Commit Graph

170 Commits

Author SHA1 Message Date
Randy Dunlap 0fb0624b15 seccomp: fix kernel-doc function name warning
Move the ACTION_ONLY() macro so that it is not between the kernel-doc
notation and the function definition for seccomp_run_filters(),
eliminating a kernel-doc warning:

kernel/seccomp.c:400: warning: expecting prototype for seccomp_run_filters(). Prototype was for ACTION_ONLY() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230108021228.15975-1-rdunlap@infradead.org
2023-01-13 17:01:06 -08:00
Sargun Dhillon c2aa2dfef2 seccomp: Add wait_killable semantic to seccomp user notifier
This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV)
that makes it so that when notifications are received by the supervisor the
notifying process will transition to wait killable semantics. Although wait
killable isn't a set of semantics formally exposed to userspace, the
concept is searchable. If the notifying process is signaled prior to the
notification being received by the userspace agent, it will be handled as
normal.

One quirk about how this is handled is that the notifying process
only switches to TASK_KILLABLE if it receives a wakeup from either
an addfd or a signal. This is to avoid an unnecessary wakeup of
the notifying task.

The reasons behind switching into wait_killable only after userspace
receives the notification are:
* Avoiding unncessary work - Often, workloads will perform work that they
  may abort (request racing comes to mind). This allows for syscalls to be
  aborted safely prior to the notification being received by the
  supervisor. In this, the supervisor doesn't end up doing work that the
  workload does not want to complete anyways.
* Avoiding side effects - We don't want the syscall to be interruptible
  once the supervisor starts doing work because it may not be trivial
  to reverse the operation. For example, unmounting a file system may
  take a long time, and it's hard to rollback, or treat that as
  reentrant.
* Avoid breaking runtimes - Various runtimes do not GC when they are
  during a syscall (or while running native code that subsequently
  calls a syscall). If many notifications are blocked, and not picked
  up by the supervisor, this can get the application into a bad state.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 14:11:58 -07:00
Sargun Dhillon 4cbf6f6211 seccomp: Use FIFO semantics to order notifications
Previously, the seccomp notifier used LIFO semantics, where each
notification would be added on top of the stack, and notifications
were popped off the top of the stack. This could result one process
that generates a large number of notifications preventing other
notifications from being handled. This patch moves from LIFO (stack)
semantics to FIFO (queue semantics).

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-1-sargun@sargun.me
2022-04-29 11:30:54 -07:00
Linus Torvalds 1930a6e739 ptrace: Cleanups for v5.18
This set of changes removes tracehook.h, moves modification of all of
 the ptrace fields inside of siglock to remove races, adds a missing
 permission check to ptrace.c
 
 The removal of tracehook.h is quite significant as it has been a major
 source of confusion in recent years.  Much of that confusion was
 around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
 making the semantics clearer).
 
 For people who don't know tracehook.h is a vestiage of an attempt to
 implement uprobes like functionality that was never fully merged, and
 was later superseeded by uprobes when uprobes was merged.  For many
 years now we have been removing what tracehook functionaly a little
 bit at a time.  To the point where now anything left in tracehook.h is
 some weird strange thing that is difficult to understand.
 
 Eric W. Biederman (15):
       ptrace: Move ptrace_report_syscall into ptrace.h
       ptrace/arm: Rename tracehook_report_syscall report_syscall
       ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
       ptrace: Remove arch_syscall_{enter,exit}_tracehook
       ptrace: Remove tracehook_signal_handler
       task_work: Remove unnecessary include from posix_timers.h
       task_work: Introduce task_work_pending
       task_work: Call tracehook_notify_signal from get_signal on all architectures
       task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
       signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
       resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
       resume_user_mode: Move to resume_user_mode.h
       tracehook: Remove tracehook.h
       ptrace: Move setting/clearing ptrace_message into ptrace_stop
       ptrace: Return the signal to continue with from ptrace_stop
 
 Jann Horn (1):
       ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
 
 Yang Li (1):
       ptrace: Remove duplicated include in ptrace.c
 
  MAINTAINERS                          |   1 -
  arch/Kconfig                         |   5 +-
  arch/alpha/kernel/ptrace.c           |   5 +-
  arch/alpha/kernel/signal.c           |   4 +-
  arch/arc/kernel/ptrace.c             |   5 +-
  arch/arc/kernel/signal.c             |   4 +-
  arch/arm/kernel/ptrace.c             |  12 +-
  arch/arm/kernel/signal.c             |   4 +-
  arch/arm64/kernel/ptrace.c           |  14 +--
  arch/arm64/kernel/signal.c           |   4 +-
  arch/csky/kernel/ptrace.c            |   5 +-
  arch/csky/kernel/signal.c            |   4 +-
  arch/h8300/kernel/ptrace.c           |   5 +-
  arch/h8300/kernel/signal.c           |   4 +-
  arch/hexagon/kernel/process.c        |   4 +-
  arch/hexagon/kernel/signal.c         |   1 -
  arch/hexagon/kernel/traps.c          |   6 +-
  arch/ia64/kernel/process.c           |   4 +-
  arch/ia64/kernel/ptrace.c            |   6 +-
  arch/ia64/kernel/signal.c            |   1 -
  arch/m68k/kernel/ptrace.c            |   5 +-
  arch/m68k/kernel/signal.c            |   4 +-
  arch/microblaze/kernel/ptrace.c      |   5 +-
  arch/microblaze/kernel/signal.c      |   4 +-
  arch/mips/kernel/ptrace.c            |   5 +-
  arch/mips/kernel/signal.c            |   4 +-
  arch/nds32/include/asm/syscall.h     |   2 +-
  arch/nds32/kernel/ptrace.c           |   5 +-
  arch/nds32/kernel/signal.c           |   4 +-
  arch/nios2/kernel/ptrace.c           |   5 +-
  arch/nios2/kernel/signal.c           |   4 +-
  arch/openrisc/kernel/ptrace.c        |   5 +-
  arch/openrisc/kernel/signal.c        |   4 +-
  arch/parisc/kernel/ptrace.c          |   7 +-
  arch/parisc/kernel/signal.c          |   4 +-
  arch/powerpc/kernel/ptrace/ptrace.c  |   8 +-
  arch/powerpc/kernel/signal.c         |   4 +-
  arch/riscv/kernel/ptrace.c           |   5 +-
  arch/riscv/kernel/signal.c           |   4 +-
  arch/s390/include/asm/entry-common.h |   1 -
  arch/s390/kernel/ptrace.c            |   1 -
  arch/s390/kernel/signal.c            |   5 +-
  arch/sh/kernel/ptrace_32.c           |   5 +-
  arch/sh/kernel/signal_32.c           |   4 +-
  arch/sparc/kernel/ptrace_32.c        |   5 +-
  arch/sparc/kernel/ptrace_64.c        |   5 +-
  arch/sparc/kernel/signal32.c         |   1 -
  arch/sparc/kernel/signal_32.c        |   4 +-
  arch/sparc/kernel/signal_64.c        |   4 +-
  arch/um/kernel/process.c             |   4 +-
  arch/um/kernel/ptrace.c              |   5 +-
  arch/x86/kernel/ptrace.c             |   1 -
  arch/x86/kernel/signal.c             |   5 +-
  arch/x86/mm/tlb.c                    |   1 +
  arch/xtensa/kernel/ptrace.c          |   5 +-
  arch/xtensa/kernel/signal.c          |   4 +-
  block/blk-cgroup.c                   |   2 +-
  fs/coredump.c                        |   1 -
  fs/exec.c                            |   1 -
  fs/io-wq.c                           |   6 +-
  fs/io_uring.c                        |  11 +-
  fs/proc/array.c                      |   1 -
  fs/proc/base.c                       |   1 -
  include/asm-generic/syscall.h        |   2 +-
  include/linux/entry-common.h         |  47 +-------
  include/linux/entry-kvm.h            |   2 +-
  include/linux/posix-timers.h         |   1 -
  include/linux/ptrace.h               |  81 ++++++++++++-
  include/linux/resume_user_mode.h     |  64 ++++++++++
  include/linux/sched/signal.h         |  17 +++
  include/linux/task_work.h            |   5 +
  include/linux/tracehook.h            | 226 -----------------------------------
  include/uapi/linux/ptrace.h          |   2 +-
  kernel/entry/common.c                |  19 +--
  kernel/entry/kvm.c                   |   9 +-
  kernel/exit.c                        |   3 +-
  kernel/livepatch/transition.c        |   1 -
  kernel/ptrace.c                      |  47 +++++---
  kernel/seccomp.c                     |   1 -
  kernel/signal.c                      |  62 +++++-----
  kernel/task_work.c                   |   4 +-
  kernel/time/posix-cpu-timers.c       |   1 +
  mm/memcontrol.c                      |   2 +-
  security/apparmor/domain.c           |   1 -
  security/selinux/hooks.c             |   1 -
  85 files changed, 372 insertions(+), 495 deletions(-)
 
