Commit graph

47 commits

Author SHA1 Message Date
Linus Torvalds
d7fc02c7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
  mac80211: fix reorder buffer release
  iwmc3200wifi: Enable wimax core through module parameter
  iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
  iwmc3200wifi: Coex table command does not expect a response
  iwmc3200wifi: Update wiwi priority table
  iwlwifi: driver version track kernel version
  iwlwifi: indicate uCode type when fail dump error/event log
  iwl3945: remove duplicated event logging code
  b43: fix two warnings
  ipw2100: fix rebooting hang with driver loaded
  cfg80211: indent regulatory messages with spaces
  iwmc3200wifi: fix NULL pointer dereference in pmkid update
  mac80211: Fix TX status reporting for injected data frames
  ath9k: enable 2GHz band only if the device supports it
  airo: Fix integer overflow warning
  rt2x00: Fix padding bug on L2PAD devices.
  WE: Fix set events not propagated
  b43legacy: avoid PPC fault during resume
  b43: avoid PPC fault during resume
  tcp: fix a timewait refcnt race
  ...

Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
	kernel/sysctl_check.c
	net/ipv4/sysctl_net_ipv4.c
	net/ipv6/addrconf.c
	net/sctp/sysctl.c
2009-12-08 07:55:01 -08:00
Eric W. Biederman
942405f360 sysctl: Remove the cond_syscall entry for sys32_sysctl
Now that all architechtures are use compat_sys_sysctl and sys32_sysctl
does not exist there is not point in retaining a cond_syscall
entry for it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-06 03:53:59 -08:00
Arnaldo Carvalho de Melo
a2e2725541 net: Introduce recvmmsg socket syscall
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:40:10 -07:00
David S. Miller
8b3f6af863 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/cpc-usb/TODO
	drivers/staging/cpc-usb/cpc-usb_drv.c
	drivers/staging/cpc-usb/cpc.h
	drivers/staging/cpc-usb/cpc_int.h
	drivers/staging/cpc-usb/cpcusb.h
2009-09-24 15:13:11 -07:00
Andrew Morton
dedcf2971c net: fix CONFIG_NET=n build on sparc64
sparc64 allnoconfig:

arch/sparc/kernel/built-in.o(.text+0x134e0): In function `sys32_recvfrom':
: undefined reference to `compat_sys_recvfrom'
arch/sparc/kernel/built-in.o(.text+0x134e4): In function `sys32_recvfrom':
: undefined reference to `compat_sys_recvfrom'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-21 11:32:27 -07:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Ingo Molnar
77835492ed Merge commit 'v2.6.29-rc2' into perfcounters/core
Conflicts:
	include/linux/syscalls.h
2009-01-21 16:37:27 +01:00
Heiko Carstens
f627a741d2 [CVE-2009-0029] Make sys_syslog a conditional system call
Remove the -ENOSYS implementation for !CONFIG_PRINTK and use
the cond_syscall infrastructure instead.

Acked-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:16 +01:00
Thomas Gleixner
0793a61d4d performance counters: core code
Implement the core kernel bits of Performance Counters subsystem.

The Linux Performance Counter subsystem provides an abstraction of
performance counter hardware capabilities. It provides per task and per
CPU counters, and it provides event capabilities on top of those.

Performance counters are accessed via special file descriptors.
There's one file descriptor per virtual counter used.

The special file descriptor is opened via the perf_counter_open()
system call:

 int
 perf_counter_open(u32 hw_event_type,
                   u32 hw_event_period,
                   u32 record_type,
                   pid_t pid,
                   int cpu);

The syscall returns the new fd. The fd can be used via the normal
VFS system calls: read() can be used to read the counter, fcntl()
can be used to set the blocking mode, etc.

Multiple counters can be kept open at a time, and the counters
can be poll()ed.

See more details in Documentation/perf-counters.txt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:47:03 +01:00
Ulrich Drepper
de11defebf reintroduce accept4
Introduce a new accept4() system call.  The addition of this system call
matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(),
inotify_init1(), epoll_create1(), pipe2()) which added new system calls
that differed from analogous traditional system calls in adding a flags
argument that can be used to access additional functionality.

The accept4() system call is exactly the same as accept(), except that
it adds a flags bit-mask argument.  Two flags are initially implemented.
(Most of the new system calls in 2.6.27 also had both of these flags.)

SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled
for the new file descriptor returned by accept4().  This is a useful
security feature to avoid leaking information in a multithreaded
program where one thread is doing an accept() at the same time as
another thread is doing a fork() plus exec().  More details here:
http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling",
Ulrich Drepper).

The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag
to be enabled on the new open file description created by accept4().
(This flag is merely a convenience, saving the use of additional calls
fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result.

Here's a test program.  Works on x86-32.  Should work on x86-64, but
I (mtk) don't have a system to hand to test with.

It tests accept4() with each of the four possible combinations of
SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies
that the appropriate flags are set on the file descriptor/open file
description returned by accept4().

I tested Ulrich's patch in this thread by applying against 2.6.28-rc2,
and it passes according to my test program.

/* test_accept4.c

  Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk
       <mtk.manpages@gmail.com>

  Licensed under the GNU GPLv2 or later.
*/
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <stdlib.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>

#define PORT_NUM 33333

#define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0)

/**********************************************************************/

/* The following is what we need until glibc gets a wrapper for
  accept4() */

/* Flags for socket(), socketpair(), accept4() */
#ifndef SOCK_CLOEXEC
#define SOCK_CLOEXEC    O_CLOEXEC
#endif
#ifndef SOCK_NONBLOCK
#define SOCK_NONBLOCK   O_NONBLOCK
#endif

#ifdef __x86_64__
#define SYS_accept4 288
#elif __i386__
#define USE_SOCKETCALL 1
#define SYS_ACCEPT4 18
#else
#error "Sorry -- don't know the syscall # on this architecture"
#endif

static int
accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags)
{
   printf("Calling accept4(): flags = %x", flags);
   if (flags != 0) {
       printf(" (");
       if (flags & SOCK_CLOEXEC)
           printf("SOCK_CLOEXEC");
       if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK))
           printf(" ");
       if (flags & SOCK_NONBLOCK)
           printf("SOCK_NONBLOCK");
       printf(")");
   }
   printf("\n");

#if USE_SOCKETCALL
   long args[6];

   args[0] = fd;
   args[1] = (long) sockaddr;
   args[2] = (long) addrlen;
   args[3] = flags;

   return syscall(SYS_socketcall, SYS_ACCEPT4, args);
#else
   return syscall(SYS_accept4, fd, sockaddr, addrlen, flags);
#endif
}

/**********************************************************************/

static int
do_test(int lfd, struct sockaddr_in *conn_addr,
       int closeonexec_flag, int nonblock_flag)
{
   int connfd, acceptfd;
   int fdf, flf, fdf_pass, flf_pass;
   struct sockaddr_in claddr;
   socklen_t addrlen;

   printf("=======================================\n");

   connfd = socket(AF_INET, SOCK_STREAM, 0);
   if (connfd == -1)
       die("socket");
   if (connect(connfd, (struct sockaddr *) conn_addr,
               sizeof(struct sockaddr_in)) == -1)
       die("connect");

   addrlen = sizeof(struct sockaddr_in);
   acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen,
                      closeonexec_flag | nonblock_flag);
   if (acceptfd == -1) {
       perror("accept4()");
       close(connfd);
       return 0;
   }

   fdf = fcntl(acceptfd, F_GETFD);
   if (fdf == -1)
       die("fcntl:F_GETFD");
   fdf_pass = ((fdf & FD_CLOEXEC) != 0) ==
              ((closeonexec_flag & SOCK_CLOEXEC) != 0);
   printf("Close-on-exec flag is %sset (%s); ",
           (fdf & FD_CLOEXEC) ? "" : "not ",
           fdf_pass ? "OK" : "failed");

   flf = fcntl(acceptfd, F_GETFL);
   if (flf == -1)
       die("fcntl:F_GETFD");
   flf_pass = ((flf & O_NONBLOCK) != 0) ==
              ((nonblock_flag & SOCK_NONBLOCK) !=0);
   printf("nonblock flag is %sset (%s)\n",
           (flf & O_NONBLOCK) ? "" : "not ",
           flf_pass ? "OK" : "failed");

   close(acceptfd);
   close(connfd);

   printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL");
   return fdf_pass && flf_pass;
}

static int
create_listening_socket(int port_num)
{
   struct sockaddr_in svaddr;
   int lfd;
   int optval;

