commit 4f2bdb3c5e upstream.
When moving a station out of a VLAN and deleting the VLAN afterwards, the
fast_rx entry still holds a pointer to the VLAN's netdev, which can cause
use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx
after the VLAN change.
Cc: stable@vger.kernel.org
Reported-by: ranygh@riseup.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240316074336.40442-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 413dafc817 ]
When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62a6183c13 ]
On the 6 GHz band, probe responses are sent as broadcast to
optimise medium usage. However, without OCE configuration
we weren't accepting them, which is wrong, even if wpa_s is
by default enabling OCE. Accept them without the OCE config
as well.
Link: https://msgid.link/20240129200907.5a89c2821897.I92e9dfa0f9b350bc7f37dd4bb38031d156d78d8a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcbc84af11 ]
fast-xmit must only be enabled after the sta has been uploaded to the driver,
otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls
to the driver, leading to potential crashes because of uninitialized drv_priv
data.
Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240104181059.84032-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c98d8836b8 upstream.
This pointer can change here since the SKB can change, so we
actually later open-coded IEEE80211_SKB_CB() again. Reload
the pointer where needed, so the monitor-mode case using it
gets fixed, and then use info-> later as well.
Cc: stable@vger.kernel.org
Fixes: 5316821590 ("mac80211: fix VLAN handling with TXQs")
Link: https://msgid.link/20240131164910.b54c28d583bc.I29450cec84ea6773cff5d9c16ff92b836c331471@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b01a74b3ca ]
When a station is allocated, links are added but not
set to valid yet (e.g. during connection to an AP MLD),
we might remove the station without ever marking links
valid, and leak them. Fix that.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240111181514.6573998beaf8.I09ac2e1d41c80f82a5a616b8bd1d9d8dd709a6a6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f7d153f3 ]
The new 320 MHz channel width wasn't handled, so connecting
a station to a 320 MHz AP would limit the station to 20 MHz
(on HT) after a warning, handle 320 MHz to fix that.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com
[write a proper commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98849ba2aa ]
We need to check that cfg80211_defragment_element()
didn't return an error, since it can fail due to bad
input, and we didn't catch that before.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.8595a6b67fc0.I1225edd8f98355e007f96502e358e476c7971d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63bafd9d54 ]
If we're doing reconfig, then we cannot add the debugfs
files that are already there from before the reconfig.
Skip that in drv_change_sta_links() during reconfig.
Fixes: d2caad527c ("wifi: mac80211: add API to show the link STAs in debugfs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.88a950f43e16.Id71181780994649219685887c0fcad33d387cc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e3a2b645c ]
This fixes WARN_ONs when using AP_VLANs after station removal. The flush
call passed AP_VLAN vif to driver, but because these vifs are virtual and
not registered with drivers, we need to translate to the correct AP vif
first.
Closes: https://github.com/openwrt/openwrt/issues/12420
Fixes: 0b75a1b1e4 ("wifi: mac80211: flush queues on STA removal")
Fixes: d00800a289 ("wifi: mac80211: add flush_sta method")
Tested-by: Konstantin Demin <rockdrilla@gmail.com>
Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e160ab8516 ]
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7182c4e6b ]
When setting the interface links, ignore the change iff both the
valid links and the dormant links did not change. This is needed
to support cases where the valid links didn't change but the dormant
links did.
Fixes: 6d543b34db ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.0357b6306587.I7dbfec347949b629fea680d246a650d6207ff217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 822cab1987 ]
We can delete any that we want to remove, but we can't
recreate the links as they already exist.
Fixes: 170cd6a66d ("wifi: mac80211: add netdev per-link debugfs data and driver hook")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.3d0214838421.I512a0ff86f631ff42bf25ea0cb2e8e8616794a94@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 583058542f ]
If we just check "result & RX_DROP_UNUSABLE", this really only works
by accident, because SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE got to
have the value 1, and SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR is 2.
Fix this to really check the entire subsys mask for the value, so it
doesn't matter what the subsystem value is.
Fixes: 7f4e09700b ("wifi: mac80211: report all unusable beacon frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428e8976a1 ]
During my refactoring I wanted to get rid of the switch,
but replaced it with the wrong calculation. Fix that.
