Boqun pointed out that workqueues aren't handling BH work items on offlined
CPUs. Unlike tasklet which transfers out the pending tasks from
CPUHP_SOFTIRQ_DEAD, BH workqueue would just leave them pending which is
problematic. Note that this behavior is specific to BH workqueues as the
non-BH per-CPU workers just become unbound when the CPU goes offline.
This patch fixes the issue by draining the pending BH work items from an
offlined CPU from CPUHP_SOFTIRQ_DEAD. Because work items carry more context,
it's not as easy to transfer the pending work items from one pool to
another. Instead, run BH work items which execute the offlined pools on an
online CPU.
Note that this assumes that no further BH work items will be queued on the
offlined CPUs. This assumption is shared with tasklet and should be fine for
conversions. However, this issue also exists for per-CPU workqueues which
will just keep executing work items queued after CPU offline on unbound
workers and workqueue should reject per-CPU and BH work items queued on
offline CPUs. This will be addressed separately later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: http://lkml.kernel.org/r/Zdvw0HdSXcU3JZ4g@boqun-archlinux
To streamline the transition from tasklets to worqueues, a new helper
function, from_work(), is introduced. This helper, inspired by existing
from_() patterns, utilizes container_of() and eliminates the redundancy
of declaring variable types, leading to more concise and readable code.
The modified code snippet demonstrates the enhanced clarity achieved
with from_wq():
void callback(struct work_struct *w)
{
- struct some_data_structure *local = container_of(w,
struct some_data_structure,
work);
+ struct some_data_structure *local = from_work(local, w, work);
This change aims to facilitate a smoother transition and uphold code
quality standards.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git disable_work-v3
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The bits of work->data are used for a few different purposes. How the bits
are used is determined by enum work_bits. The planned disable/enable support
will add another use, so let's clean it up a bit in preparation.
- Let WORK_STRUCT_*_BIT's values be determined by enum definition order.
- Deliminate different bit sections the same way using SHIFT and BITS
values.
- Rename __WORK_OFFQ_CANCELING to WORK_OFFQ_CANCELING_BIT for consistency.
- Introduce WORK_STRUCT_PWQ_SHIFT and replace WORK_STRUCT_FLAG_MASK and
WORK_STRUCT_WQ_DATA_MASK with WQ_STRUCT_PWQ_MASK for clarity.
- Improve documentation.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Since 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement
for unbound workqueues"), unbound workqueues have separate min_active which
sets the number of interdependent work items that can be handled. This value
is currently initialized to WQ_DFL_MIN_ACTIVE which is 8. This isn't high
enough for some users, let's add an interface to adjust the setting.
Signed-off-by: Tejun Heo <tj@kernel.org>
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
automoatically promoted UNBOUND workqueues w/ @max_active==1 to ordered
workqueues because UNBOUND workqueues w/ @max_active==1 used to be the way
to create ordered workqueues and the new NUMA support broke it. These
problems can be subtle and the fact that they can only trigger on NUMA
machines made them even more difficult to debug.
However, overloading the UNBOUND allocation interface this way creates other
issues. It's difficult to tell whether a given workqueue actually needs to
be ordered and users that legitimately want a min concurrency level wq
unexpectedly gets an ordered one instead. With planned UNBOUND workqueue
udpates to improve execution locality and more prevalence of chiplet designs
which can benefit from such improvements, this isn't a state we wanna be in
forever.
There aren't that many UNBOUND w/ @max_active==1 users in the tree and the
preceding patches audited all and converted them to
alloc_ordered_workqueue() as appropriate. This patch removes the implicit
promotion of UNBOUND w/ @max_active==1 workqueues to ordered ones.
v2: v1 patch incorrectly dropped !list_empty(&wq->pwqs) condition in
apply_workqueue_attrs_locked() which spuriously triggers WARNING and
fails workqueue creation. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304251050.45a5df1f-oliver.sang@intel.com
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws such as
the execution code accessing the tasklet item after the execution is
complete which can lead to subtle use-after-free in certain usage scenarios
and less-developed flush and cancel mechanisms.
This patch implements BH workqueues which share the same semantics and
features of regular workqueues but execute their work items in the softirq
context. As there is always only one BH execution context per CPU, none of
the concurrency management mechanisms applies and a BH workqueue can be
thought of as a convenience wrapper around softirq.
Except for the inability to sleep while executing and lack of max_active
adjustments, BH workqueues and work items should behave the same as regular
workqueues and work items.
Currently, the execution is hooked to tasklet[_hi]. However, the goal is to
convert all tasklet users over to BH workqueues. Once the conversion is
complete, tasklet can be removed and BH workqueues can directly take over
the tasklet softirqs.
system_bh[_highpri]_wq are added. As queue-wide flushing doesn't exist in
tasklet, all existing tasklet users should be able to use the system BH
workqueues without creating their own workqueues.
v3: - Add missing interrupt.h include.
v2: - Instead of using tasklets, hook directly into its softirq action
functions - tasklet[_hi]_action(). This is slightly cheaper and closer
to the eventual code structure we want to arrive at. Suggested by Lai.
