hid_connect() will call hid_pidff_init() which does
hid_device_io_start() leading to an "io already started" warning.
To fix this call hid_device_io_stop() before calling hid_connect(),
stopping IO means that connect events may be lost while hid_connect()
runs, re-enable IO and move the hidpp_connect_event() work queuing
after the hid_connect().
Note re-enabling IO is also necessary for the g920_get_config()
call later during hidpp_probe().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025190151.302376-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
HIDPP unifying is only checked once in probe() and it is also
set by probe() itself.
Drop the quirk and replace its one check by the condition which is
used to set the quirk in the first place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-13-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Drop delayed_work_cb() instead make hidpp_connect_event() the workqueue
function itself.
Besides resulting in a small cleanup this will hopefully also make
it clearer that going forward hidpp_connect_event() should only
be run from a workqueue and not be directly invoked.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-12-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
There is a connect event race in hidpp_probe() in these 2 lines:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
atomic_set(&hidpp->connected, connected);
Specifically the following can happen:
1. This line from hidpp_probe() is executed:
connected = hidpp_root_get_protocol_version(hidpp) == 0;
and sets connected to false;
2. A connect-event packet is received and does:
atomic_set(&hidpp->connected, true);
3. The next line from hidpp_probe() is executed:
atomic_set(&hidpp->connected, connected);
and sets the atomic_t back to 0 again.
4. hidpp_connect_event() runs and sees the connected device
as disconnected because of this.
To fix this make hidpp_connect_event() query the connection status
of the device itself instead of having it rely on possibly stale
data cached in struct hidpp_device.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-11-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Remove the unused connected function parameter from wtp_connect(),
m560_send_config_command() and k400_connect().
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-10-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turn hidpp_overwrite_name() into a hidpp_non_unifying_init() helper
which takes care of setting both the name and the serial for non
unifying devices.
This mirrors the hidpp_unifying_init() helper for unifying devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-8-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Move the hidpp_overwrite_name() call to before the connect check, this
puts it at the same place in the probe() order as hidpp_serial_init()
which seems more logical. This should not make a difference since this
is in the non-unifying path and only unifying devices can be probed
in non-connected state.
This is a preparation patch for moving all connected state handling
to hidpp_connect_event().
Doing this before the connect check requires dropping the protocol
version check since protocol_major is not set yet now. Instead
this relies on hidpp_root_get_feature(HIDPP_PAGE_GET_DEVICE_NAME_TYPE)
failing on older devices, just like how hidpp_get_serial() relies on
hidpp_root_get_feature(HIDPP_PAGE_DEVICE_INFORMATION) failing on older
devices. So this again makes the code more consistent.
Also stop printing an error on failure now, since with the proto
version check gone failures are expected to happen on older devices.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-7-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The data retrieved by g920_get_config() is only used by hidpp_ff_init().
Now that the hw is kept open till the end of probe() the g920_get_config()
call can be moved to just before hidpp_ff_init() to have all
the HIDPP_QUIRK_CLASS_G920 together in a single place.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-6-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
For WTP devices which start disconnected (paired with the unifying
receiver, but not connected atm) hidpp_connect_event() takes care
of calling wtp_get_config() when the device later connects.
There is no need to have a separate code path for WTP devices which
are connected at probe() time, these can use the same code-path since
probe() will queue hidpp_connect_event() for those at probe time.
Drop the unnecessary wtp_get_config() call from probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-5-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.
Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 0da0a63b7c ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit 91cf9a98ae ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).
This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.
Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.
Commit 498ba20690 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.
But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.
The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.
Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba20690 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Restarting IO causes 2 problems:
1. Some devices do not like IO being restarted this was addressed in
commit 498ba20690 ("HID: logitech-hidpp: Don't restart communication
if not necessary"), but that change has issues of its own and needs to
be reverted.
2. Restarting IO and specifically calling hid_device_io_stop() causes
received packets to be missed, which may cause connect-events to
get missed.
Restarting IO was introduced in commit 91cf9a98ae ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.
But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.
Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.
Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba20690 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel: power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel: release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel: devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel: hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel: hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel: hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel: usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel: usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel: device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel: bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel: device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel: ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel: usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel: usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel: hub_event+0xe80/0x1c10
There have been quite a few bug reports (see Link tags) about this crash.
Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Using hidpp for the M720 adds battery info reporting and hires
scrolling support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extract the internal code inside a helper function, fix the
initialization of the parameters used in the helper function
(`hidpp->answer_available` was not reset and `*response` wasn't either),
and use a `do {...} while();` loop.
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Cc: stable@vger.kernel.org
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230621-logitech-fixes-v2-1-3635f7f9c8af@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Add Logitech MX Anywhere 3 connected over Bluetooth to the device table
to get hidpi scroll supported. USB connection over the Unifying receiver
is already supported by the wildcard entry LDJ_DEVICE(HID_ANY_ID).
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the Pro X Superlight over wired USB.
The device now reports the status of its battery.
Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As per the upstream "hidpp" helpers commit:
"
There has been some confusion about error value 5 but feature specs that
refer to it generally use NOT_ALLOWED.
"
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: 80c3fecfcd
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Previously, support for the G502 had been attempted in commit
'27fc32fd9417 ("HID: logitech-hidpp: add USB PID for a few more supported
mice")'
This caused some issues and was reverted by
'addf3382c47c ("Revert "HID: logitech-hidpp: add USB PID for a few more
supported mice"")'.
Since then, a new version of this mouse has been released (Lightpseed
Wireless), and works correctly.
This device has support for battery reporting with the driver
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230630113818.13005-1-stuart.a.hayhurst@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
commit 498ba20690 ("HID: logitech-hidpp: Don't restart communication if
not necessary") put restarting communication behind that flag, and this
was apparently necessary on the T651, but the flag was not set for it.
Fixes: 498ba20690 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Hommey <mh@glandium.org>
Link: https://lore.kernel.org/r/20230617230957.6mx73th4blv7owqk@glandium.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Adds the USB and Bluetooth IDs for the Logitech G915 TKL keyboard, for device detection
For this device, this provides battery reporting on top of hid-generic
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If an attempt at contacting a receiver or a device fails because the
receiver or device never responds, don't restart the communication, only
restart it if the receiver or device answers that it's busy, as originally
intended.
This was the behaviour on communication timeout before commit 586e8fede7
("HID: logitech-hidpp: Retry commands when device is busy").
This fixes some overly long waits in a critical path on boot, when
checking whether the device is connected by getting its HID++ version.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Suggested-by: Mark Lord <mlord@pobox.com>
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set the USB interface "wireless_status" for the G935 receiver when
receiving battery notifications.
This will allow sound daemons such as Pipewire or PulseAudio to know
whether or not the headset is turned on and connected.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-6-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add the Logitech G935 headset that uses the HID++ protocol to the
list of supported devices.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-3-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Use the compiler to force a 100-length array, rather than check the
length after the fact.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Now that USB HID++ devices can gather a serial number that matches the
one that would be gathered when connected through a Unifying receiver,
remove the last difference by dropping the product ID as devices
usually have different product IDs when connected through USB or
Unifying.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying before patch: 4067-e8-ce-cd-45
- USB before patch: c086-e8-ce-cd-45
- Unifying and USB after patch: e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
For devices that support the 0x0003 feature (Device Information) version 4,
set the serial based on the output of that feature, rather than relying
on the usbhid code setting the USB serial.
This should allow the serial when connected through USB to (nearly)
match the one when connected through a unifying receiver.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying: 4067-e8-ce-cd-45
- USB before patch: 017C385C3837
- USB after patch: c086-e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
As discussed with HID maintainer Benjamin Tissoires, add myself to the
authors list and MAINTAINERS file.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230209154916.462158-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Handle the busy error coming from the device or receiver. The
documentation says a busy error can be returned when:
"
Device (or receiver) cannot answer immediately to this request
for any reason i.e:
- already processing a request from the same or another SW
- pipe full
"
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230209154916.462158-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for HID++ over Bluetooth for the Logitech Signature
M650 mouse. It comes with a dongle but can also be used over Bluetooth
without one.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220404100311.3304-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
HIDPP_QUIRK_NO_HIDINPUT isn't used by any devices but still happens to
work as HIDPP_QUIRK_DELAYED_INIT is defined to the same value. Remove
HIDPP_QUIRK_NO_HIDINPUT and use HIDPP_QUIRK_DELAYED_INIT everywhere
instead.