   memset(&svaddr, 0, sizeof(struct sockaddr_in));
   svaddr.sin_family = AF_INET;
   svaddr.sin_addr.s_addr = htonl(INADDR_ANY);
   svaddr.sin_port = htons(port_num);

   lfd = socket(AF_INET, SOCK_STREAM, 0);
   if (lfd == -1)
       die("socket");

   optval = 1;
   if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval,
                  sizeof(optval)) == -1)
       die("setsockopt");

   if (bind(lfd, (struct sockaddr *) &svaddr,
            sizeof(struct sockaddr_in)) == -1)
       die("bind");

   if (listen(lfd, 5) == -1)
       die("listen");

   return lfd;
}

int
main(int argc, char *argv[])
{
   struct sockaddr_in conn_addr;
   int lfd;
   int port_num;
   int passed;

   passed = 1;

   port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM;

   memset(&conn_addr, 0, sizeof(struct sockaddr_in));
   conn_addr.sin_family = AF_INET;
   conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
   conn_addr.sin_port = htons(port_num);

   lfd = create_listening_socket(port_num);

   if (!do_test(lfd, &conn_addr, 0, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK))
       passed = 0;

   close(lfd);

   exit(passed ? EXIT_SUCCESS : EXIT_FAILURE);
}

[mtk.manpages@gmail.com: rewrote changelog, updated test program]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19 18:49:57 -08:00
Thomas Petazzoni
ebf3f09c63 Configure out AIO support
This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:

   text	   data	    bss	    dec	    hex	filename
1115067	 119180	 217088	1451335	 162547	vmlinux
1108025	 119048	 217088	1444161	 160941	vmlinux.new
  -7042    -132       0   -7174   -1C06 +/-

This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

[randy.dunlap@oracle.com: build fix]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:51 -07:00
Thomas Petazzoni
bfcd17a6c5 Configure out file locking features
This patch adds the CONFIG_FILE_LOCKING option which allows to remove
support for advisory locks. With this patch enabled, the flock()
system call, the F_GETLK, F_SETLK and F_SETLKW operations of fcntl()
and NFS support are disabled. These features are not necessarly needed
on embedded systems. It allows to save ~11 Kb of kernel code and data:

   text          data     bss     dec     hex filename
1125436        118764  212992 1457192  163c28 vmlinux.old
1114299        118564  212992 1445855  160fdf vmlinux
 -11137    -200       0  -11337   -2C49 +/-

This patch has originally been written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: matthew@wil.cx
Cc: linux-fsdevel@vger.kernel.org
Cc: mpm@selenic.com
Cc: akpm@linux-foundation.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 17:56:57 -04:00
Ingo Molnar
9b81361631 signalfd: fix undefined reference to `compat_sys_signalfd4' when !CONFIG_SIGNALFD
fix:

arch/x86/ia32/built-in.o: In function `ia32_sys_call_table':
(.rodata+0xa38): undefined reference to `compat_sys_signalfd4'

on !CONFIG_SIGNALFD.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 11:35:41 -07:00
Wang Chen
5df439ef06 flag parameters: fix compile error of sys_epoll_create1
GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      vmlinux
arch/x86/kernel/built-in.o: In function `sys_call_table':
(.rodata+0x8a4): undefined reference to `sys_epoll_create1'
make: *** [vmlinux] Error 1

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:26 -07:00
Ulrich Drepper
4006553b06 flag parameters: inotify_init
This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before).  The
values accepted for this parameter are function-specific and defined in the
inotify.h header.  Here the values must match the O_* flags, though.  In this
patch CLOEXEC support is introduced.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("inotify_init1(0) set close-on-exit");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:28 -07:00
Ulrich Drepper
b087498eb5 flag parameters: eventfd
This patch adds the new eventfd2 syscall.  It extends the old eventfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("eventfd2(0) sets close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Ulrich Drepper
9deb27baed flag parameters: signalfd
This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Ulrich Drepper
aaca0bdca5 flag parameters: paccept
This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Atsushi Nemoto
5f17156fc5 Fix build on COMPAT platforms when CONFIG_EPOLL is disabled
Add missing cond_syscall() entry for compat_sys_epoll_pwait.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 09:59:41 -07:00
Davide Libenzi
4d672e7ac7 timerfd: new timerfd API
This is the new timerfd API as it is implemented by the following patch:

int timerfd_create(int clockid, int flags);
int timerfd_settime(int ufd, int flags,
		    const struct itimerspec *utmr,
		    struct itimerspec *otmr);
int timerfd_gettime(int ufd, struct itimerspec *otmr);

The timerfd_create() API creates an un-programmed timerfd fd.  The "clockid"
parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME.