- Lai also pointed out several places which need NULL worker->task
handling or can use clarification. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CAHk-=wjDW53w4-YcSmgKC5RruiRLHmJ1sXeYdp_ZgVoBw=5byA@mail.gmail.com
Tested-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
A pool_workqueue (pwq) represents the connection between a workqueue and a
worker_pool. One of the roles that a pwq plays is enforcement of the
max_active concurrency limit. Before 636b927eba ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues"), there was one pwq per each CPU
for per-cpu workqueues and per each NUMA node for unbound workqueues, which
was a natural result of per-cpu workqueues being served by per-cpu pools and
unbound by per-NUMA pools.
In terms of max_active enforcement, this was, while not perfect, workable.
For per-cpu workqueues, it was fine. For unbound, it wasn't great in that
NUMA machines would get max_active that's multiplied by the number of nodes
but didn't cause huge problems because NUMA machines are relatively rare and
the node count is usually pretty low.
However, cache layouts are more complex now and sharing a worker pool across
a whole node didn't really work well for unbound workqueues. Thus, a series
of commits culminating on 8639ecebc9 ("workqueue: Make unbound workqueues
to use per-cpu pool_workqueues") implemented more flexible affinity
mechanism for unbound workqueues which enables using e.g. last-level-cache
aligned pools. In the process, 636b927eba ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues") made unbound workqueues use
per-cpu pwqs like per-cpu workqueues.
While the change was necessary to enable more flexible affinity scopes, this
came with the side effect of blowing up the effective max_active for unbound
workqueues. Before, the effective max_active for unbound workqueues was
multiplied by the number of nodes. After, by the number of CPUs.
636b927eba ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") claims that this should generally be okay. It is okay for
users which self-regulates concurrency level which are the vast majority;
however, there are enough use cases which actually depend on max_active to
prevent the level of concurrency from going bonkers including several IO
handling workqueues that can issue a work item for each in-flight IO. With
targeted benchmarks, the misbehavior can easily be exposed as reported in
http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3.
Unfortunately, there is no way to express what these use cases need using
per-cpu max_active. A CPU may issue most of in-flight IOs, so we don't want
to set max_active too low but as soon as we increase max_active a bit, we
can end up with unreasonable number of in-flight work items when many CPUs
issue IOs at the same time. ie. The acceptable lowest max_active is higher
than the acceptable highest max_active.
Ideally, max_active for an unbound workqueue should be system-wide so that
the users can regulate the total level of concurrency regardless of node and
cache layout. The reasons workqueue hasn't implemented that yet are:
- One max_active enforcement decouples from pool boundaires, chaining
execution after a work item finishes requires inter-pool operations which
would require lock dancing, which is nasty.
- Sharing a single nr_active count across the whole system can be pretty
expensive on NUMA machines.
- Per-pwq enforcement had been more or less okay while we were using
per-node pools.
It looks like we no longer can avoid decoupling max_active enforcement from
pool boundaries. This patch implements system-wide nr_active mechanism with
the following design characteristics:
- To avoid sharing a single counter across multiple nodes, the configured
max_active is split across nodes according to the proportion of each
workqueue's online effective CPUs per node. e.g. A node with twice more
online effective CPUs will get twice higher portion of max_active.
- Workqueue used to be able to process a chain of interdependent work items
which is as long as max_active. We can't do this anymore as max_active is
distributed across the nodes. Instead, a new parameter min_active is
introduced which determines the minimum level of concurrency within a node
regardless of how max_active distribution comes out to be.
It is set to the smaller of max_active and WQ_DFL_MIN_ACTIVE which is 8.
This can lead to higher effective max_weight than configured and also
deadlocks if a workqueue was depending on being able to handle chains of
interdependent work items that are longer than 8.
I believe these should be fine given that the number of CPUs in each NUMA
node is usually higher than 8 and work item chain longer than 8 is pretty
unlikely. However, if these assumptions turn out to be wrong, we'll need
to add an interface to adjust min_active.
- Each unbound wq has an array of struct wq_node_nr_active which tracks
per-node nr_active. When its pwq wants to run a work item, it has to
obtain the matching node's nr_active. If over the node's max_active, the
pwq is queued on wq_node_nr_active->pending_pwqs. As work items finish,
the completion path round-robins the pending pwqs activating the first
inactive work item of each, which involves some pool lock dancing and
kicking other pools. It's not the simplest code but doesn't look too bad.
v4: - wq_adjust_max_active() updated to invoke wq_update_node_max_active().
- wq_adjust_max_active() is now protected by wq->mutex instead of
wq_pool_mutex.
v3: - wq_node_max_active() used to calculate per-node max_active on the fly
based on system-wide CPU online states. Lai pointed out that this can
lead to skewed distributions for workqueues with restricted cpumasks.
Update the max_active distribution to use per-workqueue effective
online CPU counts instead of system-wide and cache the calculation
results in node_nr_active->max.
v2: - wq->min/max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naohiro Aota <Naohiro.Aota@wdc.com>
Link: http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3
Fixes: 636b927eba ("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
workqueue is collecting different sorts of enums into a single unnamed enum
type which can increase confusion around enum width. Also, unnamed enums
can't be accessed from BPF. Let's break up enum definitions according to
their purposes and give them type names.
