-----BEGIN PGP SIGNATURE-----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=jolV
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"A single fix to correct a wrong BUG_ON() condition for deboosted
tasks"
* tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix BUG_ON condition for deboosted tasks
This pull request contains a pair of commits that fix 282d8998e9 ("srcu:
Prevent expedited GPs and blocking readers from consuming CPU"), which
was itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing. That SRCU fix for
KLP introduced large (as in minutes) boot-time delays to embedded Linux
kernels running on qemu/KVM. These delays were due to the emulation of
certain MMIO operations controlling memory layout, which were emulated
with one expedited grace period per access. Common configurations
required thousands of boot-time MMIO accesses, and thus thousands of
boot-time expedited SRCU grace periods.
In these configurations, the occasional sleeps that allowed KLP to proceed
caused excessive boot delays. These commits preserve enough sleeps to
permit KLP to proceed, but few enough that the virtual embedded kernels
still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window,
and the bug is causing significant inconvenience, hence this pull request.
-----BEGIN PGP SIGNATURE-----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=ndhB
-----END PGP SIGNATURE-----
Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a pair of commits that fix 282d8998e9 ("srcu: Prevent
expedited GPs and blocking readers from consuming CPU"), which was
itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing.
That SRCU fix for KLP introduced large (as in minutes) boot-time
delays to embedded Linux kernels running on qemu/KVM. These delays
were due to the emulation of certain MMIO operations controlling
memory layout, which were emulated with one expedited grace period per
access. Common configurations required thousands of boot-time MMIO
accesses, and thus thousands of boot-time expedited SRCU grace
periods.
In these configurations, the occasional sleeps that allowed KLP to
proceed caused excessive boot delays. These commits preserve enough
sleeps to permit KLP to proceed, but few enough that the virtual
embedded kernels still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window, and
the bug is causing significant inconvenience"
* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
srcu: Make expedited RCU grace periods block even less frequently
srcu: Block less aggressively for expedited grace periods
Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.
It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)
Fixes: 353f7988dd ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tasks the are being deboosted from SCHED_DEADLINE might enter
enqueue_task_dl() one last time and hit an erroneous BUG_ON condition:
since they are not boosted anymore, the if (is_dl_boosted()) branch is
not taken, but the else if (!dl_prio) is and inside this one we
BUG_ON(!is_dl_boosted), which is of course false (BUG_ON triggered)
otherwise we had entered the if branch above. Long story short, the
current condition doesn't make sense and always leads to triggering of a
BUG.
Fix this by only checking enqueue flags, properly: ENQUEUE_REPLENISH has
to be present, but additional flags are not a problem.
Fixes: 64be6f1f5f ("sched/deadline: Don't replenish from a !SCHED_DEADLINE entity")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220714151908.533052-1-juri.lelli@redhat.com
When the pipe is closed, we mark the associated watchqueue defunct by
calling watch_queue_clear(). However, while that is protected by the
watchqueue lock, new watchqueue entries aren't actually added under that
lock at all: they use the pipe->rd_wait.lock instead, and looking up
that pipe happens without any locking.
The watchqueue code uses the RCU read-side section to make sure that the
wqueue entry itself hasn't disappeared, but that does not protect the
pipe_info in any way.
So make sure to actually hold the wqueue lock when posting watch events,
properly serializing against the pipe being torn down.
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The purpose of commit 282d8998e9 ("srcu: Prevent expedited GPs
and blocking readers from consuming CPU") was to prevent a long
series of never-blocking expedited SRCU grace periods from blocking
kernel-live-patching (KLP) progress. Although it was successful, it also
resulted in excessive boot times on certain embedded workloads running
under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive"
means increasing the boot time up into the three-to-four minute range.
This increase in boot time was due to the more than 6000 back-to-back
invocations of synchronize_rcu_expedited() within the KVM host OS, which
in turn resulted from qemu's emulation of a long series of MMIO accesses.
Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace
periods") did not significantly help this particular use case.
Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the
value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values
of non-sleeping per phase counts on a system with preemption enabled,
and observed the following boot times:
+──────────────────────────+────────────────+
| SRCU_MAX_NODELAY_PHASE | Boot time (s) |
+──────────────────────────+────────────────+
| 100 | 30.053 |
| 150 | 25.151 |
| 200 | 20.704 |
| 250 | 15.748 |
| 500 | 11.401 |
| 1000 | 11.443 |
| 10000 | 11.258 |
| 1000000 | 11.154 |
+──────────────────────────+────────────────+
Analysis on the experiment results show additional improvements with
CPU-bound delays approaching one jiffy in duration. This improvement was
also seen when number of per-phase iterations were scaled to one jiffy.
This commit therefore scales per-grace-period phase number of non-sleeping
polls so that non-sleeping polls extend for about one jiffy. In addition,
the delay-calculation call to srcu_get_delay() in srcu_gp_end() is
replaced with a simple check for an expedited grace period. This change
schedules callback invocation immediately after expedited grace periods
complete, which results in greatly improved boot times. Testing done
by Marc and Zhangfei confirms that this change recovers most of the
performance degradation in boottime; for CONFIG_HZ_250 configuration,
specifically, boot times improve from 3m50s to 41s on Marc's setup;
and from 2m40s to ~9.7s on Zhangfei's setup.
In addition to the changes to default per phase delays, this
change adds 3 new kernel parameters - srcutree.srcu_max_nodelay,
srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay.
This allows users to configure the srcu grace period scanning delays in
order to more quickly react to additional use cases.
Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods")
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: yueluck <yueluck@163.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers
from consuming CPU") fixed a problem where a long-running expedited SRCU
grace period could block kernel live patching. It did so by giving up
on expediting once a given SRCU expedited grace period grew too old.
Unfortunately, this added excessive delays to boots of virtual embedded
systems specifying "-bios QEMU_EFI.fd" to qemu. This commit therefore
makes the transition away from expediting less aggressive, increasing
the per-grace-period phase number of non-sleeping polls of readers from
one to three and increasing the required grace-period age from one jiffy
(actually from zero to one jiffies) to two jiffies (actually from one
to two jiffies).
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: chenxiang (M)" <chenxiang66@hisilicon.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
loops due to insufficient locking
-----BEGIN PGP SIGNATURE-----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=/ETy
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- A single data race fix on the perf event cleanup path to avoid
endless loops due to insufficient locking
* tag 'perf_urgent_for_v5.19_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
-----BEGIN PGP SIGNATURE-----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=vRnn
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Make pr_flush() fast when consoles are suspended.
* tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: do not wait for consoles when suspended
The console_stop() and console_start() functions call pr_flush().
When suspending, these functions are called by the serial subsystem
while the serial port is suspended. In this scenario, if there are
any pending messages, a call to pr_flush() will always result in a
timeout because the serial port cannot make forward progress. This
causes longer suspend and resume times.
Add a check in pr_flush() so that it will immediately timeout if
the consoles are suspended.
Fixes: 3b604ca812 ("printk: add pr_flush()")
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220715061042.373640-2-john.ogness@linutronix.de
"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.
Fixes: 4518085e12 ("mm, sysctl: make NUMA stats configurable")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t parameter to
ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering
(after atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmLQXuAACgkQMUZtbf5S
Irv3sBAAxoD5A0Q5zRLmfTvbXth8fVfWmqvDfxJvOcChr97Q/JyCTZrmSIqhIz85
6ADxF45PuOivpBU8dA3MF9gCtvlWcU6SJpRVZOP0v+FfZBESGdskG9OWXlS50mht
IF64LlEzfjvD8Mylf2xiuuuaDcDzuF9s2KXCBSh3qFDXP9VYPaSMjA22+YwApkvT
29EKSujBIod0ScIeP6rA7nZKtxNloGp+tGNeHqxP+LrALq5pQlwA43wTyvcgvfME
QgGsqUcn4UzaxJ6YIFNNwx+KRJI7JCdgxNupehaExdnvZJNHDuxSZKXwkCKFOhB6
vOQDDbfDCtTaFfw0elpF18hayUtDyl9ezAR1DlxZWwyPv46gHFlH/PreXLf4Zvvh
R8dAP5YLQjtNri3Ae8gdiQYzct0WXKjiauNdjF60Hh1dXe6j01Vbqh92J96Zr14U
uxDRWzKi1pyfrAULY4BB7sRLXc6IllcUFEnMmKYhYl7afV8VB0OjQ83VKjxW4az8
gcczXejgW6rNcV128vLYHICUCawoiIlA29efM17vGG7Q65O/vhqOxO8Moi1hiQN+
2GwMWxCQ3lIXz41oQ2TNt3ekDYuSFhj8T/qyQEOckp+QW91nbseJBIhyU7MF0WE9
e5sETK8CJMzQwF/zkJMAuohvc+IelGdhRayHVGBYWGwVN1CCqiU=
=TFnI
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d950 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYtAwjhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5TaxAQD2uVSa1/t9/cdTz3jWdWKrF080jChb
uiYsZKA4RHbwjgEA8dCAa5zsfHX8Y0+vVqA65eyu1dQA98WbJDMQ4AaFVAg=
=7Yy6
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Here are a number of fixes for recently found bugs.
Only 'ima: fix violation measurement list record' was introduced in
the current release. The rest address existing bugs"
* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix potential memory leak in ima_init_crypto()
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix a potential integer overflow in ima_appraise_measurement
ima: fix violation measurement list record
Revert "evm: Fix memleak in init_desc"
This pull request contains the fix for an old and subtle bug in the
migration path. css_sets are used to track tasks and migrations are tasks
moving from a group of css_sets to another group of css_sets. The migration
path pins all source and destination css_sets in the prep stage.
Unfortunately, it was overloading the same list_head entry to track sources
and destinations, which got confused for migrations which are partially
identity leading to use-after-frees. Fixed by using dedicated list_heads for
tracking sources and destinations.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYs48bg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGb+HAQDNfUNLYajLjwJNklQdu/S4fxsg0qiY6J8SVkpo
NYP2zQEAjZmBdNnW8MqutETBCwKq8v80gCphIT/Z72NNPStqPgQ=
=r72j
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Fix an old and subtle bug in the migration path.
css_sets are used to track tasks and migrations are tasks moving from
a group of css_sets to another group of css_sets. The migration path
pins all source and destination css_sets in the prep stage.
Unfortunately, it was overloading the same list_head entry to track
sources and destinations, which got confused for migrations which are
partially identity leading to use-after-frees.
Fixed by using dedicated list_heads for tracking sources and
destinations"
* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.
Fixes: 99d5cadfde ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb94441306 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Jihing reported a race between perf_event_set_output() and
perf_mmap_close():
CPU1 CPU2
perf_mmap_close(e2)
if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0
detach_rest = true
ioctl(e1, IOC_SET_OUTPUT, e2)
perf_event_set_output(e1, e2)
...
list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry)
ring_buffer_attach(e, NULL);
// e1 isn't yet added and
// therefore not detached
ring_buffer_attach(e1, e2->rb)
list_add_rcu(&e1->rb_entry,
&e2->rb->event_list)
After this; e1 is attached to an unmapped rb and a subsequent
perf_mmap() will loop forever more:
again:
mutex_lock(&e->mmap_mutex);
if (event->rb) {
...
if (!atomic_inc_not_zero(&e->rb->mmap_count)) {
...
mutex_unlock(&e->mmap_mutex);
goto again;
}
}
The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach
in perf_event_set_output() holds e1->mmap_mutex. As such there is no
serialization to avoid this race.
