We should set the pci driver data in probe instead of the vdpa device
adding callback. Otherwise if no vDPA device is created we will lose
the pointer to the management device.
Fixes: 6b5df347c6 ("vDPA/ifcvf: implement management netlink framework for ifcvf")
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220524055557.1938-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support HW offloaded filtering of MAC/VLAN packets.
To allow that, we add a handler to handle VLAN configurations coming
through the control VQ. Two operations are supported.
1. Adding VLAN - in this case, an entry will be added to the RX flow
table that will allow the combination of the MAC/VLAN to be
forwarded to the TIR.
2. Removing VLAN - will remove the entry from the flow table,
effectively blocking such packets from going through.
Currently the control VQ does not propagate changes to the MAC of the
VLAN device so we always use the MAC of the parent device.
Examples:
1. Create vlan device:
$ ip link add link ens1 name ens1.8 type vlan id 8
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-4-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The flow counter has been introduced in early versions of the driver to
aid in debugging. It is no longer needed and can harm performance.
Remove it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220411122942.225717-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
xen_remap() is used to establish mappings for frames not under direct
control of the kernel: for Xenstore and console ring pages, and for
grant pages of non-PV guests.
Today xen_remap() is defined to use ioremap() on x86 (doing uncached
mappings), and ioremap_cache() on Arm (doing cached mappings).
Uncached mappings for those use cases are bad for performance, so they
should be avoided if possible. As all use cases of xen_remap() don't
require uncached mappings (the mapped area is always physical RAM),
a mapping using the standard WB cache mode is fine.
As sparse is flagging some of the xen_remap() use cases to be not
appropriate for iomem(), as the result is not annotated with the
__iomem modifier, eliminate xen_remap() completely and replace all
use cases with memremap() specifying the MEMREMAP_WB caching mode.
xen_unmap() can be replaced with memunmap().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The srv_mutex is used during writeback so cifs should ensure that
allocations done when that mutex is held are done with GFP_NOFS, to
avoid having direct reclaim ending up waiting for the same mutex and
causing a deadlock. This is detected by lockdep with the splat below:
======================================================
WARNING: possible circular locking dependency detected
5.18.0 #70 Not tainted
------------------------------------------------------
kswapd0/49 is trying to acquire lock:
ffff8880195782e0 (&tcp_ses->srv_mutex){+.+.}-{3:3}, at: compound_send_recv
but task is already holding lock:
ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire
kmem_cache_alloc_trace
__request_module
crypto_alg_mod_lookup
crypto_alloc_tfm_node
crypto_alloc_shash
cifs_alloc_hash
smb311_crypto_shash_allocate
smb311_update_preauth_hash
compound_send_recv
cifs_send_recv
SMB2_negotiate
smb2_negotiate
cifs_negotiate_protocol
cifs_get_smb_ses
cifs_mount
cifs_smb3_do_mount
smb3_get_tree
vfs_get_tree
path_mount
__x64_sys_mount
do_syscall_64
entry_SYSCALL_64_after_hwframe
-> #0 (&tcp_ses->srv_mutex){+.+.}-{3:3}:
__lock_acquire
lock_acquire
__mutex_lock
mutex_lock_nested
compound_send_recv
cifs_send_recv
SMB2_write
smb2_sync_write
cifs_write
cifs_writepage_locked
cifs_writepage
shrink_page_list
shrink_lruvec
shrink_node
balance_pgdat
kswapd
kthread
ret_from_fork
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&tcp_ses->srv_mutex);
lock(fs_reclaim);
lock(&tcp_ses->srv_mutex);
*** DEADLOCK ***
1 lock held by kswapd0/49:
#0: ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat
stack backtrace:
CPU: 2 PID: 49 Comm: kswapd0 Not tainted 5.18.0 #70
Call Trace:
<TASK>
dump_stack_lvl
dump_stack
print_circular_bug.cold
check_noncircular
__lock_acquire
lock_acquire
__mutex_lock
mutex_lock_nested
compound_send_recv
cifs_send_recv
SMB2_write
smb2_sync_write
cifs_write
cifs_writepage_locked
cifs_writepage
shrink_page_list
shrink_lruvec
shrink_node
balance_pgdat
kswapd
kthread
ret_from_fork
</TASK>
Fix this by using the memalloc_nofs_save/restore APIs around the places
where the srv_mutex is held. Do this in a wrapper function for the
lock/unlock of the srv_mutex, and rename the srv_mutex to avoid missing
call sites in the conversion.
