Commit Graph

268 Commits

Author SHA1 Message Date
Linus Torvalds 9228ff9038 Merge branch 'for-3.8/drivers' of git://git.kernel.dk/linux-block
Pull block driver update from Jens Axboe:
 "Now that the core bits are in, here are the driver bits for 3.8.  The
  branch contains:

   - A huge pile of drbd bits that were dumped from the 3.7 merge
     window.  Following that, it was both made perfectly clear that
     there is going to be no more over-the-wall pulls and how the
     situation on individual pulls can be improved.

   - A few cleanups from Akinobu Mita for drbd and cciss.

   - Queue improvement for loop from Lukas.  This grew into adding a
     generic interface for waiting/checking an even with a specific
     lock, allowing this to be pulled out of md and now loop and drbd is
     also using it.

   - A few fixes for xen back/front block driver from Roger Pau Monne.

   - Partition improvements from Stephen Warren, allowing partiion UUID
     to be used as an identifier."

* 'for-3.8/drivers' of git://git.kernel.dk/linux-block: (609 commits)
  drbd: update Kconfig to match current dependencies
  drbd: Fix drbdsetup wait-connect, wait-sync etc... commands
  drbd: close race between drbd_set_role and drbd_connect
  drbd: respect no-md-barriers setting also when changed online via disk-options
  drbd: Remove obsolete check
  drbd: fixup after wait_even_lock_irq() addition to generic code
  loop: Limit the number of requests in the bio list
  wait: add wait_event_lock_irq() interface
  xen-blkfront: free allocated page
  xen-blkback: move free persistent grants code
  block: partition: msdos: provide UUIDs for partitions
  init: reduce PARTUUID min length to 1 from 36
  block: store partition_meta_info.uuid as a string
  cciss: use check_signature()
  cciss: cleanup bitops usage
  drbd: use copy_highpage
  drbd: if the replication link breaks during handshake, keep retrying
  drbd: check return of kmalloc in receive_uuids
  drbd: Broadcast sync progress no more often than once per second
  drbd: don't try to clear bits once the disk has failed
  ...
2012-12-17 13:39:11 -08:00
Lukas Czerner eed8c02e68 wait: add wait_event_lock_irq() interface
New wait_event{_interruptible}_lock_irq{_cmd} macros added. This commit
moves the private wait_event_lock_irq() macro from MD to regular wait
includes, introduces new macro wait_event_lock_irq_cmd() instead of using
the old method with omitting cmd parameter which is ugly and makes a use
of new macros in the MD. It also introduces the _interruptible_ variant.

The use of new interface is when one have a special lock to protect data
structures used in the condition, or one also needs to invoke "cmd"
before putting it to sleep.

All new macros are expected to be called with the lock taken. The lock
is released before sleep and is reacquired afterwards. We will leave the
macro with the lock held.

Note to DM: IMO this should also fix theoretical race on waitqueue while
using simultaneously wait_event_lock_irq() and wait_event() because of
lack of locking around current state setting and wait queue removal.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-30 11:47:57 +01:00
NeilBrown 874807a831 md/raid1{,0}: fix deadlock in bitmap_unplug.
If the raid1 or raid10 unplug function gets called
from a make_request function (which is very possible) when
there are bios on the current->bio_list list, then it will not
be able to successfully call bitmap_unplug() and it could
need to submit more bios and wait for them to complete.
But they won't complete while current->bio_list is non-empty.

So detect that case and handle the unplugging off to another thread
just like we already do when called from within the scheduler.

RAID1 version of bug was introduced in 3.6, so that part of fix is
suitable for 3.6.y.  RAID10 part won't apply.

Cc: stable@vger.kernel.org
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reported-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-27 12:14:40 +11:00
NeilBrown 02b898f2f0 md/raid1: Fix assembling of arrays containing Replacements.
setup_conf in raid1.c uses conf->raid_disks before assigning
a value.  It is used when including 'Replacement' devices.

The consequence is that assembling an array which contains a
replacement will misbehave and either not include the replacement, or
not include the device being replaced.

Though this doesn't lead directly to data corruption, it could lead to
reduced data safety.

So use mddev->raid_disks, which is initialised, instead.