Change perf_event_set_output() to take both e1->mmap_mutex and
e2->mmap_mutex to alleviate that problem. Additionally, have the loop
in perf_mmap() detach the rb directly, this avoids having to wait for
the concurrent perf_mmap_close() to get around to doing it to make
progress.
Fixes: 9bb5d40cd9 ("perf: Fix mmap() accounting hole")
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net
- Fix memory leak by reverting what was thought to be a double free.
A static tool had gave a false positive that a double free was
possible in the error path, but it was actually a different location
that confused the static analyzer (and those of us that reviewed it).
- Move use of static buffers by ftrace_dump() to a location that can
be used by kgdb's ftdump(), as it needs it for the same reasons.
- Clarify in the Kconfig description that function tracing has negligible
impact on x86, but may have a bit bigger impact on other architectures.
- Remove unnecessary extra semicolon in trace event.
- Make a local variable static that is used in the fprobes sample
- Use KSYM_NAME_LEN for length of function in kprobe sample and get
rid of unneeded macro for the same purpose.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYs3fgBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlIKAQC9uvEb7fVduv834yU/HiPBbjYjZ7x5
q+G/6EbNVE5htwEA91IU90YdmCPDOkXovuUlTNB/1igvugFPQgR2BwIqgAQ=
=+4E5
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes and minor clean ups for tracing:
- Fix memory leak by reverting what was thought to be a double free.
A static tool had gave a false positive that a double free was
possible in the error path, but it was actually a different
location that confused the static analyzer (and those of us that
reviewed it).
- Move use of static buffers by ftrace_dump() to a location that can
be used by kgdb's ftdump(), as it needs it for the same reasons.
- Clarify in the Kconfig description that function tracing has
negligible impact on x86, but may have a bit bigger impact on other
architectures.
- Remove unnecessary extra semicolon in trace event.
- Make a local variable static that is used in the fprobes sample
- Use KSYM_NAME_LEN for length of function in kprobe sample and get
rid of unneeded macro for the same purpose"
* tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
samples: Use KSYM_NAME_LEN for kprobes
fprobe/samples: Make sample_probe static
blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon
ftrace: Be more specific about arch impact when function tracer is enabled
tracing: Fix sleeping while atomic in kdb ftdump
tracing/histograms: Fix memory leak problem
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.
The start of functions when -pg is used to compile the kernel is:
push {lr}
bl 8010e7c0 <__gnu_mcount_nc>
When function tracing is tuned off, it becomes:
push {lr}
add sp, sp, #4
Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.
Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.
Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home
Reported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().
This appears to have been caused by commit ff895103a8 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91b9 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.
The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.
Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa22b ("tracing: Show real
address for trace event arguments"), so we'll move that too.
Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid
Fixes: ff895103a8 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa22b ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This reverts commit 46bbe5c671.
As commit 46bbe5c671 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
> In parse_var_defs() if there is a problem allocating
> var_defs.expr, the earlier var_defs.name is freed.
> This free is duplicated by free_var_defs() which frees
> the rest of the list.
However, if there is a problem allocating N-th var_defs.expr:
+ in parse_var_defs(), the freed 'earlier var_defs.name' is
actually the N-th var_defs.name;
+ then in free_var_defs(), the names from 0th to (N-1)-th are freed;
IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
\
|
0th 1th (N-1)-th N-th V
+-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
+-------------+-------------+-----+-------------+-----------
These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.
If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
$ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
Then kmemleak reports:
unreferenced object 0xffff8fb100ef3518 (size 8):
comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
hex dump (first 8 bytes):
76 31 00 00 b1 8f ff ff v1......
backtrace:
[<0000000038fe4895>] kstrdup+0x2d/0x60
[<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
[<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
[<0000000066737a4c>] event_trigger_write+0x75/0xd0
[<000000007341e40c>] vfs_write+0xbb/0x2a0
[<0000000087fde4c2>] ksys_write+0x59/0xd0
[<00000000581e9cdf>] do_syscall_64+0x3a/0x80
[<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 46bbe5c671 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Although most of the move of code in in v5.19-rc1 should have not
introduced a regression patch review on one of the file changes captured
a checkpatch warning which advised to use strscpy() and it caused a
buffer overflow when an incorrect length is passed.
