Move bi_size and bi_sectors into the non-varint portion of the inode, so
that the write path can update them without going through the relatively
expensive unpack/pack operations.
Other changes:
- Add a field for the offset of the varint section, so we can add new
non-varint fields without needing a new inode type, like alloc_v3
- Move bi_mode into the flags field, so that the varint section can be
u64 aligned
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_gc may require snapshots to be started - the repair path when
checking the reflink btree may do updates to the extents btree.
This moves bch2_fs_initialize_subvolumes() and bch2_fs_snapshots_start()
to before bch2_gc() - since we haven't gone RW yet, the updates in
bch2_fs_initialize_subvolumes() are done via the journal replay keys
list, so it's fine to do this before bch2_gc().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds backpointers: we now have a reverse index from device
and offset on that device (specifically, offset within a bucket) back to
btree nodes and (non cached) data extents.
The first 40 backpointers within a bucket are stored in the alloc key;
after that backpointers spill over to the next backpointers btree. This
is to help avoid performance regressions from additional btree updates
on large streaming workloads.
This patch adds all the code for creating, checking and repairing
backpointers. The next patch in the series is going to use backpointers
for copygc - finally getting rid of the need to scan all extents to do
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's possible to do btree updates before going RW by adding them to the
list of updates for journal replay to do, but this is limited by what
fits in RAM. This patch switches the second alloc info phase to run
after going RW - btree_gc has already ensured the alloc btree itself is
correct - and tweaks the allocation path to deal with the potential
small inconsistencies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the distant past, it wasn't possible to start copygc until after
journal replay had finished. Now, the btree iterator code overlays keys
from the journal, so there's no reason not to start it earlier - and it
solves a rare deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch
- Adds a mechanism for queuing up journal entries prior to the journal
being started, which will be used for early journal log messages
- Adds bch2_fs_log_msg() and improves bch2_trans_log_msg(), which now
take format strings. bch2_fs_log_msg() can be used before or after
the journal has been started, and will use the appropriate mechanism.
- Deletes the now obsolete bch2_journal_log_msg()
- And adds more log messages to the recovery path - messages for
journal/filesystem started, journal entries being blacklisted, and
journal replay starting/finishing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If it so happens that we crash while dirty, meaning we don't have the
superblock clean section, and we erroneously mark a journal entry we
wrote as blacklisted, we won't be able to recover.
This patch fixes this by adding a fallback: if we've got no superblock
clean section, and no non-ignored journal entries, we try the most
recent ignored journal entry.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_journal_keys_peek_upto() was comparing against btree_id & level
incorrectly - fix this by using __journal_key_cmp().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This tweaks the recovery and journal paths so that we don't error out
before we need to: the list_journal command should work, even if we
wouldn't be able to replay successfully.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Marking a non-static function as inline doesn't actually work and is
now causing problems - drop that
- Introduce BCACHEFS_LOG_PREFIX for when we want to prefix log messages
with bcachefs (filesystem name)
- Userspace doesn't have real percpu variables (maybe we can get this
fixed someday), put an #ifdef around bch2_disk_reservation_add()
fastpath
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- In the btree iterator code that overlays keys from the journal, we
were incorrectly specifying level=0 instead of the btree_path's
current level in a few places
- When we didn't do journal replay, we shouldn't free the journal keys:
this fixes cmd_list and cmd_dump, which run in norecovery mode
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This removes an optimization that didn't actually save us any memory,
due to alignment, but did make the code more complicated than it needed
to be. We were also seeing a bug where journal_seq_base wasn't getting
correctly initailized, so hopefully it'll fix that too.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can rebuild alloc info if these btree roots are missing - no need to
bail out and say the filesystem is unrecoverable
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck doesn't want to run while we're cleaning up deleted snapshots - if
that work needs to be done, we want it to have finished before fsck
runs, otherwise fsck will get confused when it finds multiple keys in
the same snapshot ID equivalence class (i.e. the mechanism that
snapshot deletion uses for cleaning up redundant keys).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where btree_and_journal_iter would return the same key
twice - after deleting it (perhaps because it was present in both the
btree and the journal?)
