Commit Graph

36 Commits

Author SHA1 Message Date
Stefan Roese c5db858bdf dmaengine: mv_xor: Add support for scatter-gather DMA mode
This patch adds memory to memory scatter-gather support to the Marvell
mv_or DMA driver.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-25 11:16:36 +05:30
Stefan Roese 77ff7a706f dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas
To enable the access to a specific area, the MVEBU XOR controllers needs
to have this area enabled / mapped via an address window. Right now,
only the DRAM memory area is enabled via such memory windows. So
using this driver to DMA to / from a e.g. PCIe memory region is
currently not supported.

This patch now adds support for such PCIe / IO regions by checking
if the src / dst address is located in an IO memory area in contrast
to being located in DRAM. This is done by using the newly introduced
MBus function mvebu_mbus_get_io_win_info(). If the src / dst address
is located in such an IO area, a new address window is created in
the XOR DMA controller. Enabling the controller to access this area.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-15 21:13:59 +05:30
Gregory CLEMENT dd130c652c dmaengine: mv_xor: use SoC type instead of directly the operation mode
Currently the main difference between legacy XOR engine and newer one, is
the way the engine modes are setup (either in the descriptor or through
the controller registers). In order to be able to take into account new
generation of the XOR engine for the ARM64 SoC, we need to identify them
by type, and then depending to the type the engine setup will be
selected.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-03 12:27:47 +05:30
Thomas Petazzoni 8b648436eb dmaengine: mv_xor: add suspend/resume support
This commit adds suspend/resume support to the mv_xor driver. The
config and interrupt mask registers must be saved and restored, and
upon resume, the MBus windows configuration must also be done again.

Tested on Armada 388 GP, with a RAID 5 array, accessed before and
after a suspend to RAM cycle.

Based on work from Ofer Heifetz and Lior Amsalem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06 15:42:27 +05:30
Thomas Petazzoni 7cbafa09e1 dmaengine: mv_xor: remove mv_xor_chan->current_type field
Since commit 3e4f52e2da ("dma: mv_xor: Simplify the DMA_MEMCPY
operation"), this field is no longer used, so get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06 15:42:26 +05:30
Lior Amsalem fbea28a2af dmaengine: mv_xor: improve descriptors list handling and reduce locking
This patch change the way free descriptors are marked.

Instead of having a field for descriptor in use, all the descriptors in the
all_slots list are free for use.

This simplify the allocation method and reduce the locking needed.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:31 +05:30
Lior Amsalem f1d25e0a9b dmaengine: mv_xor: Enlarge descriptor pool size
Now that we have 2 channels assigned to 2 CPUs and all requests are chained
on same channels, we need much more descriptors available to satisfy
async_tx workload.

3072 descriptors was found in our lab as the number of descriptors which
allow the async_tx stack to work without waiting for free descriptors on
submission of new requests.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:31 +05:30
Lior Amsalem 6f166312c6 dmaengine: mv_xor: add support for a38x command in descriptor mode
The Marvell Armada 38x SoC introduce new features to the XOR engine,
especially the fact that the engine mode (MEMCPY/XOR/PQ/etc) can be part of
the descriptor and not set through the controller registers.

This new feature allows mixing of different commands (even PQ) on the same
channel/chain without the need to stop the engine to reconfigure the engine
mode.

Refactor the driver to be able to use that new feature on the Armada 38x,
while keeping the old behaviour on the older SoCs.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:30 +05:30
Lior Amsalem 9136291f1d dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
This patch fixes a bug in the XOR driver where the cleanup function can be
called and free descriptors that never been processed by the engine (which
result in data errors).

The cleanup function will free descriptors based on the ownership bit in
the descriptors.

Fixes: ff7b04796d ("dmaengine: DMA engine driver for Marvell XOR engine")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10 22:18:30 +05:30
Jarkko Nikula 3b62286d0e dmaengine: Remove FSF mailing addresses
Free Software Foundation mailing address has been moved in the past and some
of the addresses here are outdated. Remove them from file headers since the
COPYING file in the kernel sources includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:28:15 +05:30
Lior Amsalem 22843545b2 dma: mv_xor: Add support for DMA_INTERRUPT
The driver is capable of supporting DMA_INTERRUPT by issuing a dummy 128-byte
transfer. This helps removing a poll in the async_tx stack, replacing it with
a completion interrupt.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 20:17:01 +05:30
Ezequiel Garcia 37380b980e dma: mv_xor: Remove dead code
The driver currently defines the USE_TIMER macro, but the timer-feature
is never used in the code. The XOR and CRC32 results are never used.

