The "find pci device" code for this driver was split between
two functions which could cause the driver to walk the pci
bus multiple times while looking for a match.
Consolidate the functions into the format that is more
standard for the comedi pci drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data variable 'plx' is an ioremap'ed pci resource and
should be a void __iomem *. This quiets a number of sparse warnings
about "different address spaces".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'got_regions' variable in the private data is used as a flag
for the detach to know if the pci device has been enabled.
Typically the dev->iobase variable is used to indicate this in
all the other comedi drivers. Do the same here for consistancy.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "find pci device" code for this driver was quite a bit
different from the other comedi pci drivers. Clean it up so
it follows the format of the other drivers.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Check for a specific bus/slot then the vendor/device ids.
The loop checking for the matching boardinfo was creating an
"id" based on the subsystem_device and subsystem_vendor info
from the pci_dev. The vendor id was already checked so just
check against the subsystem_device.
Only return the pci_dev if a matching boardinfo is found.
Consolidate the dev_err messages when a device is not found
into a single message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables and reorder the tests to make
to make the more concise.
Change the printk to a dev_err when no match is found and reword
the message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci resource bar 0 address is only used as a "flag" to
let the datach function know that the pci device has been
enabled. Use dev->iobase in the detach instead and remove
BADR0 from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci resource bar 2 address is the primary i/o address used
by this device. Store it in dev->iobase and remove it from the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci resource bar 4 address is only needed to initialize the
8255 subdevice. Use a local variable to hold it and remove it
from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci resource bar 1 address is not used in the driver. Remove
it from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unused variables from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the dev_dbg output of the pci addresses. It's just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Use ARRAY_SIZE() to determine the number of boards instead
of the hard-coded '1'.
Drop the dev_dbg for a match. It's just add noise.
Reword the dev_err when no match is found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Save the pci bar in dev->iobase instead of carrying it in the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Save the pci bar in dev->iobase so the detach is consistent with
the other comedi pci drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg for a match. It's just add noise.
Reword the dev_err when no match is found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Save the pci bar in dev->iobase so the detach is consistent with
the other comedi pci drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg for a match. It's just add noise.
Reword the dev_err when no match is found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Since the pci_dev was the only thing in the private data, remove
the struct, and it's allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg for a match. It's just add noise.
Reword the dev_err when no match is found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg message for a match. It's just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver creates a linked list of all the pci devices in
the system while it's looking for a match. It's only use is
to determine if a device is "free" to use. The pci_is_enabled()
helper can give us the same information. Use that instead and
remove the linked list.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_is_enabled() in the "find pci device" function to determine if
the found pci device is not in use and move the comedi_pci_enable() call
into the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Drop the printk error messages. They just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_is_enabled() in the "find pci device" function to determine if
the found pci device is not in use and move the comedi_pci_enable() call
into the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Drop the printk error messages. They just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a wrapper for to_pci_dev() to allow the comedi_pci_drivers
to store the pci_dev pointer in the comedi_device hw_dev variable and
retrieve it easily.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbot <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below checkpatch error was fixed,
drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following struct go on the same line
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all references of "if 0" blocks in the sbe-2t3e3 driver.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the ANSI/VITA 4.0-1995 (S2011) naming convention for the mezzanine or
daughter boards. They are called IP modules in the Standard.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue. An else statement was
not on the same line as the preceding if statement's
closing brace.
Signed-off-by: Erik Jones <erik@ejnode.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=tiQg
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-3.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO fixes for elements queued for 3.6 merge window.
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
with kthread_create we need to call wake_up_process to run the thread,
this can be done using the macro kthread_run, which creates and if thread
creation is succeeded starts the thread by calling wake_up_process,
and also there are two more threads in the rts_pstor, which calls
kthread_run instead calling kthread_create and another call to the
wake_up_process, so with this change the creation of rtsx_scan_thread
will be in consistency with the other control and poll threads.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
instead we would have used kzalloc, so our memory which is allocated will be set to 0.
codepath:
the code path here is prism2sta_probe_usb, calling when ever usb-dev id
and usb-vendor id e.t.c matches with what ever present in the MODULE_DEVICE_TABLE,
and in prism2sta_probe_usb , we call create_wlan, and its called nowhere else...
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
err can be used get return status of the usb_control_msg, rather using
nr and assigning it to err when the function returns error.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the addi driver ttl subdevices use the range table
'range_digital' provided by the comedi core. The boardinfo
value 'pr_TTLRangeList' is not used by the drivers. Remove
the unused range tables and the boardinfo pointer.
The unused range tables don't make sense anyway...
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the following fixes...
removed spaces at start of a line and used tabs
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this return is at the function end, and function is returning nothing..
i.e a void.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this function seemed bit more coding style fix...
