Using mtdblock on raw flashes is generally a bad idea as it lacks
wear-leveling, bad block handling or power-cut management.
What happens when you use mtdblock and you change any sector of your
mtdblockX device, is that it reads the whole corresponding eraseblock into
the memory, erases the eraseblock, changes the sector in RAM, and writes
the whole eraseblock back. If you have a power failure when the eraseblock
is being erased, you lose all the block device sectors in it. The flash
will likely decay soon because the eraseblocks will wear out.
Remove this archaic tool as its use case should rather be only for debug
purposes. This means that write-capable block file systems like ext2,
ext3, FAT, etc. will no longer be addressed with at91 defconfigs. For
read only block filesystems like SquashFS, use MTD_UBI_BLOCK instead and
benefit of UBI's bit-flip handling and wear-levelling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220420134740.193563-1-tudor.ambarus@microchip.com
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmJ3AwAKCRCKwlD9ZEnx
cNa0APwJIXP3GulpMvVC07l9MISB0TuMIKJr7hpix4FWR3UgdAD/Qb4uzseyOt7P
OR1bifu1lIXrha/ABr3dhZr77B2DYwQ=
=9bw+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W1C7
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.19
- Enable support for the Renesas RZ/V2L SoC and the Maxim MAX96712
Quad GMSL2 Deserializer in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.18-rc1.
* tag 'renesas-arm-defconfig-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.18-rc1
arm64: defconfig: Enable Maxim MAX96712 Quad GMSL2 Deserializer support
arm64: defconfig: Enable ARCH_R9A07G054
Link: https://lore.kernel.org/r/cover.1650638503.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After converting to multiplatform the old IXP4xx defconfig
doesn't even activate the ethernet driver anymore, we need
to refresh this thoroughly.
- Drop options that ARCH_MULTI_V5 selects for us.
- Some options moved around because of multiplatform and
because generic Kconfig movements.
- Drop all MACH_* that do not exist anymore.
- Compress the kernel and initramfs with XZ as the memory
is often limited for these machines.
- Make sure IXP4XX_QMGR and IXP4XX_NPE is selected.
- Make sure the MTD_PHYSMAP_IXP4XX is selected and not
the old MTD_IXP4XX (will be deleted).
- Activate CRYPTO_DEV_IXP4XX
- Add some very basic default drivers such as AT24 EEPROMs
used in many routers.
- Add some kernel configs needed to bring up OpenWrt
which is the only userspace for these devices:
CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD,
EPOLL, OVERLAY_FS and SQUASHFS.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Imre Kaloz <kaloz@openwrt.org>
Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmJrm1UTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zobdLD/wM72K2ZSTaYglcq3XH/UcoGFxdxX4T
4HT3KtuudmLDuTHdSJXzWKHjcYn2Qkn6B7APBIihyXt74sfC1ZrrTv4RafkWGAnj
SLMAL3U4XwHrSoc8L/sjCBE61Rybn+0hPR5gputvxJHFoX4WS+hNYV8o3mdJBXME
tc8KJZhm1EPaa4fl3ep8lwzJBOgoNkv6yOk/k0skR7eGmz8iIMsH8QoQlzoMRD6f
dt2Hih5nzoZKL8HKz2H0ct24eAp3ERXcrce5yCPChMO19/HTwHnjvICwtlxkJ3lm
OAm13I1naURAwqyvdnH6KHb6gi1TINHY1MM3IIf6iLzfuY9iZELBS3AiT78GF3HA
PI4sPl8OgODLBrZTiqIuDVWLEsje5kSNhb80a+OLp9KUuaGybdkogBulHXE0OPIf
eafDRK23iJ7G8vu744uvdI9CcWdpKLTPOHlbvu9HVzVWsLdFUlUxSM2N3dg7XaBX
jn4LWsx5OA95cMmnpcYVLs11DmbpQ9fVjpJDBXqgQqb+ra3bmEL312g9j0ReKick
GV4HUR+ZDrZ9U+X60Fp3Lm+FOAjeZ8ZkuPUeI5CpaT57eGUieu67uUvAClrA970J
s3Ptai5JX8KffBmD4/H7d5spz30BPjqv88OVhYR4GPSwP10TW9qedxCQWP5snuJz
xKYuJ0BjdtyaXw==
=AH48
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=12TT
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Link: https://lore.kernel.org/r/20220429080626.494150-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_ARCH_BCMBCA in multi_v7_defconfig. This config can be
used to build a basic kernel for BCM47622 booting to console.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In a recent discussion[1] it was reported that the binfmt_flat library
support was only ever used on m68k and even on m68k has not been used
in a very long time.
The structure of binfmt_flat is different from all of the other binfmt
implementations because of this shared library support and it made
life and code review more effort when I refactored the code in fs/exec.c.
Since in practice the code is dead remove the binfmt_flat shared library
support and make maintenance of the code easier.
[1] https://lkml.kernel.org/r/81788b56-5b15-7308-38c7-c7f2502c4e15@linux-m68k.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARM
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87levzzts4.fsf_-_@email.froward.int.ebiederm.org
The Logic PD Torpedo baseboard has an ISP1763 USB controller attached
to the GPMC bus. Enable the driver as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220221184107.2321951-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit a96d2ba2d8 ("ASoC: codecs: tlv320aic3x: move I2C to separated
file") split the driver into SPI and I2C code and also provided a
separate configuration option for it.
The RX51 audio fails to probe since this commit, so let's add this
non-obvious configuration option to the defconfig.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Message-Id: <20211216150506.31163-1-merlijn@wizzup.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The SoM Apalis/Colibri iMX6 use the ADC of a STMPE 811. Enable
its driver.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.
Take this opportunity to update some other minor config
options:
- CONFIG_MARVELL_PHY moved around because of Kconfig
changes.
- CONFIG_SENSORS_DRIVETEMP should be selected since is
regulates the system critical alert temperature on
some devices, which is nice if it is handled even
if initramfs or root fails to mount.
Fixes: 319a70a5fe ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fa ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After all the work that Linus Walleij did on this platform, it can be
part of a generic kernel build as well.
Note that there are known bugs in little-endian mode on ixp4xx, and
no other ARMv5 platform at this point supports big-endian mode, or is
likely to in the future, so there is limited practical value in this,
but it helps with build testing and ixp4xx little-endian support may
get fixed in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After iop32x was converted to the generic multi-irq entry
code, nothing really stops us from building it into a
generic kernel.
The two last headers can simply be removed, the mach/irqs.h
gets replaced with the sparse-irq intiialization from the
board specific .nr_irqs value, and the decompressor debug
output can use the debug_ll hack that all other platforms
use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the custom ISA I/O and the missing sparse-irq support
out of the way, s3c24xx can now be built into the same
kernel as all other ARM9 based platforms.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver for the Qualcomm random number generator and the
userspace crypto API.
This was a tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220311154919.1797920-2-bmasney@redhat.com
The CONFIG_TEGRA_VDE has been deprecated and replaced with the new V4L
options after de-staging of the tegra-vde driver. Update the config entry.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is effectively a revert of the temporary disablement
patch. Battery charging now works!
We also enable static battery data for the Samsung SDI
batteries as used by the U8500 Samsung phones.
Cc: Lee Jones <lee.jones@linaro.org>
Fixes: a1149ae975 ("ARM: ux500: Disable Power Supply and Battery Management by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This activates display drivers that give console on the
different U8500 mobile phones, the GNSS subsystem and the
SIRF GNSS driver so we can manage the GPS chips, the regulator
LEDs as used in some phones and one more IIO light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This just updates the U8500 defconfig to reflect what has
happened in the Kconfig: DRM_PANEL_SONY_ACX424AKP is now
handled by DRM_PANEL_NOVATEK_NT35560, all ST sensors have
SPI version drivers that we don't use, and some debug
options moved around.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The only effect of this symbol is to select PWM_SAMSUNG. Drop it and fix
the affected defconfigs to still keep PWM_SAMSUNG=y. Developers using
MACH_NEO1973_GTA02 and/or MACH_RX1950 now have to manually select PWM and
PWM_SAMSUNG (and get the freedom to select is as a module or not at all).
A side effect of this change is that allmodconfig now contains
PWM_SAMSUNG=m (which was =y before).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220328082638.112185-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The dove platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
This work was originally done in 2015 as all the ARMv7 machiens
gove moved over to multiplatform builds, but at the time it conflicted
with some patches that Russell was trying to upstream, so we
left it at that.
I hope that there is no longer a need to keep dove separate from the
rest, so we can either add it to the other ARMv7 platforms, or just
replace it with the DT based platform code for the same hardware
in mach-mvebu and remove mach-dove entirely.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the clock support and the interrupts out of the way, ep93xx can be
compiled into the same kernel image as the other ARMv4/v5 platforms. The
last obstacle are the two workarounds for broken boot loaders that
require us to re-initialize the ethernet controller and/or the watchdog
on certain machines.
Move this code into the decompressor sources directly, checking for
each possibly affected machine individually.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The WM8731 driver has been refactored so the I2C and SPI bus code is
separate modules. Refresh multi_v5_defconfig to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: soc@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
Various updates for the 32-bit and 64-bit defconfig files, mostly to
enable additional hardware drivers for more machines, specifically for
the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm,
Airoha, Tegra, Renesas, and i.NX.
The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre
Przywara to cleans up the multi_v5_defconfig for some cruft that has
accumulated and drivers that got disabled unintentionally, while Anders
Roxell makes it more useful for running under Qemu.
-----BEGIN PGP SIGNATURE-----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=/9iL
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Various updates for the 32-bit and 64-bit defconfig files, mostly to
enable additional hardware drivers for more machines, specifically for
the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm,
Airoha, Tegra, Renesas, and i.NX.
The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre
Przywara to cleans up the multi_v5_defconfig for some cruft that has
accumulated and drivers that got disabled unintentionally, while
Anders Roxell makes it more useful for running under Qemu"
* tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
ARM: configs: multi_v5: Enable Allwinner F1C100
ARM: configs: clean up multi_v5_defconfig
ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
ARM: configs: multi_v5_defconfig: remove deleted platforms
ARM: defconfig: add SMB347 charger driver for p4note
arm: multi_v5: enable configs for versatile
arm64: defconfig: enable Layerscape SFP driver
ARM: configs: at91: sama7: Unselect CONFIG_DMATEST
ARM: configs: at91: add eic
arm64: defconfig: enable the CVP driver
ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573
ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers
ARM: configs: at91: sama7: add config for cpufreq
ARM: configs: at91: sama7: enable cpu idle
ARM: configs: at91: sama7: Enable crypto IPs and software algs
ARM: configs: at91: sama7: Enable UBIFS_FS
ARM: configs: at91: sama7: Enable NAND / SMC
arm64: defconfig: tegra: Enable GPCDMA
...
The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are
currently not selected by any defconfig. sunxi_defconfig only covers the
v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image.
Add the required symbols to multi_v5_defconfig, to give people some sane
default config when playing around with this chip. This is probably more
important as there are surely not many distros out there supporting
ARMv5 out of the box.
This allows my LicheePi Nano board to boot to a busybox prompt.
The zImage size grows by about 50 KB, in detail:
text data bss dec hex filename
10510000 4400700 687740 15598440 ee0368 vmlinux-old
10588592 4469096 686812 15744500 f03df4 vmlinux-new
14922908 arch/arm/boot/Image-old
15067388 arch/arm/boot/Image-new
6388016 arch/arm/boot/zImage-old
6440064 arch/arm/boot/zImage-new
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clean up some cruft accumulated over time:
- The default definition of CONFIG_ZBOOT_ROM_* got fixed in commit
39c3e30456 ("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS
value to 0x0"), so we don't need the explicit setting anymore.
- CONFIG_ABX500_CORE now explicitly depends on the ARMv7 ARCH_U8500,
so we don't need to disable that symbol explicitly anymore.