The timerfd_settime() API give new settings by the timerfd fd, by optionally
retrieving the previous expiration time (in case the "otmr" parameter is not
NULL).

The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit
is set in the "flags" parameter.  Otherwise it's a relative time.

The timerfd_gettime() API returns the next expiration time of the timer, or
{0, 0} if the timerfd has not been set yet.

Like the previous timerfd API implementation, read(2) and poll(2) are
supported (with the same interface).  Here's a simple test program I used to
exercise the new timerfd APIs:

http://www.xmailserver.org/timerfd-test2.c

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: fix ia64 build]
[akpm@linux-foundation.org: fix m68k build]
[akpm@linux-foundation.org: fix mips build]
[akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds]
[heiko.carstens@de.ibm.com: fix s390]
[akpm@linux-foundation.org: fix powerpc build]
[akpm@linux-foundation.org: fix sparc64 more]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
Paul Mackerras
fa28237cfc [POWERPC] Provide a way to protect 4k subpages when using 64k pages
Using 64k pages on 64-bit PowerPC systems makes life difficult for
emulators that are trying to emulate an ISA, such as x86, which use a
smaller page size, since the emulator can no longer use the MMU and
the normal system calls for controlling page protections.  Of course,
the emulator can emulate the MMU by checking and possibly remapping
the address for each memory access in software, but that is pretty
slow.

This provides a facility for such programs to control the access
permissions on individual 4k sub-pages of 64k pages.  The idea is
that the emulator supplies an array of protection masks to apply to a
specified range of virtual addresses.  These masks are applied at the
level where hardware PTEs are inserted into the hardware page table
based on the Linux PTEs, so the Linux PTEs are not affected.  Note
that this new mechanism does not allow any access that would otherwise
be prohibited; it can only prohibit accesses that would otherwise be
allowed.  This new facility is only available on 64-bit PowerPC and
only when the kernel is configured for 64k pages.

The masks are supplied using a new subpage_prot system call, which
takes a starting virtual address and length, and a pointer to an array
of protection masks in memory.  The array has a 32-bit word per 64k
page to be protected; each 32-bit word consists of 16 2-bit fields,
for which 0 allows any access (that is otherwise allowed), 1 prevents
write accesses, and 2 or 3 prevent any access.

Implicit in this is that the regions of the address space that are
protected are switched to use 4k hardware pages rather than 64k
hardware pages (on machines with hardware 64k page support).  In fact
the whole process is switched to use 4k hardware pages when the
subpage_prot system call is used, but this could be improved in future
to switch only the affected segments.

The subpage protection bits are stored in a 3 level tree akin to the
page table tree.  The top level of this tree is stored in a structure
that is appended to the top level of the page table tree, i.e., the
pgd array.  Since it will often only be 32-bit addresses (below 4GB)
that are protected, the pointers to the first four bottom level pages
are also stored in this structure (each bottom level page contains the
protection bits for 1GB of address space), so the protection bits for
addresses below 4GB can be accessed with one fewer loads than those
for higher addresses.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24 10:06:01 +11:00
David S. Miller
f3baa4827a [COMPAT]: Fix build on COMPAT platforms when CONFIG_NET is disabled.
Add some missing cond_syscall() entries for this case.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 21:29:56 -07:00
Adrian Bunk
0732a552cb kernel/sys_ni.c: add dummy sys_ni_syscall() prototype
kernel/sys_ni.c can't #include <linux/syscalls.h> due to cond_syscall(),
but let's tell gcc to not warn with -Wmissing-prototypes.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Vasily Tarasov
b716395e2b diskquota: 32bit quota tools on 64bit architectures
OpenVZ Linux kernel team has discovered the problem with 32bit quota tools
working on 64bit architectures.  In 2.6.10 kernel sys32_quotactl() function
was replaced by sys_quotactl() with the comment "sys_quotactl seems to be
32/64bit clean, enable it for 32bit" However this isn't right.  Look at
if_dqblk structure:

struct if_dqblk {
        __u64 dqb_bhardlimit;
        __u64 dqb_bsoftlimit;
        __u64 dqb_curspace;
        __u64 dqb_ihardlimit;
        __u64 dqb_isoftlimit;
        __u64 dqb_curinodes;
        __u64 dqb_btime;
        __u64 dqb_itime;
        __u32 dqb_valid;
};

For 32 bit quota tools sizeof(if_dqblk) == 0x44.
But for 64 bit kernel its size is 0x48, 'cause of alignment!
Thus we got a problem. Attached patch reintroduce sys32_quotactl() function,
that handles this and related situations.