Note that there is another lockdep warning involving internal crypto
locks, which was masked by this problem and is visible after this fix,
see the discussion in this thread:
https://lore.kernel.org/all/20220523123755.GA13668@axis.com/
Link: https://lore.kernel.org/r/CANT5p=rqcYfYMVHirqvdnnca4Mo+JQSw5Qu12v=kPfpk5yhhmg@mail.gmail.com/
Reported-by: Shyam Prasad N <nspmangalore@gmail.com>
Suggested-by: Lars Persson <larper@axis.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Laurent reported the enclosed report [1]
This bug triggers with following coditions:
0) Kernel built with CONFIG_DEBUG_PREEMPT=y
1) A new passive FastOpen TCP socket is created.
This FO socket waits for an ACK coming from client to be a complete
ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
release_sock() dance.
3) While the socket is owned by the user in step 2),
a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.
Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.
Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.
[1]
BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180
caller is tcp_rtx_synack.part.0+0x36/0xc0
CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1
Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5e
check_preemption_disabled+0xde/0xe0
tcp_rtx_synack.part.0+0x36/0xc0
tcp_rtx_synack+0x8d/0xa0
? kmem_cache_alloc+0x2e0/0x3e0
? apparmor_file_alloc_security+0x3b/0x1f0
inet_rtx_syn_ack+0x16/0x30
tcp_check_req+0x367/0x610
tcp_rcv_state_process+0x91/0xf60
? get_nohz_timer_target+0x18/0x1a0
? lock_timer_base+0x61/0x80
? preempt_count_add+0x68/0xa0
tcp_v4_do_rcv+0xbd/0x270
__release_sock+0x6d/0xb0
release_sock+0x2b/0x90
sock_setsockopt+0x138/0x1140
? __sys_getsockname+0x7e/0xc0
? aa_sk_perm+0x3e/0x1a0
__sys_setsockopt+0x198/0x1e0
__x64_sys_setsockopt+0x21/0x30
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 168a8f5805 ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Missing proper sanitization for nft_set_desc_concat_parse().
2) Missing mutex in nf_tables pre_exit path.
3) Possible double hook unregistration from clean_net path.
4) Missing FLOWI_FLAG_ANYSRC flag in flowtable route lookup.
Fix incorrect source and destination address in case of NAT.
Patch from wenxu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: fix nft_flow_route source address for nat case
netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
netfilter: nf_tables: double hook unregistration in netns path
netfilter: nf_tables: hold mutex on netns pre_exit path
netfilter: nf_tables: sanitize nft_set_desc_concat_parse()
====================
Link: https://lore.kernel.org/r/20220531215839.84765-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In qdisc_run_end(), the spin_unlock() only has store-release semantic,
which guarantees all earlier memory access are visible before it. But
the subsequent test_bit() has no barrier semantics so may be reordered
ahead of the spin_unlock(). The store-load reordering may cause a packet
stuck problem.
The concurrent operations can be described as below,
CPU 0 | CPU 1
qdisc_run_end() | qdisc_run_begin()
. | .
----> /* may be reorderd here */ | .
| . | .
| spin_unlock() | set_bit()
| . | smp_mb__after_atomic()
---- test_bit() | spin_trylock()
. | .
Consider the following sequence of events:
CPU 0 reorder test_bit() ahead and see MISSED = 0
CPU 1 calls set_bit()
CPU 1 calls spin_trylock() and return fail
CPU 0 executes spin_unlock()
At the end of the sequence, CPU 0 calls spin_unlock() and does nothing
because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one
take it, until the next cpu pushing to the qdisc (if ever ...) will
notice and dequeue it.
This patch fix this by adding one explicit barrier. As spin_unlock() and
test_bit() ordering is a store-load ordering, a full memory barrier
smp_mb() is needed here.