 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEgjlraLDcwBA2B+6cC/v6Eiajj0AFAmJCQkoACgkQC/v6Eiaj
 j0DCWQ/5AZVFU+hX32obUNCLackHTwgcCtSOs3JNBmNA/zL/htPiYYG0ghkvtlDR
 Dw5J5DnxC6P7PVAdAqrpvx2uX2FebHYU0bRlyLx8LYUEP5dhyNicxX9jA882Z+vw
 Ud0Ue9EojwGWS76dC9YoKUj3slThMATbhA2r4GVEoof8fSNJaBxQIqath44t0FwU
 DinWa+tIOvZANGBZr6CUUINNIgqBIZCH/R4h6ArBhMlJpuQ5Ufk2kAaiWFwZCkX4
 0LuuAwbKsCKkF8eap5I2KrIg/7zZVgxAg9O3cHOzzm8OPbKzRnNnQClcDe8perqp
 S6e/f3MgpE+eavd1EiLxevZ660cJChnmikXVVh8ZYYoefaMKGqBaBSsB38bNcLjY
 3+f2dB+TNBFRnZs1aCujK3tWBT9QyjZDKtCBfzxDNWBpXGLhHH6j6lA5Lj+Cef5K
 /HNHFb+FuqedlFZh5m1Y+piFQ70hTgCa2u8b+FSOubI2hW9Zd+WzINV0ANaZ2LvZ
 4YGtcyDNk1q1+c87lxP9xMRl/xi6rNg+B9T2MCo4IUnHgpSVP6VEB3osgUmrrrN0
 eQlUI154G/AaDlqXLgmn1xhRmlPGfmenkxpok1AuzxvNJsfLKnpEwQSc13g3oiZr
 disZQxNY0kBO2Nv3G323Z6PLinhbiIIFez6cJzK5v0YJ2WtO3pY=
 =uEro
 -----END PGP SIGNATURE-----

Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace cleanups from Eric Biederman:
 "This set of changes removes tracehook.h, moves modification of all of
  the ptrace fields inside of siglock to remove races, adds a missing
  permission check to ptrace.c

  The removal of tracehook.h is quite significant as it has been a major
  source of confusion in recent years. Much of that confusion was around
  task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
  semantics clearer).

  For people who don't know tracehook.h is a vestiage of an attempt to
  implement uprobes like functionality that was never fully merged, and
  was later superseeded by uprobes when uprobes was merged. For many
  years now we have been removing what tracehook functionaly a little
  bit at a time. To the point where anything left in tracehook.h was
  some weird strange thing that was difficult to understand"

* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: Remove duplicated include in ptrace.c
  ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
  ptrace: Return the signal to continue with from ptrace_stop
  ptrace: Move setting/clearing ptrace_message into ptrace_stop
  tracehook: Remove tracehook.h
  resume_user_mode: Move to resume_user_mode.h
  resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
  signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
  task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
  task_work: Call tracehook_notify_signal from get_signal on all architectures
  task_work: Introduce task_work_pending
  task_work: Remove unnecessary include from posix_timers.h
  ptrace: Remove tracehook_signal_handler
  ptrace: Remove arch_syscall_{enter,exit}_tracehook
  ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
  ptrace/arm: Rename tracehook_report_syscall report_syscall
  ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-28 17:29:53 -07:00
Eric W. Biederman 355f841a3f tracehook: Remove tracehook.h
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.

Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-03-10 16:51:51 -06:00
Kees Cook 495ac3069a seccomp: Invalidate seccomp mode to catch death failures
If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140 ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2022-02-10 19:09:12 -08:00
Linus Torvalds bcfeebbff3 Merge branch 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
 "In preparation of doing something about PTRACE_EVENT_EXIT I have
  started cleaning up various pieces of code related to do_exit. Most of
  that code I did not manage to get tested and reviewed before the merge
  window opened but a handful of very useful cleanups are ready to be
  merged.

  The first change is simply the removal of the bdflush system call. The
  code has now been disabled long enough that even the oldest userspace
  working userspace setups anyone can find to test are fine with the
  bdflush system call being removed.

  Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
  calling do_exit directly is interesting only in that it is nearly the
  most difficult of the incorrect uses of do_exit to remove.

  The change to the seccomp code to simply send a signal instead of
  calling do_coredump directly is a very nice little cleanup made
  possible by realizing the existing signal sending helpers were missing
  a little bit of functionality that is easy to provide"

* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal/seccomp: Dump core when there is only one live thread
  signal/seccomp: Refactor seccomp signal and coredump generation
  signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
  exit/bdflush: Remove the deprecated bdflush system call
2021-09-01 14:52:05 -07:00
Eric W. Biederman d21918e5a9 signal/seccomp: Dump core when there is only one live thread
Replace get_nr_threads with atomic_read(&current->signal->live) as
that is a more accurate number that is decremented sooner.

Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87lf6z6qbd.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-08-26 18:06:41 -05:00
Eric W. Biederman 307d522f5e signal/seccomp: Refactor seccomp signal and coredump generation
Factor out force_sig_seccomp from the seccomp signal generation and
place it in kernel/signal.c.  The function force_sig_seccomp takes a
parameter force_coredump to indicate that the sigaction field should
be reset to SIGDFL so that a coredump will be generated when the
signal is delivered.

force_sig_seccomp is then used to replace both seccomp_send_sigsys
and seccomp_init_siginfo.

force_sig_info_to_task gains an extra parameter to force using
the default signal action.

With this change seccomp is no longer a special case and there
becomes exactly one place do_coredump is called from.

Further it no longer becomes necessary for __seccomp_filter
to call do_group_exit.

Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87r1gr6qc4.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-08-26 10:30:12 -05:00
Hsuan-Chi Kuo b4d8a58f8d seccomp: Fix setting loaded filter count during TSYNC
The desired behavior is to set the caller's filter count to thread's.
This value is reported via /proc, so this fixes the inaccurate count
exposed to userspace; it is not used for reference counting, etc.

Signed-off-by: Hsuan-Chi Kuo <hsuanchikuo@gmail.com>
Link: https://lore.kernel.org/r/20210304233708.420597-1-hsuanchikuo@gmail.com
Co-developed-by: Wiktor Garbacz <wiktorg@google.com>
Signed-off-by: Wiktor Garbacz <wiktorg@google.com>
Link: https://lore.kernel.org/lkml/20210810125158.329849-1-wiktorg@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Fixes: c818c03b66 ("seccomp: Report number of loaded filters in /proc/$pid/status")
2021-08-11 11:48:28 -07:00
Rodrigo Campos 0ae71c7720 seccomp: Support atomic "addfd + send reply"
Alban Crequy reported a race condition userspace faces when we want to
add some fds and make the syscall return them[1] using seccomp notify.

The problem is that currently two different ioctl() calls are needed by
the process handling the syscalls (agent) for another userspace process
(target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and
SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible
for the agent to do the first ioctl to add a file descriptor but the
target is interrupted (EINTR) before the agent does the second ioctl()
call.

This patch adds a flag to the ADDFD ioctl() so it adds the fd and
returns that value atomically to the target program, as suggested by
Kees Cook[2]. This is done by simply allowing
seccomp_do_user_notification() to add the fd and return it in this case.
Therefore, in this case the target wakes up from the wait in
seccomp_do_user_notification() either to interrupt the syscall or to add
the fd and return it.

This "allocate an fd and return" functionality is useful for syscalls
that return a file descriptor only, like connect(2). Other syscalls that
return a file descriptor but not as return value (or return more than
one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not
work with this flag.

This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and
SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's
return value, nor error can be set by the user. Upon successful invocation
of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND
flag, the notifying process's errno will be 0, and the return value will
be the file descriptor number that was installed.

[1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/

Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-06-28 12:49:52 -07:00
Sargun Dhillon ddc4739169 seccomp: Refactor notification handler to prepare for new semantics
This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.

Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].

[1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/

Fixes: 7cf97b1254 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Rodrigo Campos <rodrigo@kinvolk.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
2021-05-29 11:13:27 -07:00
Linus Torvalds 23806a3e96 Merge branch 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull receive_fd update from Al Viro:
 "Cleanup of receive_fd mess"

* 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: split receive_fd_replace from __receive_fd
2021-05-03 11:05:28 -07:00
Christoph Hellwig 42eb0d54c0 fs: split receive_fd_replace from __receive_fd
receive_fd_replace shares almost no code with the general case, so split
it out.  Also remove the "Bump the sock usage counts" comment from
both copies, as that is now what __receive_sock actually does.

[AV: ... and make the only user of receive_fd_replace() choose between
it and receive_fd() according to what userland had passed to it in
flags]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-04-16 00:13:04 -04:00
Cui GaoSheng a3fc712c5b seccomp: Fix "cacheable" typo in comments
Do a trivial typo fix: s/cachable/cacheable/

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Cui GaoSheng <cuigaosheng1@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210331030724.84419-1-cuigaosheng1@huawei.com
2021-03-30 22:34:30 -07:00
wanghongzhe a381b70a1c seccomp: Improve performace by optimizing rmb()
According to Kees's suggest, we started with the patch that just replaces
rmb() with smp_rmb() and did a performance test with UnixBench. The
results showed the overhead about 2.53% in rmb() test compared to the
smp_rmb() one, in a x86-64 kernel with CONFIG_SMP enabled running inside a
qemu-kvm vm. The test is a "syscall" testcase in UnixBench, which executes
5 syscalls in a loop during a certain timeout (100 second in our test) and
counts the total number of executions of this 5-syscall sequence. We set
a seccomp filter with all allow rule for all used syscalls in this test
(which will go bitmap path) to make sure the rmb() will be executed. The
details for the test:

with rmb():
/txm # ./syscall_allow_min 100
COUNT|35861159|1|lps
/txm # ./syscall_allow_min 100
COUNT|35545501|1|lps
/txm # ./syscall_allow_min 100
COUNT|35664495|1|lps

with smp_rmb():
/txm # ./syscall_allow_min 100
COUNT|36552771|1|lps
/txm # ./syscall_allow_min 100
COUNT|36491247|1|lps
/txm # ./syscall_allow_min 100
COUNT|36504746|1|lps

For a x86-64 kernel with CONFIG_SMP enabled, the smp_rmb() is just a
compiler barrier() which have no impact in runtime, while rmb() is a
lfence which will prevent all memory access operations (not just load
according the recently claim by Intel) behind itself. We can also figure
it out in disassembly:

with rmb():
0000000000001430 <__seccomp_filter>:
    1430:   41 57                   push   %r15
    1432:   41 56                   push   %r14
    1434:   41 55                   push   %r13
    1436:   41 54                   push   %r12
    1438:   55                      push   %rbp
    1439:   53                      push   %rbx
    143a:   48 81 ec 90 00 00 00    sub    $0x90,%rsp
    1441:   89 7c 24 10             mov    %edi,0x10(%rsp)
    1445:   89 54 24 14             mov    %edx,0x14(%rsp)
    1449:   65 48 8b 04 25 28 00    mov    %gs:0x28,%rax
    1450:   00 00
    1452:   48 89 84 24 88 00 00    mov    %rax,0x88(%rsp)
    1459:   00
    145a:   31 c0                   xor    %eax,%eax
*   145c:   0f ae e8                lfence
    145f:   48 85 f6                test   %rsi,%rsi
    1462:   49 89 f4                mov    %rsi,%r12
    1465:   0f 84 42 03 00 00       je     17ad <__seccomp_filter+0x37d>
    146b:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
    1472:   00 00
    1474:   48 8b 98 80 07 00 00    mov    0x780(%rax),%rbx
    147b:   48 85 db                test   %rbx,%rbx

with smp_rmb();
0000000000001430 <__seccomp_filter>:
    1430:   41 57                   push   %r15
    1432:   41 56                   push   %r14
    1434:   41 55                   push   %r13
    1436:   41 54                   push   %r12
    1438:   55                      push   %rbp
    1439:   53                      push   %rbx
    143a:   48 81 ec 90 00 00 00    sub    $0x90,%rsp
    1441:   89 7c 24 10             mov    %edi,0x10(%rsp)
    1445:   89 54 24 14             mov    %edx,0x14(%rsp)
    1449:   65 48 8b 04 25 28 00    mov    %gs:0x28,%rax
    1450:   00 00
    1452:   48 89 84 24 88 00 00    mov    %rax,0x88(%rsp)
    1459:   00
    145a:   31 c0                   xor    %eax,%eax
    145c:   48 85 f6                test   %rsi,%rsi
    145f:   49 89 f4                mov    %rsi,%r12
    1462:   0f 84 42 03 00 00       je     17aa <__seccomp_filter+0x37a>
    1468:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
    146f:   00 00
    1471:   48 8b 98 80 07 00 00    mov    0x780(%rax),%rbx
    1478:   48 85 db                test   %rbx,%rbx

Signed-off-by: wanghongzhe <wanghongzhe@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1612496049-32507-1-git-send-email-wanghongzhe@huawei.com
2021-02-10 12:40:11 -08:00
Paul Cercueil 04b38d0125 seccomp: Add missing return in non-void function
We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.

