Commit Graph

148 Commits

Author SHA1 Message Date
Jamie Bainbridge e3d37210df sctp: count singleton chunks in assoc user stats
Singleton chunks (INIT, HEARTBEAT PMTU probes, and SHUTDOWN-
COMPLETE) are not counted in SCTP_GET_ASOC_STATS "sas_octrlchunks"
counter available to the assoc owner.

These are all control chunks so they should be counted as such.

Add counting of singleton chunks so they are properly accounted for.

Fixes: 196d675934 ("sctp: Add support to per-association statistics via a new SCTP_GET_ASSOC_STATS call")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/c9ba8785789880cf07923b8a5051e174442ea9ee.1649029663.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-05 09:51:12 +02:00
Xin Long 703319094c sctp: make the raise timer more simple and accurate
Currently, the probe timer is reused as the raise timer when PLPMTUD is in
the Search Complete state. raise_count was introduced to count how many
times the probe timer has timed out. When raise_count reaches to 30, the
raise timer handler will be triggered.

During the whole processing above, the timer keeps timing out every probe_
interval. It is a waste for the Search Complete state, as the raise timer
only needs to time out after 30 * probe_interval.

Since the raise timer and probe timer are never used at the same time, it
is no need to keep probe timer 'alive' in the Search Complete state. This
patch to introduce sctp_transport_reset_raise_timer() to start the timer
as the raise timer when entering the Search Complete state. When entering
the other states, sctp_transport_reset_probe_timer() will still be called
to reset the timer to the probe timer.

raise_count can be removed from sctp_transport as no need to count probe
timer timeout for raise timer timeout. last_rtx_chunks can be removed as
sctp_transport_reset_probe_timer() can be called in the place where asoc
rtx_data_chunks is changed.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/edb0e48988ea85997488478b705b11ddc1ba724a.1637781974.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25 21:00:45 -08:00
Xin Long fe59379b9a sctp: do the basic send and recv for PLPMTUD probe
This patch does exactly what rfc8899#section-6.2.1.2 says:

   The SCTP sender needs to be able to determine the total size of a
   probe packet.  The HEARTBEAT chunk could carry a Heartbeat
   Information parameter that includes, besides the information
   suggested in [RFC4960], the probe size to help an implementation
   associate a HEARTBEAT ACK with the size of probe that was sent.  The
   sender could also use other methods, such as sending a nonce and
   verifying the information returned also contains the corresponding
   nonce.  The length of the PAD chunk is computed by reducing the
   probing size by the size of the SCTP common header and the HEARTBEAT
   chunk.

Note that HB ACK chunk will carry back whatever HB chunk carried, including
the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK
against link->pl.probe_size to validate this HB ACK chunk.

v1->v2:
  - Remove the unused 'sp' and add static for sctp_packet_bundle_pad().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 11:28:52 -07:00
Xin Long 8ff0b1f08e sctp: move sk_route_caps check and set into sctp_outq_flush_transports
The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.

So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:

  https://bugzilla.kernel.org/show_bug.cgi?id=212227

As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:

  unregister_netdevice: waiting for xxx to become free. Usage count = 1

Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8e9 ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19 11:34:49 -07:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Kevin Kou f398efc14a sctp: add enabled check for path tracepoint loop.
sctp_outq_sack is the main function handles SACK, it is called very
frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack"
added below code to this function, sctp tracepoint is disabled most of time,
but the loop of transport list will be always called even though the
tracepoint is disabled, this is unnecessary.

+	/* SCTP path tracepoint for congestion control debugging. */
+	list_for_each_entry(transport, transport_list, transports) {
+		trace_sctp_probe_path(transport, asoc);
+	}

This patch is to add tracepoint enabled check at outside of the loop of
transport list, and avoid traversing the loop when trace is disabled,
it is a small optimization.

Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30 20:33:05 -08:00
Kevin Kou f643ee295c sctp: move trace_sctp_probe_path into sctp_outq_sack
The original patch bringed in the "SCTP ACK tracking trace event"
feature was committed at Dec.20, 2017, it replaced jprobe usage
with trace events, and bringed in two trace events, one is
TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path).
The original patch intended to trigger the trace_sctp_probe_path in
TRACE_EVENT(sctp_probe) as below code,

+TRACE_EVENT(sctp_probe,
+
+	TP_PROTO(const struct sctp_endpoint *ep,
+		 const struct sctp_association *asoc,
+		 struct sctp_chunk *chunk),
+
+	TP_ARGS(ep, asoc, chunk),
+
+	TP_STRUCT__entry(
+		__field(__u64, asoc)
+		__field(__u32, mark)
+		__field(__u16, bind_port)
+		__field(__u16, peer_port)
+		__field(__u32, pathmtu)
+		__field(__u32, rwnd)
+		__field(__u16, unack_data)
+	),
+
+	TP_fast_assign(
+		struct sk_buff *skb = chunk->skb;
+
+		__entry->asoc = (unsigned long)asoc;
+		__entry->mark = skb->mark;
+		__entry->bind_port = ep->base.bind_addr.port;
+		__entry->peer_port = asoc->peer.port;
+		__entry->pathmtu = asoc->pathmtu;
+		__entry->rwnd = asoc->peer.rwnd;
+		__entry->unack_data = asoc->unack_data;
+
+		if (trace_sctp_probe_path_enabled()) {
+			struct sctp_transport *sp;
+
+			list_for_each_entry(sp, &asoc->peer.transport_addr_list,
+					    transports) {
+				trace_sctp_probe_path(sp, asoc);
+			}
+		}
+	),

But I found it did not work when I did testing, and trace_sctp_probe_path
had no output, I finally found that there is trace buffer lock
operation(trace_event_buffer_reserve) in include/trace/trace_events.h:

static notrace void							\
trace_event_raw_event_##call(void *__data, proto)			\
{									\
	struct trace_event_file *trace_file = __data;			\
	struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\
	struct trace_event_buffer fbuffer;				\
	struct trace_event_raw_##call *entry;				\
	int __data_size;						\
									\
	if (trace_trigger_soft_disabled(trace_file))			\
		return;							\
									\
	__data_size = trace_event_get_offsets_##call(&__data_offsets, args); \
									\
	entry = trace_event_buffer_reserve(&fbuffer, trace_file,	\
				 sizeof(*entry) + __data_size);		\
									\
	if (!entry)							\
		return;							\
									\
	tstruct								\
									\
	{ assign; }							\
									\
	trace_event_buffer_commit(&fbuffer);				\
}

The reason caused no output of trace_sctp_probe_path is that
trace_sctp_probe_path written in TP_fast_assign part of
TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the
trace_event_buffer_reserve() when compiler expands Macro,

        entry = trace_event_buffer_reserve(&fbuffer, trace_file,        \
                                 sizeof(*entry) + __data_size);         \
                                                                        \
        if (!entry)                                                     \
                return;                                                 \
                                                                        \
        tstruct                                                         \
                                                                        \
        { assign; }                                                     \

so trace_sctp_probe_path finally can not acquire trace_event_buffer
and return no output, that is to say the nest of tracepoint entry function
is not allowed. The function call flow is:

trace_sctp_probe()
-> trace_event_raw_event_sctp_probe()
 -> lock buffer
 -> trace_sctp_probe_path()
   -> trace_event_raw_event_sctp_probe_path()  --nested
   -> buffer has been locked and return no output.

This patch is to remove trace_sctp_probe_path from the TP_fast_assign
part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function,
and trigger sctp_probe_path_trace in sctp_outq_sack.

After this patch, you can enable both events individually,
  # cd /sys/kernel/debug/tracing
  # echo 1 > events/sctp/sctp_probe/enable
  # echo 1 > events/sctp/sctp_probe_path/enable

Or, you can enable all the events under sctp.

  # echo 1 > events/sctp/enable

Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26 13:06:45 -08:00
Xin Long 4e7696d90b sctp: get netns from asoc and ep base
Commit 312434617c ("sctp: cache netns in sctp_ep_common") set netns
in asoc and ep base since they're created, and it will never change.
It's a better way to get netns from asoc and ep base, comparing to
calling sock_net().

This patch is to replace them.

v1->v2:
  - no change.

Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09 20:14:01 -08:00
Thomas Gleixner 47505b8bcf treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
Based on 1 normalized pattern(s):

  this sctp implementation is free software you can redistribute it
  and or modify it under the terms of the gnu general public license
  as published by the free software foundation either version 2 or at
  your option any later version this sctp implementation is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with gnu cc see the file copying if not see
  http www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 42 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.683323110@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:39:00 +02:00
Xin Long 7efba10d6b sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_scheduler and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_scheduler,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_STREAM_SCHEDULER in this
patch. It also adds default_ss in sctp_sock to support
SCTP_FUTURE_ASSOC.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30 00:44:08 -08:00
Xin Long 12480e3b16 sctp: define SCTP_SS_DEFAULT for Stream schedulers
According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to
defined as SCTP_SS_FCFS or SCTP_SS_RR.

SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch.

Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03 19:40:29 -07:00
Xin Long 605c0ac182 sctp: count both sk and asoc sndbuf with skb truesize and sctp_chunk size
Now it's confusing that asoc sndbuf_used is doing memory accounting with
SCTP_DATA_SNDSIZE(chunk) + sizeof(sk_buff) + sizeof(sctp_chunk) while sk
sk_wmem_alloc is doing that with skb->truesize + sizeof(sctp_chunk).

It also causes sctp_prsctp_prune to count with a wrong freed memory when
sndbuf_policy is not set.

To make this right and also keep consistent between asoc sndbuf_used, sk
sk_wmem_alloc and sk_wmem_queued, use skb->truesize + sizeof(sctp_chunk)
for them.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-18 11:23:47 -07:00
Gustavo A. R. Silva 2cc543f5cd sctp: fix fall-through annotation
Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03 09:33:13 -07:00
Konstantin Khorenko 05364ca03c net/sctp: Make wrappers for accessing in/out streams
This patch introduces wrappers for accessing in/out streams indirectly.
This will enable to replace physically contiguous memory arrays
of streams with flexible arrays (or maybe any other appropriate
mechanism) which do memory allocation on a per-page basis.

Signed-off-by: Oleg Babin <obabin@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11 12:25:15 -07:00
Marcelo Ricardo Leitner 5884f35f0d sctp: checkpatch fixups
A collection of fixups from previous patches, left for later to not
introduce unnecessary changes while moving code around.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 23:15:27 -04:00
Marcelo Ricardo Leitner e136e965df sctp: add asoc and packet to sctp_flush_ctx
Pre-compute these so the compiler won't reload them (due to
no-strict-aliasing).

Changes since v2:
- Do not replace a return with a break in sctp_outq_flush_data

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 23:15:27 -04:00
Marcelo Ricardo Leitner bb543847a9 sctp: add sctp_flush_ctx, a context struct on outq_flush routines
With this struct we avoid passing lots of variables around and taking care
of updating the current transport/packet.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 23:15:27 -04:00
Marcelo Ricardo Leitner 4fdbb0efb9 sctp: rework switch cases in sctp_outq_flush_data
Remove an inner one, which tended to be error prone due to the cascading
and it can be replaced by a simple if ().

Rework the outer one so that the actual flush code is not inside it. Now
we first validate if we can or cannot send data, return if not, and then
the flush code.

Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner 6605f69482 sctp: make use of gfp on retransmissions
Retransmissions may be triggered when in user context, so lets make use
of gfp.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner 4bf21b61f2 sctp: move transport flush code out of sctp_outq_flush
To the new sctp_outq_flush_transports.

Comment on Nagle is outdated and removed. Nagle is performed earlier, while
checking if the chunk fits the packet: if the outq length is not enough to
fill the packet, it returns SCTP_XMIT_DELAY.