Fixes: a90c57f2ce ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Guoju Fang <gjfang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples. Fix the warnings by removing
spurious properties or adding missing properties to the schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220526014149.2872762-1-robh@kernel.org
The Socionext interrupt controller internal to the the PCI block isn't
documented which causes warnings when unevaluatedProperties check is
also fixed. Add the 'interrupt-controller' child node and properties and
fixup the example so that interrupt properties can be parsed.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220525210117.2489333-1-robh@kernel.org
The 'unevaluatedProperties' schema checks is not fully working and doesn't
catch some cases where there's a $ref to another schema. A fix is pending,
but results in new warnings in examples.
Some DWC3 implementations such as Xilinx are hooked up coherently and need
to set the 'dma-coherent' property.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220526014118.2872057-1-robh@kernel.org
The DT example incorrectly names the ISP power domain "isp1" instead of
"isp". This causes a validation failure:
Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.example.dtb: blk-ctl@32ec0000: power-domain-names:7: 'isp' was expected
From schema: Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
Fix it.
Fixes: 8b3dd27bfe ("dt-bindings: soc: Add i.MX8MP media block control DT bindings")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220510200543.13482-1-laurent.pinchart@ideasonboard.com
- New Features:
- Add support for 'dacl' and 'sacl' attributes
- Bugfixes and Cleanups:
- Fixes for reporting mapping errors
- Fixes for memory allocation errors
- Improve warning message when locks are lost
- Update documentation for the nfs4_unique_id parameter
- Add an explanation of NFSv4 client identifiers
- Ensure the i_size attribute is written to the fscache storage
- Fix freeing uninitialized nfs4_labels
- Better handling when xprtrdma bc_serv is NULL
- Marke qualified async operations as MOVEABLE tasks
-----BEGIN PGP SIGNATURE-----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=0ccI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for 'dacl' and 'sacl' attributes
Bugfixes and Cleanups:
- Fixes for reporting mapping errors
- Fixes for memory allocation errors
- Improve warning message when locks are lost
- Update documentation for the nfs4_unique_id parameter
- Add an explanation of NFSv4 client identifiers
- Ensure the i_size attribute is written to the fscache storage
- Fix freeing uninitialized nfs4_labels
- Better handling when xprtrdma bc_serv is NULL
- Mark qualified async operations as MOVEABLE tasks"
* tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1 mark qualified async operations as MOVEABLE tasks
xprtrdma: treat all calls not a bcall when bc_serv is NULL
NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
NFS: Pass i_size to fscache_unuse_cookie() when a file is released
Documentation: Add an explanation of NFSv4 client identifiers
NFS: update documentation for the nfs4_unique_id parameter
NFS: Improve warning message when locks are lost.
NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes
NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes
NFSv4: Specify the type of ACL to cache
NFSv4: Don't hold the layoutget locks across multiple RPC calls
pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors
NFS: Further fixes to the writeback error handling
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
NFS: Memory allocation failures are not server fatal errors
NFS: Don't report errors from nfs_pageio_complete() more than once
NFS: Do not report flush errors in nfs_write_end()
NFS: Don't report ENOSPC write errors twice
NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
In this round, we've refactored the existing atomic write support implemented
by in-memory operations to have storing data in disk temporarily, which can give
us a benefit to accept more atomic writes. At the same time, we removed the
existing volatile write support. We've also revisited the file pinning and GC
flows and found some corner cases which contributeed abnormal system behaviours.
As usual, there're several minor code refactoring for readability, sanity check,
and clean ups.
Enhancement
- allow compression for mmap files in compress_mode=user
- kill volatile write support
- change the current atomic write way
- give priority to select unpinned section for foreground GC
- introduce data read/write showing path info
- remove unnecessary f2fs_lock_op in f2fs_new_inode
Bug fix
- fix the file pinning flow during checkpoint=disable and GCs
- fix foreground and background GCs to select the right victims and get free
sections on time
- fix GC flags on defragmenting pages
- avoid an infinite loop to flush node pages
- fix fallocate to use file_modified to update permissions consistently
-----BEGIN PGP SIGNATURE-----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=ta8Y
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've refactored the existing atomic write support
implemented by in-memory operations to have storing data in disk
temporarily, which can give us a benefit to accept more atomic writes.
At the same time, we removed the existing volatile write support.