Signed-off-by: Tejun Heo <tj@kernel.org>
The goal is to get sched.h down to a type only header, so the main thing
happening in this patchset is splitting out various _types.h headers and
dependency fixups, as well as moving some things out of sched.h to
better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies.
Testing - it's been in -next, and fixes from pretty much all
architectures have percolated in - nothing major.
-----BEGIN PGP SIGNATURE-----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=3tyT
-----END PGP SIGNATURE-----
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
More sched.h dependency culling - this lets us kill a rhashtable-types.h
dependency on workqueue.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the "isolcpus" boot command line option is used to add a set
of isolated CPUs, those CPUs will be excluded automatically from
wq_unbound_cpumask to avoid running work functions from unbound
workqueues.
Recently cpuset has been extended to allow the creation of partitions
of isolated CPUs dynamically. To make it closer to the "isolcpus"
in functionality, the CPUs in those isolated cpuset partitions should be
excluded from wq_unbound_cpumask as well. This can be done currently by
explicitly writing to the workqueue's cpumask sysfs file after creating
the isolated partitions. However, this process can be error prone.
Ideally, the cpuset code should be allowed to request the workqueue code
to exclude those isolated CPUs from wq_unbound_cpumask so that this
operation can be done automatically and the isolated CPUs will be returned
back to wq_unbound_cpumask after the destructions of the isolated
cpuset partitions.
This patch adds a new workqueue_unbound_exclude_cpumask() function to
enable that. This new function will exclude the specified isolated
CPUs from wq_unbound_cpumask. To be able to restore those isolated
CPUs back after the destruction of isolated cpuset partitions, a new
wq_requested_unbound_cpumask is added to store the user provided unbound
cpumask either from the boot command line options or from writing to
the cpumask sysfs file. This new cpumask provides the basis for CPU
exclusion.
To enable users to understand how the wq_unbound_cpumask is being
modified internally, this patch also exposes the newly introduced
wq_requested_unbound_cpumask as well as a wq_isolated_cpumask to
store the cpumask to be excluded from wq_unbound_cpumask as read-only
sysfs files.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
All callers of work_on_cpu() share the same lock class key for all the
functions queued. As a result the workqueue related locking scenario for
a function A may be spuriously accounted as an inversion against the
locking scenario of function B such as in the following model:
long A(void *arg)
{
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
long B(void *arg)
{
}
void launchA(void)
{
work_on_cpu(0, A, NULL);
}
void launchB(void)
{
mutex_lock(&mutex);
work_on_cpu(1, B, NULL);
mutex_unlock(&mutex);
}
launchA and launchB running concurrently have no chance to deadlock.
However the above can be reported by lockdep as a possible locking
inversion because the works containing A() and B() are treated as
belonging to the same locking class.
The following shows an existing example of such a spurious lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted
------------------------------------------------------
kworker/0:1/9 is trying to acquire lock:
ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0
but task is already holding lock:
ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__flush_work+0x83/0x4e0
work_on_cpu+0x97/0xc0
rcu_nocb_cpu_offload+0x62/0xb0
rcu_nocb_toggle+0xd0/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}:
__mutex_lock+0x81/0xc80
rcu_nocb_cpu_deoffload+0x38/0xb0
rcu_nocb_toggle+0x144/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
percpu_down_write+0x31/0x200
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&wfc.work));
lock(rcu_state.barrier_mutex);
lock((work_completion)(&wfc.work));
lock(cpu_hotplug_lock);
*** DEADLOCK ***
2 locks held by kworker/0:1/9:
#0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500
#1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
stack backtrace:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: events work_for_cpu_fn
Call Trace:
rcu-torture: rcu_torture_read_exit: Start of episode
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x132/0x150
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
? _cpu_down+0x57/0x2b0
percpu_down_write+0x31/0x200
? _cpu_down+0x57/0x2b0
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
? __pfx_worker_thread+0x10/0x10
kthread+0xe6/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK
Fix this with providing one lock class key per work_on_cpu() caller.
Reported-and-tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
While workqueue.default_affinity_scope is writable, it only affects
workqueues which are created afterwards and isn't very useful. Instead,
let's introduce explicit "default" scope and update the effective scope
dynamically when workqueue.default_affinity_scope is changed.
Signed-off-by: Tejun Heo <tj@kernel.org>
An unbound workqueue can be served by multiple worker_pools to improve
locality. The segmentation is achieved by grouping CPUs into pods. By
default, the cache boundaries according to cpus_share_cache() define the
CPUs are grouped. Let's a workqueue is allowed to run on all CPUs and the
system has two L3 caches. The workqueue would be mapped to two worker_pools
each serving one L3 cache domains.
While this improves locality, because the pod boundaries are strict, it
limits the total bandwidth a given issuer can consume. For example, let's
say there is a thread pinned to a CPU issuing enough work items to saturate
the whole machine. With the machine segmented into two pods, no matter how
many work items it issues, it can only use half of the CPUs on the system.
