Clang static analysis reports this problem
dw-i3c-master.c:799:9: warning: The result of the left shift is
undefined because the left operand is negative
COMMAND_PORT_DEV_INDEX(pos) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~
pos can be negative because dw_i3c_master_get_free_pos() can return an
error. So check for an error.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com
The referred config BIG_ENDIAN does not exist. The config for the
endianness of the CPU architecture is called CPU_BIG_ENDIAN.
Correct the config name to the existing config for the endianness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com
If enable interrupt in the svc_i3c_master_bus_init() but do not call
enable ibi in the device driver, it will cause a kernel dump in the
svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus,
because the data->ibi_pool is not initialized.
So only enable the interrupt in svc_i3c_master_enable_ibi() function.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com
The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot
be auto probed when it is built in moudle.
So add it.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com
Add runtime pm support to dynamically manage the clock.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com
If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C
devices cannot see the stop signal. It may cause message sending errors.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com
When i3c controller reads data from slave device, slave device can stop
returning data with an ACK after any byte.
Add this support for svc i3c controller. Otherwise, it will timeout
when the slave device ends the read operation early.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com
Sometimes only need to reset err and fifo regs, so split the origin
reset function to three functions.
Put them at the top of the file, to let more functions can call them.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-4-xiaoning.wang@nxp.com
do_daa_locked() function is in a spin lock environment, use
readl_poll_timeout_atomic() to replace the origin
readl_poll_timeout().
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-3-xiaoning.wang@nxp.com
Reset I3C module will R/W its regs, so enable its clocks first.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-2-xiaoning.wang@nxp.com
The code in 'hci_dat_v1_get_index()' really looks like a hand coded version
of 'for_each_set_bit()', except that a +1 is missing when searching for the
next set bit.
This really looks odd and it seems that it will loop until 'dat_w0_read()'
returns the expected result.
So use 'for_each_set_bit()' instead. It is less verbose and should be more
correct.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/0cdf3cb10293ead1acd271fdb8a70369c298c082.1637186628.git.christophe.jaillet@wanadoo.fr
The address slot bitmap is an array of unsigned long's which are the
same size as an int on 32-bit platforms but not 64-bit. Loading the
bitmap into an int could result in the incorrect status being returned
for a slot and slots being reported as the wrong status.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210922165600.179394-1-quic_jiles@quicinc.com
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210912155135.7541-1-len.baker@gmx.com
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210905144054.5124-1-len.baker@gmx.com
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers:
- svc: two small fixes
-----BEGIN PGP SIGNATURE-----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=iMi5
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following make W=1 warning:
drivers/i3c/master/svc-i3c-master.c:207: warning: expecting prototype for struct svc_i3c_i3c_dev_data. Prototype was for struct svc_i3c_i2c_dev_data instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602085544.4101980-1-yangyingliang@huawei.com
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in svc_i3c_master_remove().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com
The assignment of xfer_len to cmd->read_len appears to be redundant
as the next statement re-assigns the value 0 to it. Clean up the
code by removing the redundant first assignment.
Addresses-Coverity: ("Unused value")
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210224151349.202332-1-colin.king@canonical.com
Disabling all event calls is already handled by the core right before
starting the DAA process. Do not do it again when the DAA process
completes, it is redundant.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201228105501.6104-1-miquel.raynal@bootlin.com
Add support for Silvaco I3C dual-role IP. The master role is supported
in SDR mode only. I2C transfers have not been tested but are shared
because they are very close to the I3C transfers in terms of register
configuration.
The IBI processing follows this logic:
- When a slave advertizes an interrupt (SDA pulled low) an interrupt
gets generated by the master. This time is unbounded and may be
deferred.
- The IRQ handler itself does not process anything: it only queues a
work that will be run in non-atomic context. This is needed because
short wait periods must be experienced.
- The IBI job is divided in two parts: the first one is "critical" in
the sense that it may not support getting interrupted. If this
happens, after this first section the driver checks the master error
register and depending on its content either flushes everything and
errors out, or ends the processing (this second section may be
interrupted).
- If the critical section got interrupted, the slave will
automatically respin it's IBI request when it will be allowed to.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210121101808.14654-6-miquel.raynal@bootlin.com
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct i3c_driver::remove() return
void, too. This makes it obvious that returning an error code is
a bad idea and future driver authors cannot get that wrong.
Up to now there are no drivers with a remove callback, so there is no
need to adapt drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210128091048.17006-2-u.kleine-koenig@pengutronix.de
A registered driver without a probe callback doesn't make sense, so
refuse to register such a driver. (Otherwise i3c_device_probe() yields a
NULL pointer exception.)