Fixes: 8112c4f140 ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210111172839.640914-1-paul@crapouillou.net
2021-01-11 12:05:14 -08:00
Linus Torvalds e994cc240a seccomp updates for v5.11-rc1
- Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook)
 
 - Fix bogus __user annotations (Jann Horn)
 
 - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl/ZG5IACgkQiXL039xt
 wCbhuw/+P77jwT/p1DRnKp5vG7TXTqqXrdhQZYNyBUxRaKSGCEMydvJn/h3KscyW
 4eEy9vZKTAhIQg5oI5OXZ9jxzFdpxEg8lMPSKReNEga3d0//H9gOJHYc782D/bf1
 +6x6I4qWv+LMM/52P60gznBH+3WFVtyM5Jw+LF5igOCEVSERoZ3ChsmdSZgkALG0
 DJXKL+Dy1Wj9ESeBtuh1UsKoh4ADTAoPC+LvfGuxn2T+VtnxX/sOSDkkrpHfX+2J
 UKkIgWJHeNmq74nwWjpNuDz24ARTiVWOVQX01nOHRohtu39TZcpU774Pdp4Dsj2W
 oDDwOzIWp4/27aQxkOKv6NXMwd29XbrpH1gweyuvQh9cohSbzx6qZlXujqyd9izs
 6Nh74mvC3cns6sQWSWz5ddU4dMQ4rNjpD2CK1P8A7ZVTfH+5baaPmF8CRp126E6f
 /MAUk7Rfbe6YfYdfMwhXXhTvus0e5yenGFXr46gasJDfGnyy4cLS/MO7AZ+mR0CB
 d9DnrsIJVggL5cZ2LZmivIng18JWnbkgnenmHSXahdLstmYVkdpo4ckBl1G/dXK0
 lDmi9j9FoTxB6OrztEKA0RZB+C1e6q7X7euwsHjgF9XKgD5S+DdeYwqd2lypjyvb
 d9VNLFdngD0CRY7wcJZKRma+yPemlPNurdMjF9LrqaAu232G1UA=
 =jJwG
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp updates from Kees Cook:
 "The major change here is finally gaining seccomp constant-action
  bitmaps, which internally reduces the seccomp overhead for many
  real-world syscall filters to O(1), as discussed at Plumbers this
  year.

   - Improve seccomp performance via constant-action bitmaps (YiFei Zhu
     & Kees Cook)

   - Fix bogus __user annotations (Jann Horn)

   - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)"

* tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Update kernel config
  seccomp: Remove bogus __user annotations
  seccomp/cache: Report cache data through /proc/pid/seccomp_cache
  xtensa: Enable seccomp architecture tracking
  sh: Enable seccomp architecture tracking
  s390: Enable seccomp architecture tracking
  riscv: Enable seccomp architecture tracking
  powerpc: Enable seccomp architecture tracking
  parisc: Enable seccomp architecture tracking
  csky: Enable seccomp architecture tracking
  arm: Enable seccomp architecture tracking
  arm64: Enable seccomp architecture tracking
  selftests/seccomp: Compare bitmap vs filter overhead
  x86: Enable seccomp architecture tracking
  seccomp/cache: Add "emulator" to check if filter is constant allow
  seccomp/cache: Lookup syscall allowlist bitmap for fast path
2020-12-16 11:30:10 -08:00
Linus Torvalds 1ac0884d54 A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
 
  - The consolidation work to reclaim TIF flags on x86 and also for non-x86
    specific TIF flags which are solely relevant for syscall related work
    and have been moved into their own storage space. The x86 specific part
    had to be merged in to avoid a major conflict.
 
  - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
    delivery mode of task work and results in an impressive performance
    improvement for io_uring. The non-x86 consolidation of this is going to
    come seperate via Jens.
 
  - The selective syscall redirection facility which provides a clean and
    efficient way to support the non-Linux syscalls of WINE by catching them
    at syscall entry and redirecting them to the user space emulation. This
    can be utilized for other purposes as well and has been designed
    carefully to avoid overhead for the regular fastpath. This includes the
    core changes and the x86 support code.
 
  - Simplification of the context tracking entry/exit handling for the users
    of the generic entry code which guarantee the proper ordering and
    protection.
 
  - Preparatory changes to make the generic entry code accomodate S390
    specific requirements which are mostly related to their syscall restart
    mechanism.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XoPoTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoe0tD/4jSKHIogVM9kVpiYfwjDGS1NluaBXn
 71ZoASbX9GZebyGandMyF2QP1iJ24ZO0RztBwHEVH6fyomKB2iFNedssCpO9yfWV
 3eFRpOvMpbszY2W2bd0QG3GrqaTttjVfB4ahkGLzqeSbchdob6hZpNDYtBZnujA6
 GSnrrurfJkCGoQny+yJQYdQJXQU+BIX90B2a2Q+jW123Luy/iHXC1f/krZSA1m14
 fC9xYLSUjPphTzh2ZOW+C3DgdjOL5PfAm/6F+DArt4GtLgrEGD7R74aLSFhvetky
 dn5QtG+yAsz1i0cc5Wu/JBcT9tOkY92rPYSyLI9bYQUSQ/bMyuprz6oYKj3dubsu
 ZSsKPdkNFPIniL4fLdCMWZcIXX5xgnrxKjdgXZXW3gtrcxSns8w8uED3Sh7dgE08
 pgIeq67E5g/OB8kJXH1VxdewmeQb9cOmnzzHwNO7TrrGbBKjDTYHNdYOKf1dUTTK
 ZX1UjLfGwxTkMYAbQD1k0JGZ2OLRshzSaH5BW/ZKa3bvJW6yYOq+/YT8B8hbJ8U3
 vThlO75/55IJxS5r5Y3vZd/IHdsYbPuETD+TA8tNYtPqNZasW8nnk4TYctWqzDuO
 /Ka1wvWYid3c6ySznQn4zSyRjr968AfHeZ9YTUMhWufy5waXVmdBMG41u3IKfsVt
 osyzNc4EK19/Mg==
 =hsjV
 -----END PGP SIGNATURE-----

Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core entry/exit updates from Thomas Gleixner:
 "A set of updates for entry/exit handling:

   - More generalization of entry/exit functionality

   - The consolidation work to reclaim TIF flags on x86 and also for
     non-x86 specific TIF flags which are solely relevant for syscall
     related work and have been moved into their own storage space. The
     x86 specific part had to be merged in to avoid a major conflict.

   - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
     delivery mode of task work and results in an impressive performance
     improvement for io_uring. The non-x86 consolidation of this is
     going to come seperate via Jens.

   - The selective syscall redirection facility which provides a clean
     and efficient way to support the non-Linux syscalls of WINE by
     catching them at syscall entry and redirecting them to the user
     space emulation. This can be utilized for other purposes as well
     and has been designed carefully to avoid overhead for the regular
     fastpath. This includes the core changes and the x86 support code.

   - Simplification of the context tracking entry/exit handling for the
     users of the generic entry code which guarantee the proper ordering
     and protection.