Fixes: 175ad2ec89 ("wifi: mac80211: limit A-MSDU subframes for client too")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.51bf1b8b0adb.Iffbd337fdad2b86ae12f5a39c69fb82b517f7486@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ea82df1f5 ]
In mesh_fast_tx_flush_addr() we already hold the lock, so
don't need additional hashtable RCU protection. Use the
rhashtable_lookup_fast() variant to avoid RCU protection
warnings.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eadfb54756 ]
This also has the wiphy locked here then. We need to use
the _locked version of cfg80211_sched_scan_stopped() now,
which also fixes an old deadlock there.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97c19e42b2 ]
Make the offchannel works wiphy works to have the
wiphy locked for executing them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: eadfb54756 ("wifi: mac80211: move sched-scan stop work to wiphy work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 201712512c ]
Move the scan work to wiphy work, which also simplifies
the way we handle the work vs. the scan configuration.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: eadfb54756 ("wifi: mac80211: move sched-scan stop work to wiphy work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 228e4f931b ]
Move the radar detect work to wiphy work in order
to lock the wiphy for it without doing it manually.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: eadfb54756 ("wifi: mac80211: move sched-scan stop work to wiphy work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf1 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the previous key leak fix for the other error
paths, I meant to unify all of them to the same
place, but used the wrong label, which I noticed
when doing the merge into wireless-next. Fix it.
Fixes: d097ae01eb ("wifi: mac80211: fix potential key leak")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When associating to an MLD AP, links may be disabled. Create all
resources associated with a disabled link so that we can later enable it
without having to create these resources on the fly.
Fixes: 6d543b34db ("wifi: mac80211: Support disabled links during association")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230925173028.f9afdb26f6c7.I4e6e199aaefc1bf017362d64f3869645fa6830b5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lower layer device driver stop/wake TX by calling ieee80211_stop_queue()/
ieee80211_wake_queue() while hw scan. Sometimes hw scan and PTK rekey are
running in parallel, when M4 sent from wpa_supplicant arrive while the TX
queue is stopped, then the M4 will pending send, and then new key install
from wpa_supplicant. After TX queue wake up by lower layer device driver,
the M4 will be dropped by below call stack.
When key install started, the current key flag is set KEY_FLAG_TAINTED in
ieee80211_pairwise_rekey(), and then mac80211 wait key install complete by
lower layer device driver. Meanwhile ieee80211_tx_h_select_key() will return
TX_DROP for the M4 in step 12 below, and then ieee80211_free_txskb() called
by ieee80211_tx_dequeue(), so the M4 will not send and free, then the rekey
process failed becaue AP not receive M4. Please see details in steps below.
There are a interval between KEY_FLAG_TAINTED set for current key flag and
install key complete by lower layer device driver, the KEY_FLAG_TAINTED is
set in this interval, all packet including M4 will be dropped in this
interval, the interval is step 8~13 as below.
issue steps:
TX thread install key thread
1. stop_queue -idle-
2. sending M4 -idle-
3. M4 pending -idle-
4. -idle- starting install key from wpa_supplicant
5. -idle- =>ieee80211_key_replace()
6. -idle- =>ieee80211_pairwise_rekey() and set
currently key->flags |= KEY_FLAG_TAINTED
7. -idle- =>ieee80211_key_enable_hw_accel()
8. -idle- =>drv_set_key() and waiting key install
complete from lower layer device driver
9. wake_queue -waiting state-
10. re-sending M4 -waiting state-
11. =>ieee80211_tx_h_select_key() -waiting state-
12. drop M4 by KEY_FLAG_TAINTED -waiting state-
13. -idle- install key complete with success/fail
success: clear flag KEY_FLAG_TAINTED
fail: start disconnect
Hence add check in step 11 above to allow the EAPOL send out in the
interval. If lower layer device driver use the old key/cipher to encrypt
the M4, then AP received/decrypt M4 correctly, after M4 send out, lower
layer device driver install the new key/cipher to hardware and return
success.
If lower layer device driver use new key/cipher to send the M4, then AP
will/should drop the M4, then it is same result with this issue, AP will/
should kick out station as well as this issue.