So by when it gets to sctp_outq_flush_transports, it has to go through all
enlisted transports.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner cb93cc5d06 sctp: move flushing of data chunks out of sctp_outq_flush
To the new sctp_outq_flush_data. Again, smaller functions and with well
defined objectives.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner 96e0418e81 sctp: move outq data rtx code out of sctp_outq_flush
This patch renames current sctp_outq_flush_rtx to __sctp_outq_flush_rtx
and create a new sctp_outq_flush_rtx, with the code that was on
sctp_outq_flush. Again, the idea is to have functions with small and
defined objectives.

Yes, there is an open-coded path selection in the now sctp_outq_flush_rtx.
That is kept as is for now because it may be very different when we
implement retransmission path selection algorithms for CMT-SCTP.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner 7a0b9df65a sctp: move the flush of ctrl chunks into its own function
Named sctp_outq_flush_ctrl and, with that, keep the contexts contained.

One small fix embedded is the reset of one_packet at every iteration.
This allows bundling of some control chunks in case they were preceeded by
another control chunk that cannot be bundled.

Other than this, it has the same behavior.

Changes since v2:
- Fixed panic reported by kbuild test robot if building with
  only up to this patch applied, due to bad parameter to
  sctp_outq_select_transport and by not initializing packet after
  calling sctp_outq_flush_ctrl.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:15 -04:00
Marcelo Ricardo Leitner 0d634b0c94 sctp: factor out sctp_outq_select_transport
We had two spots doing such complex operation and they were very close to
each other, a bit more tailored to here or there.

This patch unifies these under the same function,
sctp_outq_select_transport, which knows how to handle control chunks and
original transmissions (but not retransmissions).

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:14 -04:00
Marcelo Ricardo Leitner b9fd683982 sctp: add sctp_packet_singleton
Factor out the code for generating singletons. It's used only once, but
helps to keep the context contained.

The const variables are to ease the reading of subsequent calls in there.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14 22:57:14 -04:00
Marcelo Ricardo Leitner 51446780fc sctp: fix identification of new acks for SFR-CACC
It's currently written as:

if (!tchunk->tsn_gap_acked) {   [1]
	tchunk->tsn_gap_acked = 1;
	...
}

if (TSN_lte(tsn, sack_ctsn)) {
	if (!tchunk->tsn_gap_acked) {
		/* SFR-CACC processing */
		...
	}
}

Which causes the SFR-CACC processing on ack reception to never process,
as tchunk->tsn_gap_acked is always true by then. Block [1] was
moved to that position by the commit marked below.

This patch fixes it by doing SFR-CACC processing earlier, before
tsn_gap_acked is set to true.

Fixes: 31b02e1549 ("sctp: Failover transmitted list on transport delete")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 13:22:07 -04:00
David S. Miller c02b3741eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Overlapping changes all over.

The mini-qdisc bits were a little bit tricky, however.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 00:10:42 -05:00
Marcelo Ricardo Leitner 37f47bc90c sctp: avoid compiler warning on implicit fallthru
These fall-through are expected.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15 13:56:13 -05:00
Xin Long 8e0c3b73ce sctp: implement generate_ftsn for sctp_stream_interleave
generate_ftsn is added as a member of sctp_stream_interleave, used to
create fwdtsn or ifwdtsn chunk according to abandoned chunks, called
in sctp_retransmit and sctp_outq_sack.

sctp_generate_iftsn works for ifwdtsn, and sctp_generate_fwdtsn is
still used for making fwdtsn.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:21 -05:00
Xin Long 779edd7348 sctp: do not abandon the other frags in unsent outq if one msg has outstanding frags
Now for the abandoned chunks in unsent outq, it would just free the chunks.
Because no tsn is assigned to them yet, there's no need to send fwd tsn to
peer, unlike for the abandoned chunks in sent outq.

The problem is when parts of the msg have been sent and the other frags
are still in unsent outq, if they are abandoned/dropped, the peer would
never get this msg reassembled.

So these frags in unsent outq can't be dropped if this msg already has
outstanding frags.

This patch does the check in sctp_chunk_abandoned and
sctp_prsctp_prune_unsent.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01 15:06:24 -05:00
Xin Long e5f612969c sctp: abandon the whole msg if one part of a fragmented message is abandoned
As rfc3758#section-3.1 demands:

   A3) When a TSN is "abandoned", if it is part of a fragmented message,
       all other TSN's within that fragmented message MUST be abandoned
       at the same time.