The following fixes:
remove spaces at start of line and use tabs
use space between if and (
give a space in a multiplication operation
use space after = and another variable/constant
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Opening drivers/staging/wlags49_h2/dhf.h with vim triggered this
warning:
"drivers/staging/wlags49_h2/dhf.h" 226L, 8428C
Error detected while processing modelines:
line 2:
E518: Unknown option: */
Press ENTER or type command to continue
Since the Linux kernel coding style disallows modelines this invalid
modeline can simply be removed. And since we're touching this file we
might as well remove all vim modelines from this driver.
vim tested only.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize the device when registering it. Sometimes the user access to it
and the device is in an unknown state, so it could fail.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After opening and closing the file /dev/ipoctal.X.Y.Z for the second time, it
gives a kernel oops due to a dereference of a NULL pointer.
The problem was that tty->driver_data was not properly initialized when
accessing the file for the second time.
Reported-by: Alberto Garcia Gonzalez <agarcia@igalia.com>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macros 'update_dacsr', 'update_adcsr', and 'update_supcsr' all use
the 'devpriv' macro which uses a local variable of a specific name and
yeilds a pointer derived from that name. They are also just wrappers
around simple 'outw' calls. Remove the macros.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the data structures needed for proper registration
of OMAP5 chips. This patch includes definitions for these chip versions:
. OMAP5430
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the data structures needed for proper registration
of OMAP4 chips. This patch includes definitions for these chip versions:
. OMAP4430
. OMAP4460
. OMAP4470
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch has the common thermal framework support for OMAP
bandgap driver. It includes the zone registration and unregistration,
the cpu cooling and the trip definitions.
The trips definition is essentially one trip for passive cooling
using the generic cpu cooling device and another one for thermal
shutdown. The cpu cooling device is built based on the existing
cpu freq table. The build should be agnostic to omap version,
but relies that cpufreq is up and running by the time the driver
registers the cpu cooling, as it relies on the table walk api
from cpufreq.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the System Control Module, OMAP supplies a voltage reference
and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.
This patch provides a platform driver which expose this feature.
It is moduled as a MFD child of the System Control Module core
MFD driver.
This driver provides only APIs to access the device properties,
like temperature, thresholds and update rate.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Removed unnecessary OOM messages.
-Removed embedded message prefixes.
-Added __func__ to some pr_err messages.
-Converted printk(KERN_ERR to pr_err
-Refactored split printk strings onto a single line
-Removed the space before the '!'.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the sm7xxfb is a pci device, and should depend on the PCI.
And also if we wont' depend on the PCI sub-system, the following warns
will be triggered,
drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: data definition has no type or storage class [enabled by default]
drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: type defaults to 'int' in declaration of 'module_pci_driver' [-Wimplicit-int]
drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: parameter names (without types) in function declaration [enabled by default]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Teddy Wang <teddy.wang@siliconmotion.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
following warnings were fixed
drivers/staging/gdm72xx/gdm_qos.c:198: ERROR: "foo* bar" should be "foo *bar"
drivers/staging/gdm72xx/gdm_qos.c:198: ERROR: "foo* bar" should be "foo *bar"
drivers/staging/gdm72xx/gdm_qos.c:244: WARNING: quoted string split across lines
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in sdio probe function we are doing kmalloc which can be done using kzalloc.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the event sock check is done at the netlink_init itself.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we are doing kmalloc and memset, can be done using kzalloc itself.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
using a wrapper around SET_ETHTOOL_OPS macro is not actually required,
remove and use SET_ETHTOOL_OPS directly.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch improves coding style on smtc_alloc_fb_info.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves pseudo palette into smtcfb_info struct.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch keeps smtc_set_timing and sm7xx_set_timing functions closed
to smtcfb_setmode. This change eases reviewing and maintaining this
logic path.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sm712_set_timing handles timing for 0x710, 0x712 and 0x720 chips. This
patch renames the name of the function of sm712_set_timing to
sm7xx_set_timing.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch keeps code related to sm7xx_vga_setup closed. It is useful to
understand/maintain the logic behind sm7xx_vga_setup with a simple look.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames sm712vga_setup to sm7xx_vga_setup. sm7xx_vga_setup
process command line options in order to get the vga parameter. This
parameter will be the lookup index to match the right vesa mode. It is
chip independent.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change of name improves readability on sm712_vga_setup and
smtcfb_pci_probe. It is coherent with the name of vars being used on
code while avoiding the use of extra long lines in functions.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchs renames index var on sm712vga_setup.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames structs related to vesa modes in order to get more
readable code on sm712vga_setup.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten's recent series of patches to clean up the rtd520
driver made some of the register accesses harder to understand. Add a
few comments to provide some clues to the reader.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a couple unnecessary comments. For aesthetic reasons, add
some whitespace to the boardinfo to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the whitespace of the range tables to avoid the > 80
character lines and the ugly line breaks. Convert a couple of
the RANGE() values into the appropriate {UNI,BIP}_RANGE().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use for_each_pci_dev() instead of open-coding the for loop. Create
local variables for the bus and slot options as well as the thisboard
pointer in order to clarify the code. Consolidate the printk's when
a supported board is not found into one dev_warn message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro 'thisboard' relies on a local variable having a specific
name and yeilds a pointer derived from that local variable. Replace
the macro with a local variable where used and use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro 'devpriv' relies on a local variable having a specific
name and yeilds a pointer derived from that local variable. Replace
the macro with a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writeb'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writeb'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'readl'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writel'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writew'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>