Bug was introduced by commit c19d57980b
      md/raid1: recognise replacements when assembling arrays.

in 3.3, so fix is suitable for 3.3.y thru 3.6.y.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-31 11:42:03 +11:00
Jianpeng Ma 7f7583d420 Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races
Now that multiple threads can handle stripes, it is safer to
use an atomic64_t for resync_mismatches, to avoid update races.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 14:17:59 +11:00
NeilBrown 7ad4d4a68a md/raid1: Don't release reference to device while handling read error.
When we get a read error, we arrange for raid1d to handle it.
Currently we release the reference on the device.  This can result
in
   conf->mirrors[read_disk].rdev
being NULL in fix_read_error, if the device happens to get removed
before the read error is handled.

So instead keep the reference until the read error has been fully
handled.

Reported-by: hank <pyu@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:44:30 +11:00
Shaohua Li 4ed8731d8e MD: change the parameter of md thread
Change the thread parameter, so the thread can carry extra info. Next patch
will use it.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:34:00 +11:00
Shaohua Li 2ff8cc2c6d md: raid 1 supports TRIM
This makes md raid 1 support TRIM.
If one disk supports discard and another not, or one has discard_zero_data and
another not, there could be inconsistent between data from such disks. But this
should not matter, discarded data is useless. This will add extra copy in rebuild
though.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:28:54 +11:00
Linus Torvalds 25aa6a7ae4 Additional md update for 3.6
This contains a few patches that depend on
 plugging changes in the block layer so needs to wait
 for those.
 It also contains a Kconfig fix for the new RAID10 support
 in dm-raid.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIVAwUAUBnKUznsnt1WYoG5AQJOQA/+M7RoVnF63+TbGIqdNDotuF8FxvudCZBl
 Ou2yG47EOPtWf/RoqPyfpydDgdjyXsk4T5TfXoc0hsXVr4shCYo51uT9K34TMSDJ
 2GzGWuyugRJFyvxW7PBgM+zFWlcVdgUGcwsdmIUMtHRz8Q10TqO5fE22RNLkhwOl
 fvGCK1KYnQqlG87DbulHWMo22vyZVic8jBqFSw55CPuuFMSJMxCw0rOPUnvk5Q8v
 jWzZzuUqrM8iiOxTDHsbCA0IleCbGl/m0tgk02Vj4tkCvz9N/xzQW2se0H6uECiK
 k8odbAiNBOh1q135sa7ASrBzxT+JqSiQ25rLheTEzzNxjFv6/NlntXmYu6HB+lD3
 DoHAvRjgMxiLCdisW6TJb10NItitXwE/HSpQOVRxyYtINdzmhIDaCccgfN8ZMkho
 nmE/uzO+CAoCFpZC2C/nY8D0BZs5fw4hgDAsci66mvs+88dy+SoA4AbyNEMAusOS
 tiL8ZEjnYXvxTh3JFaMIaqQd6PkbahmtEtvorwXsUYUdY0ybkcs2FYVksvkgYdyW
 WlejOZVurY2i5biqck3UqjesxeJA5TMAlAUQR7vXu1Fa9fYFXZbqJom/KnPRTfek
 xerCWPMbhuzmcyEjUOGfjs6GFEnEmRT6Q6fN3CBaQMS2Q/z+6AkTOXKVl5Fhvoyl
 aeu1m8nZLuI=
 =ovN2
 -----END PGP SIGNATURE-----

Merge tag 'md-3.6' of git://neil.brown.name/md

Pull additional md update from NeilBrown:
 "This contains a few patches that depend on plugging changes in the
  block layer so needed to wait for those.

  It also contains a Kconfig fix for the new RAID10 support in dm-raid."

* tag 'md-3.6' of git://neil.brown.name/md:
  md/dm-raid: DM_RAID should select MD_RAID10
  md/raid1: submit IO from originating thread instead of md thread.
  raid5: raid5d handle stripe in batch way
  raid5: make_request use batch stripe release
2012-08-02 11:34:40 -07:00
NeilBrown f54a9d0e59 md/raid1: submit IO from originating thread instead of md thread.
queuing writes to the md thread means that all requests go through the
one processor which may not be able to keep up with very high request
rates.

