sdev_printk() will only accept messages up to 128 bytes.
Shorten strings exceeding 128 bytes avoid printing an incomplete sentence
like:
[ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.com
Suggested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On our backend we can do something similar to LIO where we can enable and
disable UNMAP support on the fly. In the SCSI/block layer we can detect
this by just doing a rescan. However, LIO cannot detect this change because
we only check during the initial configuration. This patch allows UNMAP
detection to also happen when the user tries to turn it on.
Link: https://lore.kernel.org/r/20220628200230.15052-6-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move file's UNMAP setup code to a configure_unmap callout.
Link: https://lore.kernel.org/r/20220628200230.15052-5-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move iblock's UNMAP setup code to a configure_unmap callout.
Link: https://lore.kernel.org/r/20220628200230.15052-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a callout to configure a backend's UNMAP settings. This will be used to
allow userspace to configure UNMAP after the initial device setup, similar
to how we can set up the other attributes post device configuration.
Link: https://lore.kernel.org/r/20220628200230.15052-3-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use WSNZ=1 so if we get a WRITE_SAME with zero logical blocks we are
supposed to fail it. We do this check and failure in target_core_sbc.c
before calling into the backend, so we can remove the incorrect check in
target_core_file.
Link: https://lore.kernel.org/r/20220628200230.15052-2-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable shared host tagset to make sure that total outstanding I/O count can
not exceed controller's can_queue setting.
Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a copy and paste bug here. It should check ".rsp" instead of
".req". The error message is copy and pasted as well so update that too.
Link: https://lore.kernel.org/r/YrK1A/t3L6HKnswO@kili
Fixes: 9c40c36e75 ("scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Checks information about tx_lanes, but is not used.
Since commit 1e1e465c6d ("scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls
from host"), tx_lanes is deprecated.
As a result, ufs_qcom_link_startup_notify -> POST_CHANGE action does
nothing. If it is not going to be updated, it can be removed.
Link: https://lore.kernel.org/r/20220627235545.16943-1-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NULL pointer access issue was found for the regulator released
by ufs_mtk_vreg_fix_vccq(). Simply fix this issue by clearing
the released vreg pointer in ufs_hba struct.
Link: https://lore.kernel.org/r/20220623035052.18802-9-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add pm-qos request to support performance boosting in MediaTek UFS
platforms.
At the same time, adjust the order of function calls to be symmetric during
the low-power control flow.
Link: https://lore.kernel.org/r/20220623035052.18802-8-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add interfaces for controlling the host power to optimize the power
consumption in MediaTek UFS platforms.
Link: https://lore.kernel.org/r/20220623035052.18802-7-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In MediaTek UFS platforms, UniPro will not return reset confirm if it is in
POWERDOWN state thus hang issue may happen while disabling UFSHCI. Simply
disable this feature before UniPro leaves POWERDOWN state.
Link: https://lore.kernel.org/r/20220623035052.18802-6-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to
precisely configure the low-power state of the parent of ref-clk.
Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host
hang issue by setting CLK_CG bit before host is enabled.
This operation shall have no side effect on those platforms which do not
support this bit.
Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek decides to always add delays before and after VCC is turned-off.
Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix build warnings:
1.
../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes]
int ufs_mtk_system_suspend(struct device *dev)
^
../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int ufs_mtk_system_suspend(struct device *dev)
^
static
2.
../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver);
~~~ ^~~
%d
Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.
The i2o driver layer was removed in 2015 with commit 4a72a7af46
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.
The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.
Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org
Cc: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.
Before commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.
This was in turn fixed in commit 56f396146a ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.
Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.
Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.
Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable wlen is being assigned a value that is never read, it is being
re-assigned with a different value later on. The assignment is redundant
and can be removed.
Cleans up clang scan build warning:
drivers/scsi/fcoe/fcoe.c:1491:2: warning: Value stored to 'wlen'
is never read [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220623164710.76831-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For code safety, constify arrays and pointers to data which is not
modified.
Link: https://lore.kernel.org/r/20220623102432.108059-4-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For code safety, constify pointers to data which is not modified.
Link: https://lore.kernel.org/r/20220623102432.108059-3-krzysztof.kozlowski@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It seems to me that mpt3sas driver is using dedicated workqueues and is not
calling schedule{,_delayed}_work{,_on}(). Then, there will be no work to
flush using flush_scheduled_work().
Link: https://lore.kernel.org/r/f3b97c7c-1094-4e46-20d8-4321716d6f3f@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trace events like scsi_dispatch_cmd_start and scsi_dispatch_cmd_done are
useful for tracking a command throughout its lifetime. But for some ATA
passthrough commands, the information printed in current logs is not enough
to identify and match them. For example, if two threads send SMART cmd to
the same disk at the same time, their trace logs may look the same, which
makes it hard to match scsi_dispatch_cmd_done and scsi_dispatch_cmd_start.
