_irq_byname() is used when there is list
of interrupts in the device node. As lpass-platform
has only one interrupt entry, use platform_get_irq()
instead.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Link: https://lore.kernel.org/r/1597402388-14112-12-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_resource_byname() is used when there
is list of reg entries. As lpass-cpu node has only
one reg entry, use platform_get_resource() instead.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-11-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.
Fixes: 80beab8e1d ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
I2SCTL and DMACTL registers has different bits alignment for newer
LPASS variants of SC7180 soc. Use REG_FIELD_ID() to define the
reg_fields in platform specific file and removed shifts and mask
macros for such registers from header file.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Link: https://lore.kernel.org/r/1597402388-14112-6-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.
Fixes: 022d00ee0b ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-5-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We are allocating dma memory for component->dev but trying to mmap
such memory for substream->pcm->card->dev. Replace device argument
in mmap with component->dev to fix this.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-4-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Ahbix clock is optional clock and not needed for all platforms.
Move it to lpass-apq8016/ipq806x as it is not needed for sc7180.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-3-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS variants have their own soc specific clocks that needs to be
enabled for MI2S audio support. Added a common variable in drvdata to
initialize such clocks using bulk clk api. Such clock names is
defined in variants specific data and needs to fetched during init.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-2-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The (new?) style of clk registration uses clk_hw based APIs so that we
can more easily see the difference between clk providers and clk
consumers. Use the clk_hw based APIs to do this and migrate to devm for
the clkdev creation so that we can reduce the amount of code.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200804000531.920688-4-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The __clk_get_name() API is deprecated. Use clk_hw_get_name() or
proper registration techniques to avoid it.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200804000531.920688-3-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
I see a spew of "sysclk/dai not set correctly" whenever I cat
/sys/kernel/debug/clk/clk_summary on my device. This is because the
master pointer isn't set yet in this driver. A user isn't going to be
able to do much if this check is failing so this error message isn't
really an error, it's more of a kernel debug message. Lower the priority
to dev_dbg() so that it isn't so noisy.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200804000531.920688-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When power_up_sst() fails, stream needs to be freed
just like when try_module_get() fails. However, current
code is returning directly and ends up leaking memory.
Fixes: 0121327c1a ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver supports WM1811, WM8994, WM8958 devices but according to
documentation and the regmap definitions the WM8958_DSP2_* registers
are only available on WM8958. In current code these registers are
being accessed as if they were available on all the three chips.
When starting playback on WM1811 CODEC multiple errors like:
"wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5"
can be seen, which is caused by attempts to read an unavailable
WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent
commit "e2329ee ASoC: soc-component: add soc_component_err()".
This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling
is only done for WM8958.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason interrupt set and clear register offsets are
not set correctly.
This patch corrects them!
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200811103452.20448-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ADC2 and DAC2 are not available on WM1811 device. This patch moves
the ADC2, DAC2 VU bitfields to a separate array so we can skip accessing
them and avoid unreadable register access on WM1811.
This allows to get rid of warnings during boot like:
wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200804141043.11425-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
To fix this add dummy read/write function to return default value.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like the q6afe-dai dapm widget registers are set as "0",
which is a not correct.
As this registers will be read by ASoC core during startup
which will throw up errors, Fix this by making the registers
as SND_SOC_NOPM as these should be never used.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Along with the recent unification of snd_soc_component_read*()
functions, the behavior of snd_soc_component_read() was changed
slightly; namely it returns the register read value directly, and even
if an error happens, it returns zero (but it prints an error
message). That said, the caller side can't know whether it's an error
or not any longer.
Ideally this shouldn't matter much, but in practice this seems causing
a regression, as John reported. And, grepping the tree revealed that
there are still plenty of callers that do check the error code, so
we'll need to deal with them in anyway.
As a quick band-aid over the regression, this patch changes the return
value of snd_soc_component_read() again to the negative error code.
It can't work, obviously, for 32bit register values, but it should be
enough for the known regressions, so far.