We've also revisited the file pinning and GC flows and found some
corner cases which contributeed abnormal system behaviours.
As usual, there're several minor code refactoring for readability,
sanity check, and clean ups.
Enhancements:
- allow compression for mmap files in compress_mode=user
- kill volatile write support
- change the current atomic write way
- give priority to select unpinned section for foreground GC
- introduce data read/write showing path info
- remove unnecessary f2fs_lock_op in f2fs_new_inode
Bug fixes:
- fix the file pinning flow during checkpoint=disable and GCs
- fix foreground and background GCs to select the right victims and
get free sections on time
- fix GC flags on defragmenting pages
- avoid an infinite loop to flush node pages
- fix fallocate to use file_modified to update permissions
consistently"
* tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to tag gcing flag on page during file defragment
f2fs: replace F2FS_I(inode) and sbi by the local variable
f2fs: add f2fs_init_write_merge_io function
f2fs: avoid unneeded error handling for revoke_entry_slab allocation
f2fs: allow compression for mmap files in compress_mode=user
f2fs: fix typo in comment
f2fs: make f2fs_read_inline_data() more readable
f2fs: fix to do sanity check for inline inode
f2fs: fix fallocate to use file_modified to update permissions consistently
f2fs: don't use casefolded comparison for "." and ".."
f2fs: do not stop GC when requiring a free section
f2fs: keep wait_ms if EAGAIN happens
f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters
f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION
f2fs: kill volatile write support
f2fs: change the current atomic write way
f2fs: don't need inode lock for system hidden quota
f2fs: stop allocating pinned sections if EAGAIN happens
f2fs: skip GC if possible when checkpoint disabling
f2fs: give priority to select unpinned section for foreground GC
...
as this is the only way to make sure the region is allocated.
Fix the conditional that was wrong and only tried to make already
non-sparse files non-sparse.
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
LPG. Apparently it drives backlight on some boards, so it is quite
important for some people.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCYpZ0rAAKCRAw5/Bqldv6
8pH4AJ9cxxetf4/p1NtPPUl0eucqDXQlcACgnCWjGLrrjgkkY45OThDLPLbuplg=
=ipf/
-----END PGP SIGNATURE-----
Merge tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Most significant here is the driver for Qualcomm LPG. Apparently it
drives backlight on some boards, so it is quite important for some
people"
* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: qcom-lpg: Require pattern to follow documentation
leds: lp50xx: Remove duplicated error reporting in .remove()
leds: qcom-lpg: add missing PWM dependency
leds: ktd2692: Make aux-gpios optional
dt-bindings: leds: convert ktd2692 bindings to yaml
leds: ktd2692: Avoid duplicate error messages on probe deferral
leds: is31fl32xx: Improve error reporting in .remove()
leds: Move pwm-multicolor driver into rgb directory
leds: Add PWM multicolor driver
dt-bindings: leds: Add multicolor PWM LED bindings
dt-bindings: leds: Optional multi-led unit address
leds: regulator: Make probeable from device tree
leds: regulator: Add dev helper variable
dt-bindings: leds: Add regulator-led binding
leds: pca9532: Make pca9532_destroy_devices() return void
leds: Add pm8350c support to Qualcomm LPG driver
dt-bindings: leds: Add pm8350c pmic support
leds: Add driver for Qualcomm LPG
dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
I2C has only driver updates for 5.19. Bigger changes are for Meson,
NPCM, and R-Car, but there are also changes all over the place.
-----BEGIN PGP SIGNATURE-----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=vdUW
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Only driver updates for 5.19.
Bigger changes are for Meson, NPCM, and R-Car, but there are also
changes all over the place"
* tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: meson: fix typo in comment
i2c: rcar: use flags instead of atomic_xfer
i2c: rcar: REP_AFTER_RD is not a persistent flag
i2c: rcar: use BIT macro consistently
i2c: qcom-geni: remove unnecessary conditions
i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
i2c: rcar: refactor handling of first message
i2c: rcar: avoid race condition with SMIs
i2c: xiic: Correct the datatype for rx_watermark
i2c: rcar: fix PM ref counts in probe error paths
i2c: npcm: Handle spurious interrupts
i2c: npcm: Correct register access width
i2c: npcm: Add tx complete counter
i2c: npcm: Fix timeout calculation
i2c: npcm: Remove unused variable clk_regmap
i2c: npcm: Change the way of getting GCR regmap
i2c: xiic: Fix Tx Interrupt path for grouped messages
i2c: xiic: Fix coding style issues
i2c: xiic: return value of xiic_reinit
i2c: cadence: Increase timeout per message if necessary
...
