A number of fixes have accumulated, but they are largely for
harmless issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for
different firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect
data in DT nodes
- Three updates to the MAINTAINERS file, including Florian
Fainelli taking over BCM283x/BCM2711 (Raspberry Pi)
from Nicolas Saenz Julienne
-----BEGIN PGP SIGNATURE-----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=Js9H
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
please pull the following:
- Stefan fixes the Raspberry Pi 400 GPIO expander line names to match
that of the downstream Raspberry Pi Linux tree
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmKwqTgACgkQh9CWnEQH
BwTZGQ//dWucnJtFfJ+JBG5avZ8cpHieqIhHpSVd0P6MljnHDcBcesOczL0euN/j
1EMVwC6Q/2yAa6L7JLB8iGAVH3yR4ly95SHBtCJ1of5hXv2dOtBqTgyoi5xsYnlh
u1t5DufNoTBFiER8D6aCQKGXXlyG+j9xH0ddu3TY+qcNfcXYDbq5l01IsF922lED
3xZXz6K7p19/f9WJrcmdOEv4dKu+Pa6ctRYsrm1aaSRa36NXPDT2CH5qm4eh5+VO
W8ub+roB3fLjIHY7Dx5Cs3YGCq7DbBvUQ4G1Uty4J/8KkOhPSIhAxxbVrYIBltby
ZrouRUVdsdoec5aG0usxYeWK2eITNBHGvEPKzEdx2nZ370ir55UodWfq1u+0c03R
zY1TI0BSThkhVvpAxCyt4qUPqHf4rgyxP5+FA8VMumnIefD7uQDIKhdkWi5PrwwA
GlSi6P1fhWnVRjzGRSPvVm1sS92Y048/Aay2CKlgSINuCC0rNMblGFej14r1mUGU
fGjR29IXTPMnB+gHhUgRa6q6l+cbpnxaUQq825+VC9fdFZgifu4i38lTn5m+BDIE
heygDDkOou+G9As6Yvj5l/PO+3rQ0MmH7L50ni6QzEoat7loABPDf87cJZvW0+tb
Ug308VwTYCnVHJ+kr+xbMwuQWchklSZkuKt+AsMr+FS+uC8X/4g=
=v1YD
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Ca7Z
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-SoC Device Tree fixes for 5.19,
please pull the following:
- Stefan fixes the Raspberry Pi 400 GPIO expander line names to match
that of the downstream Raspberry Pi Linux tree
* tag 'arm-soc/for-5.19/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
Link: https://lore.kernel.org/r/20220620170745.2485199-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPIO expander line names has been fixed in the vendor tree last year,
so upstream these changes.
Fixes: 1c701accec ("ARM: dts: Add Raspberry Pi 400 support")
Reported-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Latest drivers version requires phy-mode to be set. Otherwise we will
use "NA" mode and the switch driver will invalidate this port mode.
Fixes: 65ac79e181 ("net: dsa: microchip: add the phylink get_caps")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding a "secure" version of STM32 boards (DK1/DK2/ED1/EV1), SCMI (clock/
reset) protocol and OP-TEE node have been added in SoC dtsi file
(stm32mp151.dtsi). They have been added with a status disabled in order to
keep our legacy unchanged. It is actually not enough to keep our legacy
unchanged.
First, just a reminder about our use case: TF-A (BL2) loads and starts
OP-TEE, then loads and runs U-Boot. U-Boot code checks if an OP-TEE is
running, if yes it searches in Kernel device tree if an OP-TEE node is
present:
-If the OP-TEE node is not present then U-Boot copies OP-TEE node and its
reserved memory region from U-Boot device tree to the kernel device tree.
-If the OP-TEE node is present then it does nothing (this OP-TEE node will
be used by Linux). So U-Boot lets the kernel device tree unchanged thinking
it is correct for an OP-TEE usage. It is the case for our legacy boards,
the OP-TEE node is present (although disabled) but the reserved memory
region is not declared. As no memory region has been reserved for OP-TEE,
the end of DDR is seen by the kernel as free and then used for CMA. But as
OP-TEE is running, this end of DDR is already used by OP-TEE. So as soon as
kernel tries to access to the CMA region OP-TEE raises an error.
To fix it, all OP-TEE node and SCMI is moved in a dedicated file.
Fixes: 40b4157dbd ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220613071920.5463-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The commit feedaacdad ("Input: atmel_mxt_ts - fix up inverted RESET
handler") requires the reset GPIO to have GPIO_ACTIVE_LOW.
Fixes: 1524b27c94 ("ARM: dts: imx6dl-colibri: Move common nodes to SoM dtsi")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Contrary to what was believed at the time, the ramp delay of 150us is not
plenty for the PU LDO with the default step time of 512 pulses of the 24MHz
clock. Measurements have shown that after enabling the LDO the voltage on
VDDPU_CAP jumps to ~750mV in the first step and after that the regulator
executes the normal ramp up as defined by the step size control.
This means it takes the regulator between 360us and 370us to ramp up to
the nominal 1.15V voltage for this power domain. With the old setting of
the ramp delay the power up of the PU GPC domain would happen in the middle
of the regulator ramp with the voltage being at around 900mV. Apparently
this was enough for most units to properly power up the peripherals in the
domain and execute the reset. Some units however, fail to power up properly,
especially when the chip is at a low temperature. In that case any access
to the GPU registers would yield an incorrect result with no way to recover
from this situation.
Change the ramp delay to 380us to cover the measured ramp up time with a
bit of additional slack.
Fixes: 40130d327f ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the power domain to its actual user. This keeps the power domain
enabled even when the USB host is runtime suspended. This is necessary
to detect any downstream events, like device attach.