Fixes: cf6e26c71b ("ASoC: soc-component: merge snd_soc_component_read() and snd_soc_component_read32()")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200810134631.19742-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Replacing string compare with "codec_dai->name" instead of comparing with
"codec_dai->component->name" in hw_params because,
Here the component name for codec RT1015 is "i2c-10EC5682:00"
and will never be "rt1015-aif1" as it is codec-dai->name.
So, strcmp() always compares and fails to set the
sysclk,pll,bratio for expected codec-dai="rt1015-aif1".
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200807161046.17932-1-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
* API cleanups and conversions to the unified mute_stream() call
* Simplify I/O helper functions
* Use helper macros to retrieve RTD from substreams
ASoC drivers:
* Lots of fixes and cleanups in Intel ASoC drivers
* Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
* Minor code refacotring for SG-buffer handling
HD-audio:
* Generalization of mute-LED handling with LED classdev
* Intel silent stream support for HDMI
* Device-specific fixes: CA0132, Loongson-3
Others:
* Usual USB- and HD-audio quirks for various devices
* Fixes for echoaudio DMA position handling
* Various documents and trivial fixes for sparse warnings
* Conversion to adapt inclusive terms
-----BEGIN PGP SIGNATURE-----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=sy7n
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became wide and scattered updates all over the sound tree as
diffstat shows: lots of (still ongoing) refactoring works in ASoC,
fixes and cleanups caught by static analysis, inclusive term
conversions as well as lots of new drivers. Below are highlights:
ASoC core:
- API cleanups and conversions to the unified mute_stream() call
- Simplify I/O helper functions
- Use helper macros to retrieve RTD from substreams
ASoC drivers:
- Lots of fixes and cleanups in Intel ASoC drivers
- Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S,
Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards,
nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries
boards, TI J721e EVM
ALSA core:
- Minor code refacotring for SG-buffer handling
HD-audio:
- Generalization of mute-LED handling with LED classdev
- Intel silent stream support for HDMI
- Device-specific fixes: CA0132, Loongson-3
Others:
- Usual USB- and HD-audio quirks for various devices
- Fixes for echoaudio DMA position handling
- Various documents and trivial fixes for sparse warnings
- Conversion to adopt inclusive terms"
* tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits)
ALSA: pci: delete repeated words in comments
ALSA: isa: delete repeated words in comments
ALSA: hda/tegra: Add 100us dma stop delay
ALSA: hda: Add dma stop delay variable
ASoC: hda/tegra: Set buffer alignment to 128 bytes
ALSA: seq: oss: Serialize ioctls
ALSA: hda/hdmi: Add quirk to force connectivity
ALSA: usb-audio: add startech usb audio dock name
ALSA: usb-audio: Add support for Lenovo ThinkStation P620
Revert "ALSA: hda: call runtime_allow() for all hda controllers"
ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.
ALSA: hda/ca0132 - Add new quirk ID for Recon3D.
ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.
ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops
ALSA: docs: fix typo
ALSA: doc: use correct config variable name
ASoC: core: Two step component registration
ASoC: core: Simplify snd_soc_component_initialize declaration
ASoC: core: Relocate and expose snd_soc_component_initialize
ASoC: sh: Replace 'select' DMADEVICES 'with depends on'
...
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
The variable rtd was left unused in psc_dma_free(), even unnoticed
during conversion to a new style:
sound/soc/fsl/mpc5200_dma.c:342:30: warning: unused variable 'rtd' [-Wunused-variable]
Drop the superfluous one.
Fixes: 6d1048bc11 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803144630.9615-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_i2s.c:167:12: warning: 'tegra210_i2s_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_i2s.c:179:12: warning: 'tegra210_i2s_runtime_resume' defined but not used [-Wunused-function]
Fixes: c0bfa98349 ("ASoC: tegra: Add Tegra210 based I2S driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_dmic.c:43:12: warning: 'tegra210_dmic_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_dmic.c:55:12: warning: 'tegra210_dmic_runtime_resume' defined but not used [-Wunused-function]
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_ahub.c:567:12: warning: 'tegra_ahub_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_ahub.c:579:12: warning: 'tegra_ahub_runtime_resume' defined but not used [-Wunused-function]
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_admaif.c:232:12: warning: 'tegra_admaif_runtime_resume' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_ahub.c:567:12: warning: 'tegra_ahub_runtime_suspend' defined but not used [-Wunused-function]
Fixes: f74028e159 ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra186_dspk.c:74:12: warning: 'tegra186_dspk_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra186_dspk.c:86:12: warning: 'tegra186_dspk_runtime_resume' defined but not used [-Wunused-function]
Fixes: 327ef64702 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Recently we found an issue about the suspend and resume. If dmic is
recording the sound, and we run suspend and resume, after the resume,
the dmic can't work well anymore. we need to close the app and reopen
the app, then the dmic could record the sound again.
For example, we run "arecord -D hw:CARD=acp,DEV=0 -f S32_LE -c 2
-r 48000 test.wav", then suspend and resume, after the system resume
back, we speak to the dmic. then stop the arecord, use aplay to play
the test.wav, we could hear the sound recorded after resume is weird,
it is not what we speak to the dmic.
I found two registers are set in the dai_hw_params(), if the two
registers are set during the resume, this issue could be fixed.
Move the code of the dai_hw_params() into the pdm_dai_trigger(), then
these two registers will be set during resume since pdm_dai_trigger()
will be called during resume. And delete the empty function
dai_hw_params().
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200730123138.5659-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing ADDITIONAL_CONTROL_4 from the list of readable registers cause
audio distortion.
This change was sent as a comment below the --- line when submitting
commit 658bb297e3 ("ASoC: wm8962: Do not access WM8962_GPIO_BASE"), so
it was not supposed to get merged.
Keep WM8962_ADDITIONAL_CONTROL_4 inside wm8962_readable_register() to
fix the regression.
Fixes: 658bb297e3 ("ASoC: wm8962: Do not access WM8962_GPIO_BASE")
Reported-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200803115233.19034-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With this case:
aplay -Dhw:x 16khz.wav 24khz.wav
There is sound distortion for 24khz.wav. The reason is that setting
PLL of WM8962 with set_bias_level function, the bias level is not
changed when 24khz.wav is played, then the PLL won't be reset, the
clock is not correct, so distortion happens.
The resolution of this issue is to remove fsl_asoc_card_set_bias_level.
Move PLL configuration to hw_params and hw_free.
After removing fsl_asoc_card_set_bias_level, also test WM8960 case,
it can work.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1596420811-16690-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a mechanism for true two-step component registration. This
mimics device registration flow where initialization is the first step
while addition goes as second in line. Drivers may choose to modify
component's fields before registering component to ASoC subsystem via
snd_soc_add_component.
Patchset achieves status quo - behavior of snd_soc_register_component
remains unchanged.
Cezary Rojewski (3):
ASoC: core: Relocate and expose snd_soc_component_initialize
ASoC: core: Simplify snd_soc_component_initialize declaration
ASoC: core: Two step component registration
include/sound/soc-component.h | 3 --
include/sound/soc.h | 11 +++---
sound/soc/soc-component.c | 16 ---------
sound/soc/soc-core.c | 52 +++++++++++++++++----------
sound/soc/soc-generic-dmaengine-pcm.c | 14 +++++---
sound/soc/stm/stm32_adfsdm.c | 9 +++--
6 files changed, 55 insertions(+), 50 deletions(-)
--
2.17.1
Modify snd_soc_add_component so it calls snd_soc_component_initialize
no longer and thus providing true two-step registration. Drivers may
choose to change component's fields before actually adding it to ASoC
subsystem.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move 'name' field initialization responsibility back to
snd_soc_component_initialize to prepare snd_soc_add_component function
for being called separatelly as a second registration step.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for two-step component registration, expose
snd_soc_component_initialize function and move it back to soc-core.c.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200731144146.6678-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enabling a whole subsystem from a single driver 'select' is frowned
upon and won't be accepted in new drivers, that need to use 'depends on'
instead. Existing selection of DMADEVICES will then cause circular
dependencies. Replace them with a dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200731152433.1297-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fifo_depth is 64 on i.MX8QM/i.MX8QXP, 128 on i.MX8MQ, 16 on
i.MX7ULP.
