The expression for setting the size of the allocated bulk TX buffer
(`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`,
which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it.
Fixes: a23461c474 ("comedi: vmk80xx: fix transfer-buffer overflow")
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 4.9+
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following coccicheck warning:
drivers/comedi/drivers.c:857:12-13: WARNING opportunity for min().
min() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220513071608.49047-1-guozhengkui@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The family and device comparisons were using memcmp(), but this could
lead to Out-of-bounds reads when the length was larger than the
buffers being compared. Since these appear to always be NUL-terminated
strings, just use strcmp() instead.
This was found with Clang under LTO:
[ 92.405851][ T1] kernel BUG at lib/string_helpers.c:980!
...
[ 92.409141][ T1] RIP: 0010:fortify_panic (fbdev.c:?)
...
[ 92.410056][ T1] ni_assign_device_routes (fbdev.c:?)
[ 92.410056][ T1] ? unittest_enter (fbdev.c:?)
[ 92.410056][ T1] ni_routes_unittest (ni_routes_test.c:?)
[ 92.410056][ T1] ? unittest_enter (fbdev.c:?)
[ 92.410056][ T1] __initstub__kmod_ni_routes_test__505_604_ni_routes_unittest6 (fbdev.c:?)
[ 92.410056][ T1] do_one_initcall (fbdev.c:?)
Link: https://lore.kernel.org/lkml/20220210072821.GD4074@xsang-OptiPlex-9020
Fixes: 4bb90c87ab ("staging: comedi: add interface to ni routing table information")
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220215171017.1247291-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable buffer_config is being assigned a value that is never read, it
is being re-assigned later on. The assignment is redundant and can be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/comedi/drivers/das16.c:964:45: warning: using sizeof on a flexible structure
drivers/comedi/drivers/das16.c:998:45: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20220125232525.GA80228@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a half a dozen or so Comedi device drivers that use the
"comedi_isadma" module to add ISA DMA support. The macros and
declarations to use that module are in the "comedi_isadma.h" header file
in the comedi "drivers" directory. Move it into
"include/linux/comedi/".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-6-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a couple of dozen or so Comedi device drivers that use
the "comedi_8254" module to add timers based on the venerable 8254
Programmable Interval Timer chip. The macros and declarations to use
that module are in the "comedi_8254.h" header file in the comedi
"drivers" directory. Move it into "include/linux/comedi/".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the header files in "drivers/comedi/drivers/" are common enough
to be useful to out-of-tree comedi driver modules. Using them for
out-of-tree module builds is hampered by the headers being outside the
"include/" directory so it is desirable to move them.
There are about a couple of dozen Comedi device drivers that use the
"comedi_8255" module to add digital I/O subdevices based on the
venerable 8255 Programmable Peripheral Interface chip. The macros and
declarations to use that module are in the "8255.h" header file in the
comedi "drivers" directory. Move it into "include/linux/comedi/" and
rename it to "comedi_8255.h" for naming consistency reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building of the tools for converting the NI routing information between
CSV files (for maintenance) and C files (for building) was broken by the
move of the main COMEDI header files to "include/uapi/linux/" and
"include/linux/". (These tools are not built as part of the normal
kernel build process.) Fix it in the Makefile.
A slight niggle is that `#include <linux/comedi.h>` needs to work when
compiling the `convert_c_to_py` program, but it cannot use a `-I` option
referring to the "uapi" include directory because that interferes with
inclusion of other system headers. So it uses `-I.` and makes a local
copy (actually a symbolic link) as "./linux/comedi.h".
Also remove some unneeded cruft such as the `-D"BIT(x)=(1<<(x))"`
preprocessor flag.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the main COMEDI driver headers out of "drivers/comedi/" into new
directory "include/linux/comedi/". These are "comedidev.h",
"comedilib.h", "comedi_pci.h", "comedi_pcmcia.h", and "comedi_usb.h".
Additionally, move the user-space API header "comedi.h" into
"include/uapi/linux/" and add "WITH Linux-syscall-note" to its
SPDX-License-Identifier.
Update the "COMEDI DRIVERS" section of the MAINTAINERS file to account
for these changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB transfer buffers are typically mapped for DMA and must not be
allocated on the stack or transfers will fail.
Allocate proper transfer buffers in the various command helpers and
return an error on short transfers instead of acting on random stack
data.
Note that this also fixes a stack info leak on systems where DMA is not
used as 32 bytes are always sent to the device regardless of how short
the command is.