Besides, if it couldn't handle this, the rest frags would never get
assembled in peer side.

This patch supports it by adding abandoned flag in sctp_datamsg, when
one chunk is being abandoned, set chunk->msg->abandoned as well. Next
time when checking for abandoned, go checking chunk->msg->abandoned
first.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01 15:06:24 -05:00
Xin Long d30fc5126e sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune
Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.

However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.

It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.

This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.

Fixes: 8dbdf1f5b0 ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01 15:06:23 -05:00
Marcelo Ricardo Leitner 5bbbbe32a4 sctp: introduce stream scheduler foundations
This patch introduces the hooks necessary to do stream scheduling, as
per RFC Draft ndata.  It also introduces the first scheduler, which is
what we do today but now factored out: first come first served (FCFS).

With stream scheduling now we have to track which chunk was enqueued on
which stream and be able to select another other than the in front of
the main outqueue. So we introduce a list on sctp_stream_out_ext
structure for this purpose.

We reuse sctp_chunk->transmitted_list space for the list above, as the
chunk cannot belong to the two lists at the same time. By using the
union in there, we can have distinct names for these moments.

sctp_sched_ops are the operations expected to be implemented by each
scheduler. The dequeueing is a bit particular to this implementation but
it is to match how we dequeue packets today. We first dequeue and then
check if it fits the packet and if not, we requeue it at head. Thus why
we don't have a peek operation but have dequeue_done instead, which is
called once the chunk can be safely considered as transmitted.

The check removed from sctp_outq_flush is now performed by
sctp_stream_outq_migrate, which is only called during assoc setup.
(sctp_sendmsg() also checks for it)

The only operation that is foreseen but not yet added here is a way to
signalize that a new packet is starting or that the packet is done, for
round robin scheduler per packet, but is intentionally left to the
patch that actually implements it.

Support for I-DATA chunks, also described in this RFC, with user message
interleaving is straightforward as it just requires the schedulers to
probe for the feature and ignore datamsg boundaries when dequeueing.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner f952be79ce sctp: introduce struct sctp_stream_out_ext
With the stream schedulers, sctp_stream_out will become too big to be
allocated by kmalloc and as we need to allocate with BH disabled, we
cannot use __vmalloc in sctp_stream_init().

This patch moves out the stats from sctp_stream_out to
sctp_stream_out_ext, which will be allocated only when the application
tries to sendmsg something on it.

Just the introduction of sctp_stream_out_ext would already fix the issue
described above by splitting the allocation in two. Moving the stats
to it also reduces the pressure on the allocator as we will ask for less
memory atomically when creating the socket and we will use GFP_KERNEL
later.

Then, for stream schedulers, we will just use sctp_stream_out_ext.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Xin Long 86b36f2a9b sctp: remove the typedef sctp_xmit_t
This patch is to remove the typedef sctp_xmit_t, and
replace with enum sctp_xmit in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00
Xin Long 125c298202 sctp: remove the typedef sctp_retransmit_reason_t
This patch is to remove the typedef sctp_retransmit_reason_t, and
replace with enum sctp_retransmit_reason in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:41 -07:00
Xin Long afd93b7be6 sctp: remove the typedef sctp_sack_variable_t
This patch is to remove the typedef sctp_sack_variable_t, and
replace with union sctp_sack_variable in the places where it's
using this typedef.

It is also to fix some indents in sctp_acked().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 16:01:20 -07:00
Reshetova, Elena 633547973f net: convert sk_buff.users from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:07 -07:00
Xin Long cee360ab4d sctp: define the member stream as an object instead of pointer in asoc
As Marcelo's suggestion, stream is a fixed size member of asoc and would
not grow with more streams. To avoid an allocation for it, this patch is
to define it as an object instead of pointer and update the places using
it, also create sctp_stream_update() called in sctp_assoc_update() to
migrate the stream info from one stream to another.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 13:56:26 -04:00
David S. Miller 6f14f443d3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06 08:24:51 -07:00
Xin Long d229d48d18 sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't
added, as it needs to save abandoned_(un)sent for every stream.