While this limitation has existed for a very long time, it wasn't very
pronounced because the affinity grouping used to be always by NUMA nodes.
With cache boundaries as the default and support for even finer grained
scopes (smt and cpu), it is now an a lot more pressing problem.
This patch implements non-strict affinity scope where the pod boundaries
aren't enforced strictly. Going back to the previous example, the workqueue
would still be mapped to two worker_pools; however, the affinity enforcement
would be soft. The workers in both pools would have their cpus_allowed set
to the whole machine thus allowing the scheduler to migrate them anywhere on
the machine. However, whenever an idle worker is woken up, the workqueue
code asks the scheduler to bring back the task within the pod if the worker
is outside. ie. work items start executing within its affinity scope but can
be migrated outside as the scheduler sees fit. This removes the hard cap on
utilization while maintaining the benefits of affinity scopes.
After the earlier ->__pod_cpumask changes, the implementation is pretty
simple. When non-strict which is the new default:
* pool_allowed_cpus() returns @pool->attrs->cpumask instead of
->__pod_cpumask so that the workers are allowed to run on any CPU that
the associated workqueues allow.
* If the idle worker task's ->wake_cpu is outside the pod, kick_pool() sets
the field to a CPU within the pod.
This would be the first use of task_struct->wake_cpu outside scheduler
proper, so it isn't clear whether this would be acceptable. However, other
methods of migrating tasks are significantly more expensive and are likely
prohibitively so if we want to do this on every work item. This needs
discussion with scheduler folks.
There is also a race window where setting ->wake_cpu wouldn't be effective
as the target task is still on CPU. However, the window is pretty small and
this being a best-effort optimization, it doesn't seem to warrant more
complexity at the moment.
While the non-strict cache affinity scopes seem to be the best option, the
performance picture interacts with the affinity scope and is a bit
complicated to fully discuss in this patch, so the behavior is made easily
selectable through wqattrs and sysfs and the next patch will add
documentation to discuss performance implications.
v2: pool->attrs->affn_strict is set to true for per-cpu worker_pools.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
workqueue_attrs has two uses:
* to specify the required unouned workqueue properties by users
* to match worker_pool's properties to workqueues by core code
For example, if the user wants to restrict a workqueue to run only CPUs 0
and 2, and the two CPUs are on different affinity scopes, the workqueue's
attrs->cpumask would contains CPUs 0 and 2, and the workqueue would be
associated with two worker_pools, one with attrs->cpumask containing just
CPU 0 and the other CPU 2.
Workqueue wants to support non-strict affinity scopes where work items are
started in their matching affinity scopes but the scheduler is free to
migrate them outside the starting scopes, which can enable utilizing the
whole machine while maintaining most of the locality benefits from affinity
scopes.
To enable that, worker_pools need to distinguish the strict affinity that it
has to follow (because that's the restriction coming from the user) and the
soft affinity that it wants to apply when dispatching work items. Note that
two worker_pools with different soft dispatching requirements have to be
separate; otherwise, for example, we'd be ping-ponging worker threads across
NUMA boundaries constantly.
This patch adds workqueue_attrs->__pod_cpumask. The new field is double
underscored as it's only used internally to distinguish worker_pools. A
worker_pool's ->cpumask is now always the same as the online subset of
allowed CPUs of the associated workqueues, and ->__pod_cpumask is the pod's
subset of that ->cpumask. Going back to the example above, both worker_pools
would have ->cpumask containing both CPUs 0 and 2 but one's ->__pod_cpumask
would contain 0 while the other's 2.
* pool_allowed_cpus() is added. It returns the worker_pool's strict cpumask
that the pool's workers must stay within. This is currently always
->__pod_cpumask as all boundaries are still strict.
* As a workqueue_attrs can now track both the associated workqueues' cpumask
and its per-pod subset, wq_calc_pod_cpumask() no longer needs an external
out-argument. Drop @cpumask and instead store the result in
->__pod_cpumask.
* The above also simplifies apply_wqattrs_prepare() as the same
workqueue_attrs can be used to create all pods associated with a
workqueue. tmp_attrs is dropped.
* wq_update_pod() is updated to use wqattrs_equal() to test whether a pwq
update is needed instead of only comparing ->cpumask so that
->__pod_cpumask is compared too. It can directly compare ->__pod_cpumaks
but the code is easier to understand and more robust this way.
The only user-visible behavior change is that two workqueues with different
cpumasks no longer can share worker_pools even when their pod subsets
coincide. Going back to the example, let's say there's another workqueue
with cpumask 0, 2, 3, where 2 and 3 are in the same pod. It would be mapped
to two worker_pools - one with CPU 0, the other with 2 and 3. The former has
the same cpumask as the first pod of the earlier example and would have
shared the same worker_pool but that's no longer the case after this patch.
The worker_pools would have the same ->__pod_cpumask but their ->cpumask's
wouldn't match.
While this is necessary to support non-strict affinity scopes, there can be
further optimizations to maintain sharing among strict affinity scopes.
