Refactor exception entry macros by using the ones defined in head_32.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch splits NORMAL_EXCEPTION_PROLOG in the same way as in
head_8xx.S and head_32.S and renames it EXCEPTION_PROLOG() as well
to match head_32.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Unlike said in the comment, r1 is not reused by the critical
exception handler, as it uses a dedicated critirq_ctx stack.
Decrementing r1 early is then unneeded.
Should the above be valid, the code is crap buggy anyway as
r1 gets some intermediate values that would jeopardise the
whole process (for instance after mfspr r1,SPRN_SPRG_THREAD)
Using SPRN_SPRG_SCRATCH2 to save r1 is then not needed, r11 can be
used instead. This avoids one mtspr and one mfspr and makes the
prolog closer to what's done on 6xx and 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
6xx/8xx EXC_XFER_TEMPLATE() macro adds a i##n symbol which is
unused and can be removed.
40x and booke EXC_XFER_TEMPLATE() macros takes msr from the caller
while the 6xx/8xx version uses only MSR_KERNEL as msr value.
This patch modifies the 6xx/8xx version to make it similar to the
40x and booke versions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As preparation for using head_32.h for head_40x.S, move
LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value.
In the mean time, this patch modifies it so that it takes into account
the size of the passed value to determine if 'li' can be used or if
'lis/ori' is needed instead of using the size of MSR_KERNEL. This is
done by using gas macro.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S
This patch creates head_32.h and moves EXCEPTION_PROLOG macro
into it. It also converts it from a GCC macro to a GAS macro
in order to ease refactorisation with 40x later, since
GAS macros allows the use of #ifdef/#else/#endif inside it.
And it also has the advantage of not requiring the uggly "; \"
at the end of each line.
This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which
are also similar while adding START_EXCEPTION() out of EXCEPTION().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reduce #ifdef mess by defining a helper to print
hash info at startup.
In the meantime, remove the display of hash table address
to reduce leak of non necessary information.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Due to %p, (ptrval) is printed in lieu of the hash table address.
showing the hash table address isn't an operationnal need so just
don't print it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For hash32, the zero shadow page gets mapped with PAGE_READONLY instead
of PAGE_KERNEL_RO, because the PP bits don't provide a RO kernel, so
PAGE_KERNEL_RO is equivalent to PAGE_KERNEL. By using PAGE_READONLY,
the page is RO for both kernel and user, but this is not a security issue
as it contains only zeroes.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
KASAN requires early activation of hash table, before memblock()
functions are available.
This patch implements an early hash_table statically defined in
__initdata.
During early boot, a single page table is used.
For hash32, when doing the final init, one page table is allocated
for each PGD entry because of the _PAGE_HASHPTE flag which can't be
common to several virt pages. This is done after memblock get
available but before switching to the final hash table, otherwise
there are issues with TLB flushing due to the shared entries.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For KASAN, hash table handling will be activated early for
accessing to KASAN shadow areas.
In order to avoid any modification of the hash functions while
they are still used with the early hash table, the code patching
is moved out of MMU_init_hw() and put close to the big-bang switch
to the final hash table.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds KASAN support for PPC32. The following patch
will add an early activation of hash table for book3s. Until
then, a warning will be raised if trying to use KASAN on an
hash 6xx.
To support KASAN, this patch initialises that MMU mapings for
accessing to the KASAN shadow area defined in a previous patch.
An early mapping is set as soon as the kernel code has been
relocated at its definitive place.
Then the definitive mapping is set once paging is initialised.
For modules, the shadow area is allocated at module_alloc().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All files containing functions run before kasan_early_init() is called
must have KASAN instrumentation disabled.
For those file, branch profiling also have to be disabled otherwise
each if () generates a call to ftrace_likely_update().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch prepares a shadow area for KASAN.
The shadow area will be at the top of the kernel virtual
memory space above the fixmap area and will occupy one
eighth of the total kernel virtual memory space.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed
at 0xfe000000.
This patch uses FIXADDR_START to define KVIRT_TOP.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit 400c47d81c ("powerpc32: memset: only use dcbz once cache is
enabled"), memset() can be used before activation of the cache,
so no need to use memset_io() for zeroing the BSS.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x;
This will allow GCC to replace it with __memcpy() when KASAN is
selected.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When KASAN is active, the string functions in lib/ are doing the
KASAN checks. This is too early for prom_init.
This patch implements dedicated string functions for prom_init,
which will be compiled in with KASAN disabled.
Size of prom_init before the patch:
text data bss dec hex filename
12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o
Size of prom_init after the patch:
text data bss dec hex filename
12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o
This increases the size of prom_init a bit, but as prom_init is
in __init section, it is freed after boot anyway.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch makes CONFIG_CMDLINE defined at all time. It avoids
having to enclose related code inside #ifdef CONFIG_CMDLINE
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset()
Those wrappers are doing the verification then call respectively
__memcpy() __memmove() and __memset(). The arches are therefore
expected to rename their optimised functions that way.
For files on which KASAN is inhibited, #defines are used to allow
them to directly call optimised versions of the functions without
going through the KASAN wrappers.
See commit 393f203f5f ("x86_64: kasan: add interceptors for
memset/memmove/memcpy functions") for details.
Other string / mem functions do not (yet) have kasan wrappers,
we therefore have to fallback to the generic versions when
KASAN is active, otherwise KASAN checks will be skipped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fixups to keep selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation of KASAN, move early_init() into a separate
file in order to allow deactivation of KASAN for that function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgd_alloc() and pgd_free() are identical on nohash 32 and 64.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pmd_pgtable() is identical on the 4 subarches, refactor it.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_free() and others are identical on nohash/32 and 64,
so move them into asm/nohash/pgalloc.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use IS_ENABLED(CONFIG_BOOKE) to make single versions of
pmd_populate() and pmd_populate_kernel()
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_cache[] is the same for the 4 subarches, lets make it common.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Functions pte_alloc_one(), pte_alloc_one_kernel(), pte_free(),
pte_free_kernel() are identical for the four subarches.
This patch moves their definition in a common place.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_alloc_one_kernel() and pte_alloc_one() are simple calls to
pte_fragment_alloc(), so they are good candidates for inlining as
already done on PPC64.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the same way as PPC64, implement early allocation functions and
avoid calling pte_alloc_kernel() before slab is available.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
early_alloc_pgtable() is only used during init.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Lets select PPC_MM_SLICES from the subarch config item instead of
doing it via defaults declaration in the PPC_MM_SLICES item itself.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Those files have no real added values, especially the 64 bit
which only includes the common book3e mmu.h which is also
included from 32 bits side.
So lets do the final inclusion directly from nohash/mmu.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_t is now identical for all subarches, move it to the
top level asm/mmu.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Book3E 64 is the only subarch not using pte_fragment. In order
to allow refactorisation, this patch converts it to pte_fragment.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This has never been called (since Kernel has been in git at least),
drop it.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__find_linux_pte() is full of if/else which is hard to
follow allthough the handling is pretty simple.
Previous patches left a { } block. This patch removes it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__find_linux_pte() is full of if/else which is hard to
follow allthough the handling is pretty simple.
Previous patch left { } blocks. This patch removes the first one
by shifting its content to the left.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__find_linux_pte() is full of if/else which is hard to
follow allthough the handling is pretty simple.
This patch flattens the function by getting rid of as much if/else
as possible. In order to ease the review, this is done in three steps.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only 3 subarches support huge pages. So when it is either 2 of them,
it is not the third one.
And mmu_has_feature() is known by all subarches so IS_ENABLED() can
be used instead of #ifdef
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only book3s/64 may select default among several HPAGE_SHIFT at runtime.
8xx always defines 512K pages as default
FSL_BOOK3E always defines 4M pages as default
This patch limits HUGETLB_PAGE_SIZE_VARIABLE to book3s/64
moves the definitions in subarches files.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No need to have this in asm/page.h, move it into asm/hugetlb.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce a subarch specific helper check_and_get_huge_psize()
to check the huge page sizes and cleanup the ifdef mess in
add_huge_page_size()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patchs adds a subarch helper to populate hugepd.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Three subarches support hugepages:
- fsl book3e
- book3s/64
- 8xx
This patch splits asm/hugetlb.h to reduce the #ifdef mess.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
gup_huge_pd() is the only user of gup_hugepte() and it is
located in the same file. This patch moves gup_huge_pd()
after gup_hugepte() and makes gup_hugepte() static.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The only function in hugetlbpage.c which doesn't depend on
CONFIG_HUGETLB_PAGE is gup_hugepte(), and this function is
only called from gup_huge_pd() which depends on
CONFIG_HUGETLB_PAGE so all the content of hugetlbpage.c
depends on CONFIG_HUGETLB_PAGE.
This patch modifies Makefile to only compile hugetlbpage.c
when CONFIG_HUGETLB_PAGE is set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__find_linux_pte() is the only function in hugetlbpage.c
which is compiled in regardless on CONFIG_HUGETLBPAGE
This patch moves it in pgtable.c.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As per Kconfig.cputype, only CONFIG_PPC_FSL_BOOK3E gets to
select SYS_SUPPORTS_HUGETLBFS so simplify accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_PPC_64K_PAGES cannot be selected by nohash/64.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is not used anymore, drop it.