Original FSL_SAI_CR1_RFW_MASK value 0x1F is not suitable for
these platform, the FIFO watermark mask should be updated
according to the fifo_depth.
Fixes: a860fac420 ("ASoC: fsl_sai: Add support for imx7ulp/imx8mq")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1596176895-28724-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b73287f0b0 ("ASoC: soc-pcm: dpcm: fix playback/capture checks")
changed the meaning of dpcm_playback/dpcm_capture and now requires the
CPU DAI BE to aligned with those flags.
This broke all Amlogic cards with uni-directional backends (All gx and
most axg cards).
While I'm still confused as to how this change is an improvement, those
cards can't remain broken forever. Hopefully, next time an API change is
done like that, all the users will be updated as part of the change, and
not left to fend for themselves.
Fixes: b73287f0b0 ("ASoC: soc-pcm: dpcm: fix playback/capture checks")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200731120603.2243261-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previous updates to set dailink capabilities and check dailink
capabilities were based on a flawed assumption that all dais support
the same capabilities as the dailink. This is true for TDM
configurations but existing configurations use an amplifier and a
capture device on the same dailink, and the tests would prevent the
card from probing.
This patch modifies the snd_soc_dai_link_set_capabilities()
helper so that the dpcm_playback (resp. dpcm_capture) dailink
capabilities are set if at least one dai supports playback (resp. capture).
Likewise the checks are modified so that an error is reported only
when dpcm_playback (resp. dpcm_capture) is set but none of the CPU
DAIs support playback (resp. capture).
Fixes: 25612477d2 ('ASoC: soc-dai: set dai_link dpcm_ flags with a helper')
Fixes: b73287f0b0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200723180533.220312-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The various list iterators are able to handle an empty list.
The only effect of avoiding the loop is not initializing some
index variables.
Drop list_empty tests in cases where these variables are not
used.
The semantic patch that makes these changes is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@
expression x,e;
iterator name list_for_each_entry;
statement S;
identifier i;
@@
-if (!(list_empty(x))) {
list_for_each_entry(i,x,...) S
- }
... when != i
? i = e
@@
expression x,e;
iterator name list_for_each_entry_safe;
statement S;
identifier i,j;
@@
-if (!(list_empty(x))) {
list_for_each_entry_safe(i,j,x,...) S
- }
... when != i
when != j
(
i = e;
|
? j = e;
)
@@
expression x,e;
iterator name list_for_each;
statement S;
identifier i;
@@
-if (!(list_empty(x))) {
list_for_each(i,x) S
- }
... when != i
? i = e
@@
expression x,e;
iterator name list_for_each_safe;
statement S;
identifier i,j;
@@
-if (!(list_empty(x))) {
list_for_each_safe(i,j,x) S
- }
... when != i
when != j
(
i = e;
|
? j = e;
)
// -------------------
@@
expression x,e;
statement S;
identifier i;
@@
-if (!(list_empty(x)))
list_for_each_entry(i,x,...) S
... when != i
? i = e
@@
expression x,e;
statement S;
identifier i,j;
@@
-if (!(list_empty(x)))
list_for_each_entry_safe(i,j,x,...) S
... when != i
when != j
(
i = e;
|
? j = e;
)
@@
expression x,e;
statement S;
identifier i;
@@
-if (!(list_empty(x)))
list_for_each(i,x) S
... when != i
? i = e
@@
expression x,e;
statement S;
identifier i,j;
@@
-if (!(list_empty(x)))
list_for_each_safe(i,j,x) S
... when != i
when != j
(
i = e;
|
? j = e;
)
</smpl>
---
drivers/media/pci/saa7134/saa7134-core.c | 14 ++---
drivers/media/usb/cx231xx/cx231xx-core.c | 16 ++----
drivers/media/usb/tm6000/tm6000-core.c | 24 +++-------
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c | 13 ++---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c | 5 --
drivers/net/ethernet/sfc/ptp.c | 20 +++-----
drivers/net/wireless/ath/dfs_pattern_detector.c | 15 ++----
sound/soc/intel/atom/sst/sst_loader.c | 10 +---
sound/soc/intel/skylake/skl-pcm.c | 8 +--
sound/soc/intel/skylake/skl-topology.c | 5 --
10 files changed, 53 insertions(+), 77 deletions(-)
PulseAudio (and perhaps other userspace utilities) can not detect any
jack for rk3399_gru_sound as the driver doesn't expose related Jack
kcontrols.