- CONFIG_DEBUG_FS was just moved around in the generated defconfig.
No change to the generated .config or savedefconfig.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-5-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 91185d55b3 ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
led to de-selection of CONFIG_FB, which was a prerequisite for
BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on.
Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP,
FB_IMX and FB_ATMEL back into the generated .config.
This also adds some new FB related features like fonts and the
framebuffer console.
See also commit 8c1768967e ("ARM: config: mutli v7: Reenable FB
dependency"), which solved the same problem for multi_v7_defconfig.
This relies on [1], to fix a broken Kconfig dependency.
[1] https://lore.kernel.org/dri-devel/20220315084559.23510-1-tzimmermann@suse.de/raw
Fixes: 91185d55b3 ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-4-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow
more fine grained control over the inclusion of certain Kconfig files.
multi_v5_defconfig was selecting some drivers described in
drivers/media/platform/Kconfig, which now wasn't included anymore.
Explicitly set the new symbol in multi_v5_defconfig to bring those
drivers back.
This enables some new V4L2 and VIDEOBUF2 features, but as modules only.
Fixes: 06b93644f4 ("media: Kconfig: add an option to filter in/out platform drivers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-3-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some ARMv5 platforms got removed from the kernel over time, so we don't
need their symbols in the multi_v5_defconfig anymore:
- ARCH_U300 got removed with commit ce1380c9f4 ("ARM: remove u300
platform"), so CONFIG_ARCH_U300 is not around anymore.
- ARCH_U300 was the only platform selecting ARCH_AMBA, which I2C_NOMADIK
depends on. So we won't need this symbol anymore, and can't select it
anyway.
- i.MX27 got converted to DT in 879c0e5e0a ("ARM: imx: Remove i.MX27
board files"). Remove the now obsolete board file version symbols.
No change in the generated .config or savedefconfig.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-2-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make it possible to boot a versatile machine in qemu.
Boot command:
/usr/bin/qemu-system-arm -cpu arm926 -machine versatilepb \
-nographic -nic none -m 256M -monitor none -no-reboot \
-kernel zImage -dtb versatile-pb.dtb \
-append "console=ttyAMA0,115200 rootwait root=/dev/vda" \
-drive armv5_rootfs.ext4,if=none,format=raw,id=hd0 \
-device virtio-blk-pci,drive=hd0
When doing build and boot testing, it makes more sense to enable arch
vesatile, serial amba_pl011 and virtio (mmio|blk|pci) to
multi_v5_defconfig to make that boot out of the box, with a modern
virtio (mmio|blk|pci) driver. Using the above commandline. Another way
to build and boot would be to use tuxmake/tuxrun. Tuxmake [1] builds the
kernel, and Tuxrun [2] boots the kernel in qemu. Both projects uses
podman to do the build/tests inside. This makes both project a good
tool to use when finding a regression that you would like someone else
to reproduce with the exact same setup.
tuxmake --runtime podman --target-arch arm \
--toolchain gcc-11 --kconfig multi_v5_defconfig
tuxrun --tuxmake ~/.cache/tuxmake/builds/3072 --device qemu-armv5
[1] https://tuxmake.org/
[2] https://tuxrun.org/
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20220308121933.3967868-1-anders.roxell@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DMA test client should be selected only when one is debugging a DMA
Device driver. There's no need to select the DMA test client by default,
unselect it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220228085906.18508-1-tudor.ambarus@microchip.com
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
-----BEGIN PGP SIGNATURE-----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=AfIE
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm defconfig updates for v5.18
The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.
Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.
* tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables basic bootup support for the Airoha EN7523 SoC.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-5-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
I have no reason to believe these boards have any more users and I
haven't tested them for several years. Removing them may simplify
other changes to the various PXA boards people still care about.
The recent conversion of pxa2xx_spi to GPIO descriptors for example
had to update this board despite no one caring or testing.
Great boards that got me started in kernel development, RIP!
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20220227134431.908998-1-jic23@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs
enabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which
allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZfpgAKCRCKwlD9ZEnx
cM5XAP4nyb1rxKQpDWbdozSOmItkytpfC2+NTS9+Ul0mAVz98QD/YfuW1awSR8EE
6iyGVM2WqFbaKKGNEqogHI2eNGvbyAk=
=HkeI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G8H0
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.18
- Enable the new Audio Graph Card2 driver which can handle sound cards
more flexibly in the arm64 defconfig,
- Disable unneeded 8250 serial options in shmobile_defconfig,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Disable unneeded 8250 serial options
arm64: defconfig: Enable Audio Graph Card2 driver
Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add config flags for CPUFreq. This includes enabling CPUFreq support,
CPUFreq DT driver and governors, default one being the conservative
governor.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-11-claudiu.beznea@microchip.com
Similar to sama5_defconfig, enable hardware acceleration for the
sama7 crypto IPs, enable crypto software implementations in case
the crypto IPs need a fallback to them, and enable the hash and
skcipher user interfaces in case one wants to offload the crypto
algs to the sama7 crypto IPs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220204135905.512013-1-tudor.ambarus@microchip.com
sama7g5 contains a Static Memory Controller that can communicate with
NAND flashes. Enable UBIFS_FS in case one wants to put an ubifs rootfs
on a NAND flash. CONFIG_CRYPTO_LZO and CONFIG_CRYPTO_DEFLATE appear as
removed because they are selected by CONFIG_UBIFS_FS.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220202070244.150022-1-tudor.ambarus@microchip.com
Enable the Static Memory Controller. Tested with Micron MT29F4G08ABAEAWP
NAND flash. Software error correction is not needed, as the SMC includes
a PMECC error correction hardware module.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111125641.903624-1-tudor.ambarus@microchip.com
The only Renesas platform with 16550 serial ports is Emma Mobile EV2,
which does not need any of the following options:
- CONFIG_SERIAL_8250_DEPRECATED_OPTIONS,
- CONFIG_SERIAL_8250_16550A_VARIANTS,
- CONFIG_SERIAL_8250_PCI,
- CONFIG_SERIAL_8250_PERICOM (new in v5.17-rc1).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/caefa806d66b83085c4ceab09819b469088664a1.1643371790.git.geert+renesas@glider.be
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dc ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that
have been removed, and Wasin Thonkaew has a cosmetic change.
