Commit graph

686 commits

Author SHA1 Message Date
Linus Torvalds
3a99c63190 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...
2010-10-25 07:59:01 -07:00
Jiri Kosina
d8692ac012 HID: fix mismerge in hid-lg
Fix wrong merge in hid-lg -- report fixup functions now get
pointer to rdesc.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-23 22:59:33 +02:00
Jiri Kosina
f1275410a1 Merge branch 'waltop' into for-linus 2010-10-23 22:54:53 +02:00
Jiri Kosina
8b66a16f25 Merge branch 'uc-logic' into for-linus
Conflicts:
	drivers/hid/hid-ids.h
	drivers/hid/hid-lg.c
	drivers/hid/usbhid/hid-quirks.c
2010-10-23 22:49:32 +02:00
Jiri Kosina
bbd128b5ac Merge branches '3m', 'egalax', 'logitech', 'magicmouse', 'ntrig' and 'roccat' into for-linus 2010-10-23 22:47:38 +02:00
Jiri Kosina
c3d9d74336 Merge branches 'upstream' and 'upstream-fixes' into for-linus 2010-10-23 22:44:36 +02:00
Linus Torvalds
5cc1035062 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.
2010-10-22 20:30:48 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Tomoki Sekiyama
6bc235a2e2 USB: add driver for Meywa-Denki & Kayac YUREX
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device.
See http://bbu.kayac.com/en/about/ for further information.
This driver support read/write the leg-shakes counter in the device
via a device file /dev/yurex[0-9]*.

[minor coding style cleanups fixed by gregkh]

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:51 -07:00
Jiri Slaby
cb174681a9 HID: hidraw: fix window in hidraw_release
There is a window between hidraw_table check and its dereference.
In that window, the device may be unplugged and removed form the
system and we will then dereference NULL.

Lock that place properly so that either we get NULL and jump out or we
can work with real pointer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:54:04 +02:00
Antonio Ospite
569b10a506 HID: hid-sony: override usbhid_output_raw_report for Sixaxis
Override usbhid_output_raw_report in order to force output reports (sent
via hidraw_write, for instance) on the control endpoint.

The Sony Sixaxis (PS3 Controller) accepts output reports only on the
control endpoint, it silently discards them when they arrive over the
interrupt endpoint where usbhid would normally deliver them.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:50:24 +02:00
Nikolai Kondrashov
4ea6e4ffb4 HID: add absolute axis resolution calculation
Add absolute axis resolution calculation to the core HID layer, according to HID
specification v1.11 6.2.2.7 Global Items. Only exponent 1 length units for
X/Y/Z/RX/RY/RZ axis are supported for now.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15 16:40:29 +02:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
François Jaouen
272036edb7 HID: Add Cando touch screen 15.6-inch product id
This add the product id of the touch screen found on ACER Aspire 5738PZ.  Works
with hid-cando driver.

Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-13 10:47:32 +02:00
Pierre BAILLY
e1f092102f HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/

Signed-off-by: Pierre BAILLY <pierre@substantiel.fr>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-12 11:39:57 +02:00
Antonio Ospite
e42dee9a99 HID: hidraw, fix a NULL pointer dereference in hidraw_write
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid]
[...]

This is reproducible by disconnecting the device while userspace writes
to dev node in a loop and doesn't check return values in order to exit
the loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:34 +02:00
Antonio Ospite
d20d5ffab9 HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid]
[...]

This is reproducible by disconnecting the device while userspace does
ioctl in a loop and doesn't check return values in order to exit the
loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:31 +02:00
Hendrik Iben
2c6118e430 HID: force feedback support for Logitech RumblePad gamepad
This patch adds force feedback support for Logitech WingMan RumblePad
gamepads by extending the Logitech Rumblepad 2 force feedback code.

Signed-off-by: Hendrik Iben <Hendrik_Iben@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-04 15:39:53 +02:00
Pascal Auriel - Stantum
b6dc79929f HID: support STmicroelectronics and Sitronix with hid-stantuml driver
New VendorsIds/ProductIds using hid-stantum driver.