The 'unmap_xxx' fields are no longer needed, they were made obsolete
in commit: 54f8d501e8 dmaengine: remove DMA unmap from drivers.

Let's remove all this dead code.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 20:17:01 +05:30
Lior Amsalem ba87d13721 dma: mv_xor: Reduce interrupts by enabling EOD only when needed
This commit unmasks the end-of-chain interrupt and removes the
end-of-descriptor command setting on all transactions, except those
explicitly flagged with DMA_PREP_INTERRUPT.

This allows to raise an interrupt only on chain completion, instead of
on each descriptor completion, which reduces interrupt count.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 20:17:01 +05:30
Ezequiel Garcia 0e7488ed01 dma: mv_xor: Remove all interrupt magic numbers
This commit replaces the current magic numbers in the interrupt handling
with proper macros, which makes more readable and self-documenting.

While here replace the BUG() with a noisy WARN_ON(). There's no reason
to tear down the entire system for an DMA IRQ error.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 20:17:00 +05:30
Lior Amsalem dfc97661bd dma: mv_xor: Remove multi-slot support
Although the driver supported multiple-slot allocation, only one slot was
ever allocated for each transaction. So, given we have no users of the
multi-slot support, we can remove it and greatly simplify the code.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 20:17:00 +05:30
Ezequiel Garcia 82a1402eae dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
Despite requesting two memory resources, called 'base' and 'high_base', the
driver uses explicitly only the former. The latter is being used implicitly
by addressing at offset +0x200, which in practice accesses high_base.

In other words, the current driver breaks if the second memory resource
is ever place at an offset different from +0x200.

This patch fixes the above by defining the registers with the offset from
high_base, and use high_base explicitly where appropriate.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Thomas Petazzoni e03bc654f8 mv_xor: support big endian systems using descriptor swap feature
The mv_xor driver had never been used in a big-endian context, and
therefore was not using the hardware features to support such an
execution environment. The hardware provides a "descriptor swap" bit
that automatically swaps the bytes of the DMA descriptors, within
blocks of 8 bytes. This requires a different DMA descriptor layout on
big-endian systems, as well as enabling this "descriptor swap" bit.

This mechanism is exactly identical to the one already used in the
mv643xx_eth network driver and the mvneta network driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dan Williams <djbw@fb.com>
2013-08-22 22:57:37 -07:00
Bartlomiej Zolnierkiewicz 48a9db462d drivers/dma: remove unused support for MEMSET operations
There have never been any real users of MEMSET operations since they
have been introduced in January 2007 by commit 7405f74bad ("dmaengine:
refactor dmaengine around dma_async_tx_descriptor").  Therefore remove
support for them for now, it can be always brought back when needed.

[sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Acked-by: Dan Williams <djbw@fb.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:42 -07:00
Thomas Petazzoni c4b4b732b2 dma: mv_xor: clear the window override control registers
The XOR channels on Marvell SoCs have a Window Override Control
register that allow to do some fancy things with addresses. Those
features are not used by the driver, but some U-Boot versions anyway
modify those registers.

For some reason, the U-Boot on OpenBlocks AX3-4 was setting an invalid
value in those registers when the addition 2 GB DRAM chip was plugged
into the board, causing the XOR driver to fail in using the XOR
engines.

By setting those registers to 0 during the driver initialization, we
ensure that the registers are configured according with the driver
operation model.

Thanks to Lior Amsalem <alior@marvell.com> for his help in debugging
this problem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-22 18:16:37 +01:00
Thomas Petazzoni 88eb92cb4d dma: mv_xor: add missing free_irq() call
Even though the driver cannot be unloaded at the moment, it is still
good to properly free the IRQ handlers in the channel removal function.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:59:00 +01:00
Thomas Petazzoni b503fa0199 dma: mv_xor: remove the pool_size from platform_data
The pool_size is always PAGE_SIZE, and since it is a software
configuration paramter (and not a hardware description parameter), we
cannot make it part of the Device Tree binding, so we'd better remove
it from the platform_data as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:59:00 +01:00
Thomas Petazzoni c819ce177e dma: mv_xor: remove useless backpointer from mv_xor_chan to mv_xor_device
The backpointer from mv_xor_chan to mv_xor_device is now useless, get
rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:59 +01:00
Thomas Petazzoni 297eedbae1 dma: mv_xor: rename mv_xor_private to mv_xor_device
Now that mv_xor_device is no longer used to designate the per-channel
DMA devices, use it know to designate the XOR engine themselves
(currently composed of two XOR channels).