This patch adds two DAPM pins to the headset jack, where the
snd_soc_card_jack_new() call automatically creates "Headphones Jack" and
"Headset Mic Jack" kcontrols from them.
With an appropriate ALSA UCM config specifying JackControl fields for
the "Headphones" and "Headset" (mic) devices, PulseAudio can detect
plug/unplug events for both of them after this patch.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20200721182709.6895-1-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the WM8962 datasheet, there is no register at address 0x200.
WM8962_GPIO_BASE is just a base address for the GPIO registers and not a
real register, so remove it from wm8962_readable_register().
Also, Register 515 (WM8962_GPIO_BASE + 3) does not exist, so skip
its access.
This fixes the following errors:
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
wm8962 0-001a: ASoC: error at soc_component_read_no_lock on wm8962.0-001a: -16
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200717135959.19212-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use resource_size rather than a verbose computation on
the end and start fields.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1595751933-4952-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
list_for_each_entry_safe is able to handle an empty list.
The only effect of avoiding the loop is not initializing the
index variable.
Drop list_empty tests in cases where these variables are not
used.
Note that list_for_each_entry_safe is defined in terms of
list_first_entry, which indicates that it should not be used on an
empty list. But in list_for_each_entry_safe, the element obtained by
list_first_entry is not really accessed, only the address of its
list_head field is compared to the address of the list head, so the
list_first_entry is safe.
The semantic patch that makes this change is as follows (with another
variant for the no brace case): (http://coccinelle.lip6.fr/)
<smpl>
@@
expression x,e;
iterator name list_for_each_entry_safe;
statement S;
identifier i,j;
@@
-if (!(list_empty(x))) {
list_for_each_entry_safe(i,j,x,...) S
- }
... when != i
when != j
(
i = e;
|
? j = e;
)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1595761112-11003-2-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Passing specific snd_soc_card structure depending on the ACPI ID.
In future we can add other IDs in the ACPI table and pass the structure.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-3-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As in future our machine driver supports multiple codecs
So changing naming convention of snd_soc_card struct and its fields.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200728160255.31020-2-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for voice and BT calls, along with standard
audio output via the speaker, earpiece, headphone jack, HDMI, and
any accessories compatible with Midas boards. This patch also supports
headphone/headset detection and headsets with inline buttons.
[m.szyprowski: adaptation to v5.1+ kernels (DAI links initialization)]
[s.nawrocki: removal of the clk API calls for CODEC MCLK, the jack data
structure moved to struct midas_priv, coding style and typo fixes,
conversion to new cpu/codec/dai-node binding]
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728131111.14334-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset the device before programming the registers or all programming
will be lost as the device resets registers to default settings.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header was updated to align with the data sheet to start the GPO_CFG
at GPO_CFG0. The code was not updated to the change and therefore the
GPO_CFG0 register was not written to.
Fixes: 6617cff6a0 ("ASoC: tlv320adcx140: Add GPO configuration and drive output config")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200730142419.28205-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All channels are enabled at boot up, this patch ensures that all
channels are disabled at boot and whenever the function is called.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200730055319.1522-3-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable 8kHz audio support for Intel Keem Bay platform.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200730055319.1522-2-michael.wei.hong.sit@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocation order of things in soc_new_pcm_runtime was changed to
move the device_register before the allocation of the rtd structure.