Fixes: 63274cd7d3 ("Staging: comedi: add usb dt9812 driver")
Cc: stable@vger.kernel.org # 2.6.29
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses endpoint-sized USB transfer buffers but had no sanity
checks on the sizes. This can lead to zero-size-pointer dereferences or
overflowed transfer buffers in ni6501_port_command() and
ni6501_counter_command() if a (malicious) device has smaller max-packet
sizes than expected (or when doing descriptor fuzz testing).
Add the missing sanity checks to probe().
Fixes: a03bb00e50 ("staging: comedi: add NI USB-6501 support")
Cc: stable@vger.kernel.org # 3.18
Cc: Luca Ellero <luca.ellero@brickedbrain.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.
Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.
Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.
Fixes: 985cafccbf ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b377 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is using endpoint-sized buffers but must not assume that the
tx and rx buffers are of equal size or a malicious device could overflow
the slab-allocated receive buffer when doing bulk transfers.
Fixes: 985cafccbf ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.
Commit e1f13c879a ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.
Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.
The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.
Fixes: 985cafccbf ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST`
ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to
temporarily hold an array of `struct comedi_insn` converted from the
32-bit version in user space. This memory is only being freed if there
is a fault while filling the array, otherwise it is leaked.
Add a call to `kfree()` to fix the leak.
Fixes: b8d47d8813 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Cc: <stable@vger.kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has the
full details.
For the staging side, we moved a few drivers out of staging, and deleted
the kpc2000 drivers as the original developer asked us to because no one
was working on them anymore.
Also in here are loads of coding style cleanups due to different intern
projects focusing on the staging tree to try to get experience doing
kernel development.
All of these have been in the linux-next tree for a while with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM50w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZ4wCeK/JreZijlAy0O5Gq1equvRx1jJoAoJmmt7UY
bx6qpcmUM7c53cMXr/kh
=6suo
-----END PGP SIGNATURE-----
Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has
the full details.
For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.
Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Function parameter or member 'dma_chan1' not described in 'comedi_isadma_alloc'
drivers/staging/comedi/drivers/comedi_isadma.c:157: warning: Excess function parameter 'dma_chan' description in 'comedi_isadma_alloc'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_routes.c:249: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'routes' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'source' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'src_sel_reg_value' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'dest' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'tables' not described in 'ni_find_route_source'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: "Spencer E. Olson" <olsonse@umich.edu>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'counter_dev' not described in 'ni_tio_get_routing'
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: Function parameter or member 'dest' not described in 'ni_tio_get_routing'
drivers/staging/comedi/drivers/ni_tio.c:1515: warning: expecting prototype for Retrieves the register value of the current source of the output selector for(). Prototype was for ni_tio_get_routing() instead
drivers/staging/comedi/drivers/ni_tio.c:1544: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_tio.c:1584: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: "J.P. Mellor" <jpmellor@rose-hulman.edu>
Cc: Herman.Bruyninckx@mech.kuleuven.ac.be
Cc: Wim.Meeussen@mech.kuleuven.ac.be
Cc: Klaas.Gadeyne@mech.kuleuven.ac.be
Cc: Comedi <comedi@comedi.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/comedi_8254.c:561: warning: Function parameter or member 'i8254' not described in 'comedi_8254_subdevice_init'
drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Function parameter or member 'iobase' not described in 'comedi_8254_init'
drivers/staging/comedi/drivers/comedi_8254.c:620: warning: Excess function parameter 'mmio' description in 'comedi_8254_init'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "David A. Schleef" <ds@schleef.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable ‘min_full_scale’ and function 'get_min_full_scales' are
not used, So delete them.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210514085214.53941-1-cuibixuan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fa60ce2cb4 ("treewide: remove editor modelines and cruft")
is different from what I submitted.
My original patch [1] did treewide cleanups including the comedi driver.
Unfortunately, commit 8ffdff6a8c ("staging: comedi: move out of staging
directory") moved drivers/staging/comedi/ to drivers/comedi/ before my
patch landed on Linus' tree from akpm tree.
If Andrew Morton had used Git, 'git merge' would have resolved such file
moves properly without any manual intervention.
Patches in akpm tree often get broken in his quilt workflows, and then
people end up with sending fixup patches.
[1] https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210510063450.412055-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi code came into the kernel back in 2008, but traces its
lifetime to much much earlier. It's been polished and buffed and
there's really nothing preventing it from being part of the "real"
portion of the kernel.
So move it to drivers/comedi/ as it belongs there.
Many thanks to the hundreds of developers who did the work to make this
happen.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