-----BEGIN PGP SIGNATURE-----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=ZaDF
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that have
been removed, and Wasin Thonkaew has a cosmetic change"
* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
arch: Remove leftovers from prism54 wireless driver
arch: Remove leftovers from mandatory file locking
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Documentation, arch: Remove leftovers from raw device
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9iKYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Giwf+OjKD1fwYzsSRFVyY5m+Vn1iZANCi
sXb5mVQks435oeBV44O5AEsaTLb+qQEyFQZBL6IdbIlPm+LwHu2GYTn2F84bilww
vO7mVbIpeh7bInD3eELWdrE6BdhcsenlLi3Tg0oeMQ7HAk4FT7GzcWk2laVemOnU
RoWjTn0S97Bh4aWfGEg22c+wfh1Egp6rLmHxaXCUJDrCexyA4CLZ6+r/ZgFUlb2q
FbdmPyjPnasiyM1RsY+hWY6dELl8xJwNg8hCA1DBddDsDLj8gMYXvZmR3oYHOG/1
/6Z4y6gbJ7NK9h4xPvjJ/XCdlXaEpZAIwr3OB+aEpCIXHNTaTzQL3v240A==
=BPLr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAoR8ACgkQmmx57+YA
GNncjBAAtHr7vQaai+8++OPDb3xwvABT1s2PxQ9m3JXvzxPfIjEMA+jp3Y4R2OM+
fu91HhdqHM/fRFHOMegDWWg8GObsOr2grLoC0QpZqySaXZUhD1btPpR4K70qC712
klf7GV3lqxk7hjLJvTSfiBJrHbpqZqCisXrV9kRiSQTaIE8556phzHejs1MhSmeE
RffrU1H7Z2gPyc0TiuOl52QmOIDkUknl5EQ+rXpADjVtzBdSjZ/MjarzLxX+cTKI
qxjI4dfe+9OJoKfIAGbeoV6s8jEYLs2TS4IopH3c8rH1gaGa18+kw/FdzZwOx0ak
Js3XasuRcQwwKwg3ijDpvfDOD0q21yl7u/6kYVDk8JV14q/2Ow/755wCYTBSS69m
u5FyZFmOZQ7bYx17IAs8hJ9JgPvviIr9SSVtezei6mBTYqrMZPeT+5OFV+xFO8CV
648gxeiSVPi1f0Nht3P0Pxi3dlj8G64g0tvwcMetMSQeaoKGxnevL7n2HVG13EUW
pBCirF9HpETiXxEQTI2HFhl9h3zCFjnYJjay354CWW3gndi3iE1Rdc7ItwMBgzCD
bqjcBcZ4M7TShi7T47S3VWMheJ9POrhVVpnYxXBe2b5hkn24zwh+cZu1Xhc8JSoW
HQ5VtnlMnTLlzOjN33O+I4YOZPuIPJ14XCmAA2Mr+1RZvqIbhOE=
=rJsW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Sama7: addition of QSPI SPI-NOR and the QSPI controller for this
product
- Addition of the crypto algorithms that are fallbacks for HW engines
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYbzBawAKCRAfOrpwrNPN
DJRsAP4qZurUWikvcozb3XDHbzrjGZK/g5m6r/LydWtf0YMqMAEA291YZ7lV6O96
9wSdR1pyuzfY8yoS7vT0bANcH4mTqwM=
=cxlf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hIav
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig #1 for 5.17:
- Sama7: addition of QSPI SPI-NOR and the QSPI controller for this
product
- Addition of the crypto algorithms that are fallbacks for HW engines
* tag 'at91-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: Enable crypto software implementations
ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
Link: https://lore.kernel.org/r/20211217165850.29694-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches enable various drivers used by new and existing boards in
both the Tegra default configuration and the multi-v7 configuration.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmG8snATHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoTneEACBYzNQ0wCnJoO4RGhSl3K4A8zgQtLt
guyeZLbh2PW/wLOa12wy7+YB5nWABCCxsjZflr2teDwOv3E7FkAsCA5WpckqR2gk
Xej/QVdFnEpjESHc+JaReSimY2jfwUB2czVUraQRyukplk4YSPG3SCZ0Pw5TYVPy
/Ga77d4S0nk9uvP7TbNClaQq3YKUWNvgoE/3EmFnpJpyU31KSUQuc/ChD4taMYvO
WbLK9YdVCKVw/NLCqQjNNuv9f1TkeTSjMQQbmX5fpHNNw/YYQShtzS1bhAfFhCW7
rEqmX6HRK+uhiIQn9jnRGw5f08oJPRRKm4qo/l6nVsoaYMTZl+nX56irvHBn8MuU
rltc7hiliLwYawpVzNJmUOoPNbRZcCvEttx94RxpF2/7Vy6Sq4+xZmMkzPOA3d72
SOZbFm5L47Fineo4RqaByzhDz/e9ZV10jfN68XIB+Yzq/GpiO+J7+2UeTxoQQnSq
3hXypopKjLd8bo8bcx+2NeOcvLmt84OFQkqv1c5jj/tlx9Dwemfgf1PgNrwtGMqP
oCZztrLHWFnS5dtRDGotOTg+pR1GCCpahGZO+0B7lxe8xECbI7pgi6Hszn+HFItX
dD8tIgd2vRVDsuX5h45d3OuRg/vgB677iW5iMG104HrjT87jyiQO6+MEG1GXN7wr
VPvAuTSGYiKMsA==
=199F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xFt5
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.17-rc1
These patches enable various drivers used by new and existing boards in
both the Tegra default configuration and the multi-v7 configuration.