Signed-off-by: Stantum <software@stantum.com>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 16:01:34 +02:00
Henrik Rydberg
921990b704 HID: magicmouse: Adjust major / minor axes to scale
By visual inspection, the reported touch_major and touch_minor axes
are roughly a factor of four too small. The factor is approximate,
since the protocol is not known and the HID report encodes touch size
with fewer bits than positions. This patch scales the reported values
by a factor of four.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:42:47 +02:00
Philipp Merkel
f51661105c HID: Fix for problems with eGalax/DWAV multi-touch-screen
This patch fixes three problems with the eGalax/DWAV multi-touch
screen found in the Eee PC T101MT:

1) While there is a dedicated multitouch driver for the screen
   (hid-egalax.c), the MULTI_INPUT quirk is also applied, preventing
   the hid-egalax driver from working. This patch removes the quirk
   so the hid-egalax driver can handle the device correctly.
2) The x and y coordinates sent by the screen in multi-touch mode are
   shifted by three bits from the events sent in single-touch mode, thus
   the coordinates are out of range, leading to the pointer being stuck
   in the bottom-right corner if no additional calibration is applied
   (e.g. in the X evdev driver). This patch shifts the coordinates back.
   This does not decrease accuracy as the last three bits of the "wrong"
   coordinates are always 0.
3) Only multi-touch pressure events are sent, single touch emulation is
   missing pressure information. This patch adds single-touch
   ABS_PRESSURE events.

Signed-off-by: Philipp Merkel <mail@philmerk.de>
Acked-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:39:51 +02:00
Nikolai Kondrashov
00e7f9649b HID: waltop: add support for Waltop Slim Tablet 12.1 inch
Add support for Waltop Slim Tablet 12.1 inch by fixing its report descriptor.
This mainly fixes button reporting.

This tablet is also sold as Genius G-Pen F610.
Other possible names of this tablet: VisTablet Original 12", Adesso CyberTablet
Z12, Adesso CT-Z12A, PenPower Tooya Pro, Aiptek Slim 12.1 Inch

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:34:05 +02:00
Rok Mandeljc
8038298fde HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick
This patch adds the NOGET quirk for AXIS 295 Video Surveillance Joystick
(despite AXIS brand the vendor is actually CH Products). Without the quirk, the
joystick is detected but does not generate any events.

Signed-off-by: Rok Mandeljc <rok.mandeljc@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:27:55 +02:00
Alan Stern
50bb6d8492 HID: usbhid: remove unused hiddev_driver
Now that hiddev_driver isn't being used for anything, there's no
reason to keep it around.  This patch (as1419) gets rid of it
entirely.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24 14:03:44 +02:00
Jiri Kosina
73e6d6c646 Merge branch 'master' into upstream 2010-09-24 14:03:37 +02:00
Michael Poole
64eb105d7f HID: magicmouse: Use hid-input parsing rather than bypassing it
Let the HID core handle input device setup and HID-compliant reports.
This driver then only has to worry about the non-standard reports.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24 13:59:13 +02:00
Alan Ott
12e5272585 HID: trivial formatting fix
Added blank line after declarations.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:33:20 +02:00
Simon Wood
32c88cbc30 HID: Add support for Logitech Speed Force Wireless gaming wheel
The following patch adds support for the Logitech Speed Force Wireless gaming
wheel. Originally designed for the WII console. Details on the protocol:

http://wiibrew.org/wiki/Logitech_USB_steering_wheel

This patch relies on previous patch:
"Don't Send Feature Reports on Interrupt Endpoint"

Logitech as produce a very similar wheel for the PS2/PS3, it is expected that
this patch could also support the PS2/PS3 wheel if the USB ID's are added and
(if required) the HID descriptor is modified.

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:25:39 +02:00
Alan Ott
fe2c91ee24 HID: don't Send Feature Reports on Interrupt Endpoint
Feature reports should only be sent on the control endpoint.