So use the plugging infrastructure to submit all requests on unplug.
If a 'schedule' is needed, we fall back on the old approach of handing
the requests to the thread for it to handle.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02 08:33:20 +10:00
Linus Torvalds eff0d13f38 Merge branch 'for-3.6/drivers' of git://git.kernel.dk/linux-block
Pull block driver changes from Jens Axboe:

 - Making the plugging support for drivers a bit more sane from Neil.
   This supersedes the plugging change from Shaohua as well.

 - The usual round of drbd updates.

 - Using a tail add instead of a head add in the request completion for
   ndb, making us find the most completed request more quickly.

 - A few floppy changes, getting rid of a duplicated flag and also
   running the floppy init async (since it takes forever in boot terms)
   from Andi.

* 'for-3.6/drivers' of git://git.kernel.dk/linux-block:
  floppy: remove duplicated flag FD_RAW_NEED_DISK
  blk: pass from_schedule to non-request unplug functions.
  block: stack unplug
  blk: centralize non-request unplug handling.
  md: remove plug_cnt feature of plugging.
  block/nbd: micro-optimization in nbd request completion
  drbd: announce FLUSH/FUA capability to upper layers
  drbd: fix max_bio_size to be unsigned
  drbd: flush drbd work queue before invalidate/invalidate remote
  drbd: fix potential access after free
  drbd: call local-io-error handler early
  drbd: do not reset rs_pending_cnt too early
  drbd: reset congestion information before reporting it in /proc/drbd
  drbd: report congestion if we are waiting for some userland callback
  drbd: differentiate between normal and forced detach
  drbd: cleanup, remove two unused global flags
  floppy: Run floppy initialization asynchronous
2012-08-01 09:06:47 -07:00
NeilBrown 0021b7bc04 md: remove plug_cnt feature of plugging.
This seemed like a good idea at the time, but after further thought I
cannot see it making a difference other than very occasionally and
testing to try to exercise the case it is most likely to help did not
show any performance difference by removing it.

So remove the counting of active plugs and allow 'pending writes' to
be activated at any time, not just when no plugs are active.

This is only relevant when there is a write-intent bitmap, and the
updating of the bitmap will likely introduce enough delay that
the single-threading of bitmap updates will be enough to collect large
numbers of updates together.

Removing this will make it easier to centralise the unplug code, and
will clear the other for other unplug enhancements which have a
measurable effect.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31 09:08:14 +02:00
Alexander Lyakas d57368afe6 md/RAID1: Add missing case for attempting to repair known bad blocks.
When doing resync or repair, attempt to correct bad blocks, according
to WriteErrorSeen policy

Signed-off-by: Alex Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 12:01:29 +10:00
NeilBrown b7219ccb33 md/raid1: don't abort a resync on the first badblock.
If a resync of a RAID1 array with 2 devices finds a known bad block
one device it will neither read from, or write to, that device for
this block offset.
So there will be one read_target (The other device) and zero write
targets.
This condition causes md/raid1 to abort the resync assuming that it
has finished - without known bad blocks this would be true.

When there are no write targets because of the presence of bad blocks
we should only skip over the area covered by the bad block.
RAID10 already gets this right, raid1 doesn't.  Or didn't.

As this can cause a 'sync' to abort early and appear to have succeeded
it could lead to some data corruption, so it suitable for -stable.

Cc: stable@vger.kernel.org
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:05:34 +10:00
Shaohua Li 12cee5a8a2 md/raid1: prevent merging too large request
For SSD, if request size exceeds specific value (optimal io size), request size
isn't important for bandwidth. In such condition, if making request size bigger
will cause some disks idle, the total throughput will actually drop. A good
example is doing a readahead in a two-disk raid1 setup.

So when should we split big requests? We absolutly don't want to split big
request to very small requests. Even in SSD, big request transfer is more
efficient. This patch only considers request with size above optimal io size.

If all disks are busy, is it worth doing a split? Say optimal io size is 16k,
two requests 32k and two disks. We can let each disk run one 32k request, or
split the requests to 4 16k requests and each disk runs two. It's hard to say
which case is better, depending on hardware.