* tag 'tegra-for-5.17-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: config: multi v7: Enable display drivers used by Tegra devices
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
Link: https://lore.kernel.org/r/20211217162253.1801077-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable at least the same amount of algs as the hardware IPs are
supporting so that they are able to fallback to the software
implementations in case they need it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211215134311.304427-1-tudor.ambarus@microchip.com
sama7g5ek comes with a SPI NOR flash connected to the QSPI
controller. Enable the SPI NOR subsystem and the QSPI controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211209153744.357465-2-tudor.ambarus@microchip.com
This config was removed so remove all references to it.
Fixes: 76a3c92ec9 ("cifs: remove support for NTLM and weaker authentication algorithms")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Raw device interface was removed so remove all references to configs
related to it.
Fixes: 603e4922f1 ("remove the raw driver")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> [arch/arm/configs]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All Tegra20/30/114 serial and audio drivers depend on the Tegra20 APB DMA
driver, enable this DMA driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra20 S/PDIF driver that is a part of HDMI audio subsystem.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All imx6 DHCOM devices uses a on module gold cap/battery powered i2c rtc
"microcrystal,rv3029", which isn't enabled in the imx_v6_v7_defconfig.
The rtc for all imx6 DHCOM devices is defined in: imx6qdl-dhcom-som.dtsi
To have a working clock on all imx6qdl DHCOM based devices, enable the driver.
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable charger, touchpad and EC drivers found on Acer Tegra124 (Nyan)
Chromebooks, display bridge found on ASUS TF700T and audio codecs
found on ASUS tablets.
Suggested-by: Thomas Graichen <thomas.graichen@gmail.com> # Nyan options
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This enables the SL3516 crypto driver on the Gemini platforms
where it is available, by default in the defconfig. Clean
up some noise around the crypto options while we're at it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20211206011158.4180141-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DragonBoard 410c is mainly supported by the ARM64 architecture
and defconfig, but it can also run well on the ARM32 architecture.
Add the necessary options to the multi_v7_defconfig to simplify
building an ARM32 kernel for DragonBoard 410c.
This is also a possible opportunity to slightly increase CI coverage
for older Qualcomm-based ARM32 platforms that are currently not
represented well in automated CI setups. The APQ8016 SoC used in DB410c
is still quite similar to those. DB410c is already used in some CI systems
so the same hardware could be re-used to get some basic ARM32 boot testing.
When deciding between built-in (y) and module (m), I usually used the
same that is already being used (and functional) in the ARM64 defconfig.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-2-stephan@gerhold.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Add options that are enabled in the common OpenBMC kernel
- Re-enable DRM_FBDEV_EMULATION
- Turn on the various sensor drivers that are used in BMC systems,
so we can boot test where they are modelled in Qemu
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmFw+20ACgkQa3ZZB4FH
cJ6PQRAAmFrMn2Dak9lELNM1nqdzTzadBqQEyZd4i81NRNGmNdg4sLd9kXcQ40mQ
vuTPkbH91LpDnkZKv7aDpmP1bAXoi8sWkxMeG7THultEmsLJ44wE5kwPH0XnCs0G
SqdGX1fvLhur0qPBG6tO1cZ6R3tdosLOZQF4q7xPKHsmWszuogiNcp0p42tpkP74
tw9KuM9bv6zl2OngemSse1s92xx+t8m4/T31YC1KAwIdA74EZvWV6Pu3G7SOAq9U
X5iiJEcbiUSTto0FLLYmAP9PeHiB6u4a6MxpVYXFAQiAVZQvjh+IZwjUCkwzrnj+
3u8485T2BMByyvVX77TAaF5edQ0AKV51E2unRXICPcAe7SUKMGMIgBUdR9ewitt8
v71fWlbJCu/adEn2YYpiiaRIZVN02iKj9cqK0pevHjOsNGVTTySJp1Ifl/lo5hst
Re12vTMnaOCtaMo7uOkYoDFpjDSjSg+gKp+8FslUBphf8Oeo8y/u8a2DWsPkDWmc
P7rcmtboe3shqTJlzRBFwcDAAC2WpIBp8ivCccdJDnwjDUhj3rd3NCx+fsAgnUZd
m8WTxKDFopHv+ArUyp0bcS3YsxbIxcX3nTB5qPOsSkJ9lBVAAeQxgB2tvtrSI8cl
w+TcJyWJKQtydwJmMnX/u/YC+dZNFIJolPBWu+y3NfSo8I/bBn4=
=PGcn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=D/YI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.16-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/defconfigs
ASPEED defconfig updates for 5.16
- Add options that are enabled in the common OpenBMC kernel
- Re-enable DRM_FBDEV_EMULATION
- Turn on the various sensor drivers that are used in BMC systems,
so we can boot test where they are modelled in Qemu
* tag 'aspeed-5.16-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: configs: aspeed: Remove unused USB gadget devices
ARM: config: aspeed: Enable Network Block Device
ARM: configs: aspeed: Enable pstore and lockup detectors
ARM: configs: aspeed: Enable commonly used drivers
ARM: configs: aspeed: Disable IPV6 SIT device
ARM: configs: aspeed_g5: Reneable DRM_FBDEV_EMULATION
Link: https://lore.kernel.org/r/CACPK8Xd0mVn2Cy7d=VBTDMpU=WHrftsiihwH224ekFSDGKAbyA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq1uwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7GsAf+Ke0evf++bsvZnsdNW7UPQAtjnYgK
tNnQb97q5yz904u0tIRRjg2Qug+e2ohasxAUK2v0Jg58paYpVEmK7Kfa91BIds8F
Zw1rXAw3owyxt5VfWw5GT8TQEm/3MyMQvKJKdvTuSL+LEPcVIfXU88Us0oh9zSIj
SS2HFI6xmjCFI8JDgctGZcKBoTCJQlycI1lwdA7gpXXcJ4XJepxpzxtOobXKoDuv
KAJNSSGjY933y8HlImXFKol0KABlVB/ievV48PDvktQ3Rj526AG+ElB0m48YU7wQ
36hDX1Vmoun9L6QuICizklATNTwfT7O6fxEOpWJuFNja1orKzMXSyoatcA==
=DPy3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aROW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfigs
i.MX defconfig update for 5.16:
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
* tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable HID I2C
ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
ARM: imx_v6_v7_defconfig: build imx sdma driver as module
ARM: imx_v6_v7_defconfig: rebuild default configuration
ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
ARM: imx_v6_v7_defconfig: enable mtd physmap
Link: https://lore.kernel.org/r/20211016140138.1603-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
The HID and mass storage gadget devices are used for the OpenBMC Web
UI's remote keyboard/mouse feature. The others are not required, so
disable them.