This was to allow the rtd allocation to be managed by devm. However
currently the sysfs entries are added by device_register and their
visibility depends on variables within the rtd structure, this causes
the pmdown_time and dapm_widgets sysfs entries to be missing for all
rtds.
Correct this issue by manually calling device_add_groups after the
appropriate information is available.
Fixes: d918a37610 ("ASoC: soc-core: tidyup soc_new_pcm_runtime() alloc order")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200730120715.637-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Standard dai format property don't need the "amlogic," prefix.
There nothing amlogic specific about them. Just remove it.
Fixes: 435857e015 ("ASoC: meson: align axg card driver with DT bindings documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After carefully checking, it appears that both tdmout and tdmin require the
rising edge of the sclk they get to be synchronized with the frame sync
event (which should be a rising edge of lrclk).
TDMIN was improperly set before this patch. Remove the sclk_invert quirk
which is no longer needed and fix the sclk phase.
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After carefully checking the result provided by the TDMIN on the g12a and
sm1 SoC families, the TDMIN skew offset appears to be 3 instead of 2 on the
axg.
Fixes: f01bc67f58 ("ASoC: meson: axg-tdm-formatter: rework quirks settings")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .set_fmt() callback of the axg tdm interface incorrectly
test the content of SND_SOC_DAIFMT_MASTER_MASK as if it was a
bitfield, which it is not.
Implement the test correctly.
Fixes: d60e4f1e4b ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add General Purpose Output (GPO) configuration and driver output
configuration. The GPOs can be configured as a GPO, IRQ, SDOUT or a
PDMCLK output. In addition the output drive can be configured with
various configurations.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728160833.24130-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix white space issues and remove else case where it was not needed.
Convert "static const char *" to "static const char * const"
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200728164339.16841-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This set of patches is required for facilitating system S0ix
entry when the DSP is in D0I3. This first patch adds the missing
CORB/RIRB DMA stop and restart to the suspend/resume sequence along
with powering up/down the links. The second patch ensures that the
FW traces are disabled when the system enters S0ix with the DSP in D0I3.
Marcin Rajwa (2):
ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry
ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3
sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 4 deletions(-)
--
2.25.1
Update the shutdown GPIO property to be shutdown from shut-down.
Fixes: c173dba44c ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200723160838.9738-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should always disable DMA trace on S0Ix. When staying at S0-D0I3,
we should enable DMA trace while both DMA Trace debug is enabled and
hda_enable_trace_D0I3_S0 is set. This commit corrects the existed
logic errors about that.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the suspend & resume procedure to allow entry into the
low power states with some streams being active as a wake source - wake on
voice is a perfect example. The current implementation does not stop
the CORB/RIRB DMA and does not power down the HDA links. With firmware's
help, the platform has been able to still enter s0ix state on older
platforms, but the sequence is still incorrect, and the additional
driver actions are needed to ensure correct s0ix behaviour.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Right now the direction of a DAI has to be specified as a literal
number in the device tree, e.g.:
dai@0 {
reg = <0>;
direction = <2>;
};
but this does not make it immediately clear that this is a
playback/RX-only DAI.
Actually, q6asm-dai.c has useful defines for this. Move them to the
dt-bindings header to allow using them in the dts(i) files.
The example above then becomes:
dai@0 {
reg = <0>;
direction = <Q6ASM_DAI_RX>;
};
which is immediately recognizable as playback/RX-only DAI.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200727082502.2341-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
PME_EN state needs to restored to the value set by fmw.
For the devices which are not using I2S wake event which gets
enabled by PME_EN bit, keeping PME_EN enabled burns considerable amount
of power as it blocks low power state.
For the devices using I2S wake event, PME_EN gets enabled in fmw and the
state should be maintained after ACP Power On.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200724195600.11798-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tuxtydcz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9i9yddc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime_usage of sound card has been observed to grow without bound.