So only consider case where there are idle disks. For readahead, split is
always better in this case. And in my test, below patch can improve > 30%
thoughput. Hmm, not 100%, because disk isn't 100% busy.

Such case can happen not just in readahead, for example, in directio. But I
suppose directio usually will have bigger IO depth and make all disks busy, so
I ignored it.

Note: if the raid uses any hard disk, we don't prevent merging. That will make
performace worse.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Shaohua Li 9dedf60313 md/raid1: read balance chooses idlest disk for SSD
SSD hasn't spindle, distance between requests means nothing. And the original
distance based algorithm sometimes can cause severe performance issue for SSD
raid.

Considering two thread groups, one accesses file A, the other access file B.
The first group will access one disk and the second will access the other disk,
because requests are near from one group and far between groups. In this case,
read balance might keep one disk very busy but the other relative idle.  For
SSD, we should try best to distribute requests to as many disks as possible.
There isn't spindle move penality anyway.

With below patch, I can see more than 50% throughput improvement sometimes
depending on workloads.

The only exception is small requests can be merged to a big request which
typically can drive higher throughput for SSD too. Such small requests are
sequential reads. Unlike hard disk, sequential read which can't be merged (for
example direct IO, or read without readahead) can be ignored for SSD. Again
there is no spindle move penality. readahead dispatches small requests and such
requests can be merged.

Last patch can help detect sequential read well, at least if concurrent read
number isn't greater than raid disk number. In that case, distance based
algorithm doesn't work well too.

V2: For hard disk and SSD mixed raid, doesn't use distance based algorithm for
random IO too. This makes the algorithm generic for raid with SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Shaohua Li be4d3280b1 md/raid1: make sequential read detection per disk based
Currently the sequential read detection is global wide. It's natural to make it
per disk based, which can improve the detection for concurrent multiple
sequential reads. And next patch will make SSD read balance not use distance
based algorithm, where this change help detect truly sequential read for SSD.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:53 +10:00
Jonathan Brassow 473e87ce48 MD: Move macros from raid1*.h to raid1*.c
MD RAID1/RAID10: Move some macros from .h file to .c file

There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined
in both raid1.h and raid10.h.  They are only used in there respective .c files.
However, if we wish to make RAID10 accessible to the device-mapper RAID
target (dm-raid.c), then we need to move these macros into the .c files where
they are used so that they do not conflict with each other.

The macros from the two files are identical and could be moved into md.h, but
I chose to leave the duplication and have them remain in the personality
files.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
Jonathan Brassow 0eaf822cb3 MD RAID1: rename mirror_info structure
MD RAID1: Rename the structure 'mirror_info' to 'raid1_info'

The same structure name ('mirror_info') is used by raid10.  Each of these
structures are defined in there respective header files.  If dm-raid is
to support both RAID1 and RAID10, the header files will be included and
the structure names must not collide.  While only one of these structure
names needs to change, this patch adds consistency to the naming of the
structure.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31 10:03:52 +10:00
NeilBrown 58e94ae184 md/raid1: close some possible races on write errors during resync
commit 4367af5561
   md/raid1: clear bad-block record when write succeeds.

Added a 'reschedule_retry' call possibility at the end of
end_sync_write, but didn't add matching code at the end of
sync_request_write.  So if the writes complete very quickly, or
scheduling makes it seem that way, then we can miss rescheduling
the request and the resync could hang.

Also commit 73d5c38a95
    md: avoid races when stopping resync.

Fix a race condition in this same code in end_sync_write but didn't
make the change in sync_request_write.

This patch updates sync_request_write to fix both of those.
Patch is suitable for 3.1 and later kernels.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Original-version-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-19 15:59:18 +10:00
NeilBrown 2d4f4f3384 md/raid1: fix use-after-free bug in RAID1 data-check code.
This bug has been present ever since data-check was introduce
in 2.6.16.  However it would only fire if a data-check were
done on a degraded array, which was only possible if the array
has 3 or more devices.  This is certainly possible, but is quite
uncommon.

Since hot-replace was added in 3.3 it can happen more often as
the same condition can arise if not all possible replacements are
present.