Fixes: 02f8eb40ef ("ARM: dts: imx7s: Add power domain for imx7d HSIC")
Suggested-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for the
USB core, but there are the usual "hot spots" of development activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes. It seems this driver will never
be finished given that the IP core is showing up in zillions
of new devices and each implementation decides to do something
different with it...
- uvc gadget driver updates as more devices start to use and
rely on this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnZGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQhwCeLVANsQjBcL4ys4skl+1In17y28gAn3rEZ7rQ
Yv4uP9zadUqg3Cx0vjgf
=3s5s
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
Add clocks and clock-names to the rk3228 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks and clock-names to the rk3036 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330114847.18633-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks property to rk3066a/rk3188 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329111323.3569-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks property to rk3288 cru node to fix warnings like:
'clocks' is a dependency of 'assigned-clocks'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220329113657.4567-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f342 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").
As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
The node names should be generic, so rename it to "dma-controller".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clocks and clock-names to the rv1108 cru node, because
the device has to have at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220330131608.30040-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The '#dma-channels' property was deprecated in favor of one defined by
generic dma-common DT bindings. Add new property while keeping old one
for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The '#dma-channels' and '#dma-requests' properties were deprecated in
favor of these defined by generic dma-common DT bindings. Add new
properties while keeping old ones for backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patch series from Nick Hawkins:
"The GXP is the HPE BMC SoC that is used in the majority of HPE current
generation servers. Traditionally the asic will last multiple
generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many
BMC features at HPE. It supports ARMv7 architecture based on the Cortex
A9 core. It is capable of using an AXI bus to which a memory controller
is attached. It has multiple SPI interfaces to connect boot flash and
BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has
multiple i2c engines to drive connectivity with a host infrastructure.
The initial patches enable the watchdog and timer enabling the host to
be able to boot."
* hpe/gxp-soc:
MAINTAINERS: Introduce HPE GXP Architecture
ARM: dts: Introduce HPE GXP Device tree
dt-bindings: arm: hpe: add GXP Support
dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog
clocksource/drivers/timer-gxp: Add HPE GXP Timer
watchdog: hpe-wdt: Introduce HPE GXP Watchdog
ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH
ARM: hpe: Introduce the HPE GXP architecture
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are 40 branches this time, adding a lot of new hardware
support, and cleanups. Krzysztof Kozlowski continues his treewide
cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L
general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for designing
custom SoCs, the support for now is for the Fixed Virtual Platform
emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used
in upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly
for 32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based
IOT board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch,
a Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568
-----BEGIN PGP SIGNATURE-----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=LsM7
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
Enable the GFX device with a framebuffer memory region.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220302024930.18758-3-tommy_huang@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220302024930.18758-2-tommy_huang@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The IBM Everest and Rainier systems have a GPIO line that goes to the
power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync
input history.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20220421213638.1151193-1-bjwyman@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for Nuvia DC-SCM BMC which is
equipped with Aspeed AST2600 BMC SoC.
Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
set number of sample averaging to 128 for both PWR_AVG and VI_AVG
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add eeprom (24c26) on each sled for storing sled fru information.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41.
P0: SLEDX_SWD_MUX
P1: SLEDX_XRES_SWD_N
P2: SLEDX_CLKREQ_N
P3: SLEDX_PCIE_PWR_EN
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Update GPIO line names based on DVT schematic
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable mdio0 bus based on DVT schematic.
TODO: Add Marvell 88E6191 Switch
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Due to DVT schematic has stable spi signal, switch back to aspeed-smc
driver for improving performance.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable ehci0 node for USB2 host feature
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC
controller to ensure the clock frequency is calculated correctly.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
All these controllers support at least Dual SPI. Update the DTs.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300,
add an entry for it next to the original.
As Russell King pointed out, additional phy nodes cause warnings like:
mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing
To avoid this the new node has its status set to disabled. U-Boot will
be modified to enable the appropriate phy node after probing.
The existing ar8035 nodes have to stay enabled by default to avoid
breaking existing systems when they update Linux only.
Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SAMA7G5-EK has 4 PDM microphones connected to PDMC0. PDMC0 pinmux is in
conflict with gmac1, gmac1 being enabled by default.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220307122202.2251639-6-codrin.ciubotariu@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Microchip's SAMA7G5 embeds two PDMCs. The PDMCs can be used to connect 2x4
PDM microphones.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220307122202.2251639-5-codrin.ciubotariu@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
As the DT specification recommends, the node names should be of a
generic nature. Thus, the most appropriate generic node name for
the at91 rtt IPs is the "rtc" node name.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220304161159.147784-3-sergiu.moga@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add the required 'atmel,rtt-rtc-time-reg' property to the "rtt" nodes
of the board files that were missing it.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/all/20220304161159.147784-2-sergiu.moga@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-----BEGIN PGP SIGNATURE-----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=9HxU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iodE
-----END PGP SIGNATURE-----
Merge tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Delete no longer needed properties of MediaTek Larbs for MT2701.
* tag 'v5.18-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mediatek: Get rid of mediatek, larb for MM nodes
Link: https://lore.kernel.org/r/b4383f23-0adc-b9de-a1d9-abd1c2f82b27@gmail.com
This concludes a cleanup that was started back in 2019, with an
incompatible DT binding change. Kernels before 5.18 can no longer
use the updated dtb from 5.19, and the drivers no longer parse the
old properties, which breaks compatibility with older dtb files.
Link: https://lore.kernel.org/lkml/1546318276-18993-2-git-send-email-yong.wu@mediatek.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds