Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
-----BEGIN PGP SIGNATURE-----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=Q4jK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Sghw
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for 6.1
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
* tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom: include defconfig in MAINTAINERS
ARM: multi_v7_defconfig: enable more Qualcomm drivers
ARM: qcom_defconfig: enable more Qualcomm drivers
Link: https://lore.kernel.org/r/20220921153734.1314952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not
actually exist. From the patch description, I assume that this
was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in
imx_v6_v7_defconfig.
Fixes: 2cc1cd26e9 ("ARM: configs: Enable ASoC AC'97 glue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now default-enabled when CONFIG_SOC_SAMA7 is
used, so the defconfig entry can be dropped.
Fixes: f611af4c3b ("ARM: at91: Kconfig: implement PIT64B selection")
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USB_FSL_USB2 is no longer available for Arm platforms and
was replaced by the chipidea driver.
Fixes: a390bef7db ("usb: gadget: fsl_mxc_udc: Remove the driver")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the
extra line is redundant.
Fixes: 212e3b6b87 ("ARM: configs: Enable more audio support for i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now a hidden symbol, so just drop the defconfig line.
Fixes: 42d95d1b3a ("drm/rcar: stop using 'imply' for dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is 'default y' and has always been this way, the
line was added in error.
Fixes: dfe21dcaba ("ARM: defconfig: Enable ax88796c driver for Exynos boards")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).
Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.
The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
General setup --->
Platform selection --->
Kernel Features --->
Boot options --->
Power management options --->
CPU Power Management --->
[*] ACPI (Advanced Configuration and Power Interface) Support --->
[*] Virtualization --->
[*] ARM Accelerated Cryptographic Algorithms --->
(or)
[*] ARM64 Accelerated Cryptographic Algorithms --->
...
-*- Cryptographic API --->
Library routines --->
Kernel hacking --->
and moves into the Cryptographic API menu, which now contains:
...
Accelerated Cryptographic Algorithms for CPU (arm) --->
(or)
Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*] Hardware crypto devices --->
...
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable Qualcomm drivers:
1. Command DB (used in SDX55 and SDX65).
2. On Chip Memory - OCMEM (used in MSM8974)
3. RPMh and RPMh Power domain (used in SDX55 and SDX65).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-3-krzysztof.kozlowski@linaro.org
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk drivers
that are still under review and will be merged through the corresponding
subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC
on the main chip, plus an I/O chip and memory in the same
-----BEGIN PGP SIGNATURE-----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=7Id+
-----END PGP SIGNATURE-----
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The generic audio card for Freescale platforms is used by a wide range
of i.MX systems and also has selects for the various audio controllers
used on them so will help with systems that don't use that specific card
too.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220513121258.168364-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a
managed ethernet network switch with either 8 copper ports or 6 copper
ports and 2 SFP cages.
Enable all required kconfig symbols, either as module where possible or
compiled-in where it is not possible.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable HPE GXP Architecture and its watchdog for base support for HPE
GXP SoCs.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AC'97 was quite commonly used on at least i.MX designs so enable the
glue code that allows use of AC'97 with ASoC based designs to improve
testing coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The BeagleBone Black supports audio over HDMI, using a combination of the
DaVinci McASP (used for audio by a very large proportion of DaVinci systems
with audio support) and a TDA998x device driving the HDMI link (this is a
very widely used driver). Build both drivers as modules in multi_v7_defconfig
so they can be more easily included in testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220506222646.1671474-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
-----BEGIN PGP SIGNATURE-----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=aOGl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FYRO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be
used to build a basic kernel for BCM47622 booting to console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmIdnGgbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FjScP/0PDtThnCBAIu5hr61rD
uvhdzPCecHITFS4LdnLrw16IDMMK4t/wEMHegVtC94e8zXaGX+bCbcDGyLpUGHIo
AQTS9ySltlPVTrHa1kfZ4jDlaKdV7g2tNqTZc9Po3+miEmYxy5E1ycceGWjdB4J/
B7YnZbgWlCsfhbWpFLxgWrNthP2VqcA5wXVxFmG4EY1hnkj3f0vkn2NCEKIC9dy9
itrsjLcWcQcr//0UByaWP3LfXDONJA5vAlYBkHUQAkz4PDklsY/lrYdba0MQ0Bno
K3QWR06Y/Cw3eQJoxBPMIVOZr7CdSPX500DeqwrL7Bx1r7+6xKsRBdDEZaOb0DF6
V+smGZGYPAfuH45b3yxt1KDGNoPjtD+Xx9JIDjcIOax4Mdlywp5aEjcmvouN3R0O
lL3PR7y5K6iMZBN2ZDCrI2L0lKsQ82M35tz3eg/lOwchVCuvH066ZOu1f63J7IMG
1qtMntS/jPw96gBp/lO48ouWg+iVQT9se9G2MQ5o9NnkdRB8yt3SrBqlQkEDCyZo
vBw7/Xp2BAIoPmU3vi3L2OKK/Q3lzJRP6xUjMaYXs10h3m9dBESIX/24fWNleKTN
wXbo11BtRn1DyIasq0EVtyXTM0D48lj1keSfnvCPceAKnirBqIswVU21WkOLHv93
VZEJuO2JVeaXOR8oE3EExtfF
=AfIE
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm defconfig updates for v5.18
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
* tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables basic bootup support for the Airoha EN7523 SoC.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-5-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs
enabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which
allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All Tegra20/30/114 serial and audio drivers depend on the Tegra20 APB DMA
driver, enable this DMA driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra20 S/PDIF driver that is a part of HDMI audio subsystem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DragonBoard 410c is mainly supported by the ARM64 architecture
and defconfig, but it can also run well on the ARM32 architecture.
Add the necessary options to the multi_v7_defconfig to simplify
building an ARM32 kernel for DragonBoard 410c.
This is also a possible opportunity to slightly increase CI coverage
for older Qualcomm-based ARM32 platforms that are currently not
represented well in automated CI setups. The APQ8016 SoC used in DB410c
is still quite similar to those. DB410c is already used in some CI systems
so the same hardware could be re-used to get some basic ARM32 boot testing.
When deciding between built-in (y) and module (m), I usually used the
same that is already being used (and functional) in the ARM64 defconfig.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
These options have moved around when generating the defconfig. Update
them to reduce noise when generating future changes.
The exceptions are:
- NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected
by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED
doesn't force-enable the subsystem.
- The SPI_AX88796C network device. This was enabled in v5.11 for Exynos
boards. The driver is not yet merged but there's work being done, so
leave it alone for now.
- PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E
and FEC, but this may be changed in the future as imply does not do
what it was originally intended to do.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
