Commit graph

7 commits

Author SHA1 Message Date
Sébastien Szymanski
b22c2ac4c0 ARM: dts: imx6qdl-apf6: fix WiFi
These changes make the WiFi on the APF6 board work again.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 14:48:43 +08:00
Sébastien Szymanski
827f16f7e9 ARM: dts: imx6qdl-apf6: add flow control to uart2
RTS/CTS lines are wired to the Bluetooth chip so add uart-has-rtscts
property to uart2.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 14:48:40 +08:00
Sébastien Szymanski
c916c944bc ARM: dts: imx6qdl-apf6: add phy to fec
Add the mdio bus and the phy to the fec-node.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 14:48:38 +08:00
Sébastien Szymanski
0f64825965 ARM: dts: imx6qdl-{apf6, apf6dev}: remove container node around pinctrl nodes
Remove the function node around the pinctrl nodes that was obsoleted
by commit 5fcdf6a7ed ("pinctrl: imx: Allow parsing DT without
function nodes").

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 14:48:33 +08:00
Sébastien Szymanski
3307505f8b ARM: dts: imx6qdl-{apf6, apf6dev}: switch boards to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28 14:48:19 +08:00
Fabio Estevam
0672d22a19 ARM: dts: imx: Fix the AR803X phy-mode
Commit 6d4cd041f0 ("net: phy: at803x: disable delay only for RGMII mode")
exposed an issue on imx DTS files using AR8031/AR8035 PHYs.

The end result is that the boards can no longer obtain an IP address
via UDHCP, for example.

Quoting Andrew Lunn:

"The problem here is, all the DTs were broken since day 0. However,
because the PHY driver was also broken, nobody noticed and it
worked. Now that the PHY driver has been fixed, all the bugs in the
DTs now become an issue"

To fix this problem, the phy-mode property needs to be "rgmii-id",  which
has the following meaning as per
Documentation/devicetree/bindings/net/ethernet.txt:

"RGMII with internal RX and TX delays provided by the PHY, the MAC should
not add the RX or TX delays in this case)"

Tested on imx6-sabresd, imx6sx-sdb and imx7d-pico boards with
successfully restored networking.

Based on the initial submission from Steve Twiss for the
imx6qdl-sabresd.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Adam Thomson <Adam.Thomson@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11 10:57:56 +08:00
Sébastien Szymanski
673254d5b3 ARM: dts: Armadeus Systems APF6 family support (i.MX6)
Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and
the Armadeus Systems APF6Dev carrier board.

For more details see:
http://www.armadeus.com/english/products-processor_boards-apf6.html
http://www.armadeus.com/english/products-development_boards-apf6_dev.html

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 15:04:00 +08:00