Tested on a T650 which requires that quirk, and a number of unifying and
Bluetooth devices that don't.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Now that we're in 2022, and the majority of desktop environments can and
should support touchpad gestures through libinput, remove the legacy
module parameter that made it possible to use gestures implemented in
firmware.
This will eventually allow simplifying the driver's initialisation code.
This reverts commit 9188dbaed6.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220154345.474596-1-hadess@hadess.net
HID++ 1.0 devices only export whether Fast Scrolling is enabled, not
whether they are capable of it. Reinstate the original quirks for the 3
supported mice so fast scrolling works again on those devices.
Fixes: 908d325e16 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216903
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230116130937.391441-1-hadess@hadess.net
On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.
If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.
Disable hi-res scrolling on those devices until we implement scroll
events through HID++.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes: 908d325e16 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Force Feedback code assumes that all the devices passed to it will
be USB devices, but that might not be the case for emulated devices.
Guard against a crash by checking the device type before poking at USB
properties.
Cc: stable@vger.kernel.org # v5.16+
Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221215154416.111704-1-hadess@hadess.net
This reverts commit 532223c8ac.
As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice,
but there are corner cases where hid-logitech-hidpp just gives up on
the mouse. This leads the end user with a dead mouse.
Given that we are at -rc8, we are definitively too late to find a proper
fix. We already identified 2 issues less than 24 hours after the bug
report. One in that ->match() was never designed to be used anywhere else
than in hid-generic, and the other that hid-logitech-hidpp has corner
cases where it gives up on devices it is not supposed to.
So we have no choice but postpone this patch to the next kernel release.
[0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 8544c812e4.
We need to revert commit 532223c8ac ("HID: logitech-hidpp: Enable HID++
for all the Logitech Bluetooth devices") because that commit might make
hid-logitech-hidpp bind on mice that are not well enough supported by
hid-logitech-hidpp, and the end result is that the probe of those mice
is now returning -ENODEV, leaving the end user with a dead mouse.
Given that commit 8544c812e4 ("HID: logitech-hidpp: Remove special-casing
of Bluetooth devices") is a direct dependency of 532223c8ac, revert it
too.
Note that this also adapt according to commit 908d325e16 ("HID:
logitech-hidpp: Detect hi-res scrolling support") to re-add support of
the devices that were removed from that commit too.
I have locally an MX Master and I tested this device with that revert,
ensuring we still have high-res scrolling.
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
According to docs a SwID should be sent for GetProtocolVersion.
> 0x10.DeviceIndex.0x00.0x1n
where n is SwID.
Signed-off-by: Andreas Bergmeier <abergmeier@gmx.net>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidpp->delayed_input can't be assigned to an object that already call
input_free_device when input_register_device fails.
Fixes: c39e3d5fc9 ("HID: logitech-hidpp: late bind the input device on wireless connection")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220812025515.19467-1-hbh25y@gmail.com
Rather than relying on a never-ending stream of patches for quirks.
This change will detect whether HID++ 1.0 hi-res scroll, HID++ 2.0
hi-res scroll or HID++ 2.0 hi-res scroll wheel is supported, and enable
the feature without the need for quirks.
Tested on a Logitech M705 mouse that was unsupported before this change.
[ 9.365324] logitech-hidpp-device 0003:046D:406D.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-4/input2:3
[ 57.472434] logitech-hidpp-device 0003:046D:406D.0006: HID++ 4.5 device connected.
[ 57.616429] logitech-hidpp-device 0003:046D:406D.0006: Detected HID++ 2.0 hi-res scroll wheel
[ 57.712424] logitech-hidpp-device 0003:046D:406D.0006: wheel multiplier = 8
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216480
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220914132146.6435-1-hadess@hadess.net