[michal.k.k.piotrowski@gmail.com: build fix]
[akpm@linux-foundation.org: Make it link with CONFIG_QUOTA=n]
Signed-off-by: Vasily Tarasov <vtaras@openvz.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:48 -07:00
Heiko Carstens
8df767dd75 compat signalfd and timerfd are cond syscalls
Add missing cond_syscall statements for compat_sys_signalfd and
compat_sys_timerfd.

Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12 10:55:40 -07:00
Davide Libenzi
e1ad7468c7 signal/timer/event: eventfd core
This is a very simple and light file descriptor, that can be used as event
wait/dispatch by userspace (both wait and dispatch) and by the kernel
(dispatch only).  It can be used instead of pipe(2) in all cases where those
would simply be used to signal events.  Their kernel overhead is much lower
than pipes, and they do not consume two fds.  When used in the kernel, it can
offer an fd-bridge to enable, for example, functionalities like KAIO or
syslets/threadlets to signal to an fd the completion of certain operations.
But more in general, an eventfd can be used by the kernel to signal readiness,
in a POSIX poll/select way, of interfaces that would otherwise be incompatible
with it.  The API is:

int eventfd(unsigned int count);

The eventfd API accepts an initial "count" parameter, and returns an eventfd
fd.  It supports poll(2) (POLLIN, POLLOUT, POLLERR), read(2) and write(2).

The POLLIN flag is raised when the internal counter is greater than zero.

The POLLOUT flag is raised when at least a value of "1" can be written to the
internal counter.

The POLLERR flag is raised when an overflow in the counter value is detected.

The write(2) operation can never overflow the counter, since it blocks (unless
O_NONBLOCK is set, in which case -EAGAIN is returned).

But the eventfd_signal() function can do it, since it's supposed to not sleep
during its operation.

The read(2) function reads the __u64 counter value, and reset the internal
value to zero.  If the value read is equal to (__u64) -1, an overflow happened
on the internal counter (due to 2^64 eventfd_signal() posts that has never
been retired - unlickely, but possible).

The write(2) call writes an __u64 count value, and adds it to the current
counter.  The eventfd fd supports O_NONBLOCK also.

On the kernel side, we have:

struct file *eventfd_fget(int fd);
int eventfd_signal(struct file *file, unsigned int n);

The eventfd_fget() should be called to get a struct file* from an eventfd fd
(this is an fget() + check of f_op being an eventfd fops pointer).

The kernel can then call eventfd_signal() every time it wants to post an event
to userspace.  The eventfd_signal() function can be called from any context.
An eventfd() simple test and bench is available here:

http://www.xmailserver.org/eventfd-bench.c

This is the eventfd-based version of pipetest-4 (pipe(2) based):

http://www.xmailserver.org/pipetest-4.c

Not that performance matters much in the eventfd case, but eventfd-bench
shows almost as double as performance than pipetest-4.

[akpm@linux-foundation.org: fix i386 build]
[akpm@linux-foundation.org: add sys_eventfd to sys_ni.c]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Davide Libenzi
b215e28399 signal/timer/event: timerfd core
This patch introduces a new system call for timers events delivered though
file descriptors.  This allows timer event to be used with standard POSIX
poll(2), select(2) and read(2).  As a consequence of supporting the Linux
f_op->poll subsystem, they can be used with epoll(2) too.

The system call is defined as:

int timerfd(int ufd, int clockid, int flags, const struct itimerspec *utmr);

The "ufd" parameter allows for re-use (re-programming) of an existing timerfd
w/out going through the close/open cycle (same as signalfd).  If "ufd" is -1,
s new file descriptor will be created, otherwise the existing "ufd" will be
re-programmed.

The "clockid" parameter is either CLOCK_MONOTONIC or CLOCK_REALTIME.  The time
specified in the "utmr->it_value" parameter is the expiry time for the timer.

If the TFD_TIMER_ABSTIME flag is set in "flags", this is an absolute time,
otherwise it's a relative time.

If the time specified in the "utmr->it_interval" is not zero (.tv_sec == 0,
tv_nsec == 0), this is the period at which the following ticks should be
generated.

The "utmr->it_interval" should be set to zero if only one tick is requested.
Setting the "utmr->it_value" to zero will disable the timer, or will create a
timerfd without the timer enabled.

The function returns the new (or same, in case "ufd" is a valid timerfd
descriptor) file, or -1 in case of error.

As stated before, the timerfd file descriptor supports poll(2), select(2) and
epoll(2).  When a timer event happened on the timerfd, a POLLIN mask will be
returned.

The read(2) call can be used, and it will return a u32 variable holding the
number of "ticks" that happened on the interface since the last call to
read(2).  The read(2) call supportes the O_NONBLOCK flag too, and EAGAIN will
be returned if no ticks happened.

A quick test program, shows timerfd working correctly on my amd64 box:

http://www.xmailserver.org/timerfd-test.c

[akpm@linux-foundation.org: add sys_timerfd to sys_ni.c]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Davide Libenzi
fba2afaaec signal/timer/event: signalfd core
This patch series implements the new signalfd() system call.

I took part of the original Linus code (and you know how badly it can be
broken :), and I added even more breakage ;) Signals are fetched from the same
signal queue used by the process, so signalfd will compete with standard
kernel delivery in dequeue_signal().  If you want to reliably fetch signals on
the signalfd file, you need to block them with sigprocmask(SIG_BLOCK).  This
seems to be working fine on my Dual Opteron machine.  I made a quick test
program for it:

http://www.xmailserver.org/signafd-test.c

The signalfd() system call implements signal delivery into a file descriptor
receiver.  The signalfd file descriptor if created with the following API:

int signalfd(int ufd, const sigset_t *mask, size_t masksize);

The "ufd" parameter allows to change an existing signalfd sigmask, w/out going
to close/create cycle (Linus idea).  Use "ufd" == -1 if you want a brand new
signalfd file.

The "mask" allows to specify the signal mask of signals that we are interested
in.  The "masksize" parameter is the size of "mask".

The signalfd fd supports the poll(2) and read(2) system calls.  The poll(2)
will return POLLIN when signals are available to be dequeued.  As a direct
consequence of supporting the Linux poll subsystem, the signalfd fd can use
used together with epoll(2) too.

The read(2) system call will return a "struct signalfd_siginfo" structure in
the userspace supplied buffer.  The return value is the number of bytes copied
in the supplied buffer, or -1 in case of error.  The read(2) call can also
return 0, in case the sighand structure to which the signalfd was attached,
has been orphaned.  The O_NONBLOCK flag is also supported, and read(2) will
return -EAGAIN in case no signal is available.

If the size of the buffer passed to read(2) is lower than sizeof(struct
signalfd_siginfo), -EINVAL is returned.  A read from the signalfd can also
return -ERESTARTSYS in case a signal hits the process.  The format of the
struct signalfd_siginfo is, and the valid fields depends of the (->code &
__SI_MASK) value, in the same way a struct siginfo would:

struct signalfd_siginfo {
	__u32 signo;	/* si_signo */
	__s32 err;	/* si_errno */
	__s32 code;	/* si_code */
	__u32 pid;	/* si_pid */
	__u32 uid;	/* si_uid */
	__s32 fd;	/* si_fd */
	__u32 tid;	/* si_fd */
	__u32 band;	/* si_band */
	__u32 overrun;	/* si_overrun */
	__u32 trapno;	/* si_trapno */
	__s32 status;	/* si_status */
	__s32 svint;	/* si_int */
	__u64 svptr;	/* si_ptr */
	__u64 utime;	/* si_utime */
	__u64 stime;	/* si_stime */
	__u64 addr;	/* si_addr */
};

[akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Stephen Rothwell
3fd5939798 [PATCH] Create compat_sys_migrate_pages
This is needed on bigendian 64bit architectures.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:59 -08:00
Randy Dunlap
39af114377 [PATCH] fix epoll_pwait when EPOLL=n
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7371

sys_epoll_pwait needs to be listed as a conditional (weak)
entry point for CONFIG_EPOLL=n.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-16 09:14:05 -07:00
David Howells
9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Christoph Lameter
1b2db9fb7a [PATCH] sys_move_pages: 32bit support (i386, x86_64)
sys_move_pages() support for 32bit (i386 plus x86_64 compat layer)

Add support for move_pages() on i386 and also add the compat functions
necessary to run 32 bit binaries on x86_64.