The problem is that as soon as we submit the last read request, the
'r1_bio' structure could be freed at any time, so we really should
stop looking at it.  If the last device is being read from we will
stop looking at it.  However if the last device is not due to be read
from, we will still check the bio pointer in the r1_bio, but the
r1_bio might already be free.

So use the read_targets counter to make sure we stop looking for bios
to submit as soon as we have submitted them all.

This fix is suitable for any -stable kernel since 2.6.16.

Cc: stable@vger.kernel.org
Reported-by: Arnold Schulz <arnysch@gmx.net>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-09 11:34:13 +10:00
NeilBrown b357f04a67 md: fix up plugging (again).
The value returned by "mddev_check_plug" is only valid until the
next 'schedule' as that will unplug things.  This could happen at any
call to mempool_alloc.
So just calling mddev_check_plug at the start doesn't really make
sense.

So call it just before, or just after, queuing things for the thread.
As the action that happens at unplug is to wake the thread, this makes
lots of sense.
If we cannot add a plug (which requires a small GFP_ATOMIC alloc) we
wake thread immediately.

RAID5 is a bit different.  Requests are queued for the thread and the
thread is woken by release_stripe.  So we don't need to wake the
thread on failure.
However the thread doesn't perform certain actions when there is any
active plug, so it is important to install a plug before waking the
thread.  So for RAID5 we install the plug *before* queuing the request
and waking the thread.

Without this patch it is possible for raid1 or raid10 to queue a
request without then waking the thread, resulting in the array locking
up.

Also change raid10 to only flush_pending_write when there are not
active plugs, just like raid1.

This patch is suitable for 3.0 or later.  I plan to submit it to
-stable, but I'll like to let it spend a few weeks in mainline
first to be sure it is completely safe.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 17:45:31 +10:00
NeilBrown 32644afd89 md/raid1: fix bug in read_balance introduced by hot-replace
When we added hot_replace we doubled the number of devices
that could be in a RAID1 array.  So we doubled how far read_balance
would search.  Unfortunately we didn't double the point at which
it looped back to the beginning - so it effectively loops over
all non-replacement disks twice.
This doesn't cause bad behaviour, but it pointless and means we
never read from replacement devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:58:42 +10:00
NeilBrown 0232605d98 md: make 'name' arg to md_register_thread non-optional.
Having the 'name' arg optional and defaulting to the current
personality name is no necessary and leads to errors, as when
changing the level of an array we can end up using the
name of the old level instead of the new one.

So make it non-optional and always explicitly pass the name
of the level that the array will be.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:56:52 +10:00
NeilBrown aba336bd1d md: raid1/raid10: fix problem with merge_bvec_fn
The new merge_bvec_fn which calls the corresponding function
in subsidiary devices requires that mddev->merge_check_needed
be set if any child has a merge_bvec_fn.

However were were only setting that when a device was hot-added,
not when a device was present from the start.

This bug was introduced in 3.4 so patch is suitable for 3.4.y
kernels.  However that are conflicts in raid10.c so a separate
patch will be needed for 3.4.y.

Cc: stable@vger.kernel.org
Reported-by: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-31 15:56:30 +10:00
Jonathan Brassow 4f0a5e012c MD RAID1: Further conditionalize 'fullsync'
A RAID1 device does not necessarily need a fullsync if the bitmap can be used instead.

Similar to commit d6b212f4b1 in raid5.c, if a raid1
device can be brought back (i.e. from a transient failure) it shouldn't need a
complete resync.  Provided the bitmap is not to old, it will have recorded the areas
of the disk that need recovery.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:31 +10:00
NeilBrown a4a6125a07 md: allow array to be resized while bitmap is present.
Now that bitmaps can be resized, we can allow an array to be resized
while the bitmap is present.

This only covers resizing that involves changing the effective size
of member devices, not resizing that changes the number of devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:27 +10:00
majianpeng da8840a747 md/raid1: allow fix_read_error to read from recovering device.
When attempting to fix a read error, it is acceptable to read from a
device that is recovering, provided the recovery has got past the
place we are reading from.  This makes the test for "can we read from
here" the same as the test in read_balance.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:55:03 +10:00
NeilBrown c6563a8c38 md: add possibility to change data-offset for devices.
When reshaping we can avoid costly intermediate backup by
changing the 'start' address of the array on the device
(if there is enough room).

