Commit graph

16 commits

Author SHA1 Message Date
Hongbo Zhang
ea2be6f210 ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
This patch exports the thermistor resistance-to-temperature tables, so
that the hwmon driver can access them, and also adds the corresponding
table size variables.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:38:10 -07:00
Hongbo Zhang
2c89940786 ab8500_{bmdata,fg}: Add const attributes to some data arrays
This patch adds const attributes to AB8500 power and temperature related
read-only data arrays.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:34:36 -07:00
Hongbo Zhang
6c1f8e02cc ab8500_bmdata: Eliminate CamelCase warning of some variables
Some AB8500 power related variable names don't comply with kernel coding
rules, any new patch using these variables will result in CamelCase
warnings from checkpatch.pl, this patch re-name these variables.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:33:34 -07:00
Lee Jones
861a30da53 ab8500-bm: Add support for the new ab8540 platform
Provide AB8540 platform specific information required to run the
Battery Management subsystem on AB8540 based devices. For this to
happen we see the introduction of separate platform specific data
structures and a means in which to process them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:48 +08:00
Lee Jones
93ff722e88 ab8500-fg: Add power cut feature for ab8505 and ab8540
Add support for a power cut feature which allows user to
configure when ab8505 and ab8540 based platforms should shut
down system due to low battery.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:36 +08:00
Linus Torvalds
5a1203914a - Four new drivers:
o goldfish_battery:
     This is Android Emulator battery driver. Originally from Google, but
     Intel folks reshaped it for mainline;
 
   o pm2301_charger:
     A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500
     battery management core;
 
   o qnap-poweroff:
     The driver adds poweroff functionality for QNAP NAS boxes;
 
   o restart-poweroff:
     A generic driver that implements 'power off by restarting'. The actual
     poweroff functionality is implemented through a bootloader, so Linux'
     task is just to restart the box. The driver is useful on Buffalo
     Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on
     submitting the driver (as well as qnap-poweroff above).
 
 - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing
   internal ST-Ericsson development tree with the mainline. Lee Jones @
   Linaro worked on compilation and reshaping these series;
 
 - New health properties for the power supplies: "Watchdog timer expire"
   and "Safety timer expire";
 
 - As usual, a bunch of fixes/cleanups here and there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIww1AAoJEGgI9fZJve1bJ7sP/1hR8SYQZ/k0ayxA/kIxNEDA
 Qa2sAcdP5pa4F/A2Wi5MTrckSHuLlRRigWRCPM09emVOvt6g2MdM3Eq6ShuYb2p0
 g2bX0F9KBEa9gdiJC1wNVe9DilXbrJsk86V5E+ZkuVnNzM3S1FA1sPWGhdH66YVq
 9IKxm2XntyXFpuvhSYE01KQoFY+Crv1NEGXoIR7tB6Q1KOf3XswnsFwdKJ95IO5r
 8f/lVYRAYUfeplhrYd3eJTtb/GHhK7CutFV/E6kWlumGCWNVH2xt+dTlAmTUdQvO
 jKe9R5iq5eXFTQmN8QZDH7QdXO1DdmJZ9F112hIAud/93bmNrnc0WqMKM7CFHkfH
 S6ptGgeIdpGEM1KMgzKTNrQeNIYsVNtqbEiIiodR8S4e0cX2pb2n5IfzmELIVc0n
 QMZylORpGaH1lBxTE2RoT4raGeWF5jH0t0b0YRqccRPvQ4VjCJslDOq9IOETUe+/
 YxWpELJigW7FGLMfx0SB2/3s1P4EUaufWvHANCVaPuBsOZga854R4dzms4hKyKsL
 JQg+OKp/Bt78yAj/8/n0FWdxgldp/NjF4485ITQ1eOZyg8VSeIp93Lk6lgSTukux
 R1xLruxfPgdynpmYFCGF99JG2G8RmRuJFSTf8JttvyztkAxQw6zBtdmdiPk38wst
 qpUxdPpNDIvt65Ix7x+D
 =955B
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..
2013-02-20 10:19:07 -08:00
Marcus Cooper
ea40240178 ab8500_bm: Recharge condition not optimal for battery
Today the battery recharge is determined with a voltage threshold. This
voltage threshold is only valid when the battery is relaxed. In charging
algorithm the voltage read is the loaded battery voltage and no
compensation is done to get the relaxed voltage. When maintenance
charging is not selected, this makes the recharging condition to almost
immediately activate when there is a discharge present on the battery.

Depending on which vendor the battery comes from this behavior can wear
out the battery much faster than normal.

The fuelgauge driver is responsible to monitor the actual battery
capacity and is able to estimate the remaining capacity. It is better to
use the remaining capacity as a limit to determine when battery should
be recharged.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:43:46 -08:00
Greg Kroah-Hartman
6d2cea4fca Drivers: power: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:14 -08:00
Lee Jones
215cf5c93d ab8500_bm: Make the battery Device Tree node reference less cryptic
Let's rename the Device Tree node which contains information about
an attached battery to something more easily readable.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:55 +00:00
Lee Jones
23a04f9f40 ab8500_bm: Always send platform specific battery information via pdata
Currently the AB8500 battery management subsystem receives platform
specific information via two different means depending on how the
platform is booted. If DT is not enabled, a reference to a *_bm_data
data structure containing each platform specific attribute is passed
though platform_data. However, if DT is enabled, then platform_data
is empty and the reference is gained though a DT specific probe
function. There are two issues here 1) the same reference is
being collected each time and 2) the DT way doesn't allow any
provisions to select different platform specific attributes, which
kind of defeats the object.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones
b0284de05e ab8500_bm: Rename battery management platform data to something more logical
The platform specific battery management configuration data structure
is currently called 'bat' short for 'battery'; however, it contains
information for all components of the battery management group, rather
than information pertaining to the battery itself - there are other
structures for that. So, in keeping with its structure namesake
'abx500_bm_data', we rename it to 'bm' here. Using similar logic,
we're also renaming 'bmdevs_of_probe' to the more device specific
'ab8500_bm_of_probe'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Lee Jones
8e3a71e56c ab8500-bmdata: Re-jiggle bmdevs_of_probe to be more succinct
We can actually write bmdevs_of_probe to be easier to follow, use
less lines of code and we can even render a variable unused so
that we can remove it completely.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Lee Jones
43dc4470e3 ab8500_btemp: Fix crazy tabbing implementation
Simple patch to rectify incorrect tabbing. Also adds some
coding style clean-ups to make it easier to read.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:52 +00:00
Rajanikanth H.V
f5695a3983 ab8500: remove explicit handling of battery type
property, battery-type shall be one of supported technology type
instead blank
- refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
	for the list supported types
- this patch appends to ab8500 bm devs DT binding patch set
	ref: commit-id e0f1abeba5
		git://git.infradead.org/battery-2.6.git
- promote ab8500_fg probe to happen before ab8500_btemp probe as
	btemp driver depends on fuelgauge list,
	ref: ab8500_fg_get(...)

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
2012-12-11 08:43:51 +00:00
Rajanikanth H.V
bd9e8ab2d5 ab8500: Add devicetree support for btemp
This patch adds device tree support for battery-temperature-monitor driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:14 -08:00
Rajanikanth H.V
e0f1abeba5 ab8500: Add devicetree support for fuelgauge
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
  Note: of_probe() routine for battery managed devices is made
  common across all bm drivers.
- test status:
  - interrupt numbers assigned differs between legacy and FDT mode.

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:04 -08:00