Add compat_sys_move_pages to the x86_64 32bit binary layer.  Note that it is
not up to date so I added the missing pieces.  Not sure if this is done the
right way.

[akpm@osdl.org: compile fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter
742755a1d8 [PATCH] page migration: sys_move_pages(): support moving of individual pages
move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.

long move_pages(pid, number_of_pages_to_move,
		addresses_of_pages[],
		nodes[] or NULL,
		status[],
		flags);

The addresses of pages is an array of void * pointing to the
pages to be moved.

The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.

The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.

Possible page states in status[]:

0..MAX_NUMNODES	The page is now on the indicated node.

-ENOENT		Page is not present

-EACCES		Page is mapped by multiple processes and can only
		be moved if MPOL_MF_MOVE_ALL is specified.

-EPERM		The page has been mlocked by a process/driver and
		cannot be moved.

-EBUSY		Page is busy and cannot be moved. Try again later.

-EFAULT		Invalid address (no VMA or zero page).

-ENOMEM		Unable to allocate memory on target node.

-EIO		Unable to write back page. The page must be written
		back in order to move it since the page is dirty and the
		filesystem does not provide a migration function that
		would allow the moving of dirty pages.

-EINVAL		A dirty page cannot be moved. The filesystem does not provide
		a migration function and has no ability to write back pages.

The flags parameter indicates what types of pages to move:

MPOL_MF_MOVE	Move pages that are only mapped by the process.

MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
		Requires sufficient capabilities.

Possible return codes from move_pages()

-ENOENT		No pages found that would require moving. All pages
		are either already on the target node, not present, had an
		invalid address or could not be moved because they were
		mapped by multiple processes.

-EINVAL		Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
		to migrate pages in a kernel thread.

-EPERM		MPOL_MF_MOVE_ALL specified without sufficient priviledges.
		or an attempt to move a process belonging to another user.

-EACCES		One of the target nodes is not allowed by the current cpuset.

-ENODEV		One of the target nodes is not online.

-ESRCH		Process does not exist.

-E2BIG		Too many pages to move.

-ENOMEM		Not enough memory to allocate control array.

-EFAULT		Parameters could not be accessed.

A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3

From: Christoph Lameter <clameter@sgi.com>

  Detailed results for sys_move_pages()

  Pass a pointer to an integer to get_new_page() that may be used to
  indicate where the completion status of a migration operation should be
  placed.  This allows sys_move_pags() to report back exactly what happened to
  each page.

  Wish there would be a better way to do this. Looks a bit hacky.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Hyok S. Choi
3016b42153 [PATCH] frv: define MMU mode specific syscalls as 'cond_syscall' and clean up unneeded macros
For some architectures, a few syscalls are not linked in noMMU mode.  In
that case, the MMU depending syscalls are needed to be defined as
'cond_syscall'.  For example, ARM architecture selectively links sys_mlock
by the mode configuration.

In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in
arch/frv/kernel/entry.S.  However these conditional macros are just
duplicates if they were defined as cond_syscall.  Compilation test is done
with FRV toolchains for both of MMU and noMMU mode.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:33 -07:00
Ingo Molnar
0771dfefc9 [PATCH] lightweight robust futexes: core
Add the core infrastructure for robust futexes: structure definitions, the new
syscalls and the do_exit() based cleanup mechanism.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:49 -08:00
Stephen Rothwell
7fd105e758 [PATCH] Fix compile for CONFIG_SYSVIPC=n or CONFIG_SYSCTL=n
The compat syscalls are added to sys_ni.c since they are not defined if the
above CONFIG options are off.  Also, nfs would not build with CONFIG_SYSCTL
off.

Noticed by Arthur Othieno.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 20:00:11 -08:00
Linus Torvalds
6150c32589 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2006-01-09 10:03:44 -08:00
Matt Mackall
64ca9004b8 [PATCH] Make vm86 support optional
This adds an option to remove vm86 support under CONFIG_EMBEDDED.  Saves
about 5k.

This version eliminates most of the #ifdefs of the previous version and
instead uses function stubs in vm86.h.  Also, release_vm86_irqs is moved
from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs
can live together.