Another change which checkpatch complained about was an odd RCU usage,
but that was properly addressed in a separate patch to the move by Aaron.
That caused a regression with PREEMPT_RT=y due to an unbounded latency.
This series fixes both and adjusts documentation which we forgot to do
for the move.
-----BEGIN PGP SIGNATURE-----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=DsSg
-----END PGP SIGNATURE-----
Merge tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fixes from Luis Chamberlain:
"Although most of the move of code in in v5.19-rc1 should have not
introduced a regression patch review on one of the file changes
captured a checkpatch warning which advised to use strscpy() and it
caused a buffer overflow when an incorrect length is passed.
Another change which checkpatch complained about was an odd RCU usage,
but that was properly addressed in a separate patch to the move by
Aaron. That caused a regression with PREEMPT_RT=y due to an unbounded
latency.
This series fixes both and adjusts documentation which we forgot to do
for the move"
* tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT
doc: module: update file references
module: Fix "warning: variable 'exit' set but not used"
module: Fix selfAssignment cppcheck warning
modules: Fix corruption of /proc/kallsyms
The commit 08126db5ff ("module: kallsyms: Fix suspicious rcu usage")
under PREEMPT_RT=y, disabling preemption introduced an unbounded
latency since the loop is not fixed. This change caused a regression
since previously preemption was not disabled and we would dereference
RCU-protected pointers explicitly. That being said, these pointers
cannot change.
Before kallsyms-specific data is prepared/or set-up, we ensure that
the unformed module is known to be unique i.e. does not already exist
(see load_module()). Therefore, we can fix this by using the common and
more appropriate RCU flavour as this section of code can be safely
preempted.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: 08126db5ff ("module: kallsyms: Fix suspicious rcu usage")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
As Chris explains, the comment above exit_itimers() is not correct,
we can race with proc_timers_seq_ops. Change exit_itimers() to clear
signal->posix_timers with ->siglock held.
Cc: <stable@vger.kernel.org>
Reported-by: chris@accessvector.net
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CI reported the following splat while running the strace testsuite:
WARNING: CPU: 1 PID: 3570031 at kernel/ptrace.c:272 ptrace_check_attach+0x12e/0x178
CPU: 1 PID: 3570031 Comm: strace Tainted: G OE 5.19.0-20220624.rc3.git0.ee819a77d4e7.300.fc36.s390x #1
Hardware name: IBM 3906 M04 704 (z/VM 7.1.0)
Call Trace:
[<00000000ab4b645a>] ptrace_check_attach+0x132/0x178
([<00000000ab4b6450>] ptrace_check_attach+0x128/0x178)
[<00000000ab4b6cde>] __s390x_sys_ptrace+0x86/0x160
[<00000000ac03fcec>] __do_syscall+0x1d4/0x200
[<00000000ac04e312>] system_call+0x82/0xb0
Last Breaking-Event-Address:
[<00000000ab4ea3c8>] wait_task_inactive+0x98/0x190
This is because JOBCTL_TRACED is set, but the task is not in TASK_TRACED
state. Caused by ptrace_unfreeze_traced() which does:
task->jobctl &= ~TASK_TRACED
but it should be:
task->jobctl &= ~JOBCTL_TRACED
Fixes: 31cae1eaae ("sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
bpf 2022-07-08
We've added 3 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 40 insertions(+), 24 deletions(-).
The main changes are:
1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet.
2) Fix spurious packet loss in generic XDP when pushing packets out (note
that native XDP is not affected by the issue), from Johan Almbladh.