A driver without remove is possible, e.g. when all resources are freed
using devm callbacks. So guard the call to driver->remove by a check
for being non-NULL.
Note that the only in-tree i3c driver
(drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c) doesn't have a remove
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210128091048.17006-1-u.kleine-koenig@pengutronix.de
The MIPI i3c HCI driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver to be enabled under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210127040636.1535722-1-davidgow@google.com
Clang warns:
../drivers/i3c/master/mipi-i3c-hci/core.c:780:21: warning: attribute
declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused of_device_id i3c_hci_of_match[] = {
^
../include/linux/compiler_attributes.h:267:56: note: expanded from macro
'__maybe_unused'
#define __maybe_unused __attribute__((__unused__))
^
../include/linux/mod_devicetable.h:262:8: note: previous definition is
here
struct of_device_id {
^
1 warning generated.
'struct of_device_id' should not be split, as it is a type. Move the
__maybe_unused attribute after the static and const qualifiers so that
there are no warnings about this variable, period.
Fixes: 95393f3e07 ("i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning")
Link: https://github.com/ClangBuiltLinux/linux/issues/1221
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201222025931.3043480-1-natechancellor@gmail.com
If CONFIG_OF is disabled then the matching table is notreferenced.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The variable next_addr is not initialized and is being used in a call
to i3c_master_get_free_addr as a starting point to find the next address.
Fix this by initializing next_addr to 0 to avoid an uninitialized garbage
starting address from being used.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201124123504.396249-1-colin.king@canonical.com
This adds basic support for hardware implementing the MIPI I3C HCI
specification. This driver is currently limited by the capabilities
of the I3C subsystem, meaning things like scheduled commands,
auto-commands and NCM mode are not yet supported.
This supports version 1.0 of the MIPI I3C HCI spec, as well as the
imminent release of version 1.1. Support for draft version 2.0 of the
spec is also largely included with the caveat that future adjustments
to this code are likely as the spec is still a work in progress.
This is also lightly tested as actual hardware is still very scarce,
even for HCI v1.0. Hence the EXPERIMENTAL tag. Further contributions
to this driver are expected once vendor implementations and new I3C
devices become available.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20201111220510.3622216-3-nico@fluxnic.net
* Fix an error path in the cadence driver
-----BEGIN PGP SIGNATURE-----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=yC+2
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Fix DAA for the pre-reserved address case
- Fix an error path in the cadence driver
* tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Fix error return in cdns_i3c_master_probe()
i3c: master: fix for SETDASA and DAA process
i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
This patch fix following issue.
Controller slots blocked for devices with static_addr
but no init_dyn_addr may limit the number of I3C devices
on the bus which gets dynamic address in DAA. So
instead of attaching all the devices with static_addr,
now we only attach the devices which successfully
complete SETDASA. For remaining devices with init_dyn_addr,
i3c_master_add_i3c_dev_locked() will try to set requested
dynamic address after DAA.
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/1598337109-14770-1-git-send-email-pthombar@cadence.com
Boardinfo was lost if I3C object for devices with boardinfo
available are not created or not added to the I3C device list
because of some failure e.g. SETDASA failed, retrieve info failed etc
This patch adds i3c_master_attach_boardinfo which scan boardinfo list
in the master object and 'attach' it to the I3C device object.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/1590053542-389-1-git-send-email-pthombar@cadence.com
According to the I3C spec v1.1 document, GETMRL's payload is 2 bytes,
with an optional 3rd byte if the IBI private payload is larger than
1 byte. The whole GETMRL may also be optional so max_ibi_len already
defaults to 1 if BCR_IBI_PAYLOAD prior to the i3c_master_getmrl_locked()
call.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/nycvar.YSQ.7.76.2004151623060.2671@knanqh.ubzr
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200227131307.GA24935@embeddedor
We already have the master device in a variable, reuse it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200214145853.24762-1-wsa+renesas@sang-engineering.com
For today the reattach function only update the device address on the
controller.
Update the location to the first available too, will optimize the
enumeration process avoiding additional checks to keep the available
positions on address table consecutive.
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
i3c_bus_set_mode function is only used in master.c.
Make it static to avoid warning when compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
This patch adds support for THD_DEL (Data Hold Delay) to Cadence
I3C master constoller driver.
As per MIPI I3C Specification 1.0, Table 75 (page 142) defines
non-zero minimal tHD_PP timing on master output (Fig 65). This
setting allows to meet this timing on master's soc outputs,
regardless of PCB balancing.
Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