Fixes: b42279f016 ("powerpc/mm/nohash: MM_SLICE is only used by book3s 64")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch defines a subarch specific SLB_ADDR_LIMIT_DEFAULT
to remove the #ifdefs around the setup of mm->context.slb_addr_limit
It also generalises the use of mm_ctx_set_slb_addr_limit() helper.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
get_slice_psize() can be defined regardless of CONFIG_PPC_MM_SLICES
to avoid ifdefs
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 8xx only selects CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE
is set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch replaces a couple of #ifdef CONFIG_PPC_64K_PAGES
by IS_ENABLED(CONFIG_PPC_64K_PAGES) to improve code maintainability.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For PPC32 that's a noop, gcc should be smart enough to ignore it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that slice_mask_for_size() is in mmu.h, the mm_ctx_slice_mask_xxx()
are not needed anymore, so drop them. Note that the 8xx ones where
not used anyway.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move slice_mask_for_size() into subarch mmu.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Retain the BUG_ON()s, rather than converting to VM_BUG_ON()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
slice_mask_for_size() only uses mm->context, so hand directly a
pointer to the context. This will help moving the function in
subarch mmu.h in the next patch by avoiding having to include
the definition of struct mm_struct
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only nohash/32 and book3s/64 support mm slices.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 67fda38f0d ("powerpc/mm: Move slb_addr_linit to
early_init_mmu") moved slb_addr_limit init out of setup_arch().
Commit 701101865f ("powerpc/mm: Reduce memory usage for mm_context_t
for radix") brought it back into setup_arch() by error.
This patch reverts that erroneous regress.
Fixes: 701101865f ("powerpc/mm: Reduce memory usage for mm_context_t for radix")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many files in arch/powerpc/mm are only for nohash. This patch
creates a subdirectory for them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Shorten new filenames]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Several files in arch/powerpc/mm are only for book3S32. This patch
creates a subdirectory for them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Shorten new filenames]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many files in arch/powerpc/mm are only for book3S64. This patch
creates a subdirectory for them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Update the selftest sym links, shorten new filenames, cleanup some
whitespace and formatting in the new files.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch make inclusion of mmu_decl.h independant of the location
of the file including it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
TRANSPARENT_HUGEPAGE is only supported by book3s
VMEMMAP_REGION_ID is never used
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
early_alloc_pgtable() never returns NULL as it panics on failure.
This patch drops the three BUG_ON() which check the non nullity
of early_alloc_pgtable() returned value.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a kernel crash that happens if rt_sigreturn() is called inside
a transactional block.
This crash happens if the kernel hits an in-kernel page fault when
accessing userspace memory, usually through copy_ckvsx_to_user(). A
major page fault calls might_sleep() function, which can cause a task
reschedule. A task reschedule (switch_to()) reclaim and recheckpoint
the TM states, but, in the signal return path, the checkpointed memory
was already reclaimed, thus the exception stack has MSR that points to
MSR[TS]=0.
When the code returns from might_sleep() and a task reschedule
happened, then this task is returned with the memory recheckpointed,
and CPU MSR[TS] = suspended.
This means that there is a side effect at might_sleep() if it is
called with CPU MSR[TS] = 0 and the task has regs->msr[TS] != 0.
This side effect can cause a TM bad thing, since at the exception
entrance, the stack saves MSR[TS]=0, and this is what will be used at
RFID, but, the processor has MSR[TS] = Suspended, and this transition
will be invalid and a TM Bad thing will be raised, causing the
following crash:
Unexpected TM Bad Thing exception at c00000000000e9ec (msr 0x8000000302a03031) tm_scratch=800000010280b033
cpu 0xc: Vector: 700 (Program Check) at [c00000003ff1fd70]
pc: c00000000000e9ec: fast_exception_return+0x100/0x1bc
lr: c000000000032948: handle_rt_signal64+0xb8/0xaf0
sp: c0000004263ebc40
msr: 8000000302a03031
current = 0xc000000415050300
paca = 0xc00000003ffc4080 irqmask: 0x03 irq_happened: 0x01
pid = 25006, comm = sigfuz
Linux version 5.0.0-rc1-00001-g3bd6e94bec12 (breno@debian) (gcc version 8.2.0 (Debian 8.2.0-3)) #899 SMP Mon Jan 7 11:30:07 EST 2019
WARNING: exception is not recoverable, can't continue
enter ? for help
[c0000004263ebc40] c000000000032948 handle_rt_signal64+0xb8/0xaf0 (unreliable)
[c0000004263ebd30] c000000000022780 do_notify_resume+0x2f0/0x430
[c0000004263ebe20] c00000000000e844 ret_from_except_lite+0x70/0x74
--- Exception: c00 (System Call) at 00007fffbaac400c
SP (7fffeca90f40) is in userspace
The solution for this problem is running the sigreturn code with
regs->msr[TS] disabled, thus, avoiding hitting the side effect above.
This does not seem to be a problem since regs->msr will be replaced by
the ucontext value, so, it is being flushed already. In this case, it
is flushed earlier.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the below crash by making sure we touch the subpage
protection related structures only if we know they are allocated on
the platform. With radix translation we don't allocate hash context at
all and trying to access subpage_prot_table results in:
Faulting instruction address: 0xc00000000008bdb4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
....
NIP [c00000000008bdb4] sys_subpage_prot+0x74/0x590
LR [c00000000000b688] system_call+0x5c/0x70
Call Trace:
[c00020002c6b7d30] [c00020002c6b7d90] 0xc00020002c6b7d90 (unreliable)
[c00020002c6b7e20] [c00000000000b688] system_call+0x5c/0x70
Instruction dump:
fb61ffd8 fb81ffe0 fba1ffe8 fbc1fff0 fbe1fff8 f821ff11 e92d1178 f9210068
39200000 e92d0968 ebe90630 e93f03e8 <eb891038> 60000000 3860fffe e9410068
We also move the subpage_prot_table with mmp_sem held to avoid race
between two parallel subpage_prot syscall.
Fixes: 701101865f ("powerpc/mm: Reduce memory usage for mm_context_t for radix")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Print more information about MCE error whether it is an hardware or
software error.
Some of the MCE errors can be easily categorized as hardware or
software errors e.g. UEs are due to hardware error, where as error
triggered due to invalid usage of tlbie is a pure software bug. But
not all the MCE errors can be easily categorize into either software
or hardware. There are errors like multihit errors which are usually
result of a software bug, but in some rare cases a hardware failure
can cause a multihit error. In past, we have seen case where after
replacing faulty chip, multihit errors stopped occurring. Same with
parity errors, which are usually due to faulty hardware but there are
chances where multihit can also cause an parity error. Such errors are
difficult to determine what really caused it. Hence this patch
classifies MCE errors into following four categorize:
1. Hardware error:
UE and Link timeout failure errors.
2. Probable hardware error (some chance of software cause)
SLB/ERAT/TLB Parity errors.
3. Software error
Invalid tlbie form.
4. Probable software error (some chance of hardware cause)
SLB/ERAT/TLB Multihit errors.
Sample output:
MCE: CPU80: machine check (Warning) Guest SLB Multihit DAR: 000001001b6e0320 [Recovered]
MCE: CPU80: PID: 24765 Comm: qemu-system-ppc Guest NIP: [00007fffa309dc60]
MCE: CPU80: Probable Software error (some chance of hardware cause)
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently all machine check errors are printed as severe errors which
isn't correct. Print soft errors as warning instead of severe errors.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When analysing sources of OS jitter, I noticed that doorbells cannot be
traced.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 2bf1071a8d ("powerpc/64s: Remove POWER9 DD1 support") the
function __switch_to remove usage for 'dummy_copy_buffer'. Since it is
not used anywhere else, remove it completely.
This remove the following warning:
arch/powerpc/kernel/process.c:1156:17: error: 'dummy_copy_buffer' defined but not used
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently error return from kobject_init_and_add() is not followed by
a call to kobject_put(). This means there is a memory leak.
Add call to kobject_put() in error path of kobject_init_and_add().
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Towards the goal of removing cc-ldoption, it seems that --hash-style=
was added to binutils 2.17.50.0.2 in 2006. The minimal required
version of binutils for the kernel according to
Documentation/process/changes.rst is 2.20.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the return value type was changed from int to bool, few places
were left unchanged, this fixes them. We did not hit these failures as
the first one is not happening at all and the second one is little
more likely to happen if the user switches a 33..58bit DMA capable
device between the VFIO and vendor drivers and there are not so many
of these.
Fixes: 2d6ad41b2c ("powerpc/powernv: use the generic iommu bypass code")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is an implementation of commits 53a712bae5
("powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle") and
a3f3072db6 ("powerpc/powernv/idle: Restore IAMR after idle") using
the new C-based idle code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Extract from Nick's patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reimplement Book3S idle code in C, moving POWER7/8/9 implementation
speific HV idle code to the powernv platform code.
Book3S assembly stubs are kept in common code and used only to save
the stack frame and non-volatile GPRs before executing architected
idle instructions, and restoring the stack and reloading GPRs then
returning to C after waking from idle.
The complex logic dealing with threads and subcores, locking, SPRs,
HMIs, timebase resync, etc., is all done in C which makes it more
maintainable.
This is not a strict translation to C code, there are some
significant differences:
- Idle wakeup no longer uses the ->cpu_restore call to reinit SPRs,
but saves and restores them itself.
- The optimisation where EC=ESL=0 idle modes did not have to save GPRs
or change MSR is restored, because it's now simple to do. ESL=1
sleeps that do not lose GPRs can use this optimization too.
- KVM secondary entry and cede is now more of a call/return style
rather than branchy. nap_state_lost is not required because KVM
always returns via NVGPR restoring path.
- KVM secondary wakeup from offline sequence is moved entirely into
the offline wakeup, which avoids a hwsync in the normal idle wakeup
path.
Performance measured with context switch ping-pong on different
threads or cores, is possibly improved a small amount, 1-3% depending
on stop state and core vs thread test for shallow states. Deep states
it's in the noise compared with other latencies.