For snat and dnat cases, the saddr should be taken from reverse tuple.
Fixes: 3412e16418 (netfilter: flowtable: nft_flow_route use more data for reverse route)
Signed-off-by: wenxu <wenxu@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nf_flow_table gets route through ip_route_output_key. If the saddr
is not local one, then FLOWI_FLAG_ANYSRC flag should be set. Without
this flag, the route lookup for other_dst will fail.
Fixes: 3412e16418 (netfilter: flowtable: nft_flow_route use more data for reverse route)
Signed-off-by: wenxu <wenxu@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
__nft_release_hooks() is called from pre_netns exit path which
unregisters the hooks, then the NETDEV_UNREGISTER event is triggered
which unregisters the hooks again.
[ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270
[...]
[ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27
[ 565.253682] Workqueue: netns cleanup_net
[ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270
[...]
[ 565.297120] Call Trace:
[ 565.300900] <TASK>
[ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables]
[ 565.308518] raw_notifier_call_chain+0x63/0x80
[ 565.312386] unregister_netdevice_many+0x54f/0xb50
Unregister and destroy netdev hook from netns pre_exit via kfree_rcu
so the NETDEV_UNREGISTER path see unregistered hooks.
Fixes: 767d1216bf ("netfilter: nftables: fix possible UAF over chains from packet path in netns")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
clean_net() runs in workqueue while walking over the lists, grab mutex.
Fixes: 767d1216bf ("netfilter: nftables: fix possible UAF over chains from packet path in netns")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add several sanity checks for nft_set_desc_concat_parse():
- validate desc->field_count not larger than desc->field_len array.
- field length cannot be larger than desc->field_len (ie. U8_MAX)
- total length of the concatenation cannot be larger than register array.
Joint work with Florian Westphal.
Fixes: f3a2181e16 ("netfilter: nf_tables: Support for sets with multiple ranged fields")
Reported-by: <zhangziming.zzm@antgroup.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Support for the Svpbmt extension, which allows memory attributes to be
encoded in pages.
* Support for the Allwinner D1's implementation of page-based memory
attributes.
* Support for running rv32 binaries on rv64 systems, via the compat
subsystem.
* Support for kexec_file().
* Support for the new generic ticket-based spinlocks, which allows us to
also move to qrwlock. These should have already gone in through the
asm-geneic tree as well.
* A handful of cleanups and fixes, include some larger ones around
atomics and XIP.
-----BEGIN PGP SIGNATURE-----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=Loi6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.
Fixes: 85e39feead ("NFSv4.1 identify and mark RPC tasks that can move between transports")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr. We end up growing two more allocations, but this
fixes up a crash as:
PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls"
#0 [ffffc90000857920] panic at ffffffff81b9bfde
#1 [ffffc900008579c0] do_trap at ffffffff81023a9b
#2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
#3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
#4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
#5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
#6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
#7 [ffffc90000857c60] walk_component at ffffffff813a86c4
#8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
#9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a007db ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In some use-cases, mlx5 instances will need to search for their peer
device (the other port on the same HCA). For that, mlx5 device matching
mechanism relied on auxiliary_find_device() to search, and used a bad matching
callback function.
This approach has two issues:
1) next_phys_dev() the matching function, assumed all devices are
of the type mlx5_adev (mlx5 auxiliary device) which is wrong and
could lead to crashes, this worked for a while, since only lately
other drivers started registering auxiliary devices.
2) using the auxiliary class bus (auxiliary_find_device) to search for
mlx5_core_dev devices, who are actually PCIe device instances, is wrong.
This works since mlx5_core always has at least one mlx5_adev instance
hanging around in the aux bus.