However, non-strict affinity scopes are going to be preferable for most use
cases and we don't see very diverse mixture of unbound workqueue cpumasks
anyway, so the additional overhead doesn't seem to justify the extra
complexity.
v2: - wq_update_pod() was incorrectly comparing target_attrs->__pod_cpumask
to pool->attrs->cpumask instead of its ->__pod_cpumask. Fix it by
using wqattrs_equal() for comparison instead.
- Per-cpu worker pools weren't initializing ->__pod_cpumask which caused
a subtle problem later on. Set it to cpumask_of(cpu) like ->cpumask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add three more affinity scopes - WQ_AFFN_CPU, SMT and CACHE - and make CACHE
the default. The code changes to actually add the additional scopes are
trivial.
Also add module parameter "workqueue.default_affinity_scope" to override the
default scope and "affinity_scope" sysfs file to configure it per workqueue.
wq_dump.py and documentations are updated accordingly.
This enables significant flexibility in configuring how unbound workqueues
behave. If affinity scope is set to "cpu", it'll behave close to a per-cpu
workqueue. On the other hand, "system" removes all locality boundaries.
Many modern machines have multiple L3 caches often while being mostly
uniform in terms of memory access. Thus, workqueue's previous behavior of
spreading work items in each NUMA node had negative performance implications
from unncessarily crossing L3 boundaries between issue and execution.
However, picking a finer grained affinity scope also has a downside in that
an issuer in one group can't utilize CPUs in other groups.
While dependent on the specifics of workload, there's usually a noticeable
penalty in crossing L3 boundaries, so let's default to CACHE. This issue
will be further addressed and documented with examples in future patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
While renamed to pod, the code still assumes that the pods are defined by
NUMA boundaries. Let's generalize it:
* workqueue_attrs->affn_scope is added. Each enum represents the type of
boundaries that define the pods. There are currently two scopes -
WQ_AFFN_NUMA and WQ_AFFN_SYSTEM. The former is the same behavior as before
- one pod per NUMA node. The latter defines one global pod across the
whole system.
* struct wq_pod_type is added which describes how pods are configured for
each affnity scope. For each pod, it lists the member CPUs and the
preferred NUMA node for memory allocations. The reverse mapping from CPU
to pod is also available.
* wq_pod_enabled is dropped. Pod is now always enabled. The previously
disabled behavior is now implemented through WQ_AFFN_SYSTEM.
* get_unbound_pool() wants to determine the NUMA node to allocate memory
from for the new pool. The variables are renamed from node to pod but the
logic still assumes they're one and the same. Clearly distinguish them -
walk the WQ_AFFN_NUMA pods to find the matching pod and then use the pod's
NUMA node.
* wq_calc_pod_cpumask() was taking @pod but assumed that it was the NUMA
node. Take @cpu instead and determine the cpumask to use from the pod_type
matching @attrs.
* apply_wqattrs_prepare() is update to return ERR_PTR() on error instead of
NULL so that it can indicate -EINVAL on invalid affinity scopes.
This patch allows CPUs to be grouped into pods however desired per type.
While this patch causes some internal behavior changes, nothing material
should change for workqueue users.
v2: Trigger WARN_ON_ONCE() in wqattrs_pod_type() if affn_scope is
WQ_AFFN_NR_TYPES which indicates that the function is called with a
worker_pool's attrs instead of a workqueue's.
Signed-off-by: Tejun Heo <tj@kernel.org>
During boot, to initialize unbound CPU pods, wq_pod_init() was called from
workqueue_init(). This is early enough for NUMA nodes to be set up but
before SMP is brought up and CPU topology information is populated.
Workqueue is in the process of improving CPU locality for unbound workqueues
and will need access to topology information during pod init. This adds a
new init function workqueue_init_topology() which is called after CPU
topology information is available and replaces wq_pod_init().
As unbound CPU pods are now initialized after workqueues are activated, we
need to revisit the workqueues to apply the pod configuration. Workqueues
which are created before workqueue_init_topology() are set up so that they
always use the default worker pool. After pods are set up in
workqueue_init_topology(), wq_update_pod() is called on all existing
workqueues to update the pool associations accordingly.
Note that wq_update_pod_attrs_buf allocation is moved to
workqueue_init_early(). This isn't necessary right now but enables further
generalization of pod handling in the future.
This patch changes the initialization sequence but the end result should be
the same.
Signed-off-by: Tejun Heo <tj@kernel.org>
With the recent removal of NUMA related module param and sysfs knob,
workqueue_attrs->no_numa is now only used to implement ordered workqueues.
Let's rename the field so that it's less confusing especially with the
planned CPU affinity awareness improvements.
Just a rename. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
A pwq (pool_workqueue) represents an association between a workqueue and a
worker_pool. When a work item is queued, the workqueue selects the pwq to
use, which in turn determines the pool, and queues the work item to the pool
through the pwq. pwq is also what implements the maximum concurrency limit -
@max_active.
As a per-cpu workqueue should be assocaited with a different worker_pool on
each CPU, it always had per-cpu pwq's that are accessed through wq->cpu_pwq.