KVM improvements:
- Idle sleepers now always return to caller rather than branch out
to KVM first.
- This allows optimisations like very fast return to caller when no
state has been lost.
- KVM no longer requires nap_state_lost because it controls NVGPR
save/restore itself on the way in and out.
- The heavy idle wakeup KVM request check can be moved out of the
normal host idle code and into the not-performance-critical offline
code.
- KVM nap code now returns from where it is called, which makes the
flow a bit easier to follow.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash the KVM changes in]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to ensure that after a XIVE or XICS-on-XIVE KVM device
is closed, KVM will not try to enable or disable any of the escalation
interrupts for the VCPUs. We don't have to worry about races between
clearing the pointers and use of the pointers by the XIVE context
push/pull code, because the callers hold the vcpu->mutex, which is
also taken by the KVM_RUN code. Therefore the vcpu cannot be entering
or exiting the guest concurrently.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Now that we have the possibility of a XIVE or XICS-on-XIVE device being
released while the VM is still running, we need to be careful about
races and potential use-after-free bugs. Although the kvmppc_xive
struct is not freed, but kept around for re-use, the kvmppc_xive_vcpu
structs are freed, and they are used extensively in both the XIVE native
and XICS-on-XIVE code.
There are various ways in which XIVE code gets invoked:
- VCPU entry and exit, which do push and pull operations on the XIVE hardware
- one_reg get and set functions (vcpu->mutex is held)
- XICS hypercalls (but only inside guest execution, not from
kvmppc_pseries_do_hcall)
- device creation calls (kvm->lock is held)
- device callbacks - get/set attribute, mmap, pagefault, release/destroy
- set_mapped/clr_mapped calls (kvm->lock is held)
- connect_vcpu calls
- debugfs file read callbacks
Inside a device release function, we know that userspace cannot have an
open file descriptor referring to the device, nor can it have any mmapped
regions from the device. Therefore the device callbacks are excluded,
as are the connect_vcpu calls (since they need a fd for the device).
Further, since the caller holds the kvm->lock mutex, no other device
creation calls or set/clr_mapped calls can be executing concurrently.
To exclude VCPU execution and XICS hypercalls, we temporarily set
kvm->arch.mmu_ready to 0. This forces any VCPU task that is trying to
enter the guest to take the kvm->lock mutex, which is held by the caller
of the release function. Then, sending an IPI to all other CPUs forces
any VCPU currently executing in the guest to exit.
Finally, we take the vcpu->mutex for each VCPU around the process of
cleaning up and freeing its XIVE data structures, in order to exclude
any one_reg get/set calls.
To exclude the debugfs read callbacks, we just need to ensure that
debugfs_remove is called before freeing any data structures. Once it
returns we know that no CPU can be executing the callbacks (for our
kvmppc_xive instance).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a P9 sPAPR VM boots, the CAS negotiation process determines which
interrupt mode to use (XICS legacy or XIVE native) and invokes a
machine reset to activate the chosen mode.
We introduce 'release' methods for the XICS-on-XIVE and the XIVE
native KVM devices which are called when the file descriptor of the
device is closed after the TIMA and ESB pages have been unmapped.
They perform the necessary cleanups : clear the vCPU interrupt
presenters that could be attached and then destroy the device. The
'release' methods replace the 'destroy' methods as 'destroy' is not
called anymore once 'release' is. Compatibility with older QEMU is
nevertheless maintained.
This is not considered as a safe operation as the vCPUs are still
running and could be referencing the KVM device through their
presenters. To protect the system from any breakage, the kvmppc_xive
objects representing both KVM devices are now stored in an array under
the VM. Allocation is performed on first usage and memory is freed
only when the VM exits.
[paulus@ozlabs.org - Moved freeing of xive structures to book3s.c,
put it under #ifdef CONFIG_KVM_XICS.]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Full support for the XIVE native exploitation mode is now available,
advertise the capability KVM_CAP_PPC_IRQ_XIVE for guests running on
PowerNV KVM Hypervisors only. Support for nested guests (pseries KVM
Hypervisor) is not yet available. XIVE should also have been activated
which is default setting on POWER9 systems running a recent Linux
kernel.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The KVM XICS-over-XIVE device and the proposed KVM XIVE native device
implement an IRQ space for the guest using the generic IPI interrupts
of the XIVE IC controller. These interrupts are allocated at the OPAL
level and "mapped" into the guest IRQ number space in the range 0-0x1FFF.
Interrupt management is performed in the XIVE way: using loads and
stores on the addresses of the XIVE IPI interrupt ESB pages.
Both KVM devices share the same internal structure caching information
on the interrupts, among which the xive_irq_data struct containing the
addresses of the IPI ESB pages and an extra one in case of pass-through.
The later contains the addresses of the ESB pages of the underlying HW
controller interrupts, PHB4 in all cases for now.
A guest, when running in the XICS legacy interrupt mode, lets the KVM
XICS-over-XIVE device "handle" interrupt management, that is to
perform the loads and stores on the addresses of the ESB pages of the
guest interrupts. However, when running in XIVE native exploitation
mode, the KVM XIVE native device exposes the interrupt ESB pages to
the guest and lets the guest perform directly the loads and stores.
The VMA exposing the ESB pages make use of a custom VM fault handler
which role is to populate the VMA with appropriate pages. When a fault
occurs, the guest IRQ number is deduced from the offset, and the ESB
pages of associated XIVE IPI interrupt are inserted in the VMA (using
the internal structure caching information on the interrupts).
Supporting device passthrough in the guest running in XIVE native
exploitation mode adds some extra refinements because the ESB pages
of a different HW controller (PHB4) need to be exposed to the guest
along with the initial IPI ESB pages of the XIVE IC controller. But
the overall mechanic is the same.
When the device HW irqs are mapped into or unmapped from the guest
IRQ number space, the passthru_irq helpers, kvmppc_xive_set_mapped()
and kvmppc_xive_clr_mapped(), are called to record or clear the
passthrough interrupt information and to perform the switch.
The approach taken by this patch is to clear the ESB pages of the
guest IRQ number being mapped and let the VM fault handler repopulate.
The handler will insert the ESB page corresponding to the HW interrupt
of the device being passed-through or the initial IPI ESB page if the
device is being removed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Each source is associated with an Event State Buffer (ESB) with a
even/odd pair of pages which provides commands to manage the source:
to trigger, to EOI, to turn off the source for instance.
The custom VM fault handler will deduce the guest IRQ number from the
offset of the fault, and the ESB page of the associated XIVE interrupt
will be inserted into the VMA using the internal structure caching
information on the interrupts.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Each thread has an associated Thread Interrupt Management context
composed of a set of registers. These registers let the thread handle
priority management and interrupt acknowledgment. The most important
are :
- Interrupt Pending Buffer (IPB)
- Current Processor Priority (CPPR)
- Notification Source Register (NSR)
They are exposed to software in four different pages each proposing a
view with a different privilege. The first page is for the physical
thread context and the second for the hypervisor. Only the third
(operating system) and the fourth (user level) are exposed the guest.
A custom VM fault handler will populate the VMA with the appropriate
pages, which should only be the OS page for now.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The state of the thread interrupt management registers needs to be
collected for migration. These registers are cached under the
'xive_saved_state.w01' field of the VCPU when the VPCU context is
pulled from the HW thread. An OPAL call retrieves the backup of the
IPB register in the underlying XIVE NVT structure and merges it in the
KVM state.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When migration of a VM is initiated, a first copy of the RAM is
transferred to the destination before the VM is stopped, but there is
no guarantee that the EQ pages in which the event notifications are
queued have not been modified.
To make sure migration will capture a consistent memory state, the
XIVE device should perform a XIVE quiesce sequence to stop the flow of
event notifications and stabilize the EQs. This is the purpose of the
KVM_DEV_XIVE_EQ_SYNC control which will also marks the EQ pages dirty
to force their transfer.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This control will be used by the H_INT_SYNC hcall from QEMU to flush
event notifications on the XIVE IC owning the source.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This control is to be used by the H_INT_RESET hcall from QEMU. Its
purpose is to clear all configuration of the sources and EQs. This is
necessary in case of a kexec (for a kdump kernel for instance) to make
sure that no remaining configuration is left from the previous boot
setup so that the new kernel can start safely from a clean state.
The queue 7 is ignored when the XIVE device is configured to run in
single escalation mode. Prio 7 is used by escalations.
The XIVE VP is kept enabled as the vCPU is still active and connected
to the XIVE device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
These controls will be used by the H_INT_SET_QUEUE_CONFIG and
H_INT_GET_QUEUE_CONFIG hcalls from QEMU to configure the underlying
Event Queue in the XIVE IC. They will also be used to restore the
configuration of the XIVE EQs and to capture the internal run-time
state of the EQs. Both 'get' and 'set' rely on an OPAL call to access
the EQ toggle bit and EQ index which are updated by the XIVE IC when
event notifications are enqueued in the EQ.
The value of the guest physical address of the event queue is saved in
the XIVE internal xive_q structure for later use. That is when
migration needs to mark the EQ pages dirty to capture a consistent
memory state of the VM.
To be noted that H_INT_SET_QUEUE_CONFIG does not require the extra
OPAL call setting the EQ toggle bit and EQ index to configure the EQ,
but restoring the EQ state will.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This control will be used by the H_INT_SET_SOURCE_CONFIG hcall from
QEMU to configure the target of a source and also to restore the
configuration of a source when migrating the VM.