As suggested by others we can fix 1. by comparing device names prefixes
if they have the string "mlx5_core" in them, which is not a best practice !
but even with that fixed, still 2. needs fixing, we are trying to
match pcie device peers so we should look in the right bus (pci bus),
hence this fix.
The fix:
1) search the pci bus for mlx5 peer devices, instead of the aux bus
2) to validated devices are the same type "mlx5_core_dev" compare if
they have the same driver, which is bulletproof.
This wouldn't have worked with the aux bus since the various mlx5 aux
device types don't share the same driver, even if they share the same device
wrapper struct (mlx5_adev) "which helped to find the parent device"
Fixes: a925b5e309 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reported-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Some features (LRO, HW GRO) conflict with XDP. If there is an attempt to
enable such features while XDP is active, they will be set to `off
[requested on]`. In order to activate these features after XDP is turned
off, the driver needs to call netdev_update_features(). This commit adds
this missing call after XDP state changes.
Fixes: cf6e34c8c2 ("net/mlx5e: Properly block LRO when XDP is enabled")
Fixes: b0617e7b35 ("net/mlx5e: Properly block HW GRO when XDP is enabled")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ECE field should be after opt_param_mask in query qp output.
Fixes: 6b646a7e4a ("net/mlx5: Add ability to read and write ECE options")
Signed-off-by: Changcheng Liu <jerrliu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the driver activates the channels, it assumes NAPI isn't running
yet. mlx5e_activate_rq posts a NOP WQE to ICOSQ to trigger a hardware
interrupt and start NAPI, which will run mlx5e_alloc_rx_mpwqe and post
UMR WQEs to ICOSQ to be able to receive packets with striding RQ.
Unfortunately, a race condition is possible if NAPI is triggered by
something else (for example, TX) at a bad timing, before
mlx5e_activate_rq finishes. In this case, mlx5e_alloc_rx_mpwqe may post
UMR WQEs to ICOSQ, and with the bad timing, the wqe_info of the first
UMR may be overwritten by the wqe_info of the NOP posted by
mlx5e_activate_rq.
The consequence is that icosq->db.wqe_info[0].num_wqebbs will be changed
from MLX5E_UMR_WQEBBS to 1, disrupting the integrity of the array-based
linked list in wqe_info[]. mlx5e_poll_ico_cq will hang in an infinite
loop after processing wqe_info[0], because after the corruption, the
next item to be processed will be wqe_info[1], which is filled with
zeros, and `sqcc += wi->num_wqebbs` will never move further.
This commit fixes this race condition by using async_icosq to post the
NOP and trigger the interrupt. async_icosq is always protected with a
spinlock, eliminating the race condition.
Fixes: bc77b240b3 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reported-by: Karsten Nielsen <karsten@foo-bar.dk>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tuple entries that don't have nat configured for them
which are added to the ct nat table will always create
a new modify header, as we don't check for possible
re-use on them. The same for tuples that have nat configured
for them but are added to ct table.
Fix the above by only avoiding wasteful re-use lookup
for actually natted entries in ct nat table.
Fixes: 7fac5c2ece ("net/mlx5: CT: Avoid reusing modify header context for natted entries")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit changed promisc table to be created on demand with the
highest priority in the NIC table replacing the vlan table, this caused
tc NIC tables miss flow to skip the prmoisc table because it use vlan
table as miss table.
OVS offload in NIC mode use promisc by default so any unicast packet
which will be handled by tc NIC tables miss flow will skip the promisc
rule and will be dropped.
Fix this by adding new empty table in new tc level with low priority and
point the nic tc chain miss to it, the new table is managed so it will
point to vlan table if promisc is disabled and to promisc table if enabled.
Fixes: 1c46d7409f ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The call to mlx5dr_action_destroy() releases "action" memory. That
pointer is set to miss_action later and generates the following smatch
error:
drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c:53 set_miss_action()
warn: 'action' was already freed.
Make sure that the pointer is always valid by setting NULL after destroy.
Fixes: 6a48faeeca ("net/mlx5: Add direct rule fs_cmd implementation")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.
Fixes: a4ffc15219 ("dm: add verity target")
Cc: stable@vger.kernel.org
Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Similar message is printed a few lines later in the same function
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
I will soon lose my @arm.com email address, so to prevent any possible
issue let's update all kernel references (inclusive of .mailmap) to my
@kernel.org alias ahead of time.