So, now we have the nice organization where:

 - mv_xor_device represents each XOR engine in the system
 - mv_xor_chan   represents each XOR channel of a given XOR engine

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:59 +01:00
Thomas Petazzoni 1ef48a262b dma: mv_xor: merge mv_xor_device and mv_xor_chan
Even though the DMA engine infrastructure has support for multiple
channels per device, the mv_xor driver registers one DMA engine device
for each channel, because the mv_xor channels inside the same XOR
engine have different capabilities, and the DMA engine infrastructure
only allows to express capabilities at the DMA engine device level.

The mv_xor driver has therefore been registering one DMA engine device
and one DMA engine channel for each XOR channel since its introduction
in the kernel. However, it kept two separate internal structures,
mv_xor_device and mv_xor_channel, which didn't make a lot of sense
since there was a 1:1 mapping between those structures.

This patch gets rid of this duplication, and merges everything into
the mv_xor_chan structure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:59 +01:00
Thomas Petazzoni 8c75979d7a dma: mv_xor: in mv_xor_device, rename 'common' to 'dmadev'
The mv_xor_device structure embeds a 'struct dma_device', which is
named 'common', a not very meaningful name. Rename it to 'dmadev',
which will help avoid confusions later as we merge the mv_xor_device
and mv_xor_chan structures together.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:59 +01:00
Thomas Petazzoni 98817b9959 dma: mv_xor: in mv_xor_chan, rename 'common' to 'dmachan'
The mv_xor_chan structure embeds a 'struct dma_chan', which is named
'common', a not very meaningful name. Rename it to 'dmachan', which
will help avoid confusions later as we merge the mv_xor_device and
mv_xor_chan structures together.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:58 +01:00
Thomas Petazzoni ecde6cd492 dma: mv_xor: get rid of the pdev pointer in mv_xor_device
It was only used in places where we could get the 'struct device *'
pointer through a different way.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:58 +01:00
Thomas Petazzoni 8b5c3f6c8d dma: mv_xor: remove unused id field in mv_xor_device structure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:58 +01:00
Thomas Petazzoni 61971656ce dma: mv_xor: rename many symbols to remove the 'shared' word
The 'shared' word no longer makes sense in a number of places as we
renamed the 'mv_xor_shared' driver to 'mv_xor'.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:57 +01:00
Thomas Petazzoni 60d151f387 dma: mv_xor: allow channels to be registered directly from the main device
Extend the XOR engine driver (currently called "mv_xor_shared") so
that XOR channels can be passed in the platform_data structure, and be
registered from there.

This will allow the users of the driver to be converted to the single
platform_driver variant of the mv_xor driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:56 +01:00
Thomas Petazzoni 09f2b7864c dma: mv_xor: do not use pool_size from platform_data within the driver
The driver currently pokes into the platform_data structure during its
normal operation to get the pool_size value. Poking into the
platform_data structure is not nice when moving to the Device Tree, so
this commit adds a new pool_size field in the mv_xor_device structure,
which gets initialized at ->probe() time. The driver then uses this
field instead of the platform_data.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-11-20 15:58:55 +01:00
Andrew Lunn c510182b1c ARM: Orion: XOR: Add support for clk
Some orion platforms can gate the XOR driver clock. If the clock
exisits, unable/disable it as appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-08 16:34:02 -07:00
Russell King - ARM Linux 4d4e58de32 dmaengine: move last completed cookie into generic dma_chan structure
Every DMA engine implementation declares a last completed dma cookie
in their private dma channel structures.  This is pointless, and
forces driver specific code.  Move this out into the common dma_chan
structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:36:06 +05:30
Russell King - ARM Linux 08714f60b0 dmaengine: mv_xor: remove write-only is_complete_cookie
mv_xor's is_complete_cookie is only ever written to, but never read.
This is silly, remove the write-only structure member.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13 11:35:40 +05:30
Dan Williams 64203b6727 mv_xor: implement a private tx_list
Drop mv_xor's use of tx_list from struct dma_async_tx_descriptor in
preparation for removal of this field.

Cc: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:53:03 -07:00
Saeed Bishara ff7b04796d dmaengine: DMA engine driver for Marvell XOR engine
The XOR engine found in Marvell's SoCs and system controllers
provides XOR and DMA operation, iSCSI CRC32C calculation, memory
initialization, and memory ECC error cleanup operation support.

This driver implements the DMA engine API and supports the following
capabilities:
- memcpy
- xor
- memset

The XOR engine can be used by DMA engine clients implemented in the
kernel, one of those clients is the RAID module.  In that case, I
observed 20% improvement in the raid5 write throughput, and 40%
decrease in the CPU utilization when doing array construction, those
results obtained on an 5182 running at 500Mhz.

When enabling the NET DMA client, the performance decreased, so
meanwhile it is recommended to keep this client off.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:58:36 -07:00