After sctp stream reconf is added in sctp, assoc has structure
sctp_stream_out to save per stream info.

This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp
per stream statistics into sctp_stream_out.

v1->v2:
  fix an indent issue.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03 14:52:35 -07:00
Xin Long afe89962ee sctp: use right in and out stream cnt
Since sctp reconf was added in sctp, the real cnt of in/out stream
have not been c.sinit_max_instreams and c.sinit_num_ostreams any
more.

This patch is to replace them with stream->in/outcnt.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01 20:12:30 -07:00
Xin Long 23bb09cfbe sctp: out_qlen should be updated when pruning unsent queue
This patch is to fix the issue that sctp_prsctp_prune_sent forgot
to update q->out_qlen when removing a chunk from unsent queue.

Fixes: 8dbdf1f5b0 ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21 18:32:36 -07:00
Julian Anastasov c86a773c78 sctp: add dst_pending_confirm flag
Add new transport flag to allow sockets to confirm neighbour.
When same struct dst_entry can be used for many different
neighbours we can not use it for pending confirmations.
The flag is propagated from transport to every packet.
It is reset when cached dst is reset.

Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 5110effee8 ("net: Do delayed neigh confirmation.")
Fixes: f2bb4bedf3 ("ipv4: Cache output routes in fib_info nexthops.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 13:07:46 -05:00
Xin Long 7f9d68ac94 sctp: implement sender-side procedures for SSN Reset Request Parameter
This patch is to implement sender-side procedures for the Outgoing
and Incoming SSN Reset Request Parameter described in rfc6525 section
5.1.2 and 5.1.3.

It is also add sockopt SCTP_RESET_STREAMS in rfc6525 section 6.3.2
for users.

Note that the new asoc member strreset_outstanding is to make sure
only one reconf request chunk on the fly as rfc6525 section 5.1.1
demands.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18 14:55:11 -05:00
Colin Ian King eb004603c8 sctp: Fix spelling mistake: "Atempt" -> "Attempt"
Trivial fix to spelling mistake in WARN_ONCE message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 10:01:01 -05:00
Xin Long cc6ac9bccf sctp: reuse sent_count to avoid retransmitted chunks for RTT measurements
Now sctp uses chunk->resent to record if a chunk is retransmitted, for
RTT measurements with retransmitted DATA chunks. chunk->sent_count was
introduced to record how many times one chunk has been sent for prsctp
RTX policy before. We actually can know if one chunk is retransmitted
by checking chunk->sent_count is greater than 1.

This patch is to remove resent from sctp_chunk and reuse sent_count
to avoid retransmitted chunks for RTT measurements.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13 09:44:13 -04:00
David S. Miller b50afd203a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three sets of overlapping changes.  Nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02 22:20:41 -04:00
Xin Long be4947bf46 sctp: change to check peer prsctp_capable when using prsctp polices
Now before using prsctp polices, sctp uses asoc->prsctp_enable to
check if prsctp is enabled. However asoc->prsctp_enable is set only
means local host support prsctp, sctp should not abandon packet if
peer host doesn't enable prsctp.

So this patch is to use asoc->peer.prsctp_capable to check if prsctp
is enabled on both side, instead of asoc->prsctp_enable, as asoc's
peer.prsctp_capable is set only when local and peer both enable prsctp.

Fixes: a6c2f79287 ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30 02:07:05 -04:00
Xin Long 0605483f6a sctp: remove prsctp_param from sctp_chunk
Now sctp uses chunk->prsctp_param to save the prsctp param for all the
prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk.
We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices,
and reuse msg->expires_at for TTL policy, as the prsctp polices and old
expires policy are mutual exclusive.

This patch is to remove prsctp_param from sctp_chunk, and reuse msg's
expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF
polices.

Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy,
as it needs a u64 variables to save the expires_at time.

This one also fixes the "netperf-Throughput_Mbps -37.2% regression"
issue.

Fixes: a6c2f79287 ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30 02:07:05 -04:00