However, unbound workqueues were sharing a pwq within each NUMA node by
default. The sharing has several downsides:
* Because @max_active is per-pwq, the meaning of @max_active changes
depending on the machine configuration and whether workqueue NUMA locality
support is enabled.
* Makes per-cpu and unbound code deviate.
* Gets in the way of making workqueue CPU locality awareness more flexible.
This patch makes unbound workqueues use per-cpu pwq's the same way per-cpu
workqueues do by making the following changes:
* wq->numa_pwq_tbl[] is removed and unbound workqueues now use wq->cpu_pwq
just like per-cpu workqueues. wq->cpu_pwq is now RCU protected for unbound
workqueues.
* numa_pwq_tbl_install() is renamed to install_unbound_pwq() and installs
the specified pwq to the target CPU's wq->cpu_pwq.
* apply_wqattrs_prepare() now always allocates a separate pwq for each CPU
unless the workqueue is ordered. If ordered, all CPUs use wq->dfl_pwq.
This makes the return value of wq_calc_node_cpumask() unnecessary. It now
returns void.
* @max_active now means the same thing for both per-cpu and unbound
workqueues. WQ_UNBOUND_MAX_ACTIVE now equals WQ_MAX_ACTIVE and
documentation is updated accordingly. WQ_UNBOUND_MAX_ACTIVE is no longer
used in workqueue implementation and will be removed later.
* All unbound pwq operations which used to be per-numa-node are now per-cpu.
For most unbound workqueue users, this shouldn't cause noticeable changes.
Work item issue and completion will be a small bit faster, flush_workqueue()
would become a bit more expensive, and the total concurrency limit would
likely become higher. All @max_active==1 use cases are currently being
audited for conversion into alloc_ordered_workqueue() and they shouldn't be
affected once the audit and conversion is complete.
One area where the behavior change may be more noticeable is
workqueue_congested() as the reported congestion state is now per CPU
instead of NUMA node. There are only two users of this interface -
drivers/infiniband/hw/hfi1 and net/smc. Maintainers of both subsystems are
cc'd. Inputs on the behavior change would be very much appreciated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: Jan Karcher <jaka@linux.ibm.com>
Based on commit c4f135d643 ("workqueue: Wrap flush_workqueue() using
a macro"), all in-tree users stopped flushing system-wide workqueues.
Therefore, start emitting runtime message so that all out-of-tree users
will understand that they need to update their code.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently show_all_workqueue is called if freeze fails at the time of
freeze the workqueues, which shows the status of all workqueues and of
all worker pools. In this cases we may only need to dump state of only
workqueues that are freezable and busy.
This patch defines show_freezable_workqueues, which uses
show_one_workqueue, a granular function that shows the state of individual
workqueues, so that dump only the state of freezable workqueues
at that time.
tj: Minor message adjustment.
Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently if the user queues a new work item unintentionally
into a wq after the destroy_workqueue(wq), the work still can
be queued and scheduled without any noticeable kernel message
before the end of a RCU grace period.
As a debug-aid facility, this commit adds a new flag
__WQ_DESTROYING to spot that issue by triggering a kernel WARN
message.
Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The syntax without dots is available since commit 43756e347f
("scripts/kernel-doc: Add support for named variable macro arguments").
The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 6417250d3f.
amdpgu need this function in order to prematurly stop pending
reset works when another reset work already in progress.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Lai Jiangshan<jiangshanlai@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since flush operation synchronously waits for completion, flushing
system-wide WQs (e.g. system_wq) might introduce possibility of deadlock
due to unexpected locking dependency. Tejun Heo commented at [1] that it
makes no sense at all to call flush_workqueue() on the shared WQs as the
caller has no idea what it's gonna end up waiting for.
Although there is flush_scheduled_work() which flushes system_wq WQ with
"Think twice before calling this function! It's very easy to get into
trouble if you don't take great care." warning message, syzbot found a
circular locking dependency caused by flushing system_wq WQ [2].
Therefore, let's change the direction to that developers had better use
their local WQs if flush_scheduled_work()/flush_workqueue(system_*_wq) is
inevitable.
Steps for converting system-wide WQs into local WQs are explained at [3],
and a conversion to stop flushing system-wide WQs is in progress. Now we
want some mechanism for preventing developers who are not aware of this
conversion from again start flushing system-wide WQs.
Since I found that WARN_ON() is complete but awkward approach for teaching
developers about this problem, let's use __compiletime_warning() for
incomplete but handy approach. For completeness, we will also insert
WARN_ON() into __flush_workqueue() after all in-tree users stopped calling
flush_scheduled_work().
Link: https://lore.kernel.org/all/YgnQGZWT%2Fn3VAITX@slm.duckdns.org/ [1]
Link: https://syzkaller.appspot.com/bug?extid=bde0f89deacca7c765b8 [2]
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp [3]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently show_workqueue_state shows the state of all workqueues and of
all worker pools. In certain cases we may need to dump state of only a
specific workqueue or worker pool. For example in destroy_workqueue we
only need to show state of the workqueue which is getting destroyed.