Printing tags can help us solve the problem. Further, if a command failed
for some reason and then is retried, its driver_tag will change. So
scheduler_tag is also included such that we can track the retries of a
command.
Link: https://lore.kernel.org/r/20220621181125.3211399-1-changyuanl@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Reviewed-by: Jolly Shah <jollys@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in _base_sas_ioc_info(). Change 'cant' to
'can't'.
Also fix up whitespace.
Link: https://lore.kernel.org/r/20220617101103.3162-1-jiaming@nfschina.com
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use ida_alloc_xxx()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Link: https://lore.kernel.org/r/20220617020430.2300-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The conn_send_pdu API is evil in that it returns a pointer to an
iscsi_task, but that task might have been freed already so you can't touch
it. This patch splits the task allocation and transmission, so functions
like iscsi_send_nopout() can access the task before its sent and do
whatever bookkeeping is needed before it is sent.
Link: https://lore.kernel.org/r/20220616224557.115234-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need the back lock when freeing a task, so we hold it when calling
__iscsi_put_task() from the completion path to make it easier and to avoid
having to retake it in that path. For iscsi_put_task() we just grabbed it
while also doing the decrement on the refcount but it's only really needed
if the refcount is zero and we free the task. This modifies
iscsi_put_task() to just take the lock when needed then has the xmit path
use it. Normally we will then not take the back lock from the xmit path. It
will only be rare cases where the network is so fast that we get a response
right after we send the header/data.
Link: https://lore.kernel.org/r/20220616224557.115234-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently require that the back_lock is held when calling the functions
that manipulate the iscsi_task refcount. The only reason for this is to
handle races where we are handling SCSI-ml EH callbacks and the cmd is
completing at the same time the normal completion path is running, and we
can't return from the EH callback until the driver has stopped accessing
the cmd. Holding the back_lock while also accessing the task->state made it
simple to check that a cmd is completing and also get/put a refcount at the
same time, and at the time we were not as concerned about performance.
The problem is that we don't want to take the back_lock from the xmit path
for normal I/O since it causes contention with the completion path if the
user has chosen to try and split those paths on different CPUs (in this
case abusing the CPUs and ignoring caching improves perf for some uses).
Begins to remove the back_lock requirement for iscsi_get/put_task by
removing the requirement for the get path. Instead of always holding the
back_lock we detect if something has done the last put and is about to call
iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the
last put on a task and only grab the back_lock if the refcount is now zero
and it's going to call iscsi_free_task().
Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 5923d64b7a ("scsi: libiscsi: Drop taskqueuelock") added an extra
task->state because for commit 6f8830f5bb ("scsi: libiscsi: add lock
around task lists to fix list corruption regression") we didn't know why we
ended up with cmds on the list and thought it might have been a bad target
sending a response while we were still sending the cmd. We were never able
to get a target to send us a response early, because it turns out the bug
was just a race in libiscsi/libiscsi_tcp where:
1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue.
2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a
r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it.
3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the
requeue list.
4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk
of data, so the cmd is done.
5. target sends the response.
6. On a different CPU from #3, iscsi_complete_task() processes the
response. Since there was no common lock for the list, the lists/tasks
pointers are not fully in sync, so could end up with list corruption.
Since it was just a race on our side, remove the extra check and fix up the
comments.
Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com
Reviewed-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For software iSCSI, we do a session per host so there is no need to set the
target's can_queue since it's the same as the host one. Setting it just
results in extra atomic checks in the main I/O path.
Link: https://lore.kernel.org/r/20220616224557.115234-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we have more data, set the MSG_SENDPAGE_NOTLAST in case we go down the
sendpage path.
Link: https://lore.kernel.org/r/20220616224557.115234-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We don't always want to run the recv path from the network softirq because
when we have to have multiple sessions sharing the same CPUs, some sessions
can eat up the NAPI softirq budget and affect other sessions or users.
Allow us to queue the recv handling to the iscsi workqueue so we can have
the scheduler/wq code try to balance the work and CPU use across all
sessions' worker threads.
Note: It wasn't the original intent of the change but a nice side effect is
that for some workloads/configs we get a nice performance boost. For a
simple read heavy test:
fio --direct=1 --filename=/dev/dm-0 --rw=randread --bs=256K
--ioengine=libaio --iodepth=128 --numjobs=4
where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32%
throughput boost. We also see increases for small I/O IOPs tests but it's
not as high.
Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.
Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.
Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.
This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.
This fixes a regression added in qedi boot with commit d1f2ce7763 ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.
Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce7763 ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There
is currently no difference in behavior between NORMAL and SHUTDOWN, but in
a subsequent commit we will want to know when we are called from the
pci_driver shutdown callout vs remove/err_handler so we know when userspace
is up.
Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