3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before
its set in stone as UAPI, from Joanne Koong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
bpf: Make sure mac_header was set before using it
xdp: Fix spurious packet loss in generic XDP TX path
====================
Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_doulongvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_doulongvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_douintvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 61d9b56a89 ("sysctl: add unsigned int range support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side. For now, proc_douintvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side. For now, proc_dointvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
added the bpf_dynptr_write() and bpf_dynptr_read() APIs.
However, it will be needed for some dynptr types to pass in flags as
well (e.g. when writing to a skb, the user may like to invalidate the
hash or recompute the checksum).
This patch adds a "u64 flags" arg to the bpf_dynptr_read() and
bpf_dynptr_write() APIs before their UAPI signature freezes where
we then cannot change them anymore with a 5.19.x released kernel.
Fixes: 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220706232547.4016651-1-joannelkoong@gmail.com
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running. Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_MODULE_UNLOAD is not selected, 'exit' is
set but never used.
It is not possible to replace the #ifdef CONFIG_MODULE_UNLOAD by
IS_ENABLED(CONFIG_MODULE_UNLOAD) because mod->exit doesn't exist
when CONFIG_MODULE_UNLOAD is not selected.
And because of the rcu_read_lock_sched() section it is not easy
to regroup everything in a single #ifdef. Let's regroup partially
and add missing #ifdef to completely opt out the use of
'exit' when CONFIG_MODULE_UNLOAD is not selected.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
cppcheck reports the following warnings:
kernel/module/main.c:1455:26: warning: Redundant assignment of 'mod->core_layout.size' to itself. [selfAssignment]
mod->core_layout.size = strict_align(mod->core_layout.size);
^
kernel/module/main.c:1489:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1493:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1504:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1459:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1463:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1467:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
This is due to strict_align() being a no-op when
CONFIG_STRICT_MODULE_RWX is not selected.
Transform strict_align() macro into an inline function. It will
allow type checking and avoid the selfAssignment warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The commit 91fb02f315 ("module: Move kallsyms support into a separate
file") changed from using strlcpy() to using strscpy() which created a
buffer overflow. That happened because:
1) an incorrect value was passed as the buffer length
2) strscpy() (unlike strlcpy()) may copy beyond the length of the
input string when copying word-by-word.
The assumption was that because it was already known that the strings
being copied would fit in the space available, it was not necessary
to correctly set the buffer length. strscpy() breaks that assumption
because although it will not touch bytes beyond the given buffer length
it may write bytes beyond the input string length when writing
word-by-word.
The result of the buffer overflow is to corrupt the symbol type
information that follows. e.g.
$ sudo cat -v /proc/kallsyms | grep '\^' | head
ffffffffc0615000 ^@ rfcomm_session_get [rfcomm]
ffffffffc061c060 ^@ session_list [rfcomm]
ffffffffc06150d0 ^@ rfcomm_send_frame [rfcomm]
ffffffffc0615130 ^@ rfcomm_make_uih [rfcomm]
ffffffffc07ed58d ^@ bnep_exit [bnep]
ffffffffc07ec000 ^@ bnep_rx_control [bnep]
ffffffffc07ec1a0 ^@ bnep_session [bnep]
ffffffffc07e7000 ^@ input_leds_event [input_leds]
ffffffffc07e9000 ^@ input_leds_handler [input_leds]
ffffffffc07e7010 ^@ input_leds_disconnect [input_leds]
Notably, the null bytes (represented above by ^@) can confuse tools.
Fix by correcting the buffer length.
Fixes: 91fb02f315 ("module: Move kallsyms support into a separate file")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Kuee reported a corner case where the tnum becomes constant after the call
to __reg_bound_offset(), but the register's bounds are not, that is, its
min bounds are still not equal to the register's max bounds.
This in turn allows to leak pointers through turning a pointer register as
is into an unknown scalar via adjust_ptr_min_max_vals().