So rename show_workqueue_state to show_all_workqueues(to signify it
dumps state of all busy workqueues) and divide it into more granular
functions (show_one_workqueue and show_one_worker_pool), that would show
states of individual workqueues and worker pools and can be used in
cases such as the one mentioned above.
Also, as mentioned earlier, make destroy_workqueue dump data pertaining
to only the workqueue that is being destroyed and make user(s) of
earlier interface(show_workqueue_state), use new interface
(show_all_workqueues).
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are two kinds of "delayed" work items in workqueue subsystem.
One is for timer-delayed work items which are visible to workqueue users.
The other kind is for work items delayed by active management which can
not be directly visible to workqueue users. We mixed the word "delayed"
for both kinds and caused somewhat ambiguity.
This patch renames the later one (delayed by active management) to
"inactive", because it is used for workqueue active management and
most of its related symbols are named with "active" or "activate".
All "delayed" and "DELAYED" are carefully checked and renamed one by
one to avoid accidentally changing the name of the other kind for
timer-delayed.
No functional change intended.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
'wq_sysfs_register()' in annotation for 'WQ_SYSFS' is unavailable,
change it to 'workqueue_sysfs_register()'.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
8a2e8e5dec7e("workqueue: fix cwq->nr_active underflow")
allocated one more bit from the work flags, and it updated
partial of the comments (128 bytes -> 256 bytes), but it
failed to update the info about the number of reserved bits.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull workqueue updates from Tejun Heo:
"Nothing too interesting. Just two trivial patches"
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Mark up unlocked access to wq->first_flusher
workqueue: Make workqueue_init*() return void
The return values of workqueue_init() and workqueue_early_int() are
always 0, and there is no usage of their return value. So just make
them return void.
Signed-off-by: Yu Chen <chen.yu@easystack.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
It's desirable to be able to rely on the following property: All stores
preceding (in program order) a call to a successful queue_work() will be
visible from the CPU which will execute the queued work by the time such
work executes, e.g.,
{ x is initially 0 }
CPU0 CPU1
WRITE_ONCE(x, 1); [ "work" is being executed ]
r0 = queue_work(wq, work); r1 = READ_ONCE(x);
Forbids: r0 == true && r1 == 0
The current implementation of queue_work() provides such memory-ordering
property:
- In __queue_work(), the ->lock spinlock is acquired.
- On the other side, in worker_thread(), this same ->lock is held
when dequeueing work.
So the locking ordering makes things work out.
Add this property to the DocBook headers of {queue,schedule}_work().
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
padata will use these these interfaces in a later patch, so unconfine them.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
None of those functions have any users outside of workqueue.c. Confine
them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
The following commit:
87915adc3f ("workqueue: re-add lockdep dependencies for flushing")
improved deadlock checking in the workqueue implementation. Unfortunately
that patch also introduced a few false positive lockdep complaints.
This patch suppresses these false positives by allocating the workqueue mutex
lockdep key dynamically.
An example of a false positive lockdep complaint suppressed by this patch
can be found below. The root cause of the lockdep complaint shown below
is that the direct I/O code can call alloc_workqueue() from inside a work
item created by another alloc_workqueue() call and that both workqueues
share the same lockdep key. This patch avoids that that lockdep complaint
is triggered by allocating the work queue lockdep keys dynamically.
In other words, this patch guarantees that a unique lockdep key is
associated with each work queue mutex.
======================================================
WARNING: possible circular locking dependency detected
4.19.0-dbg+ #1 Not tainted
fio/4129 is trying to acquire lock:
00000000a01cfe1a ((wq_completion)"dio/%s"sb->s_id){+.+.}, at: flush_workqueue+0xd0/0x970
but task is already holding lock:
00000000a0acecf9 (&sb->s_type->i_mutex_key#14){+.+.}, at: ext4_file_write_iter+0x154/0x710
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sb->s_type->i_mutex_key#14){+.+.}:
down_write+0x3d/0x80
__generic_file_fsync+0x77/0xf0
ext4_sync_file+0x3c9/0x780
vfs_fsync_range+0x66/0x100
dio_complete+0x2f5/0x360
dio_aio_complete_work+0x1c/0x20
process_one_work+0x481/0x9f0
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&dio->complete_work)){+.+.}:
process_one_work+0x447/0x9f0
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)"dio/%s"sb->s_id){+.+.}:
lock_acquire+0xc5/0x200
flush_workqueue+0xf3/0x970
drain_workqueue+0xec/0x220
destroy_workqueue+0x23/0x350
sb_init_dio_done_wq+0x6a/0x80
do_blockdev_direct_IO+0x1f33/0x4be0
__blockdev_direct_IO+0x79/0x86
ext4_direct_IO+0x5df/0xbb0
generic_file_direct_write+0x119/0x220
__generic_file_write_iter+0x131/0x2d0
ext4_file_write_iter+0x3fa/0x710