For example:
$ cat /sys/devices/platform/sound/power/runtime_usage
46
$ sox -n -t s16 -r 48000 -c 2 - synth 1 sine 440 vol 0.1 | \
aplay -q -D hw:0,0 -f S16_LE -r 48000 -c 2
$ cat /sys/devices/platform/sound/power/runtime_usage
52
Commit 4e872a4682 ("ASoC: dapm: Don't force card bias level to be
updated") stops to force update bias_level on card. If card doesn't
provide set_bias_level callback, the snd_soc_dapm_set_bias_level()
is equivalent to NOP for card device.
As a result, dapm_pre_sequence_async() doesn't change the bias_level of
card device correctly. Thus, pm_runtime_get_sync() would be called in
dapm_pre_sequence_async() without symmetric pm_runtime_put() in
dapm_post_sequence_async().
Don't call pm_runtime_* on card device.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200724070731.451377-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment we have two separate functions to parse the sound card
properties from the device tree: qcom_snd_parse_of() for DPCM and
apq8016_sbc_parse_of() without DPCM. These functions are almost identical
except for a few minor differences.
This patch set extends qcom_snd_parse_of() to handle links without DPCM,
so that we can use one common function for all (qcom) machine drivers.
Stephan Gerhold (7):
ASoC: qcom: Use devm for resource management
ASoC: qcom: common: Use snd_soc_dai_link_set_capabilities()
ASoC: q6afe: Remove unused q6afe_is_rx_port() function
ASoC: qcom: common: Support parsing links without DPCM
ASoC: qcom: common: Parse properties with "qcom," prefix
ASoC: qcom: apq8016_sbc: Use qcom_snd_parse_of()
ASoC: qcom: common: Avoid printing errors for -EPROBE_DEFER
sound/soc/qcom/Kconfig | 1 +
sound/soc/qcom/apq8016_sbc.c | 120 ++++-------------------------------
sound/soc/qcom/apq8096.c | 28 +-------
sound/soc/qcom/common.c | 58 ++++++++++-------
sound/soc/qcom/qdsp6/q6afe.c | 8 ---
sound/soc/qcom/qdsp6/q6afe.h | 1 -
sound/soc/qcom/sdm845.c | 40 ++----------
7 files changed, 59 insertions(+), 197 deletions(-)
--
2.27.0
Modify dsm_init sequence and dsm param bin check condition.
- Move dsm_init() to after amp init setting to
make sure dsm init is last setting.
- dsm param bin check condition changed for extended register setting.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200724060149.19261-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit e2329eeba4 ("ASoC: soc-component: add soc_component_err()")
every error different for ENOTSUPP or EPROBE_DEFER will log an error.
However, as explained in snd_soc_get_dai_name(), this callback may error
to indicate that the DAI is not matched by the component tested. If the
device provides other components, those may still match. Logging an error
in this case is misleading.
Don't use soc_component_ret() in snd_soc_component_of_xlate_dai_name()
to avoid spamming the log.
Fixes: e2329eeba4 ("ASoC: soc-component: add soc_component_err()")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200723142020.1338740-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom_snd_parse_of() tends to produce lots of error messages during bootup:
MultiMedia1: error getting cpu dai name
This happens because the DAIs are not probed until the ADSP remoteproc
has booted, which takes a while. Until it is ready, snd_soc_of_get_dai_name()
returns -EDEFER_PROBE to retry probing later. This is perfectly normal,
so cleanup the kernel log a bit by not printing in case of -EPROBE_DEFER.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-8-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have updated qcom_snd_parse_of() to handle the device
tree bindings used for apq8016_sbc, update the apq8016_sbc driver
to use the common function and remove the duplicated code.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-7-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The apq8016_sbc device tree binding uses a "qcom," vendor prefix
for all device tree properties, while qcom_snd_parse_of() uses the
same properties without a prefix.
In the future it would be nice to make this consistent, however,
for backwards compatibility we need to parse both names to allow
apq8016_sbc to use the common qcom_snd_parse_of() function.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-6-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
So far qcom_snd_parse_of() was only used to parse the device tree
for boards using the QDSP6 driver together with DPCM. apq8016_sbc
uses an almost identical version (apq8016_sbc_parse_of()) which
parses links without DPCM.