The XIVE source interrupt structure is extended with the value of the
Effective Interrupt Source Number. The EISN is the interrupt number
pushed in the event queue that the guest OS will use to dispatch
events internally. Caching the EISN value in KVM eases the test when
checking if a reconfiguration is indeed needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The XIVE KVM device maintains a list of interrupt sources for the VM
which are allocated in the pool of generic interrupts (IPIs) of the
main XIVE IC controller. These are used for the CPU IPIs as well as
for virtual device interrupts. The IRQ number space is defined by
QEMU.
The XIVE device reuses the source structures of the XICS-on-XIVE
device for the source blocks (2-level tree) and for the source
interrupts. Under XIVE native, the source interrupt caches mostly
configuration information and is less used than under the XICS-on-XIVE
device in which hcalls are still necessary at run-time.
When a source is initialized in KVM, an IPI interrupt source is simply
allocated at the OPAL level and then MASKED. KVM only needs to know
about its type: LSI or MSI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The user interface exposes a new capability KVM_CAP_PPC_IRQ_XIVE to
let QEMU connect the vCPU presenters to the XIVE KVM device if
required. The capability is not advertised for now as the full support
for the XIVE native exploitation mode is not yet available. When this
is case, the capability will be advertised on PowerNV Hypervisors
only. Nested guests (pseries KVM Hypervisor) are not supported.
Internally, the interface to the new KVM device is protected with a
new interrupt mode: KVMPPC_IRQ_XIVE.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This is the basic framework for the new KVM device supporting the XIVE
native exploitation mode. The user interface exposes a new KVM device
to be created by QEMU, only available when running on a L0 hypervisor.
Support for nested guests is not available yet.
The XIVE device reuses the device structure of the XICS-on-XIVE device
as they have a lot in common. That could possibly change in the future
if the need arise.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This merges in the ppc-kvm topic branch from the powerpc tree to get
patches which touch both general powerpc code and KVM code, one of
which is a prerequisite for following patches.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On POWER9 and later processors where the host can schedule vcpus on a
per thread basis, there is a streamlined entry path used when the guest
is radix. This entry path saves/restores the fp and vr state in
kvmhv_p9_guest_entry() by calling store_[fp/vr]_state() and
load_[fp/vr]_state(). This is the same as the old entry path however the
old entry path also saved/restored the VRSAVE register, which isn't done
in the new entry path.
This means that the vrsave register is now volatile across guest exit,
which is an incorrect change in behaviour.
Fix this by saving/restoring the vrsave register in kvmhv_p9_guest_entry().
This restores the old, correct, behaviour.
Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When running on POWER9 with kvm_hv.indep_threads_mode = N and the host
in SMT1 mode, KVM will run guest VCPUs on offline secondary threads.
If those guests are in radix mode, we fail to load the LPID and flush
the TLB if necessary, leading to the guest crashing with an
unsupported MMU fault. This arises from commit 9a4506e11b ("KVM:
PPC: Book3S HV: Make radix handle process scoped LPID flush in C,
with relocation on", 2018-05-17), which didn't consider the case
where indep_threads_mode = N.
For simplicity, this makes the real-mode guest entry path flush the
TLB in the same place for both radix and hash guests, as we did before
9a4506e11b, though the code is now C code rather than assembly code.
We also have the radix TLB flush open-coded rather than calling
radix__local_flush_tlb_lpid_guest(), because the TLB flush can be
called in real mode, and in real mode we don't want to invoke the
tracepoint code.
Fixes: 9a4506e11b ("KVM: PPC: Book3S HV: Make radix handle process scoped LPID flush in C, with relocation on")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This replaces assembler code in book3s_hv_rmhandlers.S that checks
the kvm->arch.need_tlb_flush cpumask and optionally does a TLB flush
with C code in book3s_hv_builtin.c. Note that unlike the radix
version, the hash version doesn't do an explicit ERAT invalidation
because we will invalidate and load up the SLB before entering the
guest, and that will invalidate the ERAT.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The code in book3s_hv_rmhandlers.S that pushes the XIVE virtual CPU
context to the hardware currently assumes it is being called in real
mode, which is usually true. There is however a path by which it can
be executed in virtual mode, in the case where indep_threads_mode = N.
A virtual CPU executing on an offline secondary thread can take a
hypervisor interrupt in virtual mode and return from the
kvmppc_hv_entry() call after the kvm_secondary_got_guest label.
It is possible for it to be given another vcpu to execute before it
gets to execute the stop instruction. In that case it will call
kvmppc_hv_entry() for the second VCPU in virtual mode, and the XIVE
vCPU push code will be executed in virtual mode. The result in that
case will be a host crash due to an unexpected data storage interrupt
caused by executing the stdcix instruction in virtual mode.
This fixes it by adding a code path for virtual mode, which uses the
virtual TIMA pointer and normal load/store instructions.
[paulus@ozlabs.org - wrote patch description]
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This fixes a bug in the XICS emulation on POWER9 machines which is
triggered by the guest doing a H_IPI with priority = 0 (the highest
priority). What happens is that the notification interrupt arrives
at the destination at priority zero. The loop in scan_interrupts()
sees that a priority 0 interrupt is pending, but because xc->mfrr is
zero, we break out of the loop before taking the notification
interrupt out of the queue and EOI-ing it. (This doesn't happen
when xc->mfrr != 0; in that case we process the priority-0 notification
interrupt on the first iteration of the loop, and then break out of
a subsequent iteration of the loop with hirq == XICS_IPI.)
To fix this, we move the prio >= xc->mfrr check down to near the end
of the loop. However, there are then some other things that need to
be adjusted. Since we are potentially handling the notification
interrupt and also delivering an IPI to the guest in the same loop
iteration, we need to update pending and handle any q->pending_count
value before the xc->mfrr check, rather than at the end of the loop.
Also, we need to update the queue pointers when we have processed and
EOI-ed the notification interrupt, since we may not do it later.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
I made the same typo when trying to grep for uses of smp_wmb and figured
I might as well fix it.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We already allocate hardware TCE tables in multiple levels and skip
intermediate levels when we can, now it is a turn of the KVM TCE tables.
Thankfully these are allocated already in 2 levels.
This moves the table's last level allocation from the creating helper to
kvmppc_tce_put() and kvm_spapr_tce_fault(). Since such allocation cannot
be done in real mode, this creates a virtual mode version of
kvmppc_tce_put() which handles allocations.
This adds kvmppc_rm_ioba_validate() to do an additional test if
the consequent kvmppc_tce_put() needs a page which has not been allocated;
if this is the case, we bail out to virtual mode handlers.
The allocations are protected by a new mutex as kvm->lock is not suitable
for the task because the fault handler is called with the mmap_sem held
but kvmhv_setup_mmu() locks kvm->lock and mmap_sem in the reverse order.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The kvmppc_tce_to_ua() helper is called from real and virtual modes
and it works fine as long as CONFIG_DEBUG_LOCKDEP is not enabled.
However if the lockdep debugging is on, the lockdep will most likely break
in kvm_memslots() because of srcu_dereference_check() so we need to use
PPC-own kvm_memslots_raw() which uses realmode safe
rcu_dereference_raw_notrace().
This creates a realmode copy of kvmppc_tce_to_ua() which replaces
kvm_memslots() with kvm_memslots_raw().
Since kvmppc_rm_tce_to_ua() becomes static and can only be used inside
HV KVM, this moves it earlier under CONFIG_KVM_BOOK3S_HV_POSSIBLE.
This moves truly virtual-mode kvmppc_tce_to_ua() to where it belongs and
drops the prmap parameter which was never used in the virtual mode.
Fixes: d3695aa4f4 ("KVM: PPC: Add support for multiple-TCE hcalls", 2016-02-15)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The trace_hardirqs_on() sets current->hardirqs_enabled and from here
the lockdep assumes interrupts are enabled although they are remain
disabled until the context switches to the guest. Consequent
srcu_read_lock() checks the flags in rcu_lock_acquire(), observes
disabled interrupts and prints a warning (see below).
This moves trace_hardirqs_on/off closer to __kvmppc_vcore_entry to
prevent lockdep from being confused.
DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
WARNING: CPU: 16 PID: 8038 at kernel/locking/lockdep.c:4128 check_flags.part.25+0x224/0x280
[...]
NIP [c000000000185b84] check_flags.part.25+0x224/0x280
LR [c000000000185b80] check_flags.part.25+0x220/0x280
Call Trace:
[c000003fec253710] [c000000000185b80] check_flags.part.25+0x220/0x280 (unreliable)
[c000003fec253780] [c000000000187ea4] lock_acquire+0x94/0x260
[c000003fec253840] [c00800001a1e9768] kvmppc_run_core+0xa60/0x1ab0 [kvm_hv]
[c000003fec253a10] [c00800001a1ed944] kvmppc_vcpu_run_hv+0x73c/0xec0 [kvm_hv]
[c000003fec253ae0] [c00800001a1095dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000003fec253b00] [c00800001a1056bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
[c000003fec253b90] [c00800001a0f3618] kvm_vcpu_ioctl+0x460/0x850 [kvm]
[c000003fec253d00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930
[c000003fec253db0] [c00000000041ce04] ksys_ioctl+0xc4/0x110
[c000003fec253e00] [c00000000041ce78] sys_ioctl+0x28/0x80
[c000003fec253e20] [c00000000000b5a4] system_call+0x5c/0x70
Instruction dump:
419e0034 3d220004 39291730 81290000 2f890000 409e0020 3c82ffc6 3c62ffc5
3884be70 386329c0 4bf6ea71 60000000 <0fe00000> 3c62ffc6 3863be90 4801273d
irq event stamp: 1025
hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>] (null)
---[ end trace 31180adcc848993e ]---
possible reason: unannotated irqs-off.
irq event stamp: 1025
hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv]
hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv]
softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00
softirqs last disabled at (0): [<0000000000000000>] (null)
Fixes: 8b24e69fc4 ("KVM: PPC: Book3S HV: Close race with testing for signals on guest entry", 2017-06-26)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Implement a real mode handler for the H_CALL H_PAGE_INIT which can be
used to zero or copy a guest page. The page is defined to be 4k and must
be 4k aligned.