So as a first step, allow such a change to be requested
through sysfs, and recorded in v1.x metadata.

(As we didn't previous check that all 'pad' fields were zero,
 we need a new FEATURE flag for this.
 A (belatedly) check that all remaining 'pad' fields are
 zero to avoid a repeat of this)

The new data offset must be requested separately for each device.
This allows each to have a different change in the data offset.
This is not likely to be used often but as data_offset can be
set per-device, new_data_offset should be too.

This patch also removes the 'acknowledged' arg to rdev_set_badblocks as
it is never used and never will be.  At the same time we add a new
arg ('in_new') which is currently always zero but will be used more
soon.

When a reshape finishes we will need to update the data_offset
and rdev->sectors.  So provide an exported function to do that.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21 09:27:00 +10:00
majianpeng f4380a9158 md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery.
If r1bio->sectors % 8 != 0,then the memcmp and a later
memcpy will omit the last bio_vec.

This is suitable for any stable kernel since 3.1 when bad-block
management was introduced.

Cc: stable@vger.kernel.org
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-12 16:04:47 +10:00
NeilBrown 5020ad7d14 md/raid1,raid10: don't compare excess byte during consistency check.
When comparing two pages read from different legs of a mirror, only
compare the bytes that were read, not the whole page.

In most cases we read a whole page, but in some cases with
bad blocks or odd sizes devices we might read fewer than that.

This bug has been present "forever" but at worst it might cause
a report of two many mismatches and generate a little bit
extra resync IO, so there is no need to back-port to -stable
kernels.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:39:23 +10:00
majianpeng a42f9d83b5 md/raid1:Remove unnecessary rcu_dereference(conf->mirrors[i].rdev).
Because rde->nr_pending > 0,so can not remove this disk.
And in any case, we aren't holding rcu_read_lock()

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:37:33 +10:00
majianpeng 5220ea1e64 md/raid1: If md_integrity_register() failed,run() must free the mem
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-02 09:48:38 +10:00
NeilBrown 6b740b8d79 md/raid1: handle merge_bvec_fn in member devices.
Currently we don't honour merge_bvec_fn in member devices so if there
is one, we force all requests to be single-page at most.
This is not ideal.

So create a raid1 merge_bvec_fn to check that function in children
as well.

This introduces a small problem.  There is no locking around calls
the ->merge_bvec_fn and subsequent calls to ->make_request.  So a
device added between these could end up getting a request which
violates its merge_bvec_fn.

Currently the best we can do is synchronize_sched().  This will work
providing no preemption happens.  If there is is preemption, we just
have to hope that new devices are largely consistent with old devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
NeilBrown dafb20fa34 md: tidy up rdev_for_each usage.
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an
mddev.  However it uses the 'safe' version of list_for_each_entry,
and so requires the extra variable, but doesn't include 'safe' in the
name, which is useful documentation.

Consequently some places use this safe version without needing it, and
many use an explicity list_for_each entry.

So:
 - rename rdev_for_each to rdev_for_each_safe
 - create a new rdev_for_each which uses the plain
   list_for_each_entry,
 - use the 'safe' version only where needed, and convert all other
   list_for_each_entry calls to use rdev_for_each.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
NeilBrown d6b42dcb99 md/raid1,raid10: avoid deadlock during resync/recovery.
If RAID1 or RAID10 is used under LVM or some other stacking
block device, it is possible to enter a deadlock during
resync or recovery.
This can happen if the upper level block device creates
two requests to the RAID1 or RAID10.  The first request gets
processed, blocks recovery and queue requests for underlying
requests in current->bio_list.  A resync request then starts
which will wait for those requests and block new IO.

But then the second request to the RAID1/10 will be attempted
and it cannot progress until the resync request completes,
which cannot progress until the underlying device requests complete,
which are on a queue behind that second request.

So allow that second request to proceed even though there is
a resync request about to start.

This is suitable for any -stable kernel.