   - Preparatory changes to make the generic entry code accomodate S390
     specific requirements which are mostly related to their syscall
     restart mechanism"

* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  entry: Add syscall_exit_to_user_mode_work()
  entry: Add exit_to_user_mode() wrapper
  entry_Add_enter_from_user_mode_wrapper
  entry: Rename exit_to_user_mode()
  entry: Rename enter_from_user_mode()
  docs: Document Syscall User Dispatch
  selftests: Add benchmark for syscall user dispatch
  selftests: Add kselftest for syscall user dispatch
  entry: Support Syscall User Dispatch on common syscall entry
  kernel: Implement selective syscall userspace redirection
  signal: Expose SYS_USER_DISPATCH si_code type
  x86: vdso: Expose sigreturn address on vdso to the kernel
  MAINTAINERS: Add entry for common entry code
  entry: Fix boot for !CONFIG_GENERIC_ENTRY
  x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
  context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
  sched: Detect call to schedule from critical entry code
  context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
  context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
  x86: Reclaim unused x86 TI flags
  ...
2020-12-14 17:13:53 -08:00
Kees Cook 7ef95e3dbc Merge branch 'for-linus/seccomp' into for-next/seccomp 2020-11-20 11:39:39 -08:00
Jann Horn fab686eb03 seccomp: Remove bogus __user annotations
Buffers that are passed to read_actions_logged() and write_actions_logged()
are in kernel memory; the sysctl core takes care of copying from/to
userspace.

Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201120170545.1419332-1-jannh@google.com
2020-11-20 11:39:21 -08:00
YiFei Zhu 0d8315dddd seccomp/cache: Report cache data through /proc/pid/seccomp_cache
Currently the kernel does not provide an infrastructure to translate
architecture numbers to a human-readable name. Translating syscall
numbers to syscall names is possible through FTRACE_SYSCALL
infrastructure but it does not provide support for compat syscalls.

This will create a file for each PID as /proc/pid/seccomp_cache.
The file will be empty when no seccomp filters are loaded, or be
in the format of:
<arch name> <decimal syscall number> <ALLOW | FILTER>
where ALLOW means the cache is guaranteed to allow the syscall,
and filter means the cache will pass the syscall to the BPF filter.

For the docker default profile on x86_64 it looks like:
x86_64 0 ALLOW
x86_64 1 ALLOW
x86_64 2 ALLOW
x86_64 3 ALLOW
[...]
x86_64 132 ALLOW
x86_64 133 ALLOW
x86_64 134 FILTER
x86_64 135 FILTER
x86_64 136 FILTER
x86_64 137 ALLOW
x86_64 138 ALLOW
x86_64 139 FILTER
x86_64 140 ALLOW
x86_64 141 ALLOW
[...]

This file is guarded by CONFIG_SECCOMP_CACHE_DEBUG with a default
of N because I think certain users of seccomp might not want the
application to know which syscalls are definitely usable. For
the same reason, it is also guarded by CAP_SYS_ADMIN.

Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/lkml/CAG48ez3Ofqp4crXGksLmZY6=fGrF_tWyUCg7PBkAetvbbOPeOA@mail.gmail.com/
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/94e663fa53136f5a11f432c661794d1ee7060779.1605101222.git.yifeifz2@illinois.edu
2020-11-20 11:16:35 -08:00
YiFei Zhu 8e01b51a31 seccomp/cache: Add "emulator" to check if filter is constant allow
SECCOMP_CACHE will only operate on syscalls that do not access
any syscall arguments or instruction pointer. To facilitate
this we need a static analyser to know whether a filter will
return allow regardless of syscall arguments for a given
architecture number / syscall number pair. This is implemented
here with a pseudo-emulator, and stored in a per-filter bitmap.

In order to build this bitmap at filter attach time, each filter is
emulated for every syscall (under each possible architecture), and
checked for any accesses of struct seccomp_data that are not the "arch"
nor "nr" (syscall) members. If only "arch" and "nr" are examined, and
the program returns allow, then we can be sure that the filter must
return allow independent from syscall arguments.

Nearly all seccomp filters are built from these cBPF instructions:

BPF_LD  | BPF_W    | BPF_ABS
BPF_JMP | BPF_JEQ  | BPF_K
BPF_JMP | BPF_JGE  | BPF_K
BPF_JMP | BPF_JGT  | BPF_K
BPF_JMP | BPF_JSET | BPF_K
BPF_JMP | BPF_JA
BPF_RET | BPF_K
BPF_ALU | BPF_AND  | BPF_K

Each of these instructions are emulated. Any weirdness or loading
from a syscall argument will cause the emulator to bail.

The emulation is also halted if it reaches a return. In that case,
if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good.

Emulator structure and comments are from Kees [1] and Jann [2].

Emulation is done at attach time. If a filter depends on more
filters, and if the dependee does not guarantee to allow the
syscall, then we skip the emulation of this syscall.

[1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/
[2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/

Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-11-20 11:16:34 -08:00
YiFei Zhu f9d480b6ff seccomp/cache: Lookup syscall allowlist bitmap for fast path
The overhead of running Seccomp filters has been part of some past
discussions [1][2][3]. Oftentimes, the filters have a large number
of instructions that check syscall numbers one by one and jump based
on that. Some users chain BPF filters which further enlarge the
overhead. A recent work [6] comprehensively measures the Seccomp
overhead and shows that the overhead is non-negligible and has a
non-trivial impact on application performance.

We observed some common filters, such as docker's [4] or
systemd's [5], will make most decisions based only on the syscall
numbers, and as past discussions considered, a bitmap where each bit
represents a syscall makes most sense for these filters.

The fast (common) path for seccomp should be that the filter permits
the syscall to pass through, and failing seccomp is expected to be
an exceptional case; it is not expected for userspace to call a
denylisted syscall over and over.

When it can be concluded that an allow must occur for the given
architecture and syscall pair (this determination is introduced in
the next commit), seccomp will immediately allow the syscall,
bypassing further BPF execution.

Each architecture number has its own bitmap. The architecture
number in seccomp_data is checked against the defined architecture
number constant before proceeding to test the bit against the
bitmap with the syscall number as the index of the bit in the
bitmap, and if the bit is set, seccomp returns allow. The bitmaps
are all clear in this patch and will be initialized in the next
commit.

When only one architecture exists, the check against architecture
number is skipped, suggested by Kees Cook [7].

[1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/
[2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/
[3] https://github.com/seccomp/libseccomp/issues/116
[4] ae0ef82b90/profiles/seccomp/default.json
[5] 6743a1caf4/src/shared/seccomp-util.c (L270)
[6] Draco: Architectural and Operating System Support for System Call Security
    https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020
[7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/

Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu>
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-11-20 11:16:34 -08:00
Mickaël Salaün fb14528e44 seccomp: Set PF_SUPERPRIV when checking capability
Replace the use of security_capable(current_cred(), ...) with
ns_capable_noaudit() which set PF_SUPERPRIV.

Since commit 98f368e9e2 ("kernel: Add noaudit variant of
ns_capable()"), a new ns_capable_noaudit() helper is available.  Let's
use it!

Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Fixes: e2cfabdfd0 ("seccomp: add system call filtering using BPF")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-3-mic@digikod.net
2020-11-17 12:53:22 -08:00
Gabriel Krisman Bertazi 23d67a5485 seccomp: Migrate to use SYSCALL_WORK flag
On architectures using the generic syscall entry code the architecture
independent syscall work is moved to flags in thread_info::syscall_work.
This removes architecture dependencies and frees up TIF bits.

Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert
the code which uses the TIF specific helper functions to use the new
*_syscall_work() helpers which either resolve to the new mode for users of
the generic entry code or to the TIF based functions for the other
architectures.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com
2020-11-16 21:53:15 +01:00
Jann Horn dfe719fef0 seccomp: Make duplicate listener detection non-racy
Currently, init_listener() tries to prevent adding a filter with
SECCOMP_FILTER_FLAG_NEW_LISTENER if one of the existing filters already
has a listener. However, this check happens without holding any lock that
would prevent another thread from concurrently installing a new filter
(potentially with a listener) on top of the ones we already have.

Theoretically, this is also a data race: The plain load from
current->seccomp.filter can race with concurrent writes to the same
location.

Fix it by moving the check into the region that holds the siglock to guard
against concurrent TSYNC.

(The "Fixes" tag points to the commit that introduced the theoretical
data race; concurrent installation of another filter with TSYNC only
became possible later, in commit 51891498f2 ("seccomp: allow TSYNC and
USER_NOTIF together").)

Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201005014401.490175-1-jannh@google.com
2020-10-08 13:17:47 -07:00
Denis Efremov 2d9ca267a9 seccomp: Use current_pt_regs() instead of task_pt_regs(current)
As described in commit a3460a5974 ("new helper: current_pt_regs()"):
- arch versions are "optimized versions".
- some architectures have task_pt_regs() working only for traced tasks
  blocked on signal delivery. current_pt_regs() needs to work for *all*
  processes.

In preparation for adding a coccinelle rule for using current_*(), instead
of raw accesses to current members, modify seccomp_do_user_notification(),
__seccomp_filter(), __secure_computing() to use current_pt_regs().

Signed-off-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20200824125921.488311-1-efremov@linux.com
[kees: Reworded commit log, add comment to populate_seccomp_data()]
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-08 16:26:45 -07:00
Rich Felker 4d671d922d seccomp: kill process instead of thread for unknown actions
Asynchronous termination of a thread outside of the userspace thread
library's knowledge is an unsafe operation that leaves the process in
an inconsistent, corrupt, and possibly unrecoverable state. In order
to make new actions that may be added in the future safe on kernels
not aware of them, change the default action from
SECCOMP_RET_KILL_THREAD to SECCOMP_RET_KILL_PROCESS.

Signed-off-by: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20200829015609.GA32566@brightrain.aerifal.cx
[kees: Fixed up coredump selection logic to match]
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-08 12:00:49 -07:00
Tycho Andersen e839317900 seccomp: don't leave dangling ->notif if file allocation fails
Christian and Kees both pointed out that this is a bit sloppy to open-code
both places, and Christian points out that we leave a dangling pointer to
->notif if file allocation fails. Since we check ->notif for null in order
to determine if it's ok to install a filter, this means people won't be
able to install a filter if the file allocation fails for some reason, even
if they subsequently should be able to.

To fix this, let's hoist this free+null into its own little helper and use
it.

Reported-by: Kees Cook <keescook@chromium.org>
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902140953.1201956-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-08 11:30:16 -07:00
Tycho Andersen a566a9012a seccomp: don't leak memory when filter install races
In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize
the listener fd, then check to see if we can actually use it later in
seccomp_may_assign_mode(), which can fail if anyone else in our thread
group has installed a filter and caused some divergence. If we can't, we
partially clean up the newly allocated file: we put the fd, put the file,
but don't actually clean up the *memory* that was allocated at
filter->notif. Let's clean that up too.

To accomplish this, let's hoist the actual "detach a notifier from a
filter" code to its own helper out of seccomp_notify_release(), so that in
case anyone adds stuff to init_listener(), they only have to add the
cleanup code in one spot. This does a bit of extra locking and such on the
failure path when the filter is not attached, but it's a slow failure path
anyway.

Fixes: 51891498f2 ("seccomp: allow TSYNC and USER_NOTIF together")
Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-09-08 11:19:50 -07:00
Sargun Dhillon 7cf97b1254 seccomp: Introduce addfd ioctl to seccomp user notifier
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).

While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).

However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.

The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.

As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.

[1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/
[2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/
[3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal

Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Jann Horn <jannh@google.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Suggested-by: Matt Denton <mpdenton@google.com>
Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Will Drewry <wad@chromium.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-14 16:29:42 -07:00
Kees Cook fe4bfff86e seccomp: Use -1 marker for end of mode 1 syscall list
The terminator for the mode 1 syscalls list was a 0, but that could be
a valid syscall number (e.g. x86_64 __NR_read). By luck, __NR_read was
listed first and the loop construct would not test it, so there was no
bug. However, this is fragile. Replace the terminator with -1 instead,
and make the variable name for mode 1 syscall lists more descriptive.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:52 -07:00
Kees Cook 47e33c05f9 seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.

Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:52 -07:00
Kees Cook e68f9d49dd seccomp: Use pr_fmt
Avoid open-coding "seccomp: " prefixes for pr_*() calls.

Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:52 -07:00
Christian Brauner 99cdb8b9a5 seccomp: notify about unused filter
We've been making heavy use of the seccomp notifier to intercept and
handle certain syscalls for containers. This patch allows a syscall
supervisor listening on a given notifier to be notified when a seccomp
filter has become unused.

A container is often managed by a singleton supervisor process the
so-called "monitor". This monitor process has an event loop which has
various event handlers registered. If the user specified a seccomp
profile that included a notifier for various syscalls then we also
register a seccomp notify even handler. For any container using a
separate pid namespace the lifecycle of the seccomp notifier is bound to
the init process of the pid namespace, i.e. when the init process exits
the filter must be unused.

If a new process attaches to a container we force it to assume a seccomp
profile. This can either be the same seccomp profile as the container
was started with or a modified one. If the attaching process makes use
of the seccomp notifier we will register a new seccomp notifier handler
in the monitor's event loop. However, when the attaching process exits
we can't simply delete the handler since other child processes could've
been created (daemons spawned etc.) that have inherited the seccomp
filter and so we need to keep the seccomp notifier fd alive in the event
loop. But this is problematic since we don't get a notification when the
seccomp filter has become unused and so we currently never remove the
seccomp notifier fd from the event loop and just keep accumulating fds
in the event loop. We've had this issue for a while but it has recently
become more pressing as more and larger users make use of this.

To fix this, we introduce a new "users" reference counter that tracks any
tasks and dependent filters making use of a filter. When a notifier is
registered waiting tasks will be notified that the filter is now empty
by receiving a (E)POLLHUP event.

The concept in this patch introduces is the same as for signal_struct,
i.e. reference counting for life-cycle management is decoupled from
reference counting taks using the object. There's probably some trickery
possible but the second counter is just the correct way of doing this
IMHO and has precedence.

Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Denton <mpdenton@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jann Horn <jannh@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Linux Containers <containers@lists.linux-foundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Christian Brauner 76194c4e83 seccomp: Lift wait_queue into struct seccomp_filter
Lift the wait_queue from struct notification into struct seccomp_filter.
This is cleaner overall and lets us avoid having to take the notifier
mutex in the future for EPOLLHUP notifications since we need to neither
read nor modify the notifier specific aspects of the seccomp filter. In
the exit path I'd very much like to avoid having to take the notifier mutex
for each filter in the task's filter hierarchy.

Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Denton <mpdenton@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jann Horn <jannh@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Linux Containers <containers@lists.linux-foundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Christian Brauner 3a15fb6ed9 seccomp: release filter after task is fully dead
The seccomp filter used to be released in free_task() which is called
asynchronously via call_rcu() and assorted mechanisms. Since we need
to inform tasks waiting on the seccomp notifier when a filter goes empty
we will notify them as soon as a task has been marked fully dead in
release_task(). To not split seccomp cleanup into two parts, move
filter release out of free_task() and into release_task() after we've
unhashed struct task from struct pid, exited signals, and unlinked it
from the threadgroups' thread list. We'll put the empty filter
notification infrastructure into it in a follow up patch.

This also renames put_seccomp_filter() to seccomp_filter_release() which
is a more descriptive name of what we're doing here especially once
we've added the empty filter notification mechanism in there.

We're also NULL-ing the task's filter tree entrypoint which seems
cleaner than leaving a dangling pointer in there. Note that this shouldn't
need any memory barriers since we're calling this when the task is in
release_task() which means it's EXIT_DEAD. So it can't modify its seccomp
filters anymore. You can also see this from the point where we're calling
seccomp_filter_release(). It's after __exit_signal() and at this point,
tsk->sighand will already have been NULLed which is required for
thread-sync and filter installation alike.

Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Denton <mpdenton@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jann Horn <jannh@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Linux Containers <containers@lists.linux-foundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Christian Brauner b707ddee11 seccomp: rename "usage" to "refs" and document
Naming the lifetime counter of a seccomp filter "usage" suggests a
little too strongly that its about tasks that are using this filter
while it also tracks other references such as the user notifier or
ptrace. This also updates the documentation to note this fact.

We'll be introducing an actual usage counter in a follow-up patch.

Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Denton <mpdenton@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jann Horn <jannh@google.com>
Cc: Chris Palmer <palmer@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Robert Sesek <rsesek@google.com>
Cc: Jeffrey Vander Stoep <jeffv@google.com>
Cc: Linux Containers <containers@lists.linux-foundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200531115031.391515-1-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Sargun Dhillon 9f87dcf14b seccomp: Add find_notification helper
This adds a helper which can iterate through a seccomp_filter to
find a notification matching an ID. It removes several replicated
chunks of code.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Cc: Matt Denton <mpdenton@google.com>
Cc: Kees Cook <keescook@google.com>,
Cc: Jann Horn <jannh@google.com>,
Cc: Robert Sesek <rsesek@google.com>,
Cc: Chris Palmer <palmer@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200601112532.150158-1-sargun@sargun.me
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Kees Cook c818c03b66 seccomp: Report number of loaded filters in /proc/$pid/status
A common question asked when debugging seccomp filters is "how many
filters are attached to your process?" Provide a way to easily answer
this question through /proc/$pid/status with a "Seccomp_filters" line.

Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-10 16:01:51 -07:00
Christoph Hellwig 32927393dc sysctl: pass kernel pointers to ->proc_handler
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from  userspace in common code.  This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-27 02:07:40 -04:00
Linus Torvalds 29d9f30d4c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Fix the iwlwifi regression, from Johannes Berg.

   2) Support BSS coloring and 802.11 encapsulation offloading in
      hardware, from John Crispin.

   3) Fix some potential Spectre issues in qtnfmac, from Sergey
      Matyukevich.

   4) Add TTL decrement action to openvswitch, from Matteo Croce.

   5) Allow paralleization through flow_action setup by not taking the
      RTNL mutex, from Vlad Buslov.

   6) A lot of zero-length array to flexible-array conversions, from
      Gustavo A. R. Silva.

   7) Align XDP statistics names across several drivers for consistency,
      from Lorenzo Bianconi.

   8) Add various pieces of infrastructure for offloading conntrack, and
      make use of it in mlx5 driver, from Paul Blakey.

   9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

  10) Lots of parallelization improvements during configuration changes
      in mlxsw driver, from Ido Schimmel.

  11) Add support to devlink for generic packet traps, which report
      packets dropped during ACL processing. And use them in mlxsw
      driver. From Jiri Pirko.

  12) Support bcmgenet on ACPI, from Jeremy Linton.

  13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
      Starovoitov, and your's truly.

  14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

  15) Fix sysfs permissions when network devices change namespaces, from
      Christian Brauner.

  16) Add a flags element to ethtool_ops so that drivers can more simply
      indicate which coalescing parameters they actually support, and
      therefore the generic layer can validate the user's ethtool
      request. Use this in all drivers, from Jakub Kicinski.

  17) Offload FIFO qdisc in mlxsw, from Petr Machata.

  18) Support UDP sockets in sockmap, from Lorenz Bauer.

  19) Fix stretch ACK bugs in several TCP congestion control modules,
      from Pengcheng Yang.

  20) Support virtual functiosn in octeontx2 driver, from Tomasz
      Duszynski.

  21) Add region operations for devlink and use it in ice driver to dump
      NVM contents, from Jacob Keller.

  22) Add support for hw offload of MACSEC, from Antoine Tenart.

  23) Add support for BPF programs that can be attached to LSM hooks,
      from KP Singh.

  24) Support for multiple paths, path managers, and counters in MPTCP.
      From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
      and others.

  25) More progress on adding the netlink interface to ethtool, from
      Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
  net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
  cxgb4/chcr: nic-tls stats in ethtool
  net: dsa: fix oops while probing Marvell DSA switches
  net/bpfilter: remove superfluous testing message
  net: macb: Fix handling of fixed-link node
  net: dsa: ksz: Select KSZ protocol tag
  netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
  net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
  net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
  net: stmmac: create dwmac-intel.c to contain all Intel platform
  net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
  net: dsa: bcm_sf2: Add support for matching VLAN TCI
  net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
  net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
  net: dsa: bcm_sf2: Disable learning for ASP port
  net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
  net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
  net: dsa: b53: Restore VLAN entries upon (re)configuration
  net: dsa: bcm_sf2: Fix overflow checks
  hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
  ...
2020-03-31 17:29:33 -07:00
Sven Schnelle 3db81afd99 seccomp: Add missing compat_ioctl for notify
Executing the seccomp_bpf testsuite under a 64-bit kernel with 32-bit
userland (both s390 and x86) doesn't work because there's no compat_ioctl
handler defined. Add the handler.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200310123332.42255-1-svens@linux.ibm.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-29 21:10:51 -07:00
Tycho Andersen 51891498f2 seccomp: allow TSYNC and USER_NOTIF together
The restriction introduced in 7a0df7fbc1 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).

Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.

So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.

Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-04 14:48:54 -08:00
David Miller 3d9f773cf2 bpf: Use bpf_prog_run_pin_on_cpu() at simple call sites.
All of these cases are strictly of the form:

	preempt_disable();
	BPF_PROG_RUN(...);
	preempt_enable();

Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN()
with:

	migrate_disable();
	BPF_PROG_RUN(...);
	migrate_enable();

On non RT enabled kernels this maps to preempt_disable/enable() and on RT
enabled kernels this solely prevents migration, which is sufficient as
there is no requirement to prevent reentrancy to any BPF program from a
preempting task. The only requirement is that the program stays on the same
CPU.

Therefore, this is a trivially correct transformation.