Signed-off-by: Joel Stanley <joel@jms.id.au>
No one is using this device on OpenBMC systems, and there is no code to
manage it in phosphor-networkd (the default OpenBMC userspace) as of
March 2021:
> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable HID I2C in the imx defconfig as it is used for a HID compliant
wacom device on the reMarkable2 tablet.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make mvebu_v7_defconfig; make savedefconfig" to rebuild
mvebu_v7_defconfig
This re-ordered the following configuration options:
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PCI=y
CONFIG_PCI_MVEBU=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
And dropped the following nowadays obsolete configuration options:
CONFIG_ZBOOT_ROM_TEXT=0x0 (default now anyway since commit 39c3e30456
("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"))
CONFIG_ZBOOT_ROM_BSS=0x0 (ditto)
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable CONFIG_MTD_PHYSMAP which is nowadays required for
CONFIG_MTD_PHYSMAP_OF.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFMHfQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7QUwf/dO+FrGSWlVxHeG/oKMb6iQqZs0zb
40F68OYCF+ucGJlwAkErnLcqxtC7rD8NHsGvxnXMbTNlhtjl5USw0tIki+3cw1EP
LggbTjlOCRDLnF2YmWfXN+hLz5On38TG9TvvWt8x2CBO9WXgipaG8JHCCsxdXZus
vk37hZSAlwqmkXHHDApBMsMTqma8ZlDRELrgnXeHL53pYFDxKWoOhL0WHvvZ+kFO
I3lnIB4FdAOgm+EoAAW2s6v/IJobhC19KoKBrtf3FRo6KQk5A6L8T2CFPMkL0cFf
zJboFIOmwMnw00O44RWKDPWDQKKMZYJubj+zHaAnUFRfg4D9KKSDQApffA==
=oDbx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=giT+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15:
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable fb
ARM: dts: imx6qdl-pico: Fix Ethernet support
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
Link: https://lore.kernel.org/r/20210923063356.GK13480@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF to allow for systemd
interoperability. This avoids the following failure on boot:
[ 10.615914] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build CONFIG_IMX_SDMA as a module to avoid the following boot issue:
[ 5.214751] imx-sdma 20ec000.sdma: Direct firmware load for
imx/sdma/sdma-imx6q.bin failed with error -2
[ 5.215762] imx-sdma 20ec000.sdma: Falling back to sysfs fallback
for: imx/sdma/sdma-imx6q.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make imx_v6_v7_defconfig; make savedefconfig" to rebuild
imx_v6_v7_defconfig.
This dropped the following nowadays obsolete configuration options:
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
CONFIG_CS89x0=y (selected by CS89x0_PLATFORM)
CONFIG_SMSC_PHY=y (selected by USB_NET_SMSC95XX)
CONFIG_GPIO_MC9S08DZ60=y (depends on MACH_MX35_3DS)
CONFIG_REGULATOR=y (selected by various stuff)
CONFIG_MEDIA_CAMERA_SUPPORT=y (defaults to on if MEDIA_CAMERA)
CONFIG_MEDIA_CONTROLLER=y (selected by various stuff)
CONFIG_VIDEO_V4L2_SUBDEV_API=y (selected by various stuff)
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_FSL_USB2=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change CONFIG_SND_SOC_TLV320AIC3X to CONFIG_SND_SOC_TLV320AIC3X_I2C.
I did double check all current mainline device trees and they are all
using the I2C rather than the SPI variant.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
These options have moved around when generating the defconfig. Update
them to reduce noise when generating future changes.
The exceptions are:
- NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected
by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED
doesn't force-enable the subsystem.
- The SPI_AX88796C network device. This was enabled in v5.11 for Exynos
boards. The driver is not yet merged but there's work being done, so
leave it alone for now.
- PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E
and FEC, but this may be changed in the future as imply does not do
what it was originally intended to do.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
These options were renamed in recent times. Add the new name so the
driver is built again, and drop the old name.
POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d620 ("PM: AVS:
smartreflex Move driver to soc specific drivers"). Add the new symbol.
QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8e ("cpuidle: Convert
Qualcomm SPM driver to a generic CPUidle driver").
SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba7 ("ASoC:
mmp-sspa: Add Device Tree support"). Enable that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
A number of options in the defconfig are enabled by other options;
either through selects or defaults.
SECCOMP is on by default as of commit 282a181b1a ("seccomp: Move config
option SECCOMP to arch/Kconfig").
NET_SWITCHDEV is enabled by NET_DSA. I think this is a result of commit
227d72063f ("dsa: simplify Kconfig symbols and dependencies").
SIMPLE_PM_BUS is selected ARCH_OMAP2PLUS as of commit 2a39af3870 ("ARM:
OMAP2+: Fix booting for am335x after moving to simple-pm-bus").
MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2 ("net:
ks8851: Select PHYLIB and MICREL_PHY in Kconfig").
SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9 ("smsc95xx:
add phylib support").
STMPE_I2C is default y. It was explicitly added to the defconfig in commit
d8f0ddc838 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not
required.
CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474a ("ARM:
multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults
on when ARCH_ACTIONS is enabled. Drop them.
CROS_EC_CHARDEV defaults to MFD_CROS_EC_DEV, which defaults to CROS_EC since
commit 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name").
TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit
19d41e5e9c ("soc/tegra: fuse: Add APB DMA dependency for Tegra20").
USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out
of the defconfig but is enabled, as intended by d50229cee6 ("ARM:
multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA").
SERIAL_OWL_CONSOLE defaults to on when SERIAL_OWL=y, and has since it
was introduced.
Commit c6774ee035 ("media: Kconfig: make filtering devices optional")
made MEDIA_PLATFORM_SUPPORT, MEDIA_CAMERA_SUPPORT and MEDIA_CEC_SUPPORT
default y if MEDIA_SUPPORT_FILTER is disabled, so they fall out of the
defconfig.
MEDIA_CONTROLLER is selected by a number of drivers in the config, and
additionally defaults to MEDIA_PLATFORM_SUPPORT which is enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-3-joel@jms.id.au
SIRF was removed in commit f3a732843a ("ARM: remove sirf prima2/atlas
platforms"). This covers ARCH_SIRF, SERIAL_SIRFSOC, SERIAL_SIRFSOC_CONSOLE,
I2C_SIRF, SPI_SIRF.
EVI_VARS was made x86 only in commit 963fabf37f ("efi: efivars: limit
availability to X86 builds").
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-2-joel@jms.id.au
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit be117ca322
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling
DRM_FBDEV_EMULATION for configurations that had it enabled.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
This CONFIG option was removed in commit 278b13ce3a ("Input: remove
input_polled_dev implementation") so there's no point to keep it in
defconfigs any longer.
Get rid of the leftover for all arches.
Link: https://lkml.kernel.org/r/20210726074741.1062-1-yuzenghui@huawei.com
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The usual set of defconfig updates, including one new defconfig file
for the new sama7 family of SoCs.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL9tt5t5GS2LDRf4RAmYSAKCO54nhlHsmi+MwS+shKFZoeWsgNQCgpCZF
vtNPWQt8uTY8606ZgLOj4hA=
=xoLh
-----END PGP SIGNATURE-----
Merge tag 'defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, including one new defconfig file
for the new sama7 family of SoCs"
* tag 'defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: config: aspeed: Regenerate defconfigs
ARM: config: aspeed_g4: Enable EDAC and SPGIO
ARM: config: aspeed: Enable KCS adapter for raw SerIO
ARM: config: aspeed: Enable hardened allocator feature
ARM: imx_v6_v7_defconfig: enable driver of the LTC3676 PMIC
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
ARM: configs: multi_v7: enable PL35x NAND controller
arm64: defconfig: Enable Qualcomm MSM8996 CPU clock driver
ARM: imx_v6_v7_defconfig: Let CONFIG_SCSI_LOWLEVEL be selected
ARM: imx_v6_v7_defconfig: Select CONFIG_KPROBES
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a new
cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5 based)
SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhL0Bu5t5GS2LDRf4RAtYAAJ9qcN3tF8tHPPBUknXjvQVN7ESntwCfQtPu
XOVR6q993d7EZh3ATYuXVtE=
=igP/
-----END PGP SIGNATURE-----
Merge tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
A make defconfig && make savedefconfig was performed for each
configuration.
Most changes are due to options moving around, except for the following
which are due to changing defaults:
- SECCOMP is enabled by default as of commit 282a181b1a ("seccomp:
Move config option SECCOMP to arch/Kconfig") in v5.9
- The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL
are enabled by default when the aspeed platform is enabled, as of
commit 592693a1f8 ("soc: aspeed: Improve kconfig") in v5.9
- The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of
commit 39c3e30456 ("ARM: 8984/1: Kconfig: set default
ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8
- I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about
v5.8. It was in the config as it is required bt the PCA I2C muxes
that enabled it
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
These two devices are part of the AST2400 and the drivers have support
for that version of the soc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Raw SerIO is used by the OpenBMC debug-trigger application to take
signals from the host that applications are unresponsive on the BMC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with
really small overhead.
It works best with the SLUB allocator, so make SLUB the default by
removing SLAB=y.
total used free shared buff/cache available
SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900
SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280
These figures are the average memory usage from three boots of each
option in qemu, running the Romulus userspace. The output is from
free(1), reported in kilobytes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
-----BEGIN PGP SIGNATURE-----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=fhSk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uSNh
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.15-rc1
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
* tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
Link: https://lore.kernel.org/r/20210813162157.2820913-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The LTC3676 is a PMIC which is used on some i.MX6 based boards (like the
DHCOM i.MX6 Quad SoM), it was first used on the GW Ventana board, enable
LTC3676 driver in imx_v6_v7_defconfig.
Signed-off-by: Pascal Zimmermann <pzimmermann@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Marek Vasut <marex@denx.de>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # On DH iMX6Q DHCOM PDK2
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
Also fix up some Kconfig options that got dropped or moved around
while we're at it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210807225518.3607126-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYREvjgAKCRAfOrpwrNPN
DBc1AP4/HkSrWp57ElCSIwIY2vCZrOEbeRROxOgO5j/mdoB4qwEArsEEnZGHwpO3
TYjdyGt4yLR9kmaYBmWnDfI8loz0HQw=
=sVC8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=g9Op
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.15:
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
* tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
Link: https://lore.kernel.org/r/20210809134521.10155-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updating the tegra_defconfig was omitted, when the ChromeOS EC config
options were renamed by a previous commit. Fix it.
Fixes: 67c70aa86f ("arm/arm64: defconfig: Update configs to use the new CROS_EC options")
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously CONFIG_FB was auto-selected, now it's not. We completely lost
framebuffer in tegra_defconfig. Select the CONFIG_FB to fix it.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After years, linux finally got a driver for the PL35x NAND controller
found on the Xilinx Zynq-7000 SoC for example. Enable support for this
driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210616155437.27378-2-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The MaverickCrunch support for ep93xx never made it into glibc and
was removed from gcc in its 4.8 release in 2012. It is now one of
the last parts of arch/arm/ that fails to build with the clang
integrated assembler, which is unlikely to ever want to support it.