The in-kernel real mode handler halves the time to handle this H_CALL
compared to handling it in userspace for a hash guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Implement a virtual mode handler for the H_CALL H_PAGE_INIT which can be
used to zero or copy a guest page. The page is defined to be 4k and must
be 4k aligned.
The in-kernel handler halves the time to handle this H_CALL compared to
handling it in userspace for a radix guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.
Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When removing memory we need to remove the memory from the node
it was added to instead of looking up the node it should be in
in the device tree.
During testing we have seen scenarios where the affinity for a
LMB changes due to a partition migration or PRRN event. In these
cases the node the LMB exists in may not match the node the device
tree indicates it belongs in. This can lead to a system crash
when trying to DLPAR remove the LMB after a migration or PRRN
event. The current code looks up the node in the device tree to
remove the LMB from, the crash occurs when we try to offline this
node and it does not have any data, i.e. node_data[nid] == NULL.
36:mon> e
cpu 0x36: Vector: 300 (Data Access) at [c0000001828b7810]
pc: c00000000036d08c: try_offline_node+0x2c/0x1b0
lr: c0000000003a14ec: remove_memory+0xbc/0x110
sp: c0000001828b7a90
msr: 800000000280b033
dar: 9a28
dsisr: 40000000
current = 0xc0000006329c4c80
paca = 0xc000000007a55200 softe: 0 irq_happened: 0x01
pid = 76926, comm = kworker/u320:3
36:mon> t
[link register ] c0000000003a14ec remove_memory+0xbc/0x110
[c0000001828b7a90] c00000000006a1cc arch_remove_memory+0x9c/0xd0 (unreliable)
[c0000001828b7ad0] c0000000003a14e0 remove_memory+0xb0/0x110
[c0000001828b7b20] c0000000000c7db4 dlpar_remove_lmb+0x94/0x160
[c0000001828b7b60] c0000000000c8ef8 dlpar_memory+0x7e8/0xd10
[c0000001828b7bf0] c0000000000bf828 handle_dlpar_errorlog+0xf8/0x160
[c0000001828b7c60] c0000000000bf8cc pseries_hp_work_fn+0x3c/0xa0
[c0000001828b7c90] c000000000128cd8 process_one_work+0x298/0x5a0
[c0000001828b7d20] c000000000129068 worker_thread+0x88/0x620
[c0000001828b7dc0] c00000000013223c kthread+0x1ac/0x1c0
[c0000001828b7e30] c00000000000b45c ret_from_kernel_thread+0x5c/0x80
To resolve this we need to track the node a LMB belongs to when
it is added to the system so we can remove it from that node instead
of the node that the device tree indicates it should belong to.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We use some of
the hugetlb inlines (eg. pud_huge()) when operating on the linear mapping and if
they're compiled into empty wrappers we can corrupt memory.
Then two fixes to our VFIO IOMMU code. The first is not a regression but fixes
the locking to avoid a user-triggerable deadlock.
The second does fix a regression since rc1, and depends on the first fix. It
makes it possible to run guests with large amounts of memory again (~256GB).
Thanks to:
Alexey Kardashevskiy.
-----BEGIN PGP SIGNATURE-----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=oJ9o
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We
use some of the hugetlb inlines (eg. pud_huge()) when operating on the
linear mapping and if they're compiled into empty wrappers we can
corrupt memory.
Then two fixes to our VFIO IOMMU code. The first is not a regression
but fixes the locking to avoid a user-triggerable deadlock.
The second does fix a regression since rc1, and depends on the first
fix. It makes it possible to run guests with large amounts of memory
again (~256GB).
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm_iommu: Allow pinning large regions
powerpc/mm_iommu: Fix potential deadlock
powerpc/mm/radix: Make Radix require HUGETLB_PAGE
There are several identical spelling mistakes in warning messages,
fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This comes a bit late, but should be in 5.1 anyway: we want the newly
added system calls to be synchronized across all architectures in
the release.
I hope that in the future, any newly added system calls can be added
to all architectures at the same time, and tested there while they
are in linux-next, avoiding dependencies between the architecture
maintainer trees and the tree that contains the new system call.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Y7Kd
-----END PGP SIGNATURE-----
Merge tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull syscall numbering updates from Arnd Bergmann:
"arch: add pidfd and io_uring syscalls everywhere
This comes a bit late, but should be in 5.1 anyway: we want the newly
added system calls to be synchronized across all architectures in the
release.
I hope that in the future, any newly added system calls can be added
to all architectures at the same time, and tested there while they are
in linux-next, avoiding dependencies between the architecture
maintainer trees and the tree that contains the new system call"
* tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: add pidfd and io_uring syscalls everywhere
These clocks' registers are accessed as big endian, so mark them as
such.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch fix the below section mismatch warnings.
WARNING: vmlinux.o(.text+0x2d1f44): Section mismatch in reference from the function devm_memremap_pages_release() to the function .meminit.text:arch_remove_memory()
WARNING: vmlinux.o(.text+0x2d265c): Section mismatch in reference from the function devm_memremap_pages() to the function .meminit.text:arch_add_memory()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The region actually point to linear map. Rename the #define to
clarify thati.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This helps in debugging. We can look at the dmesg to find out
different kernel mapping details.
On 4K config this shows
kernel vmalloc start = 0xc000100000000000
kernel IO start = 0xc000200000000000
kernel vmemmap start = 0xc000300000000000
On 64K config:
kernel vmalloc start = 0xc008000000000000
kernel IO start = 0xc00a000000000000
kernel vmemmap start = 0xc00c000000000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reduces multiple comparisons in get_region_id to a bit shift operation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All the regions are now mapped with top nibble 0xc. Hence the region id
check is not needed for virt_addr_valid()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds an explicit check in various functions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch maps vmalloc, IO and vmemap regions in the 0xc address range
instead of the current 0xd and 0xf range. This brings the mapping closer
to radix translation mode.
With hash 64K page size each of this region is 512TB whereas with 4K config
we are limited by the max page table range of 64TB and hence there regions
are of 16TB size.
The kernel mapping is now:
On 4K hash
kernel_region_map_size = 16TB
kernel vmalloc start = 0xc000100000000000
kernel IO start = 0xc000200000000000
kernel vmemmap start = 0xc000300000000000
64K hash, 64K radix and 4k radix:
kernel_region_map_size = 512TB
kernel vmalloc start = 0xc008000000000000
kernel IO start = 0xc00a000000000000
kernel vmemmap start = 0xc00c000000000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it easy to update the region mapping in the later patch
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Allocate subpage protect related variables only if we use the feature.
This helps in reducing the hash related mm context struct by around 4K
Before the patch
sizeof(struct hash_mm_context) = 8288
After the patch
sizeof(struct hash_mm_context) = 4160
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, our mm_context_t on book3s64 include all hash specific
context details like slice mask and subpage protection details. We
can skip allocating these with radix translation. This will help us to save
8K per mm_context with radix translation.
With the patch applied we have
sizeof(mm_context_t) = 136
sizeof(struct hash_mm_context) = 8288
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Avoid #ifdef in generic code. Also enables us to do this specific to
MMU translation mode on book3s64
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We want to switch to allocating them runtime only when hash translation is
enabled. Add helpers so that both book3s and nohash can be adapted to
upcoming change easily.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Book3s64 always have PPC_MM_SLICES enabled. So remove the unncessary #ifdef
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current value of MAX_PHYSMEM_BITS cannot work with 32 bit configs.
We used to have MAX_PHYSMEM_BITS not defined without SPARSEMEM and 32
bit configs never expected a value to be set for MAX_PHYSMEM_BITS.
Dependent code such as zsmalloc derived the right values based on other
fields. Instead of finding a value that works with different configs,
use new values only for book3s_64. For 64 bit booke, use the definition
of MAX_PHYSMEM_BITS as per commit a7df61a0e2 ("[PATCH] ppc64: Increase sparsemem defaults")
That change was done in 2005 and hopefully will work with book3e 64.
Fixes: 8bc0868998 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements Kernel Userspace Access Protection for
book3s/32.
Due to limitations of the processor page protection capabilities,
the protection is only against writing. read protection cannot be
achieved using page protection.
The previous patch modifies the page protection so that RW user
pages are RW for Key 0 and RO for Key 1, and it sets Key 0 for
both user and kernel.
This patch changes userspace segment registers are set to Ku 0
and Ks 1. When kernel needs to write to RW pages, the associated
segment register is then changed to Ks 0 in order to allow write
access to the kernel.
In order to avoid having the read all segment registers when
locking/unlocking the access, some data is kept in the thread_struct
and saved on stack on exceptions. The field identifies both the
first unlocked segment and the first segment following the last
unlocked one. When no segment is unlocked, it contains value 0.
As the hash_page() function is not able to easily determine if a
protfault is due to a bad kernel access to userspace, protfaults
need to be handled by handle_page_fault when KUAP is set.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop allow_read/write_to/from_user() as they're now in kup.h,
and adapt allow_user_access() to do nothing when to == NULL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch prepares Kernel Userspace Access Protection for
book3s/32.