$ size vmlinux-baseline vmlinux-novm86
   text    data     bss     dec     hex filename
2920821  523232  190652 3634705  377611 vmlinux-baseline
2916268  523100  190492 3629860  376324 vmlinux-novm86

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Matt Mackall
e585e47031 [PATCH] tiny: Make *[ug]id16 support optional
Configurable 16-bit UID and friends support

This allows turning off the legacy 16 bit UID interfaces on embedded platforms.

   text    data     bss     dec     hex filename
3330172  529036  190556 4049764  3dcb64 vmlinux-baseline
3328268  529040  190556 4047864  3dc3f8 vmlinux

From: Adrian Bunk <bunk@stusta.de>

    UID16 was accidentially disabled for !EMBEDDED.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Christoph Lameter
39743889aa [PATCH] Swap Migration V5: sys_migrate_pages interface
sys_migrate_pages implementation using swap based page migration

This is the original API proposed by Ray Bryant in his posts during the first
half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org.

The intent of sys_migrate is to migrate memory of a process.  A process may
have migrated to another node.  Memory was allocated optimally for the prior
context.  sys_migrate_pages allows to shift the memory to the new node.

sys_migrate_pages is also useful if the processes available memory nodes have
changed through cpuset operations to manually move the processes memory.  Paul
Jackson is working on an automated mechanism that will allow an automatic
migration if the cpuset of a process is changed.  However, a user may decide
to manually control the migration.

This implementation is put into the policy layer since it uses concepts and
functions that are also needed for mbind and friends.  The patch also provides
a do_migrate_pages function that may be useful for cpusets to automatically
move memory.  sys_migrate_pages does not modify policies in contrast to Ray's
implementation.

The current code here is based on the swap based page migration capability and
thus is not able to preserve the physical layout relative to it containing
nodeset (which may be a cpuset).  When direct page migration becomes available
then the implementation needs to be changed to do a isomorphic move of pages
between different nodesets.  The current implementation simply evicts all
pages in source nodeset that are not in the target nodeset.

Patch supports ia64, i386 and x86_64.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:42 -08:00
Arnd Bergmann
67207b9664 [PATCH] spufs: The SPU file system, base
This is the current version of the spu file system, used
for driving SPEs on the Cell Broadband Engine.

This release is almost identical to the version for the
2.6.14 kernel posted earlier, which is available as part
of the Cell BE Linux distribution from
http://www.bsc.es/projects/deepcomputing/linuxoncell/.

The first patch provides all the interfaces for running
spu application, but does not have any support for
debugging SPU tasks or for scheduling. Both these
functionalities are added in the subsequent patches.

See Documentation/filesystems/spufs.txt on how to use
spufs.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:12 +11:00
Ingo Molnar
6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Robert Love
0eeca28300 [PATCH] inotify
inotify is intended to correct the deficiencies of dnotify, particularly
its inability to scale and its terrible user interface:

        * dnotify requires the opening of one fd per each directory
          that you intend to watch. This quickly results in too many
          open files and pins removable media, preventing unmount.
        * dnotify is directory-based. You only learn about changes to
          directories. Sure, a change to a file in a directory affects
          the directory, but you are then forced to keep a cache of
          stat structures.
        * dnotify's interface to user-space is awful.  Signals?

inotify provides a more usable, simple, powerful solution to file change
notification:

        * inotify's interface is a system call that returns a fd, not SIGIO.
	  You get a single fd, which is select()-able.
        * inotify has an event that says "the filesystem that the item
          you were watching is on was unmounted."
        * inotify can watch directories or files.

Inotify is currently used by Beagle (a desktop search infrastructure),
Gamin (a FAM replacement), and other projects.

See Documentation/filesystems/inotify.txt.

Signed-off-by: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 20:38:38 -07:00
Eric W. Biederman
dc009d9243 [PATCH] kexec: add kexec syscalls
This patch introduces the architecture independent implementation the
sys_kexec_load, the compat_sys_kexec_load system calls.

Kexec on panic support has been integrated into the core patch and is
relatively clean.

In addition the hopefully architecture independent option
crashkernel=size@location has been docuemented.  It's purpose is to reserve
space for the panic kernel to live, and where no DMA transfer will ever be
setup to access.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Martin Hicks
753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Stephen Rothwell
7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00