The two alternatives are to force the use of binutils/gas when
building the crunch support, or to remove it entirely.
According to Hartley Sweeten:
"Martin Guy did a lot of work trying to get the maverick crunch working
but I was never able to successfully use it for anything. It "kind"
of works but depending on the EP93xx silicon revision there are still
a number of hardware bugs that either give imprecise or garbage results.
I have no problem with removing the kernel support for the maverick
crunch."
Unless someone else comes up with a good reason to keep it around,
remove it now. This touches mostly the ep93xx platform, but removes
a bit of code from ARM common ptrace and signal frame handling as well.
If there are remaining users of MaverickCrunch, they can use LTS
kernels for at least another five years before kernel support ends.
Link: https://lore.kernel.org/linux-arm-kernel/20210802141245.1146772-1-arnd@kernel.org/
Link: https://lore.kernel.org/linux-arm-kernel/20210226164345.3889993-1-arnd@kernel.org/
Link: https://github.com/ClangBuiltLinux/linux/issues/1272
Link: https://gcc.gnu.org/legacy-ml/gcc/2008-03/msg01063.html
Cc: "Martin Guy" <martinwguy@martinwguy@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When using Yocto's Ptest DISTRO_FEATURE the CONFIG_SCSI_DEBUG=m option
is added, but it cannot be selected as it depends on CONFIG_SCSI_LOWLEVEL.
This generates a build warning saying that the CONFIG_SCSI_DEBUG=m option
is discarded.
Fix this by letting CONFIG_SCSI_LOWLEVEL to be selected.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_MMC_MESON_MX_SDHC so that SDHC host controller
on Amlogic SoCs boards enable support for eMMC and MMC drivers.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210715092233.1084-1-linux.amoon@gmail.com
Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig.
Also add it's clock timer, the PIT64B.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.
The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Versatile defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- The Acorn fonts are removed, the default framebuffer font
works fine. I don't know why this was selected in the first
place or how the Kconfig was altered so it was removed.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714081819.139210-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the RealView defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- The CONFIG_FB_MODE_HELPERS are not needed when using DRM
framebuffer emulation as DRM does.
- Drop two unused penguin logos.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714090040.182381-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the Integrator defconfig for the changes
in the v5.14-rc1 kernel:
- The Framebuffer CONFIG_FB needs to be explicitly selected
or we don't get any framebuffer anymore. DRM has stopped to
select FB because of circular dependency.
- Drop the unused Matrox FB drivers that are only used with
specific PCI cards.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As of commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB"), CONFIG_FB is no longer auto-enabled. While CONFIG_FB may
be considered unneeded for systems where graphics is provided by a DRM
driver, R-Mobile A1 still relies on a frame buffer device driver for
graphics support.
Restore support for graphics on R-Mobile A1 and graphical consoles on
DRM-based systems by explicitly enabling CONFIG_FB in the defconfig for
Renesas ARM systems.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4474be1d2c00c6ca97c2714844ea416a9ea9a9.1626084948.git.geert+renesas@glider.be
A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out. These changes are
almost exclusively turning on new drivers for various platforms, or
turning on modules for new drivers for the shared generic configs.
-----BEGIN PGP SIGNATURE-----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=8yuO
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
pxa_defconfig already enables libata including the pata_pcmcia driver, so
drop the legacy ide driver and idecs host driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
footbridge_defconfig enables CONFIG_IDE but no actual host controller
driver, so just drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enables the devfreq thermal support to allow using the devfreq device as
cooling device for the system.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmDDjioTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoU0BD/4+vDpvzzUl1L7C60PlD4a6jJPyODa6
a4T3KLjkMyp8Hxu2vWVXJjsb2CScz2A6kBlxM7q7bIPBkbh8UqdE0VKF4Z4wUGZK
GMmftL4jq1cOYWMEmxr3lQbFrlP9xeIDGRKdu4dunl2/nZmK9tCUDtheWnRdYOQR
g0CHF1CuNK/6SOd+N7EJVzECT6hoZJNMSAL4amd9UCTqfEzAJmJXyiyYNUiJy5BN
QWqlMjfXCTH+wna20ZI/KUINJxSJ53JwweKg1cLOeHh72OjEK5YJMuT0jKr4oJjX
aSxNqTR6MfR3NujAZtK+4olHldBX0Mt2guPqBG5MGzQd5OQg/K2L6bFt9ztDWS8E
frsBcw1Txj0UR+3SkTw7VhbZNzSe01/cNjWQsSDTUXtpYb8ZU1W2z/h3UIz+KSI8
jZxuTaClFle2FdyDnfg1y0Zt7BPrIxbaGFgFDZs2t7ptbnVdKzLmMbFM6UynlmzG
zBpWAukIRsqJP50GlXuXvHzOfvRQeIrOT2Dv/9/co7OCgaQ9f6142as1C6bAgScZ
Tey06DqQQk40V4WSKZt02KrUzIjrshLVuH58MqEbg+jDG/XvTtlqxWwbIHuDjduP
HPPyFJ2znKqMpDmsuVCVRNXEX9dg49fKGm0+S5jVZ9Ob19hBT2FJ/bal5iq94rPl
nnoDSiP/7UCNTw==
=llL+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.14-rc1
Enables the devfreq thermal support to allow using the devfreq device as
cooling device for the system.
* tag 'tegra-for-5.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
Link: https://lore.kernel.org/r/20210611164437.3568059-5-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add the use of tickless and HR times to ARM9 defconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNdFwAKCRAfOrpwrNPN
DAAVAQD7rFjVG40z+r1Xil7a8Han/1t+xoSf+NDgrNGYCHswUwD/Z7YyRnsGwuR8
DR64Sw6XjT5sIh9Q24Txda1C/NnQ2Qk=
=OMYy
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.14:
- Add the use of tickless and HR times to ARM9 defconfig
* tag 'at91-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91_dt_defconfig: configs for sam9x60
Link: https://lore.kernel.org/r/20210611125659.25590-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>