aio_write+0x235/0x330
io_submit_one+0x510/0xeb0
__x64_sys_io_submit+0x122/0x340
do_syscall_64+0x71/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
(wq_completion)"dio/%s"sb->s_id --> (work_completion)(&dio->complete_work) --> &sb->s_type->i_mutex_key#14
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#14);
lock((work_completion)(&dio->complete_work));
lock(&sb->s_type->i_mutex_key#14);
lock((wq_completion)"dio/%s"sb->s_id);
*** DEADLOCK ***
1 lock held by fio/4129:
#0: 00000000a0acecf9 (&sb->s_type->i_mutex_key#14){+.+.}, at: ext4_file_write_iter+0x154/0x710
stack backtrace:
CPU: 3 PID: 4129 Comm: fio Not tainted 4.19.0-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0x86/0xc5
print_circular_bug.isra.32+0x20a/0x218
__lock_acquire+0x1c68/0x1cf0
lock_acquire+0xc5/0x200
flush_workqueue+0xf3/0x970
drain_workqueue+0xec/0x220
destroy_workqueue+0x23/0x350
sb_init_dio_done_wq+0x6a/0x80
do_blockdev_direct_IO+0x1f33/0x4be0
__blockdev_direct_IO+0x79/0x86
ext4_direct_IO+0x5df/0xbb0
generic_file_direct_write+0x119/0x220
__generic_file_write_iter+0x131/0x2d0
ext4_file_write_iter+0x3fa/0x710
aio_write+0x235/0x330
io_submit_one+0x510/0xeb0
__x64_sys_io_submit+0x122/0x340
do_syscall_64+0x71/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190214230058.196511-20-bvanassche@acm.org
[ Reworked the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide a new function, queue_work_node, which is meant to schedule work on
a "random" CPU of the requested NUMA node. The main motivation for this is
to help assist asynchronous init to better improve boot times for devices
that are local to a specific node.
For now we just default to the first CPU that is in the intersection of the
cpumask of the node and the online cpumask. The only exception is if the
CPU is local to the node we will just use the current CPU. This should work
for our purposes as we are currently only using this for unbound work so
the CPU will be translated to a node anyway instead of being directly used.
As we are only using the first CPU to represent the NUMA node for now I am
limiting the scope of the function so that it can only be used with unbound
workqueues.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There can be a lot of workqueue workers and they all show up with the
cryptic kworker/* names making it difficult to understand which is
doing what and how they came to be.
# ps -ef | grep kworker
root 4 2 0 Feb25 ? 00:00:00 [kworker/0:0H]
root 6 2 0 Feb25 ? 00:00:00 [kworker/u112:0]
root 19 2 0 Feb25 ? 00:00:00 [kworker/1:0H]
root 25 2 0 Feb25 ? 00:00:00 [kworker/2:0H]
root 31 2 0 Feb25 ? 00:00:00 [kworker/3:0H]
...
This patch makes workqueue workers report the latest workqueue it was
executing for through /proc/PID/{comm,stat,status}. The extra
information is appended to the kthread name with intervening '+' if
currently executing, otherwise '-'.
# cat /proc/25/comm
kworker/2:0-events_power_efficient
# cat /proc/25/stat
25 (kworker/2:0-events_power_efficient) I 2 0 0 0 -1 69238880 0 0...
# grep Name /proc/25/status
Name: kworker/2:0-events_power_efficient
Unfortunately, ps(1) truncates comm to 15 characters,
# ps 25
PID TTY STAT TIME COMMAND
25 ? I 0:00 [kworker/2:0-eve]
making it a lot less useful; however, this should be an easy fix from
ps(1) side.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Craig Small <csmall@enc.com.au>
Pull workqueue updates from Tejun Heo:
"rcu_work addition and a couple trivial changes"
* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove the comment about the old manager_arb mutex
workqueue: fix the comments of nr_idle
fs/aio: Use rcu_work instead of explicit rcu and work item
cgroup: Use rcu_work instead of explicit rcu and work item
RCU, workqueue: Implement rcu_work
There are cases where RCU callback needs to be bounced to a sleepable
context. This is currently done by the RCU callback queueing a work
item, which can be cumbersome to write and confusing to read.
This patch introduces rcu_work, a workqueue work variant which gets
executed after a RCU grace period, and converts the open coded
bouncing in fs/aio and kernel/cgroup.
v3: Dropped queue_rcu_work_on(). Documented rcu grace period behavior
after queue_rcu_work().
v2: Use rcu_barrier() instead of synchronize_rcu() to wait for
completion of previously queued rcu callback as per Paul.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Found this by accident.
There are no usages of bare cancel_work() in current kernel source.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce a helper to retrieve the current task's work struct if it is
a workqueue worker.
This allows us to fix a long-standing deadlock in several DRM drivers
wherein the ->runtime_suspend callback waits for a specific worker to
finish and that worker in turn calls a function which waits for runtime
suspend to finish. That function is invoked from multiple call sites
and waiting for runtime suspend to finish is the correct thing to do
except if it's executing in the context of the worker.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2d8f603074131eb87e588d2b803a71765bd3a2fd.1518338788.git.lukas@wunner.de
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
With __init_timer*() now matching __setup_timer*(), remove the redundant
internal interface, clean up the resulting definitions and add more
documentation.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tejun Heo