Due to limitations of the processor page protection capabilities,
the protection is only against writing. read protection cannot be
achieved using page protection.
book3s/32 provides the following values for PP bits:
PP00 provides RW for Key 0 and NA for Key 1
PP01 provides RW for Key 0 and RO for Key 1
PP10 provides RW for all
PP11 provides RO for all
Today PP10 is used for RW pages and PP11 for RO pages, and user
segment register's Kp and Ks are set to 1. This patch modifies
page protection to use PP01 for RW pages and sets user segment
registers to Kp 0 and Ks 0.
This will allow to setup Userspace write access protection by
settng Ks to 1 in the following patch.
Kernel space segment registers remain unchanged.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To implement Kernel Userspace Execution Prevention, this patch
sets NX bit on all user segments on kernel entry and clears NX bit
on all user segments on kernel exit.
Note that powerpc 601 doesn't have the NX bit, so KUEP will not
work on it. A warning is displayed at startup.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds Kernel Userspace Access Protection on the 8xx.
When a page is RO or RW, it is set RO or RW for Key 0 and NA
for Key 1.
Up to now, the User group is defined with Key 0 for both User and
Supervisor.
By changing the group to Key 0 for User and Key 1 for Supervisor,
this patch prevents the Kernel from being able to access user data.
At exception entry, the kernel saves SPRN_MD_AP in the regs struct,
and reapply the protection. At exception exit it restores SPRN_MD_AP
with the value saved on exception entry.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop allow_read/write_to/from_user() as they're now in kup.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds Kernel Userspace Execution Prevention on the 8xx.
When a page is Executable, it is set Executable for Key 0 and NX
for Key 1.
Up to now, the User group is defined with Key 0 for both User and
Supervisor.
By changing the group to Key 0 for User and Key 1 for Supervisor,
this patch prevents the Kernel from being able to execute user code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the 8xx implements hardware page table walk assistance,
the PGD entries always point to a 4k aligned page, so the 2 upper
bits of the APG are not clobbered anymore and remain 0. Therefore
only APG0 and APG1 are used and need a definition. We set the
other APG to the lowest permission level.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ASM macros for saving, restoring and checking
the KUAP state, and modifies setup_32 to call them on exceptions
from kernel.
The macros are defined as empty by default for when CONFIG_PPC_KUAP
is not selected and/or for platforms which don't handle (yet) KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
syscalls are from user only, so we can account time without checking
whether returning to kernel or user as it will only be user.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When KUAP is enabled we have logic to detect page faults that occur
outside of a valid user access region and are blocked by the AMR.
What we don't have at the moment is logic to detect a fault *within* a
valid user access region, that has been incorrectly blocked by AMR.
This is not meant to ever happen, but it can if we incorrectly
save/restore the AMR, or if the AMR was overwritten for some other
reason.
Currently if that happens we assume it's just a regular fault that
will be corrected by handling the fault normally, so we just return.
But there is nothing the fault handling code can do to fix it, so the
fault just happens again and we spin forever, leading to soft lockups.
So add some logic to detect that case and WARN() if we ever see it.
Arguably it should be a BUG(), but it's more polite to fail the access
and let the kernel continue, rather than taking down the box. There
should be no data integrity issue with failing the fault rather than
BUG'ing, as we're just going to disallow an access that should have
been allowed.
To make the code a little easier to follow, unroll the condition at
the end of bad_kernel_fault() and comment each case, before adding the
call to bad_kuap_fault().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kernel Userspace Access Prevention utilises a feature of the Radix MMU
which disallows read and write access to userspace addresses. By
utilising this, the kernel is prevented from accessing user data from
outside of trusted paths that perform proper safety checks, such as
copy_{to/from}_user() and friends.
Userspace access is disabled from early boot and is only enabled when
performing an operation like copy_{to/from}_user(). The register that
controls this (AMR) does not prevent userspace from accessing itself,
so there is no need to save and restore when entering and exiting
userspace.
When entering the kernel from the kernel we save AMR and if it is not
blocking user access (because eg. we faulted doing a user access) we
reblock user access for the duration of the exception (ie. the page
fault) and then restore the AMR when returning back to the kernel.
This feature can be tested by using the lkdtm driver (CONFIG_LKDTM=y)
and performing the following:
# (echo ACCESS_USERSPACE) > [debugfs]/provoke-crash/DIRECT
If enabled, this should send SIGSEGV to the thread.
We also add paranoid checking of AMR in switch and syscall return
under CONFIG_PPC_KUAP_DEBUG.
Co-authored-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__patch_instruction() is called in early boot, and uses
__put_user_size(), which includes the allow/prevent calls to enforce
KUAP, which could either be called too early, or in the Radix case,
forced to use "early_" versions of functions just to safely handle
this one case.
__put_user_asm() does not do this, and thus is safe to use both in
early boot, and later on since in this case it should only ever be
touching kernel memory.
__patch_instruction() was previously refactored to use
__put_user_size() in order to be able to return -EFAULT, which would
allow the kernel to patch instructions in userspace, which should
never happen. This has the functional change of causing faults on
userspace addresses if KUAP is turned on, which should never happen in
practice.
A future enhancement could be to double check the patch address is
definitely allowed to be tampered with by the kernel.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Execution protection already exists on radix, this just refactors
the radix init to provide the KUEP setup function instead.
Thus, the only functional change is that it can now be disabled.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some platforms (i.e. Radix MMU) need per-CPU initialisation for KUP.
Any platforms that only want to do KUP initialisation once
globally can just check to see if they're running on the boot CPU, or
check if whatever setup they need has already been performed.
Note that this is only for 64-bit.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements a framework for Kernel Userspace Access
Protection.
Then subarches will have the possibility to provide their own
implementation by providing setup_kuap() and
allow/prevent_user_access().
Some platforms will need to know the area accessed and whether it is
accessed from read, write or both. Therefore source, destination and
size and handed over to the two functions.
mpe: Rename to allow/prevent rather than unlock/lock, and add
read/write wrappers. Drop the 32-bit code for now until we have an
implementation for it. Add kuap to pt_regs for 64-bit as well as
32-bit. Don't split strings, use pr_crit_ratelimited().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a skeleton for Kernel Userspace Execution Prevention.
Then subarches implementing it have to define CONFIG_PPC_HAVE_KUEP
and provide setup_kuep() function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Don't split strings, use pr_crit_ratelimited()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a skeleton for Kernel Userspace Protection
functionnalities like Kernel Userspace Access Protection and Kernel
Userspace Execution Prevention
The subsequent implementation of KUAP for radix makes use of a MMU
feature in order to patch out assembly when KUAP is disabled or
unsupported. This won't work unless there's an entry point for KUP
support before the feature magic happens, so for PPC64 setup_kup() is
called early in setup.
On PPC32, feature_fixup() is done too early to allow the same.
Suggested-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to implement KUAP (Kernel Userspace Access Protection) on
Power9 we will be using the AMR, and therefore indirectly the
UAMOR/AMOR.
So save/restore these regs in the idle code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Without restoring the IAMR after idle, execution prevention on POWER9
with Radix MMU is overwritten and the kernel can freely execute
userspace without faulting.
This is necessary when returning from any stop state that modifies
user state, as well as hypervisor state.
To test how this fails without this patch, load the lkdtm driver and
do the following:
$ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT
which won't fault, then boot the kernel with powersave=off, where it
will fault. Applying this patch will fix this.
Fixes: 3b10d0095a ("powerpc/mm/radix: Prevent kernel execution of user space")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a flag so that the DAWR can be enabled on P9 via:
echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
The DAWR was previously force disabled on POWER9 in:
9654153158 powerpc: Disable DAWR in the base POWER9 CPU features
Also see Documentation/powerpc/DAWR-POWER9.txt
This is a dangerous setting, USE AT YOUR OWN RISK.
Some users may not care about a bad user crashing their box
(ie. single user/desktop systems) and really want the DAWR. This
allows them to force enable DAWR.
This flag can also be used to disable DAWR access. Once this is
cleared, all DAWR access should be cleared immediately and your
machine once again safe from crashing.
Userspace may get confused by toggling this. If DAWR is force
enabled/disabled between getting the number of breakpoints (via
PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
inconsistent view of what's available. Similarly for guests.
For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
enabled in the host AND the guest. For this reason, this won't work on
POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.
To double check the DAWR is working, run this kernel selftest:
tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
Any errors/failures/skips mean something is wrong.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Changing the NUMA associations for CPUs and memory at runtime is
basically unsupported by the core mm, scheduler etc. We see all manner
of crashes, warnings and instability when the pseries code tries to do
this. Disable this behavior by default, and document the switch a bit.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When booted with "topology_updates=no", or when "off" is written to
/proc/powerpc/topology_updates, NUMA reassignments are inhibited for
PRRN and VPHN events. However, migration and suspend unconditionally
re-enable reassignments via start_topology_update(). This is
incoherent.
Check the topology_updates_enabled flag in
start/stop_topology_update() so that callers of those APIs need not be
aware of whether reassignments are enabled. This allows the
administrative decision on reassignments to remain in force across
migrations and suspensions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
sparse complains a lot about opal-call.c:
arch/powerpc/platforms/powernv/opal-call.c:128:1: warning: symbol 'opal_invalid_call' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:129:1: warning: symbol 'opal_console_write' was not declared. Should it be static?
arch/powerpc/platforms/powernv/opal-call.c:130:1: warning: symbol 'opal_console_read' was not declared. Should it be static?
Those symbols are forward declared in opal.h, but we can't include that
because the function signatures in opal.h are different. So instead, just
add an extra forward declaration to the OPAL_CALL macro to shut sparse up.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This code was filling a 64K buffer from /dev/urandom in order to
compute a CRC over (on average half of) it by two different methods,
comparing the CRCs, and repeating.