The seccomp loop does not need protection over the loop. It only needs
protection per BPF filter program

[ tglx: Converted to bpf_prog_run_pin_on_cpu() ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de
2020-02-24 16:20:09 -08:00
Sargun Dhillon 2882d53c9c seccomp: Check that seccomp_notif is zeroed out by the user
This patch is a small change in enforcement of the uapi for
SECCOMP_IOCTL_NOTIF_RECV ioctl. Specifically, the datastructure which
is passed (seccomp_notif) must be zeroed out. Previously any of its
members could be set to nonsense values, and we would ignore it.

This ensures all fields are set to their zero value.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191229062451.9467-2-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02 13:03:45 -08:00
Christian Brauner fb3c5386b3 seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE
This allows the seccomp notifier to continue a syscall. A positive
discussion about this feature was triggered by a post to the
ksummit-discuss mailing list (cf. [3]) and took place during KSummit
(cf. [1]) and again at the containers/checkpoint-restore
micro-conference at Linux Plumbers.

Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4])
which enables a process (watchee) to retrieve an fd for its seccomp
filter. This fd can then be handed to another (usually more privileged)
process (watcher). The watcher will then be able to receive seccomp
messages about the syscalls having been performed by the watchee.

This feature is heavily used in some userspace workloads. For example,
it is currently used to intercept mknod() syscalls in user namespaces
aka in containers.
The mknod() syscall can be easily filtered based on dev_t. This allows
us to only intercept a very specific subset of mknod() syscalls.
Furthermore, mknod() is not possible in user namespaces toto coelo and
so intercepting and denying syscalls that are not in the whitelist on
accident is not a big deal. The watchee won't notice a difference.

In contrast to mknod(), a lot of other syscall we intercept (e.g.
setxattr()) cannot be easily filtered like mknod() because they have
pointer arguments. Additionally, some of them might actually succeed in
user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we
currently cannot tell seccomp to continue from a user notifier we are
stuck with performing all of the syscalls in lieu of the container. This
is a huge security liability since it is extremely difficult to
correctly assume all of the necessary privileges of the calling task
such that the syscall can be successfully emulated without escaping
other additional security restrictions (think missing CAP_MKNOD for
mknod(), or MS_NODEV on a filesystem etc.). This can be solved by
telling seccomp to resume the syscall.

One thing that came up in the discussion was the problem that another
thread could change the memory after userspace has decided to let the
syscall continue which is a well known TOCTOU with seccomp which is
present in other ways already.
The discussion showed that this feature is already very useful for any
syscall without pointer arguments. For any accidentally intercepted
non-pointer syscall it is safe to continue.
For syscalls with pointer arguments there is a race but for any cautious
userspace and the main usec cases the race doesn't matter. The notifier
is intended to be used in a scenario where a more privileged watcher
supervises the syscalls of lesser privileged watchee to allow it to get
around kernel-enforced limitations by performing the syscall for it
whenever deemed save by the watcher. Hence, if a user tricks the watcher
into allowing a syscall they will either get a deny based on
kernel-enforced restrictions later or they will have changed the
arguments in such a way that they manage to perform a syscall with
arguments that they would've been allowed to do anyway.
In general, it is good to point out again, that the notifier fd was not
intended to allow userspace to implement a security policy but rather to
work around kernel security mechanisms in cases where the watcher knows
that a given action is safe to perform.

/* References */
[1]: https://linuxplumbersconf.org/event/4/contributions/560
[2]: https://linuxplumbersconf.org/event/4/contributions/477
[3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io
[4]: commit 6a21cc50f0 ("seccomp: add a return code to trap to userspace")

Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
CC: Tyler Hicks <tyhicks@canonical.com>
Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2019-10-10 14:45:51 -07:00
Eric W. Biederman a89e9b8abf signal: Remove the signal number and task parameters from force_sig_info
force_sig_info always delivers to the current task and the signal
parameter always matches info.si_signo.  So remove those parameters to
make it a simpler less error prone interface, and to make it clear
that none of the callers are doing anything clever.

This guarantees that force_sig_info will not grow any new buggy
callers that attempt to call force_sig on a non-current task, or that
pass an signal number that does not match info.si_signo.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29 09:31:44 -05:00
Linus Torvalds 02aff8db64 audit/stable-5.2 PR 20190507
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlzRrzoUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNc7hAApgsi+3Jf9i29mgrKdrTciZ35TegK
 C8pTlOIndpBcmdwDakR50/PgfMHdHll8M9TReVNEjbe0S+Ww5GTE7eWtL3YqoPC2
 MuXEqcriz6UNi5Xma6vCZrDznWLXkXnzMDoDoYGDSoKuUYxef0fuqxDBnERM60Ht
 s52+0XvR5ZseBw7I1KIv/ix2fXuCGq6eCdqassm0rvLPQ7bq6nWzFAlNXOLud303
 DjIWu6Op2EL0+fJSmG+9Z76zFjyEbhMIhw5OPDeH4eO3pxX29AIv0m0JlI7ZXxfc
 /VVC3r5G4WrsWxwKMstOokbmsQxZ5pB3ZaceYpco7U+9N2e3SlpsNM9TV+Y/0ac/
 ynhYa//GK195LpMXx1BmWmLpjBHNgL8MvQkVTIpDia0GT+5sX7+haDxNLGYbocmw
 A/mR+KM2jAU3QzNseGh6c659j3K4tbMIFMNxt7pUBxVPLafcccNngFGTpzCwu5GU
 b7y4d21g6g/3Irj14NYU/qS8dTjW0rYrCMDquTpxmMfZ2xYuSvQmnBw91NQzVBp2
 98L2/fsUG3yOa5MApgv+ryJySsIM+SW+7leKS5tjy/IJINzyPEZ85l3o8ck8X4eT
 nohpKc/ELmeyi3omFYq18ecvFf2YRS5jRnz89i9q65/3ESgGiC0wyGOhNTvjvsyv
 k4jT0slIK614aGk=
 =p8Fp
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "We've got a reasonably broad set of audit patches for the v5.2 merge
  window, the highlights are below:

   - The biggest change, and the source of all the arch/* changes, is
     the patchset from Dmitry to help enable some of the work he is
     doing around PTRACE_GET_SYSCALL_INFO.

     To be honest, including this in the audit tree is a bit of a
     stretch, but it does help move audit a little further along towards
     proper syscall auditing for all arches, and everyone else seemed to
     agree that audit was a "good" spot for this to land (or maybe they
     just didn't want to merge it? dunno.).

   - We can now audit time/NTP adjustments.

   - We continue the work to connect associated audit records into a
     single event"

* tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits)
  audit: fix a memory leak bug
  ntp: Audit NTP parameters adjustment
  timekeeping: Audit clock adjustments
  audit: purge unnecessary list_empty calls
  audit: link integrity evm_write_xattrs record to syscall event
  syscall_get_arch: add "struct task_struct *" argument
  unicore32: define syscall_get_arch()
  Move EM_UNICORE to uapi/linux/elf-em.h
  nios2: define syscall_get_arch()
  nds32: define syscall_get_arch()
  Move EM_NDS32 to uapi/linux/elf-em.h
  m68k: define syscall_get_arch()
  hexagon: define syscall_get_arch()
  Move EM_HEXAGON to uapi/linux/elf-em.h
  h8300: define syscall_get_arch()
  c6x: define syscall_get_arch()
  arc: define syscall_get_arch()
  Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h
  audit: Make audit_log_cap and audit_copy_inode static
  audit: connect LOGIN record to its syscall record
  ...
2019-05-07 19:06:04 -07:00