The USB HID standard is unclear and confusing on this issue. It seems to
suggest that Feature reports can be sent on a HID device's Interrupt OUT
endpoint.  This cannot be the case because the report type is not encoded in
transfers sent out the Interrput OUT endpoint.  If Feature reports were sent on
the Interrupt OUT endpint, they would be indistinguishable from Output reports
in the case where Report IDs were not used.

Further, Windows and Mac OS X do not send Feature reports out the interrupt OUT
Endpoint.  They will only go out the Control Endpoint.

In addition, many devices simply do not hande Feature reports sent out the
Interrupt OUT endpoint.

Reported-by: simon@mungewell.org
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:19:42 +02:00
Henrik Rydberg
48216fbdad HID: 3m: Adjust major / minor axes to scale
By visual inspection, the reported touch_major and touch_minor axes
are a factor of two too large. Presumably the device actually reports
the width_major and width_minor, which are generally about a factor of
two larger than the touches themselves.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 11:29:07 +02:00
Henrik Rydberg
1d958c83c8 HID: 3m: Correct touchscreen emulation
The current code sometimes misses to report the last BTN_TOUCH event
when multiple fingers are lifted simultaneously.  With the
introduction of MT slots, the tracking id is available to determine
the oldest active contact. Use this information to simplify and
correct the touchscreen emulation logic.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 23:22:39 +02:00
Henrik Rydberg
1f01a1fe16 HID: 3m: Convert to MT slots
The Microtouch controller is capable of doing finger tracking on
up to 60 fingers. To reduce bandwidth and cpu usage, convert the
driver to use the MT slots protocol. On Stephane's suggestion, also
insert the additional copyright lines.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 23:22:34 +02:00
Henrik Rydberg
46c4ba012c HID: 3m: Output proper orientation range
The range of orientation values for height/width devices should
be [0, 1], but is currently set to [1, 1]. Having min == max also
breaks uinput device setup. Fixed with this patch.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:16:09 +02:00
Henrik Rydberg
41035901df HID: 3m: Adjust to sequential MT HID protocol
The multitouch extensions to the HID protocol allows for contact
data to be sent over several reports, which is also the case for
the 3M M2256PW touchscreen. This patch modifies the logic to only
synchronize the input layer when all contacts have been received.
Consequentially, the full 60-finger capacity of the device is enabled.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:11:44 +02:00
Henrik Rydberg
24750f3e46 HID: Add a hid quirk for input sync override
As of lately, HID devices which send per-frame data split over several
HID reports have started to emerge. This patch adds a quirk which
allows the HID driver to take over the input layer synchronization,
and hence the control of the frame boundary.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:11:44 +02:00
Lech Perczak
b7e1b2039d HID: fix A4Tech RP-649 horizontal scrollwheel
Enable fix for their horizontal scroll wheel behaviour, associate
it with B8 hack.

Signed-off-by: Lech Perczak <lech.perczak@multivision.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-17 20:42:42 +02:00
Dmitry Torokhov
f5854fad39 Input: hid-input - allow mapping unknown usages
Currently HID layer only allows to remap keycodes for known usages,
and responds with -EINVAL when user tries to map new usage code.
This precludes us form relying on udev/keymap for establishing correct
mappings and forces us to write dummy HID drivers responsible only for
setting up keymaps.

Let's allow remapping not only usages that have been set up as keys
(usage->type == EV_KEY) but also yet-unmapped usages (usage->type == 0).

Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-15 23:11:29 -07:00
Guillaume Chazarain
8fe294caf8 HID: fix hiddev's use of usb_find_interface
My macbook infrared remote control was broken by commit
bd25f4dd69 ("HID: hiddev: use
usb_find_interface, get rid of BKL").

This device appears in dmesg as:
apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device
[Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0

It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0.

AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver)
does not find anything.

The device is associated with the usbhid driver, so let's do
usb_find_interface(&hid_driver) instead.

$ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver
lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid

Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-14 10:58:42 +02:00
Dmitry Torokhov
a0bf0ea809 Input: hid-input - switch to using new keycode interface
Switch HID code to use new style of getkeycode and setkeycode
methods to allow retrieving and setting keycodes not only by
their scancodes but also by index.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-09 22:02:11 -07:00
Jiri Kosina
eaca138620 HID: fixup blacklist entry for Asus T91MT
The device is handled by hid-mosart driver, and therefore should
be present in hid_blacklist[], not hid_ignore_list[].

Cc: Stephane Chatty <chatty@lii-enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 14:31:47 +02:00
Roland Baum
cec15a0ece HID: add device ID for new Asus Multitouch Controller
The following patch instructs usbhid/hid-mosart to handle a new multitouch
controller, built-in by some Asus EeePC T101MT models.

Signed-off-by: Roland Baum <rba@tr33.de>
Tested-by: Roland Baum <rba@tr33.de>
Acked-by: Stéphane Chatty <chatty@enac.fr>
CC: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 14:30:35 +02:00
Chase Douglas
1debfb3315 HID: debugfs: wake up reading tasks upon event
Some devices poke the hid core in a way that causes hid_debug_event to
be called, while never calling hid_dump_input. Without this wakeup
addition, tasks reading for hid events through debugfs may never see any
events. It may be that a well written driver doesn't cause this, but
then what's the point of debugfs?

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 12:04:03 +02:00
Rafi Rubin
0277873c05 HID: ntrig: identify firmware version
This adds firmware version polling to the end of probe and reports the
version both in the raw form and proccessed to match the formatting used
by N-Trig.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 11:46:19 +02:00
Chase Douglas
a462230e16 HID: magicmouse: enable Magic Trackpad support
The trackpad speaks a similar, but different, protocol from the magic
mouse. However, only small code tweaks here and there are needed to make
basic multitouch work.

Extra logic is required for single-touch emulation of the touchpad. The
changes made here take the approach that only one finger may emulate the
single pointer when multiple fingers have touched the screen. Once that
finger is raised, all touches must be raised before any further single
touch events can be sent.

Sometimes the magic trackpad sends two distinct touch reports as one big
report. Simply splitting the packet in two and resending them through
magicmouse_raw_event ensures they are handled properly.

I also added myself to the copyright statement.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 18:20:47 +02:00
Chase Douglas
6de048bf1d HID: magicmouse: simplify touch data bit manipulation
The new format should be easier to read to determine which bits
correspond to which data. It also brings all the manipulation logic to
the top of the function. This makes size and orientation reading more
clear.

Note that the impetus for this change is the forthcoming support for the
Magic Trackpad, which has a different touch data protocol.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 18:20:23 +02:00
Chase Douglas
0773590c89 HID: magicmouse: simplify multitouch feature request
Only the first feature request is required to put the Magic Mouse into
multitouch mode. This is also the case for the Magic Trackpad, for which
support will be added in a later commit.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 15:57:43 +02:00
Johan Hovold
d34c4aa43d HID: add no-get quirk for eGalax touch controller
Add no-get quirk for eGalax touch controller to avoid timeout at probe.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 12:12:55 +02:00
Chase Douglas
c61b7cee67 HID: magicmouse: remove timestamp logic
The timestamps from the device are currently stored in the private data
structure. These aren't used, so remove them. I've left a comment
detailing the protocol for future reference.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 16:51:54 +02:00
Chase Douglas
0228db70ce HID: magicmouse: simplify touch down logic
For the MT protocol, we need to properly keep track of each down touch.
This change simplifies the logic, and should make things easier when
support for the Magic Trackpad is added.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 16:49:52 +02:00
Antonio Ospite
816651a7d4 HID: sony: Apply sixaxis quirks only to sixaxis
Be more explicit and avoid calling sony_set_operational_usb() when we
have USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE.

While at it, rename the sony_set_operational routines to
sixaxis_set_operational as they are sixaxis specific.

This is also in preparation for the sysfs interface to set and get bdaddr
over usb and for some other Sixaxis report fixup.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 09:40:40 +02:00