This is not a remotely security-critical application, so use the far
faster and cheaper prandom_u32() generator.
And, while we're at it, only fill as much of the buffer as we plan to use.
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain() will not be affected when it is released.
Detected by coccinelle.
Fixes: a8db8cf0d8 ("irq_domain: Replace irq_alloc_host() with revmap-specific initializers")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support to hwpoison the pages upon hitting machine check
exception.
This patch queues the address where UE is hit to percpu array
and schedules work to plumb it into memory poison infrastructure.
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
[mpe: Combine #ifdefs, drop PPC_BIT8(), and empty inline stub]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add an of_node_put() when a tested device node is not available.
Fixes: c026c98739 ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The commit 4c5d87db49 ("powerpc/pseries: PAPR persistent memory
support") set a local variable "count" in dlpar_hp_pmem() but never
use it.
arch/powerpc/platforms/pseries/pmem.c: In function 'dlpar_hp_pmem':
arch/powerpc/platforms/pseries/pmem.c:109:6: warning: variable 'count' set but not used
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The commit b7d6bf4fdd ("powerpc/pseries/pci: Remove obsolete SW
invalidate") left 2 variables unused.
arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces' set but not used
__be64 *tcep, *tces;
^~~~
arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces' set but not used
__be64 *tcep, *tces;
^~~~
Also, the commit 68c0449ea1 ("powerpc/pseries/iommu: Use memory@
nodes in max RAM address calculation") set "ranges" in
ddw_memory_hotplug_max() but never use it.
arch/powerpc/platforms/pseries/iommu.c: In function 'ddw_memory_hotplug_max':
arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges' set but not used
int ranges, n_mem_addr_cells, n_mem_size_cells, len;
^~~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte_unmap() compiles away on some powerpc platforms, so silence the
warnings below by making it a static inline function.
mm/memory.c: In function 'copy_pte_range':
mm/memory.c:820:24: warning: variable 'orig_dst_pte' set but not used
mm/memory.c:820:9: warning: variable 'orig_src_pte' set but not used
mm/madvise.c: In function 'madvise_free_pte_range':
mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
mm/swap_state.c: In function 'swap_ra_info':
mm/swap_state.c:634:15: warning: variable 'orig_pte' set but not used
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
resize_hpt_for_hotplug() reports a warning when it cannot
resize the hash page table ("Unable to resize hash page
table to target order") but in some cases it's not a problem
and can make user thinks something has not worked properly.
This patch moves the warning to arch_remove_memory() to
only report the problem when it is needed.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recent versions of QEMU provide a XHCI device by default these
days instead of an old-fashioned OHCI device:
https://git.qemu.org/?p=qemu.git;a=commitdiff;h=57040d451315320b7d27
So to get the keyboard working in the graphical console there again,
we should now include XHCI support in the kernel by default, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a follow up to the patch that fixed misleading print for TLB
mutlihit due to wrongly populated mc_err_types[] array. Convert all the
static array initialization to '[x] = val' style for better
readability of array indexing and avoid any further confusion.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M
boundary. This is necessary so that it can be repurposed later with
different permissions. However, in kernels with text larger than 16M,
this pushes early_setup past 32M, incapable of being reached by the
branch instruction.
Fix this by setting the CTR and branching there instead.
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Fix it to work on BE by using DOTSYM()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Silence the following warnings triggered using W=1:
arch/powerpc/platforms/embedded6xx/holly.c:236:6: error: no previous prototype for 'holly_power_off'
arch/powerpc/platforms/embedded6xx/holly.c:243:6: error: no previous prototype for 'holly_halt'
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit cb9e4d10c4 ("[POWERPC] Add support for 750CL Holly board")
new functions were added. Since most of these functions can be made
static, make it so.
Both holly_power_off and holly_halt functions were not changed since
they are unused, making them static would have triggered the following
warning (treated as error):
arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used
Silence the following warnings triggered using W=1:
arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device'
arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo'
arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart'
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations. However, the vdso_install target still
builds and installs it. Add the same config condition as is normally
used for the build.
Fixes: e0d0059169 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add comments describing the size in bytes of the various levels of the
page table tree, and the size of the virtual address space mapped by
each level, to make it clear what the sizes are without having to also
look up other definitions.
The code that calculates the sizes actually uses sizeof(pgd_t) etc.,
so in theory these comments could skew vs the code, but the size of
pgd_t etc. is unlikely to change very often.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In arch/powerpc/mm/highmem.c, BUG_ON() is called only when
CONFIG_DEBUG_HIGHMEM is selected, this means the BUG_ON() is not vital
and can be replaced by a a WARN_ON().
At the same time, use IS_ENABLED() instead of #ifdef to clean a bit.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Our logic for choosing defconfig doesn't work well in some situations.
For example if you're on a ppc64le machine but you specify a non-empty
CROSS_COMPILE, in order to use a non-default toolchain, then defconfig
will give you ppc64_defconfig (big endian):
$ make CROSS_COMPILE=~/toolchains/gcc-8/bin/powerpc-linux- defconfig
*** Default configuration is based on 'ppc64_defconfig'
This is because we assume that CROSS_COMPILE being set means we
can't be on a ppc machine and rather than checking we just default to
ppc64_defconfig.
We should just ignore CROSS_COMPILE, instead check the machine with
uname and if it's one of ppc, ppc64 or ppc64le then use that
defconfig. If it's none of those then we fall back to ppc64_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a generic 32-bit defconfig called ppc_defconfig. This means we'll
have a defconfig matching "uname -m" for all cases.
This config is mostly intended for build testing but if someone wants
to tweak it to get it booting on something that would be fine too.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
- Fix host hang in the HTM assist code for POWER9
- Take srcu read lock around memslot lookup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcpup1AAoJEJ2a6ncsY3Gf9cUIAOdI0vtysd+jq2De+cxUe/8i
qUm7ybYQQQQ+aOwapnw+BIvy3JbE2KFZ2AZQGldCBHYK/m1KrX7Gdt21kAcSouHL
74xTCqOooG1XCJlek2wj2JCKkWbrm9K1i6WfYKNN4lnzgc4qaJxPQL0ikiZPfCkR
7R+ulWmFDZ6ea5gjzGP93zzbq8RKaUnpwGcWVMvIOX2xwonAmZG1fxAu3d5NwUoy
kXOXGdvmExsUsGWnwxJemqCdVj48pX34d+/263Y561/Bj7LotErdZQC+cTn/R8lL
TSfmKfulMb1zAJCqcuQy4x6rY0q579yPbTF/PKSl+hOLG1t9y86fERsAVxAPiTo=
=NzJU
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM/PPC fixes for 5.1
- Fix host hang in the HTM assist code for POWER9
- Take srcu read lock around memslot lookup
Replace all calls to in_interrupt() in the PowerPC crypto code with
!crypto_simd_usable(). This causes the crypto self-tests to test the
no-SIMD code paths when CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
The p8_ghash algorithm is currently failing and needs to be fixed, as it
produces the wrong digest when no-SIMD updates are mixed with SIMD ones.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The software Hamming ECC correction implementation is referred as
MTD_NAND_ECC which is too generic. Rename it
MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an
SMC quirk in the Hamming implementation as
MTD_NAND_ECC_SW_HAMMING_SMC.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When called with vmas_arg==NULL, get_user_pages_longterm() allocates
an array of nr_pages*8 which can easily get greater that the max order,
for example, registering memory for a 256GB guest does this and fails
in __alloc_pages_nodemask().
This adds a loop over chunks of entries to fit the max order limit.
Fixes: 678e174c4c ("powerpc/mm/iommu: allow migration of cma allocated pages during mm_iommu_do_alloc", 2019-03-05)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently mm_iommu_do_alloc() is called in 2 cases:
- VFIO_IOMMU_SPAPR_REGISTER_MEMORY ioctl() for normal memory:
this locks &mem_list_mutex and then locks mm::mmap_sem
several times when adjusting locked_vm or pinning pages;
- vfio_pci_nvgpu_regops::mmap() for GPU memory:
this is called with mm::mmap_sem held already and it locks
&mem_list_mutex.
So one can craft a userspace program to do special ioctl and mmap in
2 threads concurrently and cause a deadlock which lockdep warns about
(below).
We did not hit this yet because QEMU constructs the machine in a single
thread.
This moves the overlap check next to where the new entry is added and
reduces the amount of time spent with &mem_list_mutex held.
This moves locked_vm adjustment from under &mem_list_mutex.
This relies on mm_iommu_adjust_locked_vm() doing nothing when entries==0.