This reworks btree_and_journal_iter to track the current position, much
like btree_paths, which makes the logic considerably simpler and more
robust.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
cmd_list_journal wasn't correctly listing the most recent journal
entries as blacklisted - because in the recovery path when just reading
the journal, we were failing to add those to the blacklist table.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, on every btree_iter_peek() operation we were searching the
journal keys, doing a full binary search - which was slow.
This patch fixes that by saving our position in the journal keys, so
that we only do a full binary search when moving our position backwards
or a large jump forwards.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Drop old unneeded parameter for whether we're in initial GC - which
was from when btree updates had to be done differently before we
went RW.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
journal_iters_fix() was incorrectly rewinding iterators past keys they
had already returned, leading to those keys being double counted in the
bch2_gc() path - oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
btree updates before going RW are expensive if they're in random order,
since they use the list of keys for journal replay to insert, which is
just a gap buffer.
This patch improves the bucket invalidate path so that if
bch2_check_lrus() hasn't finished it only prints warnings instead of
doing an emergency shutdown, which means we can now set BCH_FS_MAY_GO_RW
before bch2_check_lrus().
Also, the filesystem state bits are reorganized a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This option was useful when the replicas mechism was new and still being
debugged, but hasn't been used in ages - let's delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
In journal replay, we weren't immediately dropping journal pins when we
start doing updates that ewern't from journal replay - leading to
journal reclaim getting stuck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When many journal replay keys have been overwritten,
bch2_journal_keys_peek() was taking excessively long to scan before it
found a key to return.
Fix this by introducing bch2_journal_keys_peek_upto() which takes a
parameter for the end of the range we want, so that we can terminate the
search much sooner, and replace all uses of bch2_journal_keys_peek()
with peek_upto() or peek_slot().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, the journal read path used a linked list for storing the
journal entries we read from disk. But there's been a bug that's been
causing journal_flush_delay to incorrectly be set to 0, leading to far
more journal entries than is normal being written out, which then means
filesystems are no longer able to start due to the O(n^2) behaviour of
inserting into/searching that linked list.
Fix this by switching to a radix tree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When there weren't any keys in the journal there's no need to allocate
the buffer - but doing that causes a spurious -ENOMEM.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Move checks for whether the device & bucket are valid from the
.key_invalid method to bch2_check_alloc_key(). This is because
.key_invalid() is called on keys that may no longer exist (post
journal replay), which is a problem when removing/resizing devices.
- We weren't checking the need_discard btree to ensure that every set
bucket has a corresponding alloc key. This refactors the code for
checking the freespace btree, so that it now checks both.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Btree updates before we go RW work by inserting into the array of keys
that journal replay will insert - but inserting into a flat array is
O(n), meaning if btree_gc needs to update many alloc keys, we're O(n^2).
Fortunately, the updates btree_gc does happens in sequential order,
which means a gap buffer works nicely here - this patch implements a gap
buffer for journal keys.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
All code using the in-memory bucket array, excluding GC, has now been
converted to use the alloc btree directly - so we can finally delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds two new btrees for the upcoming allocator rewrite: an extents
btree of free buckets, and a btree for buckets awaiting discards.
We also add a new trigger for alloc keys to keep the new btrees up to
date, and a compatibility path to initialize them on existing
filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since journal reclaim -> btree key cache flushing may require the
allocation of new btree nodes, it has an implicit dependency on copygc
in order to make forward progress - so we should avoid blocking copygc
unless the journal is really close to full.
This introduces watermarks to replace our single MAY_GET_UNRESERVED bit
in the journal, and adds a watermark for copygc and plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds bch2_journal_log_msg(), which just logs a message to the
journal, and uses it to mark startup and when journal replay finishes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This improves __bch2_trans_commit - early in the recovery process, when
we're running btree_gc and before we want to go RW, it now uses
bch2_journal_key_insert() to add the update to the list of updates for
journal replay to do, instead of btree_gc having to use separate
interfaces depending on whether we're running at bringup or, later,
runtime.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch improves the superblock .to_text() methods and adds methods
for all types that were missing them. It also improves printbufs by
allowing them to specfiy what units we want to be printing in, and adds
new wrapper methods for unifying our kernel and userspace environments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add an option that tells recovery to only read the journal, to be used
by the list_journal command.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Kent Overstreet