Before:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff;
0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that
is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has
not been done at that point via __update_reg_bounds(), which would have improved
the umax to be equal to umin.
Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync()
helper and use it consistently everywhere. After the fix, bounds have been
corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register
is regarded as a 'proper' constant scalar of 0.
After:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
Fixes: b03c9f9fdc ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net
Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the
register value does not match expectations for the fall-through path. For
example:
Before fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*]
6: (95) exit
R0 !read_ok
After fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*]
6: (95) exit
R0 !read_ok
As can be seen on line 5 for the branch fall-through path in R2 [*] is that
given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as
upper 32 bit are known to be zero. However, verifier incorrectly concludes
that r2 = 571 which is far off.
The problem is it only marks false{true}_reg as known in the switch for JE/NE
case, but at the end of the function, it uses {false,true}_{64,32}off to
update {false,true}_reg->var_off and they still hold the prior value of
{false,true}_reg->var_off before it got marked as known. The subsequent
__reg_combine_32_into_64() then propagates this old var_off and derives new
bounds. The information between min/max bounds on {false,true}_reg from
setting the register to known const combined with the {false,true}_reg->var_off
based on the old information then derives wrong register data.
Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant
{false,true}_{64,32}off tnums along with the register marking to known
constant.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it had been broken for a decade.
Commit 28438794ab ("modpost: fix section mismatch check for exported
init/exit sections") fixed it so modpost started to warn it again, then
this showed up:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup()
The symbol tick_nohz_full_setup is exported and annotated __init
Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export.
Drop the export because tick_nohz_full_setup() is only called from the
built-in code in kernel/sched/isolation.c.
Fixes: ae9e557b5b ("time: Export tick start/stop functions for rcutorture")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes for post-5.18 changes:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes pre-5.18 material:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYri4RgAKCRDdBJ7gKXxA
jmhsAQDCvGqtIUhgkTwid8KBRNbowsg0LXd6k+gUjcxBhH403wEA0r0cxxkDAmgr
QNXn/qZRzQP2ji+pdjH9NBOsd2g2XQA=
=UGJ7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
-----BEGIN PGP SIGNATURE-----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=Qrcs
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: use the correct size for dma_set_encrypted()
-----BEGIN PGP SIGNATURE-----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=3uDs
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Series fixing issues with sysfs locking and name reuse (Christoph)
- NVMe pull request via Christoph:
- Fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- Add another broken identifier quirk (Leo Savernik)
- Fix up a quirk because Samsung reuses PCI IDs over different
products (Christoph Hellwig)
- Remove old WARN_ON() that doesn't apply anymore (Li)
- Fix for using a stale cached request value for rq-qos throttling
mechanisms that may schedule(), like iocost (me)
- Remove unused parameter to blk_independent_access_range() (Damien)
* tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
block: remove WARN_ON() from bd_link_disk_holder
nvme: move the Samsung X5 quirk entry to the core quirks
nvme: fix the CRIMS and CRWMS definitions to match the spec
nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH
block: pop cached rq before potentially blocking rq_qos_throttle()
block: remove queue from struct blk_independent_access_range
block: freeze the queue earlier in del_gendisk
block: remove per-disk debugfs files in blk_unregister_queue
block: serialize all debugfs operations using q->debugfs_mutex
block: disable the elevator int del_gendisk
-----BEGIN PGP SIGNATURE-----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=CmXV
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk kernel thread revert from Petr Mladek:
"Revert printk console kthreads.
The testing of 5.19 release candidates revealed issues that did not
happen when all consoles were serialized using the console semaphore.
More time is needed to check expectations of the existing console
drivers and be confident that they can be safely used in parallel"
* tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: add functions to prefer direct printing"
Revert "printk: add kthread console printers"
Revert "printk: extend console_lock for per-console locking"
Revert "printk: remove @console_locked"
Revert "printk: Block console kthreads when direct printing will be required"
Revert "printk: Wait for the global console lock when the system is going down"