This is one of the lockdep warnings:
======================================================
WARNING: possible circular locking dependency detected
5.1.0-rc2-le_nv2_aikATfstn1-p1 #363 Not tainted
------------------------------------------------------
qemu-system-ppc/8038 is trying to acquire lock:
000000002ec6c453 (mem_list_mutex){+.+.}, at: mm_iommu_do_alloc+0x70/0x490
but task is already holding lock:
00000000fd7da97f (&mm->mmap_sem){++++}, at: vm_mmap_pgoff+0xf0/0x160
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
lock_acquire+0xf8/0x260
down_write+0x44/0xa0
mm_iommu_adjust_locked_vm.part.1+0x4c/0x190
mm_iommu_do_alloc+0x310/0x490
tce_iommu_ioctl.part.9+0xb84/0x1150 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x94/0x430 [vfio]
do_vfs_ioctl+0xe4/0x930
ksys_ioctl+0xc4/0x110
sys_ioctl+0x28/0x80
system_call+0x5c/0x70
-> #0 (mem_list_mutex){+.+.}:
__lock_acquire+0x1484/0x1900
lock_acquire+0xf8/0x260
__mutex_lock+0x88/0xa70
mm_iommu_do_alloc+0x70/0x490
vfio_pci_nvgpu_mmap+0xc0/0x130 [vfio_pci]
vfio_pci_mmap+0x198/0x2a0 [vfio_pci]
vfio_device_fops_mmap+0x44/0x70 [vfio]
mmap_region+0x5d4/0x770
do_mmap+0x42c/0x650
vm_mmap_pgoff+0x124/0x160
ksys_mmap_pgoff+0xdc/0x2f0
sys_mmap+0x40/0x80
system_call+0x5c/0x70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(mem_list_mutex);
lock(&mm->mmap_sem);
lock(mem_list_mutex);
*** DEADLOCK ***
1 lock held by qemu-system-ppc/8038:
#0: 00000000fd7da97f (&mm->mmap_sem){++++}, at: vm_mmap_pgoff+0xf0/0x160
Fixes: c10c21efa4 ("powerpc/vfio/iommu/kvm: Do not pin device memory", 2018-12-19)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joel reported weird crashes using skiroot_defconfig, in his case we
jumped into an NX page:
kernel tried to execute exec-protected page (c000000002bff4f0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc000000002bff4f0
Looking at the disassembly, we had simply branched to that address:
c000000000c001bc 49fff335 bl c000000002bff4f0
But that didn't match the original kernel image:
c000000000c001bc 4bfff335 bl c000000000bff4f0 <kobject_get+0x8>
When STRICT_KERNEL_RWX is enabled, and we're using the radix MMU, we
call radix__change_memory_range() late in boot to change page
protections. We do that both to mark rodata read only and also to mark
init text no-execute. That involves walking the kernel page tables,
and clearing _PAGE_WRITE or _PAGE_EXEC respectively.
With radix we may use hugepages for the linear mapping, so the code in
radix__change_memory_range() uses eg. pmd_huge() to test if it has
found a huge mapping, and if so it stops the page table walk and
changes the PMD permissions.
However if the kernel is built without HUGETLBFS support, pmd_huge()
is just a #define that always returns 0. That causes the code in
radix__change_memory_range() to incorrectly interpret the PMD value as
a pointer to a PTE page rather than as a PTE at the PMD level.
We can see this using `dv` in xmon which also uses pmd_huge():
0:mon> dv c000000000000000
pgd @ 0xc000000001740000
pgdp @ 0xc000000001740000 = 0x80000000ffffb009
pudp @ 0xc0000000ffffb000 = 0x80000000ffffa009
pmdp @ 0xc0000000ffffa000 = 0xc00000000000018f <- this is a PTE
ptep @ 0xc000000000000100 = 0xa64bb17da64ab07d <- kernel text
The end result is we treat the value at 0xc000000000000100 as a PTE
and clear _PAGE_WRITE or _PAGE_EXEC, potentially corrupting the code
at that address.
In Joel's specific case we cleared the sign bit in the offset of the
branch, causing a backward branch to turn into a forward branch which
caused us to branch into a non-executable page. However the exact
nature of the crash depends on kernel version, compiler version, and
other factors.
We need to fix radix__change_memory_range() to not use accessors that
depend on HUGETLBFS, but we also have radix memory hotplug code that
uses pmd_huge() etc that will also need fixing. So for now just
disallow the broken combination of Radix with HUGETLBFS disabled.
The only defconfig we have that is affected is skiroot_defconfig, so
turn on HUGETLBFS there so that it still gets Radix.
Fixes: 566ca99af0 ("powerpc/mm/radix: Add dummy radix_enabled()")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All architectures except MIPS were defining it in the same way,
and memory slots are handled entirely by common code so there
is no point in keeping the definition per-architecture.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the io_uring and pidfd_send_signal system calls to all architectures.
These system calls are designed to handle both native and compat tasks,
so all entries are the same across architectures, only arm-compat and
the generic tale still use an old format.
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> (s390)
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A minor build fix for 64-bit FLATMEM configs.
A fix for a boot failure on 32-bit powermacs.
My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on 64-bit
kernels, ie. compat mode, which is only used on big endian.
The rewrite of the SLB code we merged in 4.20 missed the fact that the 0x380
exception is also used with the Radix MMU to report out of range accesses. This
could lead to an oops if userspace tried to read from addresses outside the user
or kernel range.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcsVzhAAoJEFHr6jzI4aWAJuAP/2oLukNIIiF2UW/18xIXfvxR
ZA9JljVqcKUHEUR4W+Y673xL4ZKtGGF79P+bzSvh8fUTMJ9cIN9mLO7eGGoDNqTn
XhZX/jxJOh34tbHPYYbi9kYqWpZQKN4WuCjMQSPBCHOHMdx/0yn0wKgriOW1cuzG
AQqDRHcRX4h1QT9o/hnsCAsdcnLEntdBBCTTHL1dZ8BucuUopjL+7cV0wf4qFIui
e9SXOEl7yV03JGurmWcipE4mj9SrUioZJyHg6rJs70tlCUHFM24LQEFNIM4WczuF
GoPfzXi5nNPrOzC3aF/v77hT5t4zD2sPRV2DuKABGsS+gfPoK8sIZC3mo7Vk5y+j
gsbmkQSZt8/wVhRuAA0m0N6Aqg1J8NjhxoDfyM8kj0FzPe75D662VIgGSx15oMkl
3olt/9uDyPetxuZ7tmmnFC8wkcmyaGpVurVz9xnqpt6c2r0KI+16R6Mk4OiT/e2p
KNVBFkqRTp23ETpI8J9HUk9OtFIHqE9Zwzk2YOrX5yuLHByEwMq1T4qn2RuQsJqx
RWPJagSalGLmM6dqDGe08gQl9rovkYKleGxNIAJuJB9rIxZQke86d2+S0eSUQbAW
WWhP8SU0LJ5gmhEeZi5MntcuG+gcENwkz2UBK5nVDBVLFxGuBTPQATavW+w1bSi+
SSEMXx8dNAOvsrqrZ97I
=pfZc
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor build fix for 64-bit FLATMEM configs.
A fix for a boot failure on 32-bit powermacs.
My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on
64-bit kernels, ie. compat mode, which is only used on big endian.
The rewrite of the SLB code we merged in 4.20 missed the fact that the
0x380 exception is also used with the Radix MMU to report out of range
accesses. This could lead to an oops if userspace tried to read from
addresses outside the user or kernel range.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas
Piggin"
* tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs
powerpc/64s/radix: Fix radix segment exception handling
powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64
powerpc/32: Fix early boot failure with RTAS built-in
The support for XIVE native exploitation mode in Linux/KVM needs a
couple more OPAL calls to get and set the state of the XIVE internal
structures being used by a sPAPR guest.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent commit 8bc0868998 ("powerpc/mm: Only define
MAX_PHYSMEM_BITS in SPARSEMEM configurations") removed our definition
of MAX_PHYSMEM_BITS when SPARSEMEM is disabled.
This inadvertently broke some 64-bit FLATMEM using configs with eg:
arch/powerpc/include/asm/book3s/64/mmu-hash.h:584:6: error: "MAX_PHYSMEM_BITS" is not defined, evaluates to 0
#if (MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT)
^~~~~~~~~~~~~~~~
Fix it by making sure we define MAX_PHYSMEM_BITS for all 64-bit
configs regardless of SPARSEMEM.
Fixes: 8bc0868998 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C")
broke the radix-mode segment exception handler. In radix mode, this is
exception is not an SLB miss, rather it signals that the EA is outside
the range translated by any page table.
The commit lost the radix feature alternate code patch, which can
cause faults to some EAs to kernel BUG at arch/powerpc/mm/slb.c:639!
The original radix code would send faults to slb_miss_large_addr,
which would end up faulting due to slb_addr_limit being 0. This patch
sends radix directly to do_bad_slb_fault, which is a bit clearer.
Fixes: 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that no driver code is using mmiowb() directly, remove the dummy
definitions remaining in architectures that don't make use of
asm-generic/io.h, as well as the definition in asm-generic/io.h itself.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In a bid to kill off explicit mmiowb() usage in driver code, hook up
the asm-generic mmiowb() tracking code but provide a definition of
arch_mmiowb_state() so that the tracking data can remain in the paca
as it does at present
This replaces the existing (flawed) implementation.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Hook up asm-generic/mmiowb.h to Kbuild for all architectures so that we
can subsequently include asm/mmiowb.h from core code.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit b5b4453e79 ("powerpc/vdso64: Fix CLOCK_MONOTONIC
inconsistencies across Y2038") changed the type of wtom_clock_sec
to s64 on PPC64. Therefore, VDSO32 needs to read it with a 4 bytes
shift in order to retrieve the lower part of it.
Fixes: b5b4453e79 ("powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge misc fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel/sysctl.c: fix out-of-bounds access when setting file-max
mm/util.c: fix strndup_user() comment
sh: fix multiple function definition build errors
MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
mm: writeback: use exact memcg dirty counts
psi: clarify the units used in pressure files
mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
hugetlbfs: fix memory leak for resv_map
mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
lib/lzo: fix bugs for very short or empty input
include/linux/bitrev.h: fix constant bitrev
kmemleak: powerpc: skip scanning holes in the .bss section
lib/string.c: implement a basic bcmp
Commit 2d4f567103 ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.
kernel_init
kvm_guest_init
kvm_free_tmp
free_reserved_area
free_unref_page
free_unref_page_prepare
With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.
This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.
Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe Leroy