issue log:
kworker/u16:4-5238 [000] 6456.108926: stop_queue: phy1 queue:0, reason:0
wpa_supplicant-961 [003] 6456.119737: rdev_tx_control_port: wiphy_name=phy1 name=wlan0 ifindex=6 dest=ARRAY[9e, 05, 31, 20, 9b, d0] proto=36488 unencrypted=0
wpa_supplicant-961 [003] 6456.119839: rdev_return_int_cookie: phy1, returned 0, cookie: 504
wpa_supplicant-961 [003] 6456.120287: rdev_add_key: phy1, netdev:wlan0(6), key_index: 0, mode: 0, pairwise: true, mac addr: 9e:05:31:20:9b:d0
wpa_supplicant-961 [003] 6456.120453: drv_set_key: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 cipher:0xfac04, flags=0x9, keyidx=0, hw_key_idx=0
kworker/u16:9-3829 [001] 6456.168240: wake_queue: phy1 queue:0, reason:0
kworker/u16:9-3829 [001] 6456.168255: drv_wake_tx_queue: phy1 vif:wlan0(2) sta:9e:05:31:20:9b:d0 ac:0 tid:7
kworker/u16:9-3829 [001] 6456.168305: cfg80211_control_port_tx_status: wdev(1), cookie: 504, ack: false
wpa_supplicant-961 [003] 6459.167982: drv_return_int: phy1 - -110
issue call stack:
nl80211_frame_tx_status+0x230/0x340 [cfg80211]
cfg80211_control_port_tx_status+0x1c/0x28 [cfg80211]
ieee80211_report_used_skb+0x374/0x3e8 [mac80211]
ieee80211_free_txskb+0x24/0x40 [mac80211]
ieee80211_tx_dequeue+0x644/0x954 [mac80211]
ath10k_mac_tx_push_txq+0xac/0x238 [ath10k_core]
ath10k_mac_op_wake_tx_queue+0xac/0xe0 [ath10k_core]
drv_wake_tx_queue+0x80/0x168 [mac80211]
__ieee80211_wake_txqs+0xe8/0x1c8 [mac80211]
_ieee80211_wake_txqs+0xb4/0x120 [mac80211]
ieee80211_wake_txqs+0x48/0x80 [mac80211]
tasklet_action_common+0xa8/0x254
tasklet_action+0x2c/0x38
__do_softirq+0xdc/0x384
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230801064751.25803-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cisco AP module 9115 with FW 17.3 has a bug and sends a too
large maximum MPDU length in the association response
(indicating 12k) that it cannot actually process.
Work around that by taking the minimum between what's in the
association response and the BSS elements (from beacon or
probe response).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230918140607.d1966a9a532e.I090225babb7cd4d1081ee9acd40e7de7e41c15ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When returning from ieee80211_key_link(), the key needs to
have been freed or successfully installed. This was missed
in a number of error paths, fix it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.
Fixes: 15ddba5f43 ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
* Introduce Time Averaged SAR (TAS) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmToqosRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv9XQf9HDq9smbuWLvwzNjbbS31hHFLmnfhN8Zp
+Zzn47gpMCle9ahGLQyw8lcfNPWCMyqOu4sGQ6hyyuH+YXoxZryuq9QDwWo9L/b1
5Cpm4IaBYBMm0ZoOkWw2lQSzGyNrXgvCEKRVC+pYQMvr5V2aEWxT/kT4guiou9D5
OXPRFN2iqZP0Q3TKcfKWRnWn3S0Ok3kZCFuXcWkL0sgwjqP/wbAPO1XNI1IImKNM
xUd0zT4vK/layYq7i20y8blglI5kcp/aKCFEwYpQC2WPeZ3Wtl1G9PQ8eze5Gc2Q
NTw3xfr6tENIcAmYoLdBdKbUq6e6pwLwXlojlZ2beR6s7LHM30AinQ==
=2Hja
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
- Introduce Time Averaged SAR (TAS) support
* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================
Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/E1qYlA0-006vFr-Ts@formenos.hmeau.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit ccf80ddfe4 ("mac80211: mesh function and data structures
definitions") introducted this but never implemented it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230731140712.1204-1-yuehaibing@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Code inspection reveals that we switch the puncturing bitmap
before the real channel switch, since that happens only in
the second round of the worker after the channel context is
switched by ieee80211_link_use_reserved_context().
Fixes: 2cc25e4b2a ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When probing a client, first check if we have it, and then
check for the channel context, otherwise you can trigger
the warning there easily by probing when the AP isn't even
started yet. Since a client existing means the AP is also
operating, we can then keep the warning.
Also simplify the moved code a bit.
Reported-by: syzbot+999fac712d84878a7379@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 06470f7468 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
MAINTAINERS
* add missing driver git trees
ath11k
* factory test mode support
iwlwifi
* config rework to drop test devices and
split the different families
* major update for new firmware and MLO
stack
* initial multi-link reconfiguration suppor
* multi-BSSID and MLO improvements
other
* fix the last few W=1 warnings from GCC 13
* merged wireless tree to avoid conflicts
-----BEGIN PGP SIGNATURE-----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=KSBu
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.
Fixes: baa951a1c1 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver has some form of GTK rekeying offload, e.g. during
WoWLAN, mac80211 can assume that keys that the driver adds for
that are already present in the hardware acceleration. Mark them
accordingly.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144414.bc78c7ff2a3d.I5e313d69e2b6a7a4766ef82d0faa122dd4c1c46d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For extended elements, we currently only calculate the CRC
for some of them, but really we should do it also for the
rest that we care about, such as EHT operation and multi-
link.
Also, while at it, it seems we should do it even if they
aren't well-formed, so we notice if that changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