My @arm.com address is still working and will likely resume to work at some
point in the future; nonetheless, it is safer to switch to the @kernel.org
alias from now onwards so that continuity is guaranteed.
Link: https://lore.kernel.org/r/20220528151411.29810-1-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
92597f97a4 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry. Add the appropriate braces.
Found by:
$ make W=1 drivers/pci/pci.o
CC drivers/pci/pci.o
drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
2974 | .ident = "Elo i2",
| ^~~~~~~~
Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes: 92597f97a4 ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
This reverts commit 830aa6f29f.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 67211aadcb.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 93e41f3fca.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-3-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 11ed8b8624.
This is part of a revert of the following commits:
11ed8b8624 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-2-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It was reported that the "generic/250" test in xfstests (which uses
the dm-error target) demonstrates a regression where the kernel
crashes in bioset_exit().
Since commit cfc97abcbe ("dm: conditionally enable
BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io
bioset will setup the bioset's per-cpu alloc cache if all devices have
QUEUE_FLAG_POLL set.
But there was an bug where a target that doesn't have any data devices
(and that doesn't even set the .iterate_devices dm target callback)
will incorrectly return true from dm_table_supports_poll().
Fix this by updating dm_table_supports_poll() to follow dm-table.c's
well-worn pattern for testing that _all_ targets in a DM table do in
fact have underlying devices that set QUEUE_FLAG_POLL.
NOTE: An additional block fix is still needed so that
bio_alloc_cache_destroy() clears the bioset's ->cache member.
Otherwise, a DM device's table reload that transitions the DM device's
bioset from using a per-cpu alloc cache to _not_ using one will result
in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's
dm_io bioset ("io_bs") was left with a stale ->cache member.
Fixes: cfc97abcbe ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset")
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
- Fix issues with freestanding
- Wire memblock_dump_all()
- Add support for memory reservation from DT
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYpW+twAKCRDKSWXLKUoM
IVdaAJ9xpATIDEDM4S6jq5EpjHbsexA7IgCdG1ewTy0ynVvP1sbVUZzkUaxbe/0=
=6/ET
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Fix issues with freestanding
- Wire memblock_dump_all()
- Add support for memory reservation from DT
* tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: fix typos in comments
microblaze: Add support for reserved memory defined by DT
microblaze: Wire memblock_dump_all()
microblaze: Use simple memmove/memcpy implementation from lib/string.c
microblaze: Do loop unrolling for optimized memset implementation
microblaze: Use simple memset implementation from lib/string.c
This patch renames vhost_work_dev_flush to just vhost_dev_flush to
relfect that it flushes everything on the device and that drivers
don't know/care that polls are based on vhost_works. Drivers just
flush the entire device and polls, and works for vhost-scsi
management TMFs and IO net virtqueues, etc all are flushed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220517180850.198915-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The flush after vhost_dev_cleanup is not needed because:
1. It doesn't do anything. vhost_dev_cleanup will stop the worker thread
so the flush call will just return since the worker has not device.
2. It's not needed. The comment about jobs re-queueing themselves does
not look correct because handle_vq does not requeue work.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220517180850.198915-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The flush after vhost_dev_cleanup is not needed because:
1. It doesn't do anything. vhost_dev_cleanup will stop the worker thread
so the flush call will just return since the worker has not device.
2. It's not needed for the re-queue case. vhost_scsi_evt_handle_kick grabs
the mutex and if the backend is NULL will return without queueing a work.
vhost_scsi_clear_endpoint will set the backend to NULL under the vq->mutex
then drops the mutex and does a flush. So we know when
vhost_scsi_clear_endpoint has dropped the mutex after clearing the backend
no evt related work will be able to requeue. The flush would then make sure
any queued evts are run and return.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220517180850.198915-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_vsock_flush() calls vhost_work_dev_flush(vsock->vqs[i].poll.dev)
before vhost_work_dev_flush(&vsock->dev). This seems pointless
as vsock->vqs[i].poll.dev is the same as &vsock->dev and several flushes
in a row doesn't do anything useful, one is just enough.
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220517180850.198915-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