Given the similarity of the two functions it is useful to combine
these two. To allow using qcom_snd_parse_of() in apq8016_sbc we
need to support parsing links without DPCM as well.
This is pretty simple: A DPCM link in the device tree is defined using:
- DPCM frontend: "cpu"
- DPCM backend: "cpu", "platform" and "codec"
... while a link without DPCM has "cpu" and "codec" (but no "platform").
Add a few more if conditions to handle links without DPCM correctly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-5-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 4a95737440 ("ASoc: q6afe: add support to get
port direction"), since the function is not needed anymore.
q6afe-dai already exposes the possible directions for a DAI through
the DAI capabilities (playback/capture-only DAI). Now we use
snd_soc_dai_link_set_capabilities() to infer the information
directly from the DAI capabilities.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-4-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
introduced a call to q6afe_is_rx_port() to set the dpcm_playback/capture
parameters correctly. This is necessary because those parameters are now
validated to match the capabilities of the DAIs. [1]
The disadvantage of introducing the call to q6afe_is_rx_port() is that
it makes the qcom_snd_parse_of() helper dependent on the QDSP6 driver.
When the ADSP is bypassed (e.g. in apq8016-sbc) QDSP6 is not used.
There is a generic solution for this now: The correct direction for the links
is already defined by the DAI capabilities (e.g. rx ports only support playback).
Commit 25612477d2 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
introduced the snd_soc_dai_link_set_capabilities() function that we can use
to set dpcm_playback/dpcm_capture according to the capabilities of the DAIs.
Use that for both FE/BE DAI links to avoid the dependency on the QDSP6 driver.
[1]: https://lore.kernel.org/alsa-devel/20200616085409.GA110999@gerhold.net/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-3-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the machine drivers for newer SoCs a bit by using the
devm_* function calls that automatically release the resources
when the driver is removed or when probing fails.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200723183904.321040-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Global EN register guide to off before AMP_EN register
when amp disable sequence.
- remove AMP_EN control before max98390_dac_event call
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200724060058.19201-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support same propeties as simple card for configuring fmt
from DT.
In order to make this change compatible with old DT, these
properties are optional.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595302910-19688-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ESAI interfaces may share same interrupt line with EDMA on
some platforms (e.g. i.MX8QXP, i.MX8QM).
Add IRQF_SHARED flag to allow sharing the irq among several
devices
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595476808-28927-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Build errors are seen on 32-bit platforms because of a plain 64-by-32
division. For example, following build erros were reported.
"ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
"ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
This can be fixed by using div_u64() helper from 'math64.h' header.
Fixes: 8c8ff982e9 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_J721E_EVM should not select SND_SOC_PCM3168A_I2C when I2C
is not enabled. That causes build errors, so make this driver's
symbol depend on I2C.
WARNING: unmet direct dependencies detected for SND_SOC_PCM3168A_I2C
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n]
Selected by [m]:
- SND_SOC_J721E_EVM [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (DMA_OMAP [=y] || TI_EDMA [=m] || TI_K3_UDMA [=n] || COMPILE_TEST [=y]) && (ARCH_K3_J721E_SOC [=n] || COMPILE_TEST [=y])
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: data definition has no type or storage class
module_i2c_driver(pcm3168a_i2c_driver);
^~~~~~~~~~~~~~~~~
../sound/soc/codecs/pcm3168a-i2c.c:59:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: parameter names (without types) in function declaration
../sound/soc/codecs/pcm3168a-i2c.c:49:26: warning: ‘pcm3168a_i2c_driver’ defined but not used [-Wunused-variable]
static struct i2c_driver pcm3168a_i2c_driver = {
^~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Fixes: 6748d05590 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/e74c690c-c7f8-fd42-e461-4f33571df4ef@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718112403.13709-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Coefficient files now support additional metadata blocks, these
contain machine parsable text strings describing the parameters
contained in the coefficient file.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200723110321.16382-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718111209.11760-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718110857.11520-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