Cc: stable@vger.kernel.org
Reported-by: Ray Morris <support@bettercgi.com>
Tested-by: Ray Morris <support@bettercgi.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:38 +11:00
NeilBrown f53e29fc87 md/raid1: fix buglet in md_raid1_contested.
Since we added 'replacement' capability, RAID1 can have twice
as many devices as ->raid_disks indicates.
So md_raid1_congested needs to check that many possible devices,
not just ->raid_disks many.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-13 14:24:05 +11:00
NeilBrown 307729c8bc md/raid1: perform bad-block tests for WriteMostly devices too.
We normally try to avoid reading from write-mostly devices, but when
we do we really have to check for bad blocks and be sure not to
try reading them.

With the current code, best_good_sectors might not get set and that
causes zero-length read requests to be send down which is very
confusing.

This bug was introduced in commit d2eb35acfd and so the patch
is suitable for 3.1.x and 3.2.x

Reported-and-tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reported-and-tested-by: Art -kwaak- van Breemen <ard@telegraafnet.nl>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org
2012-01-11 08:35:17 +11:00
NeilBrown 19d671695e md/raid1: Mark device want_replacement when we see a write error.
Now that WantReplacement drives are replaced cleanly, mark a drive
as want_replacement when we see a write error.  It might get failed soon so
the WantReplacement flag is irrelevant, but if the write error is recorded
in the bad block log, we still want to activate any spare that might
be available.

Signed-off-by:  NeilBrown <neilb@suse.de>
2011-12-23 10:17:57 +11:00
NeilBrown 7ef449d1ec md/raid1: If there is a spare and a want_replacement device, start replacement.
When attempting to add a spare to a RAID1 array, also consider
adding it as a replacement for a want_replacement device.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:57 +11:00
NeilBrown c19d57980b md/raid1: recognise replacements when assembling arrays.
If a Replacement is seen, file it as such.

If we see two replacements (or two normal devices) for the one slot,
abort.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:57 +11:00
NeilBrown 8c7a2c2bcf md/raid1: handle activation of replacement device when recovery completes.
When recovery completes ->spare_active is called.
This checks if the replacement is ready and if so it fails
the original.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:57 +11:00
NeilBrown b014f14c81 md/raid1: Allow a failed replacement device to be removed.
Replacement devices are stored at a different offset, so look
there too.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
NeilBrown 8f19ccb2fd md/raid1: Allocate spare to store replacement devices and their bios.
In RAID1, a replacement is much like a normal device, so we just
double the size of the relevant arrays and look at all possible
devices for reads and writes.

This means that the array looks like it is now double the size in some
way - we need to be careful about that.
In particular, we checking if the array is still degraded while
creating a recovery request we need to only consider the first 'half'
- i.e. the real (non-replacement) devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
NeilBrown 301946364e md/raid1: Replace use of mddev->raid_disks with conf->raid_disks.
In general mddev->raid_disks can change unexpectedly while
conf->raid_disks will only change in a very controlled way.  So change
some uses of one to the other.

The use of mddev->raid_disks will not cause actually problems but
this way is more consistent and safer in the long term.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
NeilBrown b8321b68d1 md: change hot_remove_disk to take an rdev rather than a number.
Soon an array will be able to have multiple devices with the
same raid_disk number (an original and a replacement).  So removing
a device based on the number won't work.  So pass the actual device
handle instead.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Paul Gortmaker 056075c764 md: Add module.h to all files using it implicitly
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in md dir
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:18 -04:00
NeilBrown d890fa2b05 md: Fix some bugs in recovery_disabled handling.
In 3.0 we changed the way recovery_disabled was handle so that instead
of testing against zero, we test an mddev-> value against a conf->
value.
Two problems:
  1/ one place in raid1 was missed and still sets to '1'.
  2/ We didn't explicitly set the conf-> value at array creation
     time.
     It defaulted to '0' just like the mddev value does so they
     could appear equal and thus disable recovery.
     This did not affect normal 'md' as it calls bind_rdev_to_array
     which changes the mddev value.  However the dmraid interface
     doesn't call this and so doesn't change ->recovery_disabled; so at
     array start all recovery is incorrectly disabled.

So initialise the 'conf' value to one less that the mddev value, so
the will only be the same when explicitly set that way.

Reported-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown  <neilb@suse.de>
2011-10-